May 2022 - U-Boot

[PATCH v1 0/2] spi: stm32_qspi: flags management fixes
by Patrice Chotard 20 May '22

20 May '22

This series update flags management in the following cases: - Always check TCF flag in stm32_qspi_wait_cmd() - Don't check BUSY flag when sending new command Patrice Chotard (2): spi: stm32_qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd() spi: stm32_qspi: Remove SR_BUSY bit check before sending command drivers/spi/stm32_qspi.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) -- 2.25.1

2 6

[PATCH] ARM: dts: stm32: Configure Buck3 voltage per PMIC NVM on Avenger96
by Marek Vasut 20 May '22

20 May '22

The Avenger96 board comes in multiple regulator configurations. - rev.100 or rev.200 have Buck3 preconfigured to 3V3 operation on boot and contains extra Enpirion EP53A8LQI DCDC converter which supplies the IO. Reduce Buck3 voltage to 2V9 to not waste power. - rev.200L have Buck3 preconfigured to 1V8 operation and have no Enpirion EP53A8LQI DCDC anymore, the IO is supplied from Buck3. Configure the Buck3 voltage on this board per PMIC NVM settings and update buck3 voltage limits in DT passed to OS before booting OS to prevent potential hardware damage. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Patrice Chotard <patrice.chotard(a)foss.st.com> Cc: Patrick Delaunay <patrick.delaunay(a)foss.st.com> --- arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi | 2 +- board/dhelectronics/dh_stm32mp1/board.c | 109 +++++++++++++++++++++- 2 files changed, 107 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi index 9937b28548c..e20917824bf 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -19,7 +19,7 @@ }; &vdd { - regulator-min-microvolt = <2900000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2900000>; }; diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index 67273f90992..d407f0bf592 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -594,14 +594,98 @@ static void board_init_fmc2(void) setbits_le32(STM32_FMC2_BASE + STM32_FMC2_BCR1, STM32_FMC2_BCRx_FMCEN); } +#ifdef CONFIG_DM_REGULATOR +#define STPMIC_NVM_BUCKS_VOUT_SHR 0xfc +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_1V2 0 +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_1V8 1 +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V0 2 +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V3 3 +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_MASK GENMASK(1, 0) +#define STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_OFFSET(n) ((((n) - 1) & 3) * 2) +static int board_get_regulator_buck3_nvm_uv_av96(int *uv) +{ + const void *fdt = gd->fdt_blob; + struct udevice *dev; + u8 bucks_vout = 0; + const char *prop; + int len, ret; + + /* Check whether this is Avenger96 board. */ + prop = fdt_getprop(fdt, 0, "compatible", &len); + if (!prop || !len) + return -ENODEV; + + if (!strstr(prop, "avenger96")) + return -EINVAL; + + /* Read out STPMIC1 NVM and determine default Buck3 voltage. */ + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_DRIVER_GET(stpmic1_nvm), + &dev); + if (ret) + return ret; + + ret = misc_read(dev, STPMIC_NVM_BUCKS_VOUT_SHR, &bucks_vout, 1); + if (ret != 1) + return -EINVAL; + + bucks_vout >>= STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_OFFSET(3); + bucks_vout &= STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_MASK; + + /* + * Avenger96 board comes in multiple regulator configurations: + * - rev.100 or rev.200 have Buck3 preconfigured to 3V3 operation on + * boot and contains extra Enpirion EP53A8LQI DCDC converter which + * supplies the IO. Reduce Buck3 voltage to 2V9 to not waste power. + * - rev.200L have Buck3 preconfigured to 1V8 operation and have no + * Enpirion EP53A8LQI DCDC anymore, the IO is supplied from Buck3. + */ + if (bucks_vout == STPMIC_NVM_BUCKS_VOUT_SHR_BUCK_3V3) + *uv = 2900000; + else + *uv = 1800000; + + return 0; +} + +static void board_init_regulator_av96(void) +{ + struct udevice *rdev; + int ret, uv; + + ret = board_get_regulator_buck3_nvm_uv_av96(&uv); + if (ret) /* Not Avenger96 board. */ + return; + + ret = regulator_get_by_devname("buck3", &rdev); + if (ret) + return; + + /* Adjust Buck3 per preconfigured PMIC voltage from NVM. */ + regulator_set_value(rdev, uv); +} + +static void board_init_regulator(void) +{ + board_init_regulator_av96(); + + regulators_enable_boot_on(_DEBUG); +} +#else +static inline int board_get_regulator_buck3_nvm_uv_av96(int *uv) +{ + return -EINVAL; +} + +static inline void board_init_regulator(void) {} +#endif + /* board dependent setup after realloc */ int board_init(void) { board_key_check(); -#ifdef CONFIG_DM_REGULATOR - regulators_enable_boot_on(_DEBUG); -#endif + board_init_regulator(); sysconf_init(); @@ -721,6 +805,25 @@ int board_interface_eth_init(struct udevice *dev, #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { + const char *buck3path = "/soc/i2c@5c002000/stpmic@33/regulators/buck3"; + int buck3off, ret, uv; + + ret = board_get_regulator_buck3_nvm_uv_av96(&uv); + if (ret) /* Not Avenger96 board, do not patch Buck3 in DT. */ + return 0; + + buck3off = fdt_path_offset(blob, buck3path); + if (buck3off < 0) /* No Buck3 regulator found. */ + return 0; + + ret = fdt_setprop_u32(blob, buck3off, "regulator-min-microvolt", uv); + if (ret < 0) + return ret; + + ret = fdt_setprop_u32(blob, buck3off, "regulator-max-microvolt", uv); + if (ret < 0) + return ret; + return 0; } #endif -- 2.35.1

2 10

[PATCH v3 2/2] boot: build arch/*/lib/bootm.c if support boot linux
by Rover Mo 20 May '22

20 May '22

arch/*/lib/bootm.c is for the boot Linux commands, not just for bootm command. This commit makes CONFIG_BOOTM_LINUX selected by the boot Linux commands and arch/*/lib/bootm.c will be built if enabled CONFIG_BOOTM_LINUX. Signed-off-by: Rover Mo <myzmzz(a)126.com> --- arch/arc/lib/Makefile | 2 +- arch/arm/lib/Makefile | 6 +++--- arch/m68k/lib/Makefile | 2 +- arch/microblaze/lib/Makefile | 2 +- arch/mips/lib/Makefile | 2 +- arch/nios2/lib/Makefile | 2 +- arch/powerpc/lib/Makefile | 2 +- arch/riscv/lib/Makefile | 4 ++-- arch/sandbox/lib/Makefile | 3 +-- arch/sh/lib/Makefile | 2 +- arch/x86/lib/Makefile | 2 +- arch/xtensa/lib/Makefile | 2 +- cmd/Kconfig | 3 +++ 13 files changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile index 0eb44bcf33..777380b36d 100644 --- a/arch/arc/lib/Makefile +++ b/arch/arc/lib/Makefile @@ -12,6 +12,6 @@ obj-y += reset.o obj-y += ints_low.o obj-y += init_helpers.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _millicodethunk.o libgcc2.o diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c603fe61bc..c446219b4b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -30,9 +30,9 @@ endif obj-$(CONFIG_CPU_V7M) += cmd_boot.o obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o -obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o -obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o +obj-$(CONFIG_CMD_BOOTI) += image.o +obj-$(CONFIG_CMD_BOOTZ) += zimage.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o else obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index b66d66afd2..7fdedf6ad8 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -8,7 +8,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += lshrdi3.o muldi3.o ashldi3.o obj-y += bdinfo.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += cache.o obj-y += interrupts.o obj-y += time.o diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 05f447abba..b523d18a78 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -3,5 +3,5 @@ # (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += muldi3.o diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 9ee1fcb5c7..0fc66f1c49 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -10,7 +10,7 @@ obj-y += reloc.o obj-y += stack.o obj-y += traps.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/nios2/lib/Makefile b/arch/nios2/lib/Makefile index a9f3c7100e..fdd671a3b8 100644 --- a/arch/nios2/lib/Makefile +++ b/arch/nios2/lib/Makefile @@ -4,5 +4,5 @@ # Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. obj-y += cache.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += libgcc.o diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2782740bf5..16374e33fb 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -33,7 +33,7 @@ endif obj-y += reloc.o obj-$(CONFIG_BAT_RW) += bat_rw.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += cache.o obj-y += extable.o obj-y += interrupts.o diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 06020fcc2a..48d6366136 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -6,8 +6,8 @@ # Copyright (C) 2017 Andes Technology Corporation # Rick Chen, Andes Technology Corporation <rick(a)andestech.com> -obj-$(CONFIG_CMD_BOOTM) += bootm.o -obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o +obj-$(CONFIG_CMD_BOOTI) += image.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o diff --git a/arch/sandbox/lib/Makefile b/arch/sandbox/lib/Makefile index a2bc5a7ee6..a0eedf0273 100644 --- a/arch/sandbox/lib/Makefile +++ b/arch/sandbox/lib/Makefile @@ -7,5 +7,4 @@ obj-y += fdt_fixup.o interrupts.o sections.o obj-$(CONFIG_PCI) += pci_io.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o -obj-$(CONFIG_CMD_BOOTZ) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index e7520a328d..840edf2942 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -6,7 +6,7 @@ extra-y += start.o obj-y += board.o -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += time.o obj-$(CONFIG_CMD_SH_ZIMAGEBOOT) += zimageboot.o diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index a6f2244147..9f99b78679 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -13,7 +13,7 @@ endif obj-y += string.o endif ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o endif obj-y += cmd_boot.o obj-$(CONFIG_$(SPL_)COREBOOT_SYSINFO) += coreboot/ diff --git a/arch/xtensa/lib/Makefile b/arch/xtensa/lib/Makefile index ad4fe32cb6..4c54b845e2 100644 --- a/arch/xtensa/lib/Makefile +++ b/arch/xtensa/lib/Makefile @@ -3,6 +3,6 @@ # (C) Copyright 2007 - 2013 Tensilica Inc. # (C) Copyright 2014 - 2016 Cadence Design Systems Inc. -obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_BOOTM_LINUX) += bootm.o obj-y += cache.o misc.o relocate.o time.o diff --git a/cmd/Kconfig b/cmd/Kconfig index 6baa85bfdd..46291b3b07 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -197,6 +197,7 @@ config CMD_BOOTD config CMD_BOOTM bool "bootm" + select BOOTM_LINUX default y help Boot an application image from the memory. @@ -259,6 +260,7 @@ config BOOTM_EFI config CMD_BOOTZ bool "bootz" + select BOOTM_LINUX default y if !FIT_SIGNATURE && !EFI_SECURE_BOOT help Boot the Linux zImage @@ -268,6 +270,7 @@ config CMD_BOOTZ config CMD_BOOTI bool "booti" + select BOOTM_LINUX depends on ARM64 || RISCV default y if !FIT_SIGNATURE && !EFI_SECURE_BOOT help -- 2.25.1

2 1

[PATCH] usb: dwc3: Fix support for usb3-phy PHY configuration
by Marek Vasut 20 May '22

20 May '22

The dev_read_stringlist_search() in generic_phy_get_by_name() returns -ENODATA in case of missing "phy-names", which is the case on everything except ZynqMP. Handle this -ENODATA instead of failing outright, which fixes the glue on everything else. Fixes: 142d50fbce7 ("usb: dwc3: Add support for usb3-phy PHY configuration") Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Michal Simek <michal.simek(a)xilinx.com> --- drivers/usb/dwc3/dwc3-generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index 6e1a1d066b4..9608c5c599a 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -468,7 +468,7 @@ static int dwc3_glue_probe(struct udevice *dev) ret = generic_phy_init(&phy); if (ret) return ret; - } else if (ret != -ENOENT) { + } else if (ret != -ENOENT && ret != -ENODATA) { debug("could not get phy (err %d)\n", ret); return ret; } -- 2.35.1

2 1

[PATCH v3 0/2] boot: don't enable the non-secure boot commands by default if secure boot enabled
by Rover Mo 20 May '22

20 May '22

Changes for v3: - Add [2/2] for fixing build error on iot_devkit Changes for v2: - Don't enable the non-secure boot commands too if !EFI_SECURE_BOOT - Update the help information - Changed commit title Rover Mo (2): boot: don't enable the non-secure boot commands by default if secure boot enabled boot: build arch/*/lib/bootm.c if support boot linux arch/arc/lib/Makefile | 2 +- arch/arm/lib/Makefile | 6 +++--- arch/m68k/lib/Makefile | 2 +- arch/microblaze/lib/Makefile | 2 +- arch/mips/lib/Makefile | 2 +- arch/nios2/lib/Makefile | 2 +- arch/powerpc/lib/Makefile | 2 +- arch/riscv/lib/Makefile | 4 ++-- arch/sandbox/lib/Makefile | 3 +-- arch/sh/lib/Makefile | 2 +- arch/x86/lib/Makefile | 2 +- arch/xtensa/lib/Makefile | 2 +- boot/Kconfig | 2 +- cmd/Kconfig | 14 ++++++++++++-- 14 files changed, 28 insertions(+), 19 deletions(-) -- 2.25.1

1 0

[PATCH] ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
by Marek Vasut 19 May '22

19 May '22

Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Fabio Estevam <festevam(a)denx.de> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Stefano Babic <sbabic(a)denx.de> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi | 141 ++ arch/arm/dts/imx8mp-dhcom-pdk2.dts | 152 ++ arch/arm/dts/imx8mp-dhcom-som.dtsi | 1042 ++++++++++ arch/arm/mach-imx/imx8m/Kconfig | 8 + board/dhelectronics/dh_imx8mp/Kconfig | 15 + board/dhelectronics/dh_imx8mp/MAINTAINERS | 8 + board/dhelectronics/dh_imx8mp/Makefile | 13 + board/dhelectronics/dh_imx8mp/common.c | 37 + .../dh_imx8mp/imx8mp_dhcom_pdk2.c | 186 ++ .../dh_imx8mp/imximage-lpddr4.cfg | 8 + board/dhelectronics/dh_imx8mp/lpddr4_timing.h | 13 + .../dh_imx8mp/lpddr4_timing_4G_32.c | 1844 +++++++++++++++++ board/dhelectronics/dh_imx8mp/spl.c | 187 ++ configs/imx8mp_dhcom_pdk2_defconfig | 246 +++ include/configs/imx8mp_dhcom_pdk2.h | 116 ++ 16 files changed, 4017 insertions(+) create mode 100644 arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mp-dhcom-pdk2.dts create mode 100644 arch/arm/dts/imx8mp-dhcom-som.dtsi create mode 100644 board/dhelectronics/dh_imx8mp/Kconfig create mode 100644 board/dhelectronics/dh_imx8mp/MAINTAINERS create mode 100644 board/dhelectronics/dh_imx8mp/Makefile create mode 100644 board/dhelectronics/dh_imx8mp/common.c create mode 100644 board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c create mode 100644 board/dhelectronics/dh_imx8mp/imximage-lpddr4.cfg create mode 100644 board/dhelectronics/dh_imx8mp/lpddr4_timing.h create mode 100644 board/dhelectronics/dh_imx8mp/lpddr4_timing_4G_32.c create mode 100644 board/dhelectronics/dh_imx8mp/spl.c create mode 100644 configs/imx8mp_dhcom_pdk2_defconfig create mode 100644 include/configs/imx8mp_dhcom_pdk2.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 83630af4f67..576206cb4b0 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -936,6 +936,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mn-beacon-kit.dtb \ imx8mq-mnt-reform2.dtb \ imx8mq-phanbell.dtb \ + imx8mp-dhcom-pdk2.dtb \ imx8mp-evk.dtb \ imx8mp-phyboard-pollux-rdk.dtb \ imx8mp-venice.dtb \ diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi new file mode 100644 index 00000000000..ae838caebcf --- /dev/null +++ b/arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex(a)denx.de> + */ + +#include "imx8mp-u-boot.dtsi" + +/ { + aliases { + eeprom0 = &eeprom0; + eeprom1 = &eeprom1; + mmc0 = &usdhc2; /* MicroSD */ + mmc1 = &usdhc3; /* eMMC */ + mmc2 = &usdhc1; /* SDIO */ + }; + + config { + dh,ram-coding-gpios = <&gpio3 22 0>, <&gpio3 23 0>, <&gpio3 24 0>; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; +}; + +&buck4 { + u-boot,dm-spl; +}; + +&buck5 { + u-boot,dm-spl; +}; + +&eqos { + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + /delete-property/ assigned-clock-rates; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&i2c3 { + u-boot,dm-spl; +}; + +&pinctrl_i2c3 { + u-boot,dm-spl; +}; + +&pinctrl_i2c3_gpio { + u-boot,dm-spl; +}; + +&pinctrl_pmic { + u-boot,dm-spl; +}; + +&pinctrl_uart1 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_200mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc2_vmmc { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3 { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3_100mhz { + u-boot,dm-spl; +}; + +&pinctrl_usdhc3_100mhz { + u-boot,dm-spl; +}; + +&pmic { + u-boot,dm-spl; + + regulators { + u-boot,dm-spl; + }; +}; + +&reg_usdhc2_vmmc { + u-boot,dm-spl; +}; + +&uart1 { + u-boot,dm-spl; +}; + +/* SDIO WiFi */ +&usdhc1 { + status = "disabled"; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; + +&wdog1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts new file mode 100644 index 00000000000..e95abfb3e89 --- /dev/null +++ b/arch/arm/dts/imx8mp-dhcom-pdk2.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex(a)denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx8mp-dhcom-pdk2", "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + #size-cells = <0>; + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */ + label = "TA4-GPIO-D"; + linux,code = <KEY_D>; + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-5 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */ + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-7 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */ + pinctrl-0 = <&pinctrl_dhcom_h>; + pinctrl-names = "default"; + }; + + led-8 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; +}; + +/* + * PDK2 carrier board uses SoM with KSZ9131 populated and connected to + * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node. + */ +/delete-node/ &ethphy0f; + +/* + * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC + * ethernet RGMII interface. The SoM is not populated with second FEC PHY. + */ +/delete-node/ &ethphy1f; + +&fec { /* Second ethernet */ + phy-handle = <&ethphypdk>; + + mdio { + ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <7>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + max-speed = <100>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&usb3_1 { + fsl,over-current-active-low; +}; diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi new file mode 100644 index 00000000000..63cc6c92c41 --- /dev/null +++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi @@ -0,0 +1,1042 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021-2022 Marek Vasut <marex(a)denx.de> + */ + +#include "imx8mp.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM SoM"; + compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + rtc0 = &rv3032; + rtc1 = &snvs_rtc; + spi0 = &flexspi; + }; + + memory@40000000 { + device_type = "memory"; + /* Memory size 512 MiB..8 GiB will be filled by U-Boot */ + reg = <0x0 0x40000000 0 0x08000000>; + }; + + reg_eth_vio: regulator-eth-vio { + compatible = "regulator-fixed"; + gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_enet_vio>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "eth_vio"; + vin-supply = <&buck4>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 19 0>; /* SD2_RESET */ + off-on-delay-us = <12000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_SD"; + startup-delay-us = <100>; + vin-supply = <&buck4>; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&eqos { /* First ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <&ethphy0g>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one of these two PHYs may be populated. */ + ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + + ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + pinctrl-0 = <&pinctrl_ethphy0>; + pinctrl-names = "default"; + reg = <5>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + /* Default PHY population option. */ + status = "okay"; + }; + }; +}; + +&fec { /* Second ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-handle = <&ethphy1f>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Up to one PHY may be populated. */ + ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + compatible = "ethernet-phy-id0007.c110", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <1>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + /* Non-default PHY population option. */ + status = "disabled"; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { /* W25Q128JWPIM */ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L", + "DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "DHCOM-K", "", "", "", "", + "", "", "", "", "DHCOM-INT", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "SOM-HW0", "", + "", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1", + "SOM-MEM2", "SOM-HW2", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "SOM-HW1", "", "", "", "", + "", "", "", "DHCOM-D", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "DHCOM-C", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "DHCOM-E", "DHCOM-F", + "", "", "", "", "", "", "", ""; +}; + +&i2c3 { + /* + * iMX8MP 1P33A Errata ERR007805 + * I2C is limited to 384 kHz due to SoC bug. + */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * i.MX 8M Plus Data Sheet for Consumer Products + * 3.1.4 Operating ranges + * MIMX8ML8CVNKZAB + */ + regulators { + buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ + regulator-compatible = "BUCK1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck2: BUCK2 { /* VDD_ARM */ + regulator-compatible = "BUCK2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-compatible = "BUCK4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-compatible = "BUCK5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-compatible = "BUCK6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-compatible = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-compatible = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4: LDO4 { /* PMIC_LDO4 */ + regulator-compatible = "LDO4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-compatible = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + adc@48 { + compatible = "ti,tla2024"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* Voltage over AIN0 and AIN1. */ + reg = <0>; + }; + + channel@1 { /* Voltage over AIN0 and AIN3. */ + reg = <1>; + }; + + channel@2 { /* Voltage over AIN1 and AIN3. */ + reg = <2>; + }; + + channel@3 { /* Voltage over AIN2 and AIN3. */ + reg = <3>; + }; + + channel@4 { /* Voltage over AIN0 and GND. */ + reg = <4>; + }; + + channel@5 { /* Voltage over AIN1 and GND. */ + reg = <5>; + }; + + channel@6 { /* Voltage over AIN2 and GND. */ + reg = <6>; + }; + + channel@7 { /* Voltage over AIN3 and GND. */ + reg = <7>; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + vio-supply = <&buck4>; + }; + + eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + }; + + eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */ + compatible = "atmel,24c02"; + pagesize = <16>; + reg = <0x53>; + }; +}; + +&i2c4 { + /* + * iMX8MP 1P33A Errata ERR007805 + * I2C is limited to 384 kHz due to SoC bug. + */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c5 { /* HDMI EDID bus */ + /* + * iMX8MP 1P33A Errata ERR007805 + * I2C is limited to 384 kHz due to SoC bug. + */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&uart1 { + /* CA53 console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* Bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_vbus>; + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 2AE */ + reg = <1>; + compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; + /* + * The "host-wake" interrupt output is by default not + * connected to the SoC, but can be connected on to + * SoC pin on the carrier board. + */ + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <&reg_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c + &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f + &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i + &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l + /* GPIO_M is connected to CLKOUT2 */ + &pinctrl_dhcom_int>; + pinctrl-names = "default"; + + pinctrl_dhcom_a: dhcom-a-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-OUT */ + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2 + >; + }; + + pinctrl_dhcom_b: dhcom-b-grp { + fsl,pins = < + /* ENET_QOS_EVENT0-IN */ + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2 + >; + }; + + pinctrl_dhcom_c: dhcom-c-grp { + fsl,pins = < + /* GPIO_C */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2 + >; + }; + + pinctrl_dhcom_d: dhcom-d-grp { + fsl,pins = < + /* GPIO_D */ + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2 + >; + }; + + pinctrl_dhcom_e: dhcom-e-grp { + fsl,pins = < + /* GPIO_E */ + MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2 + >; + }; + + pinctrl_dhcom_f: dhcom-f-grp { + fsl,pins = < + /* GPIO_F */ + MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2 + >; + }; + + pinctrl_dhcom_g: dhcom-g-grp { + fsl,pins = < + /* GPIO_G */ + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2 + >; + }; + + pinctrl_dhcom_h: dhcom-h-grp { + fsl,pins = < + /* GPIO_H */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2 + >; + }; + + pinctrl_dhcom_i: dhcom-i-grp { + fsl,pins = < + /* CSI1_SYNC */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 + >; + }; + + pinctrl_dhcom_j: dhcom-j-grp { + fsl,pins = < + /* CSIx_#RST */ + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2 + >; + }; + + pinctrl_dhcom_k: dhcom-k-grp { + fsl,pins = < + /* CSIx_PWDN */ + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2 + >; + }; + + pinctrl_dhcom_l: dhcom-l-grp { + fsl,pins = < + /* CSI2_SYNC */ + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2 + >; + }; + + pinctrl_dhcom_int: dhcom-int-grp { + fsl,pins = < + /* INT_HIGHEST_PRIO */ + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2 + >; + }; + + pinctrl_hog_base: dhcom-hog-base-grp { + fsl,pins = < + /* GPIOs for memory coding */ + MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080 + MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080 + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080 + /* GPIOs for hardware coding */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080 + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080 + MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080 + >; + }; + + pinctrl_ecspi1: dhcom-ecspi1-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_ecspi2: dhcom-ecspi2-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + >; + }; + + pinctrl_enet_vio: dhcom-enet-vio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 + >; + }; + + pinctrl_ethphy0: dhcom-ethphy0-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 + >; + }; + + pinctrl_ethphy1: dhcom-ethphy1-grp { + fsl,pins = < + /* ENET1_#RST Reset */ + MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11 + /* ENET1_#INT Interrupt */ + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11 + >; + }; + + pinctrl_fec: dhcom-fec-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f + >; + }; + + pinctrl_flexcan1: dhcom-flexcan1-grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: dhcom-flexcan2-grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 + MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 + >; + }; + + pinctrl_flexspi: dhcom-flexspi-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + + pinctrl_hdmi: dhcom-hdmi-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154 + >; + }; + + pinctrl_i2c3: dhcom-i2c3-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: dhcom-i2c4-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 + MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 + >; + }; + + pinctrl_i2c5: dhcom-i2c5-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084 + >; + }; + + pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 + MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 + >; + }; + + pinctrl_pmic: dhcom-pmic-grp { + fsl,pins = < + /* PMIC_nINT */ + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + >; + }; + + pinctrl_pwm1: dhcom-pwm1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6 + >; + }; + + pinctrl_rtc: dhcom-rtc-grp { + fsl,pins = < + /* RTC_#INT Interrupt */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6 + >; + }; + + pinctrl_touch: dhcom-touch-grp { + fsl,pins = < + /* #TOUCH_INT */ + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080 + >; + }; + + pinctrl_uart1: dhcom-uart1-grp { + fsl,pins = < + /* Console UART */ + MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49 + MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 + MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49 + >; + }; + + pinctrl_uart2: dhcom-uart2-grp { + fsl,pins = < + /* Bluetooth UART */ + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 + MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 + >; + }; + + pinctrl_uart3: dhcom-uart3-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49 + MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49 + MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49 + >; + }; + + pinctrl_uart4: dhcom-uart4-grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usb0_vbus: dhcom-usb0-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0 + >; + }; + + pinctrl_usb1_vbus: dhcom-usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6 + MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80 + >; + }; + + pinctrl_usdhc1: dhcom-usdhc1-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 + /* BT_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144 + /* WL_REG_EN */ + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144 + >; + }; + + pinctrl_usdhc2: dhcom-usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 + >; + }; + + pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 + >; + }; + + pinctrl_usdhc3: dhcom-usdhc3-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_wdog: dhcom-wdog-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 24299ae037f..61397bf88d1 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -148,6 +148,13 @@ config TARGET_IMX8MN_VENICE select GATEWORKS_SC select MISC +config TARGET_IMX8MP_DH_DHCOM_PDK2 + bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus" + select BINMAN + select IMX8MP + select IMX8M_LPDDR4 + select SUPPORT_SPL + config TARGET_IMX8MP_EVK bool "imx8mp LPDDR4 EVK board" select BINMAN @@ -265,6 +272,7 @@ source "board/beacon/imx8mn/Kconfig" source "board/bsh/imx8mn_smm_s2/Kconfig" source "board/compulab/imx8mm-cl-iot-gate/Kconfig" source "board/data_modul/imx8mm_edm_sbc/Kconfig" +source "board/dhelectronics/dh_imx8mp/Kconfig" source "board/engicam/imx8mm/Kconfig" source "board/freescale/imx8mq_evk/Kconfig" source "board/freescale/imx8mm_evk/Kconfig" diff --git a/board/dhelectronics/dh_imx8mp/Kconfig b/board/dhelectronics/dh_imx8mp/Kconfig new file mode 100644 index 00000000000..8fb80a0ff18 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/Kconfig @@ -0,0 +1,15 @@ +if TARGET_IMX8MP_DH_DHCOM_PDK2 + +config SYS_BOARD + default "dh_imx8mp" + +config SYS_VENDOR + default "dhelectronics" + +config SYS_CONFIG_NAME + default "imx8mp_dhcom_pdk2" + +config IMX_CONFIG + default "board/dhelectronics/dh_imx8mp/imximage-lpddr4.cfg" + +endif diff --git a/board/dhelectronics/dh_imx8mp/MAINTAINERS b/board/dhelectronics/dh_imx8mp/MAINTAINERS new file mode 100644 index 00000000000..7c70cfdd949 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/MAINTAINERS @@ -0,0 +1,8 @@ +DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus +M: Marek Vasut <marex(a)denx.de> +S: Maintained +F: arch/arm/dts/imx8mp-dhcom-pdk2.dts +F: arch/arm/dts/imx8mp-dhcom-pdk2-u-boot.dtsi +F: board/dhelectronics/imx8mp_dhcom_pdk2/ +F: configs/imx8mp_dhcom_pdk2_defconfig +F: include/configs/imx8mp_dhcom_pdk2.h diff --git a/board/dhelectronics/dh_imx8mp/Makefile b/board/dhelectronics/dh_imx8mp/Makefile new file mode 100644 index 00000000000..86ffc31fed8 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (C) 2022 Marek Vasut <marex(a)denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o lpddr4_timing_4G_32.o +else +obj-y += imx8mp_dhcom_pdk2.o +endif + +obj-y += common.o diff --git a/board/dhelectronics/dh_imx8mp/common.c b/board/dhelectronics/dh_imx8mp/common.c new file mode 100644 index 00000000000..44456da681c --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/common.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + */ + +#include <common.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> + +#include "lpddr4_timing.h" + +DECLARE_GLOBAL_DATA_PTR; + +u8 dh_get_memcfg(void) +{ + struct gpio_desc gpio[4]; + u8 memcfg = 0; + ofnode node; + int i, ret; + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + printf("%s: no /config node?\n", __func__); + return BIT(2) | BIT(0); + } + + ret = gpio_request_list_by_name_nodev(node, + "dh,ram-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i; + + gpio_free_list_nodev(gpio, ret); + + return memcfg; +} diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c new file mode 100644 index 00000000000..8676c44d0d1 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <dm.h> +#include <env.h> +#include <env_internal.h> +#include <i2c_eeprom.h> +#include <malloc.h> +#include <net.h> +#include <miiphy.h> + +#include "lpddr4_timing.h" + +DECLARE_GLOBAL_DATA_PTR; + +int mach_cpu_init(void) +{ + icache_enable(); + return 0; +} + +int board_phys_sdram_size(phys_size_t *size) +{ + const u16 memsz[] = { 512, 1024, 1536, 2048, 3072, 4096, 6144, 8192 }; + u8 memcfg = dh_get_memcfg(); + + *size = (u64)memsz[memcfg] << 20ULL; + + return 0; +} + +/* IMX8M SNVS registers needed for the bootcount functionality */ +#define SNVS_BASE_ADDR 0x30370000 +#define SNVS_LPSR 0x4c +#define SNVS_LPLVDR 0x64 +#define SNVS_LPPGDR_INIT 0x41736166 + +static void setup_snvs(void) +{ + /* Enable SNVS clock */ + clock_enable(CCGR_SNVS, 1); + /* Initialize glitch detect */ + writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); + /* Clear interrupt status */ + writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); +} + +static void setup_eqos(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Set INTF as RGMII, enable RGMII TXC clock. */ + clrsetbits_le32(&gpr->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); + setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); + + set_clk_eqos(ENET_125MHZ); +} + +static void setup_fec(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Enable RGMII TX clk output. */ + setbits_le32(&gpr->gpr[1], BIT(22)); + + set_clk_enet(ENET_125MHZ); +} + +static int setup_mac_address_from_eeprom(char *alias, char *env, bool odd) +{ + unsigned char enetaddr[6]; + struct udevice *dev; + int ret, offset; + + offset = fdt_path_offset(gd->fdt_blob, alias); + if (offset < 0) { + printf("%s: No eeprom0 path offset\n", __func__); + return offset; + } + + ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, offset, &dev); + if (ret) { + printf("Cannot find EEPROM!\n"); + return ret; + } + + ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6); + if (ret) { + printf("Error reading configuration EEPROM!\n"); + return ret; + } + + /* + * Populate second ethernet MAC from first ethernet EEPROM with MAC + * address LSByte incremented by 1. This is only used on SoMs without + * second ethernet EEPROM, i.e. early prototypes. + */ + if (odd) + enetaddr[5]++; + + eth_env_set_enetaddr(env, enetaddr); + + return 0; +} + +static void setup_mac_address(void) +{ + unsigned char enetaddr[6]; + bool skip_eth0 = false; + bool skip_eth1 = false; + int ret; + + ret = eth_env_get_enetaddr("ethaddr", enetaddr); + if (ret) /* ethaddr is already set */ + skip_eth0 = true; + + ret = eth_env_get_enetaddr("eth1addr", enetaddr); + if (ret) /* eth1addr is already set */ + skip_eth1 = true; + + /* Both MAC addresses are already set in U-Boot environment. */ + if (skip_eth0 && skip_eth1) + return; + + /* + * If IIM fuses contain valid MAC address, use it. + * The IIM MAC address fuses are NOT programmed by default. + */ + imx_get_mac_from_fuse(0, enetaddr); + if (is_valid_ethaddr(enetaddr)) { + if (!skip_eth0) + eth_env_set_enetaddr("ethaddr", enetaddr); + /* + * The LSbit of MAC address in fuses is always 0, use the + * next consecutive MAC address for the second ethernet. + */ + enetaddr[5]++; + if (!skip_eth1) + eth_env_set_enetaddr("eth1addr", enetaddr); + return; + } + + /* Use on-SoM EEPROMs with pre-programmed MAC address. */ + if (!skip_eth0) { + /* We cannot do much more if this returns -ve . */ + setup_mac_address_from_eeprom("eeprom0", "ethaddr", false); + } + + if (!skip_eth1) { + ret = setup_mac_address_from_eeprom("eeprom1", "eth1addr", + false); + if (ret) { /* Second EEPROM might not be populated. */ + /* We cannot do much more if this returns -ve . */ + setup_mac_address_from_eeprom("eeprom0", "eth1addr", + true); + } + } +} + +int board_init(void) +{ + setup_eqos(); + setup_fec(); + setup_snvs(); + return 0; +} + +int board_late_init(void) +{ + setup_mac_address(); + return 0; +} + +enum env_location env_get_location(enum env_operation op, int prio) +{ + return prio ? ENVL_UNKNOWN : ENVL_SPI_FLASH; +} diff --git a/board/dhelectronics/dh_imx8mp/imximage-lpddr4.cfg b/board/dhelectronics/dh_imx8mp/imximage-lpddr4.cfg new file mode 100644 index 00000000000..8aadedb1028 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/imximage-lpddr4.cfg @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2021 NXP + */ + +ROM_VERSION v2 +BOOT_FROM sd +LOADER u-boot-spl-ddr.bin 0x920000 diff --git a/board/dhelectronics/dh_imx8mp/lpddr4_timing.h b/board/dhelectronics/dh_imx8mp/lpddr4_timing.h new file mode 100644 index 00000000000..6d496a970be --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/lpddr4_timing.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + */ + +#ifndef __LPDDR4_TIMING_H__ +#define __LPDDR4_TIMING_H__ + +extern struct dram_timing_info dh_imx8mp_dhcom_dram_timing_32g_x32; + +u8 dh_get_memcfg(void); + +#endif /* __LPDDR4_TIMING_H__ */ diff --git a/board/dhelectronics/dh_imx8mp/lpddr4_timing_4G_32.c b/board/dhelectronics/dh_imx8mp/lpddr4_timing_4G_32.c new file mode 100644 index 00000000000..2eda4a59569 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/lpddr4_timing_4G_32.c @@ -0,0 +1,1844 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + * + * Generated code from MX8M_DDR_tool + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +static struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + { 0x3d400304, 0x1 }, + { 0x3d400030, 0x1 }, + { 0x3d400000, 0xa3080020 }, + { 0x3d400020, 0x1323 }, + { 0x3d400024, 0x1c79100 }, + { 0x3d400064, 0x710106 }, + { 0x3d400070, 0x7027f90 }, + { 0x3d400074, 0x790 }, + { 0x3d4000d0, 0xc0030720 }, + { 0x3d4000d4, 0xb80000 }, + { 0x3d4000dc, 0xe40036 }, + { 0x3d4000e0, 0x330000 }, + { 0x3d4000e8, 0x660048 }, + { 0x3d4000ec, 0x160048 }, + { 0x3d400100, 0x1e262028 }, + { 0x3d400104, 0x7073b }, + { 0x3d40010c, 0xe0e000 }, + { 0x3d400110, 0x11040a11 }, + { 0x3d400114, 0x2050e0e }, + { 0x3d400118, 0x1010008 }, + { 0x3d40011c, 0x501 }, + { 0x3d400130, 0x20700 }, + { 0x3d400134, 0xe100002 }, + { 0x3d400138, 0x10d }, + { 0x3d400144, 0xbb005e }, + { 0x3d400180, 0x3a5001c }, + { 0x3d400184, 0x2f071e5 }, + { 0x3d400188, 0x0 }, + { 0x3d400190, 0x49b820c }, + { 0x3d400194, 0x80303 }, + { 0x3d4001b4, 0x1b0c }, + { 0x3d4001a0, 0xe0400018 }, + { 0x3d4001a4, 0xdf00e4 }, + { 0x3d4001a8, 0x80000000 }, + { 0x3d4001b0, 0x11 }, + { 0x3d4001c0, 0x1 }, + { 0x3d4001c4, 0x1 }, + { 0x3d4000f4, 0xc99 }, + { 0x3d400108, 0x810191a }, + { 0x3d400200, 0x17 }, + { 0x3d40020c, 0x0 }, + { 0x3d400210, 0x1f1f }, + { 0x3d400204, 0x80808 }, + { 0x3d400214, 0x7070707 }, + { 0x3d400218, 0x7070707 }, + { 0x3d40021c, 0xf0f }, + { 0x3d400250, 0x1705 }, + { 0x3d400254, 0x2c }, + { 0x3d40025c, 0x4000030 }, + { 0x3d400264, 0x900093e7 }, + { 0x3d40026c, 0x2005574 }, + { 0x3d400400, 0x111 }, + { 0x3d400404, 0x72ff }, + { 0x3d400408, 0x72ff }, + { 0x3d400494, 0x2100e07 }, + { 0x3d400498, 0x620096 }, + { 0x3d40049c, 0x1100e07 }, + { 0x3d4004a0, 0xc8012c }, + { 0x3d402020, 0x1021 }, + { 0x3d402024, 0x30d400 }, + { 0x3d402050, 0x20d000 }, + { 0x3d402064, 0xc001c }, + { 0x3d4020dc, 0x840000 }, + { 0x3d4020e0, 0x330000 }, + { 0x3d4020e8, 0x660048 }, + { 0x3d4020ec, 0x160048 }, + { 0x3d402100, 0xa040305 }, + { 0x3d402104, 0x30407 }, + { 0x3d402108, 0x203060b }, + { 0x3d40210c, 0x505000 }, + { 0x3d402110, 0x2040202 }, + { 0x3d402114, 0x2030202 }, + { 0x3d402118, 0x1010004 }, + { 0x3d40211c, 0x301 }, + { 0x3d402130, 0x20300 }, + { 0x3d402134, 0xa100002 }, + { 0x3d402138, 0x1d }, + { 0x3d402144, 0x14000a }, + { 0x3d402180, 0x640004 }, + { 0x3d402190, 0x3818200 }, + { 0x3d402194, 0x80303 }, + { 0x3d4021b4, 0x100 }, + { 0x3d4020f4, 0xc99 }, + { 0x3d403020, 0x1021 }, + { 0x3d403024, 0xc3500 }, + { 0x3d403050, 0x20d000 }, + { 0x3d403064, 0x30007 }, + { 0x3d4030dc, 0x840000 }, + { 0x3d4030e0, 0x330000 }, + { 0x3d4030e8, 0x660048 }, + { 0x3d4030ec, 0x160048 }, + { 0x3d403100, 0xa010102 }, + { 0x3d403104, 0x30404 }, + { 0x3d403108, 0x203060b }, + { 0x3d40310c, 0x505000 }, + { 0x3d403110, 0x2040202 }, + { 0x3d403114, 0x2030202 }, + { 0x3d403118, 0x1010004 }, + { 0x3d40311c, 0x301 }, + { 0x3d403130, 0x20300 }, + { 0x3d403134, 0xa100002 }, + { 0x3d403138, 0x8 }, + { 0x3d403144, 0x50003 }, + { 0x3d403180, 0x190004 }, + { 0x3d403190, 0x3818200 }, + { 0x3d403194, 0x80303 }, + { 0x3d4031b4, 0x100 }, + { 0x3d4030f4, 0xc99 }, + { 0x3d400028, 0x0 }, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param ddr_ddrphy_cfg[] = { + { 0x100a0, 0x0 }, + { 0x100a1, 0x1 }, + { 0x100a2, 0x2 }, + { 0x100a3, 0x3 }, + { 0x100a4, 0x4 }, + { 0x100a5, 0x5 }, + { 0x100a6, 0x6 }, + { 0x100a7, 0x7 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x1 }, + { 0x110a2, 0x3 }, + { 0x110a3, 0x4 }, + { 0x110a4, 0x5 }, + { 0x110a5, 0x2 }, + { 0x110a6, 0x7 }, + { 0x110a7, 0x6 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x1 }, + { 0x120a2, 0x3 }, + { 0x120a3, 0x2 }, + { 0x120a4, 0x5 }, + { 0x120a5, 0x4 }, + { 0x120a6, 0x7 }, + { 0x120a7, 0x6 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x1 }, + { 0x130a2, 0x2 }, + { 0x130a3, 0x3 }, + { 0x130a4, 0x4 }, + { 0x130a5, 0x5 }, + { 0x130a6, 0x6 }, + { 0x130a7, 0x7 }, + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x20024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x120024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x220024, 0x1e3 }, + { 0x2003a, 0x2 }, + { 0x20056, 0x3 }, + { 0x120056, 0x3 }, + { 0x220056, 0x3 }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + { 0x10049, 0xeba }, + { 0x10149, 0xeba }, + { 0x11049, 0xeba }, + { 0x11149, 0xeba }, + { 0x12049, 0xeba }, + { 0x12149, 0xeba }, + { 0x13049, 0xeba }, + { 0x13149, 0xeba }, + { 0x110049, 0xeba }, + { 0x110149, 0xeba }, + { 0x111049, 0xeba }, + { 0x111149, 0xeba }, + { 0x112049, 0xeba }, + { 0x112149, 0xeba }, + { 0x113049, 0xeba }, + { 0x113149, 0xeba }, + { 0x210049, 0xeba }, + { 0x210149, 0xeba }, + { 0x211049, 0xeba }, + { 0x211149, 0xeba }, + { 0x212049, 0xeba }, + { 0x212149, 0xeba }, + { 0x213049, 0xeba }, + { 0x213149, 0xeba }, + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x3a5 }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + { 0x2007d, 0x212 }, + { 0x12007d, 0x212 }, + { 0x22007d, 0x212 }, + { 0x2007c, 0x61 }, + { 0x12007c, 0x61 }, + { 0x22007c, 0x61 }, + { 0x1004a, 0x500 }, + { 0x1104a, 0x500 }, + { 0x1204a, 0x500 }, + { 0x1304a, 0x500 }, + { 0x2002c, 0x0 }, +}; + +/* ddr phy trained csr */ +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xe94 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x131f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x310 }, + { 0x54019, 0x36e4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x36e4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x54032, 0xe400 }, + { 0x54033, 0x3336 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xe400 }, + { 0x54039, 0x3336 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x310 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54012, 0x310 }, + { 0x54019, 0x84 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x84 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x54032, 0x8400 }, + { 0x54033, 0x3300 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0x8400 }, + { 0x54039, 0x3300 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54003, 0xe94 }, + { 0x54004, 0x2 }, + { 0x54005, 0x2228 }, + { 0x54006, 0x14 }, + { 0x54008, 0x61 }, + { 0x54009, 0xc8 }, + { 0x5400b, 0x2 }, + { 0x5400f, 0x100 }, + { 0x54010, 0x1f7f }, + { 0x54012, 0x310 }, + { 0x54019, 0x36e4 }, + { 0x5401a, 0x33 }, + { 0x5401b, 0x4866 }, + { 0x5401c, 0x4800 }, + { 0x5401e, 0x16 }, + { 0x5401f, 0x36e4 }, + { 0x54020, 0x33 }, + { 0x54021, 0x4866 }, + { 0x54022, 0x4800 }, + { 0x54024, 0x16 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x54032, 0xe400 }, + { 0x54033, 0x3336 }, + { 0x54034, 0x6600 }, + { 0x54035, 0x48 }, + { 0x54036, 0x48 }, + { 0x54037, 0x1600 }, + { 0x54038, 0xe400 }, + { 0x54039, 0x3336 }, + { 0x5403a, 0x6600 }, + { 0x5403b, 0x48 }, + { 0x5403c, 0x48 }, + { 0x5403d, 0x1600 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param ddr_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xb }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x633 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x633 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x633 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x633 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x633 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x633 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x633 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x633 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x633 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x633 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x633 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x633 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x633 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xb }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x1 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x625 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x625 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a4, 0x0 }, + { 0x900a5, 0x790 }, + { 0x900a6, 0x11a }, + { 0x900a7, 0x8 }, + { 0x900a8, 0x7aa }, + { 0x900a9, 0x2a }, + { 0x900aa, 0x10 }, + { 0x900ab, 0x7b2 }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x0 }, + { 0x900ae, 0x7c8 }, + { 0x900af, 0x109 }, + { 0x900b0, 0x10 }, + { 0x900b1, 0x10 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x1 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xd }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x8 }, + { 0x90159, 0xe8 }, + { 0x9015a, 0x109 }, + { 0x9015b, 0x0 }, + { 0x9015c, 0x8140 }, + { 0x9015d, 0x10c }, + { 0x9015e, 0x10 }, + { 0x9015f, 0x8138 }, + { 0x90160, 0x104 }, + { 0x90161, 0x8 }, + { 0x90162, 0x448 }, + { 0x90163, 0x109 }, + { 0x90164, 0xf }, + { 0x90165, 0x7c0 }, + { 0x90166, 0x109 }, + { 0x90167, 0x0 }, + { 0x90168, 0xe8 }, + { 0x90169, 0x109 }, + { 0x9016a, 0x47 }, + { 0x9016b, 0x630 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0x8 }, + { 0x9016e, 0x618 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x8 }, + { 0x90171, 0xe0 }, + { 0x90172, 0x109 }, + { 0x90173, 0x0 }, + { 0x90174, 0x7c8 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0x8140 }, + { 0x90178, 0x10c }, + { 0x90179, 0x0 }, + { 0x9017a, 0x478 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x0 }, + { 0x9017d, 0x1 }, + { 0x9017e, 0x8 }, + { 0x9017f, 0x8 }, + { 0x90180, 0x4 }, + { 0x90181, 0x0 }, + { 0x90006, 0x8 }, + { 0x90007, 0x7c8 }, + { 0x90008, 0x109 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x400 }, + { 0x9000b, 0x106 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x29 }, + { 0x90026, 0x68 }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x200be, 0x3 }, + { 0x2000b, 0x419 }, + { 0x2000c, 0xe9 }, + { 0x2000d, 0x91c }, + { 0x2000e, 0x2c }, + { 0x12000b, 0x70 }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x1c }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x2060 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x20089, 0x1 }, + { 0x20088, 0x19 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 } +}; + +static struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 3732mts 1D */ + .drate = 3732, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 3732mts 2D */ + .drate = 3732, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dh_imx8mp_dhcom_dram_timing_32g_x32 = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 3732, 400, 100, }, +}; diff --git a/board/dhelectronics/dh_imx8mp/spl.c b/board/dhelectronics/dh_imx8mp/spl.c new file mode 100644 index 00000000000..312e4b96984 --- /dev/null +++ b/board/dhelectronics/dh_imx8mp/spl.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + */ + +#include <common.h> +#include <hang.h> +#include <image.h> +#include <init.h> +#include <spl.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx8mp_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/arch/ddr.h> + +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> + +#include <power/pmic.h> +#include <power/pca9450.h> + +#include "lpddr4_timing.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) + +static const iomux_v3_cfg_t uart_pads[] = { + MX8MP_PAD_SAI2_RXFS__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX8MP_PAD_SAI2_RXC__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static const iomux_v3_cfg_t wdog_pads[] = { + MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +static void dh_imx8mp_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); +} + +static int dh_imx8mp_board_power_init(void) +{ + struct udevice *dev; + int ret; + + ret = pmic_get("pmic@25", &dev); + if (ret == -ENODEV) { + puts("Failed to get PMIC\n"); + return 0; + } + if (ret != 0) + return ret; + + /* BUCKxOUT_DVS0/1 control BUCK123 output. */ + pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29); + + /* Increase VDD_SOC to typical value 0.95V before first DRAM access. */ + if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV)) + /* Set DVS0 to 0.85V for special case. */ + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14); + else + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c); + + /* Set DVS1 to 0.85v for suspend. */ + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14); + + /* + * Enable DVS control through PMIC_STBY_REQ and + * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H). + */ + pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59); + + /* Kernel uses OD/OD frequency for SoC. */ + + /* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95V */ + pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c); + + /* Set WDOG_B_CFG to cold reset. */ + pmic_reg_write(dev, PCA9450_RESET_CTRL, 0xA1); + + /* Set LDO4 and CONFIG2 to enable the I2C level translator. */ + pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59); + pmic_reg_write(dev, PCA9450_CONFIG2, 0x1); + + return 0; +} + +static struct dram_timing_info *dram_timing_info[8] = { + NULL, /* 512 MiB */ + NULL, /* 1024 MiB */ + NULL, /* 1536 MiB */ + NULL, /* 2048 MiB */ + NULL, /* 3072 MiB */ + &dh_imx8mp_dhcom_dram_timing_32g_x32, /* 4096 MiB */ + NULL, /* 6144 MiB */ + NULL, /* 8192 MiB */ +}; + +static void spl_dram_init(void) +{ + const u16 size[] = { 512, 1024, 1536, 2048, 3072, 4096, 6144, 8192 }; + u8 memcfg = dh_get_memcfg(); + int i; + + printf("DDR: %d MiB [0x%x]\n", size[memcfg], memcfg); + + if (!dram_timing_info[memcfg]) { + printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n", + memcfg); + for (i = 0; i < ARRAY_SIZE(dram_timing_info); i++) + if (dram_timing_info[i]) /* Configuration found */ + break; + } + + ddr_init(dram_timing_info[memcfg]); +} + +void spl_board_init(void) +{ + /* + * Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not + * allow to change it. Should set the clock after PMIC setting done. + * Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for + * ND VDD_SOC. + */ + clock_enable(CCGR_GIC, 0); + clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5)); + clock_enable(CCGR_GIC, 1); +} + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + return BOOT_DEVICE_BOOTROM; +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + + arch_cpu_init(); + + init_uart_clk(0); + + dh_imx8mp_early_init_f(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", + &dev); + if (ret < 0) { + printf("Failed to find clock node. Check device tree\n"); + hang(); + } + + enable_tzc380(); + + dh_imx8mp_board_power_init(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig new file mode 100644 index 00000000000..c1b55d72b60 --- /dev/null +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -0,0 +1,246 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_SYS_MALLOC_F_LEN=0x18000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0xFE0000 +CONFIG_ENV_SECT_SIZE=0x1000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk2" +CONFIG_SPL_TEXT_BASE=0x920000 +CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 +CONFIG_SPL=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y +CONFIG_DEBUG_UART_BASE=0x30860000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_ENV_OFFSET_REDUND=0xFF0000 +CONFIG_IMX_BOOTAUX=y +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 +CONFIG_SYS_LOAD_ADDR=0x50000000 +CONFIG_DEBUG_UART=y +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTARGS=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset" +CONFIG_USE_PREBOOT=y +CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk2.dtb" +CONFIG_CONSOLE_MUX=y +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y +CONFIG_ARCH_MISC_INIT=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y +CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="u-boot=> " +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_EXPORTENV is not set +CONFIG_CMD_ERASEENV=y +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 +CONFIG_SYS_EEPROM_SIZE=16384 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_SHA1SUM=y +CONFIG_SHA1SUM_VERIFY=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_I2C=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MBR=y +CONFIG_CMD_MMC=y +CONFIG_CMD_BKOPS_ENABLE=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_BOOTCOUNT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_GETTIME=y +CONFIG_CMD_SYSBOOT=y +CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_HASH=y +CONFIG_CMD_SMC=y +CONFIG_HASH_VERIFY=y +CONFIG_CMD_BTRFS=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y +CONFIG_MTDIDS_DEFAULT="nor0=flash@0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)" +CONFIG_MMC_SPEED_MODE_SET=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SECT_SIZE_AUTO=y +CONFIG_ENV_SPI_MAX_HZ=80000000 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_VERSION_VARIABLE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_IP_DEFRAG=y +CONFIG_TFTP_TSIZE=y +CONFIG_SPL_DM=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_IMX8MP=y +CONFIG_CLK_IMX8MP=y +CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_DFU_TFTP=y +CONFIG_DFU_TIMEOUT=y +CONFIG_DFU_MMC=y +CONFIG_DFU_MTD=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x42800000 +CONFIG_FASTBOOT_BUF_SIZE=0x20000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_GPIO_HOG=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +# CONFIG_INPUT is not set +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_USDHC=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +# CONFIG_SPI_FLASH_UNLOCK_ALL is not set +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_ATHEROS=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_DM_ETH_PHY=y +CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_IMX=y +CONFIG_FEC_MXC=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PCA9450=y +CONFIG_SPL_DM_PMIC_PCA9450=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PCA9450=y +CONFIG_SPL_DM_REGULATOR_PCA9450=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RESET=y +CONFIG_DM_RTC=y +CONFIG_RTC_M41T62=y +CONFIG_CONS_INDEX=2 +CONFIG_DM_SERIAL=y +# CONFIG_SPL_DM_SERIAL is not set +CONFIG_MXC_UART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y +CONFIG_MXC_SPI=y +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_PSCI=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y +CONFIG_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="DH electronics" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_SDP_LOADADDR=0x0 +CONFIG_USB_FUNCTION_ACM=y +CONFIG_IMX_WATCHDOG=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h new file mode 100644 index 00000000000..a33fed422e2 --- /dev/null +++ b/include/configs/imx8mp_dhcom_pdk2.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022 Marek Vasut <marex(a)denx.de> + */ + +#ifndef __IMX8MP_DHCOM_PDK2_H +#define __IMX8MP_DHCOM_PDK2_H + +#include <linux/sizes.h> +#include <linux/stringify.h> +#include <asm/arch/imx-regs.h> + +#define CONFIG_SYS_BOOTM_LEN SZ_128M + +#define CONFIG_SPL_MAX_SIZE (148 * 1024) +#define CONFIG_SYS_MONITOR_LEN SZ_1M + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_STACK 0x96FC00 +#define CONFIG_SPL_BSS_START_ADDR 0x0096FC00 +#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KiB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x4c000000 +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 kiB */ + +/* For RAW image gives a error info not panic */ +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#endif + +/* Link Definitions */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0x20000000 /* Minimum 512 MiB DDR */ + +#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* PHY needs a longer autonegotiation timeout after reset */ +#define PHY_ANEG_TIMEOUT 20000 +#define FEC_QUIRK_ENET_MAC + +/* USDHC */ +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_SYS_I2C_SPEED 100000 + +#if !defined(CONFIG_SPL_BUILD) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "altbootcmd=run bootcmd ; reset\0" \ + "bootlimit=3\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramdisk_addr_r=0x58000000\0" \ + "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + /* Give slow devices beyond USB HUB chance to come up. */ \ + "usb_pgood_delay=2000\0" \ + "dfu_alt_info=" \ + /* RAM block at DRAM offset 256..768 MiB */ \ + "ram ram0=ram ram 0x50000000 0x20000000&" \ + /* 16 MiB SPI NOR */ \ + "mtd nor0=sf raw 0x0 0x1000000\0" \ + "dh_update_env=" \ + "setenv dh_update_env true ; saveenv ; saveenv\0" \ + "dh_update_sf_gen_fcfb=" \ + "setexpr sfaddr ${loadaddr} - 0x1000 ; " \ + "base ${sfaddr} ; " \ + "mw 0 0 0x400 ; " \ + "mw 0x400 0x42464346 ; " \ + "mw 0x404 0x56010000 ; " \ + "mw 0x40c 00030300 ; " \ + "mw 0x444 0x00020101 ; " \ + "mw 0x450 0x10000000 ; " \ + "mw 0x480 0x0818040b ; " \ + "mw 0x484 0x24043008 ; " \ + "mw 0x5c0 0x100 ; " \ + "mw 0x5c4 0x10000 ; " \ + "base 0\0" \ + "dh_update_sf_write_data=" \ + "setexpr sfaddr ${loadaddr} - 0x1000 ; " \ + "setexpr filesize ${filesize} + 0x1000 ; " \ + "sf probe && sf update ${sfaddr} 0 ${filesize}\0" \ + "dh_update_sd_to_sf=" \ + "load mmc 0:1 ${loadaddr} boot/flash.bin && " \ + "run dh_update_sf_gen_fcfb dh_update_sf_write_data\0" \ + "dh_update_emmc_to_sf=" \ + "load mmc 1:1 ${loadaddr} boot/flash.bin && " \ + "run dh_update_sf_gen_fcfb dh_update_sf_write_data\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#endif + +#endif -- 2.35.1

1 0

[U-Boot] [PATCH 1/2] rockchip: rk3399: fix force power on reset
by Vasily Khoruzhick 19 May '22

19 May '22

Currently code doesn't even compile since it uses wrong define for ifdef. Fix that and also add missing include Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init") Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- arch/arm/mach-rockchip/rk3399/rk3399.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 863024d071..eeb99dd11b 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -11,6 +11,7 @@ #include <asm/io.h> #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/cru_rk3399.h> #include <asm/arch-rockchip/gpio.h> #include <asm/arch-rockchip/grf_rk3399.h> #include <asm/arch-rockchip/hardware.h> @@ -213,7 +214,7 @@ void spl_perform_fixups(struct spl_image_info *spl_image) "u-boot,spl-boot-device", boot_ofpath); } -#if defined(SPL_GPIO_SUPPORT) +#if defined(CONFIG_SPL_GPIO_SUPPORT) static void rk3399_force_power_on_reset(void) { ofnode node; @@ -239,7 +240,7 @@ static void rk3399_force_power_on_reset(void) void spl_board_init(void) { -#if defined(SPL_GPIO_SUPPORT) +#if defined(CONFIG_SPL_GPIO_SUPPORT) struct rk3399_cru *cru = rockchip_get_cru(); /* -- 2.24.0

5 23

[PATCH] cmd/bootefi: correct command syntax
by Heinrich Schuchardt 19 May '22

19 May '22

For indicating the address and size of a memory region other commands use a <addr>[:<size>] syntax. Do the same for bootefi. Fixes: 2058983689f0 ("cmd: bootefi: restore ability to boot arbitrary blob") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt(a)canonical.com> --- cmd/bootefi.c | 21 +++++++++++++++------ doc/usage/cmd/bootefi.rst | 8 ++++---- 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/cmd/bootefi.c b/cmd/bootefi.c index d80353fa71..827fcd97df 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -649,6 +649,7 @@ static int do_bootefi(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { efi_status_t ret; + char *img_addr, *img_size, *str_copy, *pos; void *fdt; if (argc < 2) @@ -662,7 +663,7 @@ static int do_bootefi(struct cmd_tbl *cmdtp, int flag, int argc, return CMD_RET_FAILURE; } - if (argc > 2 && strcmp(argv[2], "-")) { + if (argc > 2) { uintptr_t fdt_addr; fdt_addr = hextoul(argv[2], NULL); @@ -684,16 +685,24 @@ static int do_bootefi(struct cmd_tbl *cmdtp, int flag, int argc, if (!strcmp(argv[1], "selftest")) return do_efi_selftest(); #endif + str_copy = strdup(argv[1]); + if (!str_copy) { + log_err("Out of memory\n"); + return CMD_RET_FAILURE; + } + pos = str_copy; + img_addr = strsep(&pos, ":"); + img_size = strsep(&pos, ":"); + ret = do_bootefi_image(img_addr, img_size); + free(str_copy); - return do_bootefi_image(argv[1], argc > 3 ? argv[3] : NULL); + return ret; } #ifdef CONFIG_SYS_LONGHELP static char bootefi_help_text[] = - "<image address> [fdt address [image size]]\n" - " - boot EFI payload stored at <image address>\n" - " fdt address, address of device-tree or '-'\n" - " image size, required if image not preloaded\n" + "<image address>[:<image size>] [<fdt address>]\n" + " - boot EFI payload\n" #ifdef CONFIG_CMD_BOOTEFI_HELLO "bootefi hello\n" " - boot a sample Hello World application stored within U-Boot\n" diff --git a/doc/usage/cmd/bootefi.rst b/doc/usage/cmd/bootefi.rst index 4cc8c0718c..cb03df4e1c 100644 --- a/doc/usage/cmd/bootefi.rst +++ b/doc/usage/cmd/bootefi.rst @@ -9,10 +9,10 @@ Synopsis :: - bootefi [image_addr] [fdt_addr [image_size]] - bootefi bootmgr [fdt_addr] - bootefi hello [fdt_addr] - bootefi selftest [fdt_addr] + bootefi <image_addr>[:<image_size>] [<fdt_addr>] + bootefi bootmgr [<fdt_addr>] + bootefi hello [<fdt_addr>] + bootefi selftest [<fdt_addr>] Description ----------- -- 2.34.1

1 0

[PATCH 0/4] stm32mp: add minimal RCC support for STM32MP13
by Patrick Delaunay 19 May '22

19 May '22

Add a minimal support for STM32MP13 RCC, the reset and clock controller - update of the RCC MISC driver to bind the correct clock and reset driver - reset driver, same than STM32MP15x = drivers/reset/stm32-reset.c - clock driver, add a empty driver for STM32MP13x = drivers/clk/stm32/clk-stm32mp13.c - Add RCC node in SOC device tree with u-boot,dm-pre-reloc property This serie is only a preliminary step for STM32MP13 clock and reset support in U-Boot, based on Linux kernel binding introduced by [1] and it prepares the next device tree alignment with Linux kernel. The functional STMP13 clock driver based on CCF and on SCMI clocks provided by OP-TEE and the clock and reset references in SOC device tree will be pushed when the associated patches in [1] will be accepted. [1] Introduction of STM32MP13 RCC driver (Reset Clock Controller) https://lore.kernel.org/linux-arm-kernel/20220316131000.9874-1-gabriel.fern… Patrick Delaunay (4): clk: Add directory for STM32 clock drivers clk: stm32mp13: add a STM32MP13 RCC clock driver misc: stm32mp13: introduce STM32MP13 RCC driver ARM: dts: stm32: add rcc node for STM32MP13 MAINTAINERS | 2 +- arch/arm/dts/stm32mp13-u-boot.dtsi | 4 ++++ arch/arm/dts/stm32mp131.dtsi | 7 ++++++ drivers/clk/Kconfig | 17 +------------- drivers/clk/Makefile | 5 ++--- drivers/clk/stm32/Kconfig | 31 ++++++++++++++++++++++++++ drivers/clk/stm32/Makefile | 8 +++++++ drivers/clk/stm32/clk-stm32mp13.c | 21 +++++++++++++++++ drivers/clk/{ => stm32}/clk_stm32f.c | 0 drivers/clk/{ => stm32}/clk_stm32h7.c | 0 drivers/clk/{ => stm32}/clk_stm32mp1.c | 0 drivers/misc/stm32_rcc.c | 6 +++++ 12 files changed, 81 insertions(+), 20 deletions(-) create mode 100644 drivers/clk/stm32/Kconfig create mode 100644 drivers/clk/stm32/Makefile create mode 100644 drivers/clk/stm32/clk-stm32mp13.c rename drivers/clk/{ => stm32}/clk_stm32f.c (100%) rename drivers/clk/{ => stm32}/clk_stm32h7.c (100%) rename drivers/clk/{ => stm32}/clk_stm32mp1.c (100%) -- 2.25.1

4 9

[PATCH v5 00/25] Add support for MediaTek MT7621 SoC - v5
by Weijie Gao 19 May '22

19 May '22

This series will add support for MediaTek MT7621 SoC with two reference boards and related drivers. The MediaTek MT7621 is a network processor integrating a dual-core dual-threaded MIPS 1004Kc processor running at a normal frequency of 880MHz. This chip can be found in many wireless routers. This series add all basic drivers which are useful in u-boot, like usb, sdxc, ethernet, spi, nand and serial. Currently this patch series only supports building the ram-bootable image as it needs the preloader from MediaTek SDK. Thanks, Weijie v5 changes: - Adjust mt7621.dtsi, clkctrl node moved to sysc, pinctrl default states moved to board dts files - Modify clk driver due to its node changed in mt7621.dtsi - Minor fixes v4 changes: - Add full support for booting from flash v3 changes: - Rewrite clk driver to follow definitions from upstream kernel - Implement noncached_alloc() for MIPS platform - Update register remap for mtk-eth driver needed by mt7621 v2 changes: - Add a kconfig for max supported ram size - Remove network configs from default config file - Add config file for mt7621-rfb boards Weijie Gao (25): mips: add asm/mipsmtregs.h for MIPS multi-threading mips: add more definitions for asm/cm.h mips: add __image_copy_len for SPL linker script mips: add support for noncached_alloc() mips: mtmips: add support for MediaTek MT7621 SoC mips: mtmips: add two reference boards for mt7621 doc: mediatek: add documentation for mt7621 reference boards clk: mtmips: add clock driver for MediaTek MT7621 SoC reset: mtmips: add reset controller support for MediaTek MT7621 SoC pinctrl: mtmips: add support for MediaTek MT7621 SoC usb: xhci-mtk: add support for MediaTek MT7621 SoC phy: mtk-tphy: add support for MediaTek MT7621 SoC spi: add support for MediaTek MT7621 SoC gpio: add support for MediaTek MT7621 SoC watchdog: add support for MediaTek MT7621 SoC mmc: mediatek: add support for MediaTek MT7621 SoC net: mediatek: remap iobase address net: mediatek: use regmap api to modify ethsys registers net: mediatek: add support for MediaTek MT7621 SoC nand: raw: add support for MediaTek MT7621 SoC spl: allow using nand base without standard nand driver spl: spl_legacy: fix the use of SPL_COPY_PAYLOAD_ONLY spl: nand: support loading legacy image with payload compressed tools: mtk_image: add support for MT7621 NAND images MAINTAINERS: update maintainer for MediaTek MIPS platform MAINTAINERS | 8 + arch/mips/cpu/u-boot-spl.lds | 3 + arch/mips/dts/Makefile | 2 + arch/mips/dts/mediatek,mt7621-nand-rfb.dts | 67 + arch/mips/dts/mediatek,mt7621-rfb.dts | 82 ++ arch/mips/dts/mt7621-u-boot.dtsi | 111 ++ arch/mips/dts/mt7621.dtsi | 349 +++++ arch/mips/include/asm/cm.h | 67 + arch/mips/include/asm/mipsmtregs.h | 142 ++ arch/mips/include/asm/system.h | 20 + arch/mips/lib/cache.c | 43 + arch/mips/mach-mtmips/Kconfig | 49 +- arch/mips/mach-mtmips/Makefile | 4 + arch/mips/mach-mtmips/cpu.c | 2 +- arch/mips/mach-mtmips/mt7621/Kconfig | 115 ++ arch/mips/mach-mtmips/mt7621/Makefile | 14 + arch/mips/mach-mtmips/mt7621/init.c | 229 +++ arch/mips/mach-mtmips/mt7621/mt7621.h | 229 +++ arch/mips/mach-mtmips/mt7621/serial.c | 23 + arch/mips/mach-mtmips/mt7621/spl/Makefile | 9 + arch/mips/mach-mtmips/mt7621/spl/cps.c | 152 ++ arch/mips/mach-mtmips/mt7621/spl/dram.c | 155 +++ arch/mips/mach-mtmips/mt7621/spl/dram.h | 39 + arch/mips/mach-mtmips/mt7621/spl/launch.c | 100 ++ arch/mips/mach-mtmips/mt7621/spl/launch.h | 52 + arch/mips/mach-mtmips/mt7621/spl/launch_ll.S | 357 +++++ arch/mips/mach-mtmips/mt7621/spl/serial.c | 24 + arch/mips/mach-mtmips/mt7621/spl/spl.c | 95 ++ arch/mips/mach-mtmips/mt7621/spl/start.S | 226 +++ arch/mips/mach-mtmips/mt7621/sram_init.S | 22 + arch/mips/mach-mtmips/mt7621/tpl/Makefile | 4 + arch/mips/mach-mtmips/mt7621/tpl/start.S | 161 +++ arch/mips/mach-mtmips/mt7621/tpl/tpl.c | 146 ++ board/mediatek/mt7621/MAINTAINERS | 8 + board/mediatek/mt7621/Makefile | 3 + board/mediatek/mt7621/board.c | 6 + common/spl/Kconfig | 2 +- common/spl/spl_legacy.c | 21 +- common/spl/spl_nand.c | 27 + configs/mt7621_nand_rfb_defconfig | 83 ++ configs/mt7621_rfb_defconfig | 82 ++ doc/board/mediatek/mt7621.rst | 48 + drivers/clk/mtmips/Makefile | 1 + drivers/clk/mtmips/clk-mt7621.c | 294 ++++ drivers/gpio/Kconfig | 2 +- drivers/mmc/mtk-sd.c | 13 + drivers/mtd/nand/raw/Kconfig | 17 +- drivers/mtd/nand/raw/Makefile | 2 + drivers/mtd/nand/raw/mt7621_nand.c | 1224 +++++++++++++++++ drivers/mtd/nand/raw/mt7621_nand.h | 29 + drivers/mtd/nand/raw/mt7621_nand_spl.c | 237 ++++ drivers/net/mtk_eth.c | 45 +- drivers/phy/Kconfig | 2 +- drivers/pinctrl/mtmips/Kconfig | 9 + drivers/pinctrl/mtmips/Makefile | 1 + drivers/pinctrl/mtmips/pinctrl-mt7621.c | 306 +++++ .../pinctrl/mtmips/pinctrl-mtmips-common.c | 4 +- .../pinctrl/mtmips/pinctrl-mtmips-common.h | 12 + drivers/spi/Kconfig | 2 +- drivers/usb/host/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- include/configs/mt7621.h | 67 + include/dt-bindings/clock/mt7621-clk.h | 46 + include/dt-bindings/reset/mt7621-reset.h | 38 + tools/mtk_image.c | 182 +++ tools/mtk_image.h | 24 + 66 files changed, 5906 insertions(+), 36 deletions(-) create mode 100644 arch/mips/dts/mediatek,mt7621-nand-rfb.dts create mode 100644 arch/mips/dts/mediatek,mt7621-rfb.dts create mode 100644 arch/mips/dts/mt7621-u-boot.dtsi create mode 100644 arch/mips/dts/mt7621.dtsi create mode 100644 arch/mips/include/asm/mipsmtregs.h create mode 100644 arch/mips/mach-mtmips/mt7621/Kconfig create mode 100644 arch/mips/mach-mtmips/mt7621/Makefile create mode 100644 arch/mips/mach-mtmips/mt7621/init.c create mode 100644 arch/mips/mach-mtmips/mt7621/mt7621.h create mode 100644 arch/mips/mach-mtmips/mt7621/serial.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/Makefile create mode 100644 arch/mips/mach-mtmips/mt7621/spl/cps.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/dram.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/dram.h create mode 100644 arch/mips/mach-mtmips/mt7621/spl/launch.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/launch.h create mode 100644 arch/mips/mach-mtmips/mt7621/spl/launch_ll.S create mode 100644 arch/mips/mach-mtmips/mt7621/spl/serial.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/spl.c create mode 100644 arch/mips/mach-mtmips/mt7621/spl/start.S create mode 100644 arch/mips/mach-mtmips/mt7621/sram_init.S create mode 100644 arch/mips/mach-mtmips/mt7621/tpl/Makefile create mode 100644 arch/mips/mach-mtmips/mt7621/tpl/start.S create mode 100644 arch/mips/mach-mtmips/mt7621/tpl/tpl.c create mode 100644 board/mediatek/mt7621/MAINTAINERS create mode 100644 board/mediatek/mt7621/Makefile create mode 100644 board/mediatek/mt7621/board.c create mode 100644 configs/mt7621_nand_rfb_defconfig create mode 100644 configs/mt7621_rfb_defconfig create mode 100644 doc/board/mediatek/mt7621.rst create mode 100644 drivers/clk/mtmips/clk-mt7621.c create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c create mode 100644 drivers/mtd/nand/raw/mt7621_nand.h create mode 100644 drivers/mtd/nand/raw/mt7621_nand_spl.c create mode 100644 drivers/pinctrl/mtmips/pinctrl-mt7621.c create mode 100644 include/configs/mt7621.h create mode 100644 include/dt-bindings/clock/mt7621-clk.h create mode 100644 include/dt-bindings/reset/mt7621-reset.h -- 2.17.1

3 40