July 2023 - U-Boot

[PATCH 1/3] ARM: imx: Factor out parsing of ROM log
by Marek Vasut 17 Oct '23

17 Oct '23

From: Fedor Ross <fedor.ross(a)ifm.com> Factor out parsing of ROM log in function spl_mmc_emmc_boot_partition(). This can be helpful to detect a secondary image boot without fiddling around with MMC partitions. This way for example, U-Boot is able to detect a secondary image boot and can enter some fallback scenario like starting a recovery mode. Signed-off-by: Fedor Ross <fedor.ross(a)ifm.com> Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/mach-imx/imx8m/soc.c | 55 +++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index d5254886bed..b8d7a050dc9 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -647,19 +647,17 @@ struct rom_api *g_rom_api = (struct rom_api *)0x980; #if defined(CONFIG_IMX8M) #include <spl.h> -int spl_mmc_emmc_boot_partition(struct mmc *mmc) +int imx8m_detect_secondary_image_boot(void) { u32 *rom_log_addr = (u32 *)0x9e0; u32 *rom_log; u8 event_id; - int i, part; - - part = default_spl_mmc_emmc_boot_partition(mmc); + int i, boot_secondary = 0; /* If the ROM event log pointer is not valid. */ if (*rom_log_addr < 0x900000 || *rom_log_addr >= 0xb00000 || *rom_log_addr & 0x3) - return part; + return -EINVAL; /* Parse the ROM event ID version 2 log */ rom_log = (u32 *)(uintptr_t)(*rom_log_addr); @@ -667,7 +665,7 @@ int spl_mmc_emmc_boot_partition(struct mmc *mmc) event_id = rom_log[i] >> 24; switch (event_id) { case 0x00: /* End of list */ - return part; + return boot_secondary; /* Log entries with 1 parameter, skip 1 */ case 0x80: /* Start to perform the device initialization */ case 0x81: /* The boot device initialization completes */ @@ -685,24 +683,45 @@ int spl_mmc_emmc_boot_partition(struct mmc *mmc) continue; /* Boot from the secondary boot image */ case 0x51: - /* - * Swap the eMMC boot partitions in case there was a - * fallback event (i.e. primary image was corrupted - * and that corruption was recognized by the BootROM), - * so the SPL loads the rest of the U-Boot from the - * correct eMMC boot partition, since the BootROM - * leaves the boot partition set to the corrupted one. - */ - if (part == 1) - part = 2; - else if (part == 2) - part = 1; + boot_secondary = 1; continue; default: continue; } } + return boot_secondary; +} + +int spl_mmc_emmc_boot_partition(struct mmc *mmc) +{ + int part, ret; + + part = default_spl_mmc_emmc_boot_partition(mmc); + if (part == 0) + return part; + + ret = imx8m_detect_secondary_image_boot(); + if (ret < 0) { + printf("Could not get boot partition! Using %d\n", part); + return part; + } + + if (ret == 1) { + /* + * Swap the eMMC boot partitions in case there was a + * fallback event (i.e. primary image was corrupted + * and that corruption was recognized by the BootROM), + * so the SPL loads the rest of the U-Boot from the + * correct eMMC boot partition, since the BootROM + * leaves the boot partition set to the corrupted one. + */ + if (part == 1) + part = 2; + else if (part == 2) + part = 1; + } + return part; } #endif -- 2.40.1

2 4

[PATCH] mxs: Kconfig: Remove TARGET_XFI3 symbol
by Fabio Estevam 16 Oct '23

16 Oct '23

From: Fabio Estevam <festevam(a)denx.de> The xfi3 target has been removed by commit 539fba2c10e7 ("arm: Remove xfi3 board"), but it missed to remove an entry from the mxs Kconfig. Remove it. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- arch/arm/mach-imx/mxs/Kconfig | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index d3233d8d14f3..ccce6a78caa2 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -18,9 +18,6 @@ config TARGET_MX23EVK select PL01X_SERIAL select BOARD_EARLY_INIT_F -config TARGET_XFI3 - bool "Support xfi3" - endchoice config SYS_SOC -- 2.34.1

2 1

[PATCH] ARM: dts: imx: Switch USB1 port control to GPIO on Data Modul i.MX8M Plus eDM SBC
by Marek Vasut 16 Oct '23

16 Oct '23

The USB_PWR signal operation is not reliable on this DWC3 controller instance in case the signal is active high. Switch to GPIO control, which always behaves correctly. Perform the change in u-boot extras until this hits Linux upstream. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- .../dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi index dd0f34f3447..eafe9b9308c 100644 --- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi @@ -4,6 +4,7 @@ */ #include "imx8mp-u-boot.dtsi" +#include "imx8mp-pinfunc.h" / { aliases { @@ -17,6 +18,17 @@ dmo,ram-coding-gpios = <&gpio3 20 0>, <&gpio4 3 0>, <&gpio4 1 0>; }; + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB1_PWR"; + }; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog1>; @@ -113,6 +125,10 @@ bootph-pre-ram; }; +&usb3_phy0 { + vbus-supply = <&reg_usb1_vbus>; +}; + &usdhc2 { bootph-pre-ram; sd-uhs-sdr104; @@ -128,3 +144,17 @@ &wdog1 { bootph-pre-ram; }; + +&iomuxc { + usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x80 + >; + }; + + pinctrl_usb1_vbus: usb1-vbus-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x6 + >; + }; +}; -- 2.40.1

2 1

[PATCH v3 5/9] board_f: Fix corruption of relocaddr
by Simon Glass 16 Oct '23

16 Oct '23

When the video framebuffer comes from the bloblist, we should not change relocaddr to this address, since it interfers with the normal memory allocation. This fixes a boot loop in qemu-x86_64 Signed-off-by: Simon Glass <sjg(a)chromium.org> Fixes: 5bc610a7d9d ("common: board_f: Pass frame buffer info from SPL to u-boot") Suggested-by: Nikhil M Jain <n-jain1(a)ti.com> --- Changes in v3: - Reword the Kconfig help as suggested Changes in v2: - Add a Kconfig as the suggested conditional did not work common/board_f.c | 3 ++- drivers/video/Kconfig | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/common/board_f.c b/common/board_f.c index 7d2c380e91e..5173d0a0c2d 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -419,7 +419,8 @@ static int reserve_video(void) if (!ho) return log_msg_ret("blf", -ENOENT); video_reserve_from_bloblist(ho); - gd->relocaddr = ho->fb; + if (IS_ENABLED(CONFIG_VIDEO_RESERVE_SPL)) + gd->relocaddr = ho->fb; } else if (CONFIG_IS_ENABLED(VIDEO)) { ulong addr; int ret; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index b41dc60cec5..f2e56204d52 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1106,6 +1106,15 @@ config SPL_VIDEO_REMOVE if this option is enabled video driver will be removed at the end of SPL stage, beforeloading the next stage. +config VIDEO_RESERVE_SPL + bool + help + This adjusts reserve_video() to redirect memory reservation when it + sees a video handoff blob (BLOBLISTT_U_BOOT_VIDEO). This avoids the + memory used for framebuffer from being allocated by U-Boot proper, + thus preventing any further memory reservations done by U-Boot proper + from overwriting the framebuffer. + if SPL_SPLASH_SCREEN config SPL_SPLASH_SCREEN_ALIGN -- 2.41.0.487.g6d72f3e995-goog

4 25

[RESEND PATCH v3 0/3] rpi: Convert to standard boot
by Simon Glass 15 Oct '23

15 Oct '23

This series moves Raspberry Pi boards over to use standard boot. It also moves rpi over to use a text-based environment. Unfortunately it is not possible to empty the header file due to several CFG options. Fix the repeated "and and" while we are here. Note that this reduces rodata size by about 4.5KB. We could get another for a total image-size saving of about 15KB. This is mostly because HUSH_PARSER is not enabled anymore and the environment shrinks down by about 3.5K. Hush is not actually needed anymore, since standard boot does not use it. Also CMD_SYSBOOT is dropped since standard boot calls the pxe_utils code directly in that case. Changes in v3: - Rebase to -master Changes in v2: - Rebase to -next - Add new patch to disable DISTRO_DEFAULTS Simon Glass (3): arm: rpi: Switch to standard boot rpi: Disable DISTRO_DEFAULTS arm: rpi: Switch to a text environment board/raspberrypi/rpi/rpi.env | 77 +++++++++++++++++++ configs/rpi_0_w_defconfig | 2 +- configs/rpi_2_defconfig | 2 +- configs/rpi_3_32b_defconfig | 2 +- configs/rpi_3_b_plus_defconfig | 2 +- configs/rpi_3_defconfig | 2 +- configs/rpi_4_32b_defconfig | 2 +- configs/rpi_4_defconfig | 2 +- configs/rpi_arm64_defconfig | 2 +- configs/rpi_defconfig | 2 +- include/configs/rpi.h | 134 --------------------------------- 11 files changed, 86 insertions(+), 143 deletions(-) create mode 100644 board/raspberrypi/rpi/rpi.env -- 2.41.0.487.g6d72f3e995-goog

2 13

[PATCH v3 0/2] dfu: mtd: mark bad the MTD block on erase error
by Patrick Delaunay 13 Oct '23

13 Oct '23

V3 for http://patchwork.ozlabs.org/project/uboot/list/?series=357878 after remarks and missing impact after comts d9fa61f54e7f9a ("mtd: nand: Show reserved block in chip.erase") and cfb82f7c123e4 ("mtd: nand: Mark reserved blocks") Patrick Changes in v3: - Split serie with trace fix and support of bad block in MTD erase - Fix trace for "bbt reserved" when mtd_block_isbad return 2 Changes in v2: - fix mtd_block_isbad offset parameter for erase check - Add trace when bad block are skipped in erase loop - Add remaining byte in trace "Limit reached" Patrick Delaunay (2): dfu: mtd: fix the trace when limit is reached dfu: mtd: mark bad the MTD block on erase error drivers/dfu/dfu_mtd.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) -- 2.25.1

3 5

[PATCH 0/4] clk: imx: add i.MX93 CCF driver
by Sébastien Szymanski 13 Oct '23

13 Oct '23

This series adds i.MX93 CCF driver, modifed from Linux kernel 6.5-rc2 and adapted for U-Boot. Patches 2 and 3 come from NXP U-Boot. A boot log and a dump of the clock tree are available at the following URL: https://pastebin.com/7WbubSXK Alice Guo (1): arm: dts: imx93: add a per clock for LPUART1 Sébastien Szymanski (2): clk: imx: add i.MX93 CCF driver imx93_evk: defconfig: enable clock driver Ye Li (1): serial: lpuart: Enable IPG clock arch/arm/dts/imx93-11x11-evk-u-boot.dtsi | 23 ++ arch/arm/dts/imx93.dtsi | 4 +- board/freescale/imx93_evk/imx93_evk.c | 2 - configs/imx93_11x11_evk_defconfig | 2 + drivers/clk/imx/Kconfig | 18 ++ drivers/clk/imx/Makefile | 2 + drivers/clk/imx/clk-composite-93.c | 142 +++++++++ drivers/clk/imx/clk-fracn-gppll.c | 382 +++++++++++++++++++++++ drivers/clk/imx/clk-gate-93.c | 148 +++++++++ drivers/clk/imx/clk-imx93.c | 343 ++++++++++++++++++++ drivers/clk/imx/clk.h | 42 +++ drivers/serial/serial_lpuart.c | 14 +- include/dt-bindings/clock/imx93-clock.h | 6 +- 13 files changed, 1122 insertions(+), 6 deletions(-) create mode 100644 drivers/clk/imx/clk-composite-93.c create mode 100644 drivers/clk/imx/clk-fracn-gppll.c create mode 100644 drivers/clk/imx/clk-gate-93.c create mode 100644 drivers/clk/imx/clk-imx93.c -- 2.41.0

1 5

[PATCH] ARM: stm32: Power cycle Buck3 in reset on DHSOM
by Marek Vasut 12 Oct '23

12 Oct '23

In case the DHSOM is in suspend state and either reset button is pushed or IWDG2 triggers a watchdog reset, then DRAM initialization could fail as follows: " RAM: DDR3L 32bits 2x4Gb 533MHz DDR invalid size : 0x4, expected 0x40000000 DRAM init failed: -22 ### ERROR ### Please RESET the board ### " Avoid this failure by not keeping any Buck regulators enabled during reset, let the SoC and DRAMs power cycle fully. Since the change which keeps Buck3 VDD enabled during reset is ST specific, move this addition to ST specific SPL board initialization so that it wouldn't affect the DHSOM . Signed-off-by: Marek Vasut <marex(a)denx.de> --- NOTE: This is 2023.07 material NOTE: d1a4b09de64 ("board: st: stpmic1: add function stpmic1_init") mentions 'keep vdd on during the reset cycle (to avoid issue when backup battery is absent)', but there is no further description of the 'issue'. Can you please elaborate ? --- Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: Patrick Delaunay <patrick.delaunay(a)foss.st.com> Cc: uboot-stm32(a)st-md-mailman.stormreply.com --- board/st/common/stpmic1.c | 10 +++------- board/st/common/stpmic1.h | 2 +- board/st/stm32mp1/spl.c | 13 +++++++++++-- 3 files changed, 15 insertions(+), 10 deletions(-) diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c index d52dce4f657..969ad484864 100644 --- a/board/st/common/stpmic1.c +++ b/board/st/common/stpmic1.c @@ -185,21 +185,17 @@ static int stmpic_buck1_set(struct udevice *dev, u32 voltage_mv) } /* early init of PMIC */ -void stpmic1_init(u32 voltage_mv) +struct udevice *stpmic1_init(u32 voltage_mv) { struct udevice *dev; if (uclass_get_device_by_driver(UCLASS_PMIC, DM_DRIVER_GET(pmic_stpmic1), &dev)) - return; + return NULL; /* update VDDCORE = BUCK1 */ if (voltage_mv) stmpic_buck1_set(dev, voltage_mv); - /* Keep vdd on during the reset cycle */ - pmic_clrsetbits(dev, - STPMIC1_BUCKS_MRST_CR, - STPMIC1_MRST_BUCK(STPMIC1_BUCK3), - STPMIC1_MRST_BUCK(STPMIC1_BUCK3)); + return dev; } diff --git a/board/st/common/stpmic1.h b/board/st/common/stpmic1.h index b17d6f16338..7a7169d7cea 100644 --- a/board/st/common/stpmic1.h +++ b/board/st/common/stpmic1.h @@ -3,4 +3,4 @@ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ -void stpmic1_init(u32 voltage_mv); +struct udevice *stpmic1_init(u32 voltage_mv); diff --git a/board/st/stm32mp1/spl.c b/board/st/stm32mp1/spl.c index 747ec7e445a..8b4a529f759 100644 --- a/board/st/stm32mp1/spl.c +++ b/board/st/stm32mp1/spl.c @@ -5,6 +5,8 @@ #include <config.h> #include <common.h> +#include <power/pmic.h> +#include <power/stpmic1.h> #include <asm/arch/sys_proto.h> #include "../common/stpmic1.h" @@ -19,8 +21,15 @@ void board_vddcore_init(u32 voltage_mv) int board_early_init_f(void) { - if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER)) - stpmic1_init(opp_voltage_mv); + if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER)) { + struct udevice *dev = stpmic1_init(opp_voltage_mv); + + /* Keep vdd on during the reset cycle */ + pmic_clrsetbits(dev, + STPMIC1_BUCKS_MRST_CR, + STPMIC1_MRST_BUCK(STPMIC1_BUCK3), + STPMIC1_MRST_BUCK(STPMIC1_BUCK3)); + } return 0; } -- 2.39.2

3 11

[PATCH v5 00/11] Add ethernet driver for StarFive JH7110 SoC
by Yanhong Wang 11 Oct '23

11 Oct '23

This series of patches base on the latest branch/master,and adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes EEPROM, PHY and MAC drivers. The PHY model is YT8531 (from Motorcomm Inc), and the MAC version is dwmac-5.20 (from Synopsys DesignWare). The implementation of the phy driver is ported from linux, but it has been adjusted for the u-boot framework. EEPROM stores board-related information, such as DDR capacity, PCB version, MAC address, etc. The main difference between StarFive VisionFive 2 1.2A and 1.3B is gmac, but the difference in gmac is not defined in DT, but reads the PCB version from EEPROM, and then dynamically configures the difference of gmac according to different PCB versions, which is compatible with 1.2A and 1.3B versions, which is more user-friendly. The PHY and MAC driver has been tested on the StarFive VisionFive 2 1.2A and 1.3B boards and works normally. For more information and support,you can visit RVspace wiki[1]. [1] https://wiki.rvspace.org/ v5: - Reorder a series of patches to make each patch is independent. - Move CONFIG_DEFAULT_FDT_FILE and CONFIG_DEFAULT_DEVICE_TREE changes to patch 4. - Move the definition of 'board_fdt_blob_setup' to patch 9. v4: - Reworded the definition of the 'pbuf' variable in visionfive2-i2c-eeprom.c from a const pointer to const union. - Added the section (".data") attribute to the 'pbuf' and 'has_been_read' global variables in visionfive2-i2-eeprom.c. v3: - Added EEPROM support. - Combine the board device tree of 1.2A and 1.3B into one. - Removed the delay configuration of gmac phy clock from DT. - Dynamically configure gmac differences of 1.2A and 1.3B to DT according to the PCB version. - DDR capacity information is read from EEPROM first, if not, it is defined by default in DT. v2: - Reworded the phy driver. Added platform private data struct to save the configuration data read from dts. - Reworded the MAC driver. Added platform private data struct to save the configuration data read from dts. Previous versions: v1 - https://patchwork.ozlabs.org/project/uboot/cover/20230317010536.17860-1-yan… v2 - https://patchwork.ozlabs.org/project/uboot/cover/20230329102720.25439-1-yan… v3 - https://patchwork.ozlabs.org/project/uboot/cover/20230428022515.29393-1-yan… v4 - https://patchwork.ozlabs.org/project/uboot/cover/20230525093637.31364-1-yan… Yanhong Wang (11): net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy net: dwc_eth_qos: Add StarFive ethernet driver glue layer riscv: dts: jh7110: Add ethernet device tree nodes riscv: dts: jh7110: Combine the board device tree files of 1.2A and 1.3B doc: board: starfive:　Reword the make defconfig information configs: starfive: Enable ethernet configuration for StarFive VisionFive2 eeprom: starfive: Enable ID EEPROM configuration riscv: dts: starfive: Add support eeprom device tree node configs: starfive: Enable ID EEPROM configuration ram: starfive: Read memory size information from EEPROM board: starfive: Dynamic configuration of DT for 1.2A and 1.3B arch/riscv/cpu/jh7110/spl.c | 32 +- arch/riscv/dts/Makefile | 3 +- ... jh7110-starfive-visionfive-2-u-boot.dtsi} | 39 +- .../jh7110-starfive-visionfive-2-v1.2a.dts | 12 - ...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 69 --- ...b.dts => jh7110-starfive-visionfive-2.dts} | 3 +- .../dts/jh7110-starfive-visionfive-2.dtsi | 40 ++ arch/riscv/dts/jh7110.dtsi | 69 +++ arch/riscv/include/asm/arch-jh7110/eeprom.h | 13 + board/starfive/visionfive2/Makefile | 1 + board/starfive/visionfive2/spl.c | 157 +++++ .../visionfive2/starfive_visionfive2.c | 13 + .../visionfive2/visionfive2-i2c-eeprom.c | 561 ++++++++++++++++++ configs/starfive_visionfive2_defconfig | 32 +- doc/board/starfive/visionfive2.rst | 6 +- drivers/net/Kconfig | 7 + drivers/net/Makefile | 1 + drivers/net/dwc_eth_qos.c | 6 + drivers/net/dwc_eth_qos.h | 1 + drivers/net/dwc_eth_qos_starfive.c | 249 ++++++++ drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/motorcomm.c | 437 ++++++++++++++ drivers/ram/starfive/starfive_ddr.c | 2 - 24 files changed, 1665 insertions(+), 95 deletions(-) rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} (58%) delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} (65%) create mode 100644 arch/riscv/include/asm/arch-jh7110/eeprom.h create mode 100644 board/starfive/visionfive2/visionfive2-i2c-eeprom.c create mode 100644 drivers/net/dwc_eth_qos_starfive.c create mode 100644 drivers/net/phy/motorcomm.c base-commit: 19b77d3d23966a0d6dbb3c86187765f11100fb6f -- 2.17.1

4 22

[PATCH v4] imx: imx8mm: Add support for Mettler-Toledo snowflake board.
by Sebastian Andrzej Siewior 07 Oct '23

07 Oct '23

The board is similar to "Kontron SL i.MX8M Mini" SoM. There are two variants. Snowflake_v2 has an external SDCard Interface. LEIG is the same, but without display and without external SDCard Interface. Both variants support only 1GiB of main memory. [ bigeasy: porting and a bit of cleanup ] Signed-off-by: Manuel Traut <manuel.traut(a)mt.com> Reviewed-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> --- v3…v4: - Added Frieder's tag - Rebased on top of v2023.07-rc5. v2…v3: Addressing Frieder's comments: - Add "kontron,imx8mm-sl" to the compatible string. - Remove pca9450 node and pinctrl_i2c1. The included imx8mm-kontron-sl.dtsi already provides this. - Merge the overwritten values in dram_timing.ddrc_cfg/fsp_msg directly into lpddr4_timing.c. - Simplify the init in spl_dram_init() and panic() if the init failed. - Replace a reference to SMARC with the current product name of the SoM. v1…v2: - Clarify details about the board and whether or not there is an external SD-card interface. arch/arm/dts/Makefile | 1 + .../dts/imx8mm-mt-snowflake-v2-u-boot.dtsi | 116 ++ arch/arm/dts/imx8mm-mt-snowflake-v2.dts | 76 + arch/arm/mach-imx/imx8m/Kconfig | 8 + board/mt/snowflake_v2/Kconfig | 18 + board/mt/snowflake_v2/MAINTAINERS | 7 + board/mt/snowflake_v2/Makefile | 9 + board/mt/snowflake_v2/imximage.cfg | 8 + board/mt/snowflake_v2/lpddr4_timing.c | 1844 +++++++++++++++++ board/mt/snowflake_v2/snowflake_v2.c | 32 + board/mt/snowflake_v2/snowflake_v2.env | 33 + board/mt/snowflake_v2/spl.c | 147 ++ configs/snowflake_v2_emmcboot_defconfig | 134 ++ include/configs/snowflake_v2.h | 55 + 14 files changed, 2488 insertions(+) create mode 100644 arch/arm/dts/imx8mm-mt-snowflake-v2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-mt-snowflake-v2.dts create mode 100644 board/mt/snowflake_v2/Kconfig create mode 100644 board/mt/snowflake_v2/MAINTAINERS create mode 100644 board/mt/snowflake_v2/Makefile create mode 100644 board/mt/snowflake_v2/imximage.cfg create mode 100644 board/mt/snowflake_v2/lpddr4_timing.c create mode 100644 board/mt/snowflake_v2/snowflake_v2.c create mode 100644 board/mt/snowflake_v2/snowflake_v2.env create mode 100644 board/mt/snowflake_v2/spl.c create mode 100644 configs/snowflake_v2_emmcboot_defconfig create mode 100644 include/configs/snowflake_v2.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 480269fa60653..c0806b92c7bf4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -981,6 +981,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-icore-mx8mm-edimm2.2.dtb \ imx8mm-kontron-bl.dtb \ imx8mm-kontron-bl-osm-s.dtb \ + imx8mm-mt-snowflake-v2.dtb \ imx8mm-mx8menlo.dtb \ imx8mm-phg.dtb \ imx8mm-venice.dtb \ diff --git a/arch/arm/dts/imx8mm-mt-snowflake-v2-u-boot.dtsi b/arch/arm/dts/imx8mm-mt-snowflake-v2-u-boot.dtsi new file mode 100644 index 0000000000000..d6476db292b79 --- /dev/null +++ b/arch/arm/dts/imx8mm-mt-snowflake-v2-u-boot.dtsi @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Mettler Toledo GmbH + */ + +/ { + + aliases { + usbgadget0 = &usbg1; + }; + + usbg1: usbg1 { + u-boot,dm-spl; + compatible = "fsl,imx27-usb-gadget"; + dr_mode = "peripheral"; + chipidea,usb = <&usbotg1>; + status = "okay"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&i2c1 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&i2c2 { + status = "okay"; + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-spl; +}; + +&pinctrl_i2c1 { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; +}; + +&pinctrl_uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1_200mhz { + u-boot,dm-spl; +}; + +&pca9450 { + u-boot,dm-spl; +}; + +&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} { + u-boot,dm-spl; +}; + +&ecspi1 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&uart3 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; + +&pinctrl_wdog { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mm-mt-snowflake-v2.dts b/arch/arm/dts/imx8mm-mt-snowflake-v2.dts new file mode 100644 index 0000000000000..f56997543e6d9 --- /dev/null +++ b/arch/arm/dts/imx8mm-mt-snowflake-v2.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Mettler Toledo GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-sl.dtsi" +#include "imx8mm-u-boot.dtsi" + +/ { + model = "Mettler Toledo i.MX8MM Snowflake V2"; + compatible = "mt,imx8mm-snowflake-v2", "kontron,imx8mm-sl", "fsl,imx8mm"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* \SOM_RTC_INT */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* \SOM_USBC_INT */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 /* SOM_DIS_ID0 */ + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184 /* SOM_DIS_ID1 */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184 /* SOM_DIS_ID2 */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* SOM_PCB_ID0 */ + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x19 /* SOM_PCB_ID1 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* SOM_PCBA_ID0 */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* SOM_PCBA_ID1 */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19 /* \SOM_STATLED_RES */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 /* \SOM_HUB_RES */ + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 /* \SOM_SUPPLY_EN */ + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4 /* \SOM_COM_RES / version C */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x184 /* SOM_DBG_GPIO0 */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x184 /* SOM_DBG_GPIO1 */ + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184 /* SOM_DBG_GPIO2 */ + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x184 /* SOM_DBG_GPIO3 version C */ + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0xd6 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; +}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 7639439bdc97c..bd87511292894 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -167,6 +167,13 @@ config TARGET_IMX8MN_DDR4_EVK select FSL_CAAM select SPL_CRYPTO if SPL +config TARGET_MT_SNOWFLAKE_V2 + bool "MT Snowflake v2" + select BINMAN + select IMX8MM + select SUPPORT_SPL + select IMX8M_LPDDR4 + config TARGET_IMX8MN_VENICE bool "Support Gateworks Venice iMX8M Nano module" select BINMAN @@ -369,6 +376,7 @@ source "board/kontron/sl-mx8mm/Kconfig" source "board/menlo/mx8menlo/Kconfig" source "board/msc/sm2s_imx8mp/Kconfig" source "board/mntre/imx8mq_reform2/Kconfig" +source "board/mt/snowflake_v2/Kconfig" source "board/phytec/phycore_imx8mm/Kconfig" source "board/phytec/phycore_imx8mp/Kconfig" source "board/purism/librem5/Kconfig" diff --git a/board/mt/snowflake_v2/Kconfig b/board/mt/snowflake_v2/Kconfig new file mode 100644 index 0000000000000..f7c02ba1fbf61 --- /dev/null +++ b/board/mt/snowflake_v2/Kconfig @@ -0,0 +1,18 @@ +if TARGET_MT_SNOWFLAKE_V2 + +config SYS_BOARD + string + default "snowflake_v2" + +config SYS_VENDOR + string + default "mt" + +config SYS_CONFIG_NAME + string + default "snowflake_v2" + +config IMX_CONFIG + default "board/mt/snowflake_v2/imximage.cfg" + +endif diff --git a/board/mt/snowflake_v2/MAINTAINERS b/board/mt/snowflake_v2/MAINTAINERS new file mode 100644 index 0000000000000..e60d24e32f57e --- /dev/null +++ b/board/mt/snowflake_v2/MAINTAINERS @@ -0,0 +1,7 @@ +Mettler-Toledo Snowflake boards +M: Manuel Traut <manuel.traut(a)mt.com> +S: Maintained +F: arch/arm/dts/imx8mm-mt-snowflake* +F: board/mt/snowflake_v2 +F: configs/snowflake_v2_emmcboot_defconfig +F: include/configs/snowflake_v2.h diff --git a/board/mt/snowflake_v2/Makefile b/board/mt/snowflake_v2/Makefile new file mode 100644 index 0000000000000..6ced8f5b3e5ca --- /dev/null +++ b/board/mt/snowflake_v2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 Mettler Toledo GmbH + +obj-y := snowflake_v2.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif diff --git a/board/mt/snowflake_v2/imximage.cfg b/board/mt/snowflake_v2/imximage.cfg new file mode 100644 index 0000000000000..20061521f227e --- /dev/null +++ b/board/mt/snowflake_v2/imximage.cfg @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 NXP + */ + + +BOOT_FROM sd +LOADER u-boot-spl-ddr.bin 0x7E1000 diff --git a/board/mt/snowflake_v2/lpddr4_timing.c b/board/mt/snowflake_v2/lpddr4_timing.c new file mode 100644 index 0000000000000..6bfd10266ca99 --- /dev/null +++ b/board/mt/snowflake_v2/lpddr4_timing.c @@ -0,0 +1,1844 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + { 0x3d400304, 0x1 }, + { 0x3d400030, 0x1 }, + { 0x3d400000, 0xa1080020 }, + { 0x3d400020, 0x223 }, + { 0x3d400024, 0x3a980 }, + { 0x3d400064, 0x5b0087 }, + { 0x3d4000d0, 0xc00305ba }, + { 0x3d4000d4, 0x940000 }, + { 0x3d4000dc, 0xd4002d }, + { 0x3d4000e0, 0x310000 }, + { 0x3d4000e8, 0x66004d }, + { 0x3d4000ec, 0x16004d }, + { 0x3d400100, 0x191e1920 }, + { 0x3d400104, 0x60630 }, + { 0x3d40010c, 0xb0b000 }, + { 0x3d400110, 0xe04080e }, + { 0x3d400114, 0x2040c0c }, + { 0x3d400118, 0x1010007 }, + { 0x3d40011c, 0x401 }, + { 0x3d400130, 0x20600 }, + { 0x3d400134, 0xc100002 }, + { 0x3d400138, 0xd8 }, + { 0x3d400144, 0x96004b }, + { 0x3d400180, 0x2ee0017 }, + { 0x3d400184, 0x2605b8e }, + { 0x3d400188, 0x0 }, + { 0x3d400190, 0x497820a }, + { 0x3d400194, 0x80303 }, + { 0x3d4001b4, 0x170a }, + { 0x3d4001a0, 0xe0400018 }, + { 0x3d4001a4, 0xdf00e4 }, + { 0x3d4001a8, 0x80000000 }, + { 0x3d4001b0, 0x11 }, + { 0x3d4001c0, 0x1 }, + { 0x3d4001c4, 0x1 }, + { 0x3d4000f4, 0xc99 }, + { 0x3d400108, 0x70e1617 }, + { 0x3d400200, 0x1f }, + { 0x3d40020c, 0x0 }, + { 0x3d400210, 0x1f1f }, + { 0x3d400204, 0x80808 }, + { 0x3d400214, 0x7070707 }, + { 0x3d400218, 0x7070707 }, + { 0x3d400250, 0x29001701 }, + { 0x3d400254, 0x2c }, + { 0x3d40025c, 0x4000030 }, + { 0x3d400264, 0x900093e7 }, + { 0x3d40026c, 0x2005574 }, + { 0x3d400400, 0x111 }, + { 0x3d400408, 0x72ff }, + { 0x3d400494, 0x2100e07 }, + { 0x3d400498, 0x620096 }, + { 0x3d40049c, 0x1100e07 }, + { 0x3d4004a0, 0xc8012c }, + { 0x3d402020, 0x21 }, + { 0x3d402024, 0x7d00 }, + { 0x3d402050, 0x20d040 }, + { 0x3d402064, 0xc001c }, + { 0x3d4020dc, 0x840000 }, + { 0x3d4020e0, 0x310000 }, + { 0x3d4020e8, 0x66004d }, + { 0x3d4020ec, 0x16004d }, + { 0x3d402100, 0xa040305 }, + { 0x3d402104, 0x30407 }, + { 0x3d402108, 0x203060b }, + { 0x3d40210c, 0x505000 }, + { 0x3d402110, 0x2040202 }, + { 0x3d402114, 0x2030202 }, + { 0x3d402118, 0x1010004 }, + { 0x3d40211c, 0x301 }, + { 0x3d402130, 0x20300 }, + { 0x3d402134, 0xa100002 }, + { 0x3d402138, 0x1d }, + { 0x3d402144, 0x14000a }, + { 0x3d402180, 0x640004 }, + { 0x3d402190, 0x3818200 }, + { 0x3d402194, 0x80303 }, + { 0x3d4021b4, 0x100 }, + { 0x3d403020, 0x21 }, + { 0x3d403024, 0x1f40 }, + { 0x3d403050, 0x20d040 }, + { 0x3d403064, 0x30007 }, + { 0x3d4030dc, 0x840000 }, + { 0x3d4030e0, 0x310000 }, + { 0x3d4030e8, 0x66004d }, + { 0x3d4030ec, 0x16004d }, + { 0x3d403100, 0xa010102 }, + { 0x3d403104, 0x30404 }, + { 0x3d403108, 0x203060b }, + { 0x3d40310c, 0x505000 }, + { 0x3d403110, 0x2040202 }, + { 0x3d403114, 0x2030202 }, + { 0x3d403118, 0x1010004 }, + { 0x3d40311c, 0x301 }, + { 0x3d403130, 0x20300 }, + { 0x3d403134, 0xa100002 }, + { 0x3d403138, 0x8 }, + { 0x3d403144, 0x50003 }, + { 0x3d403180, 0x190004 }, + { 0x3d403190, 0x3818200 }, + { 0x3d403194, 0x80303 }, + { 0x3d4031b4, 0x100 }, + { 0x3d400028, 0x0 }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param ddr_ddrphy_cfg[] = { + { 0x100a0, 0x0 }, + { 0x100a1, 0x1 }, + { 0x100a2, 0x2 }, + { 0x100a3, 0x3 }, + { 0x100a4, 0x4 }, + { 0x100a5, 0x5 }, + { 0x100a6, 0x6 }, + { 0x100a7, 0x7 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x1 }, + { 0x110a2, 0x3 }, + { 0x110a3, 0x4 }, + { 0x110a4, 0x5 }, + { 0x110a5, 0x2 }, + { 0x110a6, 0x7 }, + { 0x110a7, 0x6 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x1 }, + { 0x120a2, 0x3 }, + { 0x120a3, 0x2 }, + { 0x120a4, 0x5 }, + { 0x120a5, 0x4 }, + { 0x120a6, 0x7 }, + { 0x120a7, 0x6 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x1 }, + { 0x130a2, 0x2 }, + { 0x130a3, 0x3 }, + { 0x130a4, 0x4 }, + { 0x130a5, 0x5 }, + { 0x130a6, 0x6 }, + { 0x130a7, 0x7 }, + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x20024, 0x1ab }, + { 0x2003a, 0x0 }, + { 0x120024, 0x1ab }, + { 0x2003a, 0x0 }, + { 0x220024, 0x1ab }, + { 0x2003a, 0x0 }, + { 0x20056, 0x3 }, + { 0x120056, 0x3 }, + { 0x220056, 0x3 }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + { 0x10049, 0xeba }, + { 0x10149, 0xeba }, + { 0x11049, 0xeba }, + { 0x11149, 0xeba }, + { 0x12049, 0xeba }, + { 0x12149, 0xeba }, + { 0x13049, 0xeba }, + { 0x13149, 0xeba }, + { 0x110049, 0xeba }, + { 0x110149, 0xeba }, + { 0x111049, 0xeba }, + { 0x111149, 0xeba }, + { 0x112049, 0xeba }, + { 0x112149, 0xeba }, + { 0x113049, 0xeba }, + { 0x113149, 0xeba }, + { 0x210049, 0xeba }, + { 0x210149, 0xeba }, + { 0x211049, 0xeba }, + { 0x211149, 0xeba }, + { 0x212049, 0xeba }, + { 0x212149, 0xeba }, + { 0x213049, 0xeba }, + { 0x213149, 0xeba }, + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x2ee }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0xdc }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0xdc }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0xdc }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + { 0x200c7, 0x21 }, + { 0x1200c7, 0x21 }, + { 0x2200c7, 0x21 }, + { 0x200ca, 0x24 }, + { 0x1200ca, 0x24 }, + { 0x2200ca, 0x24 }, +}; + +/* ddr phy trained csr */ +struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xbb8 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x11 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400d, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d00 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d00 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xd400 }, + { 0x54033, 0x312d }, + { 0x54034, 0x6600 }, + { 0x54035, 0x4d }, + { 0x54036, 0x4d }, + { 0x54037, 0x1600 }, + { 0x54038, 0xd400 }, + { 0x54039, 0x312d }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x4d }, + { 0x5403c, 0x4d }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x11 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400d, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d00 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d00 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3100 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x4d }, + { 0x54036, 0x4d }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3100 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x4d }, + { 0x5403c, 0x4d }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x11 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400d, 0x100 }, + { 0x54012, 0x110 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d00 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d00 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3100 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x4d }, + { 0x54036, 0x4d }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3100 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x4d }, + { 0x5403c, 0x4d }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xbb8 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x11 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54012, 0x110 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, 0x31 }, + { 0x5401b, 0x4d66 }, + { 0x5401c, 0x4d00 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, 0x31 }, + { 0x54021, 0x4d66 }, + { 0x54022, 0x4d00 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x1 }, + { 0x54032, 0xd400 }, + { 0x54033, 0x312d }, + { 0x54034, 0x6600 }, + { 0x54035, 0x4d }, + { 0x54036, 0x4d }, + { 0x54037, 0x1600 }, + { 0x54038, 0xd400 }, + { 0x54039, 0x312d }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x4d }, + { 0x5403c, 0x4d }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param ddr_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xf }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x630 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x630 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x630 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x630 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x630 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x630 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x630 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x630 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x630 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x630 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x630 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x630 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x630 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xa }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x900a4, 0x10 }, + { 0x900a5, 0x10 }, + { 0x900a6, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a7, 0x0 }, + { 0x900a8, 0x790 }, + { 0x900a9, 0x11a }, + { 0x900aa, 0x8 }, + { 0x900ab, 0x7aa }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x10 }, + { 0x900ae, 0x7b2 }, + { 0x900af, 0x2a }, + { 0x900b0, 0x0 }, + { 0x900b1, 0x7c8 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x0 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xc }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x0 }, + { 0x90159, 0x400 }, + { 0x9015a, 0x10e }, + { 0x9015b, 0x8 }, + { 0x9015c, 0xe8 }, + { 0x9015d, 0x109 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x8140 }, + { 0x90160, 0x10c }, + { 0x90161, 0x10 }, + { 0x90162, 0x8138 }, + { 0x90163, 0x10c }, + { 0x90164, 0x8 }, + { 0x90165, 0x7c8 }, + { 0x90166, 0x101 }, + { 0x90167, 0x8 }, + { 0x90168, 0x0 }, + { 0x90169, 0x8 }, + { 0x9016a, 0x8 }, + { 0x9016b, 0x448 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0xf }, + { 0x9016e, 0x7c0 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x0 }, + { 0x90171, 0xe8 }, + { 0x90172, 0x109 }, + { 0x90173, 0x47 }, + { 0x90174, 0x630 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0x618 }, + { 0x90178, 0x109 }, + { 0x90179, 0x8 }, + { 0x9017a, 0xe0 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x0 }, + { 0x9017d, 0x7c8 }, + { 0x9017e, 0x109 }, + { 0x9017f, 0x8 }, + { 0x90180, 0x8140 }, + { 0x90181, 0x10c }, + { 0x90182, 0x0 }, + { 0x90183, 0x1 }, + { 0x90184, 0x8 }, + { 0x90185, 0x8 }, + { 0x90186, 0x4 }, + { 0x90187, 0x8 }, + { 0x90188, 0x8 }, + { 0x90189, 0x7c8 }, + { 0x9018a, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x2a }, + { 0x90026, 0x6a }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x5d }, + { 0x2000c, 0xbb }, + { 0x2000d, 0x753 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0xc }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x120010, 0x5a }, + { 0x120011, 0x3 }, + { 0x220010, 0x5a }, + { 0x220011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 } +}; + +struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 3000mts 1D */ + .drate = 3000, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 3000mts 2D */ + .drate = 3000, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 3000, 400, 100, }, +}; diff --git a/board/mt/snowflake_v2/snowflake_v2.c b/board/mt/snowflake_v2/snowflake_v2.c new file mode 100644 index 0000000000000..6510225321a06 --- /dev/null +++ b/board/mt/snowflake_v2/snowflake_v2.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + * Copyright (C) 2020 Mettler Toledo GmbH + */ + +#include <asm/arch/imx-regs.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <linux/arm-smccc.h> +#include <linux/errno.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_phys_sdram_size(phys_size_t *size) +{ + /* always 1GB RAM */ + *size = 0x40000000; + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + return fdt_fixup_memory(blob, PHYS_SDRAM, gd->ram_size); +} + +int board_init(void) +{ + return 0; +} diff --git a/board/mt/snowflake_v2/snowflake_v2.env b/board/mt/snowflake_v2/snowflake_v2.env new file mode 100644 index 0000000000000..1ad9a2b2e17e7 --- /dev/null +++ b/board/mt/snowflake_v2/snowflake_v2.env @@ -0,0 +1,33 @@ +bootargs_base=console=ttymxc2,115200 vt.global_cursor_default=0 fbcon=font:VGA8x8 +script=boot.scr +bootdir= +bootdelay=1 +bootpart=1 +bootchooser=run bootchooser_1; run bootchooser_2; run bootchooser_3 +bootchooser_1=test -n ${BOOT_ORDER} || setenv BOOT_ORDER "system0 system1"; + test -n ${BOOT_system0_LEFT} || setenv BOOT_system0_LEFT 3; + test -n ${BOOT_system1_LEFT} || setenv BOOT_system1_LEFT 3; + setenv rauc_slot; +bootchooser_2=for BOOT_SLOT in ${BOOT_ORDER}; do if test x${rauc_slot} != x; then; + elif test x${BOOT_SLOT} = xsystem0; then + if test ${BOOT_system0_LEFT} -gt 0; then + echo Found valid slot system0, ${BOOT_system0_LEFT} attempts remaining; + setexpr BOOT_system0_LEFT ${BOOT_system0_LEFT} - 1; + setenv bootpart 1; setenv rauc_slot rauc.slot=system0; fi; + elif test x${BOOT_SLOT} = xsystem1; then + if test ${BOOT_system1_LEFT} -gt 0; then + echo Found valid slot system1, ${BOOT_system1_LEFT} attempts remaining; + setexpr BOOT_system1_LEFT ${BOOT_system1_LEFT} - 1; + setenv bootpart 2; setenv rauc_slot rauc.slot=system1; fi; fi; done +bootchooser_3=if test -n ${rauc_slot}; then saveenv; else + echo No valid slot found, resetting tries to 3; + setenv BOOT_system0_LEFT 3; setenv BOOT_system1_LEFT 3; + saveenv; reset; fi; echo Booting from ${rauc_slot}...; +emmcboot=run bootchooser; setenv bootargs ${bootargs_base} + root=/dev/mmcblk0p${bootpart} ro rootfstype=ext4 rootwait ${rauc_slot}; + echo Booting from eMMC; + ext4load mmc 0:${bootpart} ${scriptaddr} /boot/fitImage && bootm ${scriptaddr} +sdboot=run bootchooser; setenv bootargs ${bootargs_base} + root=/dev/mmcblk1p${bootpart} ro rootfstype=ext4 rootwait ${rauc_slot}; + echo Booting from SD card; + ext4load mmc 1:${bootpart} ${scriptaddr} /boot/fitImage && bootm ${scriptaddr} diff --git a/board/mt/snowflake_v2/spl.c b/board/mt/snowflake_v2/spl.c new file mode 100644 index 0000000000000..e28878db91cb3 --- /dev/null +++ b/board/mt/snowflake_v2/spl.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + * Copyright (C) 2020 Mettler Toledo GmbH + */ + +#include <common.h> +#include <spl.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/arch/ddr.h> +#include <asm/armv8/mmu.h> +#include <asm/gpio.h> + +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> + +#include <i2c.h> +#include <init.h> +#include <linux/delay.h> + +#include <power/pmic.h> +#include <power/pca9450.h> + +DECLARE_GLOBAL_DATA_PTR; + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + switch (boot_dev_spl) { + case SD1_BOOT: + case MMC1_BOOT: + return BOOT_DEVICE_MMC1; + case USB_BOOT: + return BOOT_DEVICE_BOARD; + default: + return BOOT_DEVICE_NONE; + } +} + +bool check_ram_available(long size) +{ + long sz = get_ram_size((long *)PHYS_SDRAM, size); + + if (sz == size) + return true; + + return false; +} + +void spl_dram_init(void) +{ + printf("Snowflake v2: DDR RAM INIT "); + + if (ddr_init(&dram_timing) || !check_ram_available(SZ_1G)) + panic("Init DDR RAM failed\n"); + + puts("1GB DDR RAM\n"); + writel(1, M4_BOOTROM_BASE_ADDR); +} + +int board_fit_config_name_match(const char *name) +{ + puts("Snowflake: FIT CONFIG check\n"); + if (is_imx8mm() && + !strcmp(name, "imx8mm-mt-snowflake-v2")) + return 0; + + puts("FIT CONFIG CHECK failed\n"); + return -1; +} + +int power_init_board(void) +{ + struct udevice *dev; + int ret = pmic_get("pmic@25", &dev); + + if (ret) { + puts("Snowflake: no PMIC\n"); + return ret; + } + + /* BUCKxOUT_DVS0/1 control BUCK123 output, clear PRESET_EN */ + pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29); + /* BUCK1 SOC 850mV */ + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14); + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14); + /* BUCK2 ARM 950mV/850mV */ + pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1C); + pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS1, 0x14); + /* BUCK3 DRAM/GPU/VPU 950mV */ + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x1C); + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS1, 0x1C); + /* set VDD_SNVS_0V8 from default 0.85V to 0.8V */ + pmic_reg_write(dev, PCA9450_LDO2CTRL, 0xC0); + return 0; +} + +void spl_board_init(void) +{ + struct udevice *dev; + int ret; + + puts("Normal Boot\n"); + + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", + &dev); + if (ret < 0) + printf("Failed to find clock node. Check device tree\n"); +} + +void board_init_f(ulong dummy) +{ + int ret; + + arch_cpu_init(); + + init_uart_clk(2); + + timer_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + preloader_console_init(); + + enable_tzc380(); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); + + puts("Snowflake: lowlevel init DONE\n"); + board_init_r(NULL, 0); +} diff --git a/configs/snowflake_v2_emmcboot_defconfig b/configs/snowflake_v2_emmcboot_defconfig new file mode 100644 index 0000000000000..4ac54e55c351e --- /dev/null +++ b/configs/snowflake_v2_emmcboot_defconfig @@ -0,0 +1,134 @@ +CONFIG_ARM=y +# CONFIG_ARM64_SUPPORT_AARCH32 is not set +CONFIG_ARCH_IMX8M=y +CONFIG_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-mt-snowflake-v2" +CONFIG_SPL_TEXT_BASE=0x7E1000 +CONFIG_TARGET_MT_SNOWFLAKE_V2=y +CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_STACK=0x91fff0 +CONFIG_SPL=y +CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y +CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_SYS_BOOT_GET_CMDLINE=y +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x500000 +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTCOMMAND="ext4load mmc 0:1 0x60480000 boot/leic-kernel.fit; setenv bootargs console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200 root=/dev/mmcblk0p1 rootwait rw; bootm 0x60480000" +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x2C0 +CONFIG_SPL_DMA=y +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=276 +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="snowflake-v2" +CONFIG_SPL_DM=y +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_IMX8MM=y +CONFIG_CLK_IMX8MM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x60480000 +CONFIG_FASTBOOT_BUF_SIZE=0x7300000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y +# CONFIG_MMC_VERBOSE is not set +CONFIG_MMC_SDHCI=y +CONFIG_SPL_MMC_SDHCI_ADMA=y +CONFIG_FSL_USDHC=y +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PCA9450=y +CONFIG_SPL_DM_PMIC_PCA9450=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_MX7 is not set +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_SDP_LOADADDR=0x50000000 +CONFIG_IMX_WATCHDOG=y +# CONFIG_SPL_SHA1 is not set +# CONFIG_SPL_SHA256 is not set diff --git a/include/configs/snowflake_v2.h b/include/configs/snowflake_v2.h new file mode 100644 index 0000000000000..a2aa016f13d91 --- /dev/null +++ b/include/configs/snowflake_v2.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Kontron Electronics GmbH + * Copyright (C) 2020 Mettler Toledo GmbH + * + * Configuration settings for the MT Snowflake v2 Terminal, based on Kontron + * "Kontron SL i.MX8M Mini" SoM. + */ +#ifndef __SNOWFLAKE_V2_IMX8M_MINI_H +#define __SNOWFLAKE_V2_IMX8M_MINI_H + +#ifdef CONFIG_SPL_BUILD +#include <config.h> +#endif + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> +#include <asm/mach-imx/gpio.h> + +/* + * ####################################### + * ### RAM ### + * ####################################### + */ + +#define PHYS_SDRAM DDR_CSD1_BASE_ADDR +#define PHYS_SDRAM_SIZE (SZ_1G) +#define CFG_SYS_SDRAM_BASE PHYS_SDRAM + +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 + +/* + * ####################################### + * ### USB ### + * ####################################### + */ +#ifdef CONFIG_USB_EHCI_HCD +#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CFG_MXC_USB_FLAGS 0 +#endif + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) +#include <config_distro_bootcmd.h> +/* Do not try to probe USB net adapters for net boot */ +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" + +#ifdef CONFIG_SPL_BUILD +#define CFG_MALLOC_F_ADDR 0x930000 +#endif + +#endif /* __SNOWFLAKE_V2_IMX8M_MINI_H */ -- 2.40.1

3 2