December 2023 - U-Boot

[PATCH v2 1/4] net: dwc_eth_qos: add i.MX93 support
by Sébastien Szymanski 13 Dec '23

13 Dec '23

Add support for DWC EQoS MAC on i.MX93. Signed-off-by: Sébastien Szymanski <sebastien.szymanski(a)armadeus.com> --- Changes for v2: - rebase to not break Rockchip's boards drivers/net/dwc_eth_qos.c | 4 ++++ drivers/net/dwc_eth_qos_imx.c | 3 +++ 2 files changed, 7 insertions(+) diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index 18466cfe257e..e7eb6213adad 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -1707,6 +1707,10 @@ static const struct udevice_id eqos_ids[] = { .compatible = "nxp,imx8mp-dwmac-eqos", .data = (ulong)&eqos_imx_config }, + { + .compatible = "nxp,imx93-dwmac-eqos", + .data = (ulong)&eqos_imx_config + }, #endif #if IS_ENABLED(CONFIG_DWC_ETH_QOS_ROCKCHIP) { diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c index 60f3f3f5a10f..e3f55dd98173 100644 --- a/drivers/net/dwc_eth_qos_imx.c +++ b/drivers/net/dwc_eth_qos_imx.c @@ -181,6 +181,9 @@ static int eqos_set_tx_clk_speed_imx(struct udevice *dev) ulong rate; int ret; + if (device_is_compatible(dev, "nxp,imx93-dwmac-eqos")) + return 0; + debug("%s(dev=%p):\n", __func__, dev); if (eqos->phy->interface == PHY_INTERFACE_MODE_RMII) -- 2.41.0

2 5

[PATCH] imx7d-sdb: Sync devicetree with kernel 6.5-rc1
by Fabio Estevam 13 Dec '23

13 Dec '23

From: Fabio Estevam <festevam(a)denx.de> Commit 0aea5dda2928 ("ARM: dts: imx7d-sdb-u-boot: Fix usdhc1 UHS operation") did a temporary workaround by addng the usdhc1 fix inside the -u-boot.dtsi file. The imx7d-sdb.dts from kernel 6.5-rc1 contains the proper UHS fix, so sync the devicetree tree and remove the previous fix from -u-boot.dtsi. Also, adjust the PMIC node name inside pmic_get() to match the devicetree update. Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- arch/arm/dts/imx7d-sdb-u-boot.dtsi | 51 ---------------- arch/arm/dts/imx7d-sdb.dts | 73 +++++++++++++++++------ board/freescale/mx7dsabresd/mx7dsabresd.c | 2 +- 3 files changed, 56 insertions(+), 70 deletions(-) diff --git a/arch/arm/dts/imx7d-sdb-u-boot.dtsi b/arch/arm/dts/imx7d-sdb-u-boot.dtsi index ac1d6e2e6480..b78358fa1397 100644 --- a/arch/arm/dts/imx7d-sdb-u-boot.dtsi +++ b/arch/arm/dts/imx7d-sdb-u-boot.dtsi @@ -5,54 +5,3 @@ &usbotg1 { dr_mode = "peripheral"; }; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; -}; - -&pinctrl_usdhc1 { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x59 - MX7D_PAD_SD1_CLK__SD1_CLK 0x19 - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 - >; -}; - -&iomuxc { - pinctrl_usdhc1_gpio: usdhc1gpiogrp { - fsl,pins = < - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ - MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5a - MX7D_PAD_SD1_CLK__SD1_CLK 0x1a - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { - fsl,pins = < - MX7D_PAD_SD1_CMD__SD1_CMD 0x5b - MX7D_PAD_SD1_CLK__SD1_CLK 0x1b - MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b - MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b - MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b - MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b - >; - }; -}; diff --git a/arch/arm/dts/imx7d-sdb.dts b/arch/arm/dts/imx7d-sdb.dts index 78f4224a9bf4..75f1cd14bea1 100644 --- a/arch/arm/dts/imx7d-sdb.dts +++ b/arch/arm/dts/imx7d-sdb.dts @@ -24,14 +24,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; @@ -39,12 +39,12 @@ }; }; - spi4 { + spi-4 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi4>; - gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; @@ -60,6 +60,17 @@ }; }; + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VDD_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <200000>; + off-on-delay-us = <20000>; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -205,13 +216,8 @@ pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0>; - ti,x-plate-ohms = /bits/ 16 <400>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; + touchscreen-max-pressure = <255>; wakeup-source; }; }; @@ -269,7 +275,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pfuze3000@8 { + pmic: pmic@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; @@ -478,10 +484,13 @@ }; &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&reg_sd1_vmmc>; wakeup-source; keep-power-in-suspend; status = "okay"; @@ -736,6 +745,15 @@ >; }; + pinctrl_usdhc1_gpio: usdhc1_gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 @@ -744,9 +762,28 @@ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 - MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ - MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ - MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b >; }; diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index 2777ae13bce0..fbf85411910e 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -267,7 +267,7 @@ int power_init_board(void) struct udevice *dev; int ret, dev_id, rev_id; - ret = pmic_get("pfuze3000@8", &dev); + ret = pmic_get("pmic@8", &dev); if (ret == -ENODEV) return 0; if (ret != 0) -- 2.34.1

2 1

[PATCH] imx8qm_dmsse20a1: Improve SPL memory configuration
by Fabio Estevam 13 Dec '23

13 Dec '23

From: Fabio Estevam <festevam(a)denx.de> Currently, building imx8qm_dmsse20a1_defconfig leads to the following warning: aarch64-linux-ld.bfd: invalid origin for memory region .sdram Fix it by using the same SPL memory layout as done in the imx8mq_evk. Reported-by: Tom Rini <trini(a)konsulko.com> Signed-off-by: Fabio Estevam <festevam(a)denx.de> Tested-by: Oliver Graute <oliver.graute(a)kococonnector.com> --- configs/imx8qm_dmsse20a1_defconfig | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/configs/imx8qm_dmsse20a1_defconfig b/configs/imx8qm_dmsse20a1_defconfig index 3341b5e447fb..57a5007f9e5b 100644 --- a/configs/imx8qm_dmsse20a1_defconfig +++ b/configs/imx8qm_dmsse20a1_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_ENV_OFFSET=0x80000 CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_SPL_STACK=0x13e000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_SYS_MEMTEST_START=0xA0000000 @@ -38,11 +39,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_BSS_START_ADDR=0x00128000 CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG_SUPPORT=y -- 2.34.1

1 1

[PATCH v1 0/4] Add TJA1120 driver support
by Radu Pirea (NXP OSS) 13 Dec '23

13 Dec '23

TJA1120 is a 1Gbps automotive PHY. The nxp-c45-tja11xx driver is updated to support multiple PHYs and TJA1120. Link speed is read from hardware instead of assuming a default value of 100Mbps. Radu P. Radu Pirea (NXP OSS) (4): net: phy: nxp-c45-tja11xx: use local definion of features net: phy: nxp-c45-tja11xx: read PHY the speed from hardware net: phy: nxp-c45-tja11xx: rename nxp_c45_tja11xx structure net: phy: nxp-c45-tja11xx: add tja1120 support drivers/net/phy/nxp-c45-tja11xx.c | 43 ++++++++++++++++++++++++++++--- include/phy.h | 4 --- 2 files changed, 40 insertions(+), 7 deletions(-) -- 2.34.1

1 4

[PATCH v2] clk: zynqmp: enable topsw_lsbus clock
by Venkatesh Yadav Abbarapu 13 Dec '23

13 Dec '23

Display port is using topsw_lsbus clock, it is failing while enabling the clock, so enable the topsw_lsbus clock. Signed-off-by: Sreekanth Sunnam <sreekanth.sunnam(a)amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu(a)amd.com> --- Changes in v2: - Fixed the name to Sreekanth Sunnam. --- drivers/clk/clk_zynqmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c index 1cfe0e25b1..c059b9e8e6 100644 --- a/drivers/clk/clk_zynqmp.c +++ b/drivers/clk/clk_zynqmp.c @@ -844,6 +844,7 @@ static int zynqmp_clk_enable(struct clk *clk) break; case qspi_ref ... can1_ref: case lpd_lsbus: + case topsw_lsbus: clkact_shift = 24; mask = 0x1; break; -- 2.17.1

2 1

[PATCH v1 0/2] Fix host tools build without LIBCRYPTO support
by Paul-Erwan Rio 13 Dec '23

13 Dec '23

A target-independent configuration exists to enable/disable crypto feature when building the host tools. But the crypto-free build is broken. Paul-Erwan Rio (2): tools: kwbimage: disable secure boot build without LIBCRYPTO support tools: fix build without LIBCRYPTO support include/image.h | 2 +- tools/Kconfig | 1 + tools/fit_image.c | 2 +- tools/image-host.c | 2 ++ tools/kwbimage.c | 18 ++++++++++++++++++ tools/mkimage.c | 5 +++-- 6 files changed, 26 insertions(+), 4 deletions(-) -- 2.39.0

5 10

Build failed when CONFIG_TOOLS_LIBCRYPTO is disabled on latest u-boot
by Terry Lv 13 Dec '23

13 Dec '23

Hi Experts, We need to disable CONFIG_TOOLS_LIBCRYPTO in our u-boot. But when I disable CONFIG_TOOLS_LIBCRYPTO from menuconfig, my u-boot build fails. Logs: /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/image-host.o: in function `read_pub_key': image-host.c:(.text+0x8f): undefined reference to `PEM_read_X509' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: image-host.c:(.text+0x9e): undefined reference to `X509_get_pubkey' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: image-host.c:(.text+0xae): undefined reference to `i2d_PublicKey' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: image-host.c:(.text+0xc1): undefined reference to `X509_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `openssl_err': kwbimage.c:(.text+0xbb): undefined reference to `ERR_get_error' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0xd7): undefined reference to `ERR_error_string' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwb_load_rsa_key': kwbimage.c:(.text+0x19d): undefined reference to `PEM_read_RSAPrivateKey' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwb_compute_pubkey_hash': kwbimage.c:(.text+0x278): undefined reference to `EVP_MD_CTX_new' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x28c): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x291): undefined reference to `EVP_sha256' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x29c): undefined reference to `EVP_DigestInit' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x2b6): undefined reference to `EVP_DigestUpdate' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x2ca): undefined reference to `EVP_DigestFinal' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x2d9): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x2e1): undefined reference to `EVP_MD_CTX_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwb_export_pubkey': kwbimage.c:(.text+0x3b2): undefined reference to `RSA_get0_key' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x3c3): undefined reference to `RSA_get0_key' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x3f5): undefined reference to `BN_num_bits' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x408): undefined reference to `BN_num_bits' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x47e): undefined reference to `BN_bn2bin' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x49f): undefined reference to `BN_bn2bin' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwb_verify': kwbimage.c:(.text+0x66f): undefined reference to `EVP_PKEY_new' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x686): undefined reference to `EVP_PKEY_set1_RSA' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x696): undefined reference to `EVP_PKEY_size' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6a6): undefined reference to `EVP_MD_CTX_new' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6ba): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6bf): undefined reference to `EVP_sha256' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6ca): undefined reference to `EVP_DigestInit' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6e2): undefined reference to `EVP_DigestUpdate' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x6fd): undefined reference to `EVP_VerifyFinal' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x71d): undefined reference to `EVP_MD_CTX_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x73b): undefined reference to `EVP_PKEY_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x807): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x80f): undefined reference to `EVP_MD_CTX_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x817): undefined reference to `EVP_PKEY_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwb_sign_and_verify': kwbimage.c:(.text+0x84e): undefined reference to `EVP_PKEY_new' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x865): undefined reference to `EVP_PKEY_set1_RSA' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x875): undefined reference to `EVP_PKEY_size' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x885): undefined reference to `EVP_MD_CTX_new' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x89a): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x89f): undefined reference to `EVP_sha256' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x8ae): undefined reference to `EVP_DigestInit' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x8cc): undefined reference to `EVP_DigestUpdate' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x8ef): undefined reference to `EVP_SignFinal' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x907): undefined reference to `EVP_MD_CTX_reset' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x913): undefined reference to `EVP_MD_CTX_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x91b): undefined reference to `EVP_PKEY_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x93b): undefined reference to `EVP_PKEY_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: kwbimage.c:(.text+0x9ed): undefined reference to `EVP_MD_CTX_free' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `kwbimage_set_header': kwbimage.c:(.text+0x26aa): undefined reference to `d2i_RSAPublicKey' /opt/samba/nxa08304/gcc_cross_toolchain/5.4-zeus/sysroots/x86_64-pokysdk-linux/usr/bin/ld: tools/kwbimage.o: in function `EVP_MD_CTX_cleanup': kwbimage.c:(.text+0x4aa5): undefined reference to `EVP_MD_CTX_reset' collect2: error: ld returned 1 exit status make[1]: *** [scripts/Makefile.host:104: tools/dumpimage] Error 1 make[1]: *** Waiting for unfinished jobs.... Do you know whether there is a patch to fix the issue? Thanks! Regards Terry

2 2

[PATCH] net: wget: Support non-default HTTP port
by Marek Vasut 13 Dec '23

13 Dec '23

Currently the wget command is hard wired to HTTP port 80. This is inconvenient, as it is extremely easy to start trivial HTTP server as an unprivileged user using e.g. python http module to serve the files, but such a server has to run on one of the higher ports: " $ python3 -m http.server -d $(pwd) 8080 " Make it possible to configure HTTP server port the same way it is possible to configure TFTP server port, using environment variable 'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default fallback port. This way, users can start their own trivial server and conveniently download whatever files they need into U-Boot. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: "Ying-Chun Liu (PaulLiu)" <paul.liu(a)linaro.org> Cc: Duncan Hare <DuncanCHare(a)yahoo.com> Cc: Joe Hershberger <joe.hershberger(a)ni.com> Cc: Marek Vasut <marex(a)denx.de> Cc: Ramon Fried <rfried.dev(a)gmail.com> Cc: Simon Glass <sjg(a)chromium.org> --- include/net/wget.h | 1 - net/wget.c | 14 ++++++++++---- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/include/net/wget.h b/include/net/wget.h index da0920de118..6714f7ea573 100644 --- a/include/net/wget.h +++ b/include/net/wget.h @@ -17,6 +17,5 @@ enum wget_state { }; #define DEBUG_WGET 0 /* Set to 1 for debug messages */ -#define SERVER_PORT 80 #define WGET_RETRY_COUNT 30 #define WGET_TIMEOUT 2000UL diff --git a/net/wget.c b/net/wget.c index 8bb4d72db1a..e1e580c8351 100644 --- a/net/wget.c +++ b/net/wget.c @@ -14,6 +14,9 @@ #include <net/tcp.h> #include <net/wget.h> +/* The default, change with environment variable 'httpdstp' */ +#define SERVER_PORT 80 + static const char bootfile1[] = "GET "; static const char bootfile3[] = " HTTP/1.0\r\n\r\n"; static const char http_eom[] = "\r\n\r\n"; @@ -91,19 +94,22 @@ static void wget_send_stored(void) int len = retry_len; unsigned int tcp_ack_num = retry_tcp_seq_num + (len == 0 ? 1 : len); unsigned int tcp_seq_num = retry_tcp_ack_num; + unsigned int server_port; uchar *ptr, *offset; + server_port = env_get_ulong("httpdstp", 10, SERVER_PORT) & 0xffff; + switch (current_wget_state) { case WGET_CLOSED: debug_cond(DEBUG_WGET, "wget: send SYN\n"); current_wget_state = WGET_CONNECTING; - net_send_tcp_packet(0, SERVER_PORT, our_port, action, + net_send_tcp_packet(0, server_port, our_port, action, tcp_seq_num, tcp_ack_num); packets = 0; break; case WGET_CONNECTING: pkt_q_idx = 0; - net_send_tcp_packet(0, SERVER_PORT, our_port, action, + net_send_tcp_packet(0, server_port, our_port, action, tcp_seq_num, tcp_ack_num); ptr = net_tx_packet + net_eth_hdr_size() + @@ -118,14 +124,14 @@ static void wget_send_stored(void) memcpy(offset, &bootfile3, strlen(bootfile3)); offset += strlen(bootfile3); - net_send_tcp_packet((offset - ptr), SERVER_PORT, our_port, + net_send_tcp_packet((offset - ptr), server_port, our_port, TCP_PUSH, tcp_seq_num, tcp_ack_num); current_wget_state = WGET_CONNECTED; break; case WGET_CONNECTED: case WGET_TRANSFERRING: case WGET_TRANSFERRED: - net_send_tcp_packet(0, SERVER_PORT, our_port, action, + net_send_tcp_packet(0, server_port, our_port, action, tcp_seq_num, tcp_ack_num); break; } -- 2.42.0

2 1

[PATCH v1 0/5] Convert recently merged T30 boards to use DM PMIC
by Svyatoslav Ryhel 13 Dec '23

13 Dec '23

Since the proposed PMIC patches have been accepted, I see the need to convert boards which I maintain to use DM drivers instead of board hacks. Svyatoslav Ryhel (5): board: lg-x3: convert LG Optimus 4X and Vu to use DM PMIC board: endeavoru: convert HTC One X to use DM PMIC board: transformer-t30: convert ASUS Transformers to use DM PMIC board: grouper: convert ASUS Google Nexus 7 (2012) to use DM PMIC ARM: dts: tegra30: enable USB PHY node on some devices arch/arm/dts/tegra30-asus-grouper-common.dtsi | 7 + .../dts/tegra30-asus-nexus7-grouper-E1565.dts | 1 + .../dts/tegra30-asus-nexus7-grouper-PM269.dts | 1 + .../dts/tegra30-asus-nexus7-tilapia-E1565.dts | 1 + arch/arm/dts/tegra30-asus-p1801-t.dts | 17 ++ arch/arm/dts/tegra30-asus-tf600t.dts | 15 ++ arch/arm/dts/tegra30-asus-transformer.dtsi | 9 + arch/arm/dts/tegra30-htc-endeavoru.dts | 8 + arch/arm/dts/tegra30-lg-x3.dtsi | 9 + board/asus/grouper/Kconfig | 8 - board/asus/grouper/Makefile | 4 +- .../asus/grouper/configs/grouper_E1565.config | 6 +- .../asus/grouper/configs/grouper_PM269.config | 6 +- board/asus/grouper/configs/tilapia.config | 6 +- board/asus/grouper/grouper-spl-max.c | 2 +- board/asus/grouper/grouper-spl-ti.c | 2 +- board/asus/grouper/grouper.c | 154 +----------------- board/asus/transformer-t30/Kconfig | 10 -- .../transformer-t30/configs/tf600t.config | 2 +- .../transformer-t30/transformer-t30-spl.c | 2 +- board/asus/transformer-t30/transformer-t30.c | 121 +------------- board/htc/endeavoru/endeavoru-spl.c | 2 +- board/htc/endeavoru/endeavoru.c | 72 +------- board/lg/x3-t30/x3-t30-spl.c | 2 +- board/lg/x3-t30/x3-t30.c | 97 +---------- configs/endeavoru_defconfig | 4 + configs/grouper_common_defconfig | 1 + configs/transformer_t30_defconfig | 5 + configs/x3_t30_defconfig | 4 + 29 files changed, 128 insertions(+), 450 deletions(-) -- 2.40.1

4 20

[PATCH v2 0/2] arm: s5p4418: fix relocation
by Stefan Bosch 13 Dec '23

13 Dec '23

Fix relocation of u-boot for s5p4418-SoC. I.e. use __image_copy_start instead of _start to calculate the monitor length. Furthermore use an adapted version of relocate_vectors for the s5p4418-SoC. Background: The header (NSIH) used by the 2nd-bootloader (included at the begin of u-boot.bin) is not loaded into RAM. Therefore _start has to be after the header and therefore is not equal to __image_copy_start which is at the begin of the header. Changes in v2: - Cosmetic: Fix spelling mistake in commit message Stefan Bosch (2): common: board_f: change calculation of gd->mon_len to fix s5p4418 reloc arm: s5p4418: fix relocation of vectors arch/arm/cpu/armv7/s5p4418/Makefile | 3 +++ arch/arm/cpu/armv7/s5p4418/relocate.S | 24 ++++++++++++++++++++++++ common/board_f.c | 2 +- 3 files changed, 28 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/s5p4418/relocate.S -- 2.17.1

3 4