December 2019 - U-Boot

[PATCH 1/1] cmd: add rng command
by Heinrich Schuchardt 24 Dec '19

24 Dec '19

For the RNG uclass we currently only have a test working on the sandbox. Provide a command to test the hardware random number generator on non-sandbox systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- This patch depends on Sughosh Ganu's: [PATCH v4 8/8] virtio: rng: Add a random number generator(rng) driver https://lists.denx.de/pipermail/u-boot/2019-December/394018.html --- cmd/Kconfig | 7 +++++++ cmd/Makefile | 1 + cmd/rng.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+) create mode 100644 cmd/rng.c diff --git a/cmd/Kconfig b/cmd/Kconfig index 1e4cf146c5..d39cfaa13b 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1657,6 +1657,13 @@ config CMD_GETTIME milliseconds. See also the 'bootstage' command which provides more flexibility for boot timing. +config CMD_RNG + bool "rng command" + depends on DM_RNG + select HEXDUMP + help + Print bytes from the hardware random number generator. + # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" diff --git a/cmd/Makefile b/cmd/Makefile index 3ac7104546..7cb182d915 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -116,6 +116,7 @@ obj-$(CONFIG_CMD_READ) += read.o obj-$(CONFIG_CMD_REGINFO) += reginfo.o obj-$(CONFIG_CMD_REISER) += reiser.o obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o +obj-$(CONFIG_CMD_RNG) += rng.o obj-$(CONFIG_CMD_ROCKUSB) += rockusb.o obj-$(CONFIG_SANDBOX) += host.o obj-$(CONFIG_CMD_SATA) += sata.o diff --git a/cmd/rng.c b/cmd/rng.c new file mode 100644 index 0000000000..ce91af77a8 --- /dev/null +++ b/cmd/rng.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * The 'rng' command prints bytes from the hardware random number generator. + * + * Copyright (c) 2019, Heinrich Schuchardt <xypron.glpk(a)gmx.de> + */ +#include <common.h> +#include <command.h> +#include <dm.h> +#include <hexdump.h> +#include <rng.h> + +static int do_rng(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + size_t n = 0x40; + struct udevice *dev; + void *buf; + int ret = CMD_RET_SUCCESS; + + if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { + printf("No RNG device\n"); + return CMD_RET_FAILURE; + } + + if (argc >= 2) + n = simple_strtoul(argv[1], NULL, 16); + + buf = malloc(n); + if (!buf) { + printf("Out of memory\n"); + return CMD_RET_FAILURE; + } + + if (dm_rng_read(dev, buf, n)) { + printf("Reading RNG failed\n"); + ret = CMD_RET_FAILURE; + } else { + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, n); + } + + free(buf); + + return ret; +} + +#ifdef CONFIG_SYS_LONGHELP +static char rng_help_text[] = + "[n]\n" + " - print n random bytes\n"; +#endif + +U_BOOT_CMD( + rng, 2, 0, do_rng, + "print bytes from the hardware random number generator", + rng_help_text +); -- 2.24.0

1 0

I change chip main of the pico-imx7D SOM module. Now I need put u-boot.imx(bin) using imx_uart
by Neuber Sousa 24 Dec '19

24 Dec '19

Hi, https://community.nxp.com/thread/520887 https://forum.digikey.com/t/re-pico-pi-imx7-and-siging-in-um/2537/208 *(Please look at my last 10 posts.) * I have these issues above. When I tried theses commands: .*/imx_uart* /dev/ttyUSB0 mx7_usb_work.conf u-boot.imx & *imx_usb u-boot.imx* (of course, conform github, imx_usb wouldn’t work because the SOM is dead) How can I put u-boot.imx in pico-imx7d SOM module/baseboard with new main chip (MCIMX7D7DVM10SC)

1 0

pull request u-boot-mpc85xx to next branch
by Priyanka Jain 24 Dec '19

24 Dec '19

Dear Tom, Please find my pull-request for u-boot-mpc85xx/master https://travis-ci.org/p-priyanka-jain/u-boot/builds/628982496 Summary enable DM driver on ppc/km boards enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 Some updates in mpc85xx-ddr driver, km boards priyankajain --------------- The following changes since commit c0912f9bbfb26dd03d189953678691b799d35b6e: Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next (2019-12-18 07:20:19 -0500) are available in the Git repository at: https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx.git HEAD for you to fetch changes up to 4466b99703197c6258aded7728eed7c292343a43: ppc/km: enable DM driver support in all defconfigs (2019-12-23 14:08:27 +0530) ---------------------------------------------------------------- Holger Brunck (5): ppc/km/tegr1: support second localbus clock signal ppc/km: convert KM_DEF_NETDEV to Kconfig board/km: remove CONFIG_KM_BOARD_NAME ppc/kmeter1: remove unused define ppc/km: enable DM driver support in all defconfigs Joakim Tjernlund (1): mpc85xx: ddr: Always start DDR RAM in Self Refresh mode Ran Wang (19): arch: powerpc: add usb node in p3041 dts configs: p3041ds: enable CONFIG_DM_USB support arch: powerpc: add usb nodes to P1020 dts configs: p1020: enable CONFIG_DM_USB support arch: powerpc: add usb node to p2020 dts configs: P2020: enable CONFIG_DM_USB support arch: powerpc: add usb node to p2041 dts configs: P2041: enable CONFIG_DM_USB support arch: powerpc: add usb nodes to P4080 dts configs: P4080: enable CONFIG_DM_USB support powerpc: add usb nodes to T102x dts configs: T102x: enable CONFIG_DM_USB support arch: powerpc: add usb nodes to T104x dts configs: T104x: enable CONFIG_DM_USB support configs: T208x: enable CONFIG_DM_USB support arch: powerpc: add usb nodes to T4240 dts configs: T4240: enable CONFIG_DM_USB support arch: powerpc: add usb nodes to P5040 dts configs: P5040: enable CONFIG_DM_USB support arch/powerpc/dts/p1020-post.dtsi | 13 +++++++++++++ arch/powerpc/dts/p2020-post.dtsi | 6 ++++++ arch/powerpc/dts/p2041.dtsi | 12 ++++++++++++ arch/powerpc/dts/p3041.dtsi | 12 ++++++++++++ arch/powerpc/dts/p4080.dtsi | 12 ++++++++++++ arch/powerpc/dts/p5040.dtsi | 12 ++++++++++++ arch/powerpc/dts/t102x.dtsi | 12 ++++++++++++ arch/powerpc/dts/t104x.dtsi | 12 ++++++++++++ arch/powerpc/dts/t4240.dtsi | 12 ++++++++++++ board/keymile/Kconfig | 6 ++++++ board/keymile/km83xx/km83xx.c | 2 +- board/keymile/kmp204x/kmp204x.c | 2 +- configs/P1020MBG-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020MBG-PC_36BIT_defconfig | 1 + configs/P1020MBG-PC_SDCARD_defconfig | 1 + configs/P1020MBG-PC_defconfig | 1 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 1 + configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_defconfig | 1 + configs/P1020RDB-PC_NAND_defconfig | 1 + configs/P1020RDB-PC_SDCARD_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_defconfig | 1 + configs/P1020RDB-PD_NAND_defconfig | 1 + configs/P1020RDB-PD_SDCARD_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_defconfig | 1 + configs/P1020UTM-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020UTM-PC_36BIT_defconfig | 1 + configs/P1020UTM-PC_SDCARD_defconfig | 1 + configs/P1020UTM-PC_defconfig | 1 + configs/P2020RDB-PC_36BIT_NAND_defconfig | 1 + configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_defconfig | 1 + configs/P2020RDB-PC_NAND_defconfig | 1 + configs/P2020RDB-PC_SDCARD_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_defconfig | 1 + configs/P2041RDB_NAND_defconfig | 1 + configs/P2041RDB_SDCARD_defconfig | 1 + configs/P2041RDB_SPIFLASH_defconfig | 1 + configs/P2041RDB_SRIO_PCIE_BOOT_defconfig | 1 + configs/P2041RDB_defconfig | 1 + configs/P3041DS_NAND_defconfig | 1 + configs/P3041DS_SDCARD_defconfig | 1 + configs/P3041DS_SPIFLASH_defconfig | 1 + configs/P3041DS_SRIO_PCIE_BOOT_defconfig | 1 + configs/P3041DS_defconfig | 1 + configs/P4080DS_SDCARD_defconfig | 1 + configs/P4080DS_SPIFLASH_defconfig | 1 + configs/P4080DS_SRIO_PCIE_BOOT_defconfig | 1 + configs/P4080DS_defconfig | 1 + configs/P5040DS_NAND_defconfig | 1 + configs/P5040DS_SDCARD_defconfig | 1 + configs/P5040DS_SPIFLASH_defconfig | 1 + configs/P5040DS_defconfig | 1 + configs/T1023RDB_NAND_defconfig | 1 + configs/T1023RDB_SDCARD_defconfig | 1 + configs/T1023RDB_SPIFLASH_defconfig | 1 + configs/T1023RDB_defconfig | 1 + configs/T1024QDS_DDR4_defconfig | 1 + configs/T1024QDS_NAND_defconfig | 1 + configs/T1024QDS_SDCARD_defconfig | 1 + configs/T1024QDS_SPIFLASH_defconfig | 1 + configs/T1024QDS_defconfig | 1 + configs/T1024RDB_NAND_defconfig | 1 + configs/T1024RDB_SDCARD_defconfig | 1 + configs/T1024RDB_SPIFLASH_defconfig | 1 + configs/T1024RDB_defconfig | 1 + configs/T1040D4RDB_NAND_defconfig | 1 + configs/T1040D4RDB_SDCARD_defconfig | 1 + configs/T1040D4RDB_SPIFLASH_defconfig | 1 + configs/T1040D4RDB_defconfig | 1 + configs/T1040QDS_DDR4_defconfig | 1 + configs/T1040QDS_defconfig | 1 + configs/T1040RDB_NAND_defconfig | 1 + configs/T1040RDB_SDCARD_defconfig | 1 + configs/T1040RDB_SPIFLASH_defconfig | 1 + configs/T1040RDB_defconfig | 1 + configs/T1042D4RDB_NAND_defconfig | 1 + configs/T1042D4RDB_SDCARD_defconfig | 1 + configs/T1042D4RDB_SPIFLASH_defconfig | 1 + configs/T1042D4RDB_defconfig | 1 + configs/T1042RDB_PI_NAND_defconfig | 1 + configs/T1042RDB_PI_SDCARD_defconfig | 1 + configs/T1042RDB_PI_SPIFLASH_defconfig | 1 + configs/T1042RDB_PI_defconfig | 1 + configs/T1042RDB_defconfig | 1 + configs/T2080RDB_NAND_defconfig | 1 + configs/T2080RDB_SDCARD_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2080RDB_SRIO_PCIE_BOOT_defconfig | 1 + configs/T2080RDB_defconfig | 1 + configs/T2081QDS_NAND_defconfig | 1 + configs/T2081QDS_SDCARD_defconfig | 1 + configs/T2081QDS_SPIFLASH_defconfig | 1 + configs/T2081QDS_SRIO_PCIE_BOOT_defconfig | 1 + configs/T2081QDS_defconfig | 1 + configs/T4240QDS_NAND_defconfig | 1 + configs/T4240QDS_SDCARD_defconfig | 1 + configs/T4240QDS_SRIO_PCIE_BOOT_defconfig | 1 + configs/T4240QDS_defconfig | 1 + configs/T4240RDB_SDCARD_defconfig | 1 + configs/T4240RDB_defconfig | 1 + configs/kmcoge4_defconfig | 2 ++ configs/kmcoge5ne_defconfig | 3 +++ configs/kmeter1_defconfig | 3 +++ configs/kmopti2_defconfig | 2 ++ configs/kmsupx5_defconfig | 2 ++ configs/kmtegr1_defconfig | 3 +++ configs/kmtepr2_defconfig | 2 ++ configs/suvd3_defconfig | 2 ++ configs/tuge1_defconfig | 2 ++ configs/tuxx1_defconfig | 2 ++ drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 13 ++++++------- include/configs/km/keymile-common.h | 7 +------ include/configs/km/km-mpc8309.h | 2 ++ include/configs/kmcoge5ne.h | 2 -- include/configs/kmeter1.h | 7 ------- include/configs/kmopti2.h | 1 - include/configs/kmp204x.h | 3 --- include/configs/kmsupx5.h | 1 - include/configs/kmtegr1.h | 18 +++++++++++++++++- include/configs/kmtepr2.h | 1 - include/configs/suvd3.h | 1 - include/configs/tuge1.h | 1 - include/configs/tuxx1.h | 1 - scripts/config_whitelist.txt | 2 -- 130 files changed, 254 insertions(+), 36 deletions(-)

2 1

[U-Boot] [PATCH v2 0/4] drivers: Add a framework for MUX drivers
by Jean-Jacques Hiblot 24 Dec '19

24 Dec '19

Add a new minimalistic subsystem that handles multiplexer controllers. It provides the same API as Linux and mux drivers should be portable with a minimum effort. This series also includes a port of the Linux's mmio-mux driver. This series relies on a series that extend the regmap [1]. [1] : https://patchwork.ozlabs.org/project/uboot/list/?series=140752 Changes in v2: - Fixed warning in mux_of_xlate_default() - Improved documentation - Fixed SPL build - insert the mux initialization in init_sequence_r[], just before the console is initialized as its serial port may be muxed - moved the definition of dm_mux_init() in this commit - Call sandbox_set_enable_memio(true) before running the test Jean-Jacques Hiblot (4): drivers: Add a new framework for multiplexer devices dm: board: complete the initialization of the muxes in initr_dm() drivers: mux: mmio-based syscon mux controller test: Add tests for the multiplexer framework arch/sandbox/dts/test.dts | 26 +++ common/board_r.c | 16 ++ configs/sandbox_defconfig | 2 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/mux/Kconfig | 22 +++ drivers/mux/Makefile | 7 + drivers/mux/mmio.c | 155 ++++++++++++++++++ drivers/mux/mux-uclass.c | 292 ++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/dt-bindings/mux/mux.h | 17 ++ include/mux-internal.h | 103 ++++++++++++ include/mux.h | 115 +++++++++++++ test/dm/Makefile | 1 + test/dm/mux-mmio.c | 147 +++++++++++++++++ 15 files changed, 907 insertions(+) create mode 100644 drivers/mux/Kconfig create mode 100644 drivers/mux/Makefile create mode 100644 drivers/mux/mmio.c create mode 100644 drivers/mux/mux-uclass.c create mode 100644 include/dt-bindings/mux/mux.h create mode 100644 include/mux-internal.h create mode 100644 include/mux.h create mode 100644 test/dm/mux-mmio.c -- 2.17.1

4 13

[U-Boot] [PATCH] mpc85xx: ddr: Always start DDR RAM in Self Refresh mode
by Joakim Tjernlund 24 Dec '19

24 Dec '19

Some of our t1042 boards fails DDR init with an Automatic calibration error every now and then. Investigations revealed that true Warm boots newer failed. Warm boots has some extra steps performed, one being to start DDRC in Self Refresh and then clearing SR right after. Applying this SR method unconditionally made all our boards stable again, regardless of Cold/Warm boot. Signed-off-by: Joakim Tjernlund <joakim.tjernlund(a)infinera.com> --- drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index a9b085db8c..952b296dd8 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -370,6 +370,8 @@ step2: debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2])); #endif /* part 1 of the workaound */ + /* Always start in self-refresh, clear after MEM_EN */ + setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); /* * 500 painful micro-seconds must elapse between @@ -382,8 +384,6 @@ step2: #ifdef CONFIG_DEEP_SLEEP if (is_warm_boot()) { - /* enter self-refresh */ - setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); /* do board specific memory setup */ board_mem_sleep_setup(); temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI); @@ -395,6 +395,10 @@ step2: out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + /* Exit self-refresh after DDR conf as some ddr memories can fail. */ + clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); + asm volatile("sync;isync"); + total_gb_size_per_controller = 0; for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (!(regs->cs[i].config & 0x80000000)) @@ -544,9 +548,4 @@ step2: clrbits_be32(&ddr->sdram_cfg, 0x2); } #endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */ -#ifdef CONFIG_DEEP_SLEEP - if (is_warm_boot()) - /* exit self-refresh */ - clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR); -#endif } -- 2.23.0

2 1

[PATCH v2 01/19] arch: powerpc: add usb node in p3041 dts
by Ran Wang 24 Dec '19

24 Dec '19

Signed-off-by: Ran Wang <ran.wang_1(a)nxp.com> --- Change in v2: - Rebase. arch/powerpc/dts/p3041.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/powerpc/dts/p3041.dtsi b/arch/powerpc/dts/p3041.dtsi index e873db2..6736d00 100644 --- a/arch/powerpc/dts/p3041.dtsi +++ b/arch/powerpc/dts/p3041.dtsi @@ -60,6 +60,18 @@ clock-frequency = <0x0>; }; + usb0: usb@fe210000 { + compatible = "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + phy_type = "utmi"; + }; + + usb1: usb@fe211000 { + compatible = "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + phy_type = "utmi"; + }; + sata: sata@220000 { compatible = "fsl,pq-sata-v2"; reg = <0x220000 0x1000>; -- 2.7.4

2 19

[U-Boot] [PATCH v3] ppc/km: enable DM driver support in all defconfigs
by Holger Brunck 24 Dec '19

24 Dec '19

This is the first step to use DM support for the KM powerpc boards. Signed-off-by: Holger Brunck <holger.brunck(a)ch.abb.com> CC: Mario Six <mario.six(a)gdsys.cc> CC: Wolfgang Denk <wd(a)denx.de> CC: Valentin Longchamp <valentin.longchamp(a)ch.abb.com> CC: Priyanka Jain <priyanka.jain(a)nxp.com> --- Changes for v3: - rebase on latest master Changes for v2: - fix typo in e-mail address configs/kmcoge4_defconfig | 2 ++ configs/kmcoge5ne_defconfig | 2 ++ configs/kmeter1_defconfig | 2 ++ configs/kmopti2_defconfig | 2 ++ configs/kmsupx5_defconfig | 2 ++ configs/kmtegr1_defconfig | 2 ++ configs/kmtepr2_defconfig | 2 ++ configs/suvd3_defconfig | 2 ++ configs/tuge1_defconfig | 2 ++ configs/tuxx1_defconfig | 2 ++ 10 files changed, 20 insertions(+) diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index ad2de2cd62..1635a51e7c 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_MPC85xx=y CONFIG_TARGET_KMP204X=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -42,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_OFFSET_REDUND=0x110000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 0d41396c25..472dc88fbf 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -154,6 +154,7 @@ CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_DBYP_PLL_BYPASSED=y CONFIG_LCRR_EADC_2=y CONFIG_LCRR_CLKDIV_4=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -182,6 +183,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 4d9f412020..02b17ed624 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -118,6 +118,7 @@ CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_DBYP_PLL_BYPASSED=y CONFIG_LCRR_EADC_2=y CONFIG_LCRR_CLKDIV_4=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -145,6 +146,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index 80af105584..21af286a85 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -138,6 +138,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -165,6 +166,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 4e58aed96a..8eb6a7c38d 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -118,6 +118,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -145,6 +146,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 9cf0cde923..27a58833f8 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -116,6 +116,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1" @@ -146,6 +147,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF0100000 CONFIG_ENV_ADDR_REDUND=0xF0120000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index d84da2d34b..4195576146 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -138,6 +138,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -165,6 +166,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index 659baa2bef..dd57e319d0 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -138,6 +138,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SUVD3" @@ -166,6 +167,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index b8df1f57f8..1ee88e256b 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -118,6 +118,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -145,6 +146,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index 562dcbd1ed..69ceb32fa4 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -140,6 +140,7 @@ CONFIG_ACR_APARK_MASTER=y CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +# CONFIG_SYS_MALLOC_F is not set CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_MISC_INIT_R=y @@ -167,6 +168,7 @@ CONFIG_CMD_UBI=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR=0xF00C0000 CONFIG_ENV_ADDR_REDUND=0xF00E0000 +CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 # CONFIG_MMC is not set -- 2.24.0.rc1

2 1

[U-Boot] [PATCH 1/4] ppc/km/tegr1: support second localbus clock signal
by Holger Brunck 24 Dec '19

24 Dec '19

On kmtegr1 we have to specify the second localbus clock signal also instead of using the default for our ppc 8309 boards. Signed-off-by: Holger Brunck <holger.brunck(a)ch.abb.com> CC: Priyanka Jain <priyanka.jain(a)nxp.com> CC: Valentin Longchamp <valentin.longchamp(a)ch.abb.com> --- include/configs/km/km-mpc8309.h | 2 ++ include/configs/kmtegr1.h | 17 +++++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index 9aaea273e0..e710c04493 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -22,6 +22,7 @@ * System IO Config */ /* 0x14000180 SICR_1 */ +#ifndef CONFIG_SYS_SICRL #define CONFIG_SYS_SICRL (0 \ | SICR_1_UART1_UART1RTS \ | SICR_1_I2C_CKSTOP \ @@ -38,6 +39,7 @@ | SICR_1_FEC1_FEC1 \ | SICR_1_FEC2_FEC2 \ ) +#endif /* 0x00080400 SICR_2 */ #define CONFIG_SYS_SICRH (0 \ diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index e627606222..a441fca121 100644 --- a/include/configs/kmtegr1.h +++ b/include/configs/kmtegr1.h @@ -30,6 +30,23 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_SICRL (0 \ + | SICR_1_UART1_UART1RTS \ + | SICR_1_I2C_CKSTOP \ + | SICR_1_IRQ_A_IRQ \ + | SICR_1_IRQ_B_IRQ \ + | SICR_1_GPIO_A_GPIO \ + | SICR_1_GPIO_B_GPIO \ + | SICR_1_GPIO_C_GPIO \ + | SICR_1_GPIO_D_GPIO \ + | SICR_1_GPIO_E_LCS \ + | SICR_1_GPIO_F_GPIO \ + | SICR_1_USB_A_UART2S \ + | SICR_1_USB_B_UART2RTS \ + | SICR_1_FEC1_FEC1 \ + | SICR_1_FEC2_FEC2 \ + ) + /* include common defines/options for all Keymile boards */ #include "km/keymile-common.h" #include "km/km-powerpc.h" -- 2.24.0.rc1

2 4

[PATCH v2 0/2] reset/usb: Add reset status
by Ley Foon Tan 24 Dec '19

24 Dec '19

In Cyclone 5 SoC platform, the first USB probing is failed but second probing is success. DWC2 driver read gsnpsid register right after de-assert reset, but controller is not ready yet and it returns gsnpsid 0. Polling reset status after de-assert reset to solve the issue. This patchset also add .rst_status callback function to reset-socfpga driver to support this get reset status feature. v1->v2: - Change from constant delay to poll for reset status; - Add reset status callback function. History: v1: https://patchwork.ozlabs.org/patch/1214841/ Ley Foon Tan (2): reset: socfpga: Add reset status callback function usb: dwc2: Add polling for reset status drivers/reset/reset-socfpga.c | 12 ++++++++++++ drivers/usb/host/dwc2.c | 10 +++++++++- 2 files changed, 21 insertions(+), 1 deletion(-) -- 2.19.0

2 4

[PATCH 1/1] part: efi: comment for GPT_HEADER_SIGNATURE_UBOOT
by Heinrich Schuchardt 24 Dec '19

24 Dec '19

Add a comment indicating that the value of GPT_HEADER_SIGNATURE_UBOOT equals the ASCII string 'EFI PART'. Signed-off-by: Heinrich Schuchardt <xypron.glpk(a)gmx.de> --- include/part_efi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/part_efi.h b/include/part_efi.h index eb5797af74..1929e4400f 100644 --- a/include/part_efi.h +++ b/include/part_efi.h @@ -24,7 +24,7 @@ #define EFI_PMBR_OSTYPE_EFI 0xEF #define EFI_PMBR_OSTYPE_EFI_GPT 0xEE -#define GPT_HEADER_SIGNATURE_UBOOT 0x5452415020494645ULL +#define GPT_HEADER_SIGNATURE_UBOOT 0x5452415020494645ULL // 'EFI PART' #define GPT_HEADER_CHROMEOS_IGNORE 0x454d45524f4e4749ULL // 'IGNOREME' #define GPT_HEADER_REVISION_V1 0x00010000 -- 2.24.0

1 0