June 2023 - U-Boot

Re: Please pull u-boot-ubi
by Tom Rini 06 Jun '23

06 Jun '23

On Tue, Jun 06, 2023 at 02:07:53PM +0200, Heiko Schocher wrote: > Hello Tom, > > please pull from u-boot-ubi.git master > > The following changes since commit 26659d426548d1c395ef878c3b820e53a6e3b346: > > Merge tag 'efi-2023-07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-06-02 > 12:13:01 -0400) > > are available in the Git repository at: > > https://source.denx.de/u-boot/custodians/u-boot-ubi.git tags/ubifixes-for-v2023-07-rc4 > > for you to fetch changes up to b46cec41664f35c689385c70c76d274a059c7251: > > ubifs: allow loading to above 4GiB (2023-06-06 10:37:25 +0200) > Applied to u-boot/master, thanks! -- Tom

1 0

[PATCH v7 0/4] Boot variables management for removable media
by Raymond Mao 06 Jun '23

06 Jun '23

Major changes: 1.Rename and move bootorder and bootoption apis from cmd to lib for re-use between eficonfig and bootmgr 2.Fix incorrect return code of boot option update Correct the return code for out-of-memory and no boot option found 3.Changes for complying to EFI spec §3.5.1.1 'Removable Media Boot Behavior'. Boot variables can be automatically generated during a removable media is probed. At the same time, unused boot variables will be detected and removed. 4.The boot variables automatically generated for removable medias should be with short form of device path without device nodes. This is a requirement for the case that a removable media is plugged into a different port but is still able to work with the existing boot variables. Raymond Mao (4): Move bootorder and bootoption apis to lib Fix incorrect return code of boot option update Boot var automatic management for removable medias Load option with short device path for boot vars cmd/bootmenu.c | 4 +- cmd/eficonfig.c | 410 +---------------------------------- include/efi_config.h | 5 - include/efi_loader.h | 11 + lib/efi_loader/efi_bootmgr.c | 385 ++++++++++++++++++++++++++++++++ lib/efi_loader/efi_disk.c | 7 + lib/efi_loader/efi_helper.c | 25 +++ lib/efi_loader/efi_setup.c | 5 + 8 files changed, 442 insertions(+), 410 deletions(-) -- 2.25.1

3 12

[PATCHv2] ubifs: allow loading to above 4GiB
by Ben Dooks 06 Jun '23

06 Jun '23

The ubifsload command is truncating any address above 4GiB as it casts this address to an u32, instead of using an unsigned long which most of the other load commands do. Change this to an unsigned long to allow loading into high memory for boards which use these areas. Fixes the following error: => ubifsload 0x2100000000 /boot/Image.lzma Loading file '/boot/Image.lzma' to addr 0x00000000... Unhandled exception: Store/AMO access fault Signed-off-by: Ben Dooks <ben.dooks(a)sifive.com> Signed-off-by: Ben Dooks <ben.dooks(a)codethink.co.uk> --- v2: - fixed debug print --- cmd/ubifs.c | 4 ++-- fs/ubifs/ubifs.c | 4 ++-- include/ubifs_uboot.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/cmd/ubifs.c b/cmd/ubifs.c index 6a01d0988a..2a035bc7ae 100644 --- a/cmd/ubifs.c +++ b/cmd/ubifs.c @@ -111,7 +111,7 @@ static int do_ubifs_load(struct cmd_tbl *cmdtp, int flag, int argc, char *filename; char *endp; int ret; - u32 addr; + unsigned long addr; u32 size = 0; if (!ubifs_mounted) { @@ -133,7 +133,7 @@ static int do_ubifs_load(struct cmd_tbl *cmdtp, int flag, int argc, if (endp == argv[3]) return CMD_RET_USAGE; } - debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size); + debug("Loading file '%s' to address 0x%08lx (size %d)\n", filename, addr, size); ret = ubifs_load(filename, addr, size); if (ret) { diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index d3026e3101..609bdbf603 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -925,12 +925,12 @@ void ubifs_close(void) } /* Compat wrappers for common/cmd_ubifs.c */ -int ubifs_load(char *filename, u32 addr, u32 size) +int ubifs_load(char *filename, unsigned long addr, u32 size) { loff_t actread; int err; - printf("Loading file '%s' to addr 0x%08x...\n", filename, addr); + printf("Loading file '%s' to addr 0x%08lx...\n", filename, addr); err = ubifs_read(filename, (void *)(uintptr_t)addr, 0, size, &actread); if (err == 0) { diff --git a/include/ubifs_uboot.h b/include/ubifs_uboot.h index b025779d59..db8a29e9bb 100644 --- a/include/ubifs_uboot.h +++ b/include/ubifs_uboot.h @@ -21,7 +21,7 @@ int ubifs_init(void); int uboot_ubifs_mount(char *vol_name); void uboot_ubifs_umount(void); int ubifs_is_mounted(void); -int ubifs_load(char *filename, u32 addr, u32 size); +int ubifs_load(char *filename, unsigned long addr, u32 size); int ubifs_set_blk_dev(struct blk_desc *rbdd, struct disk_partition *info); int ubifs_ls(const char *dir_name); -- 2.39.2

2 1

[PATCH 00/30] imx: misc update and fix
by Peng Fan (OSS) 06 Jun '23

06 Jun '23

From: Peng Fan <peng.fan(a)nxp.com> This patchset includes some misc update and fix from NXP downstream - i.MX8 SCU API usage correction - Use ELE(EdgeLockSecure Enclave) public from NXP to replace S400 or Sentinel - Secondary container support and header checking fix - New ELE API to support secure fuse and lifecycle and DEK Blob - Bootaux: update macro and support i.MX8 - i.MX8 AHAB code clean up to reuse common code - ELE MU update CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/16469 Clement Faure (1): imx: cmd_dek: add ELE DEK Blob generation support Gaurav Jain (1): imx: imx8: ahab: sha256: enable image verification using ARMv8 crypto extension Maximus Sun (1): imx: priblob: Update to use structure Nitin Garg (1): imx: parse-container: Use malloc for container processing Peng Fan (17): imx: mach: correct SCU API usage imx: toradex/apalis-imx8: correct SCU API usage imx: toradex/colibri-imx8x: correct SCU API usage imx: siemens/capricorn: correct SCU API usage imx: advantech: correct SCU API usage imx: congatec/cgtqmx8: correct SCU API usage imx: scu_api: update to version 1.16 and add more APIs imx: use generic name ele(EdgeLockSecure Enclave) imx: parse-container: fix build warning imx: ele_ahab: use hextoul imx: ele_api: support program secure fuse and return lifecycle imx: ele_api: add DEK Blob generation imx: imx8ulp: start the ELE RNG at boot imx: iamge-container: support secondary container imx: bootaux: change names of MACROs used to boot MCU on iMX devices imx: imx8m: clock: not configure reserved SRC register imx: imx8m: add CAAM_BASE_ADDR Utkarsh Gupta (1): imx: fsl_sec: preprocessor casting issue with addresses involving math Ye Li (8): imx: cmd_dek: Fix Uninitialized pointer read imx: misc: ele_mu: Update MU TR registers count imx: misc: ele_mu: Update ELE MU driver imx: hab: Fix coverity issue in HAB event decoding imx: image-container: Fix container header checking imx: bootaux: Fix bootaux issue when running on ARM64 imx: imx8: bootaux: Add i.MX8 M4 boot support imx: ahab: Update AHAB for iMX8 and iMX8ULP arch/arm/Kconfig | 4 +- arch/arm/include/asm/arch-imx8m/imx-regs.h | 3 +- arch/arm/include/asm/arch-imx9/ccm_regs.h | 2 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +- arch/arm/include/asm/arch-mx7/imx-regs.h | 2 +- arch/arm/include/asm/global_data.h | 4 +- arch/arm/include/asm/mach-imx/ahab.h | 15 + .../asm/mach-imx/{s400_api.h => ele_api.h} | 53 +-- arch/arm/include/asm/mach-imx/sys_proto.h | 1 + arch/arm/mach-imx/Kconfig | 9 +- arch/arm/mach-imx/Makefile | 5 + arch/arm/mach-imx/cmd_dek.c | 89 ++++- arch/arm/mach-imx/ele_ahab.c | 91 ++++- arch/arm/mach-imx/hab.c | 41 ++- arch/arm/mach-imx/image-container.c | 96 ++++- arch/arm/mach-imx/imx8/ahab.c | 161 ++++++--- arch/arm/mach-imx/imx8/cpu.c | 180 +++++++++- arch/arm/mach-imx/imx8/fdt.c | 2 +- arch/arm/mach-imx/imx8/snvs_security_sc.c | 175 +++++---- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 1 - arch/arm/mach-imx/imx8ulp/Makefile | 1 - arch/arm/mach-imx/imx8ulp/rdc.c | 18 +- arch/arm/mach-imx/imx8ulp/soc.c | 16 +- arch/arm/mach-imx/imx8ulp/upower/upower_hal.c | 6 +- arch/arm/mach-imx/imx9/clock.c | 8 +- arch/arm/mach-imx/imx9/clock_root.c | 2 +- arch/arm/mach-imx/imx9/imx_bootaux.c | 6 +- arch/arm/mach-imx/imx9/soc.c | 16 +- arch/arm/mach-imx/imx9/trdc.c | 14 +- arch/arm/mach-imx/imx_bootaux.c | 45 ++- arch/arm/mach-imx/parse-container.c | 119 ++----- arch/arm/mach-imx/priblob.c | 10 +- board/advantech/imx8qm_dmsse20_a1/spl.c | 6 +- board/advantech/imx8qm_rom7720_a1/spl.c | 6 +- board/congatec/cgtqmx8/cgtqmx8.c | 8 +- board/freescale/imx8ulp_evk/spl.c | 20 +- board/freescale/imx93_evk/spl.c | 1 - board/kontron/sl-mx8mm/sl-mx8mm.c | 2 +- board/kontron/sl-mx8mm/spl.c | 2 +- board/siemens/capricorn/board.c | 12 +- board/technexion/pico-imx8mq/pico-imx8mq.c | 2 +- board/technexion/pico-imx8mq/spl.c | 2 +- board/toradex/apalis-imx8/apalis-imx8.c | 10 +- board/toradex/colibri-imx8x/colibri-imx8x.c | 10 +- drivers/misc/Kconfig | 4 +- drivers/misc/Makefile | 2 +- drivers/misc/imx8/scu_api.c | 78 ++++ drivers/misc/{sentinel => imx_ele}/Makefile | 2 +- .../s400_api.c => imx_ele/ele_api.c} | 333 ++++++++++++------ .../{sentinel/s4mu.c => imx_ele/ele_mu.c} | 38 +- drivers/misc/{sentinel => imx_ele}/fuse.c | 40 +-- .../power/domain/imx8-power-domain-legacy.c | 9 +- include/firmware/imx/sci/rpc.h | 27 +- include/firmware/imx/sci/sci.h | 24 ++ include/firmware/imx/sci/svc/misc/api.h | 42 ++- include/firmware/imx/sci/svc/pm/api.h | 94 +++++ include/firmware/imx/sci/svc/rm/api.h | 14 +- include/firmware/imx/sci/svc/seco/api.h | 5 +- include/firmware/imx/sci/svc/timer/api.h | 33 ++ include/fsl_sec.h | 4 +- include/imx_sip.h | 6 +- 61 files changed, 1446 insertions(+), 587 deletions(-) create mode 100644 arch/arm/include/asm/mach-imx/ahab.h rename arch/arm/include/asm/mach-imx/{s400_api.h => ele_api.h} (74%) rename drivers/misc/{sentinel => imx_ele}/Makefile (71%) rename drivers/misc/{sentinel/s400_api.c => imx_ele/ele_api.c} (50%) rename drivers/misc/{sentinel/s4mu.c => imx_ele/ele_mu.c} (85%) rename drivers/misc/{sentinel => imx_ele}/fuse.c (84%) create mode 100644 include/firmware/imx/sci/svc/timer/api.h -- 2.40.0

5 36

[PATCH] ubifs: allow loading to above 4GiB
by Ben Dooks 06 Jun '23

06 Jun '23

The ubifsload command is truncating any address above 4GiB as it casts this address to an u32, instead of using an unsigned long which most of the other load commands do. Change this to an unsigned long to allow loading into high memory for boards which use these areas. Fixes the following error: => ubifsload 0x2100000000 /boot/Image.lzma Loading file '/boot/Image.lzma' to addr 0x00000000... Unhandled exception: Store/AMO access fault Signed-off-by: Ben Dooks <ben.dooks(a)sifive.com> --- cmd/ubifs.c | 2 +- fs/ubifs/ubifs.c | 4 ++-- include/ubifs_uboot.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/cmd/ubifs.c b/cmd/ubifs.c index 6a01d0988a..33fff6500e 100644 --- a/cmd/ubifs.c +++ b/cmd/ubifs.c @@ -111,7 +111,7 @@ static int do_ubifs_load(struct cmd_tbl *cmdtp, int flag, int argc, char *filename; char *endp; int ret; - u32 addr; + unsigned long addr; u32 size = 0; if (!ubifs_mounted) { diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index d3026e3101..609bdbf603 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -925,12 +925,12 @@ void ubifs_close(void) } /* Compat wrappers for common/cmd_ubifs.c */ -int ubifs_load(char *filename, u32 addr, u32 size) +int ubifs_load(char *filename, unsigned long addr, u32 size) { loff_t actread; int err; - printf("Loading file '%s' to addr 0x%08x...\n", filename, addr); + printf("Loading file '%s' to addr 0x%08lx...\n", filename, addr); err = ubifs_read(filename, (void *)(uintptr_t)addr, 0, size, &actread); if (err == 0) { diff --git a/include/ubifs_uboot.h b/include/ubifs_uboot.h index b025779d59..db8a29e9bb 100644 --- a/include/ubifs_uboot.h +++ b/include/ubifs_uboot.h @@ -21,7 +21,7 @@ int ubifs_init(void); int uboot_ubifs_mount(char *vol_name); void uboot_ubifs_umount(void); int ubifs_is_mounted(void); -int ubifs_load(char *filename, u32 addr, u32 size); +int ubifs_load(char *filename, unsigned long addr, u32 size); int ubifs_set_blk_dev(struct blk_desc *rbdd, struct disk_partition *info); int ubifs_ls(const char *dir_name); -- 2.39.2

3 3

[RFC PATCH] mmc: zynq_sdhci: Dependable card detect
by Stefan Herbrechtsmeier 06 Jun '23

06 Jun '23

From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier(a)weidmueller.com> The card detect logic needs a short card present signal to work dependable. Without a present card the SDHCI_CARD_STATE_STABLE signal is not set dependable after a reset. Use the internal fixed card present signal to initiate the card detect logic. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier(a)weidmueller.com> --- On our hardware we get a "Sdhci card detect state not stable" error in the SPL if no mmc card is present. It is unclear if this patch is the correct solution, but a short card inserts or a fixed card present signal leads to a SDHCI_CARD_STATE_STABLE signal with and without card. drivers/mmc/zynq_sdhci.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index e44868aaec..a88feeb367 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -1075,6 +1075,26 @@ static int sdhci_zynqmp_set_dynamic_config(struct arasan_sdhci_priv *priv, return ret; } + /* The card detect logic needs a short card present signal to work + * dependable. Without a present card the SDHCI_CARD_STATE_STABLE + * signal is not set dependable after a reset. Use the internal + * fixed card present signal to initiate the card detect logic. + */ + if (!dev_read_bool(dev, "non-removable")) { + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_EMMC_SEL, + 1); + if (ret) { + dev_err(dev, "SD_CONFIG_EMMC_SEL failed\n"); + return ret; + } + ret = zynqmp_pm_set_sd_config(priv->node_id, SD_CONFIG_EMMC_SEL, + 0); + if (ret) { + dev_err(dev, "SD_CONFIG_EMMC_SEL failed\n"); + return ret; + } + } + return 0; } #endif -- 2.30.2

2 4

[PATCH v1 0/4] support trimed pca9450 new pmic
by Joy Zou 06 Jun '23

06 Jun '23

The patchset supports trim pmic pca9451a. For the details, please check the patch commit log Joy Zou (4): power: pmic: Modify the BUCK1 voltage range imx: imx93_evk: change VDD_SOC for new pmic trimed DTS: imx93: modify the BUCK1 voltage range configs: enable pmic regulator pca9450 arch/arm/dts/imx93-11x11-evk.dts | 20 ++------------------ board/freescale/imx93_evk/spl.c | 16 ++++++++++++++-- configs/imx93_11x11_evk_defconfig | 2 ++ drivers/power/regulator/pca9450.c | 29 ++++++++++++++++++++++++++++- include/power/pca9450.h | 2 ++ 5 files changed, 48 insertions(+), 21 deletions(-) -- 2.37.1

2 15

[PATCH v7 00/10] FMP versioning support
by Masahisa Kojima 06 Jun '23

06 Jun '23

Firmware version management is not implemented in the current FMP implementation. This series aims to add the versioning support in FMP. Currently, there is no way to know the current running firmware version through the EFI interface. FMP->GetImageInfo() returns always 0 for the version number. So a user can not know that expected firmware is running after the capsule update. EDK II reference implementation utilizes the FMP Payload Header inserted right before the capsule payload. U-Boot also follows the EDK II implementation. With this series applied, version number can be specified in the capsule file generation with mkeficapsule tool, then user can know the running firmware version through FMP->GetImageInfo() and ESRT. There is a design consideration for lowest supported version. If the backing storage is a file we can't trust any of that information since anyone can tamper with the file, although the variables are defined as RO. With that, we store the lowest supported version in the device tree. We can trust the information from dtb as long as the former stage boot loader verifies the image containing the dtb. The firmware version can not be stored in device tree because not all the capsule files do not have a device tree. Note that this series does not mandate the FMP Payload Header, compatible with boards that are already using the existing U-Boot FMP implementation. If no FMP Payload Header is found in the capsule file, fw_version, lowest supported version, last attempt version and last attempt status is set to 0 and this is the same behavior as existing FMP implementation. Major Changes in v7: - refactor the efi_capsule python test - add test cases for the FMP versioning Major Changes in v6: - change the location of fw_version and lowest supported version - fw_version is stored in FMP Payload Header in the capsule file - lowest_supported_version is stored in the device tree Major Changes in v5: - major design changes, versioning is implemented with device tree instead of EFI variable Major Changes in v4: - add python-based test Major Changes in v3: - exclude CONFIG_FWU_MULT Masahisa Kojima (10): efi_loader: add the number of image entries in efi_capsule_update_info efi_loader: store firmware version into FmpState variable efi_loader: versioning support in GetImageInfo efi_loader: get lowest supported version from device tree efi_loader: check lowest supported version mkeficapsule: add FMP Payload Header doc: uefi: add firmware versioning documentation doc: uefi: add anti-rollback documentation test: efi_capsule: refactor efi_capsule test test/py: efi_capsule: test for FMP versioning arch/arm/mach-rockchip/board.c | 4 +- .../imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 2 +- .../imx8mm-cl-iot-gate/imx8mm-cl-iot-gate.c | 2 +- board/emulation/qemu-arm/qemu-arm.c | 2 +- board/kontron/pitx_imx8m/pitx_imx8m.c | 2 +- board/kontron/sl-mx8mm/sl-mx8mm.c | 2 +- board/kontron/sl28/sl28.c | 2 +- board/rockchip/evb_rk3399/evb-rk3399.c | 2 +- board/sandbox/sandbox.c | 2 +- board/socionext/developerbox/developerbox.c | 2 +- board/st/stm32mp1/stm32mp1.c | 2 +- board/xilinx/common/board.c | 2 +- doc/develop/uefi/uefi.rst | 66 ++++ .../firmware/firmware-version.txt | 22 ++ doc/mkeficapsule.1 | 10 + include/efi_loader.h | 3 +- lib/efi_loader/efi_firmware.c | 276 ++++++++++++++-- lib/fwu_updates/fwu.c | 2 +- .../tests/test_efi_capsule/capsule_common.py | 86 +++++ test/py/tests/test_efi_capsule/conftest.py | 82 +++++ .../test_capsule_firmware_fit.py | 213 ++++++------- .../test_capsule_firmware_raw.py | 301 +++++++----------- .../test_capsule_firmware_signed_fit.py | 267 ++++++---------- .../test_capsule_firmware_signed_raw.py | 274 ++++++---------- test/py/tests/test_efi_capsule/version.dts | 24 ++ tools/eficapsule.h | 30 ++ tools/mkeficapsule.c | 37 ++- 27 files changed, 1046 insertions(+), 673 deletions(-) create mode 100644 doc/device-tree-bindings/firmware/firmware-version.txt create mode 100644 test/py/tests/test_efi_capsule/capsule_common.py create mode 100644 test/py/tests/test_efi_capsule/version.dts -- 2.34.1

3 14

[PATCH 1/1] Makefile: clean lib/efi_loader/helloworld_efi.S
by Heinrich Schuchardt 06 Jun '23

06 Jun '23

lib/efi_loader/helloworld_efi.S is a generated file and shall be removed by 'make clean'. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 10bfaa52ad..d8b5fb13b8 100644 --- a/Makefile +++ b/Makefile @@ -2160,7 +2160,7 @@ CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ mkimage-out.spl.mkimage mkimage.spl.mkimage imx-boot.map \ itb.fit.fit itb.fit.itb itb.map spl.map mkimage-out.rom.mkimage \ mkimage.rom.mkimage rom.map simple-bin.map simple-bin-spi.map \ - idbloader-spi.img + idbloader-spi.img lib/efi_loader/helloworld_efi.S # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config include/generated spl tpl \ -- 2.39.2

3 2

Pull request, u-boot-tegra/master
by Tom Warren 05 Jun '23

05 Jun '23

Tom, please pull u-boot-tegra/master into u-boot/master. Thanks. It's passed 'buildman tegra' w/o error, and Svyatoslav has tested it on his boards. The following changes since commit 26659d426548d1c395ef878c3b820e53a6e3b346: Merge tag 'efi-2023-07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-06-02 12:13:01 -0400) are available in the git repository at: https://source.denx.de/u-boot/custodians/u-boot-tegra.git master for you to fetch changes up to 28731540f9427d5d58ee2a554d0f2a0c5702ab80: board: htc: endeavoru: add One X support (2023-06-05 10:23:30 -0700) ---------------------------------------------------------------- Jonas SchwÃ¶bel (1): configs: tegra-common-post: make PXE and DHCP boot targets optional Svyatoslav Ryhel (6): configs: tegra-common-post: add GPIO keyboard as STDIN device ARM: tegra: add SoC UID calculation function board: asus: transformer: add ASUS Transformer T30 family support board: asus: grouper: add Google Nexus 7 (2012) support board: lg: x3: add Optimus 4X HD and Optimus Vu support board: htc: endeavoru: add One X support Thierry Reding (2): ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano ARM: tegra: Enable poweroff command on Jetson TX2 Tomasz Maciej Nowak (1): ARM: dts: trimslice: sync SPI node with Linux dts arch/arm/dts/Makefile | 12 + arch/arm/dts/tegra20-trimslice.dts | 8 +- arch/arm/dts/tegra30-asus-grouper-common.dtsi | 157 +++++++ arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts | 43 ++ arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts | 36 ++ arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts | 62 +++ arch/arm/dts/tegra30-asus-p1801-t.dts | 17 + arch/arm/dts/tegra30-asus-tf201.dts | 9 + arch/arm/dts/tegra30-asus-tf300t.dts | 18 + arch/arm/dts/tegra30-asus-tf300tg.dts | 9 + arch/arm/dts/tegra30-asus-tf300tl.dts | 9 + arch/arm/dts/tegra30-asus-tf600t.dts | 89 ++++ arch/arm/dts/tegra30-asus-tf700t.dts | 13 + arch/arm/dts/tegra30-asus-transformer.dtsi | 211 ++++++++++ arch/arm/dts/tegra30-htc-endeavoru.dts | 166 ++++++++ arch/arm/dts/tegra30-lg-p880.dts | 40 ++ arch/arm/dts/tegra30-lg-p895.dts | 50 +++ arch/arm/dts/tegra30-lg-x3.dtsi | 180 +++++++++ arch/arm/include/asm/arch-tegra/fuse.h | 7 + arch/arm/mach-tegra/Makefile | 4 + arch/arm/mach-tegra/fuse.c | 151 +++++++ arch/arm/mach-tegra/tegra30/Kconfig | 20 + board/asus/grouper/Kconfig | 22 + board/asus/grouper/MAINTAINERS | 6 + board/asus/grouper/Makefile | 14 + board/asus/grouper/grouper-spl-max.c | 45 +++ board/asus/grouper/grouper-spl-ti.c | 41 ++ board/asus/grouper/grouper.c | 202 +++++++++ board/asus/grouper/pinmux-config-grouper.h | 362 +++++++++++++++++ board/asus/transformer-t30/Kconfig | 35 ++ board/asus/transformer-t30/MAINTAINERS | 6 + board/asus/transformer-t30/Makefile | 11 + .../transformer-t30/pinmux-config-transformer.h | 365 +++++++++++++++++ board/asus/transformer-t30/transformer-t30-spl.c | 41 ++ board/asus/transformer-t30/transformer-t30.c | 201 +++++++++ board/htc/endeavoru/Kconfig | 12 + board/htc/endeavoru/MAINTAINERS | 6 + board/htc/endeavoru/Makefile | 11 + board/htc/endeavoru/endeavoru-spl.c | 47 +++ board/htc/endeavoru/endeavoru.c | 116 ++++++ board/htc/endeavoru/pinmux-config-endeavoru.h | 362 +++++++++++++++++ board/lg/x3-t30/Kconfig | 26 ++ board/lg/x3-t30/MAINTAINERS | 6 + board/lg/x3-t30/Makefile | 11 + board/lg/x3-t30/pinmux-config-x3.h | 449 +++++++++++++++++++++ board/lg/x3-t30/x3-t30-spl.c | 48 +++ board/lg/x3-t30/x3-t30.c | 176 ++++++++ configs/endeavoru_defconfig | 82 ++++ configs/grouper_E1565.config | 2 + configs/grouper_PM269.config | 2 + configs/grouper_common_defconfig | 82 ++++ configs/p1801-t.config | 2 + configs/p2371-2180_defconfig | 1 + configs/p2771-0000-000_defconfig | 1 + configs/p2771-0000-500_defconfig | 1 + configs/p3450-0000_defconfig | 1 + configs/p880.config | 4 + configs/p895.config | 4 + configs/tf201.config | 2 + configs/tf300t.config | 2 + configs/tf300tg.config | 2 + configs/tf300tl.config | 2 + configs/tf600t.config | 5 + configs/tf700t.config | 2 + configs/tilapia.config | 3 + configs/transformer_t30_defconfig | 83 ++++ configs/x3_t30_defconfig | 86 ++++ doc/board/asus/grouper_common.rst | 95 +++++ doc/board/asus/index.rst | 10 + doc/board/asus/transformer_t30.rst | 96 +++++ doc/board/htc/endeavoru.rst | 90 +++++ doc/board/htc/index.rst | 9 + doc/board/lg/index.rst | 9 + doc/board/lg/x3_t30.rst | 93 +++++ include/configs/endeavoru.h | 72 ++++ include/configs/grouper.h | 68 ++++ include/configs/tegra-common-post.h | 28 +- include/configs/transformer-common.h | 94 +++++ include/configs/transformer-t30.h | 46 +++ include/configs/x3-t30.h | 85 ++++ 80 files changed, 5090 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/tegra30-asus-grouper-common.dtsi create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts create mode 100644 arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts create mode 100644 arch/arm/dts/tegra30-asus-p1801-t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300tg.dts create mode 100644 arch/arm/dts/tegra30-asus-tf300tl.dts create mode 100644 arch/arm/dts/tegra30-asus-tf600t.dts create mode 100644 arch/arm/dts/tegra30-asus-tf700t.dts create mode 100644 arch/arm/dts/tegra30-asus-transformer.dtsi create mode 100644 arch/arm/dts/tegra30-htc-endeavoru.dts create mode 100644 arch/arm/dts/tegra30-lg-p880.dts create mode 100644 arch/arm/dts/tegra30-lg-p895.dts create mode 100644 arch/arm/dts/tegra30-lg-x3.dtsi create mode 100644 arch/arm/mach-tegra/fuse.c create mode 100644 board/asus/grouper/Kconfig create mode 100644 board/asus/grouper/MAINTAINERS create mode 100644 board/asus/grouper/Makefile create mode 100644 board/asus/grouper/grouper-spl-max.c create mode 100644 board/asus/grouper/grouper-spl-ti.c create mode 100644 board/asus/grouper/grouper.c create mode 100644 board/asus/grouper/pinmux-config-grouper.h create mode 100644 board/asus/transformer-t30/Kconfig create mode 100644 board/asus/transformer-t30/MAINTAINERS create mode 100644 board/asus/transformer-t30/Makefile create mode 100644 board/asus/transformer-t30/pinmux-config-transformer.h create mode 100644 board/asus/transformer-t30/transformer-t30-spl.c create mode 100644 board/asus/transformer-t30/transformer-t30.c create mode 100644 board/htc/endeavoru/Kconfig create mode 100644 board/htc/endeavoru/MAINTAINERS create mode 100644 board/htc/endeavoru/Makefile create mode 100644 board/htc/endeavoru/endeavoru-spl.c create mode 100644 board/htc/endeavoru/endeavoru.c create mode 100644 board/htc/endeavoru/pinmux-config-endeavoru.h create mode 100644 board/lg/x3-t30/Kconfig create mode 100644 board/lg/x3-t30/MAINTAINERS create mode 100644 board/lg/x3-t30/Makefile create mode 100644 board/lg/x3-t30/pinmux-config-x3.h create mode 100644 board/lg/x3-t30/x3-t30-spl.c create mode 100644 board/lg/x3-t30/x3-t30.c create mode 100644 configs/endeavoru_defconfig create mode 100644 configs/grouper_E1565.config create mode 100644 configs/grouper_PM269.config create mode 100644 configs/grouper_common_defconfig create mode 100644 configs/p1801-t.config create mode 100644 configs/p880.config create mode 100644 configs/p895.config create mode 100644 configs/tf201.config create mode 100644 configs/tf300t.config create mode 100644 configs/tf300tg.config create mode 100644 configs/tf300tl.config create mode 100644 configs/tf600t.config create mode 100644 configs/tf700t.config create mode 100644 configs/tilapia.config create mode 100644 configs/transformer_t30_defconfig create mode 100644 configs/x3_t30_defconfig create mode 100644 doc/board/asus/grouper_common.rst create mode 100644 doc/board/asus/index.rst create mode 100644 doc/board/asus/transformer_t30.rst create mode 100644 doc/board/htc/endeavoru.rst create mode 100644 doc/board/htc/index.rst create mode 100644 doc/board/lg/index.rst create mode 100644 doc/board/lg/x3_t30.rst create mode 100644 include/configs/endeavoru.h create mode 100644 include/configs/grouper.h create mode 100644 include/configs/transformer-common.h create mode 100644 include/configs/transformer-t30.h create mode 100644 include/configs/x3-t30.h

2 1