October 2024 - U-Boot

[PATCH v2 1/2] ARM: dts: Drop unused RZ/G2L devicetrees
by Paul Barker 30 Oct '24

30 Oct '24

We are now using the dts/upstream subtree for the RZ/G2L SoC family so we can drop unused devicetree files from arch/arm/dts. Signed-off-by: Paul Barker <paul.barker.ct(a)bp.renesas.com> --- Changes v1->v2: - Improve commit message arch/arm/dts/Makefile | 3 - arch/arm/dts/r9a07g044.dtsi | 1273 --------------------- arch/arm/dts/r9a07g044l2-smarc.dts | 39 - arch/arm/dts/r9a07g044l2.dtsi | 13 - arch/arm/dts/rz-smarc-common.dtsi | 183 --- arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 157 --- arch/arm/dts/rzg2l-smarc-som.dtsi | 371 ------ arch/arm/dts/rzg2l-smarc.dtsi | 181 --- 8 files changed, 2220 deletions(-) delete mode 100644 arch/arm/dts/r9a07g044.dtsi delete mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts delete mode 100644 arch/arm/dts/r9a07g044l2.dtsi delete mode 100644 arch/arm/dts/rz-smarc-common.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index aeccfa93fc53..e0cc9937acb4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -979,9 +979,6 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \ imxrt1170-evk.dtb \ -dtb-$(CONFIG_TARGET_RZG2L) += \ - r9a07g044l2-smarc.dts - ifdef CONFIG_RCAR_64 DTC_FLAGS += -R 4 -p 0x1000 endif diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi deleted file mode 100644 index 66f68fc2b241..000000000000 --- a/arch/arm/dts/r9a07g044.dtsi +++ /dev/null @@ -1,1273 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/r9a07g044-cpg.h> - -/ { - compatible = "renesas,r9a07g044"; - #address-cells = <2>; - #size-cells = <2>; - - audio_clk1: audio1-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - audio_clk2: audio2-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board */ - clock-frequency = <0>; - }; - - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - }; - }; - - cpu0: cpu@0 { - compatible = "arm,cortex-a55"; - reg = <0>; - device_type = "cpu"; - #cooling-cells = <2>; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu1: cpu@100 { - compatible = "arm,cortex-a55"; - reg = <0x100>; - device_type = "cpu"; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - L3_CA55: cache-controller-0 { - compatible = "cache"; - cache-unified; - cache-size = <0x40000>; - cache-level = <3>; - }; - }; - - gpu_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000>; - }; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1100000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <1100000>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1100000>; - }; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <1100000>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <1100000>; - }; - - opp-62500000 { - opp-hz = /bits/ 64 <62500000>; - opp-microvolt = <1100000>; - }; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <1100000>; - }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; - }; - - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - - soc: soc { - compatible = "simple-bus"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mtu3: timer@10001200 { - compatible = "renesas,r9a07g044-mtu3", - "renesas,rz-mtu3"; - reg = <0 0x10001200 0 0xb00>; - interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", - "tciv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tciv1", "tciu1", - "tgia2", "tgib2", "tciv2", "tciu2", - "tgia3", "tgib3", "tgic3", "tgid3", - "tciv3", - "tgia4", "tgib4", "tgic4", "tgid4", - "tciv4", - "tgiu5", "tgiv5", "tgiw5", - "tgia6", "tgib6", "tgic6", "tgid6", - "tciv6", - "tgia7", "tgib7", "tgic7", "tgid7", - "tciv7", - "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; - clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; - #pwm-cells = <2>; - status = "disabled"; - }; - - ssi0: ssi@10049c00 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x10049c00 0 0x400>; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; - dmas = <&dmac 0x2655>, <&dmac 0x2656>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi1: ssi@1004a000 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a000 0 0x400>; - interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; - dmas = <&dmac 0x2659>, <&dmac 0x265a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi2: ssi@1004a400 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a400 0 0x400>; - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rt"; - clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; - dmas = <&dmac 0x265f>; - dma-names = "rt"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi3: ssi@1004a800 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a800 0 0x400>; - interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; - dmas = <&dmac 0x2661>, <&dmac 0x2662>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - spi0: spi@1004ac00 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004ac00 0 0x400>; - interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; - resets = <&cpg R9A07G044_RSPI0_RST>; - dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@1004b000 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b000 0 0x400>; - interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; - resets = <&cpg R9A07G044_RSPI1_RST>; - dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@1004b400 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b400 0 0x400>; - interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; - resets = <&cpg R9A07G044_RSPI2_RST>; - dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - scif0: serial@1004b800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004b800 0 0x400>; - interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif1: serial@1004bc00 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004bc00 0 0x400>; - interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif2: serial@1004c000 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c000 0 0x400>; - interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif3: serial@1004c400 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c400 0 0x400>; - interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif4: serial@1004c800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c800 0 0x400>; - interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>; - status = "disabled"; - }; - - sci0: serial@1004d000 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d000 0 0x400>; - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI0_RST>; - status = "disabled"; - }; - - sci1: serial@1004d400 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d400 0 0x400>; - interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI1_RST>; - status = "disabled"; - }; - - canfd: can@10050000 { - compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; - reg = <0 0x10050000 0 0x8000>; - interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g_err", "g_recc", - "ch0_err", "ch0_rec", "ch0_trx", - "ch1_err", "ch1_rec", "ch1_trx"; - clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, - <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; - assigned-clock-rates = <50000000>; - resets = <&cpg R9A07G044_CANFD_RSTP_N>, - <&cpg R9A07G044_CANFD_RSTC_N>; - reset-names = "rstp_n", "rstc_n"; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - channel1 { - status = "disabled"; - }; - }; - - i2c0: i2c@10058000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058000 0 0x400>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C0_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c1: i2c@10058400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058400 0 0x400>; - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C1_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c2: i2c@10058800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058800 0 0x400>; - interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C2_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c3: i2c@10058c00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058c00 0 0x400>; - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C3_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - adc: adc@10059000 { - compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; - reg = <0 0x10059000 0 0x400>; - interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, - <&cpg CPG_MOD R9A07G044_ADC_PCLK>; - clock-names = "adclk", "pclk"; - resets = <&cpg R9A07G044_ADC_PRESETN>, - <&cpg R9A07G044_ADC_ADRST_N>; - reset-names = "presetn", "adrst-n"; - power-domains = <&cpg>; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - }; - channel@1 { - reg = <1>; - }; - channel@2 { - reg = <2>; - }; - channel@3 { - reg = <3>; - }; - channel@4 { - reg = <4>; - }; - channel@5 { - reg = <5>; - }; - channel@6 { - reg = <6>; - }; - channel@7 { - reg = <7>; - }; - }; - - tsu: thermal@10059400 { - compatible = "renesas,r9a07g044-tsu", - "renesas,rzg2l-tsu"; - reg = <0 0x10059400 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; - resets = <&cpg R9A07G044_TSU_PRESETN>; - power-domains = <&cpg>; - #thermal-sensor-cells = <1>; - }; - - sbc: spi@10060000 { - compatible = "renesas,r9a07g044-rpc-if", - "renesas,rzg2l-rpc-if"; - reg = <0 0x10060000 0 0x10000>, - <0 0x20000000 0 0x10000000>, - <0 0x10070000 0 0x10000>; - reg-names = "regs", "dirmap", "wbuf"; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, - <&cpg CPG_MOD R9A07G044_SPI_CLK>; - resets = <&cpg R9A07G044_SPI_RST>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - cru: video@10830000 { - compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; - reg = <0 0x10830000 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>, - <&cpg CPG_MOD R9A07G044_CRU_ACLK>; - clock-names = "video", "apb", "axi"; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_ARESETN>; - reset-names = "presetn", "aresetn"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <0>; - cruparallel: endpoint@0 { - reg = <0>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - crucsi2: endpoint@0 { - reg = <0>; - remote-endpoint = <&csi2cru>; - }; - }; - }; - }; - - csi2: csi2@10830400 { - compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; - reg = <0 0x10830400 0 0xfc00>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, - <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>; - clock-names = "system", "video", "apb"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_CMN_RSTB>; - reset-names = "presetn", "cmn-rstb"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - csi2cru: endpoint@0 { - reg = <0>; - remote-endpoint = <&crucsi2>; - }; - }; - }; - }; - - dsi: dsi@10850000 { - compatible = "renesas,r9a07g044-mipi-dsi", - "renesas,rzg2l-mipi-dsi"; - reg = <0 0x10850000 0 0x20000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "seq0", "seq1", "vin1", "rcv", - "ferr", "ppi", "debug"; - clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; - clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; - resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, - <&cpg R9A07G044_MIPI_DSI_ARESET_N>, - <&cpg R9A07G044_MIPI_DSI_PRESET_N>; - reset-names = "rst", "arst", "prst"; - power-domains = <&cpg>; - status = "disabled"; - }; - - vspd: vsp@10870000 { - compatible = "renesas,r9a07g044-vsp2"; - reg = <0 0x10870000 0 0x10000>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - renesas,fcp = <&fcpvd>; - }; - - fcpvd: fcp@10880000 { - compatible = "renesas,r9a07g044-fcpvd", - "renesas,fcpv"; - reg = <0 0x10880000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - }; - - cpg: clock-controller@11010000 { - compatible = "renesas,r9a07g044-cpg"; - reg = <0 0x11010000 0 0x10000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #reset-cells = <1>; - #power-domain-cells = <0>; - }; - - sysc: system-controller@11020000 { - compatible = "renesas,r9a07g044-sysc"; - reg = <0 0x11020000 0 0x10000>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpm_int", "ca55stbydone_int", - "cm33stbyr_int", "ca55_deny"; - status = "disabled"; - }; - - pinctrl: pinctrl@11030000 { - compatible = "renesas,r9a07g044-pinctrl"; - reg = <0 0x11030000 0 0x10000>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupt-parent = <&irqc>; - interrupt-controller; - gpio-ranges = <&pinctrl 0 0 392>; - clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPIO_RSTN>, - <&cpg R9A07G044_GPIO_PORT_RESETN>, - <&cpg R9A07G044_GPIO_SPARE_RESETN>; - }; - - irqc: interrupt-controller@110a0000 { - compatible = "renesas,r9a07g044-irqc", - "renesas,rzg2l-irqc"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0x110a0000 0 0x10000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; - clock-names = "clk", "pclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_IA55_RESETN>; - }; - - dmac: dma-controller@11820000 { - compatible = "renesas,r9a07g044-dmac", - "renesas,rz-dmac"; - reg = <0 0x11820000 0 0x10000>, - <0 0x11830000 0 0x10000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15"; - clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, - <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; - clock-names = "main", "register"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_DMAC_ARESETN>, - <&cpg R9A07G044_DMAC_RST_ASYNC>; - reset-names = "arst", "rst_async"; - #dma-cells = <1>; - dma-channels = <16>; - }; - - gpu: gpu@11840000 { - compatible = "renesas,r9a07g044-mali", - "arm,mali-bifrost"; - reg = <0x0 0x11840000 0x0 0x10000>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu", "event"; - clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>; - clock-names = "gpu", "bus", "bus_ace"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPU_RESETN>, - <&cpg R9A07G044_GPU_AXI_RESETN>, - <&cpg R9A07G044_GPU_ACE_RESETN>; - reset-names = "rst", "axi_rst", "ace_rst"; - operating-points-v2 = <&gpu_opp_table>; - }; - - gic: interrupt-controller@11900000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; - }; - - sdhi0: mmc@11c00000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c00000 0 0x10000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI0_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - sdhi1: mmc@11c10000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c10000 0 0x10000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI1_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - eth0: ethernet@11c20000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c20000 0 0x10000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH0_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - eth1: ethernet@11c30000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c30000 0 0x10000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH1_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - phyrst: usbphy-ctrl@11c40000 { - compatible = "renesas,r9a07g044-usbphy-ctrl", - "renesas,rzg2l-usbphy-ctrl"; - reg = <0 0x11c40000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; - resets = <&cpg R9A07G044_USB_PRESETN>; - power-domains = <&cpg>; - #reset-cells = <1>; - status = "disabled"; - }; - - ohci0: usb@11c50000 { - compatible = "generic-ohci"; - reg = <0 0x11c50000 0 0x100>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ohci1: usb@11c70000 { - compatible = "generic-ohci"; - reg = <0 0x11c70000 0 0x100>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci0: usb@11c50100 { - compatible = "generic-ehci"; - reg = <0 0x11c50100 0 0x100>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 2>; - phy-names = "usb"; - companion = <&ohci0>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci1: usb@11c70100 { - compatible = "generic-ehci"; - reg = <0 0x11c70100 0 0x100>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 2>; - phy-names = "usb"; - companion = <&ohci1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy0: usb-phy@11c50200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c50200 0 0x700>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy1: usb-phy@11c70200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c70200 0 0x700>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - hsusb: usb@11c60000 { - compatible = "renesas,usbhs-r9a07g044", - "renesas,rza2-usbhs"; - reg = <0 0x11c60000 0 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; - renesas,buswait = <7>; - phys = <&usb2_phy0 3>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt0: watchdog@12800800 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800800 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT0_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT0_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt1: watchdog@12800c00 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800C00 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT1_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT1_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm0: timer@12801000 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801000 0x0 0x400>; - interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>; - resets = <&cpg R9A07G044_OSTM0_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm1: timer@12801400 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801400 0x0 0x400>; - interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>; - resets = <&cpg R9A07G044_OSTM1_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm2: timer@12801800 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801800 0x0 0x400>; - interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>; - resets = <&cpg R9A07G044_OSTM2_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsu 0>; - sustainable-power = <717>; - - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&cpu0 0 2>; - contribution = <1024>; - }; - }; - - trips { - sensor_crit: sensor-crit { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; - }; - - target: trip-point { - temperature = <100000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; -}; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts deleted file mode 100644 index 568d49cfe44a..000000000000 --- a/arch/arm/dts/r9a07g044l2-smarc.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L SMARC EVK board - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; - -/* Enable SCIF2 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - -/* - * To enable MTU3a PWM on PMOD0, - * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and - * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below. - */ -#define PMOD_MTU3 0 - -#if (PMOD_MTU3 && PMOD1_SER0) -#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive " -#endif - -#define MTU3_COUNTER_Z_PHASE_SIGNAL 0 - -#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL) -#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0" -#endif - -#include "r9a07g044l2.dtsi" -#include "rzg2l-smarc-som.dtsi" -#include "rzg2l-smarc-pinfunction.dtsi" -#include "rz-smarc-common.dtsi" -#include "rzg2l-smarc.dtsi" - -/ { - model = "Renesas SMARC EVK based on r9a07g044l2"; - compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi deleted file mode 100644 index 91dc10b2cdbb..000000000000 --- a/arch/arm/dts/r9a07g044l2.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r9a07g044.dtsi" - -/ { - compatible = "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi deleted file mode 100644 index b7a3e6caa386..000000000000 --- a/arch/arm/dts/rz-smarc-common.dtsi +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts - * - * Copyright (C) 2022 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - -/ { - aliases { - serial0 = &scif0; - i2c0 = &i2c0; - i2c1 = &i2c1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - }; - - codec_dai: simple-audio-card,codec { - clocks = <&versa3 2>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - x1: x1-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; -}; - -&audio_clk1 { - clock-frequency = <11289600>; -}; - -&audio_clk2 { - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi deleted file mode 100644 index 18c526c7a4cf..000000000000 --- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb-hog { - gpio-hog; - gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb-hog { - gpio-hog; - gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ - <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ - }; - - mtu3_pins: mtu3 { - mtu3-ext-clk-input-pin { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */ - <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */ - }; - - mtu3-pwm { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */ - <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */ - <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */ - <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */ - }; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL - mtu3-zphase-clk { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */ - }; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - }; - - scif0_pins: scif0 { - pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ - <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ - <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ - <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ - <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ - <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ - <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ - <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ - <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ - <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ - }; -}; - diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi deleted file mode 100644 index 547859c388ce..000000000000 --- a/arch/arm/dts/rzg2l-smarc-som.dtsi +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ -#define EMMC 1 - -/* - * To enable uSD card on CN3, - * SW1[2] should be at position 3/ON. - * Disable eMMC by setting "#define EMMC 0" above. - */ -#define SDHI (!EMMC) - -/ { - aliases { - ethernet0 = &eth0; - ethernet1 = &eth1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p1v: regulator-vdd-core { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - states = <3300000 1>, <1800000 0>; - regulator-boot-on; - gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; - regulator-always-on; - }; - - /* 32.768kHz crystal */ - x2: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; -}; - -&adc { - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - status = "okay"; - - /delete-node/ channel@6; - /delete-node/ channel@7; -}; - -&eth0 { - pinctrl-0 = <&eth0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy0: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -&eth1 { - pinctrl-0 = <&eth1_pins>; - pinctrl-names = "default"; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy1: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -&extal_clk { - clock-frequency = <24000000>; -}; - -&gpu { - mali-supply = <&reg_1p1v>; -}; - -&i2c3 { - raa215300: pmic@12 { - compatible = "renesas,raa215300"; - reg = <0x12>, <0x6f>; - reg-names = "main", "rtc"; - - clocks = <&x2>; - clock-names = "xin"; - }; -}; - -&ostm1 { - status = "okay"; -}; - -&ostm2 { - status = "okay"; -}; - -&pinctrl { - adc_pins: adc { - pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */ - }; - - eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ - }; - - eth1_pins: eth1 { - pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */ - <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */ - <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */ - <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */ - <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */ - <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */ - <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */ - <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */ - <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */ - <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */ - <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */ - <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ - <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ - <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */ - <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ - }; - - gpio-sd0-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "gpio_sd0_pwr_en"; - }; - - qspi0_pins: qspi0 { - qspi0-data { - pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; - power-source = <1800>; - }; - - qspi0-ctrl { - pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; - power-source = <1800>; - }; - }; - - /* - * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] - * The below switch logic can be used to select the device between - * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. - * SW1[2] should be at position 2/OFF to enable 64 GB eMMC - * SW1[2] should be at position 3/ON to enable uSD card CN3 - */ - sd0-dev-sel-hog { - gpio-hog; - gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd0_dev_sel"; - }; - - sdhi0_emmc_pins: sd0emmc { - sd0_emmc_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", - "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; - power-source = <1800>; - }; - - sd0_emmc_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_emmc_rst { - pins = "SD0_RST#"; - power-source = <1800>; - }; - }; - - sdhi0_pins: sd0 { - sd0_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <3300>; - }; - - sd0_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <3300>; - }; - - sd0_mux { - pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ - }; - }; - - sdhi0_pins_uhs: sd0_uhs { - sd0_data_uhs { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <1800>; - }; - - sd0_ctrl_uhs { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ - }; - }; -}; - -&sbc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,mt25qu512a", "jedec,spi-nor"; - reg = <0>; - m25p,fast-read; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x00000000 0x2000000>; - read-only; - }; - user@2000000 { - reg = <0x2000000 0x2000000>; - }; - }; - }; -}; - -#if SDHI -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&vccq_sdhi0>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; -#endif - -#if EMMC -&sdhi0 { - pinctrl-0 = <&sdhi0_emmc_pins>; - pinctrl-1 = <&sdhi0_emmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&reg_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - fixed-emmc-driver-type = <1>; - status = "okay"; -}; -#endif - -&wdt0 { - status = "okay"; - timeout-sec = <60>; -}; - -&wdt1 { - status = "okay"; - timeout-sec = <60>; -}; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi deleted file mode 100644 index 37807f1bda4d..000000000000 --- a/arch/arm/dts/rzg2l-smarc.dtsi +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/ { - aliases { - serial1 = &scif2; - i2c3 = &i2c3; - }; - - osc1: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "d"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7535_out>; - }; - }; - }; -}; - -&cpu_dai { - sound-dai = <&ssi0>; -}; - -&dsi { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&adv7535_in>; - }; - }; - }; -}; - -&i2c1 { - adv7535: hdmi@3d { - compatible = "adi,adv7535"; - reg = <0x3d>; - - interrupt-parent = <&pinctrl>; - interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>; - clocks = <&osc1>; - clock-names = "cec"; - avdd-supply = <&reg_1p8v>; - dvdd-supply = <&reg_1p8v>; - pvdd-supply = <&reg_1p8v>; - a2vdd-supply = <&reg_1p8v>; - v3p3-supply = <&reg_3p3v>; - v1p2-supply = <&reg_1p8v>; - - adi,dsi-lanes = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7535_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7535_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; - - versa3: clock-generator@68 { - compatible = "renesas,5p35023"; - reg = <0x68>; - #clock-cells = <1>; - clocks = <&x1>; - - renesas,settings = [ - 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf - 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 - 80 b0 45 c4 95 - ]; - - assigned-clocks = <&versa3 0>, <&versa3 1>, - <&versa3 2>, <&versa3 3>, - <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <24000000>, <11289600>, - <11289600>, <12000000>, - <25000000>, <12288000>; - }; -}; - -#if PMOD_MTU3 -&mtu3 { - pinctrl-0 = <&mtu3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL -/* SDHI cd pin is muxed with counter Z phase signal */ -&sdhi1 { - status = "disabled"; -}; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - -&spi1 { - status = "disabled"; -}; -#endif /* PMOD_MTU3 */ - -/* - * To enable SCIF2 (SER0) on PMOD1 (CN7) - * SW1 should be at position 2->3 so that SER0_CTS# line is activated - * SW2 should be at position 2->3 so that SER0_TX line is activated - * SW3 should be at position 2->3 so that SER0_RX line is activated - * SW4 should be at position 2->3 so that SER0_RTS# line is activated - */ -#if PMOD1_SER0 -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; -#endif - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&vccq_sdhi1 { - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; -}; -- 2.43.0

2 3

env: ENV_WRITEABLE_LIST with ".flags" variable
by Zixun LI 30 Oct '24

30 Oct '24

Hello, I read the code about environment variable protection and an old discussion: https://lists.denx.de/pipermail/u-boot/2021-April/446247.html but I still have a question. In env_flags_init() we have: if (first_call) { #ifdef CONFIG_ENV_WRITEABLE_LIST flags_list = ENV_FLAGS_LIST_STATIC; #else flags_list = env_get(ENV_FLAGS_VAR); #endif first_call = 0; } When ENV_WRITEABLE_LIST is enabled, why do we have to initialize the list with ENV_FLAGS_LIST_STATIC instead of ".flags" ? Doing so makes ".flags" being ignored. In env_flags_lookup() there is already a fallback when a flag is not found, the static list will be checked. Since default env is firstly loaded in env_load(), external ".flags" are rejected and don't affect the security: change_ok() rejected setting variable .flags, skipping it! Advantage of using .flags is being able to use a <board>.env file to group all variables together without modifying the included header. Best regards, Zixun

1 0

[PATCH v8 0/8] efi: Add a test for EFI bootmeth
by Simon Glass 30 Oct '24

30 Oct '24

The test coverage for the EFI bootmeth is incomplete since it does not actually boot the application. This series creates a simple test for this purpose. It includes a few patches to make this work: - Revert of an unreviewed patch to change the sandbox efi filename - Hang in sandbox virtio due to EFI probing all block devices Other necessary fixes have already been applied. Changes in v8: - Add new patch to move default filename to a function - Add new patch to control on-host behaviour - Add new patch to report host default-filename in native mode Changes in v7: - Update commit message - Drop patches already applied - Drop patch 'Disable ANSI output for tests' - Rebase on -master Changes in v6: - Drop the patch to disable sandbox virtio blk with EFI - Add new patch to disable the sandbox virtio blk device - Deal with sandbox CONFIG_LOGF_FUNC - Rebase on -next - Drop patches previously applied - Drop mention of helloworld since it is no-longer used by this test Changes in v4: - Add efi_loader tag to some patches - Split out non-EFI patches into a different series Changes in v2: - Add many new patches to resolve all the outstanding test issues Simon Glass (8): test: boot: Update bootflow_iter() for console checking efi_loader: Add a test app efi: Move default filename to a function sandbox: Add a -N flag to control on-host behaviour sandbox: Report host default-filename in native mode sandbox: virtio: Disable the sandbox virtio blk device test: efi: boot: Set up an image suitable for EFI testing test: efi: boot: Add a test for the efi bootmeth arch/Kconfig | 3 +- arch/sandbox/cpu/start.c | 10 ++++ arch/sandbox/dts/test.dts | 2 +- arch/sandbox/include/asm/state.h | 1 + boot/Makefile | 4 +- boot/bootmeth_efi.c | 29 ++-------- boot/efi_fname.c | 82 ++++++++++++++++++++++++++++ cmd/efidebug.c | 25 +++++++++ include/efi.h | 34 ++++++++++++ include/efi_default_filename.h | 56 ------------------- lib/efi_loader/Kconfig | 10 ++++ lib/efi_loader/Makefile | 1 + lib/efi_loader/efi_bootmgr.c | 10 +++- lib/efi_loader/testapp.c | 68 +++++++++++++++++++++++ test/boot/bootdev.c | 18 +++++- test/boot/bootflow.c | 71 ++++++++++++++++++++++-- test/py/tests/bootstd/flash1.img.xz | Bin 0 -> 5016 bytes test/py/tests/test_ut.py | 52 ++++++++++++++++-- 18 files changed, 377 insertions(+), 99 deletions(-) create mode 100644 boot/efi_fname.c delete mode 100644 include/efi_default_filename.h create mode 100644 lib/efi_loader/testapp.c create mode 100644 test/py/tests/bootstd/flash1.img.xz -- 2.43.0

4 38

[PATCH 1/2] ARM: dts: Drop unused RZ/G2L devicetrees
by Paul Barker 30 Oct '24

30 Oct '24

We are now using the dts/upstream subtree for the RZ/G2L SoC family. Signed-off-by: Paul Barker <paul.barker.ct(a)bp.renesas.com> --- arch/arm/dts/Makefile | 3 - arch/arm/dts/r9a07g044.dtsi | 1273 --------------------- arch/arm/dts/r9a07g044l2-smarc.dts | 39 - arch/arm/dts/r9a07g044l2.dtsi | 13 - arch/arm/dts/rz-smarc-common.dtsi | 183 --- arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 157 --- arch/arm/dts/rzg2l-smarc-som.dtsi | 371 ------ arch/arm/dts/rzg2l-smarc.dtsi | 181 --- 8 files changed, 2220 deletions(-) delete mode 100644 arch/arm/dts/r9a07g044.dtsi delete mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts delete mode 100644 arch/arm/dts/r9a07g044l2.dtsi delete mode 100644 arch/arm/dts/rz-smarc-common.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi delete mode 100644 arch/arm/dts/rzg2l-smarc.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index aeccfa93fc53..e0cc9937acb4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -979,9 +979,6 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \ imxrt1170-evk.dtb \ -dtb-$(CONFIG_TARGET_RZG2L) += \ - r9a07g044l2-smarc.dts - ifdef CONFIG_RCAR_64 DTC_FLAGS += -R 4 -p 0x1000 endif diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi deleted file mode 100644 index 66f68fc2b241..000000000000 --- a/arch/arm/dts/r9a07g044.dtsi +++ /dev/null @@ -1,1273 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/r9a07g044-cpg.h> - -/ { - compatible = "renesas,r9a07g044"; - #address-cells = <2>; - #size-cells = <2>; - - audio_clk1: audio1-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - audio_clk2: audio2-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by boards that provide it */ - clock-frequency = <0>; - }; - - /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board */ - clock-frequency = <0>; - }; - - cluster0_opp: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1100000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - }; - }; - - cpu0: cpu@0 { - compatible = "arm,cortex-a55"; - reg = <0>; - device_type = "cpu"; - #cooling-cells = <2>; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu1: cpu@100 { - compatible = "arm,cortex-a55"; - reg = <0x100>; - device_type = "cpu"; - next-level-cache = <&L3_CA55>; - enable-method = "psci"; - clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; - operating-points-v2 = <&cluster0_opp>; - }; - - L3_CA55: cache-controller-0 { - compatible = "cache"; - cache-unified; - cache-size = <0x40000>; - cache-level = <3>; - }; - }; - - gpu_opp_table: opp-table-1 { - compatible = "operating-points-v2"; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000>; - }; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1100000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <1100000>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1100000>; - }; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <1100000>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <1100000>; - }; - - opp-62500000 { - opp-hz = /bits/ 64 <62500000>; - opp-microvolt = <1100000>; - }; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - opp-microvolt = <1100000>; - }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; - }; - - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; - }; - - soc: soc { - compatible = "simple-bus"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mtu3: timer@10001200 { - compatible = "renesas,r9a07g044-mtu3", - "renesas,rz-mtu3"; - reg = <0 0x10001200 0 0xb00>; - interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", - "tciv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tciv1", "tciu1", - "tgia2", "tgib2", "tciv2", "tciu2", - "tgia3", "tgib3", "tgic3", "tgid3", - "tciv3", - "tgia4", "tgib4", "tgic4", "tgid4", - "tciv4", - "tgiu5", "tgiv5", "tgiw5", - "tgia6", "tgib6", "tgic6", "tgid6", - "tciv6", - "tgia7", "tgib7", "tgic7", "tgid7", - "tciv7", - "tgia8", "tgib8", "tgic8", "tgid8", - "tciv8", "tciu8"; - clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; - #pwm-cells = <2>; - status = "disabled"; - }; - - ssi0: ssi@10049c00 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x10049c00 0 0x400>; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; - dmas = <&dmac 0x2655>, <&dmac 0x2656>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi1: ssi@1004a000 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a000 0 0x400>; - interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; - dmas = <&dmac 0x2659>, <&dmac 0x265a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi2: ssi@1004a400 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a400 0 0x400>; - interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rt"; - clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; - dmas = <&dmac 0x265f>; - dma-names = "rt"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - ssi3: ssi@1004a800 { - compatible = "renesas,r9a07g044-ssi", - "renesas,rz-ssi"; - reg = <0 0x1004a800 0 0x400>; - interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx"; - clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, - <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, - <&audio_clk1>, <&audio_clk2>; - clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; - resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; - dmas = <&dmac 0x2661>, <&dmac 0x2662>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - - spi0: spi@1004ac00 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004ac00 0 0x400>; - interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; - resets = <&cpg R9A07G044_RSPI0_RST>; - dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@1004b000 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b000 0 0x400>; - interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; - resets = <&cpg R9A07G044_RSPI1_RST>; - dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@1004b400 { - compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; - reg = <0 0x1004b400 0 0x400>; - interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "rx", "tx"; - clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; - resets = <&cpg R9A07G044_RSPI2_RST>; - dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; - dma-names = "tx", "rx"; - power-domains = <&cpg>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - scif0: serial@1004b800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004b800 0 0x400>; - interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif1: serial@1004bc00 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004bc00 0 0x400>; - interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif2: serial@1004c000 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c000 0 0x400>; - interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif3: serial@1004c400 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c400 0 0x400>; - interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>; - status = "disabled"; - }; - - scif4: serial@1004c800 { - compatible = "renesas,scif-r9a07g044"; - reg = <0 0x1004c800 0 0x400>; - interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", - "bri", "dri", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>; - status = "disabled"; - }; - - sci0: serial@1004d000 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d000 0 0x400>; - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI0_RST>; - status = "disabled"; - }; - - sci1: serial@1004d400 { - compatible = "renesas,r9a07g044-sci", "renesas,sci"; - reg = <0 0x1004d400 0 0x400>; - interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; - clock-names = "fck"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_SCI1_RST>; - status = "disabled"; - }; - - canfd: can@10050000 { - compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; - reg = <0 0x10050000 0 0x8000>; - interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "g_err", "g_recc", - "ch0_err", "ch0_rec", "ch0_trx", - "ch1_err", "ch1_rec", "ch1_trx"; - clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, - <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, - <&can_clk>; - clock-names = "fck", "canfd", "can_clk"; - assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; - assigned-clock-rates = <50000000>; - resets = <&cpg R9A07G044_CANFD_RSTP_N>, - <&cpg R9A07G044_CANFD_RSTC_N>; - reset-names = "rstp_n", "rstc_n"; - power-domains = <&cpg>; - status = "disabled"; - - channel0 { - status = "disabled"; - }; - channel1 { - status = "disabled"; - }; - }; - - i2c0: i2c@10058000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058000 0 0x400>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C0_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c1: i2c@10058400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058400 0 0x400>; - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C1_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c2: i2c@10058800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058800 0 0x400>; - interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C2_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - i2c3: i2c@10058c00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; - reg = <0 0x10058c00 0 0x400>; - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tei", "ri", "ti", "spi", "sti", - "naki", "ali", "tmoi"; - clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; - clock-frequency = <100000>; - resets = <&cpg R9A07G044_I2C3_MRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - adc: adc@10059000 { - compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; - reg = <0 0x10059000 0 0x400>; - interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, - <&cpg CPG_MOD R9A07G044_ADC_PCLK>; - clock-names = "adclk", "pclk"; - resets = <&cpg R9A07G044_ADC_PRESETN>, - <&cpg R9A07G044_ADC_ADRST_N>; - reset-names = "presetn", "adrst-n"; - power-domains = <&cpg>; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - }; - channel@1 { - reg = <1>; - }; - channel@2 { - reg = <2>; - }; - channel@3 { - reg = <3>; - }; - channel@4 { - reg = <4>; - }; - channel@5 { - reg = <5>; - }; - channel@6 { - reg = <6>; - }; - channel@7 { - reg = <7>; - }; - }; - - tsu: thermal@10059400 { - compatible = "renesas,r9a07g044-tsu", - "renesas,rzg2l-tsu"; - reg = <0 0x10059400 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; - resets = <&cpg R9A07G044_TSU_PRESETN>; - power-domains = <&cpg>; - #thermal-sensor-cells = <1>; - }; - - sbc: spi@10060000 { - compatible = "renesas,r9a07g044-rpc-if", - "renesas,rzg2l-rpc-if"; - reg = <0 0x10060000 0 0x10000>, - <0 0x20000000 0 0x10000000>, - <0 0x10070000 0 0x10000>; - reg-names = "regs", "dirmap", "wbuf"; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, - <&cpg CPG_MOD R9A07G044_SPI_CLK>; - resets = <&cpg R9A07G044_SPI_RST>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - cru: video@10830000 { - compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; - reg = <0 0x10830000 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>, - <&cpg CPG_MOD R9A07G044_CRU_ACLK>; - clock-names = "video", "apb", "axi"; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_ARESETN>; - reset-names = "presetn", "aresetn"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <0>; - cruparallel: endpoint@0 { - reg = <0>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - crucsi2: endpoint@0 { - reg = <0>; - remote-endpoint = <&csi2cru>; - }; - }; - }; - }; - - csi2: csi2@10830400 { - compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; - reg = <0 0x10830400 0 0xfc00>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, - <&cpg CPG_MOD R9A07G044_CRU_VCLK>, - <&cpg CPG_MOD R9A07G044_CRU_PCLK>; - clock-names = "system", "video", "apb"; - resets = <&cpg R9A07G044_CRU_PRESETN>, - <&cpg R9A07G044_CRU_CMN_RSTB>; - reset-names = "presetn", "cmn-rstb"; - power-domains = <&cpg>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - csi2cru: endpoint@0 { - reg = <0>; - remote-endpoint = <&crucsi2>; - }; - }; - }; - }; - - dsi: dsi@10850000 { - compatible = "renesas,r9a07g044-mipi-dsi", - "renesas,rzg2l-mipi-dsi"; - reg = <0 0x10850000 0 0x20000>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "seq0", "seq1", "vin1", "rcv", - "ferr", "ppi", "debug"; - clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, - <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; - clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; - resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, - <&cpg R9A07G044_MIPI_DSI_ARESET_N>, - <&cpg R9A07G044_MIPI_DSI_PRESET_N>; - reset-names = "rst", "arst", "prst"; - power-domains = <&cpg>; - status = "disabled"; - }; - - vspd: vsp@10870000 { - compatible = "renesas,r9a07g044-vsp2"; - reg = <0 0x10870000 0 0x10000>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - renesas,fcp = <&fcpvd>; - }; - - fcpvd: fcp@10880000 { - compatible = "renesas,r9a07g044-fcpvd", - "renesas,fcpv"; - reg = <0 0x10880000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, - <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; - clock-names = "aclk", "pclk", "vclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_LCDC_RESET_N>; - }; - - cpg: clock-controller@11010000 { - compatible = "renesas,r9a07g044-cpg"; - reg = <0 0x11010000 0 0x10000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #reset-cells = <1>; - #power-domain-cells = <0>; - }; - - sysc: system-controller@11020000 { - compatible = "renesas,r9a07g044-sysc"; - reg = <0 0x11020000 0 0x10000>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "lpm_int", "ca55stbydone_int", - "cm33stbyr_int", "ca55_deny"; - status = "disabled"; - }; - - pinctrl: pinctrl@11030000 { - compatible = "renesas,r9a07g044-pinctrl"; - reg = <0 0x11030000 0 0x10000>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupt-parent = <&irqc>; - interrupt-controller; - gpio-ranges = <&pinctrl 0 0 392>; - clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPIO_RSTN>, - <&cpg R9A07G044_GPIO_PORT_RESETN>, - <&cpg R9A07G044_GPIO_SPARE_RESETN>; - }; - - irqc: interrupt-controller@110a0000 { - compatible = "renesas,r9a07g044-irqc", - "renesas,rzg2l-irqc"; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0x110a0000 0 0x10000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; - clock-names = "clk", "pclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_IA55_RESETN>; - }; - - dmac: dma-controller@11820000 { - compatible = "renesas,r9a07g044-dmac", - "renesas,rz-dmac"; - reg = <0 0x11820000 0 0x10000>, - <0 0x11830000 0 0x10000>; - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14", "ch15"; - clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, - <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; - clock-names = "main", "register"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_DMAC_ARESETN>, - <&cpg R9A07G044_DMAC_RST_ASYNC>; - reset-names = "arst", "rst_async"; - #dma-cells = <1>; - dma-channels = <16>; - }; - - gpu: gpu@11840000 { - compatible = "renesas,r9a07g044-mali", - "arm,mali-bifrost"; - reg = <0x0 0x11840000 0x0 0x10000>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu", "event"; - clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>, - <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>; - clock-names = "gpu", "bus", "bus_ace"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_GPU_RESETN>, - <&cpg R9A07G044_GPU_AXI_RESETN>, - <&cpg R9A07G044_GPU_ACE_RESETN>; - reset-names = "rst", "axi_rst", "ace_rst"; - operating-points-v2 = <&gpu_opp_table>; - }; - - gic: interrupt-controller@11900000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x11900000 0 0x40000>, - <0x0 0x11940000 0 0x60000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; - }; - - sdhi0: mmc@11c00000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c00000 0 0x10000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI0_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - sdhi1: mmc@11c10000 { - compatible = "renesas,sdhi-r9a07g044", - "renesas,rcar-gen3-sdhi"; - reg = <0x0 0x11c10000 0 0x10000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, - <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, - <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, - <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; - clock-names = "core", "clkh", "cd", "aclk"; - resets = <&cpg R9A07G044_SDHI1_IXRST>; - power-domains = <&cpg>; - status = "disabled"; - }; - - eth0: ethernet@11c20000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c20000 0 0x10000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH0_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - eth1: ethernet@11c30000 { - compatible = "renesas,r9a07g044-gbeth", - "renesas,rzg2l-gbeth"; - reg = <0 0x11c30000 0 0x10000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mux", "fil", "arp_ns"; - phy-mode = "rgmii"; - clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, - <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, - <&cpg CPG_CORE R9A07G044_CLK_HP>; - clock-names = "axi", "chi", "refclk"; - resets = <&cpg R9A07G044_ETH1_RST_HW_N>; - power-domains = <&cpg>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - phyrst: usbphy-ctrl@11c40000 { - compatible = "renesas,r9a07g044-usbphy-ctrl", - "renesas,rzg2l-usbphy-ctrl"; - reg = <0 0x11c40000 0 0x10000>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; - resets = <&cpg R9A07G044_USB_PRESETN>; - power-domains = <&cpg>; - #reset-cells = <1>; - status = "disabled"; - }; - - ohci0: usb@11c50000 { - compatible = "generic-ohci"; - reg = <0 0x11c50000 0 0x100>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ohci1: usb@11c70000 { - compatible = "generic-ohci"; - reg = <0 0x11c70000 0 0x100>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 1>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci0: usb@11c50100 { - compatible = "generic-ehci"; - reg = <0 0x11c50100 0 0x100>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2H0_HRESETN>; - phys = <&usb2_phy0 2>; - phy-names = "usb"; - companion = <&ohci0>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ehci1: usb@11c70100 { - compatible = "generic-ehci"; - reg = <0 0x11c70100 0 0x100>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>, - <&cpg R9A07G044_USB_U2H1_HRESETN>; - phys = <&usb2_phy1 2>; - phy-names = "usb"; - companion = <&ohci1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy0: usb-phy@11c50200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c50200 0 0x700>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; - resets = <&phyrst 0>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - usb2_phy1: usb-phy@11c70200 { - compatible = "renesas,usb2-phy-r9a07g044", - "renesas,rzg2l-usb2-phy"; - reg = <0 0x11c70200 0 0x700>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; - resets = <&phyrst 1>; - #phy-cells = <1>; - power-domains = <&cpg>; - status = "disabled"; - }; - - hsusb: usb@11c60000 { - compatible = "renesas,usbhs-r9a07g044", - "renesas,rza2-usbhs"; - reg = <0 0x11c60000 0 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, - <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; - resets = <&phyrst 0>, - <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; - renesas,buswait = <7>; - phys = <&usb2_phy0 3>; - phy-names = "usb"; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt0: watchdog@12800800 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800800 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT0_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT0_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - wdt1: watchdog@12800c00 { - compatible = "renesas,r9a07g044-wdt", - "renesas,rzg2l-wdt"; - reg = <0 0x12800C00 0 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>, - <&cpg CPG_MOD R9A07G044_WDT1_CLK>; - clock-names = "pclk", "oscclk"; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "wdt", "perrout"; - resets = <&cpg R9A07G044_WDT1_PRESETN>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm0: timer@12801000 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801000 0x0 0x400>; - interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>; - resets = <&cpg R9A07G044_OSTM0_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm1: timer@12801400 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801400 0x0 0x400>; - interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>; - resets = <&cpg R9A07G044_OSTM1_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - - ostm2: timer@12801800 { - compatible = "renesas,r9a07g044-ostm", - "renesas,ostm"; - reg = <0x0 0x12801800 0x0 0x400>; - interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; - clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>; - resets = <&cpg R9A07G044_OSTM2_PRESETZ>; - power-domains = <&cpg>; - status = "disabled"; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsu 0>; - sustainable-power = <717>; - - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&cpu0 0 2>; - contribution = <1024>; - }; - }; - - trips { - sensor_crit: sensor-crit { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; - }; - - target: trip-point { - temperature = <100000>; - hysteresis = <1000>; - type = "passive"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; -}; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts deleted file mode 100644 index 568d49cfe44a..000000000000 --- a/arch/arm/dts/r9a07g044l2-smarc.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L SMARC EVK board - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; - -/* Enable SCIF2 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - -/* - * To enable MTU3a PWM on PMOD0, - * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and - * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below. - */ -#define PMOD_MTU3 0 - -#if (PMOD_MTU3 && PMOD1_SER0) -#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive " -#endif - -#define MTU3_COUNTER_Z_PHASE_SIGNAL 0 - -#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL) -#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0" -#endif - -#include "r9a07g044l2.dtsi" -#include "rzg2l-smarc-som.dtsi" -#include "rzg2l-smarc-pinfunction.dtsi" -#include "rz-smarc-common.dtsi" -#include "rzg2l-smarc.dtsi" - -/ { - model = "Renesas SMARC EVK based on r9a07g044l2"; - compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi deleted file mode 100644 index 91dc10b2cdbb..000000000000 --- a/arch/arm/dts/r9a07g044l2.dtsi +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r9a07g044.dtsi" - -/ { - compatible = "renesas,r9a07g044l2", "renesas,r9a07g044"; -}; diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi deleted file mode 100644 index b7a3e6caa386..000000000000 --- a/arch/arm/dts/rz-smarc-common.dtsi +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts - * - * Copyright (C) 2022 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/* - * SSI-WM8978 - * - * This command is required when Playback/Capture - * - * amixer cset name='Left Input Mixer L2 Switch' on - * amixer cset name='Right Input Mixer R2 Switch' on - * amixer cset name='Headphone Playback Volume' 100 - * amixer cset name='PCM Volume' 100% - * amixer cset name='Input PGA Volume' 25 - * - */ - -/ { - aliases { - serial0 = &scif0; - i2c0 = &i2c0; - i2c1 = &i2c1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - snd_rzg2l: sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&cpu_dai>; - simple-audio-card,frame-master = <&cpu_dai>; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,widgets = "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "L2", "Mic Bias", - "R2", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - cpu_dai: simple-audio-card,cpu { - }; - - codec_dai: simple-audio-card,codec { - clocks = <&versa3 2>; - sound-dai = <&wm8978>; - }; - }; - - usb0_vbus_otg: regulator-usb0-vbus-otg { - compatible = "regulator-fixed"; - - regulator-name = "USB0_VBUS_OTG"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - x1: x1-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; -}; - -&audio_clk1 { - clock-frequency = <11289600>; -}; - -&audio_clk2 { - clock-frequency = <12288000>; -}; - -&canfd { - pinctrl-0 = <&can0_pins &can1_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; - - channel1 { - status = "okay"; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&phyrst { - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&vccq_sdhi1>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&usb0_vbus_otg>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi deleted file mode 100644 index 18c526c7a4cf..000000000000 --- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -&pinctrl { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - can0_pins: can0 { - pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ - }; - - /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ - can0-stb-hog { - gpio-hog; - gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can0_stb"; - }; - - can1_pins: can1 { - pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ - <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ - }; - - /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ - can1-stb-hog { - gpio-hog; - gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; - output-low; - line-name = "can1_stb"; - }; - - i2c0_pins: i2c0 { - pins = "RIIC0_SDA", "RIIC0_SCL"; - input-enable; - }; - - i2c1_pins: i2c1 { - pins = "RIIC1_SDA", "RIIC1_SCL"; - input-enable; - }; - - i2c3_pins: i2c3 { - pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ - <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ - }; - - mtu3_pins: mtu3 { - mtu3-ext-clk-input-pin { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */ - <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */ - }; - - mtu3-pwm { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */ - <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */ - <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */ - <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */ - }; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL - mtu3-zphase-clk { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */ - }; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - }; - - scif0_pins: scif0 { - pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ - }; - - scif2_pins: scif2 { - pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */ - <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */ - <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */ - }; - - sd1-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd1_pwr_en"; - }; - - sdhi1_pins: sd1 { - sd1_data { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <3300>; - }; - - sd1_ctrl { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <3300>; - }; - - sd1_mux { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sdhi1_pins_uhs: sd1_uhs { - sd1_data_uhs { - pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; - power-source = <1800>; - }; - - sd1_ctrl_uhs { - pins = "SD1_CLK", "SD1_CMD"; - power-source = <1800>; - }; - - sd1_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ - }; - }; - - sound_clk_pins: sound_clk { - pins = "AUDIO_CLK1", "AUDIO_CLK2"; - input-enable; - }; - - spi1_pins: spi1 { - pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ - <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ - <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ - <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ - }; - - ssi0_pins: ssi0 { - pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ - <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ - <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ - <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ - }; - - usb0_pins: usb0 { - pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ - <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ - }; - - usb1_pins: usb1 { - pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ - <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ - }; -}; - diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi deleted file mode 100644 index 547859c388ce..000000000000 --- a/arch/arm/dts/rzg2l-smarc-som.dtsi +++ /dev/null @@ -1,371 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ -#define EMMC 1 - -/* - * To enable uSD card on CN3, - * SW1[2] should be at position 3/ON. - * Disable eMMC by setting "#define EMMC 0" above. - */ -#define SDHI (!EMMC) - -/ { - aliases { - ethernet0 = &eth0; - ethernet1 = &eth1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_1p1v: regulator-vdd-core { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - states = <3300000 1>, <1800000 0>; - regulator-boot-on; - gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; - regulator-always-on; - }; - - /* 32.768kHz crystal */ - x2: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; -}; - -&adc { - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - status = "okay"; - - /delete-node/ channel@6; - /delete-node/ channel@7; -}; - -&eth0 { - pinctrl-0 = <&eth0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy0: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -&eth1 { - pinctrl-0 = <&eth1_pins>; - pinctrl-names = "default"; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - status = "okay"; - - phy1: ethernet-phy@7 { - compatible = "ethernet-phy-id0022.1640", - "ethernet-phy-ieee802.3-c22"; - reg = <7>; - interrupt-parent = <&irqc>; - interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>; - rxc-skew-psec = <2400>; - txc-skew-psec = <2400>; - rxdv-skew-psec = <0>; - txen-skew-psec = <0>; - rxd0-skew-psec = <0>; - rxd1-skew-psec = <0>; - rxd2-skew-psec = <0>; - rxd3-skew-psec = <0>; - txd0-skew-psec = <0>; - txd1-skew-psec = <0>; - txd2-skew-psec = <0>; - txd3-skew-psec = <0>; - }; -}; - -&extal_clk { - clock-frequency = <24000000>; -}; - -&gpu { - mali-supply = <&reg_1p1v>; -}; - -&i2c3 { - raa215300: pmic@12 { - compatible = "renesas,raa215300"; - reg = <0x12>, <0x6f>; - reg-names = "main", "rtc"; - - clocks = <&x2>; - clock-names = "xin"; - }; -}; - -&ostm1 { - status = "okay"; -}; - -&ostm2 { - status = "okay"; -}; - -&pinctrl { - adc_pins: adc { - pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */ - }; - - eth0_pins: eth0 { - pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ - <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ - <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ - <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ - <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ - <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ - <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ - <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ - <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ - <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ - <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ - <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ - <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ - <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ - <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */ - <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */ - }; - - eth1_pins: eth1 { - pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */ - <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */ - <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */ - <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */ - <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */ - <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */ - <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */ - <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */ - <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */ - <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */ - <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */ - <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ - <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ - <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ - <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */ - <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */ - }; - - gpio-sd0-pwr-en-hog { - gpio-hog; - gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "gpio_sd0_pwr_en"; - }; - - qspi0_pins: qspi0 { - qspi0-data { - pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; - power-source = <1800>; - }; - - qspi0-ctrl { - pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; - power-source = <1800>; - }; - }; - - /* - * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] - * The below switch logic can be used to select the device between - * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. - * SW1[2] should be at position 2/OFF to enable 64 GB eMMC - * SW1[2] should be at position 3/ON to enable uSD card CN3 - */ - sd0-dev-sel-hog { - gpio-hog; - gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "sd0_dev_sel"; - }; - - sdhi0_emmc_pins: sd0emmc { - sd0_emmc_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", - "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; - power-source = <1800>; - }; - - sd0_emmc_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_emmc_rst { - pins = "SD0_RST#"; - power-source = <1800>; - }; - }; - - sdhi0_pins: sd0 { - sd0_data { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <3300>; - }; - - sd0_ctrl { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <3300>; - }; - - sd0_mux { - pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ - }; - }; - - sdhi0_pins_uhs: sd0_uhs { - sd0_data_uhs { - pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; - power-source = <1800>; - }; - - sd0_ctrl_uhs { - pins = "SD0_CLK", "SD0_CMD"; - power-source = <1800>; - }; - - sd0_mux_uhs { - pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ - }; - }; -}; - -&sbc { - pinctrl-0 = <&qspi0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,mt25qu512a", "jedec,spi-nor"; - reg = <0>; - m25p,fast-read; - spi-max-frequency = <50000000>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - boot@0 { - reg = <0x00000000 0x2000000>; - read-only; - }; - user@2000000 { - reg = <0x2000000 0x2000000>; - }; - }; - }; -}; - -#if SDHI -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&vccq_sdhi0>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; -#endif - -#if EMMC -&sdhi0 { - pinctrl-0 = <&sdhi0_emmc_pins>; - pinctrl-1 = <&sdhi0_emmc_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&reg_3p3v>; - vqmmc-supply = <&reg_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - fixed-emmc-driver-type = <1>; - status = "okay"; -}; -#endif - -&wdt0 { - status = "okay"; - timeout-sec = <60>; -}; - -&wdt1 { - status = "okay"; - timeout-sec = <60>; -}; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi deleted file mode 100644 index 37807f1bda4d..000000000000 --- a/arch/arm/dts/rzg2l-smarc.dtsi +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -/* - * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts - * - * Copyright (C) 2021 Renesas Electronics Corp. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> - -/ { - aliases { - serial1 = &scif2; - i2c3 = &i2c3; - }; - - osc1: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "d"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7535_out>; - }; - }; - }; -}; - -&cpu_dai { - sound-dai = <&ssi0>; -}; - -&dsi { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&adv7535_in>; - }; - }; - }; -}; - -&i2c1 { - adv7535: hdmi@3d { - compatible = "adi,adv7535"; - reg = <0x3d>; - - interrupt-parent = <&pinctrl>; - interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>; - clocks = <&osc1>; - clock-names = "cec"; - avdd-supply = <&reg_1p8v>; - dvdd-supply = <&reg_1p8v>; - pvdd-supply = <&reg_1p8v>; - a2vdd-supply = <&reg_1p8v>; - v3p3-supply = <&reg_3p3v>; - v1p2-supply = <&reg_1p8v>; - - adi,dsi-lanes = <4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7535_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7535_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; -}; - -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; - - versa3: clock-generator@68 { - compatible = "renesas,5p35023"; - reg = <0x68>; - #clock-cells = <1>; - clocks = <&x1>; - - renesas,settings = [ - 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf - 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 - 80 b0 45 c4 95 - ]; - - assigned-clocks = <&versa3 0>, <&versa3 1>, - <&versa3 2>, <&versa3 3>, - <&versa3 4>, <&versa3 5>; - assigned-clock-rates = <24000000>, <11289600>, - <11289600>, <12000000>, - <25000000>, <12288000>; - }; -}; - -#if PMOD_MTU3 -&mtu3 { - pinctrl-0 = <&mtu3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -#if MTU3_COUNTER_Z_PHASE_SIGNAL -/* SDHI cd pin is muxed with counter Z phase signal */ -&sdhi1 { - status = "disabled"; -}; -#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ - -&spi1 { - status = "disabled"; -}; -#endif /* PMOD_MTU3 */ - -/* - * To enable SCIF2 (SER0) on PMOD1 (CN7) - * SW1 should be at position 2->3 so that SER0_CTS# line is activated - * SW2 should be at position 2->3 so that SER0_TX line is activated - * SW3 should be at position 2->3 so that SER0_RX line is activated - * SW4 should be at position 2->3 so that SER0_RTS# line is activated - */ -#if PMOD1_SER0 -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; -#endif - -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&vccq_sdhi1 { - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; -}; -- 2.43.0

2 2

[PATCH] board: rzg2l: Update MAINTAINERS file to match dts/upstream paths
by Paul Barker 30 Oct '24

30 Oct '24

We are now using the dts/upstream subtree for the RZ/G2L SoC family, so update the board MAINTAINERS file to match rz-smarc dtsi files in this subtree. Signed-off-by: Paul Barker <paul.barker.ct(a)bp.renesas.com> --- board/renesas/rzg2l/MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/renesas/rzg2l/MAINTAINERS b/board/renesas/rzg2l/MAINTAINERS index 0a51391c1fc9..0e656e2ef4f0 100644 --- a/board/renesas/rzg2l/MAINTAINERS +++ b/board/renesas/rzg2l/MAINTAINERS @@ -1,6 +1,6 @@ RENESAS RZG2L BOARD FAMILY M: Paul Barker <paul.barker.ct(a)bp.renesas.com> S: Supported -F: arch/arm/dts/rz-smarc-common.dtsi +N: rz-smarc N: rzg2l N: r9a07g044 -- 2.43.0

2 1

[PATCH v2 0/5] Add OPP_LOW support for J7200
by Aniket Limaye 30 Oct '24

30 Oct '24

This series adds OPP_LOW spec data in k3_avs driver and enables a config option to select the OPP_LOW performance point. J7200 SOC supports OPP_LOW and OPP_NOM as two Operating Performance Points as per (7.5 Operating Performance Points) section in the Datasheet [0]. - A72SS/MSMC at 2 GHz/1GHz operation must use OPP_NOM. - A72SS/MSMC at 1 GHz/500 MHz operation can use OPP_NOM or OPP_LOW voltage (though OPP_LOW voltage is recommended to reduce power consumption). The actual OPP voltage for the device is read from the efuse and updated in k3_avs_probe(). The default j7200 devicetree and k3_avs driver set OPP_NOM spec frequency and voltage. In the board init file, if K3_OPP_LOW config is enabled, Check if OPP_LOW AVS voltage read from efuse is valid and update frequency (A72 and MSMC) and voltage (VDD_CPU) as per the OPP_LOW spec. [0]: https://www.ti.com/lit/gpn/dra821u (J7200 Datasheet) Test logs: https://gist.github.com/aniket-l/ec76679ebcb399cf10426bd7a4a154c3 With series applied on master plus below: - CONFIG_K3_OPP_LOW enabled in config - Additional helpful prints added in code - Logs shown with and without efuse register programmed for OPP_0 (Errors out if OPP_0 not found, programs OPP_LOW spec if found) --- v2: * Neha - Fix indentation - Updates to commit msgs - Re-format patches 3/5 and 4/5 with logical changes in each patch - Link to v1: https://lore.kernel.org/u-boot/20241017062911.2241167-1-a-limaye@ti.com/ Reid Tonking (5): arm: dts: k3-j7200-r5-common: Add msmc clk to a72 node misc: k3_avs: Add OPP_LOW voltage and frequency to vd_data misc: k3_avs: Check validity of efuse voltage data arm: mach-k3: j721e-init.c: J7200: Add support for CONFIG_K3_OPP_LOW configs: j7200_evm_r5_defconfig: Define K3_OPP_LOW .../arm/dts/k3-j7200-r5-common-proc-board.dts | 10 ++--- arch/arm/mach-k3/Kconfig | 6 +++ arch/arm/mach-k3/j721e/j721e_init.c | 45 ++++++++++++++++++- configs/j7200_evm_r5_defconfig | 1 + drivers/misc/k3_avs.c | 34 ++++++++++++++ include/k3-avs.h | 2 + 6 files changed, 92 insertions(+), 6 deletions(-) -- 2.34.1

2 10

[PATCH v1] acpi_table: Fix coverity defect in acpi_write_spcr
by Patrick Rudolph 30 Oct '24

30 Oct '24

Fix "Integer handling issues (SIGN_EXTENSION)" in newly added code: Cast serial_info.reg_offset to u64 to prevent an integer overflow when shifted too many bits to the left. Currently this never happens as the shift is supposed to be less than 4. Signed-off-by: Patrick Rudolph <patrick.rudolph(a)9elements.com> --- lib/acpi/acpi_table.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/acpi/acpi_table.c b/lib/acpi/acpi_table.c index 6473d95c10..b9e12228fd 100644 --- a/lib/acpi/acpi_table.c +++ b/lib/acpi/acpi_table.c @@ -420,7 +420,7 @@ int acpi_write_dbg2_pci_uart(struct acpi_ctx *ctx, struct udevice *dev, static int acpi_write_spcr(struct acpi_ctx *ctx, const struct acpi_writer *entry) { struct serial_device_info serial_info = {0}; - ulong serial_address, serial_offset; + u64 serial_address, serial_offset; struct acpi_table_header *header; struct acpi_spcr *spcr; struct udevice *dev; @@ -473,7 +473,7 @@ static int acpi_write_spcr(struct acpi_ctx *ctx, const struct acpi_writer *entry } serial_width = serial_info.reg_width * 8; - serial_offset = serial_info.reg_offset << serial_info.reg_shift; + serial_offset = ((u64)serial_info.reg_offset) << serial_info.reg_shift; serial_address = serial_info.addr + serial_offset; /* Encode register access size */ -- 2.46.2

3 4

[RFC PATCH 0/2] apple: dart: Add driver specific instance of LMB
by Sughosh Ganu 30 Oct '24

30 Oct '24

Sughosh Ganu (2): lmb: refactor lmb push and pop functions apple: dart: use driver specific instance of LMB drivers/iommu/apple_dart.c | 67 +++++++++++++++++++++++++++++++++++++- include/lmb.h | 6 +++- lib/lmb.c | 21 +++++++++--- test/lib/lmb.c | 18 +++++----- 4 files changed, 96 insertions(+), 16 deletions(-) -- 2.34.1

2 5

[PATCH v3 0/2] Add support for Cool Pi GenBook
by Andy Yan 30 Oct '24

30 Oct '24

Support for Cool Pi GenBook is landing Linux 6.12-rc1, so also add the support for u-boot here. Changes in v3: - Remove upstreamed dt in genbook-u-boot.dtsi - Remove MMC releated config as there is no SD-card on this machine - Enable LED config - Enable rk8xx pmic - rename defconfig to coolpi-cm5-genbook-rk3588_defconfig - redefine BOOT_TARGETS Changes in v2: - Cherry pick it from https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebas… - split the dts to a separate commit - rename to genbook_cm5_rk3588 - move readme to doc/board, and write as reStructuredText format - alphabetically reorder - update doc/board/rockchip Andy Yan (2): arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook board: rockchip: Add support for rk3588 GenBook .../dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi | 20 + arch/arm/mach-rockchip/rk3588/Kconfig | 19 + board/coolpi/genbook_cm5_rk3588/Kconfig | 12 + board/coolpi/genbook_cm5_rk3588/MAINTAINERS | 7 + configs/coolpi-cm5-genbook-rk3588_defconfig | 101 +++++ doc/board/coolpi/genbook_cm5_rk3588.rst | 68 ++++ doc/board/coolpi/index.rst | 9 + doc/board/rockchip/rockchip.rst | 1 + .../rockchip/rk3588-coolpi-cm5-genbook.dts | 349 ++++++++++++++++++ include/configs/genbook-cm5-rk3588.h | 31 ++ 10 files changed, 617 insertions(+) create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi create mode 100644 board/coolpi/genbook_cm5_rk3588/Kconfig create mode 100644 board/coolpi/genbook_cm5_rk3588/MAINTAINERS create mode 100644 configs/coolpi-cm5-genbook-rk3588_defconfig create mode 100644 doc/board/coolpi/genbook_cm5_rk3588.rst create mode 100644 doc/board/coolpi/index.rst create mode 100644 dts/upstream/src/arm64/rockchip/rk3588-coolpi-cm5-genbook.dts create mode 100644 include/configs/genbook-cm5-rk3588.h -- 2.34.1

2 5

[PATCH v8 0/7] Add the USB5744 hub driver as per new DT binding
by Venkatesh Yadav Abbarapu 30 Oct '24

30 Oct '24

Add the usb5744/usb2744 hub driver which does the reset gpio toggling and the i2c initialization sequence. Tested the USB5744/USB2744 usb hub for usb0, usb1 with the DT nodes on KR260 board. Changes in v2: - Added the power_on_reset_us variable, for post-reset time. - Removed the DM_REGULATOR ifdef around the regulator API's. - Rename the i2c_init and fixed the return for the API's. Changes in v3: - Rename i2c_init to init. - Fixed the return values for the dev_read_phandle_with_args API. - Removed the unneccessary cast uint8_t *. Changes in v4: - Fixed the indentation issues. - Fixed the Reverse xmas tree for indentation. - Replaced dev_dbg to dev_err in all places. Changes in v5: - Add new API for usb_onboard_hub_reset. Changes in v6: - Add return for usb_onboard_hub_reset in probe. Changes in v7: - Sort the structure onboard_hub_data data. - Remove the variable gpio_desc * for dm_gpio_free(). Changes in v8: - Sort the list for usb5744_data. Venkatesh Yadav Abbarapu (7): usb: onboard-hub: Add reset-gpio support usb: onboard-hub: Fix the return values of regulator APIs usb: onboard-hub: add support for Microchip USB5744 usb: onboard-hub: Add i2c initialization for usb5744 hub usb: onboard-hub: Bail out if peer hub is already probed configs: zynqmp_kria: Enable the USB onboard hub arm64: zynqmp: Update the usb5744 hub node as per binding arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 +++++++ arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 +++ arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++- common/usb_onboard_hub.c | 190 ++++++++++++++++++++++++- configs/xilinx_zynqmp_kria_defconfig | 11 +- 6 files changed, 329 insertions(+), 11 deletions(-) -- 2.17.1

1 7