July 2023 - U-Boot

[PATCH 1/4] rockchip: rk3308: fix board_debug_uart_init
by Pegorer Massimo 15 Jul '23

15 Jul '23

Definition of function board_debug_uart_init() must be under CONFIG_DEBUG_UART_BOARD_INIT and not under CONFIG_DEBUG_UART, as it was: see debug_uart.h. In this way the debug uart can be used but its board-specific initialization skipped by configuration, if useless. Signed-off-by: Massimo Pegorer <massimo.pegorer(a)vimar.com> --- arch/arm/mach-rockchip/rk3308/rk3308.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c b/arch/arm/mach-rockchip/rk3308/rk3308.c index dd9109b7c3..5763604dc3 100644 --- a/arch/arm/mach-rockchip/rk3308/rk3308.c +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c @@ -174,7 +174,7 @@ int rk_board_init(void) return 0; } -#if defined(CONFIG_DEBUG_UART) +#ifdef CONFIG_DEBUG_UART_BOARD_INIT __weak void board_debug_uart_init(void) { static struct rk3308_grf * const grf = (void *)GRF_BASE; -- 2.34.1

1 0

[PATCH 0/4] rockchip: rk3308: improve support for ROCK Pi S
by Pegorer Massimo 15 Jul '23

15 Jul '23

Some ROCK Pi S SKU/models are not equipped with SD-NAND (eMMC): add support for SPL to access sdmmc to boot. Also fix debug uart init, which broke sdmmc access due to pimux conflict, and boot devices definitions in DTS causing 'same-as-spl' feature not to work. Massimo Pegorer (4): rockchip: rk3308: fix board_debug_uart_init rockchip: rk3308: no DEBUG_UART_BOARD_INIT for ROCK Pi S rockchip: rk3308: add support for sdmmc boot rockchip: rk3308: fix same-as-spl boot order arch/arm/dts/Makefile | 3 ++- arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi | 2 +- arch/arm/dts/rk3308-u-boot.dtsi | 5 +++++ arch/arm/dts/rk3308.dtsi | 6 +++--- arch/arm/mach-rockchip/Kconfig | 1 - arch/arm/mach-rockchip/rk3308/rk3308.c | 2 +- configs/rock-pi-s-rk3308_defconfig | 1 + 7 files changed, 13 insertions(+), 7 deletions(-) -- 2.34.1

1 0

[PATCH v2 0/9] rockchip: Fix PCIe and NVMe support on RK3568
by Jonas Karlman 15 Jul '23

15 Jul '23

This series fixes and enables PCIe and NVMe support on RK3568. Patch 1 adds a dev_read_addr_size_index_ptr function. Patch 2-3 fixes main issue in the driver to be usable on RK3568. Patch 4 fixes a long wait time during probe when no device is attached. Patch 5 hides BARs of the root complex that could claim the entire memory region during PCI autoconfig. Patch 6 adds support for the gpios prop to the fixed regulators driver. Patch 7 adds a missing clock to the clock driver. Patch 8 enables PCIe and NVMe support on rk3568-rock-3a. Patch 9 updates the device tree with new reg and ranges values. For a clean apply of patch 8, the series at [1] may be needed. I have tested that a Samsung 970 EVO NVMe is detected on a ROCK 3A, BusDevFun VendorId DeviceId Device Class Sub-Class 00.00.00 0x1d87 0x3566 Bridge device 0x04 01.00.00 0x144d 0xa808 Mass storage controller 0x08 and I have also verified that the network controller continues to be detected on a ROCK 5B. BusDevFun VendorId DeviceId Device Class Sub-Class 00.00.00 0x1d87 0x3588 Bridge device 0x04 01.00.00 0x10ec 0x8125 Network controller 0x00 Changes in v2: - Rebased on custodians/u-boot-rockchip master branch and the defconfig and spi v2 series at [1]. - Drop dependency on basic reference counting of gpio regulators series, pcie2x1 is disabled for rk3568-rock-3a to avoid a system freeze due to disable of a shared vpcie3v3-supply regulator while in use by pcie3x2. - Add and use dev_read_addr_size_index_ptr function. - Update commit messages. - Collect r-b tags. This series can also be found at [2]. [1] https://patchwork.ozlabs.org/project/uboot/cover/20230517182624.1765359-1-j… [2] https://github.com/Kwiboo/u-boot-rockchip/commits/rk3568-pcie-v2 Jonas Karlman (9): core: read: add dev_read_addr_size_index_ptr function pci: pcie_dw_rockchip: Get config region from reg prop pci: pcie_dw_rockchip: Use regulator_set_enable_if_allowed pci: pcie_dw_rockchip: Speed up link probe pci: pcie_dw_rockchip: Hide BARs of the root complex regulator: fixed: Add support for gpios prop rockchip: clk: clk_rk3568: Add CLK_PCIEPHY2_REF support rockchip: rk3568-rock-3a: Enable PCIe and NVMe support rockchip: rk356x: Update PCIe config, IO and memory regions arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 16 ++++ arch/arm/dts/rk3568.dtsi | 14 +-- arch/arm/dts/rk356x.dtsi | 7 +- configs/rock-3a-rk3568_defconfig | 4 + drivers/clk/rockchip/clk_rk3568.c | 1 + drivers/core/read.c | 11 +++ drivers/pci/pcie_dw_common.c | 10 +- drivers/pci/pcie_dw_rockchip.c | 120 +++++++++++++++--------- drivers/power/regulator/fixed.c | 5 +- include/dm/read.h | 21 +++++ 10 files changed, 153 insertions(+), 56 deletions(-) -- 2.40.1

2 15

[PATCH v2 0/3] board: rockchip: Add Hardkernel ODROID-M1
by Jonas Karlman 15 Jul '23

15 Jul '23

This series add support for Hardkernel ODROID-M1, a single board computer with a RK3568B2 SoC. First patch fixes a build issue in the dwc_ahci driver. Second patch fixes a build warning in the ini command. Third patch import the device tree from linux v6.4 and add a defconfig for Hardkernel ODROID-M1. Following was tested on a ODROID-M1 8GB v1.0 2022-06-13: - SD-card boot - eMMC boot - SPI Flash boot - PCIe/NVMe/AHCI - SATA port - USB host Changes in v2: - Add new patch to fix build warning in the ini command - Enable CMD_MTD, CMD_INI and CMD_CRAMFS to closer match downstream legacy U-Boot - Do not override spi0 alias, use SF_DEFAULT_BUS=4 - Collect r-b and t-b tags With the new options added in v2 it is possible to load downstream petitboot from SD-card using following commands: load mmc 1:1 $fdt_addr_r rk3568-odroid-m1.dtb load mmc 1:1 $cramfsaddr ODROIDBIOS.BIN cramfsload $scriptaddr boot.scr source $scriptaddr This series have loose dependencies on the following series: - rockchip: Fix PCIe and NVMe support on RK3568 [1] - rockchip: rk3568: Use dwc3-generic driver [2] - rockchip: rk3568: Fix alloc space exhausted in SPL [3] - rockchip: rk3568: Device Tree updates [4] - rockchip: rk35xx: Fix SPI Flash alias [5] [1] https://patchwork.ozlabs.org/project/uboot/list/?series=355486 [2] https://patchwork.ozlabs.org/project/uboot/list/?series=357200 [3] https://patchwork.ozlabs.org/project/uboot/list/?series=361999 [4] https://patchwork.ozlabs.org/project/uboot/list/?series=362030 [5] https://patchwork.ozlabs.org/project/uboot/list/?series=363527 Jonas Karlman (3): ata: dwc_ahci: Fix support for other platforms cmd: ini: Fix build warning board: rockchip: Add Hardkernel ODROID-M1 arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi | 42 ++ arch/arm/dts/rk3568-odroid-m1.dts | 744 ++++++++++++++++++++++ arch/arm/mach-rockchip/rk3568/Kconfig | 6 + board/hardkernel/odroid_m1/Kconfig | 15 + board/hardkernel/odroid_m1/MAINTAINERS | 8 + board/hardkernel/odroid_m1/Makefile | 3 + board/hardkernel/odroid_m1/odroid_m1.c | 1 + cmd/ini.c | 2 +- configs/odroid-m1-rk3568_defconfig | 113 ++++ doc/board/rockchip/rockchip.rst | 1 + drivers/ata/dwc_ahci.c | 4 + include/configs/odroid_m1.h | 11 + 13 files changed, 950 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi create mode 100644 arch/arm/dts/rk3568-odroid-m1.dts create mode 100644 board/hardkernel/odroid_m1/Kconfig create mode 100644 board/hardkernel/odroid_m1/MAINTAINERS create mode 100644 board/hardkernel/odroid_m1/Makefile create mode 100644 board/hardkernel/odroid_m1/odroid_m1.c create mode 100644 configs/odroid-m1-rk3568_defconfig create mode 100644 include/configs/odroid_m1.h -- 2.41.0

1 4

[PATCH] common: Kconfig: Fix CMD_BMP/BMP dependency
by Samuel Dionne-Riel 15 Jul '23

15 Jul '23

Using `default y` will not select BMP when CMD_BMP has been enabled, if it was already configured. By using `select`, if `CMD_BMP` is turned on, it will force the presence of `BMP`. Fixes: 072b0e16c482114d242580dd7a3197db5966705f Signed-off-by: Samuel Dionne-Riel <samuel(a)dionne-riel.com> --- cmd/Kconfig | 1 + common/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/cmd/Kconfig b/cmd/Kconfig index 02e54f1e50..94c54b2359 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1988,6 +1988,7 @@ config CMD_2048 config CMD_BMP bool "Enable 'bmp' command" depends on VIDEO + select BMP help This provides a way to obtain information about a BMP-format image and to display it. BMP (which presumably stands for BitMaP) is a diff --git a/common/Kconfig b/common/Kconfig index bbabadb35e..d0117e3dc8 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1157,7 +1157,7 @@ config IO_TRACE config BMP bool "Enable bmp image display" - default y if CMD_BMP + default n help Enable bmp functions to display bmp image and get bmp info. -- 2.41.0

3 3

[PATCH v2] bdinfo: Correct use of assertions
by Simon Glass 14 Jul '23

14 Jul '23

This test was written for the incorrect use of assertions. Update it to build with the previous approach, where tests fail at the first assertion. All assertion functions return 0 on success and non-zero on failure. They can be nested into functions simply by declaring a function that returns an int and using ut_assertok() to call it. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: - Expand the commit message to be clearer test/cmd/bdinfo.c | 79 +++++++++++++++++++++++++++++------------------ 1 file changed, 49 insertions(+), 30 deletions(-) diff --git a/test/cmd/bdinfo.c b/test/cmd/bdinfo.c index 9068df79c4f2..cddf1a46d491 100644 --- a/test/cmd/bdinfo.c +++ b/test/cmd/bdinfo.c @@ -27,19 +27,25 @@ DECLARE_GLOBAL_DATA_PTR; /* Declare a new bdinfo test */ #define BDINFO_TEST(_name, _flags) UNIT_TEST(_name, _flags, bdinfo_test) -static void bdinfo_test_num_l(struct unit_test_state *uts, - const char *name, ulong value) +static int test_num_l(struct unit_test_state *uts, const char *name, + ulong value) { - ut_assert_nextline("%-12s= 0x%0*lx", name, 2 * (int)sizeof(value), value); + ut_assert_nextline("%-12s= 0x%0*lx", name, 2 * (int)sizeof(value), + value); + + return 0; } -static void bdinfo_test_num_ll(struct unit_test_state *uts, - const char *name, unsigned long long value) +static int test_num_ll(struct unit_test_state *uts, const char *name, + unsigned long long value) { - ut_assert_nextline("%-12s= 0x%.*llx", name, 2 * (int)sizeof(ulong), value); + ut_assert_nextline("%-12s= 0x%.*llx", name, 2 * (int)sizeof(ulong), + value); + + return 0; } -static void test_eth(struct unit_test_state *uts) +static int test_eth(struct unit_test_state *uts) { const int idx = eth_get_dev_index(); uchar enetaddr[6]; @@ -59,9 +65,11 @@ static void test_eth(struct unit_test_state *uts) else ut_assert_nextline("%-12s= %pM", name, enetaddr); ut_assert_nextline("IP addr = %s", env_get("ipaddr")); + + return 0; } -static void test_video_info(struct unit_test_state *uts) +static int test_video_info(struct unit_test_state *uts) { const struct udevice *dev; struct uclass *uc; @@ -73,22 +81,25 @@ static void test_video_info(struct unit_test_state *uts) struct video_priv *upriv = dev_get_uclass_priv(dev); struct video_uc_plat *plat = dev_get_uclass_plat(dev); - bdinfo_test_num_ll(uts, "FB base", (ulong)upriv->fb); + ut_assertok(test_num_ll(uts, "FB base", + (ulong)upriv->fb)); if (upriv->copy_fb) { - bdinfo_test_num_ll(uts, "FB copy", - (ulong)upriv->copy_fb); - bdinfo_test_num_l(uts, " copy size", - plat->copy_size); + ut_assertok(test_num_ll(uts, "FB copy", + (ulong)upriv->copy_fb)); + ut_assertok(test_num_l(uts, " copy size", + plat->copy_size)); } ut_assert_nextline("%-12s= %dx%dx%d", "FB size", upriv->xsize, upriv->ysize, 1 << upriv->bpix); } } + + return 0; } -static void lmb_test_dump_region(struct unit_test_state *uts, - struct lmb_region *rgn, char *name) +static int lmb_test_dump_region(struct unit_test_state *uts, + struct lmb_region *rgn, char *name) { unsigned long long base, size, end; enum lmb_flags flags; @@ -105,13 +116,17 @@ static void lmb_test_dump_region(struct unit_test_state *uts, ut_assert_nextline(" %s[%d]\t[0x%llx-0x%llx], 0x%08llx bytes flags: %x", name, i, base, end, size, flags); } + + return 0; } -static void lmb_test_dump_all(struct unit_test_state *uts, struct lmb *lmb) +static int lmb_test_dump_all(struct unit_test_state *uts, struct lmb *lmb) { ut_assert_nextline("lmb_dump_all:"); lmb_test_dump_region(uts, &lmb->memory, "memory"); lmb_test_dump_region(uts, &lmb->reserved, "reserved"); + + return 0; } static int bdinfo_test_move(struct unit_test_state *uts) @@ -123,44 +138,48 @@ static int bdinfo_test_move(struct unit_test_state *uts) ut_assertok(console_record_reset_enable()); ut_assertok(run_commandf("bdinfo")); - bdinfo_test_num_l(uts, "boot_params", 0); + ut_assertok(test_num_l(uts, "boot_params", 0)); for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) { if (bd->bi_dram[i].size) { - bdinfo_test_num_l(uts, "DRAM bank", i); - bdinfo_test_num_ll(uts, "-> start", bd->bi_dram[i].start); - bdinfo_test_num_ll(uts, "-> size", bd->bi_dram[i].size); + ut_assertok(test_num_l(uts, "DRAM bank", i)); + ut_assertok(test_num_ll(uts, "-> start", + bd->bi_dram[i].start)); + ut_assertok(test_num_ll(uts, "-> size", + bd->bi_dram[i].size)); } } /* CONFIG_SYS_HAS_SRAM testing not supported */ - bdinfo_test_num_l(uts, "flashstart", 0); - bdinfo_test_num_l(uts, "flashsize", 0); - bdinfo_test_num_l(uts, "flashoffset", 0); + ut_assertok(test_num_l(uts, "flashstart", 0)); + ut_assertok(test_num_l(uts, "flashsize", 0)); + ut_assertok(test_num_l(uts, "flashoffset", 0)); ut_assert_nextline("baudrate = %lu bps", env_get_ulong("baudrate", 10, 1234)); - bdinfo_test_num_l(uts, "relocaddr", gd->relocaddr); - bdinfo_test_num_l(uts, "reloc off", gd->reloc_off); + ut_assertok(test_num_l(uts, "relocaddr", gd->relocaddr)); + ut_assertok(test_num_l(uts, "reloc off", gd->reloc_off)); ut_assert_nextline("%-12s= %u-bit", "Build", (uint)sizeof(void *) * 8); if (IS_ENABLED(CONFIG_CMD_NET)) - test_eth(uts); + ut_assertok(test_eth(uts)); /* * Make sure environment variable "fdtcontroladdr" address * matches mapped control DT address. */ ut_assert(map_to_sysmem(gd->fdt_blob) == env_get_hex("fdtcontroladdr", 0x1234)); - bdinfo_test_num_l(uts, "fdt_blob", (ulong)map_to_sysmem(gd->fdt_blob)); - bdinfo_test_num_l(uts, "new_fdt", (ulong)map_to_sysmem(gd->new_fdt)); - bdinfo_test_num_l(uts, "fdt_size", (ulong)gd->fdt_size); + ut_assertok(test_num_l(uts, "fdt_blob", + (ulong)map_to_sysmem(gd->fdt_blob))); + ut_assertok(test_num_l(uts, "new_fdt", + (ulong)map_to_sysmem(gd->new_fdt))); + ut_assertok(test_num_l(uts, "fdt_size", (ulong)gd->fdt_size)); if (IS_ENABLED(CONFIG_VIDEO)) test_video_info(uts); /* The gd->multi_dtb_fit may not be available, hence, #if below. */ #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) - bdinfo_test_num_l(uts, "multi_dtb_fit", (ulong)gd->multi_dtb_fit); + ut_assertok(test_num_l(uts, "multi_dtb_fit", (ulong)gd->multi_dtb_fit)); #endif if (IS_ENABLED(CONFIG_LMB) && gd->fdt_blob) { -- 2.41.0.390.g38632f3daf-goog

3 2

[PATCH 00/40] expo: Add an initial configuration editor
by Simon Glass 14 Jul '23

14 Jul '23

This series provides a means to edit board configuration in U-Boot in a graphical manner. It supports multiple menu items and allows moving between them and selecting items. The configuration is defined in a data format so that code is not needed in most cases. This allows the board configuration to be provided in the devicetree. This is still at an early stage, since it only supports menus. Numeric values are not supported. Most importantly it does not yet support loading or saving the configuration selected by the user. To try it out you can use something like: ./tools/expo.py -e test/boot/files/expo_layout.dts \ -l test/boot/files/expo_layout.dts -o cedit.dtb ./u-boot -Tl -c "cedit load hostfs - cedit.dtb; cedit run" Use the arrow keys to move between menus, enter to open a menu, escape to exit. Various minor fixes and improvements are provided in this series: - Update STB TrueType library to latest - Support clearing part of the video display - Support multiple livetrees loaded at runtime - Support loading and allocating a file - Support proper measuring of text in expo - Support simple themes for expo This series is available at u-boot-dm/cedit-working Simon Glass (40): binman: Correct coverage gap in control expo: Correct some header-file comments expo: Convert to using a string ID for the scene title sandbox: Fix quiting when the LCD window is closed test: Restore test behaviour on failure gpio: Avoid using an invalid ofnode dm: core: Avoid registering an inaccessible tree video: Drop #ifdefs from console_truetype video: Provide a way to clear part of the console expo: Store the console in the expo expo: Avoid automatically arranging the scene console: Correct truetype spacing error expo: Rename exp_set_text_mode() fs: Create functions to load and allocate a file cat: Update command to use fs_load_alloc() fdt: Align the start of the livetree fdt: Clarify the fdt pre-relocation warning fdt: Allow more general use of livetree bootstd: Add a separate log category for expo video: Correct docs for video_index_to_colour() video: Allow temporary colour changes console: Allow measuring the bounding box of text expo: Allow setting the start of the dynamic-ID range video: Use enum with video_index_to_colour() expo: Add width and height to objects expo: Use flags for objects expo: Calculate text bounding-box correctly expo: Set up the width and height of objects expo: Support simple themes expo: Move menu-item selection into a function expo: Support drawing of popup menus expo: Rename EXPOACT_POINT to EXPOACT_POINT_ITEM expo: Draw popup menus in both opened and closed states expo: Draw the current opened menu on top expo: Implement the keypress logic for popup menus expo: Add spacing around menus and items expo: Support building an expo from a description file expo: Add a configuration editor expo: Add tests for the configuration editor RFC: video: Update stb_truetype arch/sandbox/cpu/sdl.c | 3 +- arch/sandbox/dts/cedit.dtsi | 64 + arch/sandbox/dts/sandbox.dtsi | 6 + arch/sandbox/dts/test.dts | 13 + boot/Kconfig | 14 + boot/Makefile | 3 +- boot/bootflow_menu.c | 6 +- boot/bootmeth-uclass.c | 30 +- boot/cedit.c | 163 +++ boot/expo.c | 102 +- boot/expo_build.c | 401 +++++ boot/scene.c | 361 ++++- boot/scene_internal.h | 84 +- boot/scene_menu.c | 290 +++- cmd/Kconfig | 9 + cmd/Makefile | 1 + cmd/cat.c | 47 +- cmd/cedit.c | 93 ++ common/log.c | 1 + configs/sandbox_defconfig | 1 + doc/develop/expo.rst | 305 +++- doc/usage/cmd/cedit.rst | 31 + doc/usage/index.rst | 1 + drivers/core/ofnode.c | 27 +- drivers/gpio/gpio-uclass.c | 2 +- drivers/video/console_truetype.c | 259 ++-- drivers/video/stb_truetype.h | 2257 ++++++++++++++++++++++++++--- drivers/video/vidconsole-uclass.c | 42 + drivers/video/video-uclass.c | 54 +- fs/fs.c | 58 + include/dm/of.h | 2 + include/dm/ofnode.h | 10 + include/expo.h | 209 ++- include/fs.h | 38 + include/log.h | 2 + include/of_live.h | 10 + include/test/cedit-test.h | 29 + include/test/ut.h | 36 +- include/video.h | 22 +- include/video_console.h | 78 + lib/of_live.c | 11 +- test/boot/expo.c | 241 ++- test/boot/files/expo_layout.dts | 84 ++ test/dm/ofnode.c | 45 + test/dm/video.c | 6 +- test/py/tests/test_ut.py | 10 + tools/binman/control.py | 2 +- tools/expo.py | 130 ++ 48 files changed, 5110 insertions(+), 583 deletions(-) create mode 100644 arch/sandbox/dts/cedit.dtsi create mode 100644 boot/cedit.c create mode 100644 boot/expo_build.c create mode 100644 cmd/cedit.c create mode 100644 doc/usage/cmd/cedit.rst create mode 100644 include/test/cedit-test.h create mode 100644 test/boot/files/expo_layout.dts create mode 100755 tools/expo.py -- 2.41.0.rc0.172.g3f132b7071-goog

3 42

Pull request: u-boot-spi/master
by Jagan Teki 14 Jul '23

14 Jul '23

Hi Tom, Please pull this PR. Summary: - Add xtxtech spi-nor chip parts (Bruce Suen) - Add bcm63xx-hsspi driver fixes (William Zhang) CI: https://source.denx.de/u-boot/custodians/u-boot-spi/-/pipelines/16886 thanks! Jagan. The following changes since commit bf5152d0108683bbaabf9d7a7988f61649fc33f4: Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv (2023-07-12 13:10:04 -0400) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-spi master for you to fetch changes up to 4a31e145217cecc3d421f96eafcd2cfd9c670929: mtd: spi-nor: Add support for w25q256jwm (2023-07-13 14:17:40 +0530) ---------------------------------------------------------------- Bruce Suen (2): mtd: spi-nor-ids: change full company name of XTX mtd: spi-nor-ids: add xtxtech part# Fabio Estevam (2): spi: soft_spi: Support the recommended soft spi properties doc: bindings: soft-spi: Remove the usage of deprecated properties Jim Liu (1): spi: npcm_pspi: use ACTIVE_LOW flag for cs gpio and set default max_hz Lukas Funke (2): spi: pl022: Align compatible property with device tree binding spi: pl022: Add chip-select gpio support Masahisa Kojima (1): spi: synquacer: remove SPI_TX_BYTE handling Stefan Herbrechtsmeier (2): spi: pl022: Rename flush into pl022_spi_flush spi: pl022: Remove platform data header Venkatesh Yadav Abbarapu (1): mtd: spi-nor: Add support for w25q256jwm William Zhang (6): spi: bcm63xx-hsspi: Make driver depend on BCMBCA arch spi: bcm63xx-hsspi: Fix multi-bit mode setting spi: bcm63xx-hsspi: Add new compatible string support spi: bcm63xx-hsspi: Add prepend mode support spi: bcmbca-hsspi: Add driver for newer HSSPI controller dt-bindings: spi: Add bcm63xx-hsspi controller support .../spi/brcm,bcm63xx-hsspi.yaml | 134 +++++++ doc/device-tree-bindings/spi/soft-spi.txt | 12 +- drivers/mtd/spi/spi-nor-ids.c | 43 ++- drivers/spi/Kconfig | 13 +- drivers/spi/Makefile | 1 + drivers/spi/bcm63xx_hsspi.c | 277 ++++++++++++-- drivers/spi/bcmbca_hsspi.c | 414 +++++++++++++++++++++ drivers/spi/npcm_pspi.c | 12 +- drivers/spi/pl022_spi.c | 51 ++- drivers/spi/soft_spi.c | 21 +- drivers/spi/spi-synquacer.c | 8 +- include/dm/platform_data/spi_pl022.h | 21 -- 12 files changed, 932 insertions(+), 75 deletions(-) create mode 100644 doc/device-tree-bindings/spi/brcm,bcm63xx-hsspi.yaml create mode 100644 drivers/spi/bcmbca_hsspi.c delete mode 100644 include/dm/platform_data/spi_pl022.h

2 1

Please pull u-boot-marvell/master
by Stefan Roese 14 Jul '23

14 Jul '23

Hi Tom, please pull the following Marvell MVEBU related patches into master: ---------------------------------------------------------------- - mvebu: Thecus: Misc enhancement and cleanup (Tony) - mvebu: Add AC5X Allied Telesis x240 board support incl NAND controller enhancements for this SoC (Chris) ---------------------------------------------------------------- Here the Azure build, without any issues: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=305&view=results Thanks, Stefan The following changes since commit bf5152d0108683bbaabf9d7a7988f61649fc33f4: Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv (2023-07-12 13:10:04 -0400) are available in the Git repository at: git@source.denx.de:u-boot/custodians/u-boot-marvell.git for you to fetch changes up to 366a863e651edfe976d28995888721e9bd403366: arm: mvebu: Remove unused alias from RC AC5X dts (2023-07-13 15:54:11 +0200) ---------------------------------------------------------------- Chris Packham (6): arm: mvebu: ac5: Add nand-controller node arm: mvebu: ac5: Define mvebu_get_nand_clock() mtd: nand: pxa3xx: Add support for the Marvell AC5 SoC mtd: nand: pxa3xx: Enable devbus/nand arbiter on Armada 8K arm: mvebu: Add Allied Telesis x240 board arm: mvebu: Remove unused alias from RC AC5X dts Tony Dinh (2): arm: mvebu: Clean up Thecus N2350 board DTS arm: mvebu: Enable gpio-fan for Thecus N2350 board arch/arm/dts/Makefile | 3 +- arch/arm/dts/ac5-98dx25xx.dtsi | 9 ++ arch/arm/dts/ac5-98dx35xx-atl-x240.dts | 212 +++++++++++++++++++++++++++++ arch/arm/dts/ac5-98dx35xx-rd.dts | 1 - arch/arm/dts/armada-385-thecus-n2350.dts | 223 ++++++++++++++++--------------- arch/arm/mach-mvebu/Kconfig | 7 + arch/arm/mach-mvebu/alleycat5/soc.c | 6 + board/alliedtelesis/x240/MAINTAINERS | 7 + board/alliedtelesis/x240/Makefile | 6 + board/alliedtelesis/x240/x240.c | 13 ++ board/thecus/n2350/n2350.c | 2 +- configs/x240_defconfig | 86 ++++++++++++ drivers/mtd/nand/raw/pxa3xx_nand.c | 20 ++- include/configs/x240.h | 37 +++++ 14 files changed, 514 insertions(+), 118 deletions(-) create mode 100644 arch/arm/dts/ac5-98dx35xx-atl-x240.dts create mode 100644 board/alliedtelesis/x240/MAINTAINERS create mode 100644 board/alliedtelesis/x240/Makefile create mode 100644 board/alliedtelesis/x240/x240.c create mode 100644 configs/x240_defconfig create mode 100644 include/configs/x240.h

2 1

Pull request: please pull u-boot-imx-20230713
by Stefano Babic 14 Jul '23

14 Jul '23

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 146a82c017d51eb2c3b8be33854f200f1e52a1cb: Merge branch 'next' (2023-07-10 14:29:14 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-20230713 for you to fetch changes up to cdbef023e2538da12b3ca4a2b8a5b7bd1c3ada02: mx7dsabresd: Retrieve the second MAC address from fuses (2023-07-13 11:58:18 +0200) ---------------------------------------------------------------- u-boot-imx-20230713 ------------------- Merge for 2023.10. CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888 ---------------------------------------------------------------- Adam Ford (11): imx: imx8mm-beacon: Enable FlexSPI in U-Boot configs: imx: imx8mm_beacon: Add config option for QSPI booting imx: imx8mm-beacon: Move environment definition to env file imx8m: imx8mm-beacon: Migrate README to rst imx: imx8mn-beacon: Move environment definition to env file imx8m: imx8mn-beacon: Migrate README to rst imx8m: beacon: Update MAINTAINER file to include beacon rst files clk: imx8mp: Update clocks based on kernel 6.4-RC4 arm: dts: imx8mp: Sync the DT with kernel 6.4-rc4 arm: dts: imx8mp-beacon-kit: Enable USB Power domains arm64: imx: imx8mp-beacon: Enable LTO Andrejs Cainikovs (6): colibri-imx8x: print firmware versions board: colibri-imx8x: initialize snvs configs: verdin-imx8mm: enable spl_gpio_hog arm64: dts: verdin-imx8mm: add ctrl_sleep_moci# hog configs: verdin-imx8mp: enable spl_gpio_hog arm64: dts: verdin-imx8mp: add ctrl_sleep_moci# hog Cem Tenruh (1): board: phytec: phycore_imx8mm: Update lpddr4_timing Clement Faure (1): imx: cmd_dek: add ELE DEK Blob generation support Emanuele Ghidoli (1): toradex: tdx-cfg-block: add 0070 verdin i.mx 8m plus quad sku Fabio Estevam (5): power: imx8m-power-domain: Add delay to align with kernel driver mx28evk: Convert to CONFIG_DM_SERIAL mx23evk: Convert to CONFIG_DM_SERIAL mx23_olinuxino: Convert to CONFIG_DM_SERIAL mx7dsabresd: Retrieve the second MAC address from fuses Gaurav Jain (1): imx: imx8: ahab: sha256: enable image verification using ARMv8 crypto extension Giulio Benetti (1): arm: mx6: module_fuse: fix build failure due to wrong argument name Hugo Villeneuve (5): imx8mn-var-som: read and print SoM infos from eeprom on startup imx8mn-var-som: fix non-applied PHY reset-gpios properties arm: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay imx8mn-var-som: read eth MAC address from EEPROM imx8mn-var-som: adjust PHY reset gpios according to hardware configuration Luca Ellero (2): dm: adc: add iMX93 ADC support imx93_evk: defconfig: add adc support Lukasz Majewski (23): arm: mxs: Provide Kconfig option to to not use VDD5V as IMX28 PMU source arm: mxs: Provide Kconfig option to disable battery charging at IMX28 PMU arm: mxs: Provide Kconfig option to not enable 4P2 regulator in IMX28 PMU arm: mxs: Add function to dump PMU registers arm: config: Adjust imx287 based XEA board PMU configuration dts: xea: Delete not used in u-boot DTS nodes dts: xea: Provide missing FEC required properties (mac0 and reg_fec_3v3) defconfig: xea: Change default spi-nor memory bus to 2 spl: xea: Provide stub DM driver for imx28 clocks dts: xea: Enable debug UART support in XEA's SPL (DM_SERIAL) dts: xea: Add u-boot specific 'type' property to duart dts: xea: Remove clocks property from debug UART on XEA dts: xea: Disable 'clks' node for xea (imx287) serial: pl01x: Change OF_CONTROL to OF_REAL serial: pl01x: Prepare the driver to support SPL_OF_PLATDATA serial: pl01x: Modify pending callback to test if transmit FIFO is empty arm: mxs: Prevent serial console init when in very early SPL boot code arm: xea: Call spl_early_init() before DM serial console is enabled in SPL arm: Kconfig: Switch XEA (imx287 based) board to use CONFIG_PL01X_SERIAL config: xea: Enable DM_SERIAL for the XEA (imx287 based) board config: xea: Enable DM_SERIAL for the XEA - single binary (SB) u-boot config: xea: Disable support for boot methods EXTLINUX and VBE config: xea: Disable support for FAT file system Marcel Ziswiler (1): verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux Marek Vasut (2): ARM: imx: romapi: Fix signed integer bitwise ops misuse ARM: dts: imx: Fix eMMC boot on Data Modul i.MX8M Plus eDM SBC Maximus Sun (1): imx: priblob: Update to use structure Nitin Garg (1): imx: parse-container: Use malloc for container processing Oleksandr Suvorov (1): ARM: imx9: support env in fat and ext4 Peng Fan (17): imx: mach: correct SCU API usage imx: toradex/apalis-imx8: correct SCU API usage imx: toradex/colibri-imx8x: correct SCU API usage imx: siemens/capricorn: correct SCU API usage imx: advantech: correct SCU API usage imx: congatec/cgtqmx8: correct SCU API usage imx: scu_api: update to version 1.16 and add more APIs imx: use generic name ele(EdgeLockSecure Enclave) imx: parse-container: fix build warning imx: ele_ahab: use hextoul imx: ele_api: support program secure fuse and return lifecycle imx: ele_api: add DEK Blob generation imx: imx8ulp: start the ELE RNG at boot imx: iamge-container: support secondary container imx: bootaux: change names of MACROs used to boot MCU on iMX devices imx: imx8m: clock: not configure reserved SRC register imx: imx8m: add CAAM_BASE_ADDR Rasmus Villemoes (1): imx8m: soc.c: demote some printfs to debug Sergio Prado (1): configs: verdin-imx8mp: enable ARCH_MISC_INIT Stefan Eichenberger (1): colibri_imx6: fix RALAT and WALAT values Teresa Remmet (2): configs: phycore-imx8mp_defconfig: Enable LTO configs: phycore-imx8mm_defconfig: Enable LTO Tim Harvey (13): board: gateworks: venice: add GPIO name lookup board: gateworks: venice: add eraseenv command board: gateworks: venice: dynamically determine U-Boot raw sector board: gateworks: venice: dynamically determine U-Boot env partition board: gateworks: venice: dynamically update the update_firmware script board: gateworks: venice: move env location board: gateworks: venice: update board doc to show other emmc parts board: gateworks: venice: assume emmc device for USB boot board: gateworks: venice: display dram speed board: gateworks: venice: add imx8mp-gw7905-2x support mx8m: csf.sh: use vars for keys to avoid file edits when signing board: gateworks: venice: switch to 2-bank dram config configs: imx8m: Prepare imx8m-venice boards for HAB support Utkarsh Gupta (1): imx: fsl_sec: preprocessor casting issue with addresses involving math Yannic Moog (2): doc: board: phytec: add phycore_imx8mm doc: board: phytec: add phycore_imx8mp Ye Li (8): imx: cmd_dek: Fix Uninitialized pointer read imx: misc: ele_mu: Update MU TR registers count imx: misc: ele_mu: Update ELE MU driver imx: hab: Fix coverity issue in HAB event decoding imx: image-container: Fix container header checking imx: bootaux: Fix bootaux issue when running on ARM64 imx: imx8: bootaux: Add i.MX8 M4 boot support imx: ahab: Update AHAB for iMX8 and iMX8ULP arch/arm/Kconfig | 6 +- arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 6 +- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 38 ++++- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx28-xea-u-boot.dtsi | 45 ++++++ arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4 + arch/arm/dts/imx8mm-mx8menlo.dts | 17 ++- arch/arm/dts/imx8mm-verdin-dahlia.dtsi | 150 ------------------- arch/arm/dts/imx8mm-verdin-dev.dtsi | 97 +++++++++++- arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi | 8 + arch/arm/dts/imx8mm-verdin.dtsi | 30 ++-- arch/arm/dts/imx8mn-var-som-symphony-u-boot.dtsi | 17 +++ arch/arm/dts/imx8mn-var-som-symphony.dts | 4 - arch/arm/dts/imx8mn-var-som.dtsi | 18 ++- arch/arm/dts/imx8mp-beacon-kit-u-boot.dtsi | 2 - arch/arm/dts/imx8mp-u-boot.dtsi | 3 + arch/arm/dts/imx8mp-venice-gw702x-u-boot.dtsi | 12 ++ arch/arm/dts/imx8mp-venice-gw702x.dtsi | 587 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mp-venice-gw7905-2x-u-boot.dtsi | 51 +++++++ arch/arm/dts/imx8mp-venice-gw7905-2x.dts | 28 ++++ arch/arm/dts/imx8mp-venice-gw7905.dtsi | 309 +++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8mp-verdin-dahlia.dtsi | 129 ---------------- arch/arm/dts/imx8mp-verdin-dev.dtsi | 125 +++++++++++++++- arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi | 8 + arch/arm/dts/imx8mp-verdin-wifi.dtsi | 5 + arch/arm/dts/imx8mp-verdin.dtsi | 91 ++++++++---- arch/arm/dts/imx8mp.dtsi | 502 +++++++++++++++++++++++++++++++++++++++++++++++--------------- arch/arm/include/asm/arch-imx8m/imx-regs.h | 3 +- arch/arm/include/asm/arch-imx9/ccm_regs.h | 2 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx7/imx-regs.h | 2 +- arch/arm/include/asm/global_data.h | 4 +- arch/arm/include/asm/mach-imx/ahab.h | 15 ++ arch/arm/include/asm/mach-imx/{s400_api.h => ele_api.h} | 53 ++++--- arch/arm/include/asm/mach-imx/sys_proto.h | 1 + arch/arm/mach-imx/Kconfig | 9 +- arch/arm/mach-imx/Makefile | 5 + arch/arm/mach-imx/cmd_dek.c | 89 ++++++++++- arch/arm/mach-imx/ele_ahab.c | 91 ++++++++++-- arch/arm/mach-imx/hab.c | 41 +++--- arch/arm/mach-imx/image-container.c | 96 +++++++++++- arch/arm/mach-imx/imx8/ahab.c | 161 +++++++++++++------- arch/arm/mach-imx/imx8/cpu.c | 180 ++++++++++++++++++++++- arch/arm/mach-imx/imx8/fdt.c | 2 +- arch/arm/mach-imx/imx8/snvs_security_sc.c | 175 +++++++++++----------- arch/arm/mach-imx/imx8m/Kconfig | 13 ++ arch/arm/mach-imx/imx8m/clock_imx8mm.c | 1 - arch/arm/mach-imx/imx8m/soc.c | 4 +- arch/arm/mach-imx/imx8ulp/Makefile | 1 - arch/arm/mach-imx/imx8ulp/rdc.c | 18 +-- arch/arm/mach-imx/imx8ulp/soc.c | 16 +- arch/arm/mach-imx/imx8ulp/upower/upower_hal.c | 6 +- arch/arm/mach-imx/imx9/clock.c | 8 +- arch/arm/mach-imx/imx9/clock_root.c | 2 +- arch/arm/mach-imx/imx9/imx_bootaux.c | 6 +- arch/arm/mach-imx/imx9/soc.c | 44 +++--- arch/arm/mach-imx/imx9/trdc.c | 14 +- arch/arm/mach-imx/imx_bootaux.c | 45 +++--- arch/arm/mach-imx/mx6/module_fuse.c | 2 +- arch/arm/mach-imx/mxs/Kconfig | 23 +++ arch/arm/mach-imx/parse-container.c | 119 +++++---------- arch/arm/mach-imx/priblob.c | 10 +- arch/arm/mach-imx/spl_imx_romapi.c | 32 ++-- board/advantech/imx8qm_dmsse20_a1/spl.c | 6 +- board/advantech/imx8qm_rom7720_a1/spl.c | 6 +- board/beacon/imx8mm/MAINTAINERS | 1 + board/beacon/imx8mm/README | 37 ----- board/beacon/imx8mm/imx8mm_beacon.env | 19 +++ board/beacon/imx8mm/spl.c | 7 + board/beacon/imx8mn/README | 38 ----- board/beacon/imx8mn/imx8mn_beacon.env | 25 ++++ board/congatec/cgtqmx8/cgtqmx8.c | 8 +- board/data_modul/imx8mp_edm_sbc/spl.c | 14 ++ board/freescale/imx8ulp_evk/spl.c | 20 ++- board/freescale/imx93_evk/spl.c | 1 - board/freescale/mx7dsabresd/mx7dsabresd.c | 6 + board/gateworks/venice/eeprom.c | 5 + board/gateworks/venice/lpddr4_timing.h | 1 + board/gateworks/venice/lpddr4_timing_imx8mp.c | 532 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/gateworks/venice/spl.c | 46 +++++- board/gateworks/venice/venice.c | 89 ++++++++++- board/gateworks/venice/venice.env | 7 +- board/kontron/sl-mx8mm/sl-mx8mm.c | 2 +- board/kontron/sl-mx8mm/spl.c | 2 +- board/liebherr/xea/xea.c | 20 ++- board/phytec/phycore_imx8mm/lpddr4_timing.c | 1486 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------------------------------------------------- board/siemens/capricorn/board.c | 12 +- board/technexion/pico-imx8mq/pico-imx8mq.c | 2 +- board/technexion/pico-imx8mq/spl.c | 2 +- board/toradex/apalis-imx8/apalis-imx8.c | 10 +- board/toradex/colibri-imx8x/colibri-imx8x.c | 20 ++- board/toradex/colibri_imx6/colibri_imx6.c | 6 +- board/toradex/common/tdx-cfg-block.c | 1 + board/toradex/common/tdx-cfg-block.h | 2 + board/toradex/verdin-imx8mm/MAINTAINERS | 1 - board/toradex/verdin-imx8mp/MAINTAINERS | 1 - board/toradex/verdin-imx8mp/verdin-imx8mp.c | 3 +- board/variscite/imx8mn_var_som/imx8mn_var_som.c | 214 +++++++++++++++++++++++++++ configs/imx28_xea_defconfig | 11 +- configs/imx28_xea_sb_defconfig | 2 + configs/imx8mm_beacon_defconfig | 1 + configs/imx8mm_beacon_fspi_defconfig | 155 ++++++++++++++++++++ configs/imx8mm_venice_defconfig | 7 +- configs/imx8mn_beacon_2g_defconfig | 1 + configs/imx8mn_beacon_defconfig | 1 + configs/imx8mn_beacon_fspi_defconfig | 1 + configs/imx8mn_var_som_defconfig | 4 + configs/imx8mn_venice_defconfig | 7 +- configs/imx8mp_beacon_defconfig | 1 + configs/imx8mp_venice_defconfig | 9 +- configs/imx93_11x11_evk_defconfig | 1 + configs/mx23_olinuxino_defconfig | 1 + configs/mx23evk_defconfig | 1 + configs/mx28evk_defconfig | 2 +- configs/phycore-imx8mm_defconfig | 1 + configs/phycore-imx8mp_defconfig | 1 + configs/verdin-imx8mm_defconfig | 1 + configs/verdin-imx8mp_defconfig | 2 + doc/board/beacon/beacon-imx8mm.rst | 55 +++++++ doc/board/beacon/beacon-imx8mn.rst | 53 +++++++ doc/board/beacon/index.rst | 2 + doc/board/gateworks/imx8mm_venice.rst | 4 +- doc/board/gateworks/imx8mn_venice.rst | 4 +- doc/board/gateworks/imx8mp_venice.rst | 4 +- doc/board/index.rst | 1 + doc/board/phytec/index.rst | 10 ++ doc/board/phytec/phycore-imx8mm.rst | 60 ++++++++ doc/board/phytec/phycore-imx8mp.rst | 60 ++++++++ doc/imx/habv4/csf_examples/mx8m/csf.sh | 21 +++ doc/imx/habv4/csf_examples/mx8m/csf_fit.txt | 12 +- doc/imx/habv4/csf_examples/mx8m/csf_spl.txt | 12 +- doc/imx/habv4/guides/mx8m_spl_secure_boot.txt | 10 ++ drivers/adc/Kconfig | 8 + drivers/adc/Makefile | 1 + drivers/adc/imx93-adc.c | 290 ++++++++++++++++++++++++++++++++++++ drivers/clk/imx/clk-imx8mp.c | 3 +- drivers/misc/Kconfig | 4 +- drivers/misc/Makefile | 2 +- drivers/misc/imx8/scu_api.c | 78 ++++++++++ drivers/misc/{sentinel => imx_ele}/Makefile | 2 +- drivers/misc/{sentinel/s400_api.c => imx_ele/ele_api.c} | 333 +++++++++++++++++++++++++++++------------- drivers/misc/{sentinel/s4mu.c => imx_ele/ele_mu.c} | 38 +++-- drivers/misc/{sentinel => imx_ele}/fuse.c | 40 ++--- drivers/power/domain/imx8-power-domain-legacy.c | 9 +- drivers/power/domain/imx8m-power-domain.c | 3 + drivers/serial/serial_pl01x.c | 16 +- include/configs/imx8mm_beacon.h | 59 ++------ include/configs/imx8mm_venice.h | 10 +- include/configs/imx8mn_beacon.h | 61 -------- include/configs/imx8mn_venice.h | 10 +- include/configs/imx8mp_venice.h | 10 +- include/dm/platform_data/serial_pl01x.h | 4 + include/dt-bindings/clock/imx8mp-clock.h | 14 +- include/firmware/imx/sci/rpc.h | 27 ++-- include/firmware/imx/sci/sci.h | 24 +++ include/firmware/imx/sci/svc/misc/api.h | 42 ++++-- include/firmware/imx/sci/svc/pm/api.h | 94 ++++++++++++ include/firmware/imx/sci/svc/rm/api.h | 14 +- include/firmware/imx/sci/svc/seco/api.h | 5 +- include/firmware/imx/sci/svc/timer/api.h | 33 +++++ include/fsl_sec.h | 4 +- include/imx_sip.h | 6 +- 162 files changed, 5926 insertions(+), 2076 deletions(-) delete mode 100644 arch/arm/dts/imx8mm-verdin-dahlia.dtsi create mode 100644 arch/arm/dts/imx8mp-venice-gw702x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-venice-gw702x.dtsi create mode 100644 arch/arm/dts/imx8mp-venice-gw7905-2x-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-venice-gw7905-2x.dts create mode 100644 arch/arm/dts/imx8mp-venice-gw7905.dtsi delete mode 100644 arch/arm/dts/imx8mp-verdin-dahlia.dtsi create mode 100644 arch/arm/include/asm/mach-imx/ahab.h rename arch/arm/include/asm/mach-imx/{s400_api.h => ele_api.h} (74%) delete mode 100644 board/beacon/imx8mm/README create mode 100644 board/beacon/imx8mm/imx8mm_beacon.env delete mode 100644 board/beacon/imx8mn/README create mode 100644 board/beacon/imx8mn/imx8mn_beacon.env create mode 100644 configs/imx8mm_beacon_fspi_defconfig create mode 100644 doc/board/beacon/beacon-imx8mm.rst create mode 100644 doc/board/beacon/beacon-imx8mn.rst create mode 100644 doc/board/phytec/index.rst create mode 100644 doc/board/phytec/phycore-imx8mm.rst create mode 100644 doc/board/phytec/phycore-imx8mp.rst create mode 100644 drivers/adc/imx93-adc.c rename drivers/misc/{sentinel => imx_ele}/Makefile (71%) rename drivers/misc/{sentinel/s400_api.c => imx_ele/ele_api.c} (50%) rename drivers/misc/{sentinel/s4mu.c => imx_ele/ele_mu.c} (85%) rename drivers/misc/{sentinel => imx_ele}/fuse.c (84%) create mode 100644 include/firmware/imx/sci/svc/timer/api.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1