November 2020 - U-Boot

[PATCH] usb: eth: lan78xx: Fix logic in lan78xx_read_otp() to avoid a warning
by Tom Rini 20 Jun '23

20 Jun '23

In lan78xx_read_otp() we want to know if sig is LAN78XX_OTP_INDICATOR_1 or LAN78XX_OTP_INDICATOR_2. In the case of matching the first one we set offset to itself, and clang warns about this. Rework the logic so that if sig is the second indicator we adjust the offset as today and if it does not match the first indicator we return -EINVAL Cc: Marek Vasut <marex(a)denx.de> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- drivers/usb/eth/lan78xx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/eth/lan78xx.c b/drivers/usb/eth/lan78xx.c index e34ad2603fbb..d147412990de 100644 --- a/drivers/usb/eth/lan78xx.c +++ b/drivers/usb/eth/lan78xx.c @@ -146,11 +146,9 @@ static int lan78xx_read_otp(struct usb_device *udev, u32 offset, ret = lan78xx_read_raw_otp(udev, 0, 1, &sig); if (!ret) { - if (sig == LAN78XX_OTP_INDICATOR_1) - offset = offset; - else if (sig == LAN78XX_OTP_INDICATOR_2) + if (sig == LAN78XX_OTP_INDICATOR_2) offset += 0x100; - else + else if (sig != LAN78XX_OTP_INDICATOR_1) return -EINVAL; ret = lan78xx_read_raw_otp(udev, offset, length, data); if (ret) -- 2.17.1

2 2

[PATCH] RFC: nvedit: support doing one (extra) expansion of the value in "env set"
by Rasmus Villemoes 02 Feb '23

02 Feb '23

Currently, there's no way to fetch the value of an environment variable whose name is stored in some other variable, or generated from such - in non-working pseudo-code, ${${varname}} ${array${index}} This forces some scripts to needlessly duplicate logic and hardcode assumptions. For example, in an A/B scheme with three variables BOOT_ORDER # Either "A B" or "B A" depending on which slot was last updated BOOT_A_LEFT # 0..3 BOOT_B_LEFT # 0..3 when one needs to determine the slot to boot from, one does something like setenv found for slot in $BOOT_ORDER ; do if test "x$found" != "x" ; then # work around lack of break elif test "x$slot" = "xA" ; then if test $BOOT_A_LEFT -gt 0 ; then setexpr BOOT_A_LEFT $BOOT_A_LEFT - 1 setenv found A setenv bootargs ${bootargs_A} setenv ubivol ${ubivol_A} # more setup based on A fi elif test "x$slot" = "xB" ; then if test $BOOT_B_LEFT -gt 0 ; then # the same ... fi fi done This is already bad enough, but extending that to A/B/C is tedious and prone to copy-pastos. So this is an attempt at allowing one to do "env set -E var value1 value2" with the effect that, of course, normal variable expansion happens on the command line, the valueX are joined with spaces as usual, and then one more pass is done over that string replacing occurrences of ${foo}. The above would become setenv found for slot in $BOOT_ORDER ; do if test "x$found" != "x" ; then # work around lack of break else env set -E boot_left "\${BOOT_${slot}_LEFT}" if test $boot_left -gt 0 ; then setexpr BOOT_${slot}_LEFT $boot_left - 1 env set found $slot env set -E bootargs "\${bootargs_${slot}}" env set -E ubivol "\${ubivol_${slot}}" fi fi done I'm pleasantly surprised it was that easy to implement, but of course I'm cheating a bit (cli_simple_process_macros is only available if CONFIG_CMDLINE, though I think cli_simple.o could be unconditionally built and then link-time GC should get rid of the excess functions). This has been lightly tested in the sandbox. I'll add some proper unit tests, update the help texts and try to handle the Kconfig issue if this is something that might be accepted. Signed-off-by: Rasmus Villemoes <rasmus.villemoes(a)prevas.dk> --- cmd/nvedit.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/cmd/nvedit.c b/cmd/nvedit.c index 81d94cd193..ff6ffcb674 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -224,7 +224,7 @@ DONE: */ static int _do_env_set(int flag, int argc, char * const argv[], int env_flag) { - int i, len; + int i, len, expand = 0; char *name, *value, *s; struct env_entry e, *ep; @@ -244,6 +244,9 @@ static int _do_env_set(int flag, int argc, char * const argv[], int env_flag) case 'f': /* force */ env_flag |= H_FORCE; break; + case 'E': + expand = 1; + break; default: return CMD_RET_USAGE; } @@ -287,6 +290,18 @@ static int _do_env_set(int flag, int argc, char * const argv[], int env_flag) if (s != value) *--s = '\0'; + if (expand) { + char *expanded = malloc(CONFIG_SYS_CBSIZE); + + if (expanded == NULL) { + printf("## Can't malloc %d bytes\n", CONFIG_SYS_CBSIZE); + free(value); + return 1; + } + cli_simple_process_macros(value, expanded); + free(value); + value = expanded; + } e.key = name; e.data = value; hsearch_r(e, ENV_ENTER, &ep, &env_htab, env_flag); -- 2.23.0

5 20

kwboot : bug when board stops acking
by SC 06 Jan '23

06 Jan '23

Hi list, I think there's a bug in kwboot. I have a faulty board that stops acking xmodem frames after a certain number of packets and kwboot instead of exiting continues to send frames up to 100%. With the one second retry timer it's very long! More than 2 hours :-( The bug is in the kwboot_xm_sendblock() fonction : https://gitlab.denx.de/u-boot/u-boot/blob/master/tools/kwboot.c#L375 kwboot_tty_recv detects the timeout but the return value is based on the last character received (line 403) The variable c is not initialized so if it keeps the previous value which is ACK => rc=0 => infinite loop There are several ways to fix the bug: * Surround the "switch(c)" with a test: if ( !((rc == -1) && (errno == ETIMEDOUT)) ) { rc = -1; switch (c) { case ACK: rc = 0; break; case NAK: errno = EBADMSG; break; case CAN: errno = ECANCELED; break; default: errno = EPROTO; break; } } return rc; * In the case of a TIMEOUT set c to a specific value and add the case in the switch Do you agree with my diagnosis? What is the best solution to fix this bug? Should I provide a patch? Thank you, Stephane

3 2

Netgear RN102 U-Boot Nand Driver Modification
by Abdus Rainey 06 Jan '23

06 Jan '23

I have recently modded a Netgear RN102 NAND flash from 128 MB to 4096 MB (Samsung k9gbg08u0a) but i have a problem with NAND initialization. I can boot with kwboot which is unique for Armada CPU's. Here is my log from kwboot with my stock mtd0: root@whitepawnxeon:/home/jigsaw/Downloads# kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0stockuboot.img -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [......................................................................] 0 % [......................................................................] 1 % [......................................................................] 1 % [......................................................................] 2 % [......................................................................] 2 % [......................................................................] 3 % [......................................................................] 3 % [......................................................................] 4 % [......................................................................] 5 % [......... General initialization - Version: 1.0.0 High speed PHY - Version: 2.1.4 (COM-PHY-V20) Update PEX Device ID 0x6710 High speed PHY - Ended Successfully 0000 DDR3 Training Sequence - Ver 5.7.1 DDR3 Training Sequence - Run without PBS. DDR3 Training Sequence - Ended Successfully .............................................................] 5 % [......................................................................] 6 % [......................................................................] 6 % [......................................................................] 7 % [......................................................................] 7 % [......................................................................] 8 % [......................................................................] 9 % [......................................................................] 9 % [......................................................................] 10 % [......................................................................] 10 % [......................................................................] 11 % [......................................................................] 11 % [......................................................................] 12 % [......................................................................] 13 % [......................................................................] 13 % [......................................................................] 14 % [......................................................................] 14 % [......................................................................] 15 % [......................................................................] 15 % [......................................................................] 16 % [......................................................................] 17 % [......................................................................] 17 % [......................................................................] 18 % [......................................................................] 18 % [......................................................................] 19 % [......................................................................] 19 % [......................................................................] 20 % [......................................................................] 21 % [......................................................................] 21 % [......................................................................] 22 % [......................................................................] 22 % [......................................................................] 23 % [......................................................................] 23 % [......................................................................] 24 % [......................................................................] 25 % [......................................................................] 25 % [......................................................................] 26 % [......................................................................] 26 % [......................................................................] 27 % [......................................................................] 27 % [......................................................................] 28 % [......................................................................] 29 % [......................................................................] 29 % [......................................................................] 30 % [......................................................................] 30 % [......................................................................] 31 % [......................................................................] 31 % [......................................................................] 32 % [......................................................................] 33 % [......................................................................] 33 % [......................................................................] 34 % [......................................................................] 34 % [......................................................................] 35 % [......................................................................] 35 % [......................................................................] 36 % [......................................................................] 37 % [......................................................................] 37 % [......................................................................] 38 % [......................................................................] 38 % [......................................................................] 39 % [......................................................................] 39 % [......................................................................] 40 % [......................................................................] 41 % [......................................................................] 41 % [......................................................................] 42 % [......................................................................] 42 % [......................................................................] 43 % [......................................................................] 43 % [......................................................................] 44 % [......................................................................] 45 % [......................................................................] 45 % [......................................................................] 46 % [......................................................................] 46 % [......................................................................] 47 % [......................................................................] 47 % [......................................................................] 48 % [......................................................................] 48 % [......................................................................] 49 % [......................................................................] 50 % [......................................................................] 50 % [......................................................................] 51 % [......................................................................] 51 % [......................................................................] 52 % [......................................................................] 52 % [......................................................................] 53 % [......................................................................] 54 % [......................................................................] 54 % [......................................................................] 55 % [......................................................................] 55 % [......................................................................] 56 % [......................................................................] 56 % [......................................................................] 57 % [......................................................................] 58 % [......................................................................] 58 % [......................................................................] 59 % [......................................................................] 59 % [......................................................................] 60 % [......................................................................] 60 % [......................................................................] 61 % [......................................................................] 62 % [......................................................................] 62 % [......................................................................] 63 % [......................................................................] 63 % [......................................................................] 64 % [......................................................................] 64 % [......................................................................] 65 % [......................................................................] 66 % [......................................................................] 66 % [......................................................................] 67 % [......................................................................] 67 % [......................................................................] 68 % [......................................................................] 68 % [......................................................................] 69 % [......................................................................] 70 % [......................................................................] 70 % [......................................................................] 71 % [......................................................................] 71 % [......................................................................] 72 % [......................................................................] 72 % [......................................................................] 73 % [......................................................................] 74 % [......................................................................] 74 % [......................................................................] 75 % [......................................................................] 75 % [......................................................................] 76 % [......................................................................] 76 % [......................................................................] 77 % [......................................................................] 78 % [......................................................................] 78 % [......................................................................] 79 % [......................................................................] 79 % [......................................................................] 80 % [......................................................................] 80 % [......................................................................] 81 % [......................................................................] 82 % [......................................................................] 82 % [......................................................................] 83 % [......................................................................] 83 % [......................................................................] 84 % [......................................................................] 84 % [......................................................................] 85 % [......................................................................] 86 % [......................................................................] 86 % [......................................................................] 87 % [......................................................................] 87 % [......................................................................] 88 % [......................................................................] 88 % [......................................................................] 89 % [......................................................................] 90 % [......................................................................] 90 % [......................................................................] 91 % [......................................................................] 91 % [......................................................................] 92 % [......................................................................] 92 % [......................................................................] 93 % [......................................................................] 94 % [......................................................................] 94 % [......................................................................] 95 % [......................................................................] 95 % [......................................................................] 96 % [......................................................................] 96 % [......................................................................] 97 % [......................................................................] 97 % [......................................................................] 98 % [......................................................................] 99 % [......................................................................] 99 % [......................................] [Type Ctrl-\ + c to quit] __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,52 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] Detect MVT/MP board... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data Power On! Updating env to v3... Saving Environment to NAND... Erasing Nand... Attempt to erase non page aligned data raise: Signal # 8 caught raise: Signal # 8 caught __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12-gec25d27-dirty (Oct 26 2015 - 16:53:05) Marvell version: v2011.12 2014_T2.0p1 06/23/2015 ReadyNAS-102 V2.0 Board: DB-88F6710-BP SoC: MV6710 A1 CPU: Marvell PJ4B v7 UP (Rev 1) LE CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 200 [MHz] DDR @ 600 [MHz] DDR 16Bit Width, FastPath Memory Access DRAM: 512 MiB Map: Code: 0x1feef000:0x1ff9ef34 BSS: 0x1ffef0a0 Stack: 0x1f9eeef8 Heap: 0x1f9ef000:0x1feef000 NAND: (ID 0xd7ec) nand_get_flash_type: second ID read did not match ac,d7 against ec,53 No NAND device found!!! 0 MiB MMC: MRVL_MMC: 0 *** Warning - readenv() failed, using default environment Initialize and scan all PCI interfaces PEX unit.port(active IF[-first bus]): ------------------------------------------ PEX 0: Root Complex Interface, Detected Link X1, GEN 2.0 PEX 1: Root Complex Interface, Detected Link X1, GEN 2.0 FPU not initialized USB 0: Host Mode USB 1: Host Mode Shutting down unused interfaces: GBE0 SDIO AUDIO TDM Modules/Interfaces Detected: RGMII1 Phy PEX0 (Lane 0) PEX1 (Lane 1) SATA0 (Lane 2) SATA1 (Lane 3) Net: , egiga1 [PRIME] As you can see u-boot sees device id and manufacturer id but cannot recognize it.My stock u-boot is very old and i get u-boot source code from Netgear GPL.(ReadyNASOS_V6.6.0_WW_src.zip) In here https://forum.doozan.com/read.php?2,106589,108204#msg-108204 you can see my whole story about this device. Can someone suggest any solution?

2 1

[PATCH 1/2] spi: fsl_qspi: Add support for i.MX7ULP
by Ye Li 09 Nov '22

09 Nov '22

Add compatible string and driver data for i.MX7ULP. Meanwhile, the address set to SFA1AD/SFA2AD/SFB1AD/SFB2AD should align with 1KB, because the lowest 10 bits are reserved by the registers definition. For i.MX7ULP which has only 128Bytes AHB buffer, must align it when setting the registers and selecting cs. Signed-off-by: Ye Li <ye.li(a)nxp.com> Reviewed-by: Ashish Kumar <Ashish.Kumar(a)nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh(a)nxp.com> --- drivers/spi/fsl_qspi.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index e715f98..d9f531a 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -231,6 +231,15 @@ static const struct fsl_qspi_devtype_data imx6ul_data = { .little_endian = true, }; +static const struct fsl_qspi_devtype_data imx7ulp_data = { + .rxfifo = SZ_64, + .txfifo = SZ_64, + .ahb_buf_size = SZ_128, + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK | + QUADSPI_QUIRK_USE_TDH_SETTING, + .little_endian = true, +}; + static const struct fsl_qspi_devtype_data ls1021a_data = { .rxfifo = SZ_128, .txfifo = SZ_64, @@ -485,7 +494,7 @@ static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_slave *slave) static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op) { memcpy_fromio(op->data.buf.in, - q->ahb_addr + q->selected * q->devtype_data->ahb_buf_size, + q->ahb_addr + q->selected * ALIGN(q->devtype_data->ahb_buf_size, 0x400), op->data.nbytes); } @@ -589,7 +598,7 @@ static int fsl_qspi_exec_op(struct spi_slave *slave, addr_offset = q->memmap_phy; qspi_writel(q, - q->selected * q->devtype_data->ahb_buf_size + addr_offset, + q->selected * ALIGN(q->devtype_data->ahb_buf_size, 0x400) + addr_offset, base + QUADSPI_SFAR); qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) | @@ -695,13 +704,13 @@ static int fsl_qspi_default_setup(struct fsl_qspi *q) * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD, * SFB2AD accordingly. */ - qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) + addr_offset, base + QUADSPI_SFA1AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 2 + addr_offset, base + QUADSPI_SFA2AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 3 + addr_offset, base + QUADSPI_SFB1AD); - qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset, + qspi_writel(q, ALIGN(q->devtype_data->ahb_buf_size, 0x400) * 4 + addr_offset, base + QUADSPI_SFB2AD); q->selected = -1; @@ -799,6 +808,7 @@ static const struct udevice_id fsl_qspi_ids[] = { { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data, }, { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_data, }, { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx7d_data, }, + { .compatible = "fsl,imx7ulp-qspi", .data = (ulong)&imx7ulp_data, }, { .compatible = "fsl,ls1021a-qspi", .data = (ulong)&ls1021a_data, }, { .compatible = "fsl,ls1088a-qspi", .data = (ulong)&ls1088a_data, }, { .compatible = "fsl,ls2080a-qspi", .data = (ulong)&ls2080a_data, }, -- 2.7.4

3 4

[U-Boot] [PATCH 1/2] rockchip: rk3399: fix force power on reset
by Vasily Khoruzhick 19 May '22

19 May '22

Currently code doesn't even compile since it uses wrong define for ifdef. Fix that and also add missing include Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init") Signed-off-by: Vasily Khoruzhick <anarsoul(a)gmail.com> --- arch/arm/mach-rockchip/rk3399/rk3399.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 863024d071..eeb99dd11b 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -11,6 +11,7 @@ #include <asm/io.h> #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/cru_rk3399.h> #include <asm/arch-rockchip/gpio.h> #include <asm/arch-rockchip/grf_rk3399.h> #include <asm/arch-rockchip/hardware.h> @@ -213,7 +214,7 @@ void spl_perform_fixups(struct spl_image_info *spl_image) "u-boot,spl-boot-device", boot_ofpath); } -#if defined(SPL_GPIO_SUPPORT) +#if defined(CONFIG_SPL_GPIO_SUPPORT) static void rk3399_force_power_on_reset(void) { ofnode node; @@ -239,7 +240,7 @@ static void rk3399_force_power_on_reset(void) void spl_board_init(void) { -#if defined(SPL_GPIO_SUPPORT) +#if defined(CONFIG_SPL_GPIO_SUPPORT) struct rk3399_cru *cru = rockchip_get_cru(); /* -- 2.24.0

5 23

[PATCH] rockchip: rk3399: Add Nanopi M4V2 board support
by Shuying Li 25 Apr '22

25 Apr '22

From: Libunko <libunko(a)qq.com> Add initial support for Nanopi M4V2 board. Specification - Rockchip RK3399 - Dual-Channel 4GB LPDDR4 - SD card slot - eMMC socket - RTL8211E 1Gbps - AP6356S WiFI/BT - HDMI In/Out, MIPI DSI/CSI - USB 3.0 x4 - USB Type C power and data - GPIO1, GPIO2 expansion ports - DC5V/3A Signed-off-by: Shuying Li <libunko(a)qq.com> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi | 7 +++ arch/arm/dts/rk3399-nanopi-m4v2.dts | 67 +++++++++++++++++++++ board/rockchip/evb_rk3399/MAINTAINERS | 6 ++ configs/nanopi-m4v2-rk3399_defconfig | 61 +++++++++++++++++++ doc/board/rockchip/rockchip.rst | 1 + 6 files changed, 143 insertions(+) create mode 100644 arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-nanopi-m4v2.dts create mode 100644 configs/nanopi-m4v2-rk3399_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f8f529435b..7e8dfcef88 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -130,6 +130,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-nanopc-t4.dtb \ rk3399-nanopi-m4.dtb \ rk3399-nanopi-m4-2gb.dtb \ + rk3399-nanopi-m4v2.dtb \ rk3399-nanopi-neo4.dtb \ rk3399-orangepi.dtb \ rk3399-pinebook-pro.dtb \ diff --git a/arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi new file mode 100644 index 0000000000..ff8e99cb7f --- /dev/null +++ b/arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Shuying Li <libunko(a)qq.com> + */ + +#include "rk3399-nanopi4-u-boot.dtsi" +#include "rk3399-sdram-lpddr4-100.dtsi" diff --git a/arch/arm/dts/rk3399-nanopi-m4v2.dts b/arch/arm/dts/rk3399-nanopi-m4v2.dts new file mode 100644 index 0000000000..03d956d2c4 --- /dev/null +++ b/arch/arm/dts/rk3399-nanopi-m4v2.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4V2 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + * Copyright (C) 2020 Shuying Li <libunko(a)qq.com> + */ + +/dts-v1/; +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyElec NanoPi M4V2"; + compatible = "friendlyarm,nanopi-m4v2", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2: vcc5v0-usb2 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb2"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS index 4c889e06a6..9967d68a88 100644 --- a/board/rockchip/evb_rk3399/MAINTAINERS +++ b/board/rockchip/evb_rk3399/MAINTAINERS @@ -49,6 +49,12 @@ S: Maintained F: configs/nanopi-m4-2gb-rk3399_defconfig F: arch/arm/dts/rk3399-nanopi-m4-2gb-u-boot.dtsi +NANOPC-M4V2 +M: Shuying Li <libunko(a)qq.com> +S: Maintained +F: configs/nanopi-m4v2-rk3399_defconfig +F: arch/arm/dts/rk3399-nanopi-m4v2-u-boot.dtsi + NANOPI-NEO4 M: Jagan Teki <jagan(a)amarulasolutions.com> S: Maintained diff --git a/configs/nanopi-m4v2-rk3399_defconfig b/configs/nanopi-m4v2-rk3399_defconfig new file mode 100644 index 0000000000..d5c58d549f --- /dev/null +++ b/configs/nanopi-m4v2-rk3399_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_OFFSET=0x3F8000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_TARGET_EVB_RK3399=y +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4v2" +CONFIG_DEBUG_UART=y +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4v2.dtb" +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_TPL=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_DM_RESET=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index 8c92de0c92..25746f1a2e 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -61,6 +61,7 @@ List of mainline supported rockchip boards: - Firefly ROC-RK3399-PC - FriendlyElec NanoPC-T4 (nanopc-t4-rk3399) - FriendlyElec NanoPi M4 (nanopi-m4-rk3399) + - FriendlyElec NanoPi M4V2 (nanopi-m4v2-rk3399) - FriendlyARM NanoPi NEO4 (nanopi-neo4-rk3399) - Google Bob (chromebook_bob) - Khadas Edge (khadas-edge-rk3399) -- 2.25.1

5 7

[PATCH 0/2] Update reserved memory for simple framebuffer
by Michael Trimarchi 14 Apr '22

14 Apr '22

Reserved memory for simple frame buffer should be created in a different way: + aliases { + display0 = &lcdif; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display_reserved: framebuffer@86fa2000 { + reg = <0x86fa2000 0x80000>; + no-map; + }; + + }; We add a function to change the loaded dts and inject those information. I have added another patch for meson. Right now I'm testing on tinker-s board. Michael Trimarchi (2): common: fdt: Add a function for reserving memory without kernel linear mapping video: meson: Use reserving memory function without kernel linear mapping common/fdt_support.c | 40 +++++++++++++++++++++++++++++++++ drivers/video/meson/meson_vpu.c | 6 ++--- include/fdt_support.h | 11 +++++++++ 3 files changed, 54 insertions(+), 3 deletions(-) -- 2.17.1

3 6

[PATCH 00/14] mtd: nand: i.MX update
by Peng Fan 18 Mar '22

18 Mar '22

This is to upstream NXP downstream mtd nand patches, including DT/CLK/i.MX8M/i.MX8/SPL Alice Guo (2): nand: mxs_nand: make imx8mm can use hardware BCH and randomizer nand: enable the Randomizer module for i.mx7 and i.mx8 Han Xu (3): mtd: nand: mxs_nand: add i.MX6QP compatible string mtd: mxs_nand: fix the gf_13/14 definition issue mxs_nand: don't check zero count when ECC reading with randomizer Peng Fan (3): nand: mxs: fix the bitflips for erased page when uncorrectable error nand: mxs: correct bitflip for erased NAND page mtd: nand: support GPMI NAND driver for i.MX8 Ye Li (6): mtd: gpmi: change the BCH layout setting for large oob NAND mtd: gpmi: provide the option to use legacy bch geometry mxs_nand: Add support for i.MX8M nand: Update SPL MXS NAND mini driver mxs_nand: Update compatible string for i.MX6SX MXS_NAND: Add clock support for iMX8 arch/arm/include/asm/mach-imx/dma.h | 15 +- arch/arm/include/asm/mach-imx/regs-apbh.h | 9 +- arch/arm/include/asm/mach-imx/regs-bch.h | 20 +- drivers/dma/Kconfig | 2 +- drivers/dma/apbh_dma.c | 13 +- drivers/mtd/nand/raw/Kconfig | 6 +- drivers/mtd/nand/raw/mxs_nand.c | 291 ++++++++++++++++++++++-------- drivers/mtd/nand/raw/mxs_nand_dt.c | 91 ++++++++++ drivers/mtd/nand/raw/mxs_nand_spl.c | 41 ++++- include/mxs_nand.h | 15 +- 10 files changed, 387 insertions(+), 116 deletions(-) -- 2.16.4

7 36

iMX8MM USB support?
by Tim Harvey 09 Mar '22

09 Mar '22

Peng, It looks like IMX8MM USB support hasn't made it upstream yet. Is this something your working on? I'm interested in booting an IMX8MM via SDP. Best Regards, Tim

7 21