December 2019 - U-Boot

[U-Boot] [PATCH RESEND v2 00/10] dma: ti: k3-udma: Add support for J721e
by Vignesh Raghavendra 02 Dec '19

02 Dec '19

This series adds DMA support for J721e using exist K3 UDMA driver. One main change is thati, on J721e, DMA resources such as DMA channels are shared between different entities running on different cores of the SoC. Therefore, U-Boot running on A72 core should request range of resources allocated to it from centralized resource management core (DMSC) and use only the allocated resource. First two patches adds support for dynamically querying and using allocated resources. Remaining patches fix issues when using UDMA driver on a 32 bit core like R5. Last patch adds a new compatible for J721e Vignesh Raghavendra (10): lib: Import few bitmap functions from Linux dma: ti: k3-udma: Query DMA channels allocated from Resource Manager soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle dma: ti: k3-udma: Remove coherency check for cache ops dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers dma: ti: k3-udma: Switch to exposed ring mode dma: ti: k3-udma: Fix ring push operation for 32 bit cores dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms dma: ti: k3-udma: Add new compatible to J721e drivers/dma/ti/k3-udma-hwdef.h | 19 ++ drivers/dma/ti/k3-udma.c | 346 ++++++++++++++++++++---------- drivers/soc/ti/k3-navss-ringacc.c | 13 +- include/linux/bitmap.h | 133 ++++++++++++ include/linux/bitops.h | 12 ++ 5 files changed, 403 insertions(+), 120 deletions(-) -- 2.24.0

2 12

[U-Boot] [PATCH] rockchip: config: add support for firefly-px30 board
by Kever Yang 02 Dec '19

02 Dec '19

This is a core board named Core-PX30-JD4 with a mainboard from Firefly, name it as firefly-px30 for now. This board can re-use the dts of PX30, the only difference is the UART IO, the firefly use UART2 M1 while evb use UART2 M0. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- board/rockchip/evb_px30/MAINTAINERS | 1 + configs/firefly-px30_defconfig | 113 ++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+) create mode 100644 configs/firefly-px30_defconfig diff --git a/board/rockchip/evb_px30/MAINTAINERS b/board/rockchip/evb_px30/MAINTAINERS index cf13f2419e..4dc060c501 100644 --- a/board/rockchip/evb_px30/MAINTAINERS +++ b/board/rockchip/evb_px30/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/rockchip/evb_px30 F: include/configs/evb_px30.h F: configs/evb-px30_defconfig +F: configs/firefly-px30_defconfig diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig new file mode 100644 index 0000000000..fa4ac75b09 --- /dev/null +++ b/configs/firefly-px30_defconfig @@ -0,0 +1,113 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ROCKCHIP_PX30=y +CONFIG_TARGET_EVB_PX30=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xFF160000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_SPL_TEXT_BASE=0x00000000 +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_CONSOLE_MUX is not set +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-evb.dtb" +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_STACK_R=y +# CONFIG_TPL_BANNER_PRINT is not set +CONFIG_SPL_CRC32_SUPPORT=y +CONFIG_SPL_ATF=y +# CONFIG_TPL_FRAMEWORK is not set +# CONFIG_CMD_BOOTD is not set +CONFIG_DEBUG_UART2_CHANNEL=1 +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LZMADEC is not set +# CONFIG_CMD_UNZIP is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="px30-evb" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0x800800 +CONFIG_FASTBOOT_BUF_SIZE=0x04000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_ROCKCHIP_OTP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_ROCKCHIP_SDRAM_COMMON=y +CONFIG_DM_RESET=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +# CONFIG_TPL_DM_SERIAL is not set +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_SOUND=y +CONFIG_SYSRESET=y +CONFIG_OPTEE=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LCD=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y +CONFIG_LZ4=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y +# CONFIG_EFI_LOADER is not set -- 2.17.1

1 0

[U-Boot] [PATCH v3] gpio: at91_gpio: Add bank names
by James Byrne 02 Dec '19

02 Dec '19

Make the at91_gpio driver set sensible GPIO bank names in the platform data. This makes the 'gpio status' command a lot more useful. Signed-off-by: James Byrne <james.byrne(a)origamienergy.com> --- Changes in v3: - Move at91_get_bank_name() into #ifdef CONFIG_DM_GPIO section. Changes in v2: - Use "undefined" for an unknown bank name. drivers/gpio/at91_gpio.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 965becf77a..dbfed72c61 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -556,6 +556,28 @@ static int at91_gpio_get_function(struct udevice *dev, unsigned offset) return GPIOF_INPUT; } +static const char *at91_get_bank_name(uint32_t base_addr) +{ + switch (base_addr) { + case ATMEL_BASE_PIOA: + return "PIOA"; + case ATMEL_BASE_PIOB: + return "PIOB"; + case ATMEL_BASE_PIOC: + return "PIOC"; +#if (ATMEL_PIO_PORTS > 3) + case ATMEL_BASE_PIOD: + return "PIOD"; +#if (ATMEL_PIO_PORTS > 4) + case ATMEL_BASE_PIOE: + return "PIOE"; +#endif +#endif + } + + return "undefined"; +} + static const struct dm_gpio_ops gpio_at91_ops = { .direction_input = at91_gpio_direction_input, .direction_output = at91_gpio_direction_output, @@ -582,14 +604,15 @@ static int at91_gpio_probe(struct udevice *dev) clk_free(&clk); - uc_priv->bank_name = plat->bank_name; - uc_priv->gpio_count = GPIO_PER_BANK; - #if CONFIG_IS_ENABLED(OF_CONTROL) plat->base_addr = (uint32_t)devfdt_get_addr_ptr(dev); #endif + plat->bank_name = at91_get_bank_name(plat->base_addr); port->regs = (struct at91_port *)plat->base_addr; + uc_priv->bank_name = plat->bank_name; + uc_priv->gpio_count = GPIO_PER_BANK; + return 0; } -- 2.24.0

2 1

[U-Boot] [PATCH] board: Remove unnecessary inclusion of micrel.h from boards
by James Byrne 02 Dec '19

02 Dec '19

Several boards still unnecessarily included micrel.h but no longer require it since the switch to Device Tree configuration. Signed-off-by: James Byrne <james.byrne(a)origamienergy.com> --- board/atmel/sama5d3xek/sama5d3xek.c | 2 -- board/kosagi/novena/novena.c | 2 -- board/seco/mx6quq7/mx6quq7.c | 1 - board/toradex/colibri_imx6/colibri_imx6.c | 1 - board/tqc/tqma6/tqma6_wru4.c | 1 - 5 files changed, 7 deletions(-) diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index acf61486d2..331d31cfc7 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -14,8 +14,6 @@ #include <debug_uart.h> #include <env.h> #include <linux/ctype.h> -#include <phy.h> -#include <micrel.h> #include <spl.h> #include <asm/arch/atmel_mpddrc.h> #include <asm/arch/at91_wdt.h> diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c index b7b747d196..45c8e798b6 100644 --- a/board/kosagi/novena/novena.c +++ b/board/kosagi/novena/novena.c @@ -32,8 +32,6 @@ #include <linux/fb.h> #include <linux/input.h> #include <malloc.h> -#include <micrel.h> -#include <miiphy.h> #include <mmc.h> #include <netdev.h> #include <power/pmic.h> diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c index c1e36b652e..c0a93175fb 100644 --- a/board/seco/mx6quq7/mx6quq7.c +++ b/board/seco/mx6quq7/mx6quq7.c @@ -26,7 +26,6 @@ #include <ipu_pixfmt.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> -#include <micrel.h> #include <asm/mach-imx/mxc_i2c.h> #include <i2c.h> diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index ad40b589c1..39718b567d 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -27,7 +27,6 @@ #include <dm/platform_data/serial_mxc.h> #include <fsl_esdhc_imx.h> #include <imx_thermal.h> -#include <micrel.h> #include <miiphy.h> #include <netdev.h> #include <cpu.h> diff --git a/board/tqc/tqma6/tqma6_wru4.c b/board/tqc/tqma6/tqma6_wru4.c index 99196ad685..6095bf3926 100644 --- a/board/tqc/tqma6/tqma6_wru4.c +++ b/board/tqc/tqma6/tqma6_wru4.c @@ -25,7 +25,6 @@ #include <linux/libfdt.h> #include <malloc.h> #include <i2c.h> -#include <micrel.h> #include <miiphy.h> #include <mmc.h> #include <netdev.h> -- 2.24.0

2 1

[U-Boot] [PATCH] configs: ls1028a: enable OF_LIBFDT_OVERLAY
by Alex Marginean 02 Dec '19

02 Dec '19

LS1028A QDS board supports multiple combinations of SerDes protocols and multiple add-on cards with Ethernet PHYs. Some of them require specific configuration in Linux DT, and the plan is to use DT overlays for them. Signed-off-by: Alex Marginean <alexandru.marginean(a)nxp.com> --- configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028aqds_tfa_defconfig | 1 + configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index fadb13d469..713a088e42 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -71,4 +71,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_RSA=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index b690e24c7f..b5eb872148 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -73,4 +73,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index cbbe649485..dc07a0a4d7 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -71,4 +71,5 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y CONFIG_RSA=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 35c46d4dd7..644c5ac6bb 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -74,4 +74,5 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_WDT=y CONFIG_WDT_SP805=y +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y -- 2.17.1

2 2

[U-Boot] [v2] armv8: ls1043aqds: modify the qspi_bootcmd definition
by Wen He 02 Dec '19

02 Dec '19

Fix the kernel offset of qspi_bootcmd scripts, followed the qoriq_memory_layout definition. Signed-off-by: Wen He <wen.he_1(a)nxp.com> --- include/configs/ls1043a_common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 70447a2183..15ff96f6a9 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -275,8 +275,8 @@ "source ${scriptaddr}\0" \ "qspi_bootcmd=echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ - "$kernel_addr $kernel_size; env exists secureboot " \ - "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernel_start $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_start " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ "nor_bootcmd=echo Trying load from nor..;" \ -- 2.17.1

2 2

[U-Boot] [v3] include/configs: ls1012a: add pfe stop command
by Biwen Li 02 Dec '19

02 Dec '19

This adds pfe stop command before boot linux kernel to fix a problem that ethernet won't be workable after enter linux. Because there is a h/w limitation in LS1012A PFE, to re-initialize PFE it has to be safe shutdown, these steps are done through PFE stop. Signed-off-by: Biwen Li <biwen.li(a)nxp.com> --- Changes in v3: - update description Changes in v2: - trim subject - add why include/configs/ls1012a2g5rdb.h | 2 +- include/configs/ls1012afrdm.h | 2 +- include/configs/ls1012afrwy.h | 4 ++-- include/configs/ls1012ardb.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index cb329385d9..5943b69716 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -85,7 +85,7 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ + "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 8c7d4e558d..8a3ebf06f2 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -60,7 +60,7 @@ "installer=load usb 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ + "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 1b0f1566d3..a2ca326cfc 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -109,13 +109,13 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ + "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" \ - "sd_bootcmd=echo Trying load from sd card..;" \ + "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd ;" \ "env exists secureboot && mmc read $kernelheader_addr_r "\ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index a5e27404f8..39166fea7d 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -109,7 +109,7 @@ "installer=load mmc 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ + "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size; env exists secureboot " \ "&& sf read $kernelheader_addr_r $kernelheader_addr " \ -- 2.17.1

2 1

[U-Boot] [PATCH] board: fsl: lx2160a: Fix the typo in board_fix_fdt
by Pankaj Bansal 02 Dec '19

02 Dec '19

Fix a typo that caused incorrect reg-name for pcie node in lx2160a rev2. Fixes: 5d535aa40b ("board: fsl: lx2160a: implement board_fix_fdt") Signed-off-by: Pankaj Bansal <pankaj.bansal(a)nxp.com> --- board/freescale/lx2160a/lx2160a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index eff12747b4..e5b7fec9a4 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -128,7 +128,7 @@ int board_fix_fdt(void *fdt) char *old_str; char *new_str; } reg_names_map[] = { - { "ccsr", "dip" }, + { "ccsr", "dbi" }, { "pf_ctrl", "ctrl" } }; int off = -1, i; -- 2.17.1

2 2

[U-Boot] [PATCH v2] configs: ls1028a: enable CMD_DM
by Alex Marginean 02 Dec '19

02 Dec '19

Since at least some of the drivers relevant to LS1028A are now following DM, it's useful to have dm command enabled by default. Signed-off-by: Alex Marginean <alexandru.marginean(a)nxp.com> --- Changes in v2: fixed checkpatch warning configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028aqds_tfa_defconfig | 1 + configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1028ardb_tfa_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index e2fed911b1..fadb13d469 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 67c9a82bcd..b690e24c7f 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -15,6 +15,7 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 6b87c57ec3..cbbe649485 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index 1fd38ca3d4..35c46d4dd7 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -15,6 +15,7 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -- 2.17.1

2 1

[U-Boot] [PATCH v3] armv8: ls1028a: Add environment variables to facilitate the boot
by Yuantian Tang 02 Dec '19

02 Dec '19

Add some environment variables to facilitate the auto boot. Signed-off-by: Yuantian Tang <andy.tang(a)nxp.com> --- v3: - rebase to the latest code include/configs/ls1028a_common.h | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 0db86396e9..022981bfa3 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -67,6 +67,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ func(USB, usb, 0) #include <config_distro_bootcmd.h> @@ -127,25 +128,46 @@ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ "&& esbc_validate ${scripthdraddr};" \ "source ${scriptaddr}\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ "mmcinfo; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ "emmc_bootcmd=echo Trying load from EMMC ..;" \ "mmcinfo; mmc dev 1; mmc read $load_addr " \ "$kernel_addr_sd $kernel_size_sd && " \ "env exists secureboot && mmc read $kernelheader_addr_r " \ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" #undef CONFIG_BOOTCOMMAND +#define XSPI_NOR_BOOTCOMMAND \ + "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \ + "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND \ - "run distro_bootcmd;run sd_bootcmd; " \ + "run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" +#define SD2_BOOTCOMMAND \ + "run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \ "env exists secureboot && esbc_halt;" /* Monitor Command Prompt */ -- 2.17.1

2 1