August 2021 - U-Boot

[PATCH 0/3] arm: kirkwood: Convert the GoFlex Home board Ethernet and SATA to Driver Model.
by Tony Dinh 11 Aug '21

11 Aug '21

- Enable DM SATA and SATA MV driver - Enable DM Ethernet. - Use Ethernet PHY names from device tree. - Replace the old Ethernet PHY addr lookup with a device tree parsing lookup function. Tony Dinh (3): arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configs arm: kirkwood: GoFlex Home: Add DM SATA configs arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree board/Seagate/goflexhome/goflexhome.c | 57 +++++++++++++++++++++------ configs/goflexhome_defconfig | 5 ++- include/configs/goflexhome.h | 6 +++ 3 files changed, 55 insertions(+), 13 deletions(-) -- 2.20.1

2 7

[PATCH] aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS
by Tom Rini 10 Aug '21

10 Aug '21

Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS in order to not further add to the CONFIG namespace. Cc: Heiko Schocher <hs(a)denx.de> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- include/configs/aristainetos2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 78fa1a969e7f..69398787d9e7 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -93,13 +93,13 @@ #endif #if (CONFIG_SYS_BOARD_VERSION == 5) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ +#define EXTRA_ENV_BOARD_SETTINGS \ "dead=while true; do; " \ "led led_red on; sleep 1;" \ "led led_red off; sleep 1;" \ "done\0" #elif (CONFIG_SYS_BOARD_VERSION == 6) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ +#define EXTRA_ENV_BOARD_SETTINGS \ "dead=while true; do; " \ "led led_red on; led led_red2 on; sleep 1;" \ "led led_red off; led led_red2 off;; sleep 1;" \ @@ -414,7 +414,7 @@ "run main_rescue_boot;" \ "fi; \0"\ HAB_EXTRA_SETTINGS \ - CONFIG_EXTRA_ENV_BOARD_SETTINGS + EXTRA_ENV_BOARD_SETTINGS #define CONFIG_ARP_TIMEOUT 200UL -- 2.17.1

1 0

[PATCH] x86: Ensure the e820 map is installed in all cases
by Simon Glass 10 Aug '21

10 Aug '21

This is a revert of a recent logic change in setup_zimage(). We do actually need to install this information always. Change it to install from the Coreboot tables if available, else the normal source. Fixes: e7bae8283fe ("x86: Allow installing an e820 when booting from coreboot") Signed-off-by: Simon Glass <sjg(a)chromium.org> --- arch/x86/lib/zimage.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 90fc8a466d7..cf4210cd4ba 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -313,12 +313,12 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, int bootproto = get_boot_protocol(hdr, false); log_debug("Setup E820 entries\n"); - if (ll_boot_init()) { - setup_base->e820_entries = install_e820_map( - ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); - } else if (IS_ENABLED(CONFIG_COREBOOT_SYSINFO)) { + if (IS_ENABLED(CONFIG_COREBOOT_SYSINFO)) { setup_base->e820_entries = cb_install_e820_map( ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); + } else { + setup_base->e820_entries = install_e820_map( + ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); } if (bootproto == 0x0100) { -- 2.32.0.93.g670b81a890-goog

3 3

U-boot doesn't start anymore
by Claudiu Petre 10 Aug '21

10 Aug '21

Hi, I have an U_Boot tailored for a specific board. In this U_Boot we have a command: “*myperipheral*" U_BOOT_CMD( myperipheral, 6, 0, do_my_periph, "my peripheral info", /* */"info - important hw info\n" " myperipheral [disable/enable] - disable/enable system\n" " myperipheral stop - stop the driver\n" " myperipheral reapply-clocks - reapply clock setting \n" " myperipheral reg <offset> - read register\n" ); Everything works fine so far. Then I changed this command by adding a new parameter : *test* U_BOOT_CMD( myperipheral, 6, 0, do_my_periph, "my peripheral info", /* */"info - important hw info\n" " myperipheral [disable/enable] - disable/enable system\n" " myperipheral stop - stop the driver\n" " myperipheral reapply-clocks - reapply clock setting \n" " myperipheral reg <offset> - read register\n" *" myperipheral test - periph test"* ); So I added a function *my_test_func(),* which is called when “myperipheral test” command is issued on u_boot cmd line. void *my_test_func* (void) { int i=0; printf("Test nr %d\n", i++); printf("Test nr %d\n", i++); printf("Test nr %d\n", i++); printf("Test nr %d\n", i++); printf("Test nr %d\n", i++); // and more 20 lines with printf("Test nr %d\n", i++); } Again everything works fine when I issue “myperipheral test" , I can see 25 time of prints . But when I add another 25 lines of prints in my_test_func, rebuild and reflash, the U_Boot does not start anymore. Does anyone knows why ? I mention that I’ve tried to add this my_test_function() (on both variants with 25 and 50 prints) in myperipheral_probe() and got the same results: with 25 U_boot starts and prints, and with 50 u_boot doesn’t start! Of course I have real problem to solve, but my real problem leads me to this test, because something like this I need to do in my real problem. Best regards, Claudiu

1 0

[PATCH] crypto/fsl: fix missed dma_addr_t -> caam_dma_addr_t conversion
by Horia Geantă 10 Aug '21

10 Aug '21

One of the "dma_addr_t" instances was left out when converting to "caam_dma_addr_t". Fixes: 2ff17d2f74c5 ("crypto: fsl: refactor for 32 bit version CAAM support on ARM64") Signed-off-by: Horia Geantă <horia.geanta(a)nxp.com> --- drivers/crypto/fsl/jobdesc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index d23541553181..c350b3285616 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -300,7 +300,7 @@ void inline_cnstr_jobdesc_rng_deinstantiation(u32 *desc, int handle) void inline_cnstr_jobdesc_rng(u32 *desc, void *data_out, u32 size) { - dma_addr_t dma_data_out = virt_to_phys(data_out); + caam_dma_addr_t dma_data_out = virt_to_phys(data_out); init_job_desc(desc, 0); append_operation(desc, OP_ALG_ALGSEL_RNG | OP_TYPE_CLASS1_ALG | -- 2.17.1

1 0

[PATCH v2 0/3] arm64: Add optimized memset/memcpy functions
by Stefan Roese 10 Aug '21

10 Aug '21

On an NXP LX2160 based platform it has been noticed, that the currently implemented memset/memcpy functions for aarch64 are suboptimal. Especially the memset() for clearing the NXP MC firmware memory is very expensive (time-wise). By using optimized functions, a speedup of ~ factor 6 has been measured. This patchset now adds the optimized functions ported from this repository: https://github.com/ARM-software/optimized-routines As the optimized memset function make use of the dc opcode, which needs the caches to be enabled, an additional check is added and a simple memset version is used in this case. Please note that checkpatch.pl complains about some issue with this imported file: arch/arm/lib/asmdefs.h Since it's imported I did explicitly not make any changes here, to make potential future sync'ing easer. Thanks, Stefan Changes in v2: - Add file names and locations and git commit ID from imported files to the commit message - New patch Stefan Roese (3): arm64: arch/arm/lib: Add optimized memset/memcpy functions arm64: memset-arm64: Use simple memset when cache is disabled arm64: Kconfig: Enable usage of optimized memset/memcpy arch/arm/Kconfig | 10 +- arch/arm/lib/Makefile | 5 + arch/arm/lib/asmdefs.h | 98 +++++++++++++++ arch/arm/lib/memcpy-arm64.S | 241 ++++++++++++++++++++++++++++++++++++ arch/arm/lib/memset-arm64.S | 146 ++++++++++++++++++++++ 5 files changed, 494 insertions(+), 6 deletions(-) create mode 100644 arch/arm/lib/asmdefs.h create mode 100644 arch/arm/lib/memcpy-arm64.S create mode 100644 arch/arm/lib/memset-arm64.S -- 2.32.0

2 7

[PATCH 0/9] meson64_android: Android boot flow using abootimg
by Mattijs Korpershoek 10 Aug '21

10 Aug '21

The SEI-610 and SEI-510 boards are well supported in the Android Open Source project via the yukawa [1] platform. Their U-Boot version, despite being public [2] is not in mainline. Android 10 and higher have significantly reworked the bootloader requirements: * bootloader should pass slot information in case of A/B * bootloader should perform AVB verification in case it's supported * bootloader should read and apply dtb overlays from a dtbo partition These series add support for all the above. [1] https://android.googlesource.com/device/amlogic/yukawa [2] https://gitlab.com/baylibre/amlogic/atv/u-boot/-/tree/u-boot/v2021.07/integ Guillaume La Roque (2): configs: meson64_android: boot android via abootimg configs: sei510/610: android bootflow via abootimg Mattijs Korpershoek (7): configs: meson64: permit redefining SYS_MALLOC_LEN configs: meson64_android: increase SYS_MALLOC_LEN to 128M for AVB configs: meson64_android: implement AVB support configs: meson64_android: implement A/B slot support configs: meson64_android: define BOOT_CMD macro configs: sei510/sei610: reformat PARTS_default configs: sei510/sei610: don't use hard-coded gpt uuids configs/sei510_defconfig | 5 ++ configs/sei610_defconfig | 5 ++ include/configs/meson64.h | 2 + include/configs/meson64_android.h | 139 ++++++++++++++++++++++++++++-- include/configs/sei510.h | 23 +++-- include/configs/sei610.h | 23 +++-- 6 files changed, 165 insertions(+), 32 deletions(-) -- 2.30.2

3 29

[PATCH 0/6] Cortina Firmware fixes
by Kuldeep Singh 10 Aug '21

10 Aug '21

Cortina firmware currently supports non-tfa boot support and therefore incorrect firmware address value is obtained. This patchset is an attempt to fix cortina firmware. LS2088A-RDB, T2080RDB and T4240RDB are also updated to incorporate multiple firmware address values by extending a weak function. Kuldeep Singh (6): env: Kconfig: Add default option for PHY_CORTINA configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to Kconfig net: cortina: Add support for tfa boot in cortina firmware board: ls2088ardb: Extend cs4340_get_fw_addr() functionality board: t208x: Extend cs4340_get_fw_addr() functionality board: T4240rdb: Extend cs4340_get_fw_addr() functionality board/freescale/ls2080ardb/ls2080ardb.c | 38 +++++++++ board/freescale/t208xrdb/t208xrdb.c | 20 +++++ board/freescale/t208xrdb/t208xrdb.h | 3 + board/freescale/t4rdb/t4240rdb.c | 19 +++++ board/freescale/t4rdb/t4rdb.h | 3 + configs/T2080RDB_NAND_defconfig | 1 + configs/T2080RDB_SDCARD_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2080RDB_defconfig | 1 + configs/T2080RDB_revD_NAND_defconfig | 1 + configs/T2080RDB_revD_SDCARD_defconfig | 1 + configs/T2080RDB_revD_SPIFLASH_defconfig | 1 + configs/T2080RDB_revD_defconfig | 1 + configs/T4240RDB_SDCARD_defconfig | 1 + configs/T4240RDB_defconfig | 1 + configs/ls2080ardb_SECURE_BOOT_defconfig | 1 + configs/ls2080ardb_defconfig | 1 + configs/ls2080ardb_nand_defconfig | 1 + configs/ls2081ardb_defconfig | 1 + configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls2088ardb_qspi_defconfig | 1 + drivers/net/phy/Kconfig | 10 +++ drivers/net/phy/cortina.c | 79 ++++++++++++++++--- env/Kconfig | 2 +- include/configs/T208xRDB.h | 6 -- include/configs/T4240RDB.h | 2 - include/configs/ls2080ardb.h | 10 --- scripts/config_whitelist.txt | 2 - 28 files changed, 179 insertions(+), 31 deletions(-) -- 2.25.1

1 6

Pull request: u-boot-imx u-boot-imx-20210809
by Stefano Babic 09 Aug '21

09 Aug '21

Hi Tom, please pull from u-boot-imx, thanks ! This mainly contains support for new SOC mx8ulp - the rest are fixes for ventana / Toradex boards, and a couple of pacthes I missed previously. The following changes since commit ab97eb341cb4fdbd69e33bd4a53714db95b5b63e: Merge branch '2021-08-04-assorted-minor-fixes' (2021-08-04 21:18:33 -0400) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-imx.git tags/u-boot-imx-20210809 for you to fetch changes up to a8f46306413e2b47d1c93e45436ed11f5bb2c4c3: imx: cmd: use struct cmd_tbl (2021-08-09 14:46:51 +0200) ---------------------------------------------------------------- u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639 ---------------------------------------------------------------- Fabio Estevam (6): imx28-evk: Import devicetree file from Linux mx6cuboxi: Fix the mmc device for the rootfs mx6cuboxi: Fix the console variable warp: Use the correct symbol for CONFIG_IMX_HAB mx7dsabresd: Select CONFIG_IMX_HAB mx28evk: Convert to driver model Ming Liu (1): board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL Oleksandr Suvorov (2): board: colibri-imx8x: update building documentation board: colibri_vf: fix compiling warning Peng Fan (25): arm: imx: add i.MX8ULP basic Kconfig option arm: imx: add i.MX8ULP cpu type and helper arm: imx: sys_proto: move boot mode define to common header arm: imx8ulp: support print cpu info imx: imx8ulp: add get reset cause arm: imx: basic i.MX8ULP support arm: imx: parse-container: guard included header files arm: imx: move container Kconfig under mach-imx net: fec_mxc: support i.MX8ULP driver: serial: fsl_lpuart: support i.MX8ULP arm: imx8ulp: add clock support drivers: mmc: fsl_esdhc_imx: support i.MX8ULP arm: imx8ulp: disable wdog3 arm: imx8ulp: add rdc support arm: imx8ulp: add trdc release request arm: imx8ulp: release trdc and assign lpav from RTD to APD imx8ulp: unify rdc functions arm: imx8ulp: add dummy imx_get_mac_from_fuse arm: imx8ulp: add iomuxc support imx8ulp: soc: correct reset cause imx8ulp: move struct mu_type to common header imx8ulp: add upower api support arm: dts: add i.MX8ULP dtsi arm: imx: add i.MX8ULP EVK support imx: cmd: use struct cmd_tbl Sebastian Reichel (1): board: ge: bx50v3: Add PCIe reset to DT Stefan Agner (2): board: colibri_imx7: use SDP if USB serial downloader has been used board: toradex: make USB PID from config block optional Tim Harvey (25): imx: ventana: ignore EEPROM config when checking for NAND support imx: ventana: move wdog/uhs-i board/revision dt fixups imx: ventana: remove nand field from common ventana struct imx: ventana: replace hard-coded LED config with dt based config imx: ventana: remove hard-coded USB HUBRST# gpio config imx: ventana: fix UMS support imx: ventana: remove hard-coded PCI reset imx: ventana: remove hard-coded USB OTG pinmux imx: ventana: remove hard-coded analog video codec enable imx: ventana: remove hard-coded flexcan standby pin imx: ventana: use dt for hwmon imx: ventana: add GW5910 support imx: ventana: add GW5912 support imx: ventana: add GW5913 support imx: ventana: add support for GW53xx-G revision imx: ventana: add support for GW54xx-G revision arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS arm: dts: imx8mm-venice-gw700x: fix fifo-depth phy props arm: dts: imx8mm-venice-gw7901: use common u-boot dtsi board: gateworks: venice: get mem size from dt board: gateworks: venice: use bus numbers vs names board: gateworks: venice: add board model/serial# to env board: gateworks: venice: add imx8mm-gw7902 support configs: imx8mm_venice_defconfig: remove unused SPL features board: gateworks: venice: add board model to dt Ye Li (20): arm: imx8: Move container parser and image to mach-imx common folder arm: imx8: Move container image header file to mach-imx arm: imx8ulp: add container support driver: misc: Add MU and S400 API to communicate with Sentinel pinctrl: Add pinctrl driver for imx8ulp arm: imx8ulp: soc: Change to use CMC1 to get bootcfg arm: imx8ulp: Enable full L2 cache in SPL arm: imx8ulp: Update the reset vector in u-boot drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6 drivers: misc: imx8ulp: Add S400 API for image authentication drivers: misc: imx8ulp: Update S400 API for release RDC drivers: misc: s400_api: Update API for fuse read and write arm: imx8ulp: release and configure XRDC at early phase arm: imx8ulp: Probe the S400 MU device in arch init arm: iMX8ULP: Add boot device relevant functions arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain driver: misc: imx8ulp: Add fuse driver for imx8ulp imx8ulp: Use DGO_GP5 to get boot config imx8ulp: Add workaround for eMMC boot ddr: Add DDR driver for iMX8ULP arch/arm/Kconfig | 11 ++ arch/arm/Makefile | 4 +- arch/arm/dts/Makefile | 5 + arch/arm/dts/imx28-evk-u-boot.dtsi | 10 ++ arch/arm/dts/imx28-evk.dts | 360 ++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 10 ++ arch/arm/dts/imx6qdl-gw51xx.dtsi | 5 +- arch/arm/dts/imx6qdl-gw52xx.dtsi | 5 +- arch/arm/dts/imx6qdl-gw53xx.dtsi | 4 +- arch/arm/dts/imx6qdl-gw54xx.dtsi | 5 +- arch/arm/dts/imx6qdl-gw551x.dtsi | 4 +- arch/arm/dts/imx6qdl-gw552x.dtsi | 4 +- arch/arm/dts/imx6qdl-gw553x.dtsi | 5 +- arch/arm/dts/imx6qdl-gw560x.dtsi | 4 +- arch/arm/dts/imx6qdl-gw5904.dtsi | 4 +- arch/arm/dts/imx6qdl-gw5907.dtsi | 4 +- arch/arm/dts/imx6qdl-gw5912.dtsi | 4 +- arch/arm/dts/imx6qdl-gw5913.dtsi | 4 +- arch/arm/dts/imx8mm-venice-gw700x.dtsi | 3 +- arch/arm/dts/imx8mm-venice-gw71xx.dtsi | 5 +- arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi | 35 +---- arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi | 80 ++++++++++++ arch/arm/dts/imx8mm-venice-gw7902.dts | 927 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 40 ++++++ arch/arm/dts/imx8ulp-evk.dts | 223 +++++++++++++++++++++++++++++++ arch/arm/dts/imx8ulp-pinfunc.h | 978 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx8ulp.dtsi | 728 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-imx/cpu.h | 4 + arch/arm/include/asm/arch-imx8ulp/cgc.h | 130 ++++++++++++++++++ arch/arm/include/asm/arch-imx8ulp/clock.h | 41 ++++++ arch/arm/include/asm/arch-imx8ulp/ddr.h | 38 ++++++ arch/arm/include/asm/arch-imx8ulp/gpio.h | 20 +++ arch/arm/include/asm/arch-imx8ulp/imx-regs.h | 162 +++++++++++++++++++++++ arch/arm/include/asm/arch-imx8ulp/imx8ulp-pins.h | 60 +++++++++ arch/arm/include/asm/arch-imx8ulp/iomux.h | 82 ++++++++++++ arch/arm/include/asm/arch-imx8ulp/mu_hal.h | 12 ++ arch/arm/include/asm/arch-imx8ulp/pcc.h | 139 ++++++++++++++++++++ arch/arm/include/asm/arch-imx8ulp/rdc.h | 27 ++++ arch/arm/include/asm/arch-imx8ulp/s400_api.h | 41 ++++++ arch/arm/include/asm/arch-imx8ulp/sys_proto.h | 19 +++ arch/arm/include/asm/arch-imx8ulp/upower.h | 15 +++ arch/arm/include/asm/arch-mx7ulp/sys_proto.h | 9 -- arch/arm/include/asm/global_data.h | 5 + arch/arm/include/asm/{arch-imx8 => mach-imx}/image.h | 2 + arch/arm/include/asm/mach-imx/sys_proto.h | 13 +- arch/arm/mach-imx/Kconfig | 15 ++- arch/arm/mach-imx/Makefile | 5 + arch/arm/mach-imx/cmd_dek.c | 2 +- arch/arm/mach-imx/cmd_mfgprot.c | 2 +- arch/arm/mach-imx/{imx8/image.c => image-container.c} | 51 +++++++- arch/arm/mach-imx/imx8/Kconfig | 13 -- arch/arm/mach-imx/imx8/Makefile | 3 - arch/arm/mach-imx/imx8/ahab.c | 2 +- arch/arm/mach-imx/imx8ulp/Kconfig | 23 ++++ arch/arm/mach-imx/imx8ulp/Makefile | 11 ++ arch/arm/mach-imx/imx8ulp/cgc.c | 455 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/clock.c | 397 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/iomux.c | 58 +++++++++ arch/arm/mach-imx/imx8ulp/lowlevel_init.S | 26 ++++ arch/arm/mach-imx/imx8ulp/pcc.c | 449 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/rdc.c | 411 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/soc.c | 545 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/upower/Makefile | 6 + arch/arm/mach-imx/imx8ulp/upower/upower_api.c | 485 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/upower/upower_api.h | 258 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8ulp/upower/upower_hal.c | 180 +++++++++++++++++++++++++ arch/arm/mach-imx/{imx8 => }/parse-container.c | 4 +- arch/arm/mach-imx/priblob.c | 2 +- arch/arm/mach-imx/spl_imx_romapi.c | 172 ++++++++++++++++++------ board/freescale/imx8ulp_evk/Kconfig | 14 ++ board/freescale/imx8ulp_evk/MAINTAINERS | 6 + board/freescale/imx8ulp_evk/Makefile | 7 + board/freescale/imx8ulp_evk/ddr_init.c | 207 +++++++++++++++++++++++++++++ board/freescale/imx8ulp_evk/imx8ulp_evk.c | 67 ++++++++++ board/freescale/imx8ulp_evk/lpddr4_timing.c | 1158 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/freescale/imx8ulp_evk/spl.c | 105 +++++++++++++++ board/freescale/mx28evk/MAINTAINERS | 1 + board/freescale/mx28evk/mx28evk.c | 77 ----------- board/gateworks/gw_ventana/common.c | 572 ++++++++++++++++++++++++++++++++++++++++++-------------------------------------- board/gateworks/gw_ventana/common.h | 6 +- board/gateworks/gw_ventana/eeprom.c | 6 + board/gateworks/gw_ventana/gsc.c | 172 +++++++++++++++--------- board/gateworks/gw_ventana/gw_ventana.c | 180 +------------------------ board/gateworks/gw_ventana/gw_ventana_spl.c | 7 +- board/gateworks/gw_ventana/ventana_eeprom.h | 3 + board/gateworks/venice/gsc.c | 82 ++++++------ board/gateworks/venice/gsc.h | 6 + board/gateworks/venice/imx8mm_venice.c | 40 ++++-- board/gateworks/venice/lpddr4_timing.c | 516 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/gateworks/venice/lpddr4_timing.h | 1 + board/gateworks/venice/spl.c | 13 +- board/toradex/colibri_imx6/colibri_imx6.c | 10 ++ board/toradex/colibri_imx7/colibri_imx7.c | 10 ++ board/toradex/colibri_vf/colibri_vf.c | 2 +- board/toradex/common/Kconfig | 10 ++ board/toradex/common/tdx-common.c | 2 +- board/warp/imximage.cfg | 2 +- configs/gwventana_emmc_defconfig | 3 + configs/gwventana_gw5904_defconfig | 3 + configs/gwventana_nand_defconfig | 3 + configs/imx8mm_venice_defconfig | 4 +- configs/imx8ulp_evk_defconfig | 103 +++++++++++++++ configs/mx28evk_defconfig | 18 ++- configs/mx7dsabresd_defconfig | 1 + doc/board/toradex/colibri-imx8x.rst | 27 ++-- drivers/Makefile | 1 + drivers/ddr/imx/Kconfig | 1 + drivers/ddr/imx/imx8ulp/Kconfig | 11 ++ drivers/ddr/imx/imx8ulp/Makefile | 9 ++ drivers/ddr/imx/imx8ulp/ddr_init.c | 217 ++++++++++++++++++++++++++++++ drivers/misc/Makefile | 1 + drivers/misc/imx8ulp/Makefile | 4 + drivers/misc/imx8ulp/fuse.c | 198 ++++++++++++++++++++++++++++ drivers/misc/imx8ulp/imx8ulp_mu.c | 234 +++++++++++++++++++++++++++++++++ drivers/misc/imx8ulp/s400_api.c | 244 ++++++++++++++++++++++++++++++++++ drivers/mmc/Kconfig | 2 +- drivers/mmc/fsl_esdhc_imx.c | 12 +- drivers/net/Kconfig | 2 +- drivers/net/fec_mxc.c | 2 +- drivers/pinctrl/nxp/Kconfig | 14 ++ drivers/pinctrl/nxp/Makefile | 1 + drivers/pinctrl/nxp/pinctrl-imx8ulp.c | 44 +++++++ include/configs/ge_bx50v3.h | 1 - include/configs/imx8ulp_evk.h | 107 +++++++++++++++ include/configs/mx28evk.h | 7 - include/configs/mx6cuboxi.h | 5 +- include/dt-bindings/clock/imx8ulp-clock.h | 247 +++++++++++++++++++++++++++++++++++ include/fsl_lpuart.h | 2 +- 128 files changed, 11843 insertions(+), 832 deletions(-) create mode 100644 arch/arm/dts/imx28-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx28-evk.dts create mode 100644 arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mm-venice-gw7902.dts create mode 100644 arch/arm/dts/imx8ulp-evk-u-boot.dtsi create mode 100644 arch/arm/dts/imx8ulp-evk.dts create mode 100644 arch/arm/dts/imx8ulp-pinfunc.h create mode 100644 arch/arm/dts/imx8ulp.dtsi create mode 100644 arch/arm/include/asm/arch-imx8ulp/cgc.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/clock.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/ddr.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/gpio.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/imx-regs.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/imx8ulp-pins.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/iomux.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/mu_hal.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/pcc.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/rdc.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/s400_api.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/sys_proto.h create mode 100644 arch/arm/include/asm/arch-imx8ulp/upower.h rename arch/arm/include/asm/{arch-imx8 => mach-imx}/image.h (95%) rename arch/arm/mach-imx/{imx8/image.c => image-container.c} (79%) create mode 100644 arch/arm/mach-imx/imx8ulp/Kconfig create mode 100644 arch/arm/mach-imx/imx8ulp/Makefile create mode 100644 arch/arm/mach-imx/imx8ulp/cgc.c create mode 100644 arch/arm/mach-imx/imx8ulp/clock.c create mode 100644 arch/arm/mach-imx/imx8ulp/iomux.c create mode 100644 arch/arm/mach-imx/imx8ulp/lowlevel_init.S create mode 100644 arch/arm/mach-imx/imx8ulp/pcc.c create mode 100644 arch/arm/mach-imx/imx8ulp/rdc.c create mode 100644 arch/arm/mach-imx/imx8ulp/soc.c create mode 100644 arch/arm/mach-imx/imx8ulp/upower/Makefile create mode 100644 arch/arm/mach-imx/imx8ulp/upower/upower_api.c create mode 100644 arch/arm/mach-imx/imx8ulp/upower/upower_api.h create mode 100644 arch/arm/mach-imx/imx8ulp/upower/upower_hal.c rename arch/arm/mach-imx/{imx8 => }/parse-container.c (98%) create mode 100644 board/freescale/imx8ulp_evk/Kconfig create mode 100644 board/freescale/imx8ulp_evk/MAINTAINERS create mode 100644 board/freescale/imx8ulp_evk/Makefile create mode 100644 board/freescale/imx8ulp_evk/ddr_init.c create mode 100644 board/freescale/imx8ulp_evk/imx8ulp_evk.c create mode 100644 board/freescale/imx8ulp_evk/lpddr4_timing.c create mode 100644 board/freescale/imx8ulp_evk/spl.c create mode 100644 configs/imx8ulp_evk_defconfig create mode 100644 drivers/ddr/imx/imx8ulp/Kconfig create mode 100644 drivers/ddr/imx/imx8ulp/Makefile create mode 100644 drivers/ddr/imx/imx8ulp/ddr_init.c create mode 100644 drivers/misc/imx8ulp/Makefile create mode 100644 drivers/misc/imx8ulp/fuse.c create mode 100644 drivers/misc/imx8ulp/imx8ulp_mu.c create mode 100644 drivers/misc/imx8ulp/s400_api.c create mode 100644 drivers/pinctrl/nxp/pinctrl-imx8ulp.c create mode 100644 include/configs/imx8ulp_evk.h create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

Please pull u-boot-dm
by Simon Glass 09 Aug '21

09 Aug '21

Hi Tom, https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/8631 The following changes since commit 8f07f5376a21a57ce191e5548b1a30c9709994d3: Merge tag 'video-2021-08-05' of https://source.denx.de/u-boot/custodians/u-boot-video (2021-08-06 13:46:40 -0400) are available in the Git repository at: git://git.denx.de/u-boot-dm.git tags/dm-pull-8aug21 for you to fetch changes up to e679f39f7fc3eb083b2f957d748f81bbdc28f28c: dtoc: Correct the intarray-widening test case (2021-08-08 11:27:27 -0600) ---------------------------------------------------------------- Use log subsystem for dm_warn() Various minor bug fixes ---------------------------------------------------------------- Patrick Delaunay (1): dm: migrate the dm_warn to use the log macro Simon Glass (3): dm: core: Don't allow uclass use before ready patman: Avoid blank lines between tags dtoc: Correct the intarray-widening test case drivers/core/uclass.c | 3 +++ drivers/core/util.c | 11 ----------- include/dm/uclass.h | 3 ++- include/dm/util.h | 2 +- test/dm/core.c | 1 + tools/dtoc/test_fdt.py | 2 +- tools/patman/func_test.py | 23 ++++++++++++++++++++++- tools/patman/patchstream.py | 7 ++++++- 8 files changed, 36 insertions(+), 16 deletions(-) Regards, Simon

2 1