April 2023 - U-Boot

PSCI: prefetch abort with Mainline linux (even with rockchip u-boot)
by Jagan Teki 13 Sep '23

13 Sep '23

Hi Kever and Heiko, Rockchip 32-bit SoC, like rv1126 seems to depend on PSCI to bring SMP in linux. With rockchip u-boot and Mainline U-Boot the psci in linux-next triggers the abort. (note that I have added rockchip_smcc and enabled PSCI in u-boot) [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 6.1.0-rc1-00029-gb09e57e6064a (j@j-ThinkPad-E14-Gen-2) (arm-linux-gnueabihf-gcc (GCC) 11.0.1 20210310 (experimental) [master revision 5987d8a79cda1069c774e5c302d5597310270026], GNU ld (Linaro_Binutils-2021.03) 2.36.50.20210310) #12 SMP Sat Oct 22 19:44:56 IST 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Edgeble Neu2 IO Board [ 0.000000] earlycon: uart8250 at MMIO32 0xff570000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] Bad mode in prefetch abort handler detected [ 0.000000] Internal error: Oops - bad mode: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc1-00029-gb09e57e6064a #12 [ 0.000000] Hardware name: Generic DT based system [ 0.000000] PC is at 0x133fd468 [ 0.000000] LR is at __invoke_psci_fn_smc+0x38/0x58 [ 0.000000] pc : [<133fd468>] lr : [<c0eb20f0>] psr: 600001d6 [ 0.000000] sp : c1e01e68 ip : c1e01ec0 fp : 80000200 [ 0.000000] r10: c1e01f58 r9 : 7fffffff r8 : c1e09410 [ 0.000000] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 84000000 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode MON_32 ISA ARM Segment none [ 0.000000] Control: 10c5387d Table: 0020406a DAC: c1e09980 [ 0.000000] Register r0 information: non-paged memory [ 0.000000] Register r1 information: NULL pointer [ 0.000000] Register r2 information: NULL pointer [ 0.000000] Register r3 information: NULL pointer [ 0.000000] Register r4 information: NULL pointer [ 0.000000] Register r5 information: NULL pointer [ 0.000000] Register r6 information: NULL pointer [ 0.000000] Register r7 information: NULL pointer [ 0.000000] Register r8 information: non-slab/vmalloc memory [ 0.000000] Register r9 information: non-paged memory [ 0.000000] Register r10 information: non-slab/vmalloc memory [ 0.000000] Register r11 information: non-paged memory [ 0.000000] Register r12 information: non-slab/vmalloc memory [ 0.000000] Process swapper (pid: 0, stack limit = 0x(ptrval)) [ 0.000000] Stack: (0xc1e01e68 to 0xc1e02000) [ 0.000000] 1e60: 84000000 00000000 00000000 00000000 00000000 00000000 [ 0.000000] 1e80: 00000000 00000000 c1e09410 7fffffff c1e01f58 80000200 c1e01ec0 c1e01e68 [ 0.000000] 1ea0: c0eb20f0 133fd468 600001d6 ffffffff c1e09980 00000000 c20891c0 c1b1c168 [ 0.000000] 1ec0: 00000000 00000000 00000000 00000000 c1e01edc 00000000 c20891c0 c1245ac8 [ 0.000000] 1ee0: ff8005a8 00000000 c1d2fca0 00000000 eefea2fc c1c93594 eefea2fc c1e09980 [ 0.000000] 1f00: c20891c0 c1b1c168 c1e09410 c1c93a10 eefea2fc c1c939d8 c1d2fbdc 00000000 [ 0.000000] 1f20: 7fffffff c1caf854 c1e0afa0 c1c04c44 00000000 c1e01f4c c1e01f50 00000000 [ 0.000000] 1f40: c1e09980 c198cfec c1e01f9c 00000000 80000000 c1e09980 ffffffff ffffffff [ 0.000000] 1f60: c2089064 08300000 410fc075 10c5387d 00000000 c039de88 c1e01f9c 00000000 [ 0.000000] 1f80: c1e09980 c1c00420 c1e04ec0 c1e09980 c2089064 08300000 410fc075 10c5387d [ 0.000000] 1fa0: 00000000 c1c00b08 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.000000] 1fc0: 00000000 c1cc8a6c 00000000 00000000 00000000 c1c00420 00000051 10c0387d [ 0.000000] 1fe0: 00000000 08300000 410fc075 10c5387d 00000000 00000000 00000000 00000000 [ 0.000000] __invoke_psci_fn_smc from 0xc1e01e68 [ 0.000000] Code: bad PC value Any comments? Thanks, Jagan.

2 1

[PATCH v3 0/9] New boards support: db845c and qcs404-evb
by Sumit Garg 11 Sep '23

11 Sep '23

Add support for two new boards db845c and qcs404-evb: - db845c is a 96boards compliant platform aka RB3 based on Qualcomm SDM845 SoC. - qcs404-evb is an evaluation board from Qualcomm based on QCS404 SoC. Both these platforms have one thing in common that u-boot is chain-loaded in 64-bit mode via Android Boot Loader (ABL) which is an EFI application. For further details on chain-loading refer to platform specific documentation: - doc/board/qualcomm/sdm845.rst - doc/board/qualcomm/qcs404.rst Changes in v3: - Add clocks re-initialization for UART and eMMC for qcs404-evb. - Pick up Ramon's review tag for patches 1-7. Changes in v2: - Added patch #1 to fix DT node overrides in starqltechn-uboot.dtsi. - Updated patch #2 commit description. - Fixed a typo (s/96Board/96Boards/) in patch #5. Sumit Garg (9): board: starqltechn: Align DT node overrides with sdm845.dtsi arm64: dts: sdm845: Remove redundant u-boot DT properties clocks: sdm845: Import qcom,gcc-sdm845.h uart: sdm845: Fix debug UART pinmux board: qualcomm: Add support for dragonboard845c mmc: msm_sdhci: Add SDCC version 5.0.0 support pinctrl: qcom: Add pinctrl driver for QCS404 SoC clocks: qcom: Add clock driver for QCS404 SoC board: qualcomm: Add support for QCS404 EVB arch/arm/dts/Makefile | 1 + arch/arm/dts/dragonboard845c-uboot.dtsi | 37 +++ arch/arm/dts/dragonboard845c.dts | 44 ++++ arch/arm/dts/qcs404-evb-uboot.dtsi | 24 ++ arch/arm/dts/qcs404-evb.dts | 81 ++++++ arch/arm/dts/sdm845.dtsi | 8 +- arch/arm/dts/starqltechn-uboot.dtsi | 18 +- arch/arm/dts/starqltechn.dts | 2 +- arch/arm/mach-snapdragon/Kconfig | 25 ++ arch/arm/mach-snapdragon/Makefile | 3 + arch/arm/mach-snapdragon/clock-qcs404.c | 79 ++++++ arch/arm/mach-snapdragon/clock-sdm845.c | 3 +- arch/arm/mach-snapdragon/clock-snapdragon.c | 1 + .../include/mach/sysmap-qcs404.h | 40 +++ arch/arm/mach-snapdragon/pinctrl-qcs404.c | 55 ++++ arch/arm/mach-snapdragon/pinctrl-snapdragon.c | 1 + arch/arm/mach-snapdragon/pinctrl-snapdragon.h | 1 + arch/arm/mach-snapdragon/sysmap-qcs404.c | 31 +++ board/qualcomm/dragonboard845c/Kconfig | 12 + board/qualcomm/dragonboard845c/MAINTAINERS | 6 + board/qualcomm/dragonboard845c/Makefile | 9 + board/qualcomm/dragonboard845c/db845c.its | 63 +++++ .../dragonboard845c/dragonboard845c.c | 9 + board/qualcomm/qcs404-evb/Kconfig | 15 ++ board/qualcomm/qcs404-evb/MAINTAINERS | 6 + board/qualcomm/qcs404-evb/Makefile | 6 + board/qualcomm/qcs404-evb/qcs404-evb.c | 33 +++ board/qualcomm/qcs404-evb/qcs404-evb.its | 64 +++++ configs/dragonboard845c_defconfig | 28 ++ configs/qcs404evb_defconfig | 39 +++ doc/board/qualcomm/index.rst | 1 + doc/board/qualcomm/qcs404.rst | 79 ++++++ doc/board/qualcomm/sdm845.rst | 100 ++++++- drivers/mmc/msm_sdhci.c | 96 ++++--- include/configs/dragonboard845c.h | 28 ++ include/configs/qcs404-evb.h | 27 ++ include/dt-bindings/clock/qcom,gcc-qcs404.h | 180 +++++++++++++ include/dt-bindings/clock/qcom,gcc-sdm845.h | 246 ++++++++++++++++++ 38 files changed, 1439 insertions(+), 62 deletions(-) create mode 100644 arch/arm/dts/dragonboard845c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard845c.dts create mode 100644 arch/arm/dts/qcs404-evb-uboot.dtsi create mode 100644 arch/arm/dts/qcs404-evb.dts create mode 100644 arch/arm/mach-snapdragon/clock-qcs404.c create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-qcs404.h create mode 100644 arch/arm/mach-snapdragon/pinctrl-qcs404.c create mode 100644 arch/arm/mach-snapdragon/sysmap-qcs404.c create mode 100644 board/qualcomm/dragonboard845c/Kconfig create mode 100644 board/qualcomm/dragonboard845c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard845c/Makefile create mode 100644 board/qualcomm/dragonboard845c/db845c.its create mode 100644 board/qualcomm/dragonboard845c/dragonboard845c.c create mode 100644 board/qualcomm/qcs404-evb/Kconfig create mode 100644 board/qualcomm/qcs404-evb/MAINTAINERS create mode 100644 board/qualcomm/qcs404-evb/Makefile create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.c create mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.its create mode 100644 configs/dragonboard845c_defconfig create mode 100644 configs/qcs404evb_defconfig create mode 100644 doc/board/qualcomm/qcs404.rst create mode 100644 include/configs/dragonboard845c.h create mode 100644 include/configs/qcs404-evb.h create mode 100644 include/dt-bindings/clock/qcom,gcc-qcs404.h create mode 100644 include/dt-bindings/clock/qcom,gcc-sdm845.h -- 2.25.1

5 32

[PATCH v3 00/13] Fuzzing and ASAN for sandbox
by Andrew Scull 28 Aug '23

28 Aug '23

This series introduces ASAN and a basic fuzzing infrastructure that works with sandbox. The example fuzz test towards the end of the series will find something pretty quickly. That something is fixed by the series "virtio: Harden and test vring" that needs to be applied for the final patch in this series. There is some refactoring to stop using '.' prefixed sections. ELF defines sections with names that contain anything that isn't alphanumeric or an underscore as being for system use which means clang's ASAN instrumentation happily add redzones between the contained objects. That's not what we want for things like linker lists where the linker script has carefully placed the sections contiguously. By renaming the sections, clang sees them as user sections and doesn't add instrumentation. ASAN is left disabled by default as there are still some tests that it triggers on and will need some more investigation to fix. It can be enabled with CONFIG_ASAN or passing `-a ASAN` to buildman. I abandonded the previous attempts to refactor sandbox EFI and getopt declaration as the changes resulted in problems out of the scope of this CL. I haven't tried to understand what EFI on sandbox should look like, but I have found that the linker list implementation is very brittle when up against compiler optimisation since ef123c5253 started to use static, zero-length arrays to mark the beginning and end of lists but the compiler see this as something it can get rid of. >From v1: - corrected handling of EFI symbols by sandbox linker script - per comments, some renaming and explaining - dropped RFC for dlmalloc ASAN instrumentation (work required to improve it) - added patch to reduce logging noise in fuzzer >From v2: - remove sandbox EFI and getopt refactoring, they obstruct the series - resolve a couple more ASAN errors - fix LTO, xtensa and MIPS builds - add ASAN build targets for CI Andrew Scull (13): serial: sandbox: Fix buffer underflow in puts sandbox: Rename EFI runtime sections sandbox: Rename getopt sections linker_lists: Rename sections to remove . prefix sandbox: Add support for Address Sanitizer test/py: test_stackprotector: Disable for ASAN CI: Azure: Build with ASAN enabled fuzzing_engine: Add fuzzing engine uclass test: fuzz: Add framework for fuzzing sandbox: Decouple program entry from sandbox init sandbox: Add libfuzzer integration sandbox: Implement fuzzing engine driver fuzz: virtio: Add fuzzer for vring .azure-pipelines.yml | 6 ++ Kconfig | 16 ++++ arch/Kconfig | 2 + arch/arc/cpu/u-boot.lds | 4 +- arch/arm/config.mk | 4 +- arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 4 +- arch/arm/cpu/armv7/sunxi/u-boot-spl.lds | 4 +- arch/arm/cpu/armv8/u-boot-spl.lds | 4 +- arch/arm/cpu/armv8/u-boot.lds | 4 +- arch/arm/cpu/u-boot-spl.lds | 4 +- arch/arm/cpu/u-boot.lds | 6 +- arch/arm/mach-at91/arm926ejs/u-boot-spl.lds | 2 +- arch/arm/mach-at91/armv7/u-boot-spl.lds | 2 +- arch/arm/mach-omap2/u-boot-spl.lds | 4 +- arch/arm/mach-orion5x/u-boot-spl.lds | 4 +- arch/arm/mach-rockchip/u-boot-tpl-v8.lds | 4 +- arch/arm/mach-zynq/u-boot-spl.lds | 4 +- arch/arm/mach-zynq/u-boot.lds | 4 +- arch/m68k/cpu/u-boot.lds | 4 +- arch/microblaze/cpu/u-boot-spl.lds | 4 +- arch/microblaze/cpu/u-boot.lds | 4 +- arch/mips/config.mk | 2 +- arch/mips/cpu/u-boot-spl.lds | 4 +- arch/mips/cpu/u-boot.lds | 4 +- arch/nios2/cpu/u-boot.lds | 4 +- arch/powerpc/cpu/mpc83xx/u-boot.lds | 4 +- arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 4 +- arch/powerpc/cpu/mpc85xx/u-boot.lds | 4 +- arch/riscv/cpu/u-boot-spl.lds | 4 +- arch/riscv/cpu/u-boot.lds | 4 +- arch/sandbox/config.mk | 21 ++++- arch/sandbox/cpu/os.c | 76 +++++++++++++++++ arch/sandbox/cpu/start.c | 2 +- arch/sandbox/cpu/u-boot-spl.lds | 10 +-- arch/sandbox/cpu/u-boot.lds | 32 ++++---- arch/sandbox/dts/test.dts | 4 + arch/sandbox/include/asm/fuzzing_engine.h | 25 ++++++ arch/sandbox/include/asm/getopt.h | 2 +- arch/sandbox/include/asm/main.h | 18 ++++ arch/sandbox/include/asm/sections.h | 4 +- arch/sandbox/lib/sections.c | 8 +- arch/sh/cpu/u-boot.lds | 4 +- arch/x86/cpu/u-boot-64.lds | 6 +- arch/x86/cpu/u-boot-spl.lds | 6 +- arch/x86/cpu/u-boot.lds | 6 +- arch/x86/lib/elf_ia32_efi.lds | 4 +- arch/x86/lib/elf_x86_64_efi.lds | 4 +- arch/xtensa/cpu/u-boot.lds | 4 +- arch/xtensa/include/asm/ldscript.h | 13 ++- board/compulab/cm_t335/u-boot.lds | 4 +- board/cssi/MCR3000/u-boot.lds | 4 +- .../davinci/da8xxevm/u-boot-spl-da850evm.lds | 2 +- board/qualcomm/dragonboard820c/u-boot.lds | 4 +- board/samsung/common/exynos-uboot-spl.lds | 4 +- board/synopsys/iot_devkit/u-boot.lds | 4 +- board/ti/am335x/u-boot.lds | 4 +- board/vscom/baltos/u-boot.lds | 4 +- doc/api/linker_lists.rst | 22 ++--- doc/develop/commands.rst | 4 +- doc/develop/driver-model/of-plat.rst | 4 +- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/fuzz/Kconfig | 17 ++++ drivers/fuzz/Makefile | 8 ++ drivers/fuzz/fuzzing_engine-uclass.c | 28 +++++++ drivers/fuzz/sandbox_fuzzing_engine.c | 35 ++++++++ drivers/serial/sandbox.c | 2 +- include/dm/uclass-id.h | 1 + include/fuzzing_engine.h | 51 ++++++++++++ include/linker_lists.h | 18 ++-- include/test/fuzz.h | 51 ++++++++++++ test/Makefile | 1 + test/fuzz/Makefile | 8 ++ test/fuzz/cmd_fuzz.c | 82 +++++++++++++++++++ test/fuzz/virtio.c | 72 ++++++++++++++++ test/py/tests/test_stackprotector.py | 1 + tools/mips-relocs.c | 9 +- 77 files changed, 673 insertions(+), 151 deletions(-) create mode 100644 arch/sandbox/include/asm/fuzzing_engine.h create mode 100644 arch/sandbox/include/asm/main.h create mode 100644 drivers/fuzz/Kconfig create mode 100644 drivers/fuzz/Makefile create mode 100644 drivers/fuzz/fuzzing_engine-uclass.c create mode 100644 drivers/fuzz/sandbox_fuzzing_engine.c create mode 100644 include/fuzzing_engine.h create mode 100644 include/test/fuzz.h create mode 100644 test/fuzz/Makefile create mode 100644 test/fuzz/cmd_fuzz.c create mode 100644 test/fuzz/virtio.c -- 2.36.1.124.g0e6072fb45-goog

4 17

[PATCH v2 00/10] Introduce initial TI's J784S4 support
by Hari Nagalla 24 Aug '23

24 Aug '23

Hello Everyone! This series will introduce basic support (SD and UART) support for Texas Instruments J784S4 EVM. The J784S4 SoC device tree patches are taken from kernel patch submissions and will be updated as they are accepted and merged to the kernel tree. All other patches are specific to SPL and u-boot and do not have dependency on other trees. Appreciate a review for acceptance to u-boot tree. Here are some of the salient features of the J784S4 automotive grade application processor: The J784S4 SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration in automotive, ADAS and industrial applications requiring AI at the network edge. This SoC extends the K3 Jacinto 7 family of SoCs with focus on raising performance and integration while providing interfaces, memory architecture and compute performance for multi-sensor, high concurrency applications. Some highlights of this SoC are: * Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs, 4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for deep learning and CNN. * 3D GPU: Automotive grade IMG BXS-4-64 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one DPI interface. * Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role device subsystems, Up to 20 MCANs, among other peripherals. See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022) for further details: http://www.ti.com/lit/zip/spruj52 In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It supports the following interfaces: * 32 GB DDR4 RAM * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode * x1 Input Audio Jack, x1 Output Audio Jack * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port * x2 4L PCIe connector * x1 UHS-1 capable micro-SD card slot * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash, UFS flash. * x6 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * 40-pin User Expansion Connector * x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector * x1 15-pin CSI header * x6 MCAN instances Schematics: https://www.ti.com/lit/zip/sprr458 bootlog: https://paste.sr.ht/~hnagalla/f14840abc854519f912923662f1fdc8075d92107 Changes in v2: - Refactored environement scripts to 'j784s4.env' and removed scripts not needed for basic board bootup. - Imported the J7874S4 basic device tree files from v6.2 linux kernel. - Moved j784s4 clock definitions and clock data into one patch/commit. - coalesce board commits into one commit. Hari Nagalla (10): arm: dts: introduce j784s4 dtbs from linux kernel arm: dts: introduce j784s4 u-boot dtbs arm: K3: Add basic support for J784S4 SoC definition drivers: dma: Add support for J784S4 clk: clk-k3: Add support for J784S4 SoC power: domain: ti: Add support for J784S4 SoC ram: k3-ddrss: Add support for J784S4 SoC soc: ti: k3-socinfo: Add entry for J784S4 SoC board: ti: j784s4: Add board support for J784S4 SoC dt-bindings: ti-serdes-mux: Add defines for J784S4 SoC arch/arm/dts/Makefile | 2 + arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi | 8757 ++++++++++++++++ arch/arm/dts/k3-j784s4-ddr.dtsi | 8858 +++++++++++++++++ arch/arm/dts/k3-j784s4-evm-u-boot.dtsi | 135 + arch/arm/dts/k3-j784s4-evm.dts | 196 + arch/arm/dts/k3-j784s4-main.dtsi | 1007 ++ arch/arm/dts/k3-j784s4-mcu-wakeup.dtsi | 311 + arch/arm/dts/k3-j784s4-r5-evm.dts | 209 + arch/arm/dts/k3-j784s4.dtsi | 287 + arch/arm/mach-k3/Kconfig | 16 +- arch/arm/mach-k3/Makefile | 2 + arch/arm/mach-k3/arm64-mmu.c | 41 + arch/arm/mach-k3/include/mach/hardware.h | 4 + .../mach-k3/include/mach/j784s4_hardware.h | 41 + arch/arm/mach-k3/include/mach/j784s4_spl.h | 46 + arch/arm/mach-k3/include/mach/spl.h | 6 +- arch/arm/mach-k3/j784s4/Makefile | 5 + arch/arm/mach-k3/j784s4/clk-data.c | 428 + arch/arm/mach-k3/j784s4/dev-data.c | 97 + arch/arm/mach-k3/j784s4_init.c | 319 + board/ti/j784s4/Kconfig | 61 + board/ti/j784s4/MAINTAINERS | 7 + board/ti/j784s4/Makefile | 8 + board/ti/j784s4/evm.c | 105 + board/ti/j784s4/j784s4.env | 108 + configs/j784s4_evm_a72_defconfig | 213 + configs/j784s4_evm_r5_defconfig | 179 + drivers/clk/ti/clk-k3.c | 6 + drivers/dma/ti/Makefile | 1 + drivers/dma/ti/k3-psil-j784s4.c | 166 + drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 2 + drivers/firmware/ti_sci_static_data.h | 35 + drivers/power/domain/ti-power-domain.c | 6 + drivers/ram/Kconfig | 2 +- drivers/soc/soc_ti_k3.c | 6 + include/configs/j784s4_evm.h | 49 + include/dt-bindings/mux/ti-serdes.h | 62 + include/dt-bindings/pinctrl/k3.h | 3 + include/k3-clk.h | 1 + include/k3-dev.h | 1 + 41 files changed, 21781 insertions(+), 8 deletions(-) create mode 100644 arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi create mode 100644 arch/arm/dts/k3-j784s4-ddr.dtsi create mode 100644 arch/arm/dts/k3-j784s4-evm-u-boot.dtsi create mode 100644 arch/arm/dts/k3-j784s4-evm.dts create mode 100644 arch/arm/dts/k3-j784s4-main.dtsi create mode 100644 arch/arm/dts/k3-j784s4-mcu-wakeup.dtsi create mode 100644 arch/arm/dts/k3-j784s4-r5-evm.dts create mode 100644 arch/arm/dts/k3-j784s4.dtsi create mode 100644 arch/arm/mach-k3/include/mach/j784s4_hardware.h create mode 100644 arch/arm/mach-k3/include/mach/j784s4_spl.h create mode 100644 arch/arm/mach-k3/j784s4/Makefile create mode 100644 arch/arm/mach-k3/j784s4/clk-data.c create mode 100644 arch/arm/mach-k3/j784s4/dev-data.c create mode 100644 arch/arm/mach-k3/j784s4_init.c create mode 100644 board/ti/j784s4/Kconfig create mode 100644 board/ti/j784s4/MAINTAINERS create mode 100644 board/ti/j784s4/Makefile create mode 100644 board/ti/j784s4/evm.c create mode 100644 board/ti/j784s4/j784s4.env create mode 100644 configs/j784s4_evm_a72_defconfig create mode 100644 configs/j784s4_evm_r5_defconfig create mode 100644 drivers/dma/ti/k3-psil-j784s4.c create mode 100644 include/configs/j784s4_evm.h -- 2.17.1

8 21

[PATCH 0/1] lib/vsprintf.c: fix integer overflow in vsprintf
by Ying-Chun Liu (PaulLiu) 18 Aug '23

18 Aug '23

vsnprintf_internal() adds 'size' to 'buf' and vsprintf() sets 'size' to 'INT_MAX' which can overflow. This causes sprintf() to fail when initializing the environment on 8GB. Instead of using 'INT_MAX', we use SIZE_MAX - buf, which is the largest possible string that could fit without overflowing 'size'. Tom Cherry (1): lib/vsprintf.c: fix integer overflow in vsprintf lib/vsprintf.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) -- 2.39.2

5 5

[PATCH 0/6] introduce Arm FF-A support
by abdellatif.elkhlifi＠arm.com 17 Aug '23

17 Aug '23

From: Abdellatif El Khlifi <abdellatif.elkhlifi(a)arm.com> This patchset adds support for Arm FF-A (Arm Firmware Framework for Armv8-A v1.0). FF-A support is generic by design and can be used by any Arm platform. The features added are as follows: 1/ FF-A device driver 2/ armffa command 3/ FF-A Sandbox driver 4/ FF-A Sandbox test cases 5/ FF-A MM communication The suggested design sees FF-A as a data bus allowing data exchange with the firmware running under TrustZone HW (such as Optee). The same approach was followed in the FF-A driver in Linux kernel (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/dri… u-boot boards using FF-A can provide a device tree node in a <board>-u-boot.dtsi file. Since the node can not be hosted in Linux device tree, we suggest using u-boot device tree. As a use case, we will send a commit enabling FF-A for the Corstone-1000 platform and providing the FF-A node in u-boot.dtsi files. Corstone-1000: https://lore.kernel.org/u-boot/20220322104118.573537-1-rui.silva@linaro.org/ Cc: Tom Rini <trini(a)konsulko.com> Abdellatif El Khlifi (6): arm_ffa: introduce Arm FF-A low-level driver arm_ffa: introduce armffa command arm_ffa: introduce the FF-A Sandbox driver arm_ffa: introduce Sandbox test cases for UCLASS_FFA arm_ffa: introduce armffa command Sandbox test arm_ffa: introduce FF-A MM communication MAINTAINERS | 15 + arch/arm/cpu/armv8/cache.S | 16 + arch/arm/cpu/armv8/cache_v8.c | 3 +- arch/arm/cpu/armv8/smccc-call.S | 27 + arch/arm/lib/asm-offsets.c | 6 + arch/sandbox/dts/sandbox.dtsi | 10 + arch/sandbox/dts/test.dts | 10 + cmd/Kconfig | 10 + cmd/Makefile | 2 + cmd/armffa.c | 266 +++++ common/board_r.c | 7 + configs/sandbox64_defconfig | 2 + configs/sandbox_defconfig | 2 + doc/arch/sandbox.rst | 1 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/arm-ffa/Kconfig | 32 + drivers/arm-ffa/Makefile | 7 + drivers/arm-ffa/arm-ffa-uclass.c | 102 ++ drivers/arm-ffa/arm_ffa_prv.h | 200 ++++ drivers/arm-ffa/core.c | 1463 +++++++++++++++++++++++++ drivers/arm-ffa/sandbox.c | 735 +++++++++++++ drivers/arm-ffa/sandbox_arm_ffa_prv.h | 128 +++ include/arm_ffa.h | 197 ++++ include/arm_ffa_helper.h | 45 + include/dm/uclass-id.h | 1 + include/linux/arm-smccc.h | 28 +- include/mm_communication.h | 4 +- include/sandbox_arm_ffa.h | 31 + include/sandbox_arm_ffa_helper.h | 26 + lib/Kconfig | 1 + lib/Makefile | 1 + lib/arm-ffa/Kconfig | 6 + lib/arm-ffa/Makefile | 9 + lib/arm-ffa/arm_ffa_helper.c | 188 ++++ lib/arm-ffa/sandbox_arm_ffa_helper.c | 23 + lib/efi_loader/Kconfig | 14 +- lib/efi_loader/efi_boottime.c | 17 + lib/efi_loader/efi_variable_tee.c | 294 ++++- test/cmd/Makefile | 1 + test/cmd/armffa.c | 33 + test/cmd/armffa.h | 13 + test/dm/Makefile | 1 + test/dm/ffa.c | 424 +++++++ test/dm/ffa.h | 22 + 45 files changed, 4415 insertions(+), 11 deletions(-) create mode 100644 cmd/armffa.c create mode 100644 drivers/arm-ffa/Kconfig create mode 100644 drivers/arm-ffa/Makefile create mode 100644 drivers/arm-ffa/arm-ffa-uclass.c create mode 100644 drivers/arm-ffa/arm_ffa_prv.h create mode 100644 drivers/arm-ffa/core.c create mode 100644 drivers/arm-ffa/sandbox.c create mode 100644 drivers/arm-ffa/sandbox_arm_ffa_prv.h create mode 100644 include/arm_ffa.h create mode 100644 include/arm_ffa_helper.h create mode 100644 include/sandbox_arm_ffa.h create mode 100644 include/sandbox_arm_ffa_helper.h create mode 100644 lib/arm-ffa/Kconfig create mode 100644 lib/arm-ffa/Makefile create mode 100644 lib/arm-ffa/arm_ffa_helper.c create mode 100644 lib/arm-ffa/sandbox_arm_ffa_helper.c create mode 100644 test/cmd/armffa.c create mode 100644 test/cmd/armffa.h create mode 100644 test/dm/ffa.c create mode 100644 test/dm/ffa.h -- 2.17.1

12 477

[PATCH] odroid_xu3: Fix board environment variable
by Tom Rini 14 Aug '23

14 Aug '23

When migrating CONFIG_CONS_INDEX to Kconfig, on this platform we changed what "board" evaluated to in the environment. This in turn meant that we would no longer try and find the correct fdtfile via the normal distro boot logic. Fix this by overriding board in the default environment, as done on other platforms where CONFIG_SYS_BOARD is not what we want to be in the board environment variable. Fixes: f76750d11133 ("Convert CONFIG_CONS_INDEX et al to Kconfig") Reported-by: Gabriel Hojda <ghojda(a)yo2urs.ro> Tested-by: Gabriel Hojda <ghojda(a)yo2urs.ro> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- include/configs/odroid_xu3.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index eb35d7b4ae2d..360815bc03ee 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -86,6 +86,7 @@ "rootfstype=ext4\0" \ "console=console=ttySAC2,115200n8\0" \ "fdtfile=exynos5422-odroidxu3.dtb\0" \ + "board=odroid\0" \ "board_name=odroidxu3\0" \ "mmcbootdev=0\0" \ "mmcrootdev=0\0" \ -- 2.25.1

2 3

[PATCH v3 00/23] CONFIG_IS_ENABLED vs IS_ENABLED
by Troy Kisky 11 Aug '23

11 Aug '23

This patch set gets ready to checks the usage of CONFIG_IS_ENABLED/IS_ENABLED. After the set has been applied, you can delete test/usage_of_is_enabled_todo.txt and run test/usage_of_is_enabled_commit.sh The script test/usage_of_is_enabled_check.sh checks for new questionable uses of CONFIG_IS_ENABLED/IS_ENABLED and is added to .azure-pipelines.yml, and .gitlab-ci.yml version 3 changes: Dropped changes to puma-rk3399 and ringneck-px30 in favor of Quentin Schulz's patch https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… https://patchwork.ozlabs.org/project/uboot/patch/20230301-tsd-env-nowhere-k… Please apply them before this series. Drop gateworks: venice: Always define setup_fec and setup_eqos Drop arm: cpu: armv7: ls102xa: fdt: remove eth_device support Simon's patches took care of these Add to todo list, these new questionable uses that snuck into the code. PARTITION_TYPE_GUID PHY_ATHEROS RTC_SANDBOX Changes in v3: remove error entirely and prevent with Kconfig new patch to address Tom's concerns - Rebase on Simon's s/CMD_SATA/SATA/ change - commit message updated Changes in v2: - new patch - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - delay include of linux/kconfig.h to do from Makefile - as suggested by Simon - include linux/kconfig.h from tools/Makefile - as suggested by Simon - changed condition of when to include field bdf - added protection to another instance of bdf in uart.c - Thanks to Simon for getting this corrected - use normal if, not preprocessor - new in series - use an accessor function gd_set_pci_ram_top Troy Kisky (23): kconfig: add IS_ENABLED_NOCHECK to bypass usage_of_is_enabled_check cmd: nvedit: remove error check, handle with Kconfig lib: crc32: prepare for CONFIG_IS_ENABLED changes lib: md5: prepare for CONFIG_IS_ENABLED changes lib: sha1: prepare for CONFIG_IS_ENABLED changes lib: sha256: prepare for CONFIG_IS_ENABLED changes lib: sha512: prepare for CONFIG_IS_ENABLED changes watchdog: add and use Kconfig HAS_WATCHDOG_RUNNING tools: prevent CONFIG_IS_ENABLED errors by including linux/kconfig.h tools: Makefile: prepare for CONFIG_IS_ENABLED changes by adding CONFIG_TOOLS_xxx x86: cpu: qemu: qemu: remove SPL use with CONFIG_IS_ENABLED config_distro_bootcmd: remove booting environment variables from SPL environment ofnode: fdt_support definitions needed if OF_CONTROL is enabled fdt_support: always define fdt_fixup_mtdparts m53menlo: define ft_board_setup only if CONFIG_IS_ENABLED(OF_LIBFDT) freescale: common: pfuze: define pfuze_mode_init only if defined(CONFIG_DM_PMIC) ns16550: match when to define bdf with uart code solidrun: mx6cuboxi: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA wandboard: use CONFIG_IS_ENABLED(SATA) instead of ifdef CONFIG_SATA arm: mach-imx: use CONFIG_$(SPL_)SATA instead of CONFIG_SATA x86: cpu: i386: cpu: only set pci_ram_top if CONFIG_IS_ENABLED(PCI) power: pmic: add dm style definitions if not CONFIG_IS_ENABLED(POWER_LEGACY) CI: add test/usage_of_is_enabled_check.sh .azure-pipelines.yml | 11 ++ .gitlab-ci.yml | 5 + arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-omap2/boot-common.c | 5 +- arch/m68k/lib/time.c | 7 +- arch/powerpc/lib/interrupts.c | 5 +- arch/powerpc/lib/ticks.S | 2 +- arch/x86/cpu/apollolake/uart.c | 4 + arch/x86/cpu/i386/cpu.c | 2 +- arch/x86/cpu/qemu/qemu.c | 2 +- board/astro/mcf5373l/fpga.c | 10 +- board/freescale/common/pfuze.c | 2 +- board/menlo/m53menlo/m53menlo.c | 2 + board/solidrun/mx6cuboxi/mx6cuboxi.c | 5 +- board/wandboard/wandboard.c | 5 +- boot/image-board.c | 2 +- cmd/nvedit.c | 32 +--- cmd/ximg.c | 10 +- common/board_f.c | 4 +- common/spl/Kconfig | 4 + drivers/crypto/aspeed/aspeed_hace.c | 2 +- drivers/crypto/hash/hash_sw.c | 2 +- drivers/timer/mpc83xx_timer.c | 5 +- drivers/watchdog/Kconfig | 3 + env/Kconfig | 17 ++- fs/cramfs/uncompress.c | 9 +- include/asm-generic/global_data.h | 6 + include/config_distro_bootcmd.h | 23 +++ include/fdt_support.h | 26 ++-- include/linux/kconfig.h | 5 + include/ns16550.h | 2 +- include/power/pmic.h | 2 +- include/watchdog.h | 7 +- lib/bzip2/bzlib.c | 5 +- lib/bzip2/bzlib_decompress.c | 20 +-- lib/crc32.c | 11 +- lib/md5.c | 7 +- lib/sha1.c | 7 +- lib/sha256.c | 7 +- lib/sha512.c | 11 +- test/usage_of_is_enabled_check.sh | 19 +++ test/usage_of_is_enabled_commit.sh | 12 ++ test/usage_of_is_enabled_correct.sh | 50 +++++++ test/usage_of_is_enabled_exempt.txt | 9 ++ test/usage_of_is_enabled_list.sh | 86 +++++++++++ test/usage_of_is_enabled_splcfg.txt | 21 +++ test/usage_of_is_enabled_todo.txt | 213 +++++++++++++++++++++++++++ tools/Makefile | 3 + 48 files changed, 584 insertions(+), 127 deletions(-) create mode 100755 test/usage_of_is_enabled_check.sh create mode 100755 test/usage_of_is_enabled_commit.sh create mode 100755 test/usage_of_is_enabled_correct.sh create mode 100644 test/usage_of_is_enabled_exempt.txt create mode 100755 test/usage_of_is_enabled_list.sh create mode 100644 test/usage_of_is_enabled_splcfg.txt create mode 100644 test/usage_of_is_enabled_todo.txt -- 2.34.1

4 43

[PATCH v9 0/6] tpm: Support boot measurements
by Eddie James 07 Aug '23

07 Aug '23

This series adds support for measuring the boot images more generically than the existing EFI support. Several EFI functions have been moved to the TPM layer. The series includes optional measurement from the bootm command. A new test case has been added for the bootm measurement to test the new path, and the sandbox TPM2 driver has been updated to support this use case. This series is based on Ilias' auto-startup series and Simon's additions. Changes since v8: - Fix a sandbox driver off-by-one error in checking the property type. - Fix log parsing again - any data corruption seen while replaying the event log was failing the entire measurement. - Added an option to ignore the existing log and a configuration option for systems to select that for the bootm measurement. This would only be selected for systems that know that U-Boot is the first stage bootloader. This is necessary because the reserved memory region may persist through resets and so U-Boot attempts to append to the previous boot's log. Changes since v7: - Change name of tcg2_init_log and add more documentation - Add a check, when parsing the event log header, to ensure that the previous stage bootloader used all the active PCRs. - Change name of tcg2_log_find_end - Fix the greater than or equal to check to exit the log parsing - Make sure log_position is 0 if there is any error discovering the log - Return errors parsing the log if the data is corrupt so that we don't end up with half a log Changes since v6: - Added comment for bootm_measure - Fixed line length in bootm_measure - Added Linaro copyright for all the EFI moved code - Changed tcg2_init_log (and by extension, tcg2_measurement_init) to copy any discovered event log to the user's log if passed in. Changes since v5: - Re-ordered the patches to put the sandbox TPM driver patch second - Remove unused platform_get_eventlog in efi_tcg2.c - First look for tpm_event_log_* properties instead of linux,sml-* - Fix efi_tcg2.c compilation - Select SHA* configs - Remove the !SANDBOX dependency for EFI TCG2 - Only compile in the measurement u-boot command when CONFIG_MEASURED_BOOT is enabled Changes since v4: - Remove tcg2_measure_event function and check for NULL data in tcg2_measure_data - Use tpm_auto_startup - Fix efi_tcg2.c compilation for removing tcg2_pcr_read function - Change PCR indexes for initrd and dtb - Drop u8 casting in measurement test - Use bullets in documentation Changes since v3: - Reordered headers - Refactored more of EFI code into common code Removed digest_info structure and instead used the common alg_to_mask and alg_to_len Improved event log parsing in common code to get it equivalent to EFI Common code now extends PCR if previous bootloader stage couldn't No need to allocate memory in the common code, so EFI copies the discovered buffer like it did before Rename efi measure_event function Changes since v2: - Add documentation. - Changed reserved memory address to the top of the RAM for sandbox dts. - Add measure state to booti and bootz. - Skip measurement for EFI images that should be measured Changes since v1: - Refactor TPM layer functions to allow EFI system to use them, and remove duplicate EFI functions. - Add test case - Drop #ifdefs for bootm - Add devicetree measurement config option - Update sandbox TPM driver Eddie James (6): tpm: Fix spelling for tpmu_ha union tpm: sandbox: Update for needed TPM2 capabilities tpm: Support boot measurements bootm: Support boot measurement test: Add sandbox TPM boot measurement doc: Add measured boot documentation arch/sandbox/dts/sandbox.dtsi | 13 + arch/sandbox/dts/test.dts | 13 + boot/Kconfig | 32 + boot/bootm.c | 74 +++ cmd/booti.c | 1 + cmd/bootm.c | 2 + cmd/bootz.c | 1 + configs/sandbox_defconfig | 1 + doc/usage/index.rst | 1 + doc/usage/measured_boot.rst | 23 + drivers/tpm/tpm2_tis_sandbox.c | 100 ++- include/bootm.h | 11 + include/efi_tcg2.h | 44 -- include/image.h | 1 + include/test/suites.h | 1 + include/tpm-v2.h | 263 +++++++- lib/Kconfig | 4 + lib/efi_loader/Kconfig | 2 - lib/efi_loader/efi_tcg2.c | 1054 +++----------------------------- lib/tpm-v2.c | 814 ++++++++++++++++++++++++ test/boot/Makefile | 1 + test/boot/measurement.c | 66 ++ test/cmd_ut.c | 4 + 23 files changed, 1473 insertions(+), 1053 deletions(-) create mode 100644 doc/usage/measured_boot.rst create mode 100644 test/boot/measurement.c -- 2.31.1

3 15

[PATCH] freescale: Remove Rajesh Bhagat MAINTAINERS
by Sean Anderson 03 Aug '23

03 Aug '23

Rajesh's email bounces. Remove his email from all boards he maintains. Fortunately, he has co-maintainers on most boards. I have taken the liberty of volunteering Pramod to maintain the LS1012AFRDM, since he also maintains the LS1012AFRWY. Let me know if the board should be orphaned instead. Signed-off-by: Sean Anderson <sean.anderson(a)seco.com> --- board/freescale/ls1012afrdm/MAINTAINERS | 2 +- board/freescale/ls1012aqds/MAINTAINERS | 1 - board/freescale/ls1012ardb/MAINTAINERS | 1 - board/freescale/ls1028a/MAINTAINERS | 2 -- board/freescale/ls1043aqds/MAINTAINERS | 1 - board/freescale/ls1043ardb/MAINTAINERS | 1 - board/freescale/ls1046aqds/MAINTAINERS | 1 - board/freescale/ls1046ardb/MAINTAINERS | 1 - board/freescale/ls1088a/MAINTAINERS | 2 -- board/freescale/ls2080aqds/MAINTAINERS | 1 - board/freescale/ls2080ardb/MAINTAINERS | 1 - 11 files changed, 1 insertion(+), 13 deletions(-) diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS index 5fc7e93850e..89d1085b00b 100644 --- a/board/freescale/ls1012afrdm/MAINTAINERS +++ b/board/freescale/ls1012afrdm/MAINTAINERS @@ -1,5 +1,5 @@ LS1012AFRDM BOARD -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> +M: Pramod Kumar <pramod.kumar_1(a)nxp.com> S: Maintained F: board/freescale/ls1012afrdm/ F: include/configs/ls1012afrdm.h diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS index c1bb8d51508..eabf5805765 100644 --- a/board/freescale/ls1012aqds/MAINTAINERS +++ b/board/freescale/ls1012aqds/MAINTAINERS @@ -1,5 +1,4 @@ LS1012AQDS BOARD -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Pramod Kumar <pramod.kumar_1(a)nxp.com> S: Maintained F: board/freescale/ls1012aqds/ diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS index b0c008b5fc9..ce2f9a16cc7 100644 --- a/board/freescale/ls1012ardb/MAINTAINERS +++ b/board/freescale/ls1012ardb/MAINTAINERS @@ -1,5 +1,4 @@ LS1012ARDB BOARD -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Pramod Kumar <pramod.kumar_1(a)nxp.com> S: Maintained F: board/freescale/ls1012ardb/ diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS index 9e7b0697ff6..551f6a08651 100644 --- a/board/freescale/ls1028a/MAINTAINERS +++ b/board/freescale/ls1028a/MAINTAINERS @@ -1,5 +1,4 @@ LS1028AQDS BOARD -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Tang Yuantian <andy.tang(a)nxp.com> S: Maintained F: board/freescale/ls1028a/ @@ -9,7 +8,6 @@ F: configs/ls1028aqds_tfa_defconfig F: configs/ls1028aqds_tfa_lpuart_defconfig LS1028ARDB BOARD -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Tang Yuantian <andy.tang(a)nxp.com> S: Maintained F: board/freescale/ls1028a/ diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS index 9fb6cc85cd0..f7420ecd303 100644 --- a/board/freescale/ls1043aqds/MAINTAINERS +++ b/board/freescale/ls1043aqds/MAINTAINERS @@ -1,6 +1,5 @@ LS1043AQDS BOARD M: Mingkai Hu <mingkai.hu(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1043aqds/ F: include/configs/ls1043aqds.h diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS index 36e7331538f..9bbec4d9acc 100644 --- a/board/freescale/ls1043ardb/MAINTAINERS +++ b/board/freescale/ls1043ardb/MAINTAINERS @@ -1,6 +1,5 @@ LS1043A BOARD M: Mingkai Hu <mingkai.hu(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1043ardb/ F: board/freescale/ls1043ardb/ls1043ardb.c diff --git a/board/freescale/ls1046aqds/MAINTAINERS b/board/freescale/ls1046aqds/MAINTAINERS index 72c4253fcf5..e1db2aaa8e4 100644 --- a/board/freescale/ls1046aqds/MAINTAINERS +++ b/board/freescale/ls1046aqds/MAINTAINERS @@ -1,6 +1,5 @@ LS1046AQDS BOARD M: Mingkai Hu <Mingkai.Hu(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1046aqds/ F: include/configs/ls1046aqds.h diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS index 3c8cfe720dc..d5a6b261519 100644 --- a/board/freescale/ls1046ardb/MAINTAINERS +++ b/board/freescale/ls1046ardb/MAINTAINERS @@ -1,6 +1,5 @@ LS1046A BOARD M: Mingkai Hu <mingkai.hu(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1046ardb/ F: board/freescale/ls1046ardb/ls1046ardb.c diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS index 5c7925a95f4..95a14149e4f 100644 --- a/board/freescale/ls1088a/MAINTAINERS +++ b/board/freescale/ls1088a/MAINTAINERS @@ -1,6 +1,5 @@ LS1088ARDB BOARD M: Ashish Kumar <Ashish.Kumar(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1088a/ F: include/configs/ls1088ardb.h @@ -11,7 +10,6 @@ F: configs/ls1088ardb_tfa_SECURE_BOOT_defconfig LS1088AQDS BOARD M: Ashish Kumar <Ashish.Kumar(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> S: Maintained F: board/freescale/ls1088a/ F: include/configs/ls1088aqds.h diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS index 39d02ae3f46..fdad199ec25 100644 --- a/board/freescale/ls2080aqds/MAINTAINERS +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -1,6 +1,5 @@ LS2080A BOARD M: Priyanka Jain <priyanka.jain(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Wasim Khan <wasim.khan(a)nxp.com> S: Maintained F: board/freescale/ls2080aqds/ diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS index f49d26af3a0..f2f834ffbd9 100644 --- a/board/freescale/ls2080ardb/MAINTAINERS +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -10,7 +10,6 @@ F: configs/ls2080ardb_nand_defconfig LS2088A_QSPI-boot BOARD M: Priyanka Jain <priyanka.jain(a)nxp.com> -M: Rajesh Bhagat <rajesh.bhagat(a)nxp.com> M: Wasim Khan <wasim.khan(a)nxp.com> S: Maintained F: configs/ls2088ardb_qspi_defconfig -- 2.35.1.1320.gc452695387.dirty

2 5