August 2019 - U-Boot

[U-Boot] [PATCH 1/1] siemens: avoid out of bound access
by Heinrich Schuchardt 02 Sep '19

02 Sep '19

char num[1]; sprintf(num, "%d", i); leads to a buffer overrun. Simplify the overly complex coding. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- board/siemens/common/board.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 676935a843..75462d1c34 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -189,14 +189,11 @@ void set_env_gpios(unsigned char state) { char *ptr_env; char str_tmp[5]; /* must contain "ledX"*/ - char num[1]; unsigned char i, idx, pos1, pos2, ccount; unsigned char gpio_n, gpio_s0, gpio_s1; for (i = 0; i < MAX_NR_LEDS; i++) { - strcpy(str_tmp, "led"); - sprintf(num, "%d", i); - strcat(str_tmp, num); + sprintf(str_tmp, "led%d", i); /* If env var is not found we stop */ ptr_env = env_get(str_tmp); -- 2.20.1

4 3

[U-Boot] [PATCH v2] i2c: mxc: add CONFIG_CLK support
by Peng Fan 02 Sep '19

02 Sep '19

When CONFIG_CLK enabled, use CLK UCLASS for clk related settings. Signed-off-by: Peng Fan <peng.fan(a)nxp.com> --- V2: use clk_get_rate when getting i2c per clk rate with CLK UCLASS arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 ++++++ drivers/i2c/mxc_i2c.c | 22 ++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h index 8e1ea9af19..81fd981444 100644 --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h @@ -6,6 +6,9 @@ #define __ASM_ARCH_MXC_MXC_I2C_H__ #include <asm-generic/gpio.h> #include <asm/mach-imx/iomux-v3.h> +#if CONFIG_IS_ENABLED(CLK) +#include <clk.h> +#endif struct i2c_pin_ctrl { iomux_v3_cfg_t i2c_mode; @@ -47,6 +50,9 @@ struct mxc_i2c_bus { ulong driver_data; int speed; struct i2c_pads_info *pads_info; +#if CONFIG_IS_ENABLED(CLK) + struct clk per_clk; +#endif #ifndef CONFIG_DM_I2C int (*idle_bus_fn)(void *p); void *idle_bus_data; diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 23119cce65..8d6b4650ff 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -149,7 +149,12 @@ static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate) #endif /* Divider value calculation */ +#if CONFIG_IS_ENABLED(CLK) + i2c_clk_rate = clk_get_rate(&i2c_bus->per_clk); +#else i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK); +#endif + div = (i2c_clk_rate + rate - 1) / rate; if (div < i2c_clk_div[0][0]) clk_div = 0; @@ -890,9 +895,22 @@ static int mxc_i2c_probe(struct udevice *bus) i2c_bus->bus = bus; /* Enable clk */ +#if CONFIG_IS_ENABLED(CLK) + ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk); + if (ret) { + printf("Failed to get i2c clk\n"); + return ret; + } + ret = clk_enable(&i2c_bus->per_clk); + if (ret) { + printf("Failed to enable i2c clk\n"); + return ret; + } +#else ret = enable_i2c_clk(1, bus->seq); if (ret < 0) return ret; +#endif /* * See Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -919,7 +937,11 @@ static int mxc_i2c_probe(struct udevice *bus) ret = i2c_idle_bus(i2c_bus); if (ret < 0) { /* Disable clk */ +#if CONFIG_IS_ENABLED(CLK) + clk_disable(&i2c_bus->per_clk); +#else enable_i2c_clk(0, bus->seq); +#endif return ret; } -- 2.16.4

3 5

[U-Boot] [PATCH v2 00/16] rk3399: Add redundant boot support
by Jagan Teki 02 Sep '19

02 Sep '19

Boot redundancy is one of the key criteria for switch recovery or golden partition based on the bootcount value, which indeed very much needed in production systems on the fields. This patchset support redundant boot on Rockchip rk3399. To make full functional redundancy below features would require from U-Boot level. - bootcount, for counting number reboots - altboot - watchdog support, if SPL or U-Boot reset because of WDT - add CPUINFO for more understanding about how SoC and reset reason. Changes for v2: - Handle TPL build for watchdog, if TPL won't enable - Fix comments for dw_wdt driver-model comments from Andy - Add Kconfig items for WDT_TPL - Support WDT on TPL as well - Use SYS_SOC for cpu-info I would like, not to merge watchdog and bootcount on Mainline devboards since these features will mostly required on production devices but any comments, please share. Any inputs? Jagan. Jagan Teki (16): rockchip: Add cpu-info rockchip: rk3288/rk3399: Enable DISPLAY_CPUINFO arm: rockchip: Add common cru.h rockchip: Add rk3399 reset cause wdt: designware: Simplify is_enabled function wdt: designware: Simplify enable function wdt: dw: Add driver-model support wdt: dw: Rename to dw_wdt.c rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for watchdog wdt: Kconfig: Add WDT_DW entry wdt: Kconfig: Add TPL_WDT entry spl: Add watchdog support fot TPL watchdog: Handle TPL build with watchdog disabled [DO NOT MERGE] rk3399: rockpro64: Enable watchdog rockchip: rk3399: Add bootcount support [DO NOT MERGE] rk3399: rockpro64: Enable bootcount arch/arm/dts/rk3399-u-boot.dtsi | 6 + arch/arm/include/asm/arch-rockchip/cru.h | 26 +++ .../include/asm/arch-rockchip/cru_rk3399.h | 10 +- arch/arm/mach-rockchip/Kconfig | 2 + arch/arm/mach-rockchip/Makefile | 1 + arch/arm/mach-rockchip/cpu-info.c | 59 ++++++ arch/arm/mach-rockchip/rk3399/Kconfig | 10 + arch/arm/mach-rockchip/rk3399/clk_rk3399.c | 2 +- arch/arm/mach-rockchip/rk3399/rk3399.c | 2 +- common/board_f.c | 2 +- common/spl/Kconfig | 9 + configs/evb-rk3288_defconfig | 1 - configs/evb-rk3399_defconfig | 1 - configs/ficus-rk3399_defconfig | 1 - configs/firefly-rk3288_defconfig | 1 - configs/firefly-rk3399_defconfig | 1 - configs/khadas-edge-captain-rk3399_defconfig | 1 - configs/khadas-edge-rk3399_defconfig | 1 - configs/khadas-edge-v-rk3399_defconfig | 1 - configs/miqi-rk3288_defconfig | 1 - configs/nanopc-t4-rk3399_defconfig | 1 - configs/nanopi-m4-rk3399_defconfig | 1 - configs/nanopi-neo4-rk3399_defconfig | 1 - configs/orangepi-rk3399_defconfig | 1 - configs/phycore-rk3288_defconfig | 1 - configs/popmetal-rk3288_defconfig | 1 - configs/puma-rk3399_defconfig | 1 - configs/rock-pi-4-rk3399_defconfig | 1 - configs/rock960-rk3399_defconfig | 1 - configs/rockpro64-rk3399_defconfig | 4 +- configs/tinker-rk3288_defconfig | 1 - configs/vyasa-rk3288_defconfig | 1 - drivers/Makefile | 2 +- drivers/clk/rockchip/clk_rk3399.c | 36 ++-- drivers/ram/rockchip/sdram_rk3399.c | 10 +- drivers/video/rockchip/rk3399_mipi.c | 2 +- drivers/video/rockchip/rk_mipi.c | 2 +- drivers/watchdog/Kconfig | 15 ++ drivers/watchdog/Makefile | 2 +- drivers/watchdog/designware_wdt.c | 73 ------- drivers/watchdog/dw_wdt.c | 188 ++++++++++++++++++ include/configs/rk3399_common.h | 5 +- include/configs/socfpga_common.h | 2 +- include/configs/socfpga_stratix10_socdk.h | 2 +- include/watchdog.h | 7 +- scripts/config_whitelist.txt | 1 - 46 files changed, 364 insertions(+), 136 deletions(-) create mode 100644 arch/arm/include/asm/arch-rockchip/cru.h create mode 100644 arch/arm/mach-rockchip/cpu-info.c delete mode 100644 drivers/watchdog/designware_wdt.c create mode 100644 drivers/watchdog/dw_wdt.c -- 2.18.0.321.gffc6fa0e3

2 17

[U-Boot] [PATCH] rpi3: Enable verified boot from FIT image
by Jun Nie 02 Sep '19

02 Sep '19

Enable verified boot from FIT image with select configs and specify boot script image node in FIT image, the FIT image is verified before it is run. Code that reusing dtb in firmware is disabled, so that the dtb with pubic key packed in u-boot.bin can be used to verify the signature of next stage FIT image. Signed-off-by: Jun Nie <jun.nie(a)linaro.org> --- board/raspberrypi/rpi/rpi.c | 6 ++++++ include/configs/rpi.h | 15 ++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 617c892..950ee84 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -297,6 +297,7 @@ static void set_fdtfile(void) env_set("fdtfile", fdtfile); } +#ifndef CONFIG_FIT_SIGNATURE /* * If the firmware provided a valid FDT at boot time, let's expose it in * ${fdt_addr} so it may be passed unmodified to the kernel. @@ -311,6 +312,7 @@ static void set_fdt_addr(void) env_set_hex("fdt_addr", fw_dtb_pointer); } +#endif /* * Prevent relocation from stomping on a firmware provided FDT blob. @@ -393,7 +395,9 @@ static void set_serial_number(void) int misc_init_r(void) { +#ifndef CONFIG_FIT_SIGNATURE set_fdt_addr(); +#endif set_fdtfile(); set_usbethaddr(); #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -470,6 +474,7 @@ int board_init(void) return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); } +#ifndef CONFIG_FIT_SIGNATURE /* * If the firmware passed a device tree use it for U-Boot. */ @@ -479,6 +484,7 @@ void *board_fdt_blob_setup(void) return NULL; return (void *)fw_dtb_pointer; } +#endif int ft_board_setup(void *blob, bd_t *bd) { diff --git a/include/configs/rpi.h b/include/configs/rpi.h index f76c7d1..ba91205 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -180,11 +180,24 @@ #include <config_distro_bootcmd.h> +#ifdef CONFIG_FIT_SIGNATURE +#define FIT_BOOT_CMD \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "iminfo ${scriptaddr};" \ + "if test $? -eq 1; then reset; fi;" \ + "source ${scriptaddr}:bootscr\0" +#else +#define FIT_BOOT_CMD "" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ "dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \ ENV_DEVICE_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV + BOOTENV \ + FIT_BOOT_CMD #endif -- 2.7.4

1 2

[U-Boot] [PATCH] dm: mmc_spi: Fix NULL pointer dereference in mmc_spi_bind()
by Bin Meng 02 Sep '19

02 Sep '19

The mmc_spi driver's priv is not available in its bind phase(). Use platdata instead. Fixes: 05e35d429745 ("mmc: mmc_spi: Re-write driver using DM framework") Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- drivers/mmc/mmc_spi.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index 350812a..c693fb2 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -58,12 +58,15 @@ #define READ_TIMEOUT 3000000 /* 1 sec */ #define WRITE_TIMEOUT 3000000 /* 1 sec */ -struct mmc_spi_priv { - struct spi_slave *spi; +struct mmc_spi_plat { struct mmc_config cfg; struct mmc mmc; }; +struct mmc_spi_priv { + struct spi_slave *spi; +}; + static int mmc_spi_sendcmd(struct udevice *dev, ushort cmdidx, u32 cmdarg, u32 resp_type, u8 *resp, u32 resp_size, @@ -370,6 +373,7 @@ done: static int mmc_spi_probe(struct udevice *dev) { struct mmc_spi_priv *priv = dev_get_priv(dev); + struct mmc_spi_plat *plat = dev_get_platdata(dev); struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); char *name; @@ -385,28 +389,28 @@ static int mmc_spi_probe(struct udevice *dev) return -ENOMEM; sprintf(name, "%s:%s", dev->parent->name, dev->name); - priv->cfg.name = name; - priv->cfg.host_caps = MMC_MODE_SPI; - priv->cfg.voltages = MMC_SPI_VOLTAGE; - priv->cfg.f_min = MMC_SPI_MIN_CLOCK; - priv->cfg.f_max = priv->spi->max_hz; - priv->cfg.part_type = PART_TYPE_DOS; - priv->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; + plat->cfg.name = name; + plat->cfg.host_caps = MMC_MODE_SPI; + plat->cfg.voltages = MMC_SPI_VOLTAGE; + plat->cfg.f_min = MMC_SPI_MIN_CLOCK; + plat->cfg.f_max = priv->spi->max_hz; + plat->cfg.part_type = PART_TYPE_DOS; + plat->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; - priv->mmc.cfg = &priv->cfg; - priv->mmc.priv = priv; - priv->mmc.dev = dev; + plat->mmc.cfg = &plat->cfg; + plat->mmc.priv = priv; + plat->mmc.dev = dev; - upriv->mmc = &priv->mmc; + upriv->mmc = &plat->mmc; return 0; } static int mmc_spi_bind(struct udevice *dev) { - struct mmc_spi_priv *priv = dev_get_priv(dev); + struct mmc_spi_plat *plat = dev_get_platdata(dev); - return mmc_bind(dev, &priv->mmc, &priv->cfg); + return mmc_bind(dev, &plat->mmc, &plat->cfg); } static const struct dm_mmc_ops mmc_spi_ops = { @@ -426,5 +430,6 @@ U_BOOT_DRIVER(mmc_spi) = { .ops = &mmc_spi_ops, .probe = mmc_spi_probe, .bind = mmc_spi_bind, + .platdata_auto_alloc_size = sizeof(struct mmc_spi_plat), .priv_auto_alloc_size = sizeof(struct mmc_spi_priv), }; -- 2.7.4

2 1

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 01 Sep '19

01 Sep '19

The following changes since commit 8c56ea5c1e033f16993e5427300399ef848234bb: Merge branch 'u-boot-stm32_20190827' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm (2019-08-27 13:19:47 -0400) are available in the Git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to fd0637b814cdbc8aa9060f313f6c8e71fb9c5d15: dwc2: use the nonblock argument in submit_int_msg (2019-08-29 14:07:26 +0200) ---------------------------------------------------------------- Michal Suchanek (5): usb_kdb: only process events successfully received usb: usb_submit_int_msg -> usb_int_msg usb: storage: submit_int_msg -> usb_int_msg usb: Add nonblock argument to submit_int_msg dwc2: use the nonblock argument in submit_int_msg common/usb.c | 11 +++++++---- common/usb_kbd.c | 11 +++++------ common/usb_storage.c | 4 ++-- drivers/usb/emul/sandbox_keyb.c | 3 ++- drivers/usb/emul/usb-emul-uclass.c | 6 ++++-- drivers/usb/host/dwc2.c | 15 +++++++++------ drivers/usb/host/ehci-hcd.c | 13 ++++++++----- drivers/usb/host/ohci-hcd.c | 4 ++-- drivers/usb/host/r8a66597-hcd.c | 2 +- drivers/usb/host/sl811-hcd.c | 2 +- drivers/usb/host/usb-sandbox.c | 5 +++-- drivers/usb/host/usb-uclass.c | 5 +++-- drivers/usb/host/xhci.c | 13 ++++++++----- drivers/usb/musb-new/musb_uboot.c | 12 +++++++----- include/usb.h | 11 ++++++----- 15 files changed, 68 insertions(+), 49 deletions(-)

2 2

[U-Boot] [PATCH] ARM: omapl138_lcdk: Remove dead code
by Adam Ford 31 Aug '19

31 Aug '19

The header it littered with #ifdefs and #defines and that appear to be legacy associations to the older da850-evm and in some cases obsolete with either Kconfig or DM migrations. This patch removes these legacy references. Signed-off-by: Adam Ford <aford173(a)gmail.com> diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index cab402a484..1c41e7e97a 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -13,8 +13,6 @@ /* * Board */ -#undef CONFIG_USE_SPIFLASH -#undef CONFIG_SYS_USE_NOR /* * SoC Configuration @@ -104,21 +102,10 @@ * Serial Driver info */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#if !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#endif #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 -#endif - /* * I2C Configuration */ @@ -168,24 +155,6 @@ #define CONFIG_SPL_NAND_LOAD #endif -#ifdef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3) -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ -#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\ - + 3) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_ENV_SIZE (64 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) -#define CONFIG_ENV_SECT_SIZE (64 << 10) -#endif - /* * Network & Ethernet Configuration */ @@ -244,12 +213,6 @@ #define CONFIG_CLOCKS #endif -#if !defined(CONFIG_NAND) && \ - !defined(CONFIG_SYS_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_SIZE (16 << 10) -#endif - /* SD/MMC */ #ifdef CONFIG_ENV_IS_IN_MMC @@ -259,7 +222,6 @@ #define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ #endif -#ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) @@ -267,7 +229,6 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_MAX_FOOTPRINT 32768 #define CONFIG_SPL_PAD_TO 32768 -#endif /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 -- 2.17.1

1 0

[U-Boot] [PATCH] Fix unreliable detection of DRAM size on Orange Pi 3
by megous＠megous.com 30 Aug '19

30 Aug '19

From: Ondrej Jirman <megous(a)megous.com> Orange Pi 3 has 2 GiB of DRAM, that sometime get misdetected as 4 GiB, due to false negative result from mctl_mem_matches() when detecting number of column address bits. This leads to u-boot detecting more address bits than there are and the boot process hangs shortly after. In mctl_mem_matches() we need to wait for each write to finish, separately. Without this, the check is not reliable for some unknown reason, probably having to do with unpredictable memory access ordering. Patch was made with help from André Przywara, who noticed that my original idea about detection failing due to read-back from cache without involving DRAM was false, because data cache is still of at the time of the DRAM size autodetection. Signed-off-by: Ondrej Jirman <megous(a)megous.com> Cc: André Przywara <andre.przywara(a)arm.com> --- arch/arm/mach-sunxi/dram_helpers.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-sunxi/dram_helpers.c b/arch/arm/mach-sunxi/dram_helpers.c index 239ab421a8..6dba448638 100644 --- a/arch/arm/mach-sunxi/dram_helpers.c +++ b/arch/arm/mach-sunxi/dram_helpers.c @@ -30,6 +30,7 @@ bool mctl_mem_matches(u32 offset) { /* Try to write different values to RAM at two addresses */ writel(0, CONFIG_SYS_SDRAM_BASE); + dsb(); writel(0xaa55aa55, (ulong)CONFIG_SYS_SDRAM_BASE + offset); dsb(); /* Check if the same value is actually observed when reading back */ -- 2.22.0

5 8

[U-Boot] [PATCH] scrapyard: Delete this file and script
by Tom Rini 30 Aug '19

30 Aug '19

The README.scrapyard file has been inconsistently updated. While well intentioned, bad data is worse than no data, and in this case a pointer to use the history that git provides. Remove the current content and the script that would update it from time to time as well. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- doc/README.scrapyard | 354 +--------------------------------------------- scripts/fill_scrapyard.py | 165 --------------------- 2 files changed, 2 insertions(+), 517 deletions(-) delete mode 100755 scripts/fill_scrapyard.py diff --git a/doc/README.scrapyard b/doc/README.scrapyard index fc0873431aa4..7c239c1dadb8 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -4,355 +4,5 @@ negligence in combination with ordinary bitrot. Sometimes this goes by unnoticed, but often build errors will result. If nobody cares any more to resolve such problems, then the code is really dead and will be removed from the U-Boot source tree. The remainders rest in peace -in the imperishable depths of the git history. This document tries to -maintain a list of such former fellows, so archaeologists can check -easily if there is something they might want to dig for... -The list should be sorted in reverse chronological order. - - -Board Arch CPU Commit Removed Last known maintainer/contact -================================================================================================= -ocotea powerpc ppc4xx 29155e73 2015-10-27 Stefan Roese <sr(a)denx.de> -taishan powerpc ppc4xx bb5553c6 2015-10-27 Stefan Roese <sr(a)denx.de> -ebony powerpc ppc4xx 9d9e2f5d 2015-10-27 Stefan Roese <sr(a)denx.de> -taihu powerpc ppc4xx 123b6cd7 2015-10-27 John Otken <jotken(a)softadvances.com> -lcd4_lwmon5 powerpc ppc4xx b6b5e394 2015-10-02 Stefan Roese <sr(a)denx.de> -da830evm arm arm926ejs d7e8b2b9 2015-09-12 Nick Thompson <nick.thompson(a)gefanuc.com> -wireless_space arm arm926ejs b352182a 2015-09-12 Albert ARIBAUD <albert.u.boot(a)aribaud.net> -stxgp3 powerpc mpc85xx 2ec69b88 2015-09-02 Dan Malek <dan(a)embeddedalley.com> -stxssa powerpc mpc85xx 2ec69b88 2015-09-02 Dan Malek <dan(a)embeddedalley.com> -cmi_mpc5xx powerpc mpc5xx 972f5320 2015-09-02 -zeus powerpc ppc4xx eb5d1dc7 2015-09-02 Stefan Roese <sr(a)denx.de> -sbc405 powerpc ppc4xx 0e030593 2015-09-02 -pcs440ep powerpc ppc4xx 242836a8 2015-09-02 Stefan Roese <sr(a)denx.de> -p3p440 powerpc ppc4xx c6999e5f 2015-09-02 Stefan Roese <sr(a)denx.de> -csb272/csb472 powerpc ppc4xx 54a3f260 2015-09-02 Tolunay Orkun <torkun(a)nextio.com> -alpr powerpc ppc4xx 0d2fc811 2015-09-02 Stefan Roese <sr(a)denx.de> -balloon3 arm pxa 679d4456 2015-08-30 Marek Vasut <marex(a)denx.de> -cpu9260_128M arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpu9260 arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpu9260_nand_128M arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpu9260_nand arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpu9G20_128M arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpu9G20 arm arm926ejs af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpuat91 arm arm920t af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -cpuat91_ram arm arm920t af7f884b 2015-08-30 Eric Benard <eric(a)eukrea.com> -davinci_dm355evm arm arm926ejs 6761946f 2015-08-30 -davinci_dm355leopard arm arm926ejs 6761946f 2015-08-30 -davinci_dm365evm arm arm926ejs 6761946f 2015-08-30 -davinci_dm6467evm arm arm926ejs 6761946f 2015-08-30 -davinci_dm6467Tevm arm arm926ejs 6761946f 2015-08-30 -davinci_dvevm arm arm926ejs 6761946f 2015-08-30 -davinci_schmoogie arm arm926ejs 6761946f 2015-08-30 -davinci_sffsdr arm arm926ejs 6761946f 2015-08-30 -davinci_sonata arm arm926ejs 6761946f 2015-08-30 -dig297 arm armv7 5ff33d04 2015-08-30 Luca Ceresoli <luca.ceresoli(a)comelit.it> -ea20 arm arm926ejs 6761946f 2015-08-30 -eb_cpux9k2 arm arm920t 5522f12b 2015-08-30 Jens Scharsig <esw(a)bus-elektronik.de> -eb_cpux9k2_ram arm arm920t 5522f12b 2015-08-30 Jens Scharsig <esw(a)bus-elektronik.de> -enbw_cmc arm arm926ejs a6f7f787 2015-08-30 Heiko Schocher <hs(a)denx.de> -ima3-mx53 arm armv7 3eb8f58d 2015-08-30 -imx27lite arm arm926ejs bc0840bc 2015-08-30 Wolfgang Denk <wd(a)denx.de> -imx31_litekit arm arm1136 36d14178 2015-08-30 -jornada arm sa1100 df0b116d 2015-08-30 Kristoffer Ericson <kristoffer.ericson(a)gmail.com> -lp8x4x arm pxa 9f840b8d 2015-08-30 Sergey Yanovich <ynvich(a)gmail.com> -magnesium arm arm926ejs bc0840bc 2015-08-30 Heiko Schocher <hs(a)denx.de> -mv88f6281gtw_ge arm arm926ejs 7cd768cf 2015-08-30 Prafulla Wadaskar <prafulla(a)marvell.com> -mx51_efikamx arm armv7 b6073fd2 2015-08-30 -mx51_efikasb arm armv7 b6073fd2 2015-08-30 -nhk8815 arm arm926ejs 0abdd9d0 2015-08-30 Nomadik Linux Team <STN_WMM_nomadik_linux(a)list.st.com> -nhk8815_onenand arm arm926ejs 0abdd9d0 2015-08-30 Nomadik Linux Team <STN_WMM_nomadik_linux(a)list.st.com> -omap3_mvblx arm armv7 8dc372f9 2015-08-30 Michael Jones <michael.jones(a)matrix-vision.de> -omap3_sdp3430 arm armv7 93b25c08 2015-08-30 Nishanth Menon <nm(a)ti.com> -otc570 arm arm926ejs 819216dd 2015-08-30 Daniel Gorsulowski <daniel.gorsulowski(a)esd.eu> -otc570_dataflash arm arm926ejs 819216dd 2015-08-30 Daniel Gorsulowski <daniel.gorsulowski(a)esd.eu> -palmld arm pxa 35782e9c 2015-08-30 Marek Vasut <marex(a)denx.de> -palmtc arm pxa 8896325d 2015-08-30 Marek Vasut <marex(a)denx.de> -palmtreo680 arm pxa ad4f54ea 2015-08-30 Mike Dunn <mikedunn(a)newsguy.com> -polaris arm pxa f6eac00a 2015-08-30 Stefano Babic <sbabic(a)denx.de> -portuxg20 arm arm926ejs 79d19734 2015-08-30 Markus Hubig <mhubig(a)imko.de> -pxa255_idp arm pxa 49d8899b 2015-08-30 Marek Vasut <marex(a)denx.de> -qong arm arm1136 daf77086 2015-08-30 Wolfgang Denk <wd(a)denx.de> -rd6281a arm arm926ejs 47b87d2e 2015-08-30 Prafulla Wadaskar <prafulla(a)marvell.com> -scb9328 arm arm920t 7650beb7 2015-08-30 Torsten Koschorrek <koschorrek(a)synertronixx.de> -snowball arm armv7 7495e41b 2015-08-30 Mathieu Poirier <mathieu.poirier(a)linaro.org> -stamp9g20 arm arm926ejs 79d19734 2015-08-30 Markus Hubig <mhubig(a)imko.de> -tk71 arm arm926ejs f73db66d 2015-08-30 -trizepsiv arm pxa f6eac00a 2015-08-30 Stefano Babic <sbabic(a)denx.de> -tt01 arm arm1136 0c81f37d 2015-08-30 Helmut Raiger <helmut.raiger(a)hale.at> -tx25 arm arm926ejs b9599dd8 2015-08-30 John Rigby <jcrigby(a)gmail.com> -u8500_href arm armv7 7495e41b 2015-08-30 -versatileab arm arm926ejs b928e658 2015-08-30 -versatilepb arm arm926ejs b928e658 2015-08-30 -versatileqemu arm arm926ejs b928e658 2015-08-30 -vision2 arm armv7 bee2b99d 2015-08-30 Stefano Babic <sbabic(a)denx.de> -vl_ma2sc arm arm926ejs 6e830dfc 2015-08-30 Jens Scharsig <esw(a)bus-elektronik.de> -vl_ma2sc_ram arm arm926ejs 6e830dfc 2015-08-30 Jens Scharsig <esw(a)bus-elektronik.de> -vpac270_nor_128 arm pxa 452ef830 2015-08-30 Marek Vasut <marex(a)denx.de> -vpac270_nor_256 arm pxa 452ef830 2015-08-30 Marek Vasut <marex(a)denx.de> -vpac270_ond_256 arm pxa 452ef830 2015-08-30 Marek Vasut <marex(a)denx.de> -xaeniax arm pxa 1c87dd76 2015-08-30 -zipitz2 arm pxa 49d8899b 2015-08-30 Cliff Brake <cliff.brake(a)gmail.com> -cam_enc_4xx arm arm926ejs 8d775763 2015-08-20 Heiko Schocher <hs(a)denx.de> -afeb9260 arm arm926ejs f6b42c14 2015-05-13 Sergey Lapin <slapin(a)ossfans.org> -tny_a9260 arm arm926ejs f6b42c14 2015-05-13 Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -sbc35_a9g20 arm arm926ejs f6b42c14 2015-05-13 Albin Tonnerre <albin.tonnerre(a)free-electrons.com> -sc3 powerpc ppc4xx 27e72156 2015-05-10 Heiko Schocher <hs(a)denx.de> -T4240EMU powerpc mpc85xx 7fc63cca 2015-05-05 York Sun <yorksun(a)freescale.com> -korat powerpc ppc4xx 5043045d 2015-03-17 Larry Johnson <lrj(a)acm.org> -W7OLMC powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen(a)mindspring.com> -W7OLMG powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen <etheisen(a)mindspring.com> -JSE powerpc ppc4xx 2da8137b 2015-03-17 Stephen Williams <steve(a)icarus.com> -hawkboard arm arm926ejs cb957cda 2015-02-24 Syed Mohammed Khasim <sm.khasim(a)gmail.com>:Sughosh Ganu <urwithsughosh(a)gmail.com> -tnetv107x arm arm1176 50b82c4b 2015-02-24 Chan-Taek Park <c-park(a)ti.com> -a320evb arm arm920t 29fc6f24 2015-02-24 Po-Yu Chuang <ratbert(a)faraday-tech.com> -cm4008 arm arm920t a2f39e83 2015-02-24 Greg Ungerer <greg.ungerer(a)opengear.com> -cm41xx arm arm920t a2f39e83 2015-02-24 -dkb arm arm926ejs 346cfba4 2015-02-24 Lei Wen <leiwen(a)marvell.com> -jadecpu arm arm926ejs 41fbbbbc 2015-02-24 Matthias Weisser <weisserm(a)arcor.de> -CATcenter powerpc ppc4xx 5344cc1a 2015-01-23 -PPChameleonEVB powerpc ppc4xx 5344cc1a 2015-01-23 Andrea "llandre" Marson <andrea.marson(a)dave-tech.it> -P2020DS powerpc mpc85xx 168dcc6c 2015-01-23 -P2020COME powerpc mpc85xx 89123536 2015-01-23 Ira W. Snyder <iws(a)ovro.caltech.edu> -P2020RDB powerpc mpc85xx 743d4815 2015-01-23 Poonam Aggrwal <poonam.aggrwal(a)freescale.com> -P2010RDB powerpc mpc85xx 743d4815 2015-01-23 -P1020RDB powerpc mpc85xx 743d4815 2015-01-23 -P1011RDB powerpc mpc85xx 743d4815 2015-01-23 -MPC8360EMDS powerpc mpc83xx 8d1e3cb1 2015-01-23 Dave Liu <daveliu(a)freescale.com> -MPC8360ERDK powerpc mpc83xx 8d1e3cb1 2015-01-23 Anton Vorontsov <avorontsov(a)ru.mvista.com> -P3G4 powerpc 74xx_7xx d928664f 2015-01-16 Wolfgang Denk <wd(a)denx.de> -ZUMA powerpc 74xx_7xx d928664f 2015-01-16 Nye Liu <nyet(a)zumanetworks.com> -ppmc7xx powerpc 74xx_7xx d928664f 2015-01-16 -ELPPC powerpc 74xx_7xx d928664f 2015-01-16 -mpc7448hpc2 powerpc 74xx_7xx d928664f 2015-01-16 Roy Zang <tie-fei.zang(a)freescale.com> -CPCI405 ppc4xx 405gp 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -CPCI405DT ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -CPCI405AB ppc4xx 405gpr 5f1459dc 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -G2000 ppc4xx 405ep 5f8f6294 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -WUH405 ppc4xx 405ep fc88a5bf 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -VOH405 ppc4xx 405ep 807db88b 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -PMC405 ppc4xx 405gp d5263304 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -PCI405 ppc4xx 405gp dbe7bb0d 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -OCRTC ppc4xx 405gpr cc6e715f 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -HUB405 ppc4xx 405ep e434d5d7 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -HH405 ppc4xx 405ep 843125da 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -DU440 ppc4xx 440epx 7ac9d47a 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -DU405 ppc4xx 405gpr bc114076 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -DP405 ppc4xx 405ep 9a4018e0 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -CPCIISER4 ppc4xx 405gp 37057260 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -CMS700 ppc4xx 405ep 2404124c 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -ASH405 ppc4xx 405ep b5e7c84f 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -AR405 ppc4xx 405gpr 61b57c4a 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -APC405 ppc4xx 405gpr 2b8a04e5 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -TASREG m68k mcf52x2 cbdc662a 2015-01-13 Matthias Fuchs <matthias.fuchs(a)esd.eu> -A3000 powerpc mpc824x d622ac39 2015-01-05 -CPC45 powerpc mpc824x d622ac39 2015-01-05 Josef Wagner <Wagner(a)Microsys.de> -CU824 powerpc mpc824x d622ac39 2015-01-05 Wolfgang Denk <wd(a)denx.de> -eXalion powerpc mpc824x d622ac39 2015-01-05 Torsten Demke <torsten.demke(a)fci.com> -MVBLUE powerpc mpc824x d622ac39 2015-01-05 -MUSENKI powerpc mpc824x d622ac39 2015-01-05 Jim Thompson <jim(a)musenki.com> -Sandpoint8240 powerpc mpc824x d622ac39 2015-01-05 Wolfgang Denk <wd(a)denx.de> -Sandpoint8245 powerpc mpc824x d622ac39 2015-01-05 Jim Thompson <jim(a)musenki.com> -utx8245 powerpc mpc824x d622ac39 2015-01-05 Greg Allen <gallen(a)arlut.utexas.edu> -atc powerpc mpc8260 9067b300 2015-01-05 Wolfgang Denk <wd(a)denx.de> -CPU86 powerpc mpc8260 f7e1af86 2015-01-05 Wolfgang Denk <wd(a)denx.de> -CPU87 powerpc mpc8260 f7e1af86 2015-01-05 -ep82xxm powerpc mpc8260 e2b19629 2015-01-05 -gw8260 powerpc mpc8260 8eecbaf3 2015-01-05 Oliver Brown <obrown(a)adventnetworks.com> -IPHASE4539 powerpc mpc8260 87882f57 2015-01-05 Wolfgang Grandegger <wg(a)denx.de> -muas3001 powerpc mpc8260 d2fd1d66 2015-01-05 Heiko Schocher <hs(a)denx.de> -PM825 powerpc mpc8260 dc0b2fb4 2015-01-05 Wolfgang Denk <wd(a)denx.de> -PM826 powerpc mpc8260 dc0b2fb4 2015-01-05 Wolfgang Denk <wd(a)denx.de> -PM828 powerpc mpc8260 dc0b2fb4 2015-01-05 -MPC8266ADS powerpc mpc8260 b3a2bbe1 2015-01-05 Rune Torgersen <runet(a)innovsys.com> -VoVPN-GW powerpc mpc8260 cc90905f 2015-01-05 -ep8260 powerpc mpc8260 4ad015ba 2015-01-05 Frank Panno <fpanno(a)delphintech.com> -ppmc8260 powerpc mpc8260 793116d2 2015-01-05 Brad Kemp <Brad.Kemp(a)seranoa.com> -sacsng powerpc mpc8260 b35c0ad6 2015-01-05 Jerry Van Baren <gerald.vanbaren(a)smiths-aerospace.com> -cogent_mpc8260 powerpc mpc8260 d19f6a60 2015-01-05 Murray Jensen <Murray.Jensen(a)csiro.au> -cogent_8xx powerpc mpc8xx d19f6a60 2015-01-05 Murray Jensen <Murray.Jensen(a)csiro.au> -ESTEEM192E powerpc mpc8xx af0e3514 2015-01-05 Conn Clark <clark(a)esteem.com> -IP860 powerpc mpc8xx 5ec71100 2015-01-05 Wolfgang Denk <wd(a)denx.de> -IVML24 powerpc mpc8xx ca620cd1 2015-01-05 Wolfgang Denk <wd(a)denx.de> -IVMS8 powerpc mpc8xx ca620cd1 2015-01-05 Wolfgang Denk <wd(a)denx.de> -lwmon powerpc mpc8xx acc2372d 2015-01-05 Wolfgang Denk <wd(a)denx.de> -NETVIA powerpc mpc8xx f017cd7f 2015-01-05 Pantelis Antoniou <panto(a)intracom.gr> -R360MPI powerpc mpc8xx 79cbecb8 2015-01-05 Wolfgang Denk <wd(a)denx.de> -RRvision powerpc mpc8xx 8737fc75 2015-01-05 Wolfgang Denk <wd(a)denx.de> -SPD823TS powerpc mpc8xx 72ba368f 2015-01-05 Wolfgang Denk <wd(a)denx.de> -KUP4K powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck <heydeck(a)kieback-peter.de> -KUP4X powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck <heydeck(a)kieback-peter.de> -ELPT860 powerpc mpc8xx 3c5b20f1 2015-01-05 The LEOX team <team(a)leox.org> -uc100 powerpc mpc8xx ceaf499b 2015-01-05 Stefan Roese <sr(a)denx.de> -FPS850L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd(a)denx.de> -FPS860L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd(a)denx.de> -NSCU powerpc mpc8xx 5d2a5ef7 2015-01-05 -SM850 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd(a)denx.de> -TK885D powerpc mpc8xx 5d2a5ef7 2015-01-05 -virtlab2 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk <wd(a)denx.de> -hermes powerpc mpc8xx 36da51e 2014-12-08 Wolfgang Denk <wd(a)denx.de> -TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer(a)emk-elektronik.de> -TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer(a)emk-elektronik.de> -TQM8272 powerpc mpc8260 f06f9a1 2014-10-27 Wolfgang Denk <wd(a)denx.de> -TQM8260 powerpc mpc8260 ccc1950 2014-10-27 Wolfgang Denk <wd(a)denx.de> -IDS8247 powerpc mpc8260 6afb357 2014-10-27 Heiko Schocher <hs(a)denx.de> -HWW1U1A powerpc mpc85xx 4109cb0 2014-10-27 Kyle Moffett <Kyle.D.Moffett(a)boeing.com> -hymod powerpc mpc8260 5038d7f 2014-10-27 Murray Jensen <Murray.Jensen(a)csiro.au> -MHPC powerpc mpc8xx 1655f9f 2014-10-27 Frank Gottschling <fgottschling(a)eltec.de> -ICU862 powerpc mpc8xx 4af5f0f 2014-10-27 Wolfgang Denk <wd(a)denx.de> -CPCI750 powerpc 74xx_7xx 03b0040 2014-10-27 Reinhard Arlt <reinhard.arlt(a)esd-electronics.com> -DB64360 powerpc 74xx_7xx 03b0040 2014-10-27 -DB64460 powerpc 74xx_7xx 03b0040 2014-10-27 -p3m750 powerpc 74xx_7xx 03b0040 2014-10-27 Stefan Roese <sr(a)denx.de> -p3m7448 powerpc 74xx_7xx 03b0040 2014-10-27 Stefan Roese <sr(a)denx.de> -MERGERBOX powerpc mpc83xx e7a5656 2014-10-10 Andre Schwarz <andre.schwarz(a)matrix-vision.de> -MVBLM7 powerpc mpc83xx e7a5656 2014-10-10 Andre Schwarz <andre.schwarz(a)matrix-vision.de> -bluestone powerpc ppc4xx 9ed3246 2014-10-10 Tirumala Marri <tmarri(a)apm.com> -CRAYL1 powerpc ppc4xx 1521cdc 2014-10-10 David Updegraff <dave(a)cray.com> -KAREF powerpc ppc4xx dc9617e 2014-10-10 Travis Sawyer <travis.sawyer(a)sandburst.com> -METROBOX powerpc ppc4xx dc9617e 2014-10-10 Travis Sawyer <travis.sawyer(a)sandburst.com> -PK1C20 nios2 - 70fbc461 2014-08-24 Scott McNutt <smcnutt(a)psyent.com> -PCI5441 nios2 - 70fbc461 2014-08-24 Scott McNutt <smcnutt(a)psyent.com> -flagadm powerpc mpc8xx aec6f8c5 2014-08-22 Kári Davíðsson <kd(a)flaga.is> -gen860t powerpc mpc8xx 6bde1ec1 2014-08-22 Keith Outwater <Keith_Outwater(a)mvis.com> -sixnet powerpc mpc8xx 4723ce49 2014-08-22 Dave Ellis <DGE(a)sixnetio.com> -svm_sc8xx powerpc mpc8xx d1a4aafd 2014-08-22 John Zhan <zhanz(a)sinovee.com> -stxxtc powerpc mpc8xx 0ace4d9d 2014-08-22 Dan Malek <dan(a)embeddedalley.com> -omap5912osk arm arm926ejs 62d636aa 2014-08-22 Rishi Bhattacharya <rishi(a)ti.com> -p1023rds powerpc mpc85xx d0bc5140 2014-07-22 Roy Zang <tie-fei.zang(a)freescale.com> -spc1920 powerpc mpc8xx 98ad54be 2014-07-07 -v37 powerpc mpc8xx b8c1438a 2014-07-07 -fads powerpc mpc8xx 03f9d7d1 2014-07-07 -netphone powerpc mpc8xx c51c1c9a 2014-07-07 -netta2 powerpc mpc8xx c51c1c9a 2014-07-07 -netta powerpc mpc8xx c51c1c9a 2014-07-07 -rbc823 powerpc mpc8xx c750b9c0 2014-07-07 -quantum powerpc mpc8xx 0657e46e 2014-07-07 -RPXlite_dw powerpc mpc8xx 0657e46e 2014-07-07 -qs850 powerpc mpc8xx dab0f762 2014-07-07 -qs860t powerpc mpc8xx dab0f762 2014-07-07 -simpc8313 powerpc mpc83xx 7445207f 2014-06-05 Ron Madrid <info(a)sheldoninst.com> -hidden_dragon powerpc mpc824x 3fe1a854 2014-05-30 Yusdi Santoso <yusdi_santoso(a)adaptec.com> -debris powerpc mpc824x 7edb1f7b 2014-05-30 Sangmoon Kim <dogoil(a)etinsys.com> -kvme080 powerpc mpc824x 2868f862 2014-05-30 Sangmoon Kim <dogoil(a)etinsys.com> -ep8248 powerpc mpc8260 49ad566d 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -ispan powerpc mpc8260 80bae39a 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -rattler powerpc mpc8260 d0664db4 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -zpc1900 powerpc mpc8260 6f80bb48 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -mpc8260ads powerpc mpc8260 facb6725 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -adder powerpc mpc8xx 373a9788 2014-05-30 Yuli Barcohen <yuli(a)arabellasw.com> -quad100hd powerpc ppc405ep 3569571d 2014-05-30 Gary Jennejohn <gljennjohn(a)googlemail.com> -incaip mips mips32 538cf92c 2014-04-20 Wolfgang Denk <wd(a)denx.de> -lubbock arm pxa 36bf57b 2014-04-18 Kyle Harris <kharris(a)nexus-tech.net> -EVB64260 powerpc mpc824x bb3aef9 2014-04-18 -MOUSSE powerpc mpc824x 03f2ecc 2014-04-18 -rsdproto powerpc mpc8260 8b043e6 2014-04-18 -RPXsuper powerpc mpc8260 0ebf5f5 2014-04-18 -RPXClassic powerpc mpc8xx 4fb3925 2014-04-18 -RPXlite powerpc mpc8xx 4fb3925 2014-04-18 -FADS powerpc mpc8xx aa6e1e4 2014-04-18 -genietv powerpc mpc8xx b8a49bd 2014-04-18 -mbx8xx powerpc mpc8xx d6b11fd 2014-04-18 -nx823 powerpc mpc8xx a146e8b 2014-04-18 -idmr m68k mcf52x2 ba650e9b 2014-01-28 -M5271EVB m68k mcf52x2 ba650e9b 2014-01-28 -dvl_host arm ixp e317de6b 2014-01-28 Michael Schwingen <michael(a)schwingen.org> -actux4 arm ixp 6ff7aafa 2014-01-28 Michael Schwingen <michael(a)schwingen.org> -actux3 arm ixp 38da33f3 2014-01-28 Michael Schwingen <michael(a)schwingen.org> -actux2 arm ixp 13e0ee7f 2014-01-28 Michael Schwingen <michael(a)schwingen.org> -actux1 arm ixp 373ee048 2014-01-28 Michael Schwingen <michael(a)schwingen.org> -mx1ads arm arm920t e570aca9 2014-01-13 -mini2440 arm arm920t af5b9b1f 2014-01-13 Gabriel Huau <contact(a)huau-gabriel.fr> -omap730p2 arm arm926ejs 79c5c08d 2013-11-11 -pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger <wg(a)grandegger.com> -pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr(a)denx.de> -scpu arm ixp 304db0b 2013-09-24 Stefan Roese <sr(a)denx.de> -omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta <kshitij(a)ti.com> -CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs <matthias.fuchs(a)esd.eu> -omap2420h4 arm omap24xx 7f5eef9 2013-06-04 Richard Woodruff <r-woodruff2(a)ti.com> -Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 -Yukon8220 powerpc mpc8220 d6ed322 2013-05-11 -sorcery powerpc mpc8220 d6ed322 2013-05-11 -smdk6400 arm arm1176 52587f1 2013-04-12 Zhong Hongbo <bocui107(a)gmail.com> -ns9750dev arm arm926ejs 4cfc611 2013-02-28 Markus Pietrek <mpietrek(a)fsforth.de> -eNET x86 x86 7e8c53d 2013-02-14 Graeme Russ <graeme.russ(a)gmail.com> -PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd(a)denx.de> -PCIPPC6 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd(a)denx.de> -AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd(a)denx.de> -c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd(a)denx.de> -EP88x powerpc mpc885 1b0757e 2012-10-28 -ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd(a)denx.de> -IAD210 powerpc mpc860 1b0757e 2012-10-28 - -LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd(a)denx.de> -SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg(a)denx.de> -SX1 arm arm925t 53c4154 2012-10-26 -TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr(a)denx.de> -ADCIOP powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> -DASA_SIM powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> -apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park(a)samsung.com> -tb0229 mips mips32 3f3110d 2011-12-12 -OXC powerpc MPC8240 309a292 2011-12-07 -BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling(a)eltec.de> -xm250 arm pxa c477d72 2011-11-25 -pleb2 arm pxa d299173 2011-11-25 -cradle arm pxa 00c4aca 2011-11-25 Kyle Harris <kharris(a)nexus-tech.net> -cerf250 arm pxa f13eba6 2011-11-25 Prakash Kumar <prakash(a)embedx.com> -mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad(a)yahoo.com> -ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr(a)denx.de> -ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris(a)nexus-tech.net> -zylonite arm pxa b66521a 2011-09-05 -shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof(a)sysgo.de> -modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info(a)elste.org> -lpc2292sodimm arm arm720t d1a067a 2011-09-05 -lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu(a)sysgo.de> -impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag(a)sysgo.de> -gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis(a)mvista.com> -evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt(a)cucy.com> -ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag(a)sysgo.de> -dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu(a)sysgo.de> -SMN42 arm arm720t 6aac646 2011-09-05 -at91rm9200dk arm arm920t 1c85752 2011-07-17 -m501sk arm arm920t b1a2bd4 2011-07-17 -kb9202 arm arm920t 5bd3814 2011-07-17 -csb637 arm arm920t d14af08 2011-07-17 -cmc_pu2 arm arm920t 37a9b4d 2011-07-17 -at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian(a)popies.net> -voiceblue arm arm925t 1b793a4 2011-07-17 -smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj(a)denx.de> -sbc2410x arm arm920t 1f7f0ed 2011-07-17 -netstar arm arm925t 6ea2405 2011-07-17 -mx1fs2 arm arm920t 6962419 2011-07-17 -lpd7a404 arm lh7a40x 957731e 2011-07-17 -edb9301 arm arm920t 716f7ad 2011-07-17 -edb9302 arm arm920t 716f7ad 2011-07-17 -edb9302a arm arm920t 716f7ad 2011-07-17 -edb9307 arm arm920t 716f7ad 2011-07-17 -edb9307a arm arm920t 716f7ad 2011-07-17 -edb9312 arm arm920t 716f7ad 2011-07-17 -edb9315 arm arm920t 716f7ad 2011-07-17 -edb9315a arm arm920t 716f7ad 2011-07-17 -B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian(a)dave-tech.it> -armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel(a)diwalabs.com> -assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis(a)mvista.com> -trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj(a)denx.de> -mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric(a)eukrea.com> -barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman(a)barco.com> -ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand(a)peppercon.de> -VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent(a)elmeg.de> -xsengine ARM PXA2xx 4262a7c 2010-10-20 -wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh(a)etc.sk> -delta ARM PXA2xx 75e2035 2010-10-20 -NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd(a)denx.de> -CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd(a)denx.de> -logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl(a)gmx.at> -CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg(a)denx.de> -PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd(a)denx.de> -HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd(a)denx.de> -GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas(a)corelatus.se> -AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23 -suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi(a)atmark-techno.com> -XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr(a)monstr.eu> -MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz(a)matrix-vision.de> -adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi(a)eurotech.com> -R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau(a)labxtechnologies.com> -CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs(a)esd-electronics.com> +in the imperishable depths of the git history. Please use the tools +git provides to read through this history. diff --git a/scripts/fill_scrapyard.py b/scripts/fill_scrapyard.py deleted file mode 100755 index 55a7f382cf43..000000000000 --- a/scripts/fill_scrapyard.py +++ /dev/null @@ -1,165 +0,0 @@ -#!/usr/bin/env python2 -# SPDX-License-Identifier: GPL-2.0+ -# -# Author: Masahiro Yamada <yamada.m(a)jp.panasonic.com> -# - -""" -Fill the "Commit" and "Removed" fields of doc/README.scrapyard - -The file doc/README.scrapyard is used to keep track of removed boards. - -When we remove support for boards, we are supposed to add entries to -doc/README.scrapyard leaving "Commit" and "Removed" fields blank. - -The "Commit" field is the commit hash in which the board was removed -and the "Removed" is the date at which the board was removed. Those -two are known only after the board removal patch was applied, thus they -need to be filled in later. - -This effectively means that the person who removes other boards is -supposed to fill in the blank fields before adding new entries to -doc/README.scrapyard. - -That is a really tedious task that should be automated. -This script fills the blank fields of doc/README.scrapyard for you! - -Usage: - -The "Commit" and "Removed" fields must be "-". The other fields should -have already been filled in by a former commit. - -Run - scripts/fill_scrapyard.py -""" - -import os -import subprocess -import sys -import tempfile - -DOC='doc/README.scrapyard' - -def get_last_modify_commit(file, line_num): - """Get the commit that last modified the given line. - - This function runs "git blame" against the given line of the given - file and returns the commit hash that last modified it. - - Arguments: - file: the file to be git-blame'd. - line_num: the line number to be git-blame'd. This line number - starts from 1, not 0. - - Returns: - Commit hash that last modified the line. The number of digits is - long enough to form a unique commit. - """ - result = subprocess.check_output(['git', 'blame', '-L', - '%d,%d' % (line_num, line_num), file]) - commit = result.split()[0] - - if commit[0] == '^': - sys.exit('%s: line %d: ' % (file, line_num) + - 'this line was modified before the beginning of git history') - - if commit == '0' * len(commit): - sys.exit('%s: line %d: locally modified\n' % (file, line_num) + - 'Please run this script in a clean repository.') - - return commit - -def get_committer_date(commit): - """Get the committer date of the given commit. - - This function returns the date when the given commit was applied. - - Arguments: - commit: commit-ish object. - - Returns: - The committer date of the given commit in the form YY-MM-DD. - """ - committer_date = subprocess.check_output(['git', 'show', '-s', - '--format=%ci', commit]) - return committer_date.split()[0] - -def move_to_topdir(): - """Change directory to the top of the git repository. - - Or, exit with an error message if called out of a git repository. - """ - try: - toplevel = subprocess.check_output(['git', 'rev-parse', - '--show-toplevel']) - except subprocess.CalledProcessError: - sys.exit('Please run in a git repository.') - - # strip '\n' - toplevel = toplevel.rstrip() - - # Change the current working directory to the toplevel of the respository - # for our easier life. - os.chdir(toplevel) - -class TmpFile: - - """Useful class to handle a temporary file. - - tempfile.mkstemp() is often used to create a unique temporary file, - but what is inconvenient is that the caller is responsible for - deleting the file when done with it. - - Even when the caller errors out on the way, the temporary file must - be deleted somehow. The idea here is that we delete the file in - the destructor of this class because the destructor is always - invoked when the instance of the class is freed. - """ - - def __init__(self): - """Constructor - create a temporary file""" - fd, self.filename = tempfile.mkstemp() - self.file = os.fdopen(fd, 'w') - - def __del__(self): - """Destructor - delete the temporary file""" - try: - os.remove(self.filename) - except: - pass - -def main(): - move_to_topdir() - - line_num = 1 - - tmpfile = TmpFile() - for line in open(DOC): - tmp = line.split(None, 5) - modified = False - - if len(tmp) >= 5: - # fill "Commit" field - if tmp[3] == '-': - tmp[3] = get_last_modify_commit(DOC, line_num) - modified = True - # fill "Removed" field - if tmp[4] == '-': - tmp[4] = get_committer_date(tmp[3]) - if modified: - line = tmp[0].ljust(17) - line += tmp[1].ljust(12) - line += tmp[2].ljust(15) - line += tmp[3].ljust(12) - line += tmp[4].ljust(12) - if len(tmp) >= 6: - line += tmp[5] - line = line.rstrip() + '\n' - - tmpfile.file.write(line) - line_num += 1 - - os.rename(tmpfile.filename, DOC) - -if __name__ == '__main__': - main() -- 2.7.4

2 3

[U-Boot] [PATCH v1] common: fix building image.c
by Igor Opaniuk 30 Aug '19

30 Aug '19

From: Igor Opaniuk <igor.opaniuk(a)toradex.com> Wrap image_decomp() and all dependent functions with !ifdef(USE_HOSTCC) macro, as this function isn't used by any tool from /tools. Without this it leads to compilation issues (because of CONFIG_LZMA from newly added #include <generated/autoconf.h> statement, which pulls all these definitions): In file included from tools/common/image.c:1:0: ./tools/../common/image.c: In function ‘image_decomp’: ./tools/../common/image.c:428:9: warning: implicit declaration of function ‘gunzip’; did you mean ‘munmap’? [-Wimplicit-function-declaration] ret = gunzip(load_buf, unc_len, image_buf, &image_len); ^~~~~~ munmap ./tools/../common/image.c:450:3: error: unknown type name ‘SizeT’; did you mean ‘size_t’? SizeT lzma_len = unc_len; ^~~~~ size_t ./tools/../common/image.c:452:9: warning: implicit declaration of function ‘lzmaBuffToBuffDecompress’ [-Wimplicit-function-declaration] ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len, ^~~~~~~~~~~~~~~~~~~~~~~~ scripts/Makefile.host:114: recipe for target 'tools/common/image.o' failed Fixes: 2aa7f0fa51 ("habv4: tools: Avoid hardcoded CSF size for SPL target") Signed-off-by: Igor Opaniuk <igor.opaniuk(a)toradex.com> --- common/image-fit.c | 5 ++++- common/image.c | 3 +-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/common/image-fit.c b/common/image-fit.c index 5c63c769de..72b19f889b 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1728,6 +1728,7 @@ int fit_conf_get_prop_node(const void *fit, int noffset, return fit_conf_get_prop_node_index(fit, noffset, prop_name, 0); } +#ifndef USE_HOSTCC static int fit_image_select(const void *fit, int rd_noffset, int verify) { fit_image_print(fit, rd_noffset, " "); @@ -1743,6 +1744,7 @@ static int fit_image_select(const void *fit, int rd_noffset, int verify) return 0; } +#endif /* USE_HOSTCC */ int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, ulong addr) @@ -1771,6 +1773,7 @@ int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, return noffset; } +#ifndef USE_HOSTCC /** * fit_get_image_type_property() - get property name for IH_TYPE_... * @@ -2010,6 +2013,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr, } else { loadbuf = map_sysmem(load, max_decomp_len); } + if (image_decomp(comp, load, data, image_type, loadbuf, buf, len, max_decomp_len, &load_end)) { printf("Error decompressing %s\n", prop_name); @@ -2065,7 +2069,6 @@ int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, return ret; } -#ifndef USE_HOSTCC int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, const char **fit_unamep, const char **fit_uname_configp, int arch, ulong *datap, ulong *lenp) diff --git a/common/image.c b/common/image.c index e94bbcf108..27a412e2c8 100644 --- a/common/image.c +++ b/common/image.c @@ -384,6 +384,7 @@ void image_print_contents(const void *ptr) } } +#ifndef USE_HOSTCC /** * print_decomp_msg() - Print a suitable decompression/loading message * @@ -484,8 +485,6 @@ int image_decomp(int comp, ulong load, ulong image_start, int type, return ret; } - -#ifndef USE_HOSTCC #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) /** * image_get_ramdisk - get and verify ramdisk image -- 2.17.1

3 2