March 2023 - U-Boot

[ANN] U-Boot v2023.04-rc4 released
by Tom Rini 14 Mar '23

14 Mar '23

Hey all, It's the scheduled day for -rc4, and once again it's the end of my day. The delta between -rc3 and -rc4 is about what I would hope for. I still hope to see a PR to fix m68k, and to address some mpc8xx problems as well, but other than that I do hope for a quiet cycle. The next branch feels like it's working to me at least, so feedback on that would be appreciated. In terms of a changelog, git log --merges v2023.04-rc3..v2023.04-rc4 contains what I've pulled but as always, better PR messages and tags will provide better results here. Continuing on schedule now and that means one more -rc on the 27th and final release on April 3rd, 2023. Thanks all! -- Tom

2 4

"bootelf -p" loads every segement without checking its type
by 黄晨曦 14 Mar '23

14 Mar '23

Hello, I am making a toy OS kernel on RISC-V platform. The kernel image I built is a ELF file that should be booted using U-Boot's bootelf command. However, I was getting such error when doing bootelf -p <memory address of my ELF file at memory>: Unhandled exception: Store/AMO access fault My kernel file is a 64-bit ELF file with the structure of: (the full readelf report is attached in the email) ``` Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align RISCV_ATTRIBUT 0x000000000000c7a0 0x0000000000000000 0x0000000000000000 0x0000000000000039 0x0000000000000000 R 0x1 LOAD 0x0000000000001000 0x0000000080200000 0x0000000080200000 0x0000000000001000 0x0000000000001000 R 0x1000 LOAD 0x0000000000002000 0x0000000080201000 0x0000000080201000 0x000000000000a7a0 0x0000000000012890 RWE 0x1000 GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 RW 0x10 Section to Segment mapping: Segment Sections... 00 .riscv.attributes 01 .entry 02 .text .rodata .data .bss 03 ``` The function for loading x64 ELF file to the memory is "unsigned long load_elf64_image_phdr(unsigned long addr)" at lib/elf.c. As I looked into it, the function enumerate every segment and load the segment to the memory. The real problem is that not every segment has to be loaded into the memory. The segment should be loaded if and only if its type is "LOAD". In another words, the function should check "phdr->p_type" first before loading the segment. I have also looked up codes in QEMU. QEMU has "-kernel" option to load image file directly to the memory, which supports ELF file loading. QEMU checks "phdr->p_type" before loading segments. Regards, Chenxi Huang ------------ Background Information: * Linux 5.19.0-35-generic #36~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Feb 17 15:17:25 UTC 2 x86_64 x86_64 x86_64 GNU/Linux * RISC-V GNU Toolchain Version: v2023.01.31 65056bd@riscv-collab/riscv-gnu-toolchain * U-Boot f8f47e6f

1 0

next: Pull request efi-next-20230313
by Heinrich Schuchardt 14 Mar '23

14 Mar '23

The following changes since commit bcf343146ff365a88481b9a80920ed146c6dee5b: Merge tag 'dm-next-9mar23' of https://source.denx.de/u-boot/custodians/u-boot-dm into next (2023-03-09 11:22:50 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-next-20230313 for you to fetch changes up to 61a621054194216eefc1a6f5af0a63aa265bbaef: video: Add a note about the broken implementation (2023-03-13 13:53:01 +0100) Gitlab CI showed no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/15571 ---------------------------------------------------------------- Pull request efi-next-20230313 UEFI: * Improve graphics support in EFI app Others: * x86: Add a few more items to bdinfo * video: Remove duplicate cursor-positioning function * video: Clear the vidconsole rather than the video ---------------------------------------------------------------- Simon Glass (13): efi: video: Move payload code into a function efi: video: Return mode info for app also efi: Support a 64-bit frame buffer address x86: Add a few more items to bdinfo efi: Use a fixed value for the timer clock efi: Support copy framebuffer video: Allow a copy framebuffer with pre-allocated fb bbinfo: Show the size of the copy framebuffer efi: Adjust script to show pre-relocation output on terminal video: Remove duplicate cursor-positioning function video: Clear the vidconsole rather than the video efi: Add dhrystone, dcache and scroll lines to app video: Add a note about the broken implementation arch/x86/dts/efi-x86_app.dts | 1 + arch/x86/lib/bdinfo.c | 6 ++ arch/x86/lib/fsp/fsp_graphics.c | 2 +- cmd/bdinfo.c | 11 ++- cmd/cls.c | 20 ++++-- configs/efi-x86_app64_defconfig | 3 + drivers/pci/pci_rom.c | 10 +-- drivers/timer/tsc_timer.c | 9 +++ drivers/video/coreboot.c | 2 +- drivers/video/efi.c | 138 ++++++++++++++++++++++++++++---------- drivers/video/vidconsole-uclass.c | 48 +++++-------- drivers/video/video-uclass.c | 32 ++++++--- include/init.h | 3 + include/vesa.h | 16 ++++- include/video.h | 2 + include/video_console.h | 9 +++ scripts/build-efi.sh | 2 + 17 files changed, 228 insertions(+), 86 deletions(-)

2 1

[PATCH v2 1/2] configs: j721s2: merge HS and non-HS defconfigs
by Manorit Chawdhry 14 Mar '23

14 Mar '23

K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS devices these can be ignored. Signed-off-by: Manorit Chawdhry <m-chawdhry(a)ti.com> Acked-by: Andrew Davis <afd(a)ti.com> --- v1->v2: update MAINTAINERS MAINTAINERS | 2 - configs/j721s2_evm_a72_defconfig | 3 +- configs/j721s2_evm_r5_defconfig | 1 + configs/j721s2_hs_evm_a72_defconfig | 213 ---------------------------- configs/j721s2_hs_evm_r5_defconfig | 176 ----------------------- 5 files changed, 3 insertions(+), 392 deletions(-) delete mode 100644 configs/j721s2_hs_evm_a72_defconfig delete mode 100644 configs/j721s2_hs_evm_r5_defconfig diff --git a/MAINTAINERS b/MAINTAINERS index b9c505d5faa7..bdea0704adc0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1457,8 +1457,6 @@ F: configs/j7200_hs_evm_a72_defconfig F: configs/j7200_hs_evm_r5_defconfig F: configs/j721e_hs_evm_a72_defconfig F: configs/j721e_hs_evm_r5_defconfig -F: configs/j721s2_hs_evm_a72_defconfig -F: configs/j721s2_hs_evm_r5_defconfig TPM DRIVERS M: Ilias Apalodimas <ilias.apalodimas(a)linaro.org> diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 84b4fb083191..c880a8d37158 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_K3=y +CONFIG_TI_SECURE_DEVICE=y CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL_GPIO=y @@ -32,7 +33,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;" CONFIG_LOGLEVEL=7 CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index 1f2102a9f91f..51f2da66c9d1 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_K3=y +CONFIG_TI_SECURE_DEVICE=y CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SYS_MALLOC_F_LEN=0x10000 CONFIG_SPL_GPIO=y diff --git a/configs/j721s2_hs_evm_a72_defconfig b/configs/j721s2_hs_evm_a72_defconfig deleted file mode 100644 index 9fc90737da80..000000000000 --- a/configs/j721s2_hs_evm_a72_defconfig +++ /dev/null @@ -1,213 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_K3=y -CONFIG_TI_SECURE_DEVICE=y -CONFIG_SYS_MALLOC_LEN=0x2000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_SOC_K3_J721S2=y -CONFIG_TARGET_J721S2_A72_EVM=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0x680000 -CONFIG_DM_GPIO=y -CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-common-proc-board" -CONFIG_SPL_TEXT_BASE=0x80080000 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_ENV_OFFSET_REDUND=0x6A0000 -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -# CONFIG_PSCI_RESET is not set -CONFIG_DISTRO_DEFAULTS=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_LOAD_FIT=y -CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -# CONFIG_USE_SPL_FIT_GENERATOR is not set -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit" -CONFIG_LOGLEVEL=7 -CONFIG_SPL_MAX_SIZE=0xc0000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80a00000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 -CONFIG_SPL_DMA=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" -CONFIG_SPL_I2C=y -CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_DM_SPI_FLASH=y -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -# CONFIG_SPL_SPI_FLASH_TINY is not set -CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 -CONFIG_SPL_THERMAL=y -CONFIG_SPL_USB_GADGET=y -CONFIG_SPL_DFU=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_SYS_MAXARGS=64 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_MTD=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_UFS=y -CONFIG_CMD_USB=y -CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus" -CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),-@8m(hbmc.rootfs)" -CONFIG_CMD_UBI=y -# CONFIG_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_SPL_MULTI_DTB_FIT=y -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y -CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y -CONFIG_SPL_OF_TRANSLATE=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_CLK_CCF=y -CONFIG_CLK_TI_SCI=y -CONFIG_DFU_MMC=y -CONFIG_DFU_RAM=y -CONFIG_DFU_SF=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 -CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 -CONFIG_DMA_CHANNELS=y -CONFIG_TI_K3_NAVSS_UDMA=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_FASTBOOT_BUF_SIZE=0x2F000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -CONFIG_TI_SCI_PROTOCOL=y -CONFIG_DA8XX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_DM_I2C_GPIO=y -CONFIG_SYS_I2C_OMAP24XX=y -CONFIG_DM_MAILBOX=y -CONFIG_K3_SEC_PROXY=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_IO_VOLTAGE=y -CONFIG_MMC_UHS_SUPPORT=y -CONFIG_MMC_HS400_SUPPORT=y -CONFIG_SPL_MMC_HS400_SUPPORT=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ADMA=y -CONFIG_SPL_MMC_SDHCI_ADMA=y -CONFIG_MMC_SDHCI_AM654=y -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_SHOW_PROGRESS=0 -CONFIG_CFI_FLASH=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPI_FLASH_SOFT_RESET=y -CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_MT35XU=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_SPI_FLASH_MTD=y -CONFIG_MULTIPLEXER=y -CONFIG_MUX_MMIO=y -CONFIG_PHY_TI_DP83867=y -CONFIG_PHY_FIXED=y -CONFIG_TI_AM65_CPSW_NUSS=y -CONFIG_PHY=y -CONFIG_SPL_PHY=y -CONFIG_PHY_CADENCE_TORRENT=y -CONFIG_PHY_J721E_WIZ=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_GENERIC is not set -CONFIG_SPL_PINCTRL=y -# CONFIG_SPL_PINCTRL_GENERIC is not set -CONFIG_PINCTRL_SINGLE=y -CONFIG_POWER_DOMAIN=y -CONFIG_TI_SCI_POWER_DOMAIN=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_REGULATOR_GPIO=y -CONFIG_RAM=y -CONFIG_SPL_RAM=y -CONFIG_REMOTEPROC_TI_K3_DSP=y -CONFIG_REMOTEPROC_TI_K3_R5F=y -CONFIG_DM_RESET=y -CONFIG_RESET_TI_SCI=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_SOC_DEVICE=y -CONFIG_SOC_DEVICE_TI_K3=y -CONFIG_SOC_TI=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_CADENCE_QSPI=y -CONFIG_HAS_CQSPI_REF_CLK=y -CONFIG_CQSPI_REF_CLK=133333333 -CONFIG_SYSRESET=y -CONFIG_SPL_SYSRESET=y -CONFIG_SYSRESET_TI_SCI=y -CONFIG_DM_THERMAL=y -CONFIG_USB=y -CONFIG_DM_USB_GADGET=y -CONFIG_SPL_DM_USB_GADGET=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_CDNS3=y -CONFIG_USB_CDNS3_GADGET=y -CONFIG_USB_CDNS3_HOST=y -CONFIG_SPL_USB_CDNS3_GADGET=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0x6168 -CONFIG_UFS=y -CONFIG_CADENCE_UFS=y -CONFIG_TI_J721E_UFS=y -CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/j721s2_hs_evm_r5_defconfig b/configs/j721s2_hs_evm_r5_defconfig deleted file mode 100644 index d9988fc17fc7..000000000000 --- a/configs/j721s2_hs_evm_r5_defconfig +++ /dev/null @@ -1,176 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_K3=y -CONFIG_TI_SECURE_DEVICE=y -CONFIG_SYS_MALLOC_LEN=0x2000000 -CONFIG_SYS_MALLOC_F_LEN=0x10000 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SOC_K3_J721S2=y -CONFIG_K3_EARLY_CONS=y -CONFIG_TARGET_J721S2_R5_EVM=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_DM_GPIO=y -CONFIG_SPL_DM_SPI=y -CONFIG_DEFAULT_DEVICE_TREE="k3-j721s2-r5-common-proc-board" -CONFIG_SPL_TEXT_BASE=0x41c00000 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL_SIZE_LIMIT=0x80000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c76000 -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_LOAD_FIT=y -CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 -# CONFIG_USE_SPL_FIT_GENERATOR is not set -CONFIG_USE_BOOTCOMMAND=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y -CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y -CONFIG_SPL_MAX_SIZE=0xc0000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x41c76000 -CONFIG_SPL_BSS_MAX_SIZE=0xa000 -CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 -CONFIG_SPL_EARLY_BSS=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 -CONFIG_SPL_DMA=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C=y -CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_DM_SPI_FLASH=y -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_REMOTEPROC=y -# CONFIG_SPL_SPI_FLASH_TINY is not set -CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 -CONFIG_SPL_THERMAL=y -CONFIG_SPL_USB_GADGET=y -CONFIG_SPL_DFU=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_BOOTM_LEN=0x4000000 -CONFIG_CMD_DFU=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y -CONFIG_CMD_REMOTEPROC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y -CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y -CONFIG_SPL_OF_TRANSLATE=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_SPL_CLK_CCF=y -CONFIG_SPL_CLK_K3_PLL=y -CONFIG_SPL_CLK_K3=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 -CONFIG_DMA_CHANNELS=y -CONFIG_TI_K3_NAVSS_UDMA=y -CONFIG_TI_SCI_PROTOCOL=y -CONFIG_DA8XX_GPIO=y -CONFIG_DM_PCA953X=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_OMAP24XX=y -CONFIG_DM_MAILBOX=y -CONFIG_K3_SEC_PROXY=y -CONFIG_FS_LOADER=y -CONFIG_SPL_FS_LOADER=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_SPL_MMC_HS400_SUPPORT=y -CONFIG_MMC_SDHCI=y -CONFIG_SPL_MMC_SDHCI_ADMA=y -CONFIG_MMC_SDHCI_AM654=y -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_SHOW_PROGRESS=0 -CONFIG_CFI_FLASH=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPI_FLASH_SOFT_RESET=y -CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_MT35XU=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_GENERIC is not set -CONFIG_SPL_PINCTRL=y -# CONFIG_SPL_PINCTRL_GENERIC is not set -CONFIG_PINCTRL_SINGLE=y -CONFIG_POWER_DOMAIN=y -CONFIG_TI_POWER_DOMAIN=y -CONFIG_K3_SYSTEM_CONTROLLER=y -CONFIG_REMOTEPROC_TI_K3_ARM64=y -CONFIG_DM_RESET=y -CONFIG_RESET_TI_SCI=y -CONFIG_DM_SERIAL=y -CONFIG_SOC_DEVICE=y -CONFIG_SOC_DEVICE_TI_K3=y -CONFIG_SOC_TI=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_CADENCE_QSPI=y -CONFIG_HAS_CQSPI_REF_CLK=y -CONFIG_CQSPI_REF_CLK=133333333 -CONFIG_SYSRESET=y -CONFIG_SPL_SYSRESET=y -CONFIG_SYSRESET_TI_SCI=y -CONFIG_DM_THERMAL=y -CONFIG_TIMER=y -CONFIG_SPL_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_DM_USB_GADGET=y -CONFIG_SPL_DM_USB_GADGET=y -CONFIG_USB_CDNS3=y -CONFIG_USB_CDNS3_GADGET=y -CONFIG_SPL_USB_CDNS3_GADGET=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0x6168 -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_FS_EXT4=y -CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 -CONFIG_PANIC_HANG=y -CONFIG_LIB_RATIONAL=y -CONFIG_SPL_LIB_RATIONAL=y -- 2.34.1

2 5

[PATCH v3 0/3 RESEND] imx93: add ADC support
by Luca Ellero 14 Mar '23

14 Mar '23

Add ADC support for NXP iMX93 Changes for v2: - add "static" to functions - enable ADC in iMX93 EVK Changes for v3: - split in 3 commits - keep dts file in sync with Linux devicetree - add comments to commits Luca Ellero (3): dm: adc: add iMX93 ADC support imx93_evk: add adc node to dts file imx93_evk: defconfig: add adc support arch/arm/dts/imx93-11x11-evk.dts | 4 + configs/imx93_11x11_evk_defconfig | 1 + drivers/adc/Kconfig | 8 + drivers/adc/Makefile | 1 + drivers/adc/imx93-adc.c | 284 ++++++++++++++++++++++++++++++ 5 files changed, 298 insertions(+) create mode 100644 drivers/adc/imx93-adc.c -- 2.25.1

3 5

[PATCH 0/2] ARM: meson: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard
by Neil Armstrong 14 Mar '23

14 Mar '23

Add support for both the BananaPi BPI-CM4 module and the BananaPi baseboard which is compatible with the RaspberryPi CM4IO baseboard. The BananaPi BPI-CM4 module follows the CM4 specifications at [1], but with a single HDMI port and a single DSI output. The current CM4IO baseboard DT should work fine on the Raspberry CM4 baseboard and other derivatives baseboards, but proper DT should be written for other baseboards. The DT is imported from the submission done at [2] and applied at [3]. [1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf [2] https://lore.kernel.org/all/20230303-topic-amlogic-upstream-bpi-cm4-v2-0-2e… [3] https://git.kernel.org/amlogic/c/0262f2736978b1763363224698f47112a148dab0 Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- Neil Armstrong (2): ARM: dts: import initial DT for BPI-CM4 module with BPI-CM4IO baseboard ARM: meson: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard arch/arm/dts/Makefile | 1 + .../dts/meson-g12b-bananapi-cm4-cm4io-u-boot.dtsi | 6 + arch/arm/dts/meson-g12b-bananapi-cm4-cm4io.dts | 165 +++++++++ arch/arm/dts/meson-g12b-bananapi-cm4.dtsi | 388 +++++++++++++++++++++ board/amlogic/u200/MAINTAINERS | 1 + configs/bananapi-cm4-cm4io_defconfig | 84 +++++ doc/board/amlogic/index.rst | 1 + 7 files changed, 646 insertions(+) --- base-commit: b08ffdffdce95e267e782366f4a77bf6b5537b28 change-id: 20230307-u-boot-cm4-1311815d8371 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

1 3

[PATCH] ARM: meson: odroid-go-ultra: setup PMIC regulators are board init
by Neil Armstrong 14 Mar '23

14 Mar '23

The Odroid Go Ultra has 2 chained PMICs RK818 and RK818, and needs an adjustment on the BUCK and LDO values. Add the initial regulators values in -u-boot.dtsi & run the initial regulator setup in a new odroid-go-ultra board. Proper OTG and BOOST regulators are still missing to have USB-A host properly working. Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> --- .../arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi | 8 ++++++++ board/amlogic/odroid-go-ultra/MAINTAINERS | 7 +++++++ board/amlogic/odroid-go-ultra/Makefile | 5 +++++ board/amlogic/odroid-go-ultra/odroid-go-ultra.c | 22 ++++++++++++++++++++++ configs/odroid-go-ultra_defconfig | 4 ++-- 5 files changed, 44 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi index 00852f5e54..1c0f9765eb 100644 --- a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi +++ b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi @@ -14,3 +14,11 @@ &usb3_pcie_phy { /delete-property/ phy-supply; }; + +&vcc_2v3 { + regulator-init-microvolt = <2400000>; +}; + +&vdd_ee { + regulator-init-microvolt = <875000>; +}; diff --git a/board/amlogic/odroid-go-ultra/MAINTAINERS b/board/amlogic/odroid-go-ultra/MAINTAINERS new file mode 100644 index 0000000000..c22951b4e7 --- /dev/null +++ b/board/amlogic/odroid-go-ultra/MAINTAINERS @@ -0,0 +1,7 @@ +ODROID-GO-ULTRA +M: Neil Armstrong <neil.armstrong(a)linaro.org> +S: Maintained +L: u-boot-amlogic(a)groups.io +F: board/amlogic/odroid-go-ultra +F: configs/odroid-go-ultra_defconfig +F: doc/board/amlogic/odroid-go-ultra.rst diff --git a/board/amlogic/odroid-go-ultra/Makefile b/board/amlogic/odroid-go-ultra/Makefile new file mode 100644 index 0000000000..8ebaa0c215 --- /dev/null +++ b/board/amlogic/odroid-go-ultra/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2023 Neil Armstrong <neil.armstrong(a)linaro.org> + +obj-y := odroid-go-ultra.o diff --git a/board/amlogic/odroid-go-ultra/odroid-go-ultra.c b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c new file mode 100644 index 0000000000..bbd23e20fc --- /dev/null +++ b/board/amlogic/odroid-go-ultra/odroid-go-ultra.c @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Neil Armstrong <neil.armstrong(a)linaro.org> + */ + +#include <common.h> +#include <asm/arch/boot.h> +#include <power/regulator.h> + +int mmc_get_env_dev(void) +{ + if (meson_get_boot_device() == BOOT_DEVICE_EMMC) + return 1; + return 0; +} + +int board_init(void) +{ + regulators_enable_boot_on(_DEBUG); + + return 0; +} diff --git a/configs/odroid-go-ultra_defconfig b/configs/odroid-go-ultra_defconfig index a4d349fba4..c71c82dd1d 100644 --- a/configs/odroid-go-ultra_defconfig +++ b/configs/odroid-go-ultra_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y -CONFIG_SYS_BOARD="w400" +CONFIG_SYS_BOARD="odroid-go-ultra" CONFIG_ARCH_MESON=y CONFIG_TEXT_BASE=0x01000000 CONFIG_NR_DRAM_BANKS=1 @@ -17,7 +17,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_MISC_INIT_R=y CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set @@ -27,6 +26,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y --- base-commit: d1f5dbe6645ad51e318dd322033fe6a08bce357b change-id: 20230210-u-boot-odroid-go-ultra-pmics-setup-0e79dad28de6 Best regards, -- Neil Armstrong <neil.armstrong(a)linaro.org>

1 1

[PATCH] rockchip: sdhci: rk3568: bypass DLL when clk <= 52 MHz
by Vasily Khoruzhick 14 Mar '23

14 Mar '23

For Rockchip platform, DLL bypass bit and start bit need to be set if DLL is not locked. With this change applied eMMC in my NanoPi R5S can run at 52 MHz. Based on linux commit b75a52b0dda3 ("mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform") Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- drivers/mmc/rockchip_sdhci.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 1ac95f32b3..fef23f593e 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -61,6 +61,7 @@ #define DWCMSHC_EMMC_DLL_RXCLK 0x804 #define DWCMSHC_EMMC_DLL_TXCLK 0x808 #define DWCMSHC_EMMC_DLL_STRBIN 0x80c +#define DECMSHC_EMMC_DLL_CMDOUT 0x810 #define DWCMSHC_EMMC_DLL_STATUS0 0x840 #define DWCMSHC_EMMC_DLL_STATUS1 0x844 #define DWCMSHC_EMMC_DLL_START BIT(0) @@ -69,6 +70,7 @@ #define DWCMSHC_EMMC_DLL_START_DEFAULT 5 #define DWCMSHC_EMMC_DLL_INC_VALUE 2 #define DWCMSHC_EMMC_DLL_INC 8 +#define DWCMSHC_EMMC_DLL_BYPASS BIT(24) #define DWCMSHC_EMMC_DLL_DLYENA BIT(27) #define DLL_TXCLK_TAPNUM_DEFAULT 0xA @@ -83,6 +85,7 @@ #define DWCMSHC_EMMC_DLL_TIMEOUT BIT(9) #define DLL_RXCLK_NO_INVERTER 1 #define DLL_RXCLK_INVERTER 0 +#define DLL_RXCLK_ORI_GATE BIT(31) #define DWCMSHC_ENHANCED_STROBE BIT(8) #define DLL_LOCK_WO_TMOUT(x) \ ((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \ @@ -348,10 +351,14 @@ static int rk3568_sdhci_emmc_set_clock(struct sdhci_host *host, unsigned int clo DLL_STRBIN_TAPNUM_FROM_SW; sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_STRBIN); } else { - /* reset the clock phase when the frequency is lower than 100MHz */ - sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL); - extra = DLL_RXCLK_NO_INVERTER << DWCMSHC_EMMC_DLL_RXCLK_SRCSEL; - sdhci_writel(host, extra, DWCMSHC_EMMC_DLL_RXCLK); + /* + * Disable DLL and reset both of sample and drive clock. + * The bypass bit and start bit need to be set if DLL is not locked. + */ + sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, + DWCMSHC_EMMC_DLL_CTRL); + sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK); + sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT); sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK); /* * Before switching to hs400es mode, the driver will enable -- 2.39.2

2 1

[RFC PATCH 00/16] arm: Add Rockchip RK3588 support
by Jagan Teki 13 Mar '23

13 Mar '23

This series support Rockchip RK3588. All the device tree files are synced from linux-next with the proper SHA1 mentioned in the commit messages. Unfortunately, the BL31 from rkbin is not compatible with U-Boot so it is failing to load ATF entry from SPL and hang. Verified below BL31 versions, bl31-v1.15 bl31-v1.21 bl31-v1.22 bl31-v1.23 bl31-v1.24 bl31-v1.25 bl31-v1.26 Rever-engineered with respect to rockchip u-boot by using the same FIT_GENERATOR being used in Mainline, rockchip u-boot is booting but mainline showing the same issue. Log: LPDDR4X, 2112MHz01-00642-g6bdfd31756-dirty (Jan 26 2023 ��3:44:34 +0530) channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00642-g6bdfd31756-dirty (Jan 26 2023 - 03:44:34 +0530) Trying to boot from MMC1 bl31_entry: atf_entry start << hang >> Any information on BL31 for RK3588 please share. Any inputs? Jagan. Jagan Teki (16): rockchip: mkimage: Add rk3588 support arm: rockchip: Add cru header for rk3588 arm: rockchip: Add grf header for rk3588 dt-bindings: clk: Add dt-binding header for RK3588 clk: rockchip: Add rk3588 clk support clk: rockchip: pll: Add pll_rk3588 type for rk3588 ram: rockchip: Add rk3588 ddr driver support dt-bindings: power: Add power-domain header for rk3588 dt-bindings: reset: add rk3588 reset definitions arm: rockchip: Add ioc header for rk3588 arm64: dts: rockchip: Add base DT for rk3588 SoC arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO arm: rockchip: Add RK3588 arch core support ARM: dts: rockchip: Add rk3588-u-boot.dtsi board: rockchip: Add Edgeble Neural Compute Module 6 arch/arm/dts/Makefile | 3 + .../dts/rk3588-edgeble-neu6a-io-u-boot.dtsi | 23 + arch/arm/dts/rk3588-edgeble-neu6a-io.dts | 27 + arch/arm/dts/rk3588-edgeble-neu6a.dtsi | 32 + arch/arm/dts/rk3588-pinctrl.dtsi | 516 +++ arch/arm/dts/rk3588-u-boot.dtsi | 101 + arch/arm/dts/rk3588.dtsi | 58 + arch/arm/dts/rk3588s-pinctrl.dtsi | 3403 +++++++++++++++++ arch/arm/dts/rk3588s.dtsi | 1703 +++++++++ arch/arm/include/asm/arch-rk3588/boot0.h | 11 + arch/arm/include/asm/arch-rk3588/gpio.h | 11 + arch/arm/include/asm/arch-rockchip/clock.h | 24 + .../include/asm/arch-rockchip/cru_rk3588.h | 451 +++ .../include/asm/arch-rockchip/grf_rk3588.h | 35 + .../include/asm/arch-rockchip/ioc_rk3588.h | 102 + arch/arm/mach-rockchip/Kconfig | 20 + arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/rk3588/Kconfig | 30 + arch/arm/mach-rockchip/rk3588/Makefile | 9 + arch/arm/mach-rockchip/rk3588/clk_rk3588.c | 33 + arch/arm/mach-rockchip/rk3588/rk3588.c | 162 + arch/arm/mach-rockchip/rk3588/syscon_rk3588.c | 32 + board/edgeble/neural-compute-module-6/Kconfig | 15 + .../neural-compute-module-6/MAINTAINERS | 6 + .../edgeble/neural-compute-module-6/Makefile | 7 + board/edgeble/neural-compute-module-6/neu6.c | 4 + configs/neu6a-io-rk3588_defconfig | 68 + doc/board/rockchip/rockchip.rst | 2 + drivers/clk/rockchip/Makefile | 1 + drivers/clk/rockchip/clk_pll.c | 267 +- drivers/clk/rockchip/clk_rk3588.c | 2019 ++++++++++ drivers/ram/rockchip/Makefile | 1 + drivers/ram/rockchip/sdram_rk3588.c | 56 + include/configs/neural-compute-module-6.h | 15 + include/configs/rk3588_common.h | 32 + .../dt-bindings/clock/rockchip,rk3588-cru.h | 766 ++++ include/dt-bindings/power/rk3588-power.h | 69 + .../dt-bindings/reset/rockchip,rk3588-cru.h | 754 ++++ tools/rkcommon.c | 1 + 39 files changed, 10867 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a-io-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a-io.dts create mode 100644 arch/arm/dts/rk3588-edgeble-neu6a.dtsi create mode 100644 arch/arm/dts/rk3588-pinctrl.dtsi create mode 100644 arch/arm/dts/rk3588-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588.dtsi create mode 100644 arch/arm/dts/rk3588s-pinctrl.dtsi create mode 100644 arch/arm/dts/rk3588s.dtsi create mode 100644 arch/arm/include/asm/arch-rk3588/boot0.h create mode 100644 arch/arm/include/asm/arch-rk3588/gpio.h create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk3588.h create mode 100644 arch/arm/include/asm/arch-rockchip/grf_rk3588.h create mode 100644 arch/arm/include/asm/arch-rockchip/ioc_rk3588.h create mode 100644 arch/arm/mach-rockchip/rk3588/Kconfig create mode 100644 arch/arm/mach-rockchip/rk3588/Makefile create mode 100644 arch/arm/mach-rockchip/rk3588/clk_rk3588.c create mode 100644 arch/arm/mach-rockchip/rk3588/rk3588.c create mode 100644 arch/arm/mach-rockchip/rk3588/syscon_rk3588.c create mode 100644 board/edgeble/neural-compute-module-6/Kconfig create mode 100644 board/edgeble/neural-compute-module-6/MAINTAINERS create mode 100644 board/edgeble/neural-compute-module-6/Makefile create mode 100644 board/edgeble/neural-compute-module-6/neu6.c create mode 100644 configs/neu6a-io-rk3588_defconfig create mode 100644 drivers/clk/rockchip/clk_rk3588.c create mode 100644 drivers/ram/rockchip/sdram_rk3588.c create mode 100644 include/configs/neural-compute-module-6.h create mode 100644 include/configs/rk3588_common.h create mode 100644 include/dt-bindings/clock/rockchip,rk3588-cru.h create mode 100644 include/dt-bindings/power/rk3588-power.h create mode 100644 include/dt-bindings/reset/rockchip,rk3588-cru.h -- 2.25.1

6 55

Pull request for efi-2023-04-rc4
by Heinrich Schuchardt 13 Mar '23

13 Mar '23

The following changes since commit 6c1cdf158c4f3ccc8c5f9552f049a3386899dcd2: Merge tag 'dm-pull-10mar23' of https://source.denx.de/u-boot/custodians/u-boot-dm (2023-03-10 16:01:52 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-efi.git tags/efi-2023-04-rc4 for you to fetch changes up to d3970e04e7125e37ea8c4f3f056b6f5ba868e5f7: efi_loader: describe term_get_char() (2023-03-13 13:56:14 +0100) Gitlab CI showed no issues: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/15572 ---------------------------------------------------------------- Pull request for efi-2023-04-rc4 Documentation: * man-page for panic command UEFI: * Correct parameter check for SetVariable() Other: * Provide unit test for crc8 ---------------------------------------------------------------- Heinrich Schuchardt (3): test: unit test for crc8 doc: man-page for panic command efi_loader: describe term_get_char() Masahisa Kojima (1): efi_loader: update SetVariable attribute check Vincent Stehlé (1): doc: uefi: fix links doc/develop/uefi/fwu_updates.rst | 3 ++- doc/develop/uefi/uefi.rst | 4 ++-- doc/usage/cmd/panic.rst | 33 +++++++++++++++++++++++++++++++++ doc/usage/index.rst | 1 + lib/efi_loader/efi_console.c | 8 ++++++++ lib/efi_loader/efi_variable.c | 31 +++++++++++++++++++++++++------ test/lib/Makefile | 1 + test/lib/test_crc8.c | 29 +++++++++++++++++++++++++++++ 8 files changed, 101 insertions(+), 9 deletions(-) create mode 100644 doc/usage/cmd/panic.rst create mode 100644 test/lib/test_crc8.c

2 1