August 2020 - U-Boot

[PATCH 1/2] configs: odroid-n2: update for HDMI output & USB keyboard
by Anand Moon 24 Aug '20

24 Aug '20

Enable options to permit HDMI output on Odroid-N2 G12B boards. Enable VPU Power Domain. Enable USB_KEYBOARD. Signed-off-by: Anand Moon <linux.amoon(a)gmail.com> --- configs/odroid-n2_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig index 358d1fc630..e8b8da9084 100644 --- a/configs/odroid-n2_defconfig +++ b/configs/odroid-n2_defconfig @@ -34,6 +34,8 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_MESON_G12A_USB_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_RESET=y @@ -47,10 +49,17 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y # CONFIG_USB_DWC3_GADGET is not set CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e CONFIG_USB_GADGET_PRODUCT_NUM=0xfada CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y CONFIG_OF_LIBFDT_OVERLAY=y -- 2.28.0

2 3

[PULL][PATCH 0/9] Raspberry pi improvements qemu/usb/ethernet
by Jason Wessel 24 Aug '20

24 Aug '20

I would like to get these patches merged for the next release, but there has been no movement on some of them in over a month. I would fix any problems with the patches, but I am not aware of any. The patch set has been tested on all the generations of the raspberry pi hardware and qemu and passed the travis ci checks. -- Travis CI checks -- Pull Request #35 Rpi master The commit 57805f2270c4 ("net: bcmgenet: Don't set ID_MODE_DIS when not using RGMII") needed to be extended for the case of using the rgmii-rxid. The latest version of the Rasbperry Pi4 dtb files for the 5.4 now specify the rgmii-rxid. Signed-off-by: Jason Wessel <jason.wessel(a)windriver.com> Commit 9a21770 #35: Rpi master Branch master -- End Travis CI checks -- Prior to this patch set, I had just a small number of USB keyboards function properly with the Rasbpberry Pi boards. Nearly every composite USB keyboard/mouse I had access to including the Raritan IP/KVM devices would not initialize properly. v1-consoldiated: - Consolidated all the usb and ethernet patches into a single set - No changes to any of the patches v1: - Testing completed against all generations of raspberry pi boards - check patch warnings add errors have been fixed rfc v3: - Add in patch 6 - Finally got the GearHead keyboard + mouse composite USB device working rfc v2: - Minor cleanups to patches 1-3 based on prior review - Patch 4 & 5 are new to fix various xhchi crashes while having additional devices plugged in along with booting off the usb port. The nonblocking mode turned out to be somewhat complex. rfc v1: The original purpose of the patch set was to fix problems with the USB keyboard support with the rpi4. The generic xhci code lacks a non blocking call to read an event. This causes major problems for the sleep function as well as for ethernet downloads where a keyboard poll for interrupting the download blocks for 5 seconds. ---------------------------------------------------------------- The following changes since commit fee68b98fe3890631a9bdf8f8db328179011ee3f: Merge tag 'efi-2020-10-rc1-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi (2020-07-16 16:35:15 -0400) are available in the Git repository at: https://github.com/jwessel/u-boot for you to fetch changes up to fb5b89c4f2aa2a95c4024b156099c838d1199bd0: bcmgenet: Add support for rgmii-rxid (2020-07-17 06:35:11 -0700) ---------------------------------------------------------------- Jason Wessel (9): fs/fat/fat.c: Do not perform zero block reads if there are no blocks left xhci: Add polling support for USB keyboards usb_kbd: succeed even if no interrupt is pending common/usb.c: Work around keyboard reporting "USB device not accepting new address" xhci-ring.c: Add the poll_pend state to properly abort transactions xhci-ring: Fix crash when issuing "usb reset" usb.c: Add a retry in the usb_prepare_device() bcmgenet: fix DMA buffer management bcmgenet: Add support for rgmii-rxid common/usb.c | 16 ++++-- common/usb_kbd.c | 4 +- drivers/net/bcmgenet.c | 20 +++---- drivers/usb/host/xhci-ring.c | 123 +++++++++++++++++++++++++++++++++---------- drivers/usb/host/xhci.c | 11 ++-- fs/fat/fat.c | 5 +- include/usb/xhci.h | 5 +- 7 files changed, 136 insertions(+), 48 deletions(-)

3 12

[PATCH v2 1/8] moveconfig: Skip binary and ELF files
by Simon Glass 23 Aug '20

23 Aug '20

Add a few more file extensions to the list of files that should not be processed. This avoids unicode errors, for example. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- (no changes since v1) tools/moveconfig.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/moveconfig.py b/tools/moveconfig.py index 36361f9ed1b..9514d9a00cb 100755 --- a/tools/moveconfig.py +++ b/tools/moveconfig.py @@ -666,7 +666,8 @@ def cleanup_headers(configs, options): if dirpath == os.path.join('include', 'generated'): continue for filename in filenames: - if not filename.endswith(('~', '.dts', '.dtsi')): + if not filename.endswith(('~', '.dts', '.dtsi', '.bin', + '.elf')): header_path = os.path.join(dirpath, filename) # This file contains UTF-16 data and no CONFIG symbols if header_path == 'include/video_font_data.h': -- 2.28.0.236.gb10cc79966-goog

2 15

[PATCH] arm: dts: fix ast2500-evb inclusion for correct target
by Thirupathaiah Annapureddy 23 Aug '20

23 Aug '20

Include ast2500-evb.dtb for CONFIG_TARGET_EVB_AST2500 instead of for all aspeed targets. Signed-off-by: Thirupathaiah Annapureddy <thiruan(a)linux.microsoft.com> --- arch/arm/dts/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7e29b9096b..d019f26983 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -938,7 +938,7 @@ dtb-$(CONFIG_ARCH_BCM6858) += \ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb -dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb +dtb-$(CONFIG_TARGET_EVB_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb -- 2.25.2

3 6

[PATCH] Convert CONFIG_NETCONSOLE to Kconfig
by Tom Rini 23 Aug '20

23 Aug '20

This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <trini(a)konsulko.com> --- arch/arm/mach-kirkwood/include/mach/config.h | 1 - configs/SBx81LIFKW_defconfig | 1 + configs/SBx81LIFXCAT_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/brppt2_defconfig | 1 + configs/d2net_v2_defconfig | 1 + configs/db-88f6281-bp-nand_defconfig | 1 + configs/db-88f6281-bp-spi_defconfig | 1 + configs/dns325_defconfig | 1 + configs/dockstar_defconfig | 1 + configs/dreamplug_defconfig | 1 + configs/ds109_defconfig | 1 + configs/edminiv2_defconfig | 1 + configs/goflexhome_defconfig | 1 + configs/guruplug_defconfig | 1 + configs/gwventana_emmc_defconfig | 1 + configs/gwventana_gw5904_defconfig | 1 + configs/gwventana_nand_defconfig | 1 + configs/ib62x0_defconfig | 1 + configs/iconnect_defconfig | 1 + configs/inetspace_v2_defconfig | 1 + configs/km_kirkwood_128m16_defconfig | 1 + configs/km_kirkwood_defconfig | 1 + configs/km_kirkwood_pci_defconfig | 1 + configs/kmcoge5un_defconfig | 1 + configs/kmnusa_defconfig | 1 + configs/kmsuse2_defconfig | 1 + configs/lschlv2_defconfig | 1 + configs/lsxhl_defconfig | 1 + configs/mx6qsabrelite_defconfig | 1 + configs/nas220_defconfig | 1 + configs/net2big_v2_defconfig | 1 + configs/netspace_lite_v2_defconfig | 1 + configs/netspace_max_v2_defconfig | 1 + configs/netspace_mini_v2_defconfig | 1 + configs/netspace_v2_defconfig | 1 + configs/nitrogen6dl2g_defconfig | 1 + configs/nitrogen6dl_defconfig | 1 + configs/nitrogen6q2g_defconfig | 1 + configs/nitrogen6q_defconfig | 1 + configs/nitrogen6s1g_defconfig | 1 + configs/nitrogen6s_defconfig | 1 + configs/novena_defconfig | 1 + configs/nsa310s_defconfig | 1 + configs/openrd_base_defconfig | 1 + configs/openrd_client_defconfig | 1 + configs/openrd_ultimate_defconfig | 1 + configs/pogo_e02_defconfig | 1 + configs/sansa_fuze_plus_defconfig | 1 + configs/sheevaplug_defconfig | 1 + configs/xfi3_defconfig | 1 + include/configs/SBx81LIFKW.h | 1 - include/configs/SBx81LIFXCAT.h | 1 - include/configs/bur_cfg_common.h | 1 - include/configs/dns325.h | 1 - include/configs/edb93xx.h | 1 - include/configs/edminiv2.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/lacie_kw.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/novena.h | 1 - include/configs/nsa310s.h | 1 - include/configs/sansa_fuze_plus.h | 2 -- include/configs/xfi3.h | 2 -- 66 files changed, 52 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index beedc125b63e..3bd032e08790 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -58,7 +58,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ #endif /* CONFIG_CMD_NET */ diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index f5143b231b68..a1abbc13bf25 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -30,6 +30,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig index b2c3b1bde3de..81e090748323 100644 --- a/configs/SBx81LIFXCAT_defconfig +++ b/configs/SBx81LIFXCAT_defconfig @@ -32,6 +32,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index 48c1b16cf856..6ecea550f194 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -74,6 +74,7 @@ CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_SYS_MMC_ENV_PART=2 CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig index 7c04ea194e90..5dfe1ac30625 100644 --- a/configs/brppt1_nand_defconfig +++ b/configs/brppt1_nand_defconfig @@ -75,6 +75,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig index bc0ae75d7dc5..fa8ef5bb458c 100644 --- a/configs/brppt1_spi_defconfig +++ b/configs/brppt1_spi_defconfig @@ -81,6 +81,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index d6f7ea2bc72a..4d5cd44ca80c 100644 --- a/configs/brppt2_defconfig +++ b/configs/brppt2_defconfig @@ -65,6 +65,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_OF_TRANSLATE is not set diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index be8cfa2d6033..0b6b907a8e1d 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/db-88f6281-bp-nand_defconfig b/configs/db-88f6281-bp-nand_defconfig index b690cd24baa9..4fff3269aff1 100644 --- a/configs/db-88f6281-bp-nand_defconfig +++ b/configs/db-88f6281-bp-nand_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_MTD=y diff --git a/configs/db-88f6281-bp-spi_defconfig b/configs/db-88f6281-bp-spi_defconfig index 90d6259150b5..07e9db7f41b2 100644 --- a/configs/db-88f6281-bp-spi_defconfig +++ b/configs/db-88f6281-bp-spi_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_MTD=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 63743f8844ac..8a04e1492c0a 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -34,6 +34,7 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index 44327cd21e6d..0b434f46a097 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -30,6 +30,7 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NETCONSOLE=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index ea8c2522c048..2c27726fcde4 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -32,6 +32,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x100000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index e49488737824..e412e3f5937c 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -28,6 +28,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x3D0000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 7c9cfdd03455..916775e9ed17 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -31,6 +31,7 @@ CONFIG_ISO_PARTITION=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFF84000 +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index 694268233a68..b271822dcbfd 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -35,6 +35,7 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 5833f1273316..f7e934bcf89e 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 537cbdf15215..497a54ba5d57 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -67,6 +67,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 16ac54fb45cd..d9352eb727e6 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -67,6 +67,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 94d42a415fb5..f618b74a9ddd 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -69,6 +69,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_SUPPORT_EMMC_RPMB=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 52dba55e66ed..1fbf03442d0c 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -34,6 +34,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 6b484c83a3b0..d3aea6ead2eb 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -30,6 +30,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 6871adc9c163..819f5e0cea73 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index 50bcb79865f8..3416c575f69b 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_EEPROM=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index bf732c823410..51d41cc99440 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_EEPROM=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 2cf3a994a653..80ff773ca01c 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_EEPROM=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 97b10af42e5e..51721bb497f1 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index 2b3a3d2c73ff..96200b5fd718 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/kmsuse2_defconfig b/configs/kmsuse2_defconfig index 82dc9ff2e210..b5c7ebfa79fa 100644 --- a/configs/kmsuse2_defconfig +++ b/configs/kmsuse2_defconfig @@ -43,6 +43,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_RAM=y # CONFIG_MMC is not set diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 133905010bbb..80ab7108dec6 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -33,6 +33,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index e52ed1872c74..6c8a9e1277c0 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -33,6 +33,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 216e21ad79d2..3e874593a7ff 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -42,6 +42,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 8b4385b2db26..e89b6b9e14d6 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_BLK=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 13e7956780cc..e2e8341a4e6f 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index d8b5ce20ec11..ce681ce53854 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 3168641272b2..af55d385d496 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 6d07e873dd51..45c16d9d166c 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index e99ea75b01d1..6b813b5c8444 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -40,6 +40,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_MAX_HZ=y CONFIG_ENV_SPI_MAX_HZ=20000000 CONFIG_ENV_ADDR=0x70000 +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y CONFIG_BLK=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 3131c51bdeda..1c1016a4173b 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -46,6 +46,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x12000000 diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 86c2c4ff13dc..310d42eb487d 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -46,6 +46,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x12000000 diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 16cf5f3e5b19..545548eb693f 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -47,6 +47,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index ea9098ad68a5..0846b40e9328 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -47,6 +47,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index 8a67b419e0fc..05ba13a9a2ec 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -46,6 +46,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x12000000 diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index 71dff7ae857b..b28cd640bee8 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -46,6 +46,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x12000000 diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 33cda1b383c4..20c3aa1af9bf 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_DWC_AHSATA=y CONFIG_FSL_USDHC=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index d9470f171ae5..bec1707ddc13 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -31,6 +31,7 @@ CONFIG_ISO_PARTITION=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index e0309db43ff1..ebe22ab877d9 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index 2bf18dbe66ca..04fcea2d0d4f 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index 35962333ea44..de7526dd7086 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -36,6 +36,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MVSATA_IDE=y # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index ee76b44382b7..34d1226686e1 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -30,6 +30,7 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/sansa_fuze_plus_defconfig b/configs/sansa_fuze_plus_defconfig index 1b5288ca9ad2..0cf85955844b 100644 --- a/configs/sansa_fuze_plus_defconfig +++ b/configs/sansa_fuze_plus_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MXS_GPIO=y CONFIG_MMC_MXS=y CONFIG_CONS_INDEX=0 diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 40d50d66e577..34da356b8e2a 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -37,6 +37,7 @@ CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_MTD=y diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig index bc95e19c28dc..c529f2f06dd1 100644 --- a/configs/xfi3_defconfig +++ b/configs/xfi3_defconfig @@ -31,6 +31,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NETCONSOLE=y CONFIG_MXS_GPIO=y CONFIG_MMC_MXS=y CONFIG_CONS_INDEX=0 diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index b85f27164352..eaa6b9246c98 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -84,7 +84,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 84f24400fa9d..c0dc3d38c123 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -84,7 +84,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h index 325ef1e754c1..05915b4cffdf 100644 --- a/include/configs/bur_cfg_common.h +++ b/include/configs/bur_cfg_common.h @@ -27,7 +27,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* Network console */ -#define CONFIG_NETCONSOLE 1 #define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ /* As stated above, the following choices are optional. */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 62107625e256..ea8d28b5b536 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -33,7 +33,6 @@ */ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_NETCONSOLE #endif /* diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 3b35b5ce11ce..2f302b921bc4 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -83,7 +83,6 @@ /* Network hardware configuration */ #define CONFIG_DRIVER_EP93XX_MAC #define CONFIG_MII_SUPPRESS_PREAMBLE -#undef CONFIG_NETCONSOLE /* SDRAM configuration */ #if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 19a923b5013d..dd16e3fbda43 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -114,7 +114,6 @@ #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION /* don't randomize MAC */ #define CONFIG_PHY_BASE_ADR 0x8 #define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ -#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ #endif diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index a666d420e4b6..768836010735 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -115,7 +115,6 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USBD_HS -#define CONFIG_NETCONSOLE /* Framebuffer and LCD */ #define CONFIG_VIDEO_LOGO diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 031bc995e3ba..420c1d49b08e 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -77,7 +77,6 @@ */ #ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_NETCONSOLE #endif /* diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 0598224f6678..fdcf43f44d18 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_USBD_HS -#define CONFIG_NETCONSOLE #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/novena.h b/include/configs/novena.h index 62faef0703e4..8aabf06fa2a2 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -98,7 +98,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Gadget part */ #define CONFIG_USBD_HS -#define CONFIG_NETCONSOLE #endif /* Video output */ diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 13812c43a122..1cb0d68b5af2 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -40,7 +40,6 @@ /* Ethernet driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_NETCONSOLE #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 1 #define CONFIG_RESET_PHY_R diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index 5b0ea9a335e9..853a89ced129 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -31,8 +31,6 @@ #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 - -#define CONFIG_NETCONSOLE #endif /* The rest of the configuration is shared */ diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index 4fc7154fff51..80849129b931 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -31,8 +31,6 @@ #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_MXS_PORT0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 - -#define CONFIG_NETCONSOLE #endif /* The rest of the configuration is shared */ -- 2.17.1

1 1

[PATCHv3 00/10] Introduce B1x5v2 support
by Sebastian Reichel 23 Aug '20

23 Aug '20

This series introduces support for a new i.MX6DL based GE patient monitor series. Patch 1: Add support for storing bootcount in SPI-flash Patch 2: Fix reading the status of output GPIOs Patch 3+4: Improve M41T62 RTC driver's reset routine. PATCH 5: Support disable_ldb_di_clock_sources for i.MX6DL Patch 6: Add poweroff-gpio support Patch 7-9: restructure common GE code Patch 10: Add the actual board, using SPL and DM Changes since PATCHv2 [1]: * PATCH 10: Fixed network phy mode ("rgmii" -> "rgmii-id") * PATCH 6: Fixed nits reported by Simon Glass and added is Reviewed-by Tag. Changes since PATCHv1 [0]: * Rebased to v2020.10-rc2 * Original patch 1 (support for DM_SPI_FLASH with non-DM SPL) has been dropped, since a similar patch has been merged in the meantime * poweroff-gpio support is now added using sysreset uclass instead of introducing a new poweroff uclass * B1x5v2 patch has been updated to follow recent U-Boot changes and to add USB mass storage support [0] http://patchwork.ozlabs.org/project/uboot/list/?series=187150 [1] http://patchwork.ozlabs.org/project/uboot/list/?series=195398 -- Sebastian Sebastian Reichel (10): bootcount: add a DM SPI flash backing store for bootcount gpio: mxc_gpio: add support to read status of output gpios rtc: m41t62: reset SQW in m41t62_rtc_reset rtc: m41t62: add oscillator fail bit reset support imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL sysreset: Add poweroff-gpio driver board: ge: common: rename ge_common.c to ge_rtc.c board: ge: common: add config option for RTC and VPD feature board: ge: common: vpd: separate I2C specific code board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2 arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6dl-b1x5v2.dts | 654 ++++++++++++++++++++ arch/arm/mach-imx/mx6/Kconfig | 10 + arch/arm/mach-imx/mx6/clock.c | 2 +- board/ge/b1x5v2/Kconfig | 14 + board/ge/b1x5v2/Makefile | 6 + board/ge/b1x5v2/b1x5v2.c | 698 ++++++++++++++++++++++ board/ge/b1x5v2/spl.c | 587 ++++++++++++++++++ board/ge/bx50v3/Kconfig | 2 + board/ge/bx50v3/bx50v3.c | 4 +- board/ge/common/Kconfig | 7 + board/ge/common/Makefile | 3 +- board/ge/common/{ge_common.c => ge_rtc.c} | 0 board/ge/common/{ge_common.h => ge_rtc.h} | 0 board/ge/common/vpd_reader.c | 12 +- board/ge/common/vpd_reader.h | 23 +- board/ge/mx53ppd/Kconfig | 2 + board/ge/mx53ppd/mx53ppd.c | 4 +- configs/ge_b1x5v2_defconfig | 136 +++++ drivers/bootcount/Kconfig | 10 + drivers/bootcount/Makefile | 1 + drivers/bootcount/spi-flash.c | 125 ++++ drivers/gpio/mxc_gpio.c | 10 +- drivers/rtc/m41t62.c | 139 ++++- drivers/sysreset/Kconfig | 7 + drivers/sysreset/Makefile | 1 + drivers/sysreset/poweroff_gpio.c | 92 +++ include/configs/ge_b1x5v2.h | 127 ++++ 28 files changed, 2654 insertions(+), 23 deletions(-) create mode 100644 arch/arm/dts/imx6dl-b1x5v2.dts create mode 100644 board/ge/b1x5v2/Kconfig create mode 100644 board/ge/b1x5v2/Makefile create mode 100644 board/ge/b1x5v2/b1x5v2.c create mode 100644 board/ge/b1x5v2/spl.c create mode 100644 board/ge/common/Kconfig rename board/ge/common/{ge_common.c => ge_rtc.c} (100%) rename board/ge/common/{ge_common.h => ge_rtc.h} (100%) create mode 100644 configs/ge_b1x5v2_defconfig create mode 100644 drivers/bootcount/spi-flash.c create mode 100644 drivers/sysreset/poweroff_gpio.c create mode 100644 include/configs/ge_b1x5v2.h -- 2.28.0

2 11

[PATCH 0/4] efi_loader: validate device path length in boot manager
by Heinrich Schuchardt 23 Aug '20

23 Aug '20

Bootxxxx variables are provided by the user and therefore cannot be trusted. We have to validate them before usage. A device path provided by a Bootxxxx variable must have an end node within the indicated device path length. * Provide function efi_dp_check_length() to check the length of device paths. * Provide a unit test of the function. * Use the function in the boot manager to check device paths. Heinrich Schuchardt (4): include: kernel.h: define SSIZE_MAX efi_loader: efi_dp_check_length() test: unit test for efi_dp_check_length() efi_loader: validate device path length in boot manager include/efi_loader.h | 2 ++ include/linux/kernel.h | 3 ++ lib/efi_loader/efi_bootmgr.c | 6 ++-- lib/efi_loader/efi_device_path.c | 33 +++++++++++++++++++++ test/lib/Makefile | 1 + test/lib/efi_device_path.c | 50 ++++++++++++++++++++++++++++++++ 6 files changed, 91 insertions(+), 4 deletions(-) create mode 100644 test/lib/efi_device_path.c -- 2.28.0

1 4

[PATCH 1/1] dm: fix ofnode_read_addr/size_cells()
by Heinrich Schuchardt 23 Aug '20

23 Aug '20

In the case of the live tree ofnode_read_addr_cells() and ofnode_read_size_cells() return the #address-cells and #size-cells defined in the parent node. With the patch the same is done for a non-live tree. The only consumer of these functions is currently the CFI flash driver. This patch fixes the incorrect parsing of the device tree leading to 'saveenv' failing on qemu_arm64_defconfig. For testing qemu-system-aarch64 has to be called with -drive if=pflash,format=raw,index=1,file=envstore.img to provide the flash memory. envstore.img must be 64 MiB large. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- drivers/core/ofnode.c | 20 ++++++++++++++------ include/dm/read.h | 10 ++++++---- 2 files changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index c37afa1fe6..d02d8d33fe 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -776,18 +776,26 @@ int ofnode_read_pci_vendev(ofnode node, u16 *vendor, u16 *device) int ofnode_read_addr_cells(ofnode node) { - if (ofnode_is_np(node)) + if (ofnode_is_np(node)) { return of_n_addr_cells(ofnode_to_np(node)); - else /* NOTE: this call should walk up the parent stack */ - return fdt_address_cells(gd->fdt_blob, ofnode_to_offset(node)); + } else { + int parent = fdt_parent_offset(gd->fdt_blob, + ofnode_to_offset(node)); + + return fdt_address_cells(gd->fdt_blob, parent); + } } int ofnode_read_size_cells(ofnode node) { - if (ofnode_is_np(node)) + if (ofnode_is_np(node)) { return of_n_size_cells(ofnode_to_np(node)); - else /* NOTE: this call should walk up the parent stack */ - return fdt_size_cells(gd->fdt_blob, ofnode_to_offset(node)); + } else { + int parent = fdt_parent_offset(gd->fdt_blob, + ofnode_to_offset(node)); + + return fdt_size_cells(gd->fdt_blob, parent); + } } int ofnode_read_simple_addr_cells(ofnode node) diff --git a/include/dm/read.h b/include/dm/read.h index f02ec95954..3c7350beef 100644 --- a/include/dm/read.h +++ b/include/dm/read.h @@ -875,14 +875,16 @@ static inline int dev_count_phandle_with_args(const struct udevice *dev, static inline int dev_read_addr_cells(const struct udevice *dev) { - /* NOTE: this call should walk up the parent stack */ - return fdt_address_cells(gd->fdt_blob, dev_of_offset(dev)); + int parent = fdt_parent_offset(gd->fdt_blob, dev_of_offset(dev)); + + return fdt_address_cells(gd->fdt_blob, parent); } static inline int dev_read_size_cells(const struct udevice *dev) { - /* NOTE: this call should walk up the parent stack */ - return fdt_size_cells(gd->fdt_blob, dev_of_offset(dev)); + int parent = fdt_parent_offset(gd->fdt_blob, dev_of_offset(dev)); + + return fdt_size_cells(gd->fdt_blob, parent); } static inline int dev_read_simple_addr_cells(const struct udevice *dev) -- 2.27.0

3 3

[PATCH v5 0/5] cmd: bind allow to bind driver with driver_data
by Patrice Chotard 23 Aug '20

23 Aug '20

- fix the bind command - add a bind command test - add bind command documentation Changes in v5: - rebase on last master - fix phy test regression Changes in v4: - fix make htmldocs error "Title underline too short" Changes in v3: - fix typo - fix typo - fix typo - add bind/unbind parameters description and how to find them Changes in v2: - add a bind command test - add bind command documentation in doc/driver/model/bind.rst - simplify patch 1 by using lists_bind_fdt() Patrice Chotard (5): cmd: bind: allow to bind driver with driver data sandbox: phy: add driver_data for bind test cmd sandbox: dts: Add compatible string for bind-test node test/py: Update test_bind doc: add bind/unbind command documentation arch/sandbox/dts/test.dts | 1 + cmd/bind.c | 5 ++-- doc/driver-model/bind.rst | 49 ++++++++++++++++++++++++++++++++++++++ doc/driver-model/index.rst | 1 + drivers/phy/sandbox-phy.c | 18 +++++++++++++- test/dm/phy.c | 2 +- test/py/tests/test_bind.py | 18 +++++++------- 7 files changed, 81 insertions(+), 13 deletions(-) create mode 100644 doc/driver-model/bind.rst -- 2.17.1

2 12

[PATCH v2] dtoc: add coverage test for unicode error
by Walter Lozano 23 Aug '20

23 Aug '20

Add an additional test to dtoc in order improve the coverage, specifically to take into account the case of unicode error when scanning drivers. Signed-off-by: Walter Lozano <walter.lozano(a)collabora.com> --- Changes in v2: - Add missing files - Extend scan_drivers to use both relative and absolute paths tools/dtoc/dtb_platdata.py | 18 +++++++++++++++--- tools/dtoc/dtoc_test_scan_drivers.cxx | 1 + tools/dtoc/test_dtoc.py | 26 ++++++++++++++++++++++++++ 3 files changed, 42 insertions(+), 3 deletions(-) create mode 100644 tools/dtoc/dtoc_test_scan_drivers.cxx diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index c28768f4a2..f870ebdb78 100644 --- a/tools/dtoc/dtb_platdata.py +++ b/tools/dtoc/dtb_platdata.py @@ -145,8 +145,10 @@ class DtbPlatdata(object): U_BOOT_DRIVER_ALIAS(driver_alias, driver_name) value: Driver name declared with U_BOOT_DRIVER(driver_name) _links: List of links to be included in dm_populate_phandle_data() + _drivers_additional: List of additional drivers to use during scanning """ - def __init__(self, dtb_fname, include_disabled, warning_disabled): + def __init__(self, dtb_fname, include_disabled, warning_disabled, + drivers_additional=[]): self._fdt = None self._dtb_fname = dtb_fname self._valid_nodes = None @@ -157,6 +159,7 @@ class DtbPlatdata(object): self._drivers = [] self._driver_aliases = {} self._links = [] + self._drivers_additional = drivers_additional def get_normalized_compat_name(self, node): """Get a node's normalized compat name @@ -338,6 +341,14 @@ class DtbPlatdata(object): continue self.scan_driver(dirpath + '/' + fn) + for fn in self._drivers_additional: + if not isinstance(fn, str) or len(fn) == 0: + continue + if fn[0] == '/': + self.scan_driver(fn) + else: + self.scan_driver(basedir + '/' + fn) + def scan_dtb(self): """Scan the device tree to obtain a tree of nodes and properties @@ -654,7 +665,8 @@ class DtbPlatdata(object): self.out(''.join(self.get_buf())) -def run_steps(args, dtb_file, include_disabled, output, warning_disabled=False): +def run_steps(args, dtb_file, include_disabled, output, warning_disabled=False, + drivers_additional=[]): """Run all the steps of the dtoc tool Args: @@ -666,7 +678,7 @@ def run_steps(args, dtb_file, include_disabled, output, warning_disabled=False): if not args: raise ValueError('Please specify a command: struct, platdata') - plat = DtbPlatdata(dtb_file, include_disabled, warning_disabled) + plat = DtbPlatdata(dtb_file, include_disabled, warning_disabled, drivers_additional) plat.scan_drivers() plat.scan_dtb() plat.scan_tree() diff --git a/tools/dtoc/dtoc_test_scan_drivers.cxx b/tools/dtoc/dtoc_test_scan_drivers.cxx new file mode 100644 index 0000000000..557c692ba2 --- /dev/null +++ b/tools/dtoc/dtoc_test_scan_drivers.cxx @@ -0,0 +1 @@ +U_BOOT_DRIVER_ALIAS(sandbox_gpio, sandbox_gpio_alias2) diff --git a/tools/dtoc/test_dtoc.py b/tools/dtoc/test_dtoc.py index 169ecd6e6e..f1b0eb824a 100755 --- a/tools/dtoc/test_dtoc.py +++ b/tools/dtoc/test_dtoc.py @@ -13,6 +13,7 @@ import collections import os import struct import sys +import tempfile import unittest from dtoc import dtb_platdata @@ -829,3 +830,28 @@ U_BOOT_DEVICE(spl_test2) = { self.run_test(['invalid-cmd'], dtb_file, output) self.assertIn("Unknown command 'invalid-cmd': (use: struct, platdata)", str(e.exception)) + + def testScanDrivers(self): + """Test running dtoc with additional drivers to scan""" + dtb_file = get_dtb_file('dtoc_test_simple.dts') + output = tools.GetOutputFilename('output') + with test_util.capture_sys_output() as (stdout, stderr): + dtb_platdata.run_steps(['struct'], dtb_file, False, output, True, + [None, '', 'tools/dtoc/dtoc_test_scan_drivers.cxx']) + + def testUnicodeError(self): + """Test running dtoc with an invalid unicode file + + To be able to perform this test without adding a weird text file which + would produce issues when using checkpatch.pl or patman, generate the + file at runtime and then process it. + """ + dtb_file = get_dtb_file('dtoc_test_simple.dts') + output = tools.GetOutputFilename('output') + driver_fn = '/tmp/' + next(tempfile._get_candidate_names()) + with open(driver_fn, 'wb+') as df: + df.write(b'\x81') + + with test_util.capture_sys_output() as (stdout, stderr): + dtb_platdata.run_steps(['struct'], dtb_file, False, output, True, + [driver_fn]) -- 2.20.1

2 1