November 2021 - U-Boot

[RFC PATCH v2 0/6] image: add a stage pre-load
by Philippe Reynes 12 Nov '21

12 Nov '21

This serie adds a stage pre-load before launching an image. This stage is used to read a header before the image and this header contains the signature of the full image. So u-boot may check the full image before using any data of the image. Changelog: v2: - move the code to image-pre-load - add support of stage pre-load for spl - add support of stage pre-load on spl_ram Philippe Reynes (6): lib: allow to build asn1 decoder and oid registry in SPL lib: crypto: allow to build crypyo in SPL lib: rsa: allow rsa verify with pkey in SPL common: image: add a stage pre-load cmd: bootm: add a stage pre-load common: spl: fit_ram: allow to use image pre load cmd/Kconfig | 9 ++ cmd/bootm.c | 2 +- common/Kconfig.boot | 33 +++++ common/Makefile | 1 + common/bootm.c | 33 +++++ common/image-pre-load.c | 291 ++++++++++++++++++++++++++++++++++++++++ common/spl/spl_ram.c | 21 ++- include/image.h | 10 ++ lib/Kconfig | 6 + lib/Makefile | 9 +- lib/crypto/Kconfig | 15 +++ lib/crypto/Makefile | 19 ++- lib/rsa/Kconfig | 8 ++ 13 files changed, 446 insertions(+), 11 deletions(-) create mode 100644 common/image-pre-load.c -- 2.17.1

1 6

[RFC 0/3] efi_loader: bootmgr itself should support removable media
by AKASHI Takahiro 12 Nov '21

12 Nov '21

# This task is a bit motivated by Simon's discussion about bootflow[1]. Booting UEFI system from removable media is currently supported by distro_bootcmd script. But the behavior should be best implemented in UEFI Boot Manager. (Historically, the boot manager was added later than the support for removable media boot. So it is a matter of integration.) Here, "removable media" support means: 3.5.1.1 Removable Media Boot Behavior To generate a file name when none is present in the FilePath, the firmware must append a default file name in the form \EFI\BOOT\BOOT{machine type short-name}.EFI where machine type short-name defines a PE32+ image format architecture. With this patch set applied, the boot media order can also be defined by "BooOrder" variable, which the UEFI specification expects. You can find an example command usage in patch#3. Please note that this ehnancement improves the compliance to the specification and that it won't hurt any backward compatibility, if you don't want to use this feature, as long as a removable-related script in distro_bootcmd remains unchanged. The restriction (or drawback?) here is that we need to run all the "scan" commands before invoking the boot manager. [1] https://lists.denx.de/pipermail/u-boot/2021-August/458384.html RFC (Nov 09, 2021) * initial proposal AKASHI Takahiro (3): efi_loader: export efi_locate_device_handle() efi_loader: bootmgr: add booting from removable media cmd: efidebug: handle booting from removable media cmd/efidebug.c | 46 +++++++++++++++++++++---- include/efi_loader.h | 4 +++ lib/efi_loader/efi_bootmgr.c | 65 ++++++++++++++++++++++++++++++++++- lib/efi_loader/efi_boottime.c | 7 ++-- 4 files changed, 111 insertions(+), 11 deletions(-) -- 2.33.0

3 12

pull request of u-boot-fsl-qoriq for v2022.01
by Priyanka Jain 11 Nov '21

11 Nov '21

Dear Tom, Please find my pull-request for u-boot-fsl-qoriq/master https://github.com/u-boot/u-boot/pull/99 Summary fsl-qoriq: device-tree sync-up with Linux for ls1028a fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci enable EFI_SET_TIME support in sl28 powerpc: Drop -mstring Regards Priyanka ------------ The following changes since commit f8ed9059001d803b0eae4b49178789aa0e29edec: Merge tag 'efi-2022-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi (2021-11-07 23:00:29 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git HEAD for you to fetch changes up to 99e1fa89f1a6ce13787af34cbd933c846bc7e93a: configs: ls1028a: ensure Ethernet is enabled (2021-11-09 17:18:23 +0530) ---------------------------------------------------------------- Alban Bedel (1): armv8: fsl-layerscape: Erratum A010315 needs PCIE support Cosmin-Florin Aluchenesei (1): drivers: net: fsl-mc: add a command which dumps the MC log Frieder Schrempf (1): doc: board: kontron: sl28: Reduce section levels and change title Hou Zhiqiang (1): pci: layerscape: Fix the LUT and msi-map mismatch issue Kshitiz Varshney (1): board: fsl_validate: Fix Double free Issue Kuldeep Singh (4): configs: lx2162a: Enable CONFIG_SPI_FLASH_MT35XU for lx2162a-qds arm: dts: ls1088a: Update qspi node properties configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigs configs: ls1046aqds: Configure environment related configs Maninder Singh (1): drivers: ddr: lc_common_dimm_params.c : Fix Divison by zero issue Meenakshi Aggarwal (1): lx2162a : Rename emmc boot command variable Michael Walle (43): board: sl28: enable EFI_SET_TIME support board: sl28: generate FIT update image board: sl28: enable EFI UpdateCapsule support board: sl28: add update image documentation armv8: ls1028a: use the official compatible string for the GPU arm: dts: ls1028a: remove /memory node arm: dts: ls1028a-{rdb, qds}: remove dm-pre-reloc property arm: dts: ls1028a: add an empty /soc arm: dts: ls1028a: move the clockgen node into /soc arm: dts: ls1028a: move I2C controller nodes into /soc arm: dts: ls1028a: move the FlexSPI controller node arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc arm: dts: ls1028a: move the UART controller nodes into /soc arm: dts: ls1028a: move the low-power UART nodes into /soc arm: dts: ls1028a: move the GPIO controller nodes into /soc arm: dts: ls1028a: move SATA and USB controller nodes into /soc arm: dts: ls1028a: move the PCIe controller nodes into /soc arm: dts: ls1028a: move the watchdog node into /soc arm: dts: ls1028a: move the iRC node and its devices into /soc arm: dts: ls1028a: update the labels watchdog: sp805_wdt: use correct compatible string spi: fsl_dspi: add new compatible fsl, ls1021a-v1.0-dspi spi: fsl_dspi: rename num-cs to spi-num-chipselects serial: lpuart: add new compatible fsl, ls1028a-lpuart scsi: ceva: rename the resource name to match the linux kernel one usb: xhci: fsl: add new compatible fsl,ls1028a-dwc3 pci: layerscape: add official ls1028a binding support arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes arm: dts: ls1028a: move the PCI I/O window to match arm: dts: ls1028a: disable the PCIe controller by default arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux arm: dts: sl28: sync dtbs dm: core: add ofnode_for_each_compatible_node() test: dm: add test for ofnode_for_each_compatible_node() armv8: fsl-layerscape: rework the dwc3 snooping enable code usb: common: silence dubious errors usb: dwc3: Add frame length adjustment quirk usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add layerscape support board: sl28: switch to dwc3 driver board: sl28: enable USB periheral support and gadgets armv8: layerscape: use memalign() to allocate spintable code board: kontron: sl28: add myself to ls1028a.dtsi maintainers Priyanka Singh (4): drivers: ddr: util.c: Fix divide by zero issue drivers: ddr: fsl_ddr_gen4.c: Fix divide by zero issue drivers: ddr: main.c: Fix Bad Shift operator issue board: freescale: t104xrdb: Set popts->cpo_sample to 0x54 for DDR3 Rajesh Bhagat (1): configs: fsl: migrate FMAN/QE specific defines to Kconfig Tom Rini (1): ppc: mpc8xx: Drop -mstring from PLATFORM_CPPFLAGS Vladimir Oltean (1): configs: ls1028a: ensure Ethernet is enabled Wasim Khan (1): board: freescale: lx216x : increase fdt blob size arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 +- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/mp.c | 29 +- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 28 +- arch/arm/dts/fsl-ls1012a.dtsi | 4 +- arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 72 +- .../dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi | 2 +- arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 31 +- .../dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi | 8 + arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 46 +- .../dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi | 2 +- .../dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi | 4 +- arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 18 +- arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 256 +++- arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 4 +- arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi | 4 +- arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 8 +- arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 4 +- .../dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-duart.dts | 2 +- .../dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 12 +- .../dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 6 +- arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 6 +- arch/arm/dts/fsl-ls1028a-qds.dtsi | 25 +- arch/arm/dts/fsl-ls1028a-rdb.dts | 31 +- arch/arm/dts/fsl-ls1028a.dtsi | 1443 ++++++++++++++------ arch/arm/dts/fsl-ls1043a.dtsi | 6 +- arch/arm/dts/fsl-ls1046a.dtsi | 6 +- arch/arm/dts/fsl-ls1088a.dtsi | 6 +- arch/arm/dts/fsl-ls2080a.dtsi | 2 +- arch/arm/dts/fsl-lx2160a.dtsi | 6 +- arch/arm/dts/hi3660.dtsi | 4 +- arch/arm/dts/ls1021a.dtsi | 6 +- arch/arm/dts/vf.dtsi | 4 +- arch/powerpc/cpu/mpc8xx/config.mk | 2 +- board/freescale/common/fsl_validate.c | 28 +- board/freescale/lx2160a/lx2160a.c | 8 + board/freescale/t104xrdb/ddr.c | 2 + board/kontron/sl28/MAINTAINERS | 1 + configs/P2041RDB_NAND_defconfig | 1 + configs/P2041RDB_SDCARD_defconfig | 1 + configs/P2041RDB_SPIFLASH_defconfig | 1 + configs/P2041RDB_defconfig | 1 + configs/P3041DS_NAND_defconfig | 1 + configs/P3041DS_SDCARD_defconfig | 1 + configs/P3041DS_SPIFLASH_defconfig | 1 + configs/P3041DS_defconfig | 1 + configs/P4080DS_SDCARD_defconfig | 1 + configs/P4080DS_SPIFLASH_defconfig | 1 + configs/P4080DS_defconfig | 1 + configs/P5040DS_NAND_defconfig | 1 + configs/P5040DS_SDCARD_defconfig | 1 + configs/P5040DS_SPIFLASH_defconfig | 1 + configs/P5040DS_defconfig | 1 + configs/T1024RDB_NAND_defconfig | 2 + configs/T1024RDB_SDCARD_defconfig | 2 + configs/T1024RDB_SPIFLASH_defconfig | 2 + configs/T1024RDB_defconfig | 2 + configs/T1042D4RDB_NAND_defconfig | 2 + configs/T1042D4RDB_SDCARD_defconfig | 2 + configs/T1042D4RDB_SPIFLASH_defconfig | 2 + configs/T1042D4RDB_defconfig | 2 + configs/T2080QDS_NAND_defconfig | 1 + configs/T2080QDS_SDCARD_defconfig | 1 + configs/T2080QDS_SECURE_BOOT_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 1 + configs/T2080QDS_defconfig | 1 + configs/T2080RDB_NAND_defconfig | 1 + configs/T2080RDB_SDCARD_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2080RDB_defconfig | 1 + configs/T2080RDB_revD_NAND_defconfig | 1 + configs/T2080RDB_revD_SDCARD_defconfig | 1 + configs/T2080RDB_revD_SPIFLASH_defconfig | 1 + configs/T2080RDB_revD_defconfig | 1 + configs/T4240RDB_SDCARD_defconfig | 1 + configs/T4240RDB_defconfig | 1 + configs/kmcent2_defconfig | 2 + configs/kmtegr1_defconfig | 1 + configs/kontron_sl28_defconfig | 17 +- configs/ls1021aiot_qspi_defconfig | 1 + configs/ls1021aiot_sdcard_defconfig | 1 + configs/ls1021aqds_ddr4_nor_defconfig | 1 + configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021aqds_nor_defconfig | 1 + configs/ls1021aqds_nor_lpuart_defconfig | 1 + configs/ls1021aqds_qspi_defconfig | 1 + configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_nor_defconfig | 1 + configs/ls1021atwr_nor_lpuart_defconfig | 1 + configs/ls1021atwr_qspi_defconfig | 1 + .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_defconfig | 1 + configs/ls1021atwr_sdcard_qspi_defconfig | 1 + configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028aqds_tfa_defconfig | 1 + configs/ls1028aqds_tfa_lpuart_defconfig | 1 + configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 + configs/ls1043aqds_defconfig | 2 + configs/ls1043aqds_lpuart_defconfig | 2 + configs/ls1043aqds_nand_defconfig | 1 + configs/ls1043aqds_nor_ddr3_defconfig | 2 + configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_sdcard_ifc_defconfig | 2 + configs/ls1043aqds_sdcard_qspi_defconfig | 2 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 2 + configs/ls1043aqds_tfa_defconfig | 2 + configs/ls1043ardb_SECURE_BOOT_defconfig | 2 + configs/ls1043ardb_defconfig | 2 + configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 1 + configs/ls1043ardb_nand_defconfig | 1 + configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 2 + configs/ls1043ardb_sdcard_defconfig | 2 + configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 2 + configs/ls1043ardb_tfa_defconfig | 2 + configs/ls1046aqds_SECURE_BOOT_defconfig | 4 + configs/ls1046aqds_defconfig | 4 + configs/ls1046aqds_lpuart_defconfig | 4 + configs/ls1046aqds_nand_defconfig | 4 + configs/ls1046aqds_qspi_defconfig | 4 + configs/ls1046aqds_sdcard_ifc_defconfig | 4 + configs/ls1046aqds_sdcard_qspi_defconfig | 4 + configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 4 + configs/ls1046aqds_tfa_defconfig | 9 +- configs/ls1046ardb_emmc_defconfig | 1 + configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_qspi_defconfig | 1 + configs/ls1046ardb_qspi_spl_defconfig | 1 + configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_sdcard_defconfig | 1 + configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1046ardb_tfa_defconfig | 1 + configs/lx2162aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/lx2162aqds_tfa_defconfig | 1 + configs/lx2162aqds_tfa_verified_boot_defconfig | 1 + configs/pg_wcom_expu1_defconfig | 1 + configs/pg_wcom_seli8_defconfig | 1 + doc/board/kontron/sl28.rst | 45 +- drivers/ata/sata_ceva.c | 2 +- drivers/crypto/fsl/fsl_hash.c | 14 +- drivers/ddr/fsl/fsl_ddr_gen4.c | 14 +- drivers/ddr/fsl/lc_common_dimm_params.c | 10 +- drivers/ddr/fsl/main.c | 11 +- drivers/ddr/fsl/util.c | 12 +- drivers/net/Kconfig | 10 + drivers/net/fsl-mc/mc.c | 89 +- drivers/pci/pcie_layerscape_fixup.c | 8 +- drivers/pci/pcie_layerscape_fixup_common.c | 6 +- drivers/pci/pcie_layerscape_gen4.c | 4 +- drivers/pci/pcie_layerscape_gen4_fixup.c | 5 +- drivers/pci/pcie_layerscape_rc.c | 64 +- drivers/qe/Kconfig | 4 + drivers/serial/serial_lpuart.c | 2 + drivers/spi/fsl_dspi.c | 6 +- drivers/usb/common/common.c | 4 +- drivers/usb/dwc3/Kconfig | 10 + drivers/usb/dwc3/Makefile | 1 + drivers/usb/dwc3/core.c | 95 ++ drivers/usb/dwc3/core.h | 22 + drivers/usb/dwc3/dwc3-layerscape.c | 222 +++ drivers/usb/host/xhci-fsl.c | 1 + drivers/watchdog/sp805_wdt.c | 2 +- include/configs/P2041RDB.h | 31 +- include/configs/T102xRDB.h | 32 +- include/configs/T104xRDB.h | 29 +- include/configs/T208xQDS.h | 27 - include/configs/T208xRDB.h | 29 - include/configs/T4240RDB.h | 18 - include/configs/corenet_ds.h | 31 +- include/configs/km/km-mpc8309.h | 3 - include/configs/km/pg-wcom-ls102xa.h | 1 - include/configs/kmcent2.h | 4 - include/configs/kontron_sl28.h | 2 + include/configs/ls1012a_common.h | 4 - include/configs/ls1021aiot.h | 2 - include/configs/ls1021aqds.h | 3 - include/configs/ls1021atwr.h | 2 - include/configs/ls1043a_common.h | 23 - include/configs/ls1046a_common.h | 20 - include/configs/ls1046aqds.h | 7 - include/configs/lx2162aqds.h | 4 +- include/configs/p1_p2_rdb_pc.h | 6 - include/dm/ofnode.h | 24 + include/dt-bindings/clock/fsl,qoriq-clockgen.h | 15 + include/fsl-mc/fsl_mc.h | 9 + scripts/config_whitelist.txt | 3 - test/dm/ofnode.c | 18 + 197 files changed, 2383 insertions(+), 983 deletions(-) create mode 100644 drivers/usb/dwc3/dwc3-layerscape.c create mode 100644 include/dt-bindings/clock/fsl,qoriq-clockgen.h

2 1

[u-boot-test-hooks PATCH 1/7] travis-ci: Add qemu_arm_spl board
by Simon Glass 11 Nov '21

11 Nov '21

From: Tuomas Tynkkynen <tuomas.tynkkynen(a)iki.fi> This is similar to the existing qemu_arm target, except that the 'bios' is image.bin (containing both SPL and U-Boot) rather than in u-boot.bin Signed-off-by: Simon Glass <sjg(a)chromium.org> --- bin/travis-ci/conf.qemu_arm_spl_na | 31 ++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 bin/travis-ci/conf.qemu_arm_spl_na diff --git a/bin/travis-ci/conf.qemu_arm_spl_na b/bin/travis-ci/conf.qemu_arm_spl_na new file mode 100644 index 0000000..18c7fe5 --- /dev/null +++ b/bin/travis-ci/conf.qemu_arm_spl_na @@ -0,0 +1,31 @@ +# Copyright 2021 Google LLC +# Based on conf.vexpress_ca15_tc2_qemu which is: +# Copyright (c) 2016 Konsulko Group. All rights reserved. +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the "Software"), +# to deal in the Software without restriction, including without limitation +# the rights to use, copy, modify, merge, publish, distribute, sublicense, +# and/or sell copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +# DEALINGS IN THE SOFTWARE. + +console_impl=qemu +qemu_machine="virt" +qemu_binary="qemu-system-arm" +qemu_extra_args="-nographic -netdev user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR} -device e1000,netdev=net0 -device virtio-rng-pci" + +# Uses image.bin which contains SPL and U-Boot +qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/image.bin" +reset_impl=none +flash_impl=none -- 2.33.1.1089.g2158813163f-goog

3 16

[v2, PATCH] lib: sparse: Make CHUNK_TYPE_RAW buffer aligned
by qianfanguijin＠qq.com 11 Nov '21

11 Nov '21

From: qianfan Zhao <qianfanguijin(a)163.com> CHUNK_TYPE_RAW buffer is not aligned, and flash sparse images by fastboot will report "Misaligned operation" if DCACHE is enabled. Flashing Sparse Image CACHE: Misaligned operation at range [84000028, 84001028] CACHE: Misaligned operation at range [84001034, 84002034] CACHE: Misaligned operation at range [8401104c, 8401304c] Fix it Signed-off-by: qianfan Zhao <qianfanguijin(a)163.com> --- lib/image-sparse.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/lib/image-sparse.c b/lib/image-sparse.c index d80fdbbf58..07aa3dd6ba 100644 --- a/lib/image-sparse.c +++ b/lib/image-sparse.c @@ -49,6 +49,41 @@ static void default_log(const char *ignored, char *response) {} +static lbaint_t write_sparse_chunk_raw(struct sparse_storage *info, + lbaint_t blk, lbaint_t blkcnt, + void *data, + char *response) +{ + lbaint_t n, write_blks, blks = 0, aligned_buf_blks = 100; + uint32_t *aligned_buf = NULL; + + if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return info->write(info, blk, blkcnt, data); + + aligned_buf = memalign(ARCH_DMA_MINALIGN, info->blksz * aligned_buf_blks); + if (!aligned_buf) { + info->mssg("Malloc failed for: CHUNK_TYPE_RAW", response); + return -ENOMEM; + } + + while (blkcnt > 0) { + n = min(aligned_buf_blks, blkcnt); + memcpy(aligned_buf, data, n * info->blksz); + + /* write_blks might be > n due to NAND bad-blocks */ + write_blks = info->write(info, blk + blks, n, aligned_buf); + blks += write_blks; + if (write_blks < n) + break; + + data += n * info->blksz; + blkcnt -= n; + } + + free(aligned_buf); + return blks; +} + int write_sparse_image(struct sparse_storage *info, const char *part_name, void *data, char *response) { @@ -152,7 +187,9 @@ int write_sparse_image(struct sparse_storage *info, return -1; } - blks = info->write(info, blk, blkcnt, data); + blks = write_sparse_chunk_raw(info, blk, blkcnt, + data, response); + /* blks might be > blkcnt (eg. NAND bad-blocks) */ if (blks < blkcnt) { printf("%s: %s" LBAFU " [" LBAFU "]\n", -- 2.17.1

2 1

[RFC 0/2] Do not stop with an error when mkimage fails
by Heiko Thiery 11 Nov '21

11 Nov '21

While converting to binman for an imx8mq board, it has been found that building in the u-boot CI fails. This is because an imx8mq requires an external binary (signed_hdmi_imx8m.bin). If this file cannot be found mkimage fails. To work around the problem the exception is caught, an error message is printed and binman continues. Heiko Thiery (2): patman: introduce RunException binman: catch RunException for mkimage runtime failure tools/binman/etype/mkimage.py | 8 +++++++- tools/patman/tools.py | 16 +++++++++++++--- 2 files changed, 20 insertions(+), 4 deletions(-) -- 2.30.2

6 22

[PATCH v2 0/2] board: sifive: unmatched: use zero copy for initrd
by Heinrich Schuchardt 11 Nov '21

11 Nov '21

Booting Ubuntu Impish showed the following output: relocaddr = 0x00000000fff60000 Loading Ramdisk to fa118000, end fffff19d ... The initrd is overwriting the U-Boot binary. Booting fails. There is no need to copy the initrd from $ramdisk_addr_r. Set init_high = ~0UL to use zero copy. Do the same for the device tree. Rearrange all load addresses: * put the small files below $kernel_addr_r to not limit the kernel size. * ramdisk_addr_r should be the highest of all loading addresses to avoid limiting the size of the initial RAM disk. v2: rearrange all more addresses Heinrich Schuchardt (2): board: sifive: unmatched: use zero copy for initrd board: sifive: unmatched: rearrange load addresses include/configs/sifive-unmatched.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) -- 2.32.0

3 12

[PATCH 0/2] RFC: add fdt_add_pubkey tool
by Roman Kopytin 11 Nov '21

11 Nov '21

In order to reduce the coupling between building the kernel and U-Boot, I'd like a tool that can add a public key to U-Boot's dtb without simultaneously signing a FIT image. That tool doesn't seem to exist, so I stole the necessary pieces from mkimage et al and put it in a single .c file. I'm still working on the details of my proposed "require just k out these n required keys" and how it should be implemented, but it will probably involve teaching this tool a bunch of new options. These patches are not necessarily ready for inclusion (unless someone else finds fdt_add_pubkey useful as is), but I thought I might as well send it out for early comments. Roman Kopytin (2): tools: add fdt_add_pubkey test_vboot.py: include test of fdt_add_pubkey tool test/py/tests/test_vboot.py | 8 +++ tools/.gitignore | 1 + tools/Makefile | 3 + tools/fdt_add_pubkey.c | 130 ++++++++++++++++++++++++++++++++++++ 4 files changed, 142 insertions(+) create mode 100644 tools/fdt_add_pubkey.c -- 2.25.1

1 2

[PATCH 0/2] RFC: add fdt_add_pubkey tool
by Roman Kopytin 11 Nov '21

11 Nov '21

In order to reduce the coupling between building the kernel and U-Boot, I'd like a tool that can add a public key to U-Boot's dtb without simultaneously signing a FIT image. That tool doesn't seem to exist, so I stole the necessary pieces from mkimage et al and put it in a single .c file. I'm still working on the details of my proposed "require just k out these n required keys" and how it should be implemented, but it will probably involve teaching this tool a bunch of new options. These patches are not necessarily ready for inclusion (unless someone else finds fdt_add_pubkey useful as is), but I thought I might as well send it out for early comments. Roman Kopytin (2): tools: add fdt_add_pubkey test_vboot.py: include test of fdt_add_pubkey tool test/py/tests/test_vboot.py | 8 +++ tools/.gitignore | 1 + tools/Makefile | 3 ++ tools/fdt_add_pubkey.c | 97 +++++++++++++++++++++++++++++++++++++ 4 files changed, 109 insertions(+) create mode 100755 tools/fdt_add_pubkey.c -- 2.25.1

4 41

[PATCH v5 00/28] arm: dts: ls1028a: sync device tree with linux
by Michael Walle 11 Nov '21

11 Nov '21

This series sync the device tree of the LS1028A SoC with the linux one. To ease future debugging and reviewing, we first clean up the existing one, removing bogus nodes, moving all CCSR related nodes in /soc and update the drivers to accept the offical compatible strings. This was tested on a sl28 board, but the ls1028a.dtsi sync also affects the LS1028A-RDB and -QDS. It would be nice if someone could actually test it on such a board. I didn't sync the device trees for the NXP boards because u-boot related things aren't split into its own -u-boot.dtsi file. So I'll leave that task to NXP :) The following patch is a prerequisite for this series: https://patchwork.ozlabs.org/project/uboot/patch/20210825210510.24766-1-tri… changes since v4: - drop the following patch which isn't needed anymore, because it was fixed in the linux dtsi: arm: dts: ls1028a: drop non-removable property from esdhc controller - sync dtsi with linux 5.14.12 changes since v3: - rebase to latest master - don't support fsl,ls1028a-gpu anymore, use the upstream compatible string changes since v2: - move the device tree nodes piece by piece and sort them to ease reviewing - fix PCI driver (bindings) - fix SATA driver (bindings) - fix USB driver (bindings) - split most changes which are caused by the sync of the linux device tree to own patches, eg. pcie io window, spi chip selects The final diff for the sync is much nicer now ;) changes since v1: - remove u-boot,dm-pre-reloc from rdb and qds boards - fix enetc0 and enetc2 labels Michael Walle (28): armv8: ls1028a: use the official compatible string for the GPU arm: dts: ls1028a: remove /memory node arm: dts: ls1028a-{rdb,qds}: remove dm-pre-reloc property arm: dts: ls1028a: add an empty /soc arm: dts: ls1028a: move the clockgen node into /soc arm: dts: ls1028a: move I2C controller nodes into /soc arm: dts: ls1028a: move the FlexSPI controller node arm: dts: ls1028a: move the SPI and eSDHC controller nodes into /soc arm: dts: ls1028a: move the UART controller nodes into /soc arm: dts: ls1028a: move the low-power UART nodes into /soc arm: dts: ls1028a: move the GPIO controller nodes into /soc arm: dts: ls1028a: move SATA and USB controller nodes into /soc arm: dts: ls1028a: move the PCIe controller nodes into /soc arm: dts: ls1028a: move the watchdog node into /soc arm: dts: ls1028a: move the iRC node and its devices into /soc arm: dts: ls1028a: update the labels watchdog: sp805_wdt: use correct compatible string spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi spi: fsl_dspi: rename num-cs to spi-num-chipselects serial: lpuart: add new compatible fsl,ls1028a-lpuart scsi: ceva: rename the resource name to match the linux kernel one usb: xhci: fsl: add new compatible fsl,ls1028a-dwc3 pci: layerscape: add official ls1028a binding support arm: dts: ls1028a: remove num-lanes in the PCIe controller nodes arm: dts: ls1028a: move the PCI I/O window to match arm: dts: ls1028a: disable the PCIe controller by default arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux arm: dts: sl28: sync dtbs arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- .../arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 2 +- arch/arm/dts/fsl-ls1012a.dtsi | 4 +- .../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 37 +- .../fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi | 2 +- .../arm/dts/fsl-ls1028a-kontron-sl28-var1.dts | 31 +- .../fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi | 8 + .../arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 46 +- .../fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi | 2 +- .../fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi | 4 +- .../arm/dts/fsl-ls1028a-kontron-sl28-var4.dts | 18 +- arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 256 ++- .../dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 4 +- .../dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi | 4 +- .../dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 12 +- .../dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 8 +- .../dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 4 +- .../fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 12 +- .../dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 12 +- arch/arm/dts/fsl-ls1028a-qds-duart.dts | 2 +- .../fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 12 +- .../fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 12 +- .../dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 6 +- .../dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 6 +- arch/arm/dts/fsl-ls1028a-qds.dtsi | 25 +- arch/arm/dts/fsl-ls1028a-rdb.dts | 31 +- arch/arm/dts/fsl-ls1028a.dtsi | 1443 ++++++++++++----- arch/arm/dts/fsl-ls1043a.dtsi | 6 +- arch/arm/dts/fsl-ls1046a.dtsi | 6 +- arch/arm/dts/fsl-ls1088a.dtsi | 4 +- arch/arm/dts/fsl-ls2080a.dtsi | 2 +- arch/arm/dts/fsl-lx2160a.dtsi | 6 +- arch/arm/dts/hi3660.dtsi | 4 +- arch/arm/dts/ls1021a.dtsi | 6 +- arch/arm/dts/vf.dtsi | 4 +- drivers/ata/sata_ceva.c | 2 +- drivers/pci/pcie_layerscape_rc.c | 61 +- drivers/serial/serial_lpuart.c | 2 + drivers/spi/fsl_dspi.c | 6 +- drivers/usb/host/xhci-fsl.c | 1 + drivers/watchdog/sp805_wdt.c | 2 +- .../dt-bindings/clock/fsl,qoriq-clockgen.h | 15 + 42 files changed, 1530 insertions(+), 602 deletions(-) create mode 100644 include/dt-bindings/clock/fsl,qoriq-clockgen.h -- 2.30.2

4 32