January 2021 - U-Boot

[PATCH v9 0/7] Microchip PolarFire SoC support
by Padmarao Begari 15 Jan '21

15 Jan '21

This patch set adds Microchip PolarFire SoC Icicle Kit support to RISC-V U-Boot. The patches are based upon latest U-Boot tree (https://gitlab.denx.de/u-boot/u-boot.git) at commit id ab1a425524a79eeca61e7b67fdf382c7a499346f All drivers namely: NS16550 Serial, Microchip clock, Cadence eMMC and Cadence MACB Ethernet work fine on actual Microchip PolarFire SoC Icicle Kit. Changes in v9: - Remove fdt_high=0xffffffffffffffff, initrd_high=0xffffffffffffffff - Add bootm_size=0x10000000 in the environment variables Changes in v8: - Use 'priv_auto' instead of 'priv_auto_alloc_size' in the clock driver - Remove the doc warnings to build the htmldocs Changes in v7: - Allocate memory using auto-alloc feature in the clock driver - Re-order header files in the clock driver - Add comments in the clock driver Changes in v6: - Update MACB driver for 32-bit/64-bit DMA based on struct mac_config - Rename microchip,mpfs-clock.h to microchip-mpfs-clock.h - Add dual-license GPL or MIT in the clock dt-binding - Move refclk device tree node under / device tree node - Remove the dtc warnings - Fix some typos in device tree and doc Changes in v5: - Replace compatible string "microchip,polarfire-soc" with "microchip,mpfs-icicle-kit" in the device tree - Use "mpfs" as identifier in place of "polarfire-soc", "pfsoc" - Fix some typos in doc - Rename the clock driver files clk_pfsoc_* to mpfs_clk_* - Rename pfsoc-clock.h to mpfs-clock.h Changes in v4: - Add dual-license GPL or MIT in the device tree - Replace microsemi compatible strings with microchip - Add MACB compatible string for Microchip PolarFire SoC ethernet - Update MACB driver for 32-bit/64-bit DMA based on compatible string Changes in v3: - Add 'default y if 64BIT' for config DMA_ADDR_T_64BIT - Update MACB driver for 32-bit/64-bit DMA based on design config register - Add phy-handle in MACB driver to read the phy address from device tree - Fix checkpatch warnings in the clock driver - Remove fu540 related compatible strings from soc device tree node - Move refclk device tree node under /soc device tree node - Use local-mac-address instead of mac-address in the device tree - Rename device tree to microchip-mpfs-icicle-kit.dts - Add U-Boot specific dts microchip-mpfs-icicle-kit-u-boot.dtsi file - Drop the imply DMA_ADDR_T_64BIT from board config - Fix some typos - Update doc with Microchip and Custom boot-flow Changes in v2: - Add clock frequency for the clint device tree node - Move peripheral device tree nodes under /soc device tree node - Device tree nodes are in order based on the address - Enable UART0 for U-Boot logs - Update doc for the U-Boot logs are on UART0 - Move clock and reset index source into patch4 - Remove "dma_addr_r" type in the macb driver - Add lower_32_bits() for 32-bit address in the macb driver - Add set_rate() returns the new clock rate in the clock driver Padmarao Begari (7): riscv: Add DMA 64-bit address support net: macb: Add DMA 64-bit address support for macb net: macb: Add phy address to read it from device tree clk: Add Microchip PolarFire SoC clock driver riscv: dts: Add device tree for Microchip Icicle Kit riscv: Add Microchip MPFS Icicle Kit support doc: board: Add Microchip MPFS Icicle Kit doc arch/riscv/Kconfig | 4 + arch/riscv/dts/Makefile | 1 + .../dts/microchip-mpfs-icicle-kit-u-boot.dtsi | 14 + arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 421 +++++++++ arch/riscv/include/asm/types.h | 4 + board/microchip/mpfs_icicle/Kconfig | 23 + board/microchip/mpfs_icicle/mpfs_icicle.c | 99 ++- configs/microchip_mpfs_icicle_defconfig | 9 +- doc/board/index.rst | 1 + doc/board/microchip/index.rst | 9 + doc/board/microchip/mpfs_icicle.rst | 810 ++++++++++++++++++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/microchip/Kconfig | 5 + drivers/clk/microchip/Makefile | 1 + drivers/clk/microchip/mpfs_clk.c | 123 +++ drivers/clk/microchip/mpfs_clk.h | 44 + drivers/clk/microchip/mpfs_clk_cfg.c | 152 ++++ drivers/clk/microchip/mpfs_clk_periph.c | 187 ++++ drivers/net/macb.c | 144 +++- drivers/net/macb.h | 6 + include/configs/microchip_mpfs_icicle.h | 59 +- .../dt-bindings/clock/microchip-mpfs-clock.h | 45 + 23 files changed, 2101 insertions(+), 62 deletions(-) create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts create mode 100644 doc/board/microchip/index.rst create mode 100644 doc/board/microchip/mpfs_icicle.rst create mode 100644 drivers/clk/microchip/Kconfig create mode 100644 drivers/clk/microchip/Makefile create mode 100644 drivers/clk/microchip/mpfs_clk.c create mode 100644 drivers/clk/microchip/mpfs_clk.h create mode 100644 drivers/clk/microchip/mpfs_clk_cfg.c create mode 100644 drivers/clk/microchip/mpfs_clk_periph.c create mode 100644 include/dt-bindings/clock/microchip-mpfs-clock.h -- 2.17.1

1 7

[RFC 0/3] Change logic of EFI LoadFile2 protocol for initrd loading
by Ilias Apalodimas 15 Jan '21

15 Jan '21

Hi, This is the revised version of [1]. After the discussion we had with Akashi and Heinrich, storing a device path in the variable is preferable to a custom U-Boot string. In hindsight and after reading the EFI spec a bit further, using a custom EFI variable to hold that device path doesn't look great either, we can do better than that. Turns out we can use the array of device paths defined in the EFI spec and store OS specific device paths [2]. So I converted this to an RFC instead, exploring this idea. The variabale is now stored as the second array member in the EFI_LOAD_OPTIONS and later retrieved in order to load the file when the kernel requests it. Another big change is that installing the EFI protocol itself will cause an error if the file's not found and the bootmgr will fallback to other valid boot options. The efi selftest for the load option itself is not included in the RFC. I'll go ahead and change it if there's general agreement on the feature. [1] https://lists.denx.de/pipermail/u-boot/2020-December/436080.html [2] https://uefi.org/sites/default/files/resources/UEFI_Spec_2_8_final.pdf section 3.1.3 Ilias Apalodimas (3): efi_loader: Introduce helper functions for EFI efi_loader: efi_loader: Replace config option for initrd loading efidebug: add multiple device path instances on Boot#### cmd/bootefi.c | 3 + cmd/efidebug.c | 89 ++++++++++++++++-- include/efi_helper.h | 23 +++++ include/efi_loader.h | 1 + lib/efi_loader/Kconfig | 13 +-- lib/efi_loader/efi_bootmgr.c | 3 + lib/efi_loader/efi_helper.c | 146 +++++++++++++++++++++++++++++ lib/efi_loader/efi_load_initrd.c | 154 ++++++++++++++++--------------- 8 files changed, 341 insertions(+), 91 deletions(-) create mode 100644 include/efi_helper.h create mode 100644 lib/efi_loader/efi_helper.c -- 2.30.0.rc2

3 20

[PATCH] mmc: sdhci: skip cache invalidation if DMA is not used
by Yuezhang.Mo＠sony.com 15 Jan '21

15 Jan '21

If DMA(SDMA or ADMA) is not used, the cache invalidation after reading is no need, should be skipped. Otherwise U-Boot may hang at the cache invalidation. Found this issue and tested this fix on DragonBoard 410c. Fixes: commit 4155ad9aac94 ("mmc: sdhci: fix missing cache invalidation after reading by DMA") Signed-off-by: Yuezhang.Mo <Yuezhang.Mo(a)sony.com> --- drivers/mmc/sdhci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 0628934312..29099199a7 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -174,8 +174,10 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data) } } while (!(stat & SDHCI_INT_DATA_END)); +#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)) dma_unmap_single(host->start_addr, data->blocks * data->blocksize, mmc_get_dma_dir(data)); +#endif return 0; } -- 2.25.1

2 1

[PATCH] dm: uclass: allow phandle < -1 with u32 type
by Jianqun Xu 15 Jan '21

15 Jan '21

First, the uclass_find_device_by_phandle will try to get phandle of device node by name, calls the dev_read_u32_default, the function always return the argument 'u32 def', as following: ofnode_read_u32_default(ofnode node, const char *propname, u32 def) assert(ofnode_valid(node)); ofnode_read_u32(node, propname, &def); return def; In this case, the 'def' has been intalized to '-1'. Second, the phandle of fdt is generated by get_node_phandle in livetree, which is part of dtc script tool, as following: get_node_phandle(struct node *root, struct node *node) static cell_t phandle = 1; if ((node->phandle != 0) && (node->phandle != -1)) return node->phandle; while (get_node_by_phandle(root, phandle)) phandle++; The cell_t is defined by 'typedef uint32_t cell_t'. Gernerally, the valid phandle of fdt is from 1 to -2, if dev_read_u32_default return '-1' means the 'u32 def' keeps the intalized value. Signed-off-by: Jianqun Xu <jay.xu(a)rock-chips.com> --- drivers/core/uclass.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index c3f1b73cd6..86cc04ecac 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -385,12 +385,12 @@ int uclass_find_device_by_phandle(enum uclass_id id, struct udevice *parent, { struct udevice *dev; struct uclass *uc; - int find_phandle; + u32 find_phandle; int ret; *devp = NULL; find_phandle = dev_read_u32_default(parent, name, -1); - if (find_phandle <= 0) + if (find_phandle == -1) return -ENOENT; ret = uclass_get(id, &uc); if (ret) -- 2.25.1

1 0

[PATCH] env: Remove all dependencies for SYS_REDUNDAND_ENVIRONMENT
by Michal Simek 14 Jan '21

14 Jan '21

CONFIG_SYS_REDUNDAND_ENVIRONMENT is changing in env_internal.h how u-boot works with variables. struct environment_s has one byte flags property which also affects ENV_SIZE macro. I have reached the case where CONFIG_ENV_IS_NOWHERE is default setup but custom scripts can be designed in a way that u-boot is asked to import/export variables from/to file which can be in certain format. That's why also for this configuration make sense to enable CONFIG_SYS_REDUNDAND_ENVIRONMENT because it depends on environment file format. The patch is removing dependency on this configuration to support selecting environment file format without any specific dependency where variables are stored. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- env/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/env/Kconfig b/env/Kconfig index 67ce93061b7d..356d8a0605b4 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -411,8 +411,6 @@ config ENV_IS_IN_UBI config SYS_REDUNDAND_ENVIRONMENT bool "Enable redundant environment support" - depends on ENV_IS_IN_EEPROM || ENV_IS_IN_FLASH || ENV_IS_IN_MMC || \ - ENV_IS_IN_NAND || ENV_IS_IN_SPI_FLASH || ENV_IS_IN_UBI help Normally, the environemt is stored in a single location. By selecting this option, you can then define where to hold a redundant -- 2.30.0

2 5

[PATCH] net: sun8i-emac: Allow all RGMII PHY modes
by Andre Przywara 14 Jan '21

14 Jan '21

So far all GBit users of the sun8i-emac driver were using the "rgmii" PHY mode, even though this turns out to be mostly wrong. It just worked because the PHY driver doesn't do the proper setup (yet). In fact for most boards the "rgmii-id" or "rgmii-txid" PHY modes are the correct ones. To allow the DTs to describe the phy-mode correctly, and to stay compatible with Linux, at least allow those other RGMII modes in the driver. This avoids breakage if mainline DTs will be synced with U-Boot. An almost identical patch (f1239d8aa84d) was merged into the Linux driver and has been backported to stable kernels. Signed-off-by: Andre Przywara <andre.przywara(a)arm.com> --- drivers/net/sun8i_emac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 4524604126c..5db33f5c135 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -353,6 +353,9 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata, /* default */ break; case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: reg |= SC_EPIT | SC_ETCS_INT_GMII; break; case PHY_INTERFACE_MODE_RMII: -- 2.17.5

4 3

[PATCH v3 0/6] Add support for ECDSA image signing (with test)
by Alexandru Gagniuc 14 Jan '21

14 Jan '21

## Purpose and intent The ROM code on the STM32MP requires an ECDSA-signed FSBL. Maintaining verified boot through FIT images would require switching to an RSA key after SPL. This would be stupid, so this series is focused on enabling ECDSA signing. The use case that I am focused on is signing an existing FIT image: mkimage -F some-existing.fit --signing-key some/key.pem I don't care about signing while assembling the FIT. The reason is that I want the machine that builds things to be separate from the machine that has access to the super-secret-key.pem. The purpose of this series is to lay the foundations for ECDSA FIT signature verification on STM32MP. # Implementation ## Signing I initially tried to model this after the RSA implementation (rsa-sign.c), but that didn't go well for a few reasons: (a) The openssl/libcrypto API is a pain in the ass (b) The RSA path doesn't have a way to pass a specific key file. On point (a), I don't want to spend too much time battling a C API for crypto. I find pyCryptodomex to be vastly superior, but that is not available for mkimage. I am thus focusing on the simple case of key in, signature out. On point (b), the RSA path takes the FDT property 'key-name-hint' to decide which key file to read from disk. In the context of "which fdt node describes my signing key", this makes sense. On the other hand, 'key-name-hint' is also used as the basename of where the key is on the filesystem. This leads to some funny search paths, such as "some/dir/(null).key" So I am using the -K option to mkimage as the _full_ path to the key file. It doesn't have to be named .key, it doesn't have to be named .crt, and it doesn't have to exist in a particular directory (as is the case for the RSA path). Take that as is for here -- we can discuss the merits of this in a separate thread. ## Verification This will be implemented in a future patch series. The proof of concept is on github: https://github.com/mrnuke/u-boot/commits/patch-stm32-ecdsa # Testing test/py/tests/test_fit_ecdsa.py is implementing a test for mkimage. It lets mkimage run wild, tehn verifies the signature against pyCryptodomex -- see earlier point on for I didn't use openssl. # Things not yet resolved: - is mkimage '-k' supposed to be a directory or file path I'm hoping I can postpone answering this question pending further discussion. # Changes since v1 and v2: - Added lots of function comments - Replaced hardcoded error numbers with more meaningful errno numbers - CHanged some error paths to use 'return log_msg_ret' Alexandru Gagniuc (6): lib: Rename rsa-checksum.c to hash-checksum.c lib/rsa: Make fdt_add_bignum() available outside of RSA code lib: Add support for ECDSA image signing doc: signature.txt: Document devicetree format for ECDSA keys test/py: Add pycryptodomex to list of required pakages test/py: ecdsa: Add test for mkimage ECDSA signing common/image-fit-sig.c | 2 +- common/image-sig.c | 13 +- doc/uImage.FIT/signature.txt | 7 +- include/image.h | 5 +- include/u-boot/ecdsa.h | 94 ++++++ include/u-boot/fdt-libcrypto.h | 27 ++ .../{rsa-checksum.h => hash-checksum.h} | 0 lib/Makefile | 1 + lib/crypto/pkcs7_verify.c | 2 +- lib/crypto/x509_public_key.c | 2 +- lib/ecdsa/ecdsa-libcrypto.c | 306 ++++++++++++++++++ lib/fdt-libcrypto.c | 72 +++++ lib/{rsa/rsa-checksum.c => hash-checksum.c} | 3 +- lib/rsa/Makefile | 2 +- lib/rsa/rsa-sign.c | 65 +--- test/py/requirements.txt | 1 + test/py/tests/test_fit_ecdsa.py | 111 +++++++ tools/Makefile | 7 +- 18 files changed, 645 insertions(+), 75 deletions(-) create mode 100644 include/u-boot/ecdsa.h create mode 100644 include/u-boot/fdt-libcrypto.h rename include/u-boot/{rsa-checksum.h => hash-checksum.h} (100%) create mode 100644 lib/ecdsa/ecdsa-libcrypto.c create mode 100644 lib/fdt-libcrypto.c rename lib/{rsa/rsa-checksum.c => hash-checksum.c} (96%) create mode 100644 test/py/tests/test_fit_ecdsa.py -- 2.26.2

3 13

[PATCH 1/1] image-fit: fit_check_format check for valid FDT
by Heinrich Schuchardt 14 Jan '21

14 Jan '21

fit_check_format() must check that the buffer contains a flattened device tree before calling any device tree library functions. Failure to do may cause segmentation faults. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- common/image-fit.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/common/image-fit.c b/common/image-fit.c index 6a8787ca0a..21c44bdf69 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1553,6 +1553,12 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp) */ int fit_check_format(const void *fit) { + /* A FIT image must be a valid FDT */ + if (fdt_check_header(fit)) { + debug("Wrong FIT format: not a flattened device tree\n"); + return 0; + } + /* mandatory / node 'description' property */ if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) { debug("Wrong FIT format: no description\n"); -- 2.29.2

2 1

Pull request: u-boot-riscv/master
by uboot＠andestech.com 14 Jan '21

14 Jan '21

Hi Tom, Please pull some riscv updates: - Update qemu-riscv.rst build instructions. - Add support for SPI on Kendryte K210. - Add Microchip PolarFire SoC Icicle Kit support. Thanks Rick CI: passed https://gitlab.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/5853 The following changes since commit ee6726be4f0dccb612f0193c62ca149164c8a5af: Merge tag 'ti-v2021.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti (2021-01-12 09:32:48 -0500) are available in the Git repository at: git@gitlab.denx.de:u-boot/custodians/u-boot-riscv.git for you to fetch changes up to 477b035bd200fbef3045902f3ea2fe26cd831a5c: doc: board: Add Microchip MPFS Icicle Kit doc (2021-01-13 08:51:55 +0800) ---------------------------------------------------------------- Atish Patra (1): doc: qemu-riscv: Fix opensbi build instructions Padmarao Begari (7): riscv: Add DMA 64-bit address support net: macb: Add DMA 64-bit address support for macb net: macb: Add phy address to read it from device tree clk: Add Microchip PolarFire SoC clock driver riscv: dts: Add device tree for Microchip Icicle Kit riscv: Add Microchip MPFS Icicle Kit support doc: board: Add Microchip MPFS Icicle Kit doc Sean Anderson (1): riscv: Add support for SPI on Kendryte K210 arch/riscv/Kconfig | 4 + arch/riscv/dts/Makefile | 1 + arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi | 14 +++ arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 421 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/riscv/include/asm/types.h | 4 + board/microchip/mpfs_icicle/Kconfig | 23 +++++ board/microchip/mpfs_icicle/mpfs_icicle.c | 99 +++++++++++++++++- board/sipeed/maix/Kconfig | 16 +++ configs/microchip_mpfs_icicle_defconfig | 9 +- configs/sipeed_maix_bitm_defconfig | 11 ++ doc/board/emulation/qemu-riscv.rst | 2 +- doc/board/index.rst | 1 + doc/board/microchip/index.rst | 9 ++ doc/board/microchip/mpfs_icicle.rst | 810 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ doc/board/sipeed/maix.rst | 315 ++++++++++++++++++++++++++++++++++++++++++++++++--------- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/microchip/Kconfig | 5 + drivers/clk/microchip/Makefile | 1 + drivers/clk/microchip/mpfs_clk.c | 123 +++++++++++++++++++++++ drivers/clk/microchip/mpfs_clk.h | 44 ++++++++ drivers/clk/microchip/mpfs_clk_cfg.c | 152 ++++++++++++++++++++++++++++ drivers/clk/microchip/mpfs_clk_periph.c | 187 ++++++++++++++++++++++++++++++++++ drivers/net/macb.c | 144 ++++++++++++++++++++++---- drivers/net/macb.h | 6 ++ include/configs/microchip_mpfs_icicle.h | 60 ++++------- include/configs/sipeed-maix.h | 7 +- include/dt-bindings/clock/microchip-mpfs-clock.h | 45 +++++++++ 28 files changed, 2402 insertions(+), 113 deletions(-) create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts create mode 100644 doc/board/microchip/index.rst create mode 100644 doc/board/microchip/mpfs_icicle.rst create mode 100644 drivers/clk/microchip/Kconfig create mode 100644 drivers/clk/microchip/Makefile create mode 100644 drivers/clk/microchip/mpfs_clk.c create mode 100644 drivers/clk/microchip/mpfs_clk.h create mode 100644 drivers/clk/microchip/mpfs_clk_cfg.c create mode 100644 drivers/clk/microchip/mpfs_clk_periph.c create mode 100644 include/dt-bindings/clock/microchip-mpfs-clock.h

3 2

[PULL] Pull request for u-boot master / v2021.04 = u-boot-stm32-20210113
by Patrick DELAUNAY 14 Jan '21

14 Jan '21

Hi Tom, Please pull the STM32 related patches for u-boot/master, v2021.04: u-boot-stm32-20210113 - Enable logging features for stm32mp15 boards - Update MAINTAINERS emails for STI and STM32 - Activate OF_LIVE for ST stm32mp15 boards - Switch to MCO2 for PHY 50 MHz clock for DHCOM boards - Correction in stm32prog command on uart: always flush DFU on start command - Update USB-C power detection algorithm on DK boards CI status: https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/5859 Thanks, Patrick git request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20210113 The following changes since commit ee6726be4f0dccb612f0193c62ca149164c8a5af: Merge tag 'ti-v2021.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti (2021-01-12 09:32:48 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20210113 for you to fetch changes up to 7ccaa31380a4abb2b23718008a54fe2917db8edf: MAINTAINERS: Update STi and STM32 maintainers emails in remaining files (2021-01-13 09:52:58 +0100) ---------------------------------------------------------------- - Enable logging features for stm32mp15 boards - Update MAINTAINERS emails for STI and STM32 - Activate OF_LIVE for ST stm32mp15 boards - Switch to MCO2 for PHY 50 MHz clock for DHCOM boards - Correction in stm32prog command on uart: always flush DFU on start command - Update USB-C power detection algorithm on DK boards ---------------------------------------------------------------- Marek Vasut (1): ARM: dts: stm32: Switch to MCO2 for PHY 50 MHz clock Michal Simek (1): ARM: stm32: Use firmware property instead of loadables Patrice Chotard (2): board: stm32pm1: update USB-C power detection algorithm on DK boards MAINTAINERS: Update STi and STM32 maintainers emails in remaining files Patrick Delaunay (35): arm: stm32mp: migrate trace to log macro arm: stm32mp: migrate cmd_stm32prog to log macro arm: stm32mp: bsec: migrate trace to log macro pinctrl: stm32: migrate trace to log macro gpio: stm32-gpio: migrate trace to dev and log macro remoproc: stm32: migrate trace to log macro ram: stm32: migrate trace to log macro ram: stm32mp1: migrate trace to dev or log macro mmc: stm32_sdmmc2: migrate trace to dev and log macro timer: stm32: migrate trace to log macro hwspinlock: stm32: migrate trace to log macro rtc: stm32: migrate trace to log macro watchdog: stm32mp: migrate trace to dev macro power: regulator: stm32-verfbuf: define LOG_CATEGORY misc: rcc: migrate trace to dev macro misc: rcc: keep the rcc device name for subnode clk: stm32mp1: migrate trace to dev and log macro clk: clk_stm32f: migrate trace to dev and log macro clk: clk_stm32h7: migrate trace to dev and log macro reset: stm32-reset: migrate trace to dev and log macro mailbox: stm32-ipcc: migrate trace to dev and log macro i2c: stm32f7_i2c: migrate trace to dev and log macro phy: stm32-usbphyc: migrate trace to dev and log macro spi: stm32_spi: migrate trace to dev and log macro spi: stm32_qspi: migrate trace to dev and log macro mtd: stm32_fmc2: migrate trace to dev and log macro memory: stm32-fmc2: migrate trace to dev and log macro serial: stm32: define LOG_CATEGORY video: stm32_ltdc: migrate trace to dev and log macro video: stm32_dsi: migrate trace to dev and log macro board: st: stm32mp1: migrate trace to dev and log macro board: st: common: migrate trace to dev and log macro configs: stm32mp15: enable LOG features configs: stm32mp1: activate OF_LIVE for DT live support arm: stm32mp: stm32prog: always flush DFU on start command for uart arch/arm/dts/stih410-b2260-u-boot.dtsi | 2 +- arch/arm/dts/stih410-b2260.dts | 2 +- arch/arm/dts/stm32429i-eval-u-boot.dtsi | 2 +- arch/arm/dts/stm32f429-disco-u-boot.dtsi | 2 +- arch/arm/dts/stm32f469-disco-u-boot.dtsi | 2 +- arch/arm/dts/stm32h743i-disco.dts | 2 +- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 25 ++++++++++--- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 3 +- arch/arm/mach-stm32mp/boot_params.c | 8 ++-- arch/arm/mach-stm32mp/bsec.c | 38 ++++++++++--------- arch/arm/mach-stm32mp/cmd_stm32key.c | 3 +- arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c | 4 +- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 112 +++++++++++++++++++++++++++---------------------------- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 +- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c | 37 +++++++++--------- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c | 14 +++---- arch/arm/mach-stm32mp/cpu.c | 18 +++++---- arch/arm/mach-stm32mp/dram_init.c | 8 ++-- arch/arm/mach-stm32mp/fdt.c | 17 +++++---- arch/arm/mach-stm32mp/pwr_regulator.c | 2 + arch/arm/mach-stm32mp/spl.c | 16 ++++---- board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 8 ++-- board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its | 2 +- board/st/common/MAINTAINERS | 2 +- board/st/common/stm32mp_dfu.c | 3 +- board/st/common/stm32mp_mtdparts.c | 5 ++- board/st/common/stpmic1.c | 5 ++- board/st/common/stusb160x.c | 2 + board/st/stih410-b2260/MAINTAINERS | 2 +- board/st/stih410-b2260/Makefile | 2 +- board/st/stm32f429-evaluation/MAINTAINERS | 2 +- board/st/stm32f429-evaluation/Makefile | 2 +- board/st/stm32f469-discovery/MAINTAINERS | 2 +- board/st/stm32f469-discovery/Makefile | 2 +- board/st/stm32h743-disco/MAINTAINERS | 2 +- board/st/stm32h743-disco/Makefile | 2 +- board/st/stm32h743-eval/MAINTAINERS | 2 +- board/st/stm32h743-eval/Makefile | 2 +- board/st/stm32mp1/MAINTAINERS | 2 +- board/st/stm32mp1/stm32mp1.c | 234 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------------------- configs/stm32mp15_basic_defconfig | 3 ++ configs/stm32mp15_trusted_defconfig | 2 + doc/board/st/stm32mp1.rst | 2 +- doc/driver-model/bind.rst | 2 +- drivers/clk/clk_stm32f.c | 39 +++++++++---------- drivers/clk/clk_stm32h7.c | 70 ++++++++++++++++++---------------- drivers/clk/clk_stm32mp1.c | 147 +++++++++++++++++++++++++++++++++++------------------------------------ drivers/gpio/stm32_gpio.c | 4 +- drivers/hwspinlock/stm32_hwspinlock.c | 2 + drivers/i2c/stm32f7_i2c.c | 74 ++++++++++++++++++------------------ drivers/mailbox/stm32-ipcc.c | 16 ++++---- drivers/memory/stm32-fmc2-ebi.c | 30 ++++++++------- drivers/misc/stm32_rcc.c | 10 +++-- drivers/mmc/stm32_sdmmc2.c | 84 +++++++++++++++++++++-------------------- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 ++++++++++---------- drivers/phy/phy-stm32-usbphyc.c | 18 +++++---- drivers/pinctrl/pinctrl_stm32.c | 30 ++++++++------- drivers/power/regulator/stm32-vrefbuf.c | 2 + drivers/ram/stm32_sdram.c | 10 +++-- drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++++++++--------- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 38 ++++++++++--------- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 ++++++---- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 ++++++++++++++++++++++++++++++------------------------------ drivers/remoteproc/stm32_copro.c | 3 +- drivers/reset/stm32-reset.c | 13 +++++-- drivers/rtc/stm32_rtc.c | 3 ++ drivers/serial/serial_stm32.c | 3 ++ drivers/spi/stm32_qspi.c | 46 ++++++++++++----------- drivers/spi/stm32_spi.c | 31 ++++++++------- drivers/timer/stm32_timer.c | 2 + drivers/video/stm32/stm32_dsi.c | 18 +++++---- drivers/video/stm32/stm32_ltdc.c | 33 ++++++++-------- drivers/watchdog/stm32mp_wdt.c | 9 +++-- 74 files changed, 846 insertions(+), 723 deletions(-)

2 1