December 2023 - U-Boot

[PATCH] common: usb-hub: Reset hub port before scanning
by Shantur Rathore 09 Dec '23

09 Dec '23

Currently when a hub is turned on, all the ports are powered on. This works well for hubs which have individual power control. For the hubs without individual power control this has no effect. Mostly in these scenarios the hub port is powered before the USB controller is enabled, this can lead to some devices in unexpected state. With this patch, we explicitly reset the port while powering up hub This resets the port for hubs without port power control and has no effect on hubs with port power control as the port is still off. Before this patch AMicro AM8180 based NVME to USB adapter won't be detected as a USB3.0 Mass Storage device but with this it works as expected. Tested working after this patch: 1. AMicro AM8180 based NVME to USB Adapter 2. Kingston DataTraveler 3.0 3. GenesysLogic USB3.0 Hub The drives were tested while connected directly and via the hub. --- common/usb_hub.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/common/usb_hub.c b/common/usb_hub.c index 85c0822d8b..06fe436add 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -174,8 +174,10 @@ static void usb_hub_power_on(struct usb_hub_device *hub) debug("enabling power on all ports\n"); for (i = 0; i < dev->maxchild; i++) { + usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_RESET); + debug("Reset : port %d returns %lX\n", i + 1, dev->status); usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); - debug("port %d returns %lX\n", i + 1, dev->status); + debug("PowerOn : port %d returns %lX\n", i + 1, dev->status); } #ifdef CONFIG_SANDBOX -- 2.40.1

2 21

iMX6, CONFIG_IMX_HAB and fuse_read()
by Lisandro Pérez Meyer 09 Dec '23

09 Dec '23

Hi! I am currently not subscribed (already filled the form waiting for confirmation), so please CC me for the moment. I am trying to enable Secure Boot/HAB on u-boot 2022.07. In a previous version this was achieved by enabling CONFIG_SECURE_BOOT, which was then renamed to CONFIG_IMX_HAB. Now if I enable this option I get: ``` | arm-tdx-linux-gnueabi-ld.bfd: arch/arm/mach-imx/hab.o: in function `imx_hab_is_enabled': | /home/lisandro/myproject/build/tmp/work/apalis_imx6-tdx-linux-gnueabi/u-boot-toradex/1_2022.07-r0/git/arch/arm/mach-imx/hab.c:875: undefined reference to `fuse_read' | make[2]: *** [/home/lisandro/myproject/build/tmp/work/apalis_imx6-tdx-linux-gnueabi/u-boot-toradex/1_2022.07-r0/git/scripts/Makefile.spl:525: spl/u-boot-spl] Error 1 ``` Now without IMX_HAB enabled CONFIG_CMD_FUSE is enabled and actually works, ie, I can read the fuses from u-boot's command line. So I'm suspecting this is just a missing condition... somewhere. But so far I have not been able to detect exactly where. Can anyone give me a non-NULL pointer on this? Thanks in advance, Lisandro. -- Lisandro Pérez Meyer Embedded Platform Engineer

2 6

[PATCH v2 1/9] cmd: bdinfo: Optionally use getopt and implement bdinfo -a
by Marek Vasut 09 Dec '23

09 Dec '23

Add optional support for getopt() and in case this is enabled via GETOPT configuration option, implement support for 'bdinfo -a'. The 'bdinfo -a' behaves exactly like bdinfo and prints 'all' the bdinfo information. This is implemented in preparation for other more fine-grained options. Reviewed-by: Simon Glass <sjg(a)chromium.org> Signed-off-by: Marek Vasut <marek.vasut+renesas(a)mailbox.org> --- Cc: Bin Meng <bmeng.cn(a)gmail.com> Cc: Mario Six <mario.six(a)gdsys.cc> Cc: Nikhil M Jain <n-jain1(a)ti.com> Cc: Simon Glass <sjg(a)chromium.org> --- V2: Add RB from Simon --- cmd/bdinfo.c | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 1fe13ca13a0..2c0d5e9c01b 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -10,6 +10,7 @@ #include <command.h> #include <dm.h> #include <env.h> +#include <getopt.h> #include <lmb.h> #include <mapmem.h> #include <net.h> @@ -133,10 +134,8 @@ static void print_serial(struct udevice *dev) bdinfo_print_num_l(" clock", info.clock); } -int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +static int bdinfo_print_all(struct bd_info *bd) { - struct bd_info *bd = gd->bd; - #ifdef DEBUG bdinfo_print_num_l("bd address", (ulong)bd); #endif @@ -184,8 +183,30 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) return 0; } +int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) +{ + struct bd_info *bd = gd->bd; + struct getopt_state gs; + int opt; + + if (!CONFIG_IS_ENABLED(GETOPT) || argc == 1) + return bdinfo_print_all(bd); + + getopt_init_state(&gs); + while ((opt = getopt(&gs, argc, argv, "a")) > 0) { + switch (opt) { + case 'a': + return bdinfo_print_all(bd); + default: + return CMD_RET_USAGE; + } + } + + return CMD_RET_USAGE; +} + U_BOOT_CMD( - bdinfo, 1, 1, do_bdinfo, + bdinfo, 2, 1, do_bdinfo, "print Board Info structure", "" ); -- 2.40.1

4 12

[PATCH] riscv: sifive: unmatched: migrate to text environment
by Yong-Xuan Wang 09 Dec '23

09 Dec '23

Migrate to the new environment format and drop most of the config.h. Signed-off-by: Yong-Xuan Wang <yongxuan.wang(a)sifive.com> --- board/sifive/unmatched/unmatched.env | 19 ++++++++++++++ configs/sifive_unmatched_defconfig | 2 +- include/configs/sifive-unmatched.h | 37 ---------------------------- 3 files changed, 20 insertions(+), 38 deletions(-) create mode 100644 board/sifive/unmatched/unmatched.env diff --git a/board/sifive/unmatched/unmatched.env b/board/sifive/unmatched/unmatched.env new file mode 100644 index 0000000000..0f1e5a7174 --- /dev/null +++ b/board/sifive/unmatched/unmatched.env @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +/* environment for HiFive Unmatched boards */ + +kernel_addr_r=0x80200000 +kernel_comp_addr_r=0x88000000 +kernel_comp_size=0x4000000 +fdt_addr_r=0x8c000000 +scriptaddr=0x8c100000 +pxefile_addr_r=0x8c200000 +ramdisk_addr_r=0x8c300000 +type_guid_gpt_loader1=5B193300-FC78-40CD-8002-E86C45580B47 +type_guid_gpt_loader2=2E54B353-1271-4842-806F-E436D6AF6985 +type_guid_gpt_system=0FC63DAF-8483-4772-8E79-3D69D8477DE4 +partitions= + name=loader1,start=17K,size=1M,type=${type_guid_gpt_loader1}; + name=loader2,size=4MB,type=${type_guid_gpt_loader2}; + name=system,size=-,bootable,type=${type_guid_gpt_system}; +fdtfile= CONFIG_DEFAULT_FDT_FILE diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index 6a95ab3977..43fc87d3ce 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -23,7 +23,7 @@ CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 -CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTSTD_DEFAULTS=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};" CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unmatched-a00.dtb" diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index de8bfc1123..27e0912665 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -13,41 +13,4 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -/* Environment options */ - -#define BOOT_TARGET_DEVICES(func) \ - func(NVME, nvme, 0) \ - func(NVME, nvme, 1) \ - func(USB, usb, 0) \ - func(MMC, mmc, 0) \ - func(SCSI, scsi, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#define TYPE_GUID_LOADER1 "5B193300-FC78-40CD-8002-E86C45580B47" -#define TYPE_GUID_LOADER2 "2E54B353-1271-4842-806F-E436D6AF6985" -#define TYPE_GUID_SYSTEM "0FC63DAF-8483-4772-8E79-3D69D8477DE4" - -#define PARTS_DEFAULT \ - "name=loader1,start=17K,size=1M,type=${type_guid_gpt_loader1};" \ - "name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \ - "name=system,size=-,bootable,type=${type_guid_gpt_system};" - -#define CFG_EXTRA_ENV_SETTINGS \ - "kernel_addr_r=0x80200000\0" \ - "kernel_comp_addr_r=0x88000000\0" \ - "kernel_comp_size=0x4000000\0" \ - "fdt_addr_r=0x8c000000\0" \ - "scriptaddr=0x8c100000\0" \ - "pxefile_addr_r=0x8c200000\0" \ - "ramdisk_addr_r=0x8c300000\0" \ - "type_guid_gpt_loader1=" TYPE_GUID_LOADER1 "\0" \ - "type_guid_gpt_loader2=" TYPE_GUID_LOADER2 "\0" \ - "type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \ - "partitions=" PARTS_DEFAULT "\0" \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - BOOTENV - #endif /* __SIFIVE_UNMATCHED_H */ -- 2.17.1

2 1

[PATCH 01/11] global: Remove duplicate common.h inclusions
by Tom Rini 09 Dec '23

09 Dec '23

These files include <common.h> twice. Start by removing the second inclusion of the file. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- board/data_modul/common/common.c | 1 - board/grinn/liteboard/board.c | 1 - board/toradex/colibri_imx7/colibri_imx7.c | 1 - board/wandboard/wandboard.c | 1 - drivers/gpio/gpio-aspeed.c | 1 - drivers/spi/fsl_dspi.c | 1 - drivers/video/exynos/exynos_dp.c | 1 - 7 files changed, 7 deletions(-) diff --git a/board/data_modul/common/common.c b/board/data_modul/common/common.c index bf9a11472d11..4f308dad2e4d 100644 --- a/board/data_modul/common/common.c +++ b/board/data_modul/common/common.c @@ -12,7 +12,6 @@ #include <asm/io.h> #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/iomux-v3.h> -#include <common.h> #include <dm/uclass.h> #include <hang.h> #include <i2c_eeprom.h> diff --git a/board/grinn/liteboard/board.c b/board/grinn/liteboard/board.c index 48392c48e5cc..cf1d7cee9252 100644 --- a/board/grinn/liteboard/board.c +++ b/board/grinn/liteboard/board.c @@ -20,7 +20,6 @@ #include <asm/mach-imx/iomux-v3.h> #include <asm/mach-imx/boot_mode.h> #include <asm/io.h> -#include <common.h> #include <env.h> #include <fsl_esdhc_imx.h> #include <linux/sizes.h> diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index f0356af0082b..3c4a14148719 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -16,7 +16,6 @@ #include <asm/gpio.h> #include <asm/mach-imx/iomux-v3.h> #include <asm/io.h> -#include <common.h> #include <dm.h> #include <dm/platform_data/serial_mxc.h> #include <fdt_support.h> diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 48914450a294..8be62c86695d 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -28,7 +28,6 @@ #include <env.h> #include <linux/delay.h> #include <linux/sizes.h> -#include <common.h> #include <miiphy.h> #include <netdev.h> #include <phy.h> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 2c5415c671d1..1c3d18796b3a 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -11,7 +11,6 @@ #include <asm/gpio.h> #include <config.h> -#include <common.h> #include <clk.h> #include <dm.h> #include <asm/io.h> diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c index f8ec268812ca..041abe57e355 100644 --- a/drivers/spi/fsl_dspi.c +++ b/drivers/spi/fsl_dspi.c @@ -14,7 +14,6 @@ #include <common.h> #include <dm.h> #include <errno.h> -#include <common.h> #include <log.h> #include <spi.h> #include <malloc.h> diff --git a/drivers/video/exynos/exynos_dp.c b/drivers/video/exynos/exynos_dp.c index a532d5ae1abb..59838da6c926 100644 --- a/drivers/video/exynos/exynos_dp.c +++ b/drivers/video/exynos/exynos_dp.c @@ -7,7 +7,6 @@ #include <common.h> #include <dm.h> -#include <common.h> #include <display.h> #include <fdtdec.h> #include <log.h> -- 2.34.1

5 24

[GIT PULL] Please pull u-boot-amlogic-20231207
by Neil Armstrong 09 Dec '23

09 Dec '23

Hi Tom, A little fix to add the missing DM_USB_GADGET config for the amlogic boards The CI job is at https://source.denx.de/u-boot/custodians/u-boot-amlogic/pipelines/18828 Thanks, Neil The following changes since commit 2f0282922b2c458eea7f85c500a948a587437b63: Prepare v2024.01-rc4 (2023-12-04 13:46:56 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-amlogic.git tags/u-boot-amlogic-20231207 for you to fetch changes up to 4005729c0de234ffcf36465f6471755617b42375: configs: meson: enable missing DM_USB_GADGET (2023-12-07 09:36:19 +0100) ---------------------------------------------------------------- - Add missing DM_USB_GADGET to amlogic boards ---------------------------------------------------------------- Neil Armstrong (1): configs: meson: enable missing DM_USB_GADGET configs/bananapi-m2-pro_defconfig | 1 + configs/bananapi-m2s_defconfig | 1 + configs/libretech-cc_v2_defconfig | 1 + configs/odroid-go-ultra_defconfig | 1 + configs/radxa-zero2_defconfig | 1 + 5 files changed, 5 insertions(+)

2 1

[PATCH v1 1/1] Makefile.lib: Always rebuild DSDT
by Andy Shevchenko 09 Dec '23

09 Dec '23

The dsdt.asl is usually combined out of several files that are included in the main one. Whenever we change the content of any of such files, build system is not able to recognize them. Hence the easiest way is to force DSDT rebuild each time we run make. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- scripts/Makefile.lib | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 07696e86bb54..8c3c893b398a 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -441,7 +441,7 @@ cmd_acpi_c_asl= \ iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \ mv $(patsubst %.c,%.hex,$@) $@ -$(obj)/dsdt.c: $(src)/dsdt.asl +$(obj)/dsdt.c: $(src)/dsdt.asl FORCE $(call cmd,acpi_c_asl) $(Q)sed -i -e "s,dsdt_aml_code,AmlCode," $@ -- 2.33.0

5 9

[PATCH v2] arm: apple: t602x: Add missing MMIO regions to memmap
by Janne Grunau via B4 Relay 09 Dec '23

09 Dec '23

From: Janne Grunau <j(a)jannau.net> The memory maps for Apple's M2 Pro/Max/Ultra left MMIO space out which was not used by any driver at the time. The display out exposed as simple-framebuffer use a power-domain controlled by a device in an unmapped region. Add a map covering this region as well as another MMIO region in the range 0x4'0000'0000 - 0x5'0000'0000. The added regions cover all MMIO annotated in Apple's device tree in this range. Signed-off-by: Janne Grunau <j(a)jannau.net> --- Changes in v2: - use SZ_1G as block size - Link to v1: https://lore.kernel.org/r/20231130-apple_t602x_extend_memmap-v1-1-cd96b251d… --- arch/arm/mach-apple/board.c | 48 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c index 47393babbc..7a6151a972 100644 --- a/arch/arm/mach-apple/board.c +++ b/arch/arm/mach-apple/board.c @@ -370,6 +370,22 @@ static struct mm_region t6020_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x400000000, + .phys = 0x400000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x480000000, + .phys = 0x480000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { /* I/O */ .virt = 0x580000000, @@ -471,6 +487,22 @@ static struct mm_region t6022_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x400000000, + .phys = 0x400000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x480000000, + .phys = 0x480000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { /* I/O */ .virt = 0x580000000, @@ -551,6 +583,22 @@ static struct mm_region t6022_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x2400000000, + .phys = 0x2400000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* I/O */ + .virt = 0x2480000000, + .phys = 0x2480000000, + .size = SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { /* I/O */ .virt = 0x2580000000, --- base-commit: 43f2873fa98b1da6eb56d756315c7bd7db63db27 change-id: 20231130-apple_t602x_extend_memmap-c82c522ca8c0 Best regards, -- Janne Grunau <j(a)jannau.net>

5 4

[PATCH v2 0/7] risc-v: add ACPI support on QEMU
by Heinrich Schuchardt 09 Dec '23

09 Dec '23

QEMU 8.1.2 can create ACPI tables for the RISC-V architecture. Allow passing them through to the operating system. Provide a new defconfig that enables this. This series depends on [PATCH] acpi: move acpi_get_rsdp_addr() to acpi/acpi_table.h https://lore.kernel.org/u-boot/20231109172302.54324-1-heinrich.schuchardt@c… v2: provide a new Kconfig symbol CONFIG_QFW_ACPI carve out qfw_acpi.c use CONFIG_ACPI to select QFW support provide a Kconfig fragment instead of a new defconfig Heinrich Schuchardt (7): acpi: Kconfig symbol CONFIG_QFW_ACPI acpi: carve out qfw_acpi.c risc-v: add ACPI fields to global data risc-v: add support for QEMU firmware tables riscv: qemu: copy ACPI tables from QEMU riscv: allow usage of ACPI configs: qemu: add config fragment for ACPI MAINTAINERS | 1 + arch/Kconfig | 1 + arch/riscv/include/asm/global_data.h | 4 + board/emulation/configs/acpi.config | 3 + board/emulation/qemu-riscv/Kconfig | 2 + board/emulation/qemu-riscv/qemu-riscv.c | 17 ++ doc/board/emulation/acpi.rst | 23 +++ doc/board/emulation/index.rst | 1 + drivers/misc/Kconfig | 7 + drivers/misc/Makefile | 1 + drivers/misc/qfw.c | 240 ---------------------- drivers/misc/qfw_acpi.c | 256 ++++++++++++++++++++++++ lib/acpi/Makefile | 2 +- lib/acpi/acpi_writer.c | 4 +- 14 files changed, 319 insertions(+), 243 deletions(-) create mode 100644 board/emulation/configs/acpi.config create mode 100644 doc/board/emulation/acpi.rst create mode 100644 drivers/misc/qfw_acpi.c -- 2.40.1

4 19

Pull request: u-boot-sunxi/master for v2024.01
by Andre Przywara 09 Dec '23

09 Dec '23

Hi Tom, please pull the hopefully final sunxi changes for this cycle: the first four patches are actual fixes. The last three patches add support for the apparently popular OrangePi Zero 3 board: multiple people seem to be champing at the bit, so I'd rather give them something real instead of people using random trees they found on the Internet. It's actually mostly the new defconfig file anyway, so the chances for regressions are very slim. Gitlab CI passed, and multiple people booted that on the Zero 3 board. Thanks, Andre ========================================================= The following changes since commit 2f0282922b2c458eea7f85c500a948a587437b63: Prepare v2024.01-rc4 (2023-12-04 13:46:56 -0500) are available in the Git repository at: https://source.denx.de/u-boot/custodians/u-boot-sunxi.git master for you to fetch changes up to d2e1cc69a24719e9939a84dc42bdf281af6ec35d: sunxi: H616: Add OrangePi Zero 3 board support (2023-12-06 23:09:17 +0000) ---------------------------------------------------------------- Andre Przywara (5): sunxi: H616: OrangePi Zero 2: enable USB power supply sunxi: h616: (really) lower SPL stack address to avoid BROM data mtd: spi-nor: Add support for zBIT ZB25VQ128 sunxi: H616: remove default AXP305 selection sunxi: H616: Add OrangePi Zero 3 board support Chukun Pan (1): sunxi: dts: arm64: update emac for Orange Pi Zero 3 Stephen Graf (1): sunxi: correct documentation for SPI flashing arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h616-orangepi-zero.dtsi | 3 --- arch/arm/dts/sun50i-h616-orangepi-zero2.dts | 3 +++ arch/arm/dts/sun50i-h618-orangepi-zero3.dts | 2 ++ board/sunxi/MAINTAINERS | 5 +++++ common/spl/Kconfig | 2 +- configs/orangepi_zero2_defconfig | 2 ++ configs/orangepi_zero3_defconfig | 32 +++++++++++++++++++++++++++++ configs/x96_mate_defconfig | 1 + doc/board/allwinner/sunxi.rst | 3 +-- drivers/mtd/spi/Kconfig | 5 +++++ drivers/mtd/spi/spi-nor-ids.c | 5 +++++ drivers/power/Kconfig | 1 - 13 files changed, 58 insertions(+), 7 deletions(-) create mode 100644 configs/orangepi_zero3_defconfig

2 1