October 2021 - U-Boot

[PATCH v3 1/3] dm: core: Bind another driver with the same compatible string
by Michal Simek 15 Oct '21

15 Oct '21

When one IP can have multiple configurations (like timer and PWM) covered by multiple drivers. Because it is the same IP it should also have the same compatible string. Current code look for the first driver which matches compatible string and call bind function. If this is not the right driver which is express by returning -ENODEV ("Driver XYZ refuses to bind") there is no reason not to continue over compatible list to try to find out different driver with the same compatible string which match it. When the first compatible string is found core looks for driver bind() function. If if assigned driver refuse to bind, core continue in a loop to check if there is another driver which match compatible string. This driver is going to be used with cdnc,ttc driver which has driver as timer and also can be used as PWM. The difference is done via #pwm-cells property in DT. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- Changes in v3: - New patch in series drivers/core/lists.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/core/lists.c b/drivers/core/lists.c index 350b9d32687c..199ee3a8e0fc 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -221,12 +221,14 @@ int lists_bind_fdt(struct udevice *parent, ofnode node, struct udevice **devp, compat = compat_list + i; log_debug(" - attempt to match compatible string '%s'\n", compat); - - for (entry = driver; entry != driver + n_ents; entry++) { + entry = driver; +next: + for (; entry != driver + n_ents; entry++) { ret = driver_check_compatible(entry->of_match, &id, compat); if (!ret) break; + } if (entry == driver + n_ents) continue; @@ -246,7 +248,8 @@ int lists_bind_fdt(struct udevice *parent, ofnode node, struct udevice **devp, id->data, node, &dev); if (ret == -ENODEV) { log_debug("Driver '%s' refuses to bind\n", entry->name); - continue; + entry++; + goto next; } if (ret) { dm_warn("Error binding driver '%s': %d\n", entry->name, -- 2.33.0

3 10

[PATCH 1/1] rockchip: px30: add support for HW RNG for Odroid Go Advance
by Chris Morgan 15 Oct '21

15 Oct '21

From: Chris Morgan <macromorgan(a)hotmail.com> The Odroid Go Advance has a hardware random number generator present. The device does not have an upstream Linux driver, but does have a U-Boot driver. Add the appropriate node so that the hardware RNG can be used in U-Boot. Signed-off-by: Chris Morgan <macromorgan(a)hotmail.com> --- arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi index 741e8dd935..6d4edc5855 100644 --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -16,6 +16,12 @@ serial2 = &uart2; spi0 = &sfc; }; + + rng: rng@ff0b0000 { + compatible = "rockchip,cryptov2-rng"; + reg = <0x0 0xff0b0000 0x0 0x4000>; + status = "okay"; + }; }; &cru { -- 2.25.1

2 1

[PATCH] rockchip: px30: sync serial flash controller bindings with mainline
by Chris Morgan 15 Oct '21

15 Oct '21

From: Chris Morgan <macromorgan(a)hotmail.com> The devicetree submitted and approved for the mainline linux kernel is slightly different than the one present here. This syncs both devicetrees (for the Rockchip SFC node at least) present on the PX30 and the Odroid Go Advance. Changes include renaming the flash node, reordering the values in the SFC node for the rk3326-odroid-go2, changing the name of the cs pinctrl node to cs0, and updating the u-boot specific tree to utilize the new flash node value. Signed-off-by: Chris Morgan <macromorgan(a)hotmail.com> --- arch/arm/dts/px30.dtsi | 4 ++-- arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 2 +- arch/arm/dts/rk3326-odroid-go2.dts | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi index aaa8ae2235..ef706486dc 100644 --- a/arch/arm/dts/px30.dtsi +++ b/arch/arm/dts/px30.dtsi @@ -967,7 +967,7 @@ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; clock-names = "clk_sfc", "hclk_sfc"; pinctrl-names = "default"; - pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus4>; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; @@ -1953,7 +1953,7 @@ <1 RK_PA1 3 &pcfg_pull_none>; }; - sfc_cs: sfc-cs { + sfc_cs0: sfc-cs0 { rockchip,pins = <1 RK_PA4 3 &pcfg_pull_none>; }; diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi index 741e8dd935..0990005a15 100644 --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -70,7 +70,7 @@ u-boot,dm-pre-reloc; }; -&spi_flash { +&{/sfc@ff3a0000/flash@0} { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts index 6f91f5040b..4e3dceecbe 100644 --- a/arch/arm/dts/rk3326-odroid-go2.dts +++ b/arch/arm/dts/rk3326-odroid-go2.dts @@ -618,18 +618,18 @@ }; &sfc { + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>; status = "okay"; - spi_flash: xt25f128b@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; spi-rx-bus-width = <2>; - spi-tx-bus-width = <2>; + spi-tx-bus-width = <1>; }; }; -- 2.25.1

2 1

[PATCH 1/2] doc: rockchip: sort rockchip support list for rk3188
by Johan Jonker 15 Oct '21

15 Oct '21

In the list of mainline U-boot supported Rockchip boards rk3188 is placed below under the name rv3188. Give back it's original name and sort the list in alphabetical order. Signed-off-by: Johan Jonker <jbx6244(a)gmail.com> --- doc/board/rockchip/rockchip.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index fbb99839..8d75efc0 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -26,6 +26,8 @@ List of mainline supported rockchip boards: - Kylin (kylin_rk3036) * rk3128 - Rockchip Evb-RK3128 (evb-rk3128) +* rk3188 + - Radxa Rock (rock) * rk3229 - Rockchip Evb-RK3229 (evb-rk3229) * rk3288 @@ -75,8 +77,6 @@ List of mainline supported rockchip boards: * rv1108 - Rockchip Evb-rv1108 (evb-rv1108) - Elgin-R1 (elgin-rv1108) -* rv3188 - - Radxa Rock (rock) Building -------- -- 2.20.1

2 3

[PATCH] rockchip: rk33xx: Drop ROCKCHIP_USB2_PHY on boards without it
by Peter Robinson 15 Oct '21

15 Oct '21

The 64 bit rk33xx chips don't have the ROCKCHIP_USB2_PHY IP so drop the configs as they were likely copied over from other boards during enablement. Signed-off-by: Peter Robinson <pbrobinson(a)gmail.com> --- configs/lion-rk3368_defconfig | 1 - configs/nanopc-t4-rk3399_defconfig | 1 - configs/roc-pc-mezzanine-rk3399_defconfig | 1 - configs/roc-pc-rk3399_defconfig | 1 - configs/rock-pi-n10-rk3399pro_defconfig | 1 - 5 files changed, 5 deletions(-) diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig index 5f7d101814..90a2878e50 100644 --- a/configs/lion-rk3368_defconfig +++ b/configs/lion-rk3368_defconfig @@ -94,7 +94,6 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC2=y -CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_SPL_TINY_MEMSET=y diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig index a94f428def..62833c386b 100644 --- a/configs/nanopc-t4-rk3399_defconfig +++ b/configs/nanopc-t4-rk3399_defconfig @@ -51,7 +51,6 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y -CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index 8d0f57021b..6aa47490c1 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -69,7 +69,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y -CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 4e5c90439d..b03ee3664f 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -66,7 +66,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y -CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig index e5df6779de..17442a0d84 100644 --- a/configs/rock-pi-n10-rk3399pro_defconfig +++ b/configs/rock-pi-n10-rk3399pro_defconfig @@ -60,7 +60,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y -CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y # CONFIG_USB_KEYBOARD_FN_KEYS is not set CONFIG_USB_GADGET=y -- 2.31.1

2 1

[PATCH 0/2] rockchip: board: Fix bug for clk driver for OGA
by Chris Morgan 15 Oct '21

15 Oct '21

From: Chris Morgan <macromorgan(a)hotmail.com> This series is to fix a problem with probing the clk_px30 driver that began with commit 92f1e9a4b31c ("clk: Detect failure to set defaults"). The driver fails to probe because 2 clocks are unsupported. One clock (the cpll) was simple to add to the driver and the other clock (the GPU) is not used in U-Boot so was removed from the U-Boot specific device tree. With these changes the clk driver probes again successfully. Note that without this fix no devices that depend on the clk driver are able to probe as well (such as the SD card, the SPI bus, etc) so the device fails to boot. Chris Morgan (2): rockchip: px30: add support for setting cpll clock rockchip: board: remove SCLK_GPU from U-Boot DT arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++++++ drivers/clk/rockchip/clk_px30.c | 3 +++ 2 files changed, 13 insertions(+) -- 2.25.1

2 4

[PATCH v2] clk: rockchip: rk3568: update clks
by Elaine Zhang 15 Oct '21

15 Oct '21

fix up ppll init freq. support tclk_emmc. add freq (26M) for mmc device. fix up the sfc clk rate unit error. Change in V2: remove change id. Signed-off-by: Elaine Zhang <zhangqing(a)rock-chips.com> --- arch/arm/include/asm/arch-rockchip/cru_rk3568.h | 2 +- drivers/clk/rockchip/clk_rk3568.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h index 6c59033f03a6..399f19ad21ec 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3568.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3568.h @@ -14,7 +14,7 @@ #define APLL_HZ (816 * MHz) #define GPLL_HZ (1188 * MHz) #define CPLL_HZ (1000 * MHz) -#define PPLL_HZ (100 * MHz) +#define PPLL_HZ (200 * MHz) /* RK3568 pll id */ enum rk3568_pll_id { diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c index 553c6c0dafbd..d5e45e7602c7 100644 --- a/drivers/clk/rockchip/clk_rk3568.c +++ b/drivers/clk/rockchip/clk_rk3568.c @@ -1441,6 +1441,7 @@ static ulong rk3568_sdmmc_set_clk(struct rk3568_clk_priv *priv, switch (rate) { case OSC_HZ: + case 26 * MHz: src_clk = CLK_SDMMC_SEL_24M; break; case 400 * MHz: @@ -1507,7 +1508,7 @@ static ulong rk3568_sfc_get_clk(struct rk3568_clk_priv *priv) case SCLK_SFC_SEL_125M: return 125 * MHz; case SCLK_SFC_SEL_150M: - return 150 * KHz; + return 150 * MHz; default: return -ENOENT; } @@ -1534,7 +1535,7 @@ static ulong rk3568_sfc_set_clk(struct rk3568_clk_priv *priv, ulong rate) case 125 * MHz: src_clk = SCLK_SFC_SEL_125M; break; - case 150 * KHz: + case 150 * MHz: src_clk = SCLK_SFC_SEL_150M; break; default: @@ -2406,6 +2407,9 @@ static ulong rk3568_clk_get_rate(struct clk *clk) case BCLK_EMMC: rate = rk3568_emmc_get_bclk(priv); break; + case TCLK_EMMC: + rate = OSC_HZ; + break; #ifndef CONFIG_SPL_BUILD case ACLK_VOP: rate = rk3568_aclk_vop_get_clk(priv); @@ -2582,6 +2586,9 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate) case BCLK_EMMC: ret = rk3568_emmc_set_bclk(priv, rate); break; + case TCLK_EMMC: + ret = OSC_HZ; + break; #ifndef CONFIG_SPL_BUILD case ACLK_VOP: ret = rk3568_aclk_vop_set_clk(priv, rate); -- 2.17.1

2 1

[PATCH] board/km: update MAINTAINERS files
by Holger Brunck 15 Oct '21

15 Oct '21

Update the e-mail addresses and person responsible. Signed-off-by: Holger Brunck <holger.brunck(a)hitachienergy.com> CC: Aleksandar Gerasimovski <aleksandar.gerasimovski(a)hitachienergy.com> CC: Rainer Boschung <rainer.boschung(a)hitachienergy.com> --- board/keymile/km83xx/MAINTAINERS | 2 +- board/keymile/km_arm/MAINTAINERS | 2 +- board/keymile/pg-wcom-ls102xa/MAINTAINERS | 5 ++--- board/keymile/secu1/MAINTAINERS | 2 +- 4 files changed, 5 insertions(+), 6 deletions(-) diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS index 9268719a74..9fd5a8500d 100644 --- a/board/keymile/km83xx/MAINTAINERS +++ b/board/keymile/km83xx/MAINTAINERS @@ -1,5 +1,5 @@ KM83XX BOARD -M: Holger Brunck <holger.brunck(a)hitachi-powergrids.com> +M: Holger Brunck <holger.brunck(a)hitachienergy.com> M: Heiko Schocher <hs(a)denx.de> S: Maintained F: board/keymile/km83xx/ diff --git a/board/keymile/km_arm/MAINTAINERS b/board/keymile/km_arm/MAINTAINERS index 8da58da962..bc6858be13 100644 --- a/board/keymile/km_arm/MAINTAINERS +++ b/board/keymile/km_arm/MAINTAINERS @@ -1,5 +1,5 @@ KM_ARM BOARD -M: Valentin Longchamp <valentin.longchamp(a)hitachi-powergrids.com> +M: Holger Brunck <holger.brunck(a)hitachienergy.com> S: Maintained F: board/keymile/km_arm/ F: include/configs/km_kirkwood.h diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS b/board/keymile/pg-wcom-ls102xa/MAINTAINERS index 26b202316c..966c88b681 100644 --- a/board/keymile/pg-wcom-ls102xa/MAINTAINERS +++ b/board/keymile/pg-wcom-ls102xa/MAINTAINERS @@ -1,7 +1,6 @@ Hitachi Power Grids LS102XA BOARD -M: Aleksandar Gerasimovski <aleksandar.gerasimovski(a)hitachi-powergrids.com> -M: Rainer Boschung <rainer.boschung(a)hitachi-powergrids.com> -M: Matteo Ghidoni <matteo.ghidoni(a)hitachi-powergrids.com> +M: Aleksandar Gerasimovski <aleksandar.gerasimovski(a)hitachienergy.com> +M: Rainer Boschung <rainer.boschung(a)hitachienergy.com> S: Maintained F: board/keymile/pg-wcom-ls102xa/ F: include/configs/km/pg-wcom-ls102xa.h diff --git a/board/keymile/secu1/MAINTAINERS b/board/keymile/secu1/MAINTAINERS index 3e40eef3cc..833b3fdeab 100644 --- a/board/keymile/secu1/MAINTAINERS +++ b/board/keymile/secu1/MAINTAINERS @@ -1,5 +1,5 @@ Hitachi Power Grids SECU1 BOARD -M: Holger Brunck <holger.brunck(a)hitachi-powergrids.com> +M: Holger Brunck <holger.brunck(a)hitachienergy.com> S: Maintained F: include/configs/socfpga_arria5_secu1.h F: configs/socfpga_secu1_defconfig -- 2.31.0

2 1

[PATCH v2] pytest: Show a message when sandbox crashes
by Simon Glass 15 Oct '21

15 Oct '21

When a test hands on a real board there is no way on the console to obtain any information about why it hung. With sandbox we can actually find out that it died and get a signal or exit code. Add this to make it easier to figure out what happened. So instead of: test/py/u_boot_spawn.py:171: in expect c = os.read(self.fd, 1024).decode(errors='replace') E OSError: [Errno 5] Input/output error We get: test/py/u_boot_spawn.py:171: in expect c = os.read(self.fd, 1024).decode(errors='replace') E ValueError: U-Boot exited with signal 11 (Signals.SIGSEGV) Signed-off-by: Simon Glass <sjg(a)chromium.org> --- Changes in v2: - Fix a few test failure it causes doc/develop/py_testing.rst | 8 ++++++ test/py/u_boot_spawn.py | 56 ++++++++++++++++++++++++++++++-------- 2 files changed, 52 insertions(+), 12 deletions(-) diff --git a/doc/develop/py_testing.rst b/doc/develop/py_testing.rst index 52238ca54d3..06f919609b5 100644 --- a/doc/develop/py_testing.rst +++ b/doc/develop/py_testing.rst @@ -103,6 +103,14 @@ will be written to `${build_dir}/test-log.html`. This is best viewed in a web browser, but may be read directly as plain text, perhaps with the aid of the `html2text` utility. +If sandbox crashes (e.g. with a segfault) you will see message like this:: + + + test/py/u_boot_spawn.py:171: in expect + c = os.read(self.fd, 1024).decode(errors='replace') + E ValueError: U-Boot exited with signal 11 (Signals.SIGSEGV) + + Controlling output ~~~~~~~~~~~~~~~~~~ diff --git a/test/py/u_boot_spawn.py b/test/py/u_boot_spawn.py index 6991b78cca8..e34cb217e84 100644 --- a/test/py/u_boot_spawn.py +++ b/test/py/u_boot_spawn.py @@ -35,6 +35,8 @@ class Spawn(object): """ self.waited = False + self.exit_code = 0 + self.exit_info = '' self.buf = '' self.output = '' self.logfile_read = None @@ -80,25 +82,44 @@ class Spawn(object): os.kill(self.pid, sig) - def isalive(self): + def checkalive(self): """Determine whether the child process is still running. - Args: - None. - Returns: - Boolean indicating whether process is alive. + tuple: + True if process is alive, else False + 0 if process is alive, else exit code of process + string describing what happened ('' or 'status/signal n') """ if self.waited: - return False + return False, self.exit_code, self.exit_info w = os.waitpid(self.pid, os.WNOHANG) if w[0] == 0: - return True - + return True, 0, 'running' + status = w[1] + + if os.WIFEXITED(status): + self.exit_code = os.WEXITSTATUS(status) + self.exit_info = 'status %d' % self.exit_code + elif os.WIFSIGNALED(status): + signum = os.WTERMSIG(status) + self.exit_code = -signum + self.exit_info = 'signal %d (%s)' % (signum, signal.Signals(signum)) self.waited = True - return False + return False, self.exit_code, self.exit_info + + def isalive(self): + """Determine whether the child process is still running. + + Args: + None. + + Returns: + Boolean indicating whether process is alive. + """ + return self.checkalive()[0] def send(self, data): """Send data to the sub-process's stdin. @@ -168,9 +189,20 @@ class Spawn(object): events = self.poll.poll(poll_maxwait) if not events: raise Timeout() - c = os.read(self.fd, 1024).decode(errors='replace') - if not c: - raise EOFError() + try: + c = os.read(self.fd, 1024).decode(errors='replace') + except OSError as err: + # With sandbox, try to detect when U-Boot exits when it + # shouldn't and explain why. This is much more friendly than + # just dying with an I/O error + if err.errno == 5: # Input/output error + alive, exit_code, info = self.checkalive() + if alive: + raise + else: + raise ValueError('U-Boot exited with %s' % info) + else: + raise if self.logfile_read: self.logfile_read.write(c) self.buf += c -- 2.33.0.882.g93a45727a2-goog

2 1

[PATCH] pci: Fix printf format for regions
by Pali Rohár 15 Oct '21

15 Oct '21

Correct printf format for unsigned long long is %llx and not %llxx. Signed-off-by: Pali Rohár <pali(a)kernel.org> --- drivers/pci/pci_auto_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci_auto_common.c b/drivers/pci/pci_auto_common.c index 5e7f3dbd10b5..b9a4aef1ecf8 100644 --- a/drivers/pci/pci_auto_common.c +++ b/drivers/pci/pci_auto_common.c @@ -76,7 +76,7 @@ static void pciauto_show_region(const char *name, struct pci_region *region) { pciauto_region_init(region); debug("PCI Autoconfig: Bus %s region: [%llx-%llx],\n" - "\t\tPhysical Memory [%llx-%llxx]\n", name, + "\t\tPhysical Memory [%llx-%llx]\n", name, (unsigned long long)region->bus_start, (unsigned long long)(region->bus_start + region->size - 1), (unsigned long long)region->phys_start, -- 2.20.1

3 2