February 2024 - U-Boot

[PATCH v4] rockchip: spl: Enable caches to speed up checksum validation
by Jonas Karlman 17 Feb '24

17 Feb '24

FIT checksum validation is very slow in SPL due to D-cache not being enabled. Enable caches in SPL on ARM64 SoCs to speed up FIT checksum validation, from seconds to milliseconds. This change enables caches in SPL on all Rockchip ARM64 boards, the Kconfig options SPL_SYS_ICACHE_OFF and SPL_SYS_DCACHE_OFF can be used to disable caches for a specific board or SoC if needed. Signed-off-by: Jonas Karlman <jonas(a)kwiboo.se> Reviewed-by: Kever Yang <kever.yang(a)rock-chips.com> --- Changes in v4: - Include cpu_func.h to fix build on armv7 - Remove common.h include Changes in v3: - Limit to ARM64 SoCs - Fix build with SPL_SYS_ICACHE_OFF or SPL_SYS_DCACHE_OFF enabled - Use cleanup_before_linux() in spl_board_prepare_for_boot() to disable caches before jumping from SPL to next stage - Collect r-b tag Changes in v2: - None This has been tested on multiple RK3328, RK3399, RK356x and RK3588 boards without any issues, vendor U-Boot also enables caches in SPL for all SoCs. This only worked on RK3288 because the default enable_caches() that does not enable caches was being used. Trying to enable caches on my RK3288 froze my boards in mmu_setup(). So v3 limits the enable_caches() call to only include ARM64 SoCs. Link to RFC: https://patchwork.ozlabs.org/patch/1802303/ Link to v2: https://patchwork.ozlabs.org/patch/1889319/ Link to v3: https://patchwork.ozlabs.org/patch/1891025/ --- arch/arm/mach-rockchip/spl.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c index 87280e2ba7cc..1586a093fc37 100644 --- a/arch/arm/mach-rockchip/spl.c +++ b/arch/arm/mach-rockchip/spl.c @@ -3,7 +3,7 @@ * (C) Copyright 2019 Rockchip Electronics Co., Ltd */ -#include <common.h> +#include <cpu_func.h> #include <debug_uart.h> #include <dm.h> #include <hang.h> @@ -136,6 +136,20 @@ void board_init_f(ulong dummy) } gd->ram_top = gd->ram_base + get_effective_memsize(); gd->ram_top = board_get_usable_ram_top(gd->ram_size); + + if (IS_ENABLED(CONFIG_ARM64) && !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) { + gd->relocaddr = gd->ram_top; + arch_reserve_mmu(); + enable_caches(); + } #endif preloader_console_init(); } + +void spl_board_prepare_for_boot(void) +{ + if (!IS_ENABLED(CONFIG_ARM64) || CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return; + + cleanup_before_linux(); +} -- 2.43.0

2 1

[PATCH v3 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B
by Andy Yan 17 Feb '24

17 Feb '24

CoolPi 4B is a rk3588s based SBC. Specification: - Rockchip RK3588S - LPDDR4 2/4/8/16 GB - TF scard slot - eMMC 8/32/64/128 GB module - SPI Nor 8MB - Gigabit ethernet drived by PCIE with RTL8111HS - HDMI Type D out - Mini DP out - USB 2.0 Host x 2 - USB 3.0 OTG x 1 - USB 3.0 Host x 1 - WIFI/BT module AIC8800 - 40 pin header The dts is from linux-6.8 rc1. Signed-off-by: Andy Yan <andyshrk(a)163.com> Reviewed-by: Kever Yang <kever.yang(a)rock-chips.com> [0]https://patchwork.kernel.org/project/linux-rockchip/patch/2450634.jE0xQCE… --- Changes in v3: - remove spl-boot-order as it is already in rk3588s-u-boot.dtsi - Enable MMC_HS400 and MMC_HS400_ES as suggestted by Quentin Changes in v2: - sync dts from linux-rockchip which will be in linux-6.8 rc6[0] arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi | 29 + arch/arm/dts/rk3588s-coolpi-4b.dts | 812 +++++++++++++++++++++ board/rockchip/evb_rk3588/MAINTAINERS | 7 + configs/coolpi-4b-rk3588s_defconfig | 113 +++ 5 files changed, 962 insertions(+) create mode 100644 arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-coolpi-4b.dts create mode 100644 configs/coolpi-4b-rk3588s_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ce10d3dbb0..ae7c088ceb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -190,6 +190,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3568-rock-3a.dtb dtb-$(CONFIG_ROCKCHIP_RK3588) += \ + rk3588s-coolpi-4b.dts \ rk3588-edgeble-neu6a-io.dtb \ rk3588-edgeble-neu6b-io.dtb \ rk3588-evb1-v10.dtb \ diff --git a/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi new file mode 100644 index 0000000000..6e4b97028d --- /dev/null +++ b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3588s-u-boot.dtsi" + +&fspim2_pins { + bootph-all; +}; + +&sdhci { + cap-mmc-highspeed; + mmc-hs200-1_8v; +}; + +&sfc { + bootph-pre-ram; + u-boot,spl-sfc-no-dma; + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + bootph-pre-ram; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; diff --git a/arch/arm/dts/rk3588s-coolpi-4b.dts b/arch/arm/dts/rk3588s-coolpi-4b.dts new file mode 100644 index 0000000000..e037bf9db7 --- /dev/null +++ b/arch/arm/dts/rk3588s-coolpi-4b.dts @@ -0,0 +1,812 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "RK3588S CoolPi 4 Model B"; + compatible = "coolpi,pi-4b", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led0: led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led1: led-red { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vcc3v3_mipi: vcc3v3-mipi-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_mipi"; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_u3host_en>; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&rtl8111_isolate>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + led { + gpio_leds: gpio-leds { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>, + <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_u3host_en: vcc5v0-u3host-en { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_reset_gpio: bt-reset-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_gpio: bt-wake-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_poweren_pin: wifi-poweren-pin { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm13m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* bt */ +&uart9 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/board/rockchip/evb_rk3588/MAINTAINERS b/board/rockchip/evb_rk3588/MAINTAINERS index 2bd44bc587..1604229759 100644 --- a/board/rockchip/evb_rk3588/MAINTAINERS +++ b/board/rockchip/evb_rk3588/MAINTAINERS @@ -1,3 +1,10 @@ +COOLPI-4B-RK3588S +M: Andy Yan <andyshrk(a)163.com> +S: Maintained +F: configs/coolpi-4b-rk3588s_defconfig +F: arch/arm/dts/rk3588s-coolpi-4b.dts +F: arch/arm/dts/rk3588s-coolpi-u-boot.dtsi + EVB-RK3588 M: Kever Yang <kever.yang(a)rock-chips.com> S: Maintained diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig new file mode 100644 index 0000000000..0dc5c3c716 --- /dev/null +++ b/configs/coolpi-4b-rk3588s_defconfig @@ -0,0 +1,113 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588s-coolpi-4b" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_EVB_RK3588=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-coolpi-4b.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_PHY_MOTORCOMM=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y -- 2.34.1

1 1

[PATCH 1/1] efi_loader: ignore device-tree in ACPI case
by Heinrich Schuchardt 17 Feb '24

17 Feb '24

If a device-tree is passed to the bootefi command while using ACPI, we currently only show a warning that the device-tree will be ignored. But we use that device-tree to create memory reservations. To be consistent we need to fallback to the internal device-tree. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- lib/efi_loader/efi_helper.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/lib/efi_loader/efi_helper.c b/lib/efi_loader/efi_helper.c index 5dd9cc876e..e2f547b3cd 100644 --- a/lib/efi_loader/efi_helper.c +++ b/lib/efi_loader/efi_helper.c @@ -422,8 +422,11 @@ efi_status_t efi_install_fdt(void *fdt) * The EBBR spec requires that we have either an FDT or an ACPI table * but not both. */ - if (CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) && fdt) + if (CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) && + fdt != EFI_FDT_USE_INTERNAL) { + fdt = EFI_FDT_USE_INTERNAL; log_warning("WARNING: Can't have ACPI table and device tree - ignoring DT.\n"); + } if (fdt == EFI_FDT_USE_INTERNAL) { const char *fdt_opt; -- 2.43.0

1 0

[PATCH 1/2] doc: Update our clang documentation to reflect current status
by Tom Rini 16 Feb '24

16 Feb '24

First, since this document was written the biggest challenges at the time are simply not applicable anymore. Second, we need to list the challenges which are preventing more platforms from being able to be built with Clang today. Next, we update the general wording to be host distribution agnostic. Finally, the section about xenguest_arm64 issues is not present anymore. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- Cc: Mark Kettenis <kettenis(a)openbsd.org> This does leave the FreeBSD section unchanged and should likely be looked at again by someone with a BSD build machine available. --- doc/build/clang.rst | 85 +++++++++++---------------------------------- 1 file changed, 21 insertions(+), 64 deletions(-) diff --git a/doc/build/clang.rst b/doc/build/clang.rst index 09bb988e9236..d8c554982567 100644 --- a/doc/build/clang.rst +++ b/doc/build/clang.rst @@ -1,34 +1,27 @@ Building with Clang =================== -The biggest problem when trying to compile U-Boot with Clang is that almost all -archs rely on storing gd in a global register and the Clang 3.5 user manual -states: "Clang does not support global register variables; this is unlikely to -be implemented soon because it requires additional LLVM backend support." - -The ARM backend can be instructed not to use the r9 and x18 registers using --ffixed-r9 or -ffixed-x18 respectively. As global registers themselves are not -supported inline assembly is needed to get and set the r9 or x18 value. This -leads to larger code then strictly necessary, but at least works. - -Debian based ------------- - -Required packages can be installed via apt, e.g. - -.. code-block:: bash - - sudo apt-get install clang - -We make use of the CROSS_COMPILE variable to derive the build target which is -passed as the --target parameter to clang. - -The CROSS_COMPILE variable further determines the paths to other build -tools. As assembler we use the binary pointed to by '$(CROSS_COMPILE)as' -instead of the LLVM integrated assembler (IAS). - -Here is an example demonstrating building U-Boot for the Raspberry Pi 2 -using clang: +In general terms, U-Boot support building with Clang as the C compiler and +building and booting our "sandbox" target is part of CI. + +There are however some specific issues that need to be addressed to fully +support building with Clang on all targets. + +* Given the issue reported in https://github.com/llvm/llvm-project/issues/78778 + currently one has to configure the build first with GCC. +* Support for passing the correct flags along to `$(CPP)` needs to be + backported from the Linux Kernel. +* Support for using Clang as the linker is required to support the LTO feature + which some platforms require in order to create an appropriately small + binary. + +In general, when building with Clang we make use of the CROSS_COMPILE variable +to derive the build target which is passed as the --target parameter to clang. +The CROSS_COMPILE variable further determines the paths to other build tools. +As assembler we use the binary pointed to by '$(CROSS_COMPILE)as' instead of +the LLVM integrated assembler (IAS). After installing clang as per the +instructions for your specific distribution, in order to build for example the +Raspberry Pi 2 using clang: .. code-block:: bash @@ -72,39 +65,3 @@ simplified with a simple wrapper script - saved as #!/bin/sh exec clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd "$@" - - -Known Issues ------------- - -When build U-boot for `xenguest_arm64_defconfig` target, it reports linkage -error: - -.. code-block:: bash - - aarch64-linux-gnu-ld.bfd: drivers/xen/hypervisor.o: in function `do_hypervisor_callback': - /home/leoy/Dev2/u-boot/drivers/xen/hypervisor.c:188: undefined reference to `__aarch64_swp8_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/hypervisor.o: in function `synch_test_and_set_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:40: undefined reference to `__aarch64_ldset1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/hypervisor.o: in function `synch_test_and_clear_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:28: undefined reference to `__aarch64_ldclr1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/hypervisor.o: in function `synch_test_and_set_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:40: undefined reference to `__aarch64_ldset1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/hypervisor.o: in function `synch_test_and_clear_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:28: undefined reference to `__aarch64_ldclr1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/events.o: in function `synch_test_and_clear_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:28: undefined reference to `__aarch64_ldclr1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/events.o: in function `synch_test_and_set_bit': - /home/leoy/Dev2/u-boot/./arch/arm/include/asm/xen/system.h:40: undefined reference to `__aarch64_ldset1_acq_rel' - aarch64-linux-gnu-ld.bfd: drivers/xen/gnttab.o: in function `gnttab_end_access': - /home/leoy/Dev2/u-boot/drivers/xen/gnttab.c:109: undefined reference to `__aarch64_cas2_acq_rel' - Segmentation fault - -To fix the failure, we need to append option `-mno-outline-atomics` in Clang -command to not generate local calls to out-of-line atomic operations: - -.. code-block:: bash - - make HOSTCC=clang xenguest_arm64_defconfig - make HOSTCC=clang CROSS_COMPILE=aarch64-linux-gnu- \ - CC="clang -target aarch64-linux-gnueabi -mno-outline-atomics" -j8 -- 2.34.1

3 13

[PATCH v2 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B
by Andy Yan 16 Feb '24

16 Feb '24

CoolPi 4B is a rk3588s based SBC. Specification: - Rockchip RK3588S - LPDDR4 2/4/8/16 GB - TF scard slot - eMMC 8/32/64/128 GB module - SPI Nor 8MB - Gigabit ethernet drived by PCIE with RTL8111HS - HDMI Type D out - Mini DP out - USB 2.0 Host x 2 - USB 3.0 OTG x 1 - USB 3.0 Host x 1 - WIFI/BT module AIC8800 - 40 pin header The dts is from linux-6.8 rc1. Signed-off-by: Andy Yan <andyshrk(a)163.com> Reviewed-by: Kever Yang <kever.yang(a)rock-chips.com> --- Changes in v2: - sync dts from linux-rockchip which will be in linux-6.8 rc6[0] [0]https://patchwork.kernel.org/project/linux-rockchip/patch/2450634.jE0xQCE… arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi | 30 + arch/arm/dts/rk3588s-coolpi-4b.dts | 812 +++++++++++++++++++++ board/rockchip/evb_rk3588/MAINTAINERS | 7 + configs/coolpi-4b-rk3588s_defconfig | 105 +++ 5 files changed, 955 insertions(+) create mode 100644 arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588s-coolpi-4b.dts create mode 100644 configs/coolpi-4b-rk3588s_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ce10d3dbb0..ae7c088ceb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -190,6 +190,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3568-rock-3a.dtb dtb-$(CONFIG_ROCKCHIP_RK3588) += \ + rk3588s-coolpi-4b.dts \ rk3588-edgeble-neu6a-io.dtb \ rk3588-edgeble-neu6b-io.dtb \ rk3588-evb1-v10.dtb \ diff --git a/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi new file mode 100644 index 0000000000..6b69ff424f --- /dev/null +++ b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3588s-u-boot.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci; + }; +}; + +&fspim2_pins { + bootph-all; +}; + +&sfc { + bootph-pre-ram; + u-boot,spl-sfc-no-dma; + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; + status = "okay"; + + flash@0 { + bootph-pre-ram; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; diff --git a/arch/arm/dts/rk3588s-coolpi-4b.dts b/arch/arm/dts/rk3588s-coolpi-4b.dts new file mode 100644 index 0000000000..e037bf9db7 --- /dev/null +++ b/arch/arm/dts/rk3588s-coolpi-4b.dts @@ -0,0 +1,812 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "RK3588S CoolPi 4 Model B"; + compatible = "coolpi,pi-4b", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led0: led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led1: led-red { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vcc3v3_mipi: vcc3v3-mipi-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_mipi"; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_u3host_en>; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&rtl8111_isolate>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + led { + gpio_leds: gpio-leds { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>, + <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_u3host_en: vcc5v0-u3host-en { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_reset_gpio: bt-reset-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_gpio: bt-wake-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_poweren_pin: wifi-poweren-pin { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm13m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* bt */ +&uart9 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/board/rockchip/evb_rk3588/MAINTAINERS b/board/rockchip/evb_rk3588/MAINTAINERS index 2bd44bc587..1604229759 100644 --- a/board/rockchip/evb_rk3588/MAINTAINERS +++ b/board/rockchip/evb_rk3588/MAINTAINERS @@ -1,3 +1,10 @@ +COOLPI-4B-RK3588S +M: Andy Yan <andyshrk(a)163.com> +S: Maintained +F: configs/coolpi-4b-rk3588s_defconfig +F: arch/arm/dts/rk3588s-coolpi-4b.dts +F: arch/arm/dts/rk3588s-coolpi-u-boot.dtsi + EVB-RK3588 M: Kever Yang <kever.yang(a)rock-chips.com> S: Maintained diff --git a/configs/coolpi-4b-rk3588s_defconfig b/configs/coolpi-4b-rk3588s_defconfig new file mode 100644 index 0000000000..3e3e5abc86 --- /dev/null +++ b/configs/coolpi-4b-rk3588s_defconfig @@ -0,0 +1,105 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=24000000 +CONFIG_ARCH_ROCKCHIP=y +CONFIG_TEXT_BASE=0x00a00000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 +CONFIG_SF_DEFAULT_SPEED=24000000 +CONFIG_SF_DEFAULT_MODE=0x2000 +CONFIG_DEFAULT_DEVICE_TREE="rk3588s-coolpi-4b" +CONFIG_ROCKCHIP_RK3588=y +CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_SPI_IMAGE=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_TARGET_EVB_RK3588=y +CONFIG_SPL_STACK=0x400000 +CONFIG_DEBUG_UART_BASE=0xFEB50000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y +CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-coolpi-4b.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 +CONFIG_SPL_ATF=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_REGMAP=y +CONFIG_SPL_SYSCON=y +CONFIG_AHCI_PCI=y +CONFIG_DWC_AHCI=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_SF_DEFAULT_BUS=5 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_PHY_MOTORCOMM=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y +CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y +CONFIG_PHY_ROCKCHIP_USBDP=y +CONFIG_SPL_PINCTRL=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_SPL_RAM=y +CONFIG_SCSI=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SFC=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_ERRNO_STR=y -- 2.34.1

2 7

verdin-imx8mp: Ethernet does not load at boot
by Sahaj Sarup 16 Feb '24

16 Feb '24

Hi, On a verdin-imx8mp platform I am now unable to use the ethernet ports. My last build was from December (8f5043ee6d378d7c10d947cf48b047a5954ef5b3) so it was working fine then. Boot log: ``` U-Boot SPL 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530) Training FAILED DDR configured as single rank SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) Trying to boot from BOOTROM Boot Stage: Primary boot Find img info 0x4802ae00, size 1044 Need continue download 1024 NOTICE: Do not release JR0 to NS as it can be used by HAB NOTICE: BL31: v2.10.0 (release):v2.10.0-44-g2e1e1664c NOTICE: BL31: Built : 13:09:20, Dec 1 2023 U-Boot 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530) CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR DRAM: 4 GiB Core: 171 devices, 28 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@30880000 Out: serial@30880000 Err: serial@30880000 Model: Toradex Verdin iMX8M Plus WB on Verdin Development Board SEC0: RNG instantiated Setting variant to nonwifi Net: Error: ethernet@30bf0000 No valid MAC address found. Can't find FEC0 clk rate: -22 Error: ethernet@30bf0000 No valid MAC address found. Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for mdio: addr 7 Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for FEC1: addr 7 Error: ethernet@30bf0000 No valid MAC address found. Can't find FEC0 clk rate: -22 Error: ethernet@30bf0000 No valid MAC address found. Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for mdio: addr 7 Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Read MDIO failed... Could not get PHY for FEC1: addr 7 Error: ethernet@30bf0000 No valid MAC address found. Error: ethernet@30bf0000 No valid MAC address found. No ethernet found. Hit any key to stop autoboot: 0 ```

2 1

[GIT PULL] Please pull u-boot-dfu-20240215
by Mattijs Korpershoek 15 Feb '24

15 Feb '24

Hi Tom, Here are some developments for master including: - Fix avb_verify command with SD cards - Add u-boot-dfu maintainer tree for AB/AVB - Avb: report verified boot state based on lock state - Misc avb refactors improve code quality The CI job is at https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/19653 Thanks, Mattijs The following changes since commit 37345abb97ef0dd9c50a03b2a72617612dcae585: Prepare v2024.04-rc2 (2024-02-13 18:16:57 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-dfu.git tags/u-boot-dfu-20240215 for you to fetch changes up to e2f6270f2da844d598555702d3af4f2e3fae3f9f: doc: android: avb: sync usage details (2024-02-15 10:38:34 +0100) ---------------------------------------------------------------- u-boot-dfu-20240215 - Fix avb_verify command with SD cards - Add u-boot-dfu maintainer tree for AB/AVB - Avb: report verified boot state based on lock state - Misc avb refactors improve code quality ---------------------------------------------------------------- Igor Opaniuk (8): MAINTAINERS: add custodian tree info for AVB/AB common: avb_verify: don't call mmc_switch_part for SD avb: move SPDX license identifiers to the first line common: avb_verify: rework error/debug prints cmd: avb: rework prints common: avb_verify: add str_avb_io_error/str_avb_slot_error cmd: avb: rework do_avb_verify_part doc: android: avb: sync usage details MAINTAINERS | 2 + cmd/avb.c | 173 +++++++++++++++++---------------- common/avb_verify.c | 89 +++++++++++++---- doc/android/avb2.rst | 16 ++- include/avb_verify.h | 7 +- test/py/tests/test_android/test_avb.py | 3 +- 6 files changed, 180 insertions(+), 110 deletions(-)

2 1

[PATCH v2 1/3] mtd: spi-nor-ids: Add support for ESMT/EON EN25Q80B
by Frieder Schrempf 15 Feb '24

15 Feb '24

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> The datasheet can be found here: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/EN25Q80B_Ver.E.pdf Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> Reviewed-by: Fabio Estevam <festevam(a)gmail.com> --- Changes in v2: * Add R-b tag from Fabio (Thanks!) --- drivers/mtd/spi/spi-nor-ids.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 38a287487ed..4e83b8c94c9 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -80,6 +80,7 @@ const struct flash_info spi_nor_ids[] = { #endif #ifdef CONFIG_SPI_FLASH_EON /* EON */ /* EON -- en25xxx */ + { INFO("en25q80b", 0x1c3014, 0, 64 * 1024, 16, SECT_4K) }, { INFO("en25q32b", 0x1c3016, 0, 64 * 1024, 64, 0) }, { INFO("en25q64", 0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, { INFO("en25q128b", 0x1c3018, 0, 64 * 1024, 256, 0) }, -- 2.43.0

3 6

ACPI Vendor ID Request
by Heinrich Schuchardt 15 Feb '24

15 Feb '24

Hello Tom, as we have started to generate ACPI tables in U-Boot we should request an ACPI vendor ID for the U-Boot project. As described in https://uefi.org/PNP_ACPI_Registry this is done by sending a mail to vid-request(a)uefi.org. As the ID is meant to have 4 letters I suggest to use 'UBOO'. https://uefi.org/ACPI_ID_List shows existing IDs. I don't know if the owner must be a legal company (which probably needs to be member of the UEFI forum) or we simply can have "Das U-Boot project" as owner. Best regards Heinrich

2 2

[GIT PULL] xilinx patches for v2024.04-rc3
by Michal Simek 15 Feb '24

15 Feb '24

Hi Tom, please pull these patches to your branch. Most of them are related to device tree and aligning with the latest dt schema for SR certification. CI is not reporting any issue too. Thanks, Michal The following changes since commit e8f2404e093daf6cc3ac2b3233e3c6770d13e371: Merge branch 'master-779h0-r2' of https://source.denx.de/u-boot/custodians/u-boot-sh (2024-02-11 12:42:25 -0500) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-microblaze.git tags/xilinx-for-v2024.04-rc3 for you to fetch changes up to c2ad5fb616d4e8aa2ac00e224030589847731fbe: arm64: versal-net: Setup correct addresses of GICR/GICD (2024-02-14 11:23:43 +0100) ---------------------------------------------------------------- Xilinx changes for v2024.04-rc3 zynqmp: - Cover missing _SE chip variants to fix fpga programming versal: - Enable LTO for mini configurations versal-net: - Enable LTO for mini configurations - Fix GIC address to aligned with real silicon xilinx: - DTs cleanup and fixups - Enable HTTP boot - Add missing spl header to zynqmp.c ---------------------------------------------------------------- Michal Simek (10): arm64: xilinx: Enable EFI_HTTP_BOOT by default arm64: zynqmp: Sync clock labels with kr260 revB arm64: zynqmp: Describe 25MHz fixed clock for PL GEMs arm64: zynqmp: Fix kr260 clock wiring xilinx: Fix fpga region DT nodes name arm64: zynqmp: Remove arm,cortex-a53-edac node arm64: zynqmp: Align nvmem-fw node with dt-schema arm64: zynqmp: Do not expose usbhub nodes on kr260 usb1 arm64: zynqmp: Disable DP on kd240 arm64: versal-net: Setup correct addresses of GICR/GICD Saeed Nowshadi (1): arm64: zynqmp: Add 'silabs, skip-recall' to all si570 clk nodes Venkatesh Yadav Abbarapu (4): soc: zynqmp: Add the IDcode for dr_SE and eg_SE variants configs: versal: Enable CONFIG_LTO for mini qspi/ospi configs: versal_net: Enable CONFIG_LTO for mini qspi/ospi xilinx: zynqmp: Add the missing function prototype arch/arm/dts/zynq-7000.dtsi | 2 +- arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 5 + arch/arm/dts/zynqmp-sck-kd-g-revA.dtso | 16 +++ arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 25 ++-- arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 8 ++ arch/arm/dts/zynqmp.dtsi | 131 ++++++++++---------- board/xilinx/zynqmp/zynqmp.c | 1 + configs/xilinx_versal_mini_ospi_defconfig | 1 + configs/xilinx_versal_mini_qspi_defconfig | 1 + configs/xilinx_versal_net_mini_ospi_defconfig | 1 + configs/xilinx_versal_net_mini_qspi_defconfig | 1 + configs/xilinx_versal_net_virt_defconfig | 1 + configs/xilinx_versal_virt_defconfig | 1 + configs/xilinx_zynqmp_kria_defconfig | 1 + configs/xilinx_zynqmp_virt_defconfig | 1 + drivers/soc/soc_xilinx_zynqmp.c | 28 ++++- include/configs/xilinx_versal_net.h | 4 +- 17 files changed, 149 insertions(+), 79 deletions(-) -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs

2 1