January 2023 - U-Boot

[PATCH v3 0/7] Add video damage tracking
by Alexander Graf 07 Jan '23

07 Jan '23

This patch set speeds up graphics output on ARM by a factor of 60x. On most ARM SBCs, we keep the frame buffer in DRAM and map it as cached, but need it accessible by the display controller which reads directly from a later point of consistency. Hence, we flush the frame buffer to DRAM on every change. The full frame buffer. Unfortunately, with the advent of 4k displays, we are seeing frame buffers that can take a while to flush out. This was reported by Da Xue with grub, which happily print 1000s of spaces on the screen to draw a menu. Every printed space triggers a cache flush. This patch set implements the easiest mitigation against this problem: Damage tracking. We remember the lowest common denominator region that was touched since the last video_sync() call and only flush that. The most typical writer to the frame buffer is the video console, which always writes rectangles of characters on the screen and syncs afterwards. With this patch set applied, we reduce drawing a large grub menu (with serial console attached for size information) on an RK3399-ROC system at 1440p from 55 seconds to less than 1 second. Version 2 also implements VIDEO_COPY using this mechanism, reducing its overhead compared to before as well. So even x86 systems should be faster with this now :). Alternatives considered: 1) Lazy sync - Sandbox does this. It only calls video_sync(true) ever so often. We are missing timers to do this generically. 2) Double buffering - We could try to identify whether anything changed at all and only draw to the FB if it did. That would require maintaining a second buffer that we need to scan. 3) Text buffer - Maintain a buffer of all text printed on the screen with respective location. Don't write if the old and new character are identical. This would limit applicability to text only and is an optimization on top of this patch set. 4) Hash screen lines - Create a hash (sha256?) over every line when it changes. Only flush when it does. I'm not sure if this would waste more time, memory and cache than the current approach. It would make full screen updates much more expensive. v1 -> v2: - new patch: video: Use VIDEO_DAMAGE for VIDEO_COPY - Remove ifdefs - Fix dcache range; we were flushing too much before - Fix ranges in truetype target - Limit rotate to necessary damange v2 -> v3: - Rebase - Adapt to DM_VIDEO always - Make CONFIG_COPY always select VIDEO_DAMAGE Alexander Graf (7): dm: video: Add damage tracking API dm: video: Add damage notification on display clear vidconsole: Add damage notifications to all vidconsole drivers video: Add damage notification on bmp display efi_loader: GOP: Add damage notification on BLT video: Only dcache flush damaged lines video: Use VIDEO_DAMAGE for VIDEO_COPY drivers/video/Kconfig | 19 +++ drivers/video/console_normal.c | 22 ++-- drivers/video/console_rotate.c | 87 +++++++++----- drivers/video/console_truetype.c | 30 ++--- drivers/video/vidconsole-uclass.c | 16 --- drivers/video/video-uclass.c | 185 ++++++++++++++++++------------ drivers/video/video_bmp.c | 7 +- include/video.h | 54 ++++----- include/video_console.h | 49 -------- lib/efi_loader/efi_gop.c | 4 + 10 files changed, 238 insertions(+), 235 deletions(-) -- 2.37.1 (Apple Git-137.1)

3 14

linksys wrt1900acs v2 boot problem
by Dilyan Lazarov 07 Jan '23

07 Jan '23

Hi, I have a problem with my linksys wrt1900acs. My main question is this a hardware problem or software problem? Is it possible to address? I have started researching and have tried with "kwboot" under Windows VM - Ubuntu 20 - Linux but I have a problem with usb serial connection. I have tried several things but I understand that it isn't possible to start USB to Serial on a Windows VM. I will expect your response. Thank you in advance. All the best Dilyan I see the following Log from U-Boot with PuTTy under Windows 10: BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6820 High speed PHY - Version: 2.0 Init RD NAS topology Serdes Lane 3 is USB3 Serdes Lane 4 is SGMII board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | PCIe0 | | 2 | 06 | SATA1 | | 3 | 05 | USB3 HOST1 | | 4 | 05 | PCIe1 | | 5 | 00 | SGMII2 | -------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities :** Link is Gen1, check the EP capability PCIe, Idx 1: remains Gen1 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed WL Supp: IF 0 busId 1 Failed ! WL Supp: IF 0 failed ddr3TipDynamicWriteLevelingSupp failure ******** DRAM initialization Failed (res 0x1) ******** DDR3 run algorithm - FAILED 0x1 DDR3 Training Sequence - FAILED ********** DRAM initialization failed! ******** -- Dilyan

3 2

kwboot : bug when board stops acking
by SC 06 Jan '23

06 Jan '23

Hi list, I think there's a bug in kwboot. I have a faulty board that stops acking xmodem frames after a certain number of packets and kwboot instead of exiting continues to send frames up to 100%. With the one second retry timer it's very long! More than 2 hours :-( The bug is in the kwboot_xm_sendblock() fonction : https://gitlab.denx.de/u-boot/u-boot/blob/master/tools/kwboot.c#L375 kwboot_tty_recv detects the timeout but the return value is based on the last character received (line 403) The variable c is not initialized so if it keeps the previous value which is ACK => rc=0 => infinite loop There are several ways to fix the bug: * Surround the "switch(c)" with a test: if ( !((rc == -1) && (errno == ETIMEDOUT)) ) { rc = -1; switch (c) { case ACK: rc = 0; break; case NAK: errno = EBADMSG; break; case CAN: errno = ECANCELED; break; default: errno = EPROTO; break; } } return rc; * In the case of a TIMEOUT set c to a specific value and add the case in the switch Do you agree with my diagnosis? What is the best solution to fix this bug? Should I provide a patch? Thank you, Stephane

3 2

[PATCH] ARM: omap3: evm: Name this directory omap3
by Andrew Davis 06 Jan '23

06 Jan '23

Before this was named just evm, which doesn't match the naming of the other TI board file directory and makes it look like a common directory for evms. Name this omap3. Signed-off-by: Andrew Davis <afd(a)ti.com> --- arch/arm/mach-omap2/omap3/Kconfig | 2 +- board/ti/{evm => omap3}/Kconfig | 2 +- board/ti/{evm => omap3}/MAINTAINERS | 2 +- board/ti/{evm => omap3}/Makefile | 0 board/ti/{evm => omap3}/evm.c | 0 board/ti/{evm => omap3}/evm.h | 0 6 files changed, 3 insertions(+), 3 deletions(-) rename board/ti/{evm => omap3}/Kconfig (87%) rename board/ti/{evm => omap3}/MAINTAINERS (87%) rename board/ti/{evm => omap3}/Makefile (100%) rename board/ti/{evm => omap3}/evm.c (100%) rename board/ti/{evm => omap3}/evm.h (100%) diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 3e97ec2629..4e9924faf7 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -163,7 +163,7 @@ config SYS_SOC source "board/logicpd/am3517evm/Kconfig" source "board/ti/beagle/Kconfig" source "board/timll/devkit8000/Kconfig" -source "board/ti/evm/Kconfig" +source "board/ti/omap3/Kconfig" source "board/isee/igep00x0/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" diff --git a/board/ti/evm/Kconfig b/board/ti/omap3/Kconfig similarity index 87% rename from board/ti/evm/Kconfig rename to board/ti/omap3/Kconfig index 4f490ddd9d..d60b229a4e 100644 --- a/board/ti/evm/Kconfig +++ b/board/ti/omap3/Kconfig @@ -1,7 +1,7 @@ if TARGET_OMAP3_EVM config SYS_BOARD - default "evm" + default "omap3" config SYS_VENDOR default "ti" diff --git a/board/ti/evm/MAINTAINERS b/board/ti/omap3/MAINTAINERS similarity index 87% rename from board/ti/evm/MAINTAINERS rename to board/ti/omap3/MAINTAINERS index cd315c1635..95b34bbd11 100644 --- a/board/ti/evm/MAINTAINERS +++ b/board/ti/omap3/MAINTAINERS @@ -1,6 +1,6 @@ EVM BOARD M: Derald D. Woods <woods.technical(a)gmail.com> S: Maintained -F: board/ti/evm/ +F: board/ti/omap3/ F: include/configs/omap3_evm.h F: configs/omap3_evm_defconfig diff --git a/board/ti/evm/Makefile b/board/ti/omap3/Makefile similarity index 100% rename from board/ti/evm/Makefile rename to board/ti/omap3/Makefile diff --git a/board/ti/evm/evm.c b/board/ti/omap3/evm.c similarity index 100% rename from board/ti/evm/evm.c rename to board/ti/omap3/evm.c diff --git a/board/ti/evm/evm.h b/board/ti/omap3/evm.h similarity index 100% rename from board/ti/evm/evm.h rename to board/ti/omap3/evm.h -- 2.37.3

3 3

Netgear RN102 U-Boot Nand Driver Modification
by Abdus Rainey 06 Jan '23

06 Jan '23

I have recently modded a Netgear RN102 NAND flash from 128 MB to 4096 MB (Samsung k9gbg08u0a) but i have a problem with NAND initialization. I can boot with kwboot which is unique for Armada CPU's. Here is my log from kwboot with my stock mtd0: root@whitepawnxeon:/home/jigsaw/Downloads# kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0stockuboot.img -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 0 % [......................................................................] 1 % [......................................................................] 1 % [......................................................................] 2 % [......................................................................] 2 % [......................................................................] 3 % [......................................................................] 3 % [......................................................................] 4 % [......................................................................] 5 % [......... General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully .............................................................] 5 % [......................................................................] 6 % [......................................................................] 6 % [......................................................................] 7 % [......................................................................] 7 % [......................................................................] 8 % [......................................................................] 9 % [......................................................................] 9 % [......................................................................] 10 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 11 % [......................................................................] 12 % [......................................................................] 13 % [......................................................................] 13 % [......................................................................] 14 % [......................................................................] 14 % [......................................................................] 15 % [......................................................................] 15 % [......................................................................] 16 % [......................................................................] 17 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 18 % [......................................................................] 19 % [......................................................................] 19 % [......................................................................] 20 % [......................................................................] 21 % [......................................................................] 21 % [......................................................................] 22 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 23 % [......................................................................] 24 % [......................................................................] 25 % [......................................................................] 25 % [......................................................................] 26 % [......................................................................] 26 % [......................................................................] 27 % [......................................................................] 27 % [......................................................................] 28 % [......................................................................] 29 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 30 % [......................................................................] 31 % [......................................................................] 31 % [......................................................................] 32 % [......................................................................] 33 % [......................................................................] 33 % [......................................................................] 34 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 35 % [......................................................................] 36 % [......................................................................] 37 % [......................................................................] 37 % [......................................................................] 38 % [......................................................................] 38 % [......................................................................] 39 % [......................................................................] 39 % [......................................................................] 40 % [......................................................................] 41 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 42 % [......................................................................] 43 % [......................................................................] 43 % [......................................................................] 44 % [......................................................................] 45 % [......................................................................] 45 % [......................................................................] 46 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 47 % [......................................................................] 48 % [......................................................................] 48 % [......................................................................] 49 % [......................................................................] 50 % [......................................................................] 50 % [......................................................................] 51 % [......................................................................] 51 % [......................................................................] 52 % [......................................................................] 52 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 54 % [......................................................................] 55 % [......................................................................] 55 % [......................................................................] 56 % [......................................................................] 56 % [......................................................................] 57 % [......................................................................] 58 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 59 % [......................................................................] 60 % [......................................................................] 60 % [......................................................................] 61 % [......................................................................] 62 % [......................................................................] 62 % [......................................................................] 63 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 64 % [......................................................................] 65 % [......................................................................] 66 % [......................................................................] 66 % [......................................................................] 67 % [......................................................................] 67 % [......................................................................] 68 % [......................................................................] 68 % [......................................................................] 69 % [......................................................................] 70 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 71 % [......................................................................] 72 % [......................................................................] 72 % [......................................................................] 73 % [......................................................................] 74 % [......................................................................] 74 % [......................................................................] 75 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 76 % [......................................................................] 77 % [......................................................................] 78 % [......................................................................] 78 % [......................................................................] 79 % [......................................................................] 79 % [......................................................................] 80 % [......................................................................] 80 % [......................................................................] 81 % [......................................................................] 82 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 83 % [......................................................................] 84 % [......................................................................] 84 % [......................................................................] 85 % [......................................................................] 86 % [......................................................................] 86 % [......................................................................] 87 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 88 % [......................................................................] 89 % [......................................................................] 90 % [......................................................................] 90 % [......................................................................] 91 % [......................................................................] 91 % [......................................................................] 92 % [......................................................................] 92 % [......................................................................] 93 % [......................................................................] 94 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 95 % [......................................................................] 96 % [......................................................................] 96 % [......................................................................] 97 % [......................................................................] 97 % [......................................................................] 98 % [......................................................................] 99 % [......................................................................] 99 % [......................................] [Type Ctrl-\ + c to quit] __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,52 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] As you can see u-boot sees device id and manufacturer id but cannot recognize it.My stock u-boot is very old and i get u-boot source code from Netgear GPL.(ReadyNASOS_V6.6.0_WW_src.zip) In here https://forum.doozan.com/read.php?2,106589,108204#msg-108204 you can see my whole story about this device. Can someone suggest any solution?

2 1

[PATCH] arm: stm32mp: Fix board_get_usable_ram_top() again
by Marek Vasut 06 Jan '23

06 Jan '23

Do not access gd->ram_size and assume this is actual valid RAM size. Since commit 777aaaa706b ("common/memsize.c: Fix get_effective_memsize() to check for overflow") the RAM size may be less than gd->ram_size , call get_effective_memsize() to get the limited value instead. The aforementioned commit makes STM32MP15xx boards with 1 GiB of DRAM at 0xc0000000 hang on boot, which is a grave defect. Signed-off-by: Marek Vasut <marex(a)denx.de> --- Cc: Pali Rohar <pali(a)kernel.org> Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: Patrick Delaunay <patrick.delaunay(a)foss.st.com> Cc: Tom Rini <trini(a)konsulko.com> --- arch/arm/mach-stm32mp/dram_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 9346fa8546d..80ba5c27741 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -51,7 +51,7 @@ phys_size_t board_get_usable_ram_top(phys_size_t total_size) /* found enough not-reserved memory to relocated U-Boot */ lmb_init(&lmb); - lmb_add(&lmb, gd->ram_base, gd->ram_size); + lmb_add(&lmb, gd->ram_base, get_effective_memsize()); boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob); /* add 8M for reserved memory for display, fdt, gd,... */ size = ALIGN(SZ_8M + CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE), -- 2.39.0

3 13

[PULL] Pull request for u-boot master / v2023.01 = u-boot-stm32-20230106
by Patrick DELAUNAY 06 Jan '23

06 Jan '23

Hi Tom, Please pull the STM32 related fixes for u-boot/master, v2023.01: u-boot-stm32-20230106 - stm32mp: Fix board_get_usable_ram_top(): workaround to avoid issue after the commit 777aaaa706b ("common/memsize.c: Fix get_effective_memsize() to check for overflow") because the effective DDR effective size is reduce by 4KiB and sometime the board hang on boot CI status: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/14623 This last patch for v2023.01 avoids a hang on 1GB DDR STM32MP15 board detected by Marek and caused by Pali patch. For my point a view , this patch is an acceptable workaround for master branch and v2023.01 delivery but the initial patch should be revisited or reverted (in master or in next ?). For details see comments in patch "arm: stm32mp: Fix board_get_usable_ram_top() again" http://patchwork.ozlabs.org/project/uboot/patch/20230105012222.238075-1-mar… https://lore.kernel.org/u-boot/20230105012222.238075-1-marex@denx.de/ Thanks, Patrick ===== The following changes since commit 8d6cbf5e6bc4e10e38b954763fa025caed517cc2: Merge tag 'efi-2023-01-rc5-3' of https://source.denx.de/u-boot/custodians/u-boot-efi (2023-01-04 08:50:24 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20230106 for you to fetch changes up to a2e0b041d662e4c80502cd5c9a8326d026f9deb1: arm: stm32mp: Fix board_get_usable_ram_top() again (2023-01-06 11:02:17 +0100) ---------------------------------------------------------------- - stm32mp: Fix board_get_usable_ram_top(): workaround to avoid issue after the commit 777aaaa706b ("common/memsize.c: Fix get_effective_memsize() to check for overflow") because the effective DDR effective size is reduce by 4KiB and sometime the board hang on boot ---------------------------------------------------------------- Marek Vasut (1): arm: stm32mp: Fix board_get_usable_ram_top() again arch/arm/mach-stm32mp/dram_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

2 1

[PATCH] arm: rmobile: rzg2_beacon: Enable alternative Ethernet PHY
by Adam Ford 06 Jan '23

06 Jan '23

Due to the part shortage, the AR8031 PHY was replaced with a Micrel KSZ9131. Enabling both config options keeps backward compatibility with either platform, and both appear to be auto-detected. Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig index 36787057a2..b4ea6c630a 100644 --- a/configs/rzg2_beacon_defconfig +++ b/configs/rzg2_beacon_defconfig @@ -68,6 +68,8 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_BITBANGMII=y CONFIG_BITBANGMII_MULTI=y CONFIG_PHY_ATHEROS=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_RENESAS_RAVB=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y -- 2.34.1

3 3

[PATCH] arm: dts: rz-g2-beacon-u-boot: Fix QSPI Regression
by Adam Ford 06 Jan '23

06 Jan '23

The QSPI is accessed via the RPC-IF, but the compatible flags previously used a different name. This compatibel name was changed which broke the ability to access the QSPI. Fix this by removing the custom naming reference. Fixes: 68083b897b57 ("renesas: Fix RPC-IF compatible values") Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/arch/arm/dts/rz-g2-beacon-u-boot.dtsi b/arch/arm/dts/rz-g2-beacon-u-boot.dtsi index 4d17854918..da1c3b0939 100644 --- a/arch/arm/dts/rz-g2-beacon-u-boot.dtsi +++ b/arch/arm/dts/rz-g2-beacon-u-boot.dtsi @@ -45,7 +45,6 @@ }; &rpc { - compatible = "renesas,rcar-gen3-rpc"; pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; num-cs = <1>; -- 2.34.1

3 2

[PATCH] pylibfdt: Fix disable version normalization
by Philippe Schenker 06 Jan '23

06 Jan '23

From: Philippe Schenker <philippe.schenker(a)toradex.com> On Arch Linux based systems python setuptools does not contain "setuptools.extern" hence it is failing with the following error-message: " ModuleNotFoundError: No module named 'setuptools.extern' " According to a eschwartz `setuptools.extern` is not a public API and shall not be assumed to be present in the setuptools package. He mentions that the setuptools project anyway wants to drop this. [1] Use the correct solution introduced by python setuptools developers to disable normalization. [2] [1] https://bbs.archlinux.org/viewtopic.php?id=259608 [2] https://github.com/pypa/setuptools/pull/2026 Fixes: 440098c42e73 ("pylibfdt: Fix version normalization warning") Signed-off-by: Philippe Schenker <philippe.schenker(a)toradex.com> --- scripts/dtc/pylibfdt/setup.py | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/scripts/dtc/pylibfdt/setup.py b/scripts/dtc/pylibfdt/setup.py index 9abdb57595ad..c07f65e6bcaf 100755 --- a/scripts/dtc/pylibfdt/setup.py +++ b/scripts/dtc/pylibfdt/setup.py @@ -20,16 +20,12 @@ allows this script to be run stand-alone, e.g.: ./pylibfdt/setup.py install [--prefix=...] """ -from setuptools import setup, Extension +from setuptools import setup, Extension, sic from setuptools.command.build_py import build_py as _build_py -from setuptools.extern.packaging import version import os import re import sys -# Disable version normalization -version.Version = version.LegacyVersion - srcdir = os.path.dirname(__file__) with open(os.path.join(srcdir, "../README"), "r") as fh: @@ -141,7 +137,7 @@ class build_py(_build_py): setup( name='libfdt', - version=version, + version=sic(version), cmdclass = {'build_py' : build_py}, author='Simon Glass', author_email='sjg(a)chromium.org', -- 2.39.0

4 5