January 2022 - U-Boot

kwboot : bug when board stops acking
by SC 06 Jan '23

06 Jan '23

Hi list, I think there's a bug in kwboot. I have a faulty board that stops acking xmodem frames after a certain number of packets and kwboot instead of exiting continues to send frames up to 100%. With the one second retry timer it's very long! More than 2 hours :-( The bug is in the kwboot_xm_sendblock() fonction : https://gitlab.denx.de/u-boot/u-boot/blob/master/tools/kwboot.c#L375 kwboot_tty_recv detects the timeout but the return value is based on the last character received (line 403) The variable c is not initialized so if it keeps the previous value which is ACK => rc=0 => infinite loop There are several ways to fix the bug: * Surround the "switch(c)" with a test: if ( !((rc == -1) && (errno == ETIMEDOUT)) ) { rc = -1; switch (c) { case ACK: rc = 0; break; case NAK: errno = EBADMSG; break; case CAN: errno = ECANCELED; break; default: errno = EPROTO; break; } } return rc; * In the case of a TIMEOUT set c to a specific value and add the case in the switch Do you agree with my diagnosis? What is the best solution to fix this bug? Should I provide a patch? Thank you, Stephane

3 2

Netgear RN102 U-Boot Nand Driver Modification
by Abdus Rainey 06 Jan '23

06 Jan '23

I have recently modded a Netgear RN102 NAND flash from 128 MB to 4096 MB (Samsung k9gbg08u0a) but i have a problem with NAND initialization. I can boot with kwboot which is unique for Armada CPU's. Here is my log from kwboot with my stock mtd0: root@whitepawnxeon:/home/jigsaw/Downloads# kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0stockuboot.img -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 0 % [......................................................................] 1 % [......................................................................] 1 % [......................................................................] 2 % [......................................................................] 2 % [......................................................................] 3 % [......................................................................] 3 % [......................................................................] 4 % [......................................................................] 5 % [......... General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully .............................................................] 5 % [......................................................................] 6 % [......................................................................] 6 % [......................................................................] 7 % [......................................................................] 7 % [......................................................................] 8 % [......................................................................] 9 % [......................................................................] 9 % [......................................................................] 10 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 11 % [......................................................................] 12 % [......................................................................] 13 % [......................................................................] 13 % [......................................................................] 14 % [......................................................................] 14 % [......................................................................] 15 % [......................................................................] 15 % [......................................................................] 16 % [......................................................................] 17 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 18 % [......................................................................] 19 % [......................................................................] 19 % [......................................................................] 20 % [......................................................................] 21 % [......................................................................] 21 % [......................................................................] 22 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 23 % [......................................................................] 24 % [......................................................................] 25 % [......................................................................] 25 % [......................................................................] 26 % [......................................................................] 26 % [......................................................................] 27 % [......................................................................] 27 % [......................................................................] 28 % [......................................................................] 29 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 30 % [......................................................................] 31 % [......................................................................] 31 % [......................................................................] 32 % [......................................................................] 33 % [......................................................................] 33 % [......................................................................] 34 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 35 % [......................................................................] 36 % [......................................................................] 37 % [......................................................................] 37 % [......................................................................] 38 % [......................................................................] 38 % [......................................................................] 39 % [......................................................................] 39 % [......................................................................] 40 % [......................................................................] 41 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 42 % [......................................................................] 43 % [......................................................................] 43 % [......................................................................] 44 % [......................................................................] 45 % [......................................................................] 45 % [......................................................................] 46 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 47 % [......................................................................] 48 % [......................................................................] 48 % [......................................................................] 49 % [......................................................................] 50 % [......................................................................] 50 % [......................................................................] 51 % [......................................................................] 51 % [......................................................................] 52 % [......................................................................] 52 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 54 % [......................................................................] 55 % [......................................................................] 55 % [......................................................................] 56 % [......................................................................] 56 % [......................................................................] 57 % [......................................................................] 58 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 59 % [......................................................................] 60 % [......................................................................] 60 % [......................................................................] 61 % [......................................................................] 62 % [......................................................................] 62 % [......................................................................] 63 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 64 % [......................................................................] 65 % [......................................................................] 66 % [......................................................................] 66 % [......................................................................] 67 % [......................................................................] 67 % [......................................................................] 68 % [......................................................................] 68 % [......................................................................] 69 % [......................................................................] 70 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 71 % [......................................................................] 72 % [......................................................................] 72 % [......................................................................] 73 % [......................................................................] 74 % [......................................................................] 74 % [......................................................................] 75 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 76 % [......................................................................] 77 % [......................................................................] 78 % [......................................................................] 78 % [......................................................................] 79 % [......................................................................] 79 % [......................................................................] 80 % [......................................................................] 80 % [......................................................................] 81 % [......................................................................] 82 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 83 % [......................................................................] 84 % [......................................................................] 84 % [......................................................................] 85 % [......................................................................] 86 % [......................................................................] 86 % [......................................................................] 87 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 88 % [......................................................................] 89 % [......................................................................] 90 % [......................................................................] 90 % [......................................................................] 91 % [......................................................................] 91 % [......................................................................] 92 % [......................................................................] 92 % [......................................................................] 93 % [......................................................................] 94 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 95 % [......................................................................] 96 % [......................................................................] 96 % [......................................................................] 97 % [......................................................................] 97 % [......................................................................] 98 % [......................................................................] 99 % [......................................................................] 99 % [......................................] [Type Ctrl-\ + c to quit] __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,52 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] As you can see u-boot sees device id and manufacturer id but cannot recognize it.My stock u-boot is very old and i get u-boot source code from Netgear GPL.(ReadyNASOS_V6.6.0_WW_src.zip) In here https://forum.doozan.com/read.php?2,106589,108204#msg-108204 you can see my whole story about this device. Can someone suggest any solution?

2 1

Nokia RX51 U-Boot USB support updates?
by Tom Rini 27 Nov '22

27 Nov '22

Hey all, So, the DM_USB migration deadline issue has been addressed by the series here: https://patchwork.ozlabs.org/project/uboot/list/?series=252793&state=* which splits out host and gadget support from the CONFIG_USB symbol itself. The migration deadline was for host support, and as noted, N900 is gadget only. That particular issue is resolved. But investigating that issue lead me to figure out some other problems, that I do need someone to say how will be addressed. Now that the other board removal series has been applied, and then with: https://patchwork.ozlabs.org/project/uboot/patch/20210708014348.4010-1-trin… also applied (for which the maintainer is happy to take), this brings N900 as the last and only user of the "old" musb driver (the "new" musb driver is now almost 9 years old) and also the last and only user of the usbtty driver. I suspect that moving to the "new" MUSB driver, for gadget only, and with that enabling DM_USB_GADGET should be a mechanical affair, so long as you can fit within the space constraints of the platform. I'm not immediately sure how hard it will be to update usbtty.c to modern gadget APIs. If there are size problems, then, well, we need solutions proposed (it's possible that some of the usb-uclass.c code is host-only and needs moving, but that likely won't stop gadget from needing it for gadget related information, to bring up a specific example). It's also likely that the MUSB support needs a little further clean-up for supporting building as gadget-only when there's some common code under a host-only check. What I would like is for someone to step forward and say they'll pick up this work. Is there an immediate deadline? No. I don't think that would be helpful. I'm not going to dictate how long it takes for someone to do the work, that's for the person doing the work to say how long they think it'll take. Thanks all! -- Tom

2 6

[PATCH 1/2] spi: fsl_qspi: Add support for i.MX7ULP
by Ye Li 09 Nov '22

09 Nov '22

Add compatible string and driver data for i.MX7ULP. Meanwhile, the address set to SFA1AD/SFA2AD/SFB1AD/SFB2AD should align with 1KB, because the lowest 10 bits are reserved by the registers definition. For i.MX7ULP which has only 128Bytes AHB buffer, must align it when setting the registers and selecting cs. Signed-off-by: Ye Li <ye.li(a)nxp.com> Reviewed-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh(a)nxp.com> --- drivers/spi/fsl_qspi.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index e715f98..d9f531a 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -231,6 +231,15 @@ static const struct fsl_qspi_devtype_data imx6ul_data = { .little_endian = true, }; +static const struct fsl_qspi_devtype_data imx7ulp_data = { + .rxfifo = SZ_64, + .txfifo = SZ_64, + .ahb_buf_size = SZ_128, + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK | + QUADSPI_QUIRK_USE_TDH_SETTING, + .little_endian = true, +}; + static const struct fsl_qspi_devtype_data ls1021a_data = { .rxfifo = SZ_128, .txfifo = SZ_64, @@ -485,7 +494,7 @@ static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_slave *slave) static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op) { memcpy_fromio(op->data.buf.in, - q->ahb_addr + q->selected * q->devtype_data->ahb_buf_size, + q->ahb_addr + q->selected * ALIGN(q->devtype_data->ahb_buf_size, 0x400), op->data.nbytes); } @@ -589,7 +598,7 @@ static int fsl_qspi_exec_op(struct spi_slave *slave, addr_offset = q->memmap_phy; qspi_writel(q, - q->selected * q->devtype_data->ahb_buf_size + addr_offset, + q->selected * ALIGN(q->devtype_data->ahb_buf_size, 0x400) + addr_offset, base + QUADSPI_SFAR); qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) | @@ -695,13 +704,13 @@ static int fsl_qspi_default_setup(struct fsl_qspi *q) * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD, * SFB2AD accordingly. */ - qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) + addr_offset, base + QUADSPI_SFA1AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 2 + addr_offset, base + QUADSPI_SFA2AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 3 + addr_offset, base + QUADSPI_SFB1AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 4 + addr_offset, base + QUADSPI_SFB2AD); q->selected = -1; @@ -799,6 +808,7 @@ static const struct udevice_id fsl_qspi_ids[] = { { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data, }, { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_data, }, { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx7d_data, }, + { .compatible = "fsl,imx7ulp-qspi", .data = (ulong)&imx7ulp_data, }, { .compatible = "fsl,ls1021a-qspi", .data = (ulong)&ls1021a_data, }, { .compatible = "fsl,ls1088a-qspi", .data = (ulong)&ls1088a_data, }, { .compatible = "fsl,ls2080a-qspi", .data = (ulong)&ls2080a_data, }, -- 2.7.4

3 4

[PATCH v2 00/39] efi: Improvements to U-Boot running on top of UEFI
by Simon Glass 14 Oct '22

14 Oct '22

At present U-Boot can be built as an EFI app, but it is really just for testing, with very few features. Instead, the payload build is used for booting on top of UEFI, where U-Boot takes over the machine immediately and supplies its own drivers. But the app could be made more useful. This series provides access to EFI block devices and the video console within U-Boot. It also restructures the app to make it possible to boot a kernel, although further work is needed to implement this. This can be thought of as making U-Boot perform a little like 'grub', in that it runs purely based on UEFI-provided services. Of course a lot more work is required, but this is a start. Note: It would be very useful to include qemu tests of the app and stub in CI. This is available at u-boot-dm/efi-working Changes in v2: - Add MAINTAINERS entry - Add a better boot command too - Add a note that EFI_GRAPHICS_OUTPUT_PROTOCOL is used - Add a sentence about what the patch does - Add a work-around to avoid a toolchain crash - Add new patch to drop the OF_EMBED warning for EFI - Add new patch to enable DM_ETH for the app - Add new patch to support the efi command in the app - Add new patch with maintainer entry - Add support for creating a partition table with a filesystem inside - Add support for running qemu with just a serial console (no display) - Drop mention of partitions from the commit message - Expand the commit message to make things clearer - Fix 'as' typo - Mention why this patch is included in this series - Put this patch first so that it is separated from the rest of the series - Show the correct interface type with 'part list' - Update commit message to mention that these function are x86-specific - Update commit message to mention why the data structure is like it is - Update commit message to mention why ulong is used - Update documentation - Update the commit message to explain things better - Use log_info() instead of printf() Simon Glass (39): RFC: efi: Drop code that doesn't work with driver model efi: Add a separate maintainer entry for the app x86: Keep symbol information in u-boot ELF file x86: Create a new header for EFI x86: Show some EFI info with the bdinfo command x86: Tidy up global_data pointer for 64-bit efi: Add a script for building and testing U-Boot on UEFI efi: Enable DM_ETH for the app efi: Drop the OF_EMBED warning for EFI x86: Create a 32/64-bit selection for the app efi: Create a 64-bit app x86: Don't duplicate global_ptr in 64-bit EFI app efi: Add a way to obtain boot services in the app efi: Add video support to the app efi: Add EFI uclass for media efi: Add a media/block driver for EFI block devices efi: Locate all block devices in the app patman: Use a ValueError exception if tools.Run() fails binman: Report an error if test files fail to compile binman: Support reading the offset of an ELF-file symbol binman: Allow timeout to occur in the image or its section binman: Tidy up comments on _DoTestFile() binman: Support updating the dtb in an ELF file efi: serial: Support arrow keys bloblist: Support allocating the bloblist x86: Allow booting a kernel from the EFI app x86: Don't process the kernel command line unless enabled x86: efi: Add room for the binman definition in the dtb efi: Add comments to struct efi_priv efi: Fix ll_boot_init() operation with the app efi: Add a few comments to the stub efi: Share struct efi_priv between the app and stub code efi: Move exit_boot_services into a function efi: Check for failure when initing the app efi: Mention that efi_info_get() is only used in the stub efi: Show when allocated pages are used efi: Allow easy selection of serial-only operation efi: Update efi_get_next_mem_desc() to avoid needing a map efi: Support the efi command in the app MAINTAINERS | 14 + Makefile | 10 +- arch/sandbox/dts/test.dts | 4 + arch/x86/config.mk | 4 +- arch/x86/cpu/efi/payload.c | 21 +- arch/x86/cpu/intel_common/Makefile | 2 +- arch/x86/cpu/u-boot-64.lds | 2 + arch/x86/cpu/x86_64/Makefile | 4 + arch/x86/cpu/x86_64/cpu.c | 32 +- arch/x86/cpu/x86_64/misc.c | 41 +++ arch/x86/dts/Makefile | 2 +- arch/x86/dts/efi-x86_app.dts | 4 + arch/x86/include/asm/efi.h | 39 +++ arch/x86/include/asm/global_data.h | 2 + arch/x86/include/asm/zimage.h | 3 - arch/x86/lib/Makefile | 1 + arch/x86/lib/bdinfo.c | 22 ++ arch/x86/lib/bootm.c | 11 +- arch/x86/lib/zimage.c | 14 +- board/efi/Kconfig | 15 +- board/efi/efi-x86_app/Kconfig | 6 +- board/efi/efi-x86_app/MAINTAINERS | 11 +- cmd/Makefile | 2 +- cmd/efi.c | 76 +++-- common/Kconfig | 15 +- common/bloblist.c | 16 +- common/board_f.c | 8 +- ..._app_defconfig => efi-x86_app32_defconfig} | 3 +- configs/efi-x86_app64_defconfig | 39 +++ disk/part.c | 5 +- doc/develop/bloblist.rst | 16 + doc/develop/uefi/u-boot_on_efi.rst | 74 ++++- drivers/block/Kconfig | 33 +++ drivers/block/Makefile | 4 + drivers/block/blk-uclass.c | 2 +- drivers/block/efi-media-uclass.c | 15 + drivers/block/efi_blk.c | 115 ++++++++ drivers/block/sb_efi_media.c | 20 ++ drivers/serial/serial_efi.c | 11 +- drivers/video/Kconfig | 2 +- drivers/video/efi.c | 45 ++- include/configs/efi-x86_app.h | 31 +- include/dm/uclass-id.h | 1 + include/efi.h | 123 +++++++- include/efi_api.h | 15 + include/init.h | 2 +- lib/efi/Kconfig | 34 ++- lib/efi/efi.c | 106 +++++++ lib/efi/efi_app.c | 276 +++++++++++++++++- lib/efi/efi_stub.c | 95 +++--- lib/efi_driver/Makefile | 2 +- lib/efi_loader/Kconfig | 1 + lib/efi_loader/efi_device_path.c | 96 ++---- lib/efi_loader/efi_disk.c | 48 --- scripts/build-efi.sh | 188 ++++++++++++ test/dm/Makefile | 1 + test/dm/efi_media.c | 24 ++ tools/binman/binman.rst | 36 +++ tools/binman/cmdline.py | 2 + tools/binman/control.py | 11 + tools/binman/elf.py | 74 ++++- tools/binman/elf_test.py | 45 ++- tools/binman/ftest.py | 91 +++++- tools/binman/test/Makefile | 13 +- tools/binman/test/bss_data.c | 2 +- tools/binman/test/embed_data.c | 16 + tools/binman/test/embed_data.lds | 23 ++ tools/binman/test/u_boot_binman_embed.c | 13 + tools/binman/test/u_boot_binman_embed.lds | 29 ++ tools/binman/test/u_boot_binman_embed_sm.c | 13 + tools/patman/tools.py | 2 +- 71 files changed, 1841 insertions(+), 337 deletions(-) create mode 100644 arch/x86/cpu/x86_64/misc.c create mode 100644 arch/x86/include/asm/efi.h create mode 100644 arch/x86/lib/bdinfo.c rename configs/{efi-x86_app_defconfig => efi-x86_app32_defconfig} (94%) create mode 100644 configs/efi-x86_app64_defconfig create mode 100644 drivers/block/efi-media-uclass.c create mode 100644 drivers/block/efi_blk.c create mode 100644 drivers/block/sb_efi_media.c create mode 100755 scripts/build-efi.sh create mode 100644 test/dm/efi_media.c create mode 100644 tools/binman/test/embed_data.c create mode 100644 tools/binman/test/embed_data.lds create mode 100644 tools/binman/test/u_boot_binman_embed.c create mode 100644 tools/binman/test/u_boot_binman_embed.lds create mode 100644 tools/binman/test/u_boot_binman_embed_sm.c -- 2.33.0.685.g46640cef36-goog

4 73

[PATCH v2 00/38] binman: Add support for bintools and missing tools
by Simon Glass 10 Oct '22

10 Oct '22

At present binman uses binary tools (like cbfstool, futiltiy, lz4) in an ad-hoc manner. Various parts of binman use tools.Run() to run tools as needed. If a tool is missing, an error is produced and binman stops. However this is not ideal. CI systems want to be able to complete the build, even if tools are missing. Ideally binman would deal with missing binary tools the same way it deals with missing binary blobs: make a note of it and move on. This series introduces this feature to binman. `Bintool` is the name binman gives to a binary tool which it uses to create and manipulate binaries that binman cannot handle itself. Binman provides various features to manage bintools: - Determining whether the tool is currently installed - Downloading or building the tool - Determining the version of the tool that is installed - Deciding which tools are needed to build an image As with external blobs, bintools (which are like 'external' tools) can be missing. When building an image requires a bintool and it is not installed, binman detects this and reports the problem, but continues to build an image. Of course the image will not work, but binman reports which bintools are needed and also provide a way to fetch them. The final patch shows how this works in practice with a chosen board. The Odroid-C2 is quite a complicated image with many steps. It is an ideal example for how Binman can be used. The series is available at u-boot-dm/bin-working Changes in v2: - Substantial rewrite, introducing the concept of bintools Simon Glass (38): Makefile: Fake external blobs by default with binman binman: Tweak elf tests for a toolchain change mkimage: Show the external-offset error binman: Expand the external FIT test a little patman: Allow running a tool and returning the full result buildman: Move the download function to tools patman: Tidy up the download function a little patman: Add a function to find a tool on the path binman: Write fake blobs to the output directory binman: Drop the image name from the fake-blob message binman: Allow faked blobs in blob-ext-list binman: Correct path for fip_util binman: Add installation instructions binman: Add support for bintools binman: Plumb in support for bintools binman: Add tests for bintool binman: Add a bintool implementation for cbfstool binman: Add a bintool implementation for fiptool binman: Add a bintool implementation for futility binman: Add a bintool implementation for ifwitool binman: Add a bintool implementation for mkimage binman: Enable bintool tests including cmdline processing binman: Convert to using the CBFS bintool binman: Convert to using the FIP bintool binman: Convert to using the futility bintool binman: Convert to using the ifwitool bintool binman: Convert to using the mkimage bintool binman: Move compression into binman binman: Tidy up pylint warnings in comp_util binman: Add a bintool implementation for lz4 binman: Convert to using the lz4 bintool binman: Add a bintool implementation for lzma_alone binman: Convert to using the lzma_alone bintool binman: Plumb in support for missing bintools binman: Complete test coverage of comp_util binman: Add a command to generate bintool docs binman: Add documentation for bintools RFC: Move Odroid-C2 to use binman to produce the image Makefile | 2 +- arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi | 107 +++++ arch/arm/mach-meson/Kconfig | 1 + doc/board/amlogic/odroid-c4.rst | 127 ++--- doc/develop/package/bintools.rst | 1 + tools/binman/binman.rst | 98 +++- tools/binman/bintool.py | 466 +++++++++++++++++++ tools/binman/bintool_test.py | 353 ++++++++++++++ tools/binman/bintools.rst | 139 ++++++ tools/binman/btool/_aml_common.py | 47 ++ tools/binman/btool/_testing.py | 36 ++ tools/binman/btool/aml_encrypt_g12a.py | 82 ++++ tools/binman/btool/aml_encrypt_g12b.py | 83 ++++ tools/binman/btool/cbfstool.py | 219 +++++++++ tools/binman/btool/fiptool.py | 123 +++++ tools/binman/btool/futility.py | 178 +++++++ tools/binman/btool/ifwitool.py | 166 +++++++ tools/binman/btool/lz4.py | 140 ++++++ tools/binman/btool/lzma_alone.py | 126 +++++ tools/binman/btool/mkimage.py | 80 ++++ tools/binman/cbfs_util.py | 33 +- tools/binman/cbfs_util_test.py | 59 +-- tools/binman/cmdline.py | 12 + tools/binman/comp_util.py | 76 +++ tools/binman/control.py | 50 +- tools/binman/elf_test.py | 8 +- tools/binman/entries.rst | 138 ++++++ tools/binman/entry.py | 67 ++- tools/binman/etype/aml_encrypt.py | 262 +++++++++++ tools/binman/etype/blob.py | 8 +- tools/binman/etype/blob_ext_list.py | 1 + tools/binman/etype/fit.py | 20 +- tools/binman/etype/gbb.py | 37 +- tools/binman/etype/intel_ifwi.py | 25 +- tools/binman/etype/mkimage.py | 13 +- tools/binman/etype/section.py | 19 +- tools/binman/etype/vblock.py | 32 +- tools/binman/fip_util.py | 26 -- tools/binman/fip_util_test.py | 25 +- tools/binman/ftest.py | 173 ++++++- tools/binman/image.py | 14 + tools/binman/main.py | 11 +- tools/binman/missing-blob-help | 6 + tools/binman/test/162_fit_external.dts | 2 +- tools/binman/test/213_aml_encrypt.dts | 51 ++ tools/binman/test/214_list_no_dtb.dts | 23 + tools/binman/test/218_blob_ext_list_fake.dts | 14 + tools/buildman/toolchain.py | 46 +- tools/fit_image.c | 5 +- tools/patman/tools.py | 238 +++++----- 50 files changed, 3619 insertions(+), 449 deletions(-) create mode 120000 doc/develop/package/bintools.rst create mode 100644 tools/binman/bintool.py create mode 100644 tools/binman/bintool_test.py create mode 100644 tools/binman/bintools.rst create mode 100644 tools/binman/btool/_aml_common.py create mode 100644 tools/binman/btool/_testing.py create mode 100644 tools/binman/btool/aml_encrypt_g12a.py create mode 100644 tools/binman/btool/aml_encrypt_g12b.py create mode 100644 tools/binman/btool/cbfstool.py create mode 100644 tools/binman/btool/fiptool.py create mode 100644 tools/binman/btool/futility.py create mode 100644 tools/binman/btool/ifwitool.py create mode 100644 tools/binman/btool/lz4.py create mode 100644 tools/binman/btool/lzma_alone.py create mode 100644 tools/binman/btool/mkimage.py create mode 100644 tools/binman/comp_util.py create mode 100644 tools/binman/etype/aml_encrypt.py create mode 100644 tools/binman/test/213_aml_encrypt.dts create mode 100644 tools/binman/test/214_list_no_dtb.dts create mode 100644 tools/binman/test/218_blob_ext_list_fake.dts -- 2.34.1.575.g55b058a8bb-goog

3 82

[PATCH] riscv: Fix build against binutils 2.38
by Alexandre Ghiti 02 Oct '22

02 Oct '22

The following description is copied from the equivalent patch for the Linux Kernel proposed by Aurelien Jarno: >From version 2.38, binutils default to ISA spec version 20191213. This means that the csr read/write (csrr*/csrw*) instructions and fence.i instruction has separated from the `I` extension, become two standalone extensions: Zicsr and Zifencei. As the kernel uses those instruction, this causes the following build failure: arch/riscv/cpu/mtrap.S: Assembler messages: arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause' arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc' arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval' arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0' Signed-off-by: Alexandre Ghiti <alexandre.ghiti(a)canonical.com> --- arch/riscv/Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 0b80eb8d86..53d1194ffb 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y) CMODEL = medany endif -ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \ +RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C) + +# Newer binutils versions default to ISA spec version 20191213 which moves some +# instructions from the I extension to the Zicsr and Zifencei extensions. +toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei) +ifeq ($(toolchain-need-zicsr-zifencei),y) + RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei +endif + +ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \ -mcmodel=$(CMODEL) PLATFORM_CPPFLAGS += $(ARCH_FLAGS) -- 2.32.0

8 23

[PATCH 0/3] Conformance Profiles Table support in U-boot
by Jose Marinho 30 Aug '22

30 Aug '22

The Conformance Profiles Table (ECPT) table will be included in the UEFI specification 2.9+. The ECPT table was introduced in UEFI following the code-first path. The acceptance ticket can be viewed at: https://bugzilla.tianocore.org/show_bug.cgi?id=3591 This patch set implements the ECPT table in U-boot. Jose Marinho (3): efi: Create ECPT table efi: ECPT add EBBRv2.0 conformance profile cmd: efi: efidebug print ECPT table cmd/efidebug.c | 45 +++++++++++++++++++ include/efi_api.h | 14 ++++++ include/efi_loader.h | 9 ++++ lib/efi_loader/Kconfig | 12 +++++ lib/efi_loader/Makefile | 1 + lib/efi_loader/efi_conformance.c | 75 ++++++++++++++++++++++++++++++++ lib/efi_loader/efi_setup.c | 6 +++ 7 files changed, 162 insertions(+) create mode 100644 lib/efi_loader/efi_conformance.c -- 2.25.1

3 17

[PATCH 1/2] xyz-modem: Wait infinitely for initial y-modem packet
by Pali Rohár 29 Aug '22

29 Aug '22

Now when command loady can be aborted / cancelled by CTRL+C, change wait timeout for initial packet to infinite. This would allow user to not be hurry when locating file which want to send. Commands loadb and loads already waits infinitely too. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- common/xyzModem.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/common/xyzModem.c b/common/xyzModem.c index ece25acb183b..d6be489a174b 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -449,8 +449,14 @@ xyzModem_stream_open (connection_info_t * info, int *err) return 0; } - while (retries-- > 0) + while (1) { + if (--retries <= 0) + { + retries = xyzModem_MAX_RETRIES; + crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; + xyz.crc_mode = true; + } stat = xyzModem_get_hdr (); if (stat == 0) { -- 2.20.1

4 18

[PATCH 0/5] arm: mvebu: Automatically detect CONFIG_SYS_TCLK
by Pali Rohár 16 Aug '22

16 Aug '22

This patch series automatically detects CONFIG_SYS_TCLK value, set it in global mach/soc.h file and remove manual CONFIG_SYS_TCLK value from all mvebu/kirkwood board config files. So it just a cleanup to avoid defining custom macros in board config files which can be automatically detected. Could you test these patches on a38x and a37x platforms that nothing is broken? I tested them on a38x Turris Omnia. Pali Rohár (5): arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR register arm: mvebu: msys: Set CONFIG_SYS_TCLK globally arm: mvebu: axp: Set CONFIG_SYS_TCLK globally arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK arch/arm/mach-kirkwood/include/mach/kw88f6281.h | 2 -- arch/arm/mach-mvebu/include/mach/soc.h | 15 ++++++++++----- include/configs/clearfog.h | 1 - include/configs/controlcenterdc.h | 2 -- include/configs/crs3xx-98dx3236.h | 1 - include/configs/db-88f6720.h | 1 - include/configs/db-88f6820-amc.h | 2 -- include/configs/db-88f6820-gp.h | 2 -- include/configs/db-mv784mp-gp.h | 1 - include/configs/db-xc3-24g4xg.h | 1 - include/configs/ds414.h | 1 - include/configs/helios4.h | 1 - include/configs/lacie_kw.h | 5 ----- include/configs/lsxl.h | 2 -- include/configs/maxbcm.h | 1 - include/configs/theadorable.h | 1 - include/configs/turris_omnia.h | 1 - include/configs/x530.h | 2 -- 18 files changed, 10 insertions(+), 32 deletions(-) -- 2.20.1

4 19