April 2020 - U-Boot

imx8qxp mek: Booting mainline kernel with mainline U-Boot
by Fabio Estevam 12 Jun '21

12 Jun '21

Hi Peng, Have you managed to boot a mainline kernel with mainline U-Boot on a imx8qxp mek? Here is what I get: U-Boot SPL 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46800 U-Boot 2020.01-00369-ge80a8b0222-dirty (Jan 13 2020 - 12:30:21 -0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 32C Model: Freescale i.MX8QXP MEK Board: iMX8QXP MEK Build: SCFW 550f3079, SECO-FW d7523fe8, ATF 70fa7bc Boot: SD1 DRAM: 3 GiB Failed to enable ipg clk MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Failed to enable ipg clk Warning: ethernet@5b040000 (eth0) using random MAC address - e2:9c:db:94:fc:d5 eth0: ethernet@5b040000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device 26221056 bytes read in 1134 ms (22.1 MiB/s) Booting from mmc ... 13953 bytes read in 14 ms (972.7 KiB/s) ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 0000000083000000, end 0000000083006680 Starting kernel ... [It hangs here] Booting a NXP kernel also did not work. Any ideas? Regards, Fabio Estevam

8 17

[PATCH 0/8] net: several updates to support i.MX
by Peng Fan 05 May '21

05 May '21

The patchset is to upstream NXP downstream network patches that runs on i.MX platforms, including eqos update, sharded mdio support, mac addr accessing and etc. Fugang Duan (3): net: phy: realtek: add rx delay support for RTL8211F net: dwc_eth_qos: add dwc eqos for imx support net: eqos: implement callbaks to get interface and set txclk rate Peng Fan (1): net: eth-uclass: add return value check Ye Li (4): net: Add eth phy generic driver for shared MDIO net: Update eQos driver and FEC driver to use eth phy interfaces fec: Move imx_get_mac_from_fuse declare to imx file eQos: Implement the read_rom_hwaddr callback arch/arm/include/asm/mach-imx/sys_proto.h | 2 + drivers/net/Kconfig | 6 + drivers/net/Makefile | 1 + drivers/net/dwc_eth_qos.c | 284 +++++++++++++++++++++++++++--- drivers/net/eth-phy-uclass.c | 123 +++++++++++++ drivers/net/fec_mxc.c | 16 +- drivers/net/fec_mxc.h | 2 - drivers/net/phy/realtek.c | 11 ++ include/dm/uclass-id.h | 1 + include/eth_phy.h | 17 ++ net/eth-uclass.c | 17 +- 11 files changed, 446 insertions(+), 34 deletions(-) create mode 100644 drivers/net/eth-phy-uclass.c create mode 100644 include/eth_phy.h -- 2.16.4

2 9

sunxi_nand_spl reading zeros on NextThing C.H.I.P.
by Yevhenii Hrabliuk 02 May '21

02 May '21

Hello, I'm trying to get latest U-Boot to work on the NextThing C.H.I.P. After borrowing NFC config from the Chip Pro .dts, I can write the SPL to NAND after loading U-Boot via sunxi-fel and the bootrom will pick it up fine. So the "full" sunxi_nand.c works. SPL's sunxi_nand_spl.c appears to read all zeros however - I checked by adding prints in spl.c/jump_to_image_no_args(). Can someone please suggest possible things to try to make it work? I tried tinkering with the settings but I have no idea if that's even the issue. The NAND is a Toshiba "TC58TEG5DCLTA00"; NTC's settings for it are presumably [1] and sunxi_nand_spl.c autodetects the following settings: page_size:16384 ecc_strength:4 ecc_size:1024 addr_cycles:5 nseeds:8 randomize:0 Thanks. [1]: https://raw.githubusercontent.com/nextthingco/chip-nand-scripts/master/nand…

2 2

[RFC PATCH 1/3] net: phy: Add a generic phy file for TI generic PHYs
by Dan Murphy 27 Apr '21

27 Apr '21

Add a TI Generic init file that will initialize TI PHYs that follow that not require special handling. These PHYs can connect with the standard MII register set. This generice file will register the PHY IDs and names of the PHYs so when the command 'mdio list' is executed the PHY name will display as opposed to 'Generic PHY'. The DP8382X PHY series is a generic PHY that requires the generic registration. The DP83867 driver was updated to rename the init to a more PHY specific init call. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> --- configs/am65x_evm_a53_defconfig | 2 +- configs/am65x_hs_evm_a53_defconfig | 2 +- configs/dra7xx_evm_defconfig | 2 +- configs/dra7xx_hs_evm_defconfig | 2 +- configs/dra7xx_hs_evm_usb_defconfig | 2 +- configs/j721e_evm_a72_defconfig | 2 +- configs/j721e_hs_evm_a72_defconfig | 2 +- configs/k2g_evm_defconfig | 2 +- configs/xilinx_versal_virt_defconfig | 2 +- configs/xilinx_zynqmp_virt_defconfig | 2 +- drivers/net/phy/Kconfig | 8 ++ drivers/net/phy/Makefile | 3 +- drivers/net/phy/dp83867.c | 3 +- drivers/net/phy/ti_phy_init.c | 106 +++++++++++++++++++++++++++ drivers/net/phy/ti_phy_init.h | 16 ++++ 15 files changed, 144 insertions(+), 12 deletions(-) create mode 100644 drivers/net/phy/ti_phy_init.c create mode 100644 drivers/net/phy/ti_phy_init.h diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index 542bbd992c53..7051d6c40505 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -101,7 +101,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_E1000=y diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig index 9f43cee39611..29da3826f12a 100644 --- a/configs/am65x_hs_evm_a53_defconfig +++ b/configs/am65x_hs_evm_a53_defconfig @@ -103,7 +103,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_E1000=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 4d765da4e052..19c024889155 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -86,7 +86,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index c25d4ce5c142..e97f1a3ba338 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -89,7 +89,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 8e74496b2ccd..46970e31f02e 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -87,7 +87,7 @@ CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=76800000 CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_MII=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index e9e82bb4309d..784a6ff396c3 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -124,7 +124,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_TI_AM65_CPSW_NUSS=y diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig index a723e2718e5e..dd93a955cefd 100644 --- a/configs/j721e_hs_evm_a72_defconfig +++ b/configs/j721e_hs_evm_a72_defconfig @@ -114,7 +114,7 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y CONFIG_TI_AM65_CPSW_NUSS=y diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 5abf5faa450e..f47b1cabe9a8 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -58,7 +58,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_MARVELL=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_KEYSTONE_NET=y diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index e8c349261207..eb2a26bc2c7d 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -61,7 +61,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_MARVELL=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_VITESSE=y CONFIG_PHY_FIXED=y CONFIG_PHY_GIGE=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 7b09edd78e1b..5c320f93fe5f 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -101,7 +101,7 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_PHY_NATSEMI=y CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y +CONFIG_PHY_DP83867=y CONFIG_PHY_VITESSE=y CONFIG_PHY_XILINX_GMII2RGMII=y CONFIG_PHY_FIXED=y diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d1f049e62ab7..e366f10afc59 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -244,6 +244,14 @@ config PHY_TERANETICS config PHY_TI bool "Texas Instruments Ethernet PHYs support" +config PHY_TI_GENERIC + select PHY_TI + bool "Texas Instruments Ethernet PHYs support" + +config PHY_DP83867 + select PHY_TI + bool "Texas Instruments Ethernet DP83867 PHY support" + config PHY_VITESSE bool "Vitesse Ethernet PHYs support" diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 1d81516ecd1d..9c6d31718c00 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -25,7 +25,8 @@ obj-$(CONFIG_PHY_NATSEMI) += natsemi.o obj-$(CONFIG_PHY_REALTEK) += realtek.o obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.o -obj-$(CONFIG_PHY_TI) += dp83867.o +obj-$(CONFIG_PHY_TI) += ti_phy_init.o +obj-$(CONFIG_PHY_DP83867) += dp83867.o obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o obj-$(CONFIG_PHY_VITESSE) += vitesse.o diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 50804c130efd..c9ed4a44d4db 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -12,6 +12,7 @@ #include <dm.h> #include <dt-bindings/net/ti-dp83867.h> +#include "ti_phy_init.h" /* TI DP83867 */ #define DP83867_DEVADDR 0x1f @@ -428,7 +429,7 @@ static struct phy_driver DP83867_driver = { .shutdown = &genphy_shutdown, }; -int phy_ti_init(void) +int phy_dp83867_init(void) { phy_register(&DP83867_driver); return 0; diff --git a/drivers/net/phy/ti_phy_init.c b/drivers/net/phy/ti_phy_init.c new file mode 100644 index 000000000000..11c4c166b2f5 --- /dev/null +++ b/drivers/net/phy/ti_phy_init.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI Generic PHY Init to register all TI Ethernet PHYs + * + * Author: Dan Murphy <dmurphy(a)ti.com> + * + * Copyright (C) 2019 Texas Instruments Inc. + */ + +#include <phy.h> + +#define DP83822_PHY_ID 0x2000a240 +#define DP83825S_PHY_ID 0x2000a140 +#define DP83825I_PHY_ID 0x2000a150 +#define DP83825CM_PHY_ID 0x2000a160 +#define DP83825CS_PHY_ID 0x2000a170 +#define DP83826C_PHY_ID 0x2000a130 +#define DP83826NC_PHY_ID 0x2000a110 + +static struct phy_driver dp83822_driver = { + .name = "TI DP83822", + .uid = DP83822_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825s_driver = { + .name = "TI DP83825S", + .uid = DP83825S_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825i_driver = { + .name = "TI DP83825I", + .uid = DP83825I_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825m_driver = { + .name = "TI DP83825M", + .uid = DP83825CM_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83825cs_driver = { + .name = "TI DP83825CS", + .uid = DP83825CS_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver dp83826c_driver = { + .name = "TI DP83826C", + .uid = DP83826C_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; +static struct phy_driver dp83826nc_driver = { + .name = "TI DP83826NC", + .uid = DP83826NC_PHY_ID, + .mask = 0xfffffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_ti_init(void) +{ +#ifdef CONFIG_PHY_DP83867 + phy_dp83867_init(); +#endif + +#ifdef CONFIG_PHY_TI_GENERIC + phy_register(&dp83822_driver); + phy_register(&dp83825s_driver); + phy_register(&dp83825i_driver); + phy_register(&dp83825m_driver); + phy_register(&dp83825cs_driver); + phy_register(&dp83826c_driver); + phy_register(&dp83826nc_driver); +#endif + + return 0; +} diff --git a/drivers/net/phy/ti_phy_init.h b/drivers/net/phy/ti_phy_init.h new file mode 100644 index 000000000000..309da2aacccb --- /dev/null +++ b/drivers/net/phy/ti_phy_init.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * TI Generic Ethernet PHY + * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c + * + * Author: Dan Murphy <dmurphy(a)ti.com> + * + * Copyright (C) 2019 Texas Instruments Inc. + */ + +#ifndef _TI_GEN_PHY_H +#define _TI_GEN_PHY_H + +int phy_dp83867_init(void); + +#endif /* _TI_GEN_PHY_H */ -- 2.25.1

4 14

[PATCH V4 00/13] net: smc911x: Convert to DM
by Marek Vasut 04 Mar '21

04 Mar '21

Perform DM conversion of the SMC911x driver. Note that the DT compatible is set only for 9115 , so this might need to be changed. Marek Vasut (13): net: smc911x: Remove pkt_data_{push,pull} net: smc911x: Replace malloc()+memset() with calloc() net: smc911x: Rename smc911x_rx() to smc911x_recv() net: smc911x: Invert the logic in smc911x_miiphy_{read,write}() net: smc911x: Fix potential memleak() in init fail path net: smc911x: Pull MII registration into separate function net: smc911x: Inline all functions from header file net: smc911x: Drop weak alias from 32bit accessors net: smc911x: Convert IO accessors to {read,write}{w,l}() net: smc911x: Pass around driver private data net: smc911x: Clean up the status handling in smc911x_recv() net: smc911x: Split non-DM specific bits from common code net: smc911x: Add DM support drivers/net/Kconfig | 2 + drivers/net/smc911x.c | 559 +++++++++++++++++++++------ drivers/net/smc911x.h | 157 -------- examples/standalone/Makefile | 5 +- examples/standalone/smc911x_eeprom.c | 150 +++++++ 5 files changed, 602 insertions(+), 271 deletions(-) Cc: Joe Hershberger <joe.hershberger(a)ni.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> -- 2.25.1

3 24

[PATCH] mpc8379erdb: Convert to DM_MMC
by sinan＠writeme.com 22 Feb '21

22 Feb '21

From: Sinan Akman <sinan(a)writeme.com> Signed-off-by: Sinan Akman <sinan(a)writeme.com> Cc: mario.six(a)gdsys.cc --- arch/powerpc/dts/Makefile | 1 + arch/powerpc/dts/mpc8379erdb.dts | 239 ++++++++++++++++++++++++++++++ board/freescale/mpc837xerdb/mpc837xerdb.c | 9 +- configs/MPC837XERDB_defconfig | 5 +- 4 files changed, 252 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/dts/mpc8379erdb.dts diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index 3195351c9c..e3ec033096 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ +dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb diff --git a/arch/powerpc/dts/mpc8379erdb.dts b/arch/powerpc/dts/mpc8379erdb.dts new file mode 100644 index 0000000000..33afaf9a94 --- /dev/null +++ b/arch/powerpc/dts/mpc8379erdb.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * MPC8379E RDB Device Tree Source + * + * Copyright 2020 NXP + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8379erdb"; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio0: gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + sdhc@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + bus-width = <0x4>; + clock-frequency = <0>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy2 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + }; + +}; diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 45038acf32..9321952674 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -136,8 +136,8 @@ int checkboard(void) int board_early_init_f(void) { -#ifdef CONFIG_FSL_SERDES immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_SERDES u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ @@ -164,10 +164,16 @@ int board_early_init_f(void) break; } #endif /* CONFIG_FSL_SERDES */ + +#ifdef CONFIG_FSL_ESDHC + clrsetbits_be32(&immr->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD); + clrsetbits_be32(&immr->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD); +#endif return 0; } #ifdef CONFIG_FSL_ESDHC +#if !(CONFIG_IS_ENABLED(DM_MMC)) int board_mmc_init(bd_t *bd) { struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; @@ -186,6 +192,7 @@ int board_mmc_init(bd_t *bd) return fsl_esdhc_mmc_init(bd); } #endif +#endif /* * Miscellaneous late-boot configurations diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index fd8335ee4e..8ef193a6e5 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -160,7 +160,11 @@ CONFIG_CMD_PING=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb" CONFIG_ENV_ADDR=0xFE080000 +CONFIG_DM=y +CONFIG_DM_MMC=y CONFIG_FSL_SATA=y CONFIG_FSL_ESDHC=y CONFIG_MTD_NOR_FLASH=y @@ -174,4 +178,3 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y -- 2.14.5

4 6

[PATCH v1] doc: README.distro: Special case with Windows formatted disk
by Andy Shevchenko 30 Jan '21

30 Jan '21

If someone wants to use shared (by installed OS) eMMC partition to the Windows to boot from, it's not possible due to U-Boot limitations. Describe this case and possible workaround. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- doc/README.distro | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/doc/README.distro b/doc/README.distro index ab6e6f4e74..807a82c910 100644 --- a/doc/README.distro +++ b/doc/README.distro @@ -405,3 +405,23 @@ of the boot environment and are not guaranteed to exist or work in the same way in future u-boot versions. In particular the <device type>_boot variables (e.g. mmc_boot, usb_boot) are a strictly internal implementation detail and must not be used as a public interface. + +Using a eMMC partition that has been formatted as a disk by Windows 10 +====================================================================== + +Let's assume we have an (embedded) board with U-Boot and Linux OS +installed on eMMC. Linux OS shares one of the eMMC partitions as +a disk via USB Mass Storage protocol. + +It may be useful to utilize that disk to copy bootable files from +Windows machine to the board in case someone doesn't want to erase +stock installation on it. + +Unfortunately, Windows 10 doesn't provide knobs and always formats +that disk as a whole, meaning that it creates a partition table on it +with requested (FAT) partition. As a result U-Boot may not see any +files on it due to nesting partition tables. + +The workaround may be in formatting the partition under Linux OS, +setting up a network connection between Linux OS and Windows 10 and +use it to copy files to the partition. -- 2.24.1

5 10

[PATCH 00/16] efi_loader: non-volatile and runtime variables
by Heinrich Schuchardt 02 Jan '21

02 Jan '21

Up to UEFI variable where stored in U-Boot environment variables. Saving UEFI variables was not possible without saving the U-Boot environment variables. With this patch series file ubootefi.var in the EFI system partition is used for saving UEFI variables. Furthermore the UEFI variables are exposed at runtime and are writable at runtime. The missing piece is transferring the variable changed at runtime back to the firmware. I will evaluate the following options: * using a fixed memory address: we could read the memory area after a reboot * using a systemd service which is called before the system goes down Many of the CCs are due to the changes in disk/part_efi.c. Here the logic to detect the EFI system partition is introduced (patch 04/16). Heinrich Schuchardt (16): cmd: efidebug: fix int to pointer cast efi_loader: only reserve memory if fdt node enabled efi_loader: eliminate EFI_CALL() for variable access part: detect EFI system partition efi_loader: identify EFI system partition efi_loader: keep attributes in efi_set_variable_int() efi_loader: export initialization state efi_loader: change setup sequence efi_loader: imply FAT, FAT_WRITE efi_loader: UEFI variable persistence efi_loader: export efi_convert_pointer() efi_loader: optional pointer for ConvertPointer efi_loader: memory buffer for variables efi_loader: use memory based variable storage efi_loader: enable UEFI variables at runtime efi_selftest: adjust runtime test for variables cmd/bootefi.c | 3 +- cmd/efidebug.c | 71 +- cmd/nvedit_efi.c | 18 +- disk/part_dos.c | 10 +- disk/part_efi.c | 12 +- include/efi_api.h | 2 + include/efi_loader.h | 22 + include/efi_variable.h | 52 ++ include/part.h | 11 +- lib/efi_loader/Kconfig | 10 + lib/efi_loader/Makefile | 2 + lib/efi_loader/efi_bootmgr.c | 20 +- lib/efi_loader/efi_disk.c | 20 + lib/efi_loader/efi_runtime.c | 20 +- lib/efi_loader/efi_setup.c | 54 +- lib/efi_loader/efi_variable.c | 635 ++++++------------ lib/efi_loader/efi_variables_file.c | 235 +++++++ lib/efi_loader/efi_variables_mem.c | 324 +++++++++ .../efi_selftest_variables_runtime.c | 47 +- 19 files changed, 1037 insertions(+), 531 deletions(-) create mode 100644 include/efi_variable.h create mode 100644 lib/efi_loader/efi_variables_file.c create mode 100644 lib/efi_loader/efi_variables_mem.c -- 2.25.1

7 52

[PATCH v1 1/2] imx: imx8qm_rom7720: added missing USDHC Base address defines
by Oliver Graute 06 Dec '20

06 Dec '20

Added missing USDHC Base address defines Signed-off-by: Oliver Graute <oliver.graute(a)kococonnector.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Fabio Estevam <festevam(a)gmail.com> Cc: Peng Fan <peng.fan(a)nxp.com> Cc: Simon Glass <sjg(a)chromium.org> Cc: Ye Li <ye.li(a)nxp.com> Cc: uboot-imx <uboot-imx(a)nxp.com> --- include/configs/imx8qm_rom7720.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 865863eb7c..8e1427da8a 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -18,6 +18,10 @@ #define CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5B010000 +#define USDHC2_BASE_ADDR 0x5B020000 +#define USDHC3_BASE_ADDR 0x5B030000 + #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_ENV_OVERWRITE -- 2.17.1

4 6

[U-Boot] [PATCH] cmd: pxe: Use internal FDT if external one cannot be retrieved
by Anton Leontiev 02 Dec '20

02 Dec '20

From: Anton Leontiev <aleontiev(a)elvees.com> Original commit c61d94d86035 ("pxe: implement fdtdir extlinux.conf tag") states, that if FDT file cannot be retrieved then FDT packaged in firmware should be used. If FDT file cannot be retrieved and it is specified explicitly using FDT keyword then the label is skipped. If it cannot be found in FDTDIR then internal FDT is tried first. Signed-off-by: Anton Leontiev <aleontiev(a)elvees.com> --- cmd/pxe.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/cmd/pxe.c b/cmd/pxe.c index 2059975446..28390c114c 100644 --- a/cmd/pxe.c +++ b/cmd/pxe.c @@ -795,9 +795,13 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) int err = get_relfile_envaddr(cmdtp, fdtfile, "fdt_addr_r"); free(fdtfilefree); if (err < 0) { - printf("Skipping %s for failure retrieving fdt\n", - label->name); - goto cleanup; + bootm_argv[3] = NULL; + + if (label->fdt) { + printf("Skipping %s for failure retrieving FDT\n", + label->name); + goto cleanup; + } } } else { bootm_argv[3] = NULL; -- 2.22.1

3 10