October 2019 - U-Boot

[U-Boot] [PATCH 1/2] arm64: versal: Enable memory mapping via DT
by Michal Simek 08 Oct '19

08 Oct '19

Code reads DT and setup MMU table based on memory node. This will ensure that only DT needs to be changed. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- arch/arm/mach-versal/cpu.c | 36 +++++++++++++------ arch/arm/mach-versal/include/mach/sys_proto.h | 1 + board/xilinx/versal/board.c | 9 ++++- 3 files changed, 35 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index 70c1908ec4b2..dc6a9205be0e 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -12,14 +12,15 @@ DECLARE_GLOBAL_DATA_PTR; -static struct mm_region versal_mem_map[] = { +#define VERSAL_MEM_MAP_USED 6 + +#define DRAM_BANKS CONFIG_NR_DRAM_BANKS + +/* +1 is end of list which needs to be empty */ +#define VERSAL_MEM_MAP_MAX (VERSAL_MEM_MAP_USED + DRAM_BANKS + 1) + +static struct mm_region versal_mem_map[VERSAL_MEM_MAP_MAX] = { { - .virt = 0x0UL, - .phys = 0x0UL, - .size = 0x80000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { .virt = 0x80000000UL, .phys = 0x80000000UL, .size = 0x70000000UL, @@ -59,12 +60,27 @@ static struct mm_region versal_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN - }, { - /* List terminator */ - 0, } }; +void mem_map_fill(void) +{ + int banks = VERSAL_MEM_MAP_USED; + + for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + /* Zero size means no more DDR that's this is end */ + if (!gd->bd->bi_dram[i].size) + break; + + versal_mem_map[banks].virt = gd->bd->bi_dram[i].start; + versal_mem_map[banks].phys = gd->bd->bi_dram[i].start; + versal_mem_map[banks].size = gd->bd->bi_dram[i].size; + versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE; + banks = banks + 1; + } +} + struct mm_region *mem_map = versal_mem_map; u64 get_page_table_size(void) diff --git a/arch/arm/mach-versal/include/mach/sys_proto.h b/arch/arm/mach-versal/include/mach/sys_proto.h index 1dc7bf665690..05934c28d67f 100644 --- a/arch/arm/mach-versal/include/mach/sys_proto.h +++ b/arch/arm/mach-versal/include/mach/sys_proto.h @@ -9,3 +9,4 @@ enum { }; void tcm_init(u8 mode); +void mem_map_fill(void); diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 2b4edd8738b4..5718e1aa7e47 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -9,6 +9,7 @@ #include <malloc.h> #include <asm/io.h> #include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> #include <dm/device.h> #include <dm/uclass.h> #include <versalpl.h> @@ -194,7 +195,13 @@ int board_late_init(void) int dram_init_banksize(void) { - fdtdec_setup_memory_banksize(); + int ret; + + ret = fdtdec_setup_memory_banksize(); + if (ret) + return ret; + + mem_map_fill(); return 0; } -- 2.17.1

2 2

[U-Boot] [PATCH 0/2] arm64: Setting up initrd_hi at run time
by Michal Simek 08 Oct '19

08 Oct '19

Hi, we are running one u-boot configurations on various boards with different amount of memory that setting up initrd_high is problematic. There shouldn't be a problem to setup initrd_high at run time based on DDR size detection. The same changes are done for ZynqMP and Versal. Thanks, Michal Siva Durga Prasad Paladugu (1): arm64: versal: Set initrd_high to as high as possible T Karthik Reddy (1): arm64: zynqmp: Set initrd_high to as high as possible arch/arm/Kconfig | 16 ++++++++++++++++ board/xilinx/versal/board.c | 6 ++++++ board/xilinx/zynqmp/zynqmp.c | 6 ++++++ include/configs/xilinx_versal.h | 1 - include/configs/xilinx_zynqmp.h | 1 - 5 files changed, 28 insertions(+), 2 deletions(-) -- 2.17.1

2 3

[U-Boot] [PATCH] arm64: versal: fpga: Add PL bit stream load support
by Michal Simek 08 Oct '19

08 Oct '19

From: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> This patch adds PL bitstream load support for Versal platform. The PL bitstream is loaded by making an SMC to ATF which in turn communicates with platform firmware which configures and loads PL bitstream on to PL. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- board/xilinx/versal/board.c | 10 ++++++++ drivers/fpga/Kconfig | 9 +++++++ drivers/fpga/Makefile | 1 + drivers/fpga/versalpl.c | 51 +++++++++++++++++++++++++++++++++++++ drivers/fpga/xilinx.c | 8 +++++- include/versalpl.h | 20 +++++++++++++++ include/xilinx.h | 2 ++ 7 files changed, 100 insertions(+), 1 deletion(-) create mode 100644 drivers/fpga/versalpl.c create mode 100644 include/versalpl.h diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index b5ddd0c5ad24..a2b00aa0b662 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -11,13 +11,23 @@ #include <asm/arch/hardware.h> #include <dm/device.h> #include <dm/uclass.h> +#include <versalpl.h> DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_FPGA_VERSALPL) +static xilinx_desc versalpl = XILINX_VERSAL_DESC; +#endif + int board_init(void) { printf("EL Level:\tEL%d\n", current_el()); +#if defined(CONFIG_FPGA_VERSALPL) + fpga_init(); + fpga_add(fpga_xilinx, &versalpl); +#endif + return 0; } diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 105a299812f5..fe398a1d4965 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -56,6 +56,15 @@ config FPGA_ZYNQMPPL Enable FPGA driver for loading bitstream in BIT and BIN format on Xilinx Zynq UltraScale+ (ZynqMP) device. +config FPGA_VERSALPL + bool "Enable Xilinx FPGA driver for Versal" + depends on FPGA_XILINX + help + Enable FPGA driver for loading bitstream in PDI format on Xilinx + Versal device. PDI is a new programmable device image format for + Versal. The bitstream will only be generated as PDI for Versal + platform. + config FPGA_SPARTAN3 bool "Enable Spartan3 FPGA driver" depends on FPGA_XILINX diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 5a778c10e801..04e6480f202c 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -6,6 +6,7 @@ obj-y += fpga.o obj-$(CONFIG_FPGA_SPARTAN2) += spartan2.o obj-$(CONFIG_FPGA_SPARTAN3) += spartan3.o +obj-$(CONFIG_FPGA_VERSALPL) += versalpl.o obj-$(CONFIG_FPGA_VIRTEX2) += virtex2.o obj-$(CONFIG_FPGA_ZYNQPL) += zynqpl.o obj-$(CONFIG_FPGA_ZYNQMPPL) += zynqmppl.o diff --git a/drivers/fpga/versalpl.c b/drivers/fpga/versalpl.c new file mode 100644 index 000000000000..69617a9b1d7f --- /dev/null +++ b/drivers/fpga/versalpl.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2019, Xilinx, Inc, + * Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <memalign.h> +#include <versalpl.h> + +static ulong versal_align_dma_buffer(ulong *buf, u32 len) +{ + ulong *new_buf; + + if ((ulong)buf != ALIGN((ulong)buf, ARCH_DMA_MINALIGN)) { + new_buf = (ulong *)ALIGN((ulong)buf, ARCH_DMA_MINALIGN); + memcpy(new_buf, buf, len); + buf = new_buf; + } + + return (ulong)buf; +} + +static int versal_load(xilinx_desc *desc, const void *buf, size_t bsize, + bitstream_type bstype) +{ + ulong bin_buf; + int ret; + u32 buf_lo, buf_hi; + u32 ret_payload[5]; + + bin_buf = versal_align_dma_buffer((ulong *)buf, bsize); + + debug("%s called!\n", __func__); + flush_dcache_range(bin_buf, bin_buf + bsize); + + buf_lo = lower_32_bits(bin_buf); + buf_hi = upper_32_bits(bin_buf); + + ret = versal_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo, + buf_hi, 0, ret_payload); + if (ret) + puts("PL FPGA LOAD fail\n"); + + return ret; +} + +struct xilinx_fpga_op versal_op = { + .load = versal_load, +}; diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index f5135504eeb6..4b0334b6beb6 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -226,7 +226,10 @@ int xilinx_info(xilinx_desc *desc) case xilinx_zynqmp: printf("ZynqMP PL\n"); break; - /* Add new family types here */ + case xilinx_versal: + printf("Versal PL\n"); + break; + /* Add new family types here */ default: printf ("Unknown family type, %d\n", desc->family); } @@ -257,6 +260,9 @@ int xilinx_info(xilinx_desc *desc) case csu_dma: printf("csu_dma configuration interface (ZynqMP)\n"); break; + case cfi: + printf("CFI configuration interface (Versal)\n"); + break; /* Add new interface types here */ default: printf ("Unsupported interface type, %d\n", desc->iface); diff --git a/include/versalpl.h b/include/versalpl.h new file mode 100644 index 000000000000..b94c82e6e666 --- /dev/null +++ b/include/versalpl.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2019 Xilinx, Inc, + * Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> + */ + +#ifndef _VERSALPL_H_ +#define _VERSALPL_H_ + +#include <xilinx.h> + +#define VERSAL_PM_LOAD_PDI 0x701 +#define VERSAL_PM_PDI_TYPE 0xF + +extern struct xilinx_fpga_op versal_op; + +#define XILINX_VERSAL_DESC \ +{ xilinx_versal, csu_dma, 1, &versal_op, 0, &versal_op } + +#endif /* _VERSALPL_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index af40befa52de..ab4537becfad 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -21,6 +21,7 @@ typedef enum { /* typedef xilinx_iface */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ csu_dma, /* csu_dma interface (zynqmp) */ + cfi, /* CFI interface(versal) */ max_xilinx_iface_type /* insert all new types before this */ } xilinx_iface; /* end, typedef xilinx_iface */ @@ -32,6 +33,7 @@ typedef enum { /* typedef xilinx_family */ xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ xilinx_zynqmp, /* ZynqMP Family */ + xilinx_versal, /* Versal Family */ max_xilinx_type /* insert all new types before this */ } xilinx_family; /* end, typedef xilinx_family */ -- 2.17.1

2 1

[U-Boot] [PATCH v2] arm64: versal: Also record versal name to versal fragment
by Michal Simek 08 Oct '19

08 Oct '19

Just to make sure that also drivers with versal name are assigned to proper fragment. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- Changes in v2: - Avoid reporting myself with any universal platfrom - reported by Heinrich MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 08222fd56948..9b3c46eff0aa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -403,6 +403,7 @@ M: Michal Simek <michal.simek(a)xilinx.com> S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git F: arch/arm/mach-versal/ +N: (?<!uni)versal ARM VERSATILE EXPRESS DRIVERS M: Liviu Dudau <liviu.dudau(a)foss.arm.com> -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: versal: Define board_late_init for versal
by Michal Simek 08 Oct '19

08 Oct '19

From: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> Define board_late_init which performs bootmode detection and prepares corresponding distro boot commaand sequence. Also disable it for mini platforms because simply there is no need to have it enabled. But also disable it for virtual platform because Qemu is not modelling this register space that's why travis testing would fail. This configuration should be reverted when mainline Qemu is updated. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- arch/arm/Kconfig | 1 + arch/arm/mach-versal/include/mach/hardware.h | 23 ++++ board/xilinx/versal/board.c | 111 +++++++++++++++++++ configs/xilinx_versal_mini_emmc0_defconfig | 1 + configs/xilinx_versal_mini_emmc1_defconfig | 1 + configs/xilinx_versal_virt_defconfig | 1 + 6 files changed, 138 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3b0e315061aa..a93138aa0ada 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -980,6 +980,7 @@ config ARCH_VERSAL select DM_MMC if MMC select DM_SERIAL select OF_CONTROL + imply BOARD_LATE_INIT config ARCH_VF610 bool "Freescale Vybrid" diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h index 23fbc3d8f536..e26beab2e9cd 100644 --- a/arch/arm/mach-versal/include/mach/hardware.h +++ b/arch/arm/mach-versal/include/mach/hardware.h @@ -51,3 +51,26 @@ struct rpu_regs { }; #define rpu_base ((struct rpu_regs *)VERSAL_RPU_BASEADDR) + +#define VERSAL_CRP_BASEADDR 0xF1260000 + +struct crp_regs { + u32 reserved0[128]; + u32 boot_mode_usr; +}; + +#define crp_base ((struct crp_regs *)VERSAL_CRP_BASEADDR) + +/* Bootmode setting values */ +#define BOOT_MODES_MASK 0x0000000F +#define QSPI_MODE_24BIT 0x00000001 +#define QSPI_MODE_32BIT 0x00000002 +#define SD_MODE 0x00000003 /* sd 0 */ +#define SD_MODE1 0x00000005 /* sd 1 */ +#define EMMC_MODE 0x00000006 +#define USB_MODE 0x00000007 +#define OSPI_MODE 0x00000008 +#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */ +#define JTAG_MODE 0x00000000 +#define BOOT_MODE_USE_ALT 0x100 +#define BOOT_MODE_ALT_SHIFT 12 diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 90751477b5e1..b5ddd0c5ad24 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -9,6 +9,8 @@ #include <malloc.h> #include <asm/io.h> #include <asm/arch/hardware.h> +#include <dm/device.h> +#include <dm/uclass.h> DECLARE_GLOBAL_DATA_PTR; @@ -65,6 +67,115 @@ int board_early_init_r(void) return 0; } +int board_late_init(void) +{ + u32 reg = 0; + u8 bootmode; + struct udevice *dev; + int bootseq = -1; + int bootseq_len = 0; + int env_targets_len = 0; + const char *mode; + char *new_targets; + char *env_targets; + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + reg = readl(&crp_base->boot_mode_usr); + + if (reg >> BOOT_MODE_ALT_SHIFT) + reg >>= BOOT_MODE_ALT_SHIFT; + + bootmode = reg & BOOT_MODES_MASK; + + puts("Bootmode: "); + switch (bootmode) { + case JTAG_MODE: + puts("JTAG_MODE\n"); + mode = "pxe dhcp"; + break; + case QSPI_MODE_24BIT: + puts("QSPI_MODE_24\n"); + mode = "xspi0"; + break; + case QSPI_MODE_32BIT: + puts("QSPI_MODE_32\n"); + mode = "xspi0"; + break; + case OSPI_MODE: + puts("OSPI_MODE\n"); + mode = "xspi0"; + break; + case EMMC_MODE: + puts("EMMC_MODE\n"); + mode = "mmc0"; + break; + case SD_MODE: + puts("SD_MODE\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "sdhci@f1040000", &dev)) { + puts("Boot from SD0 but without SD0 enabled!\n"); + return -1; + } + debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); + + mode = "mmc"; + bootseq = dev->seq; + break; + case SD1_LSHFT_MODE: + puts("LVL_SHFT_"); + /* fall through */ + case SD_MODE1: + puts("SD_MODE1\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "sdhci@f1050000", &dev)) { + puts("Boot from SD1 but without SD1 enabled!\n"); + return -1; + } + debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); + + mode = "mmc"; + bootseq = dev->seq; + break; + default: + mode = ""; + printf("Invalid Boot Mode:0x%x\n", bootmode); + break; + } + + if (bootseq >= 0) { + bootseq_len = snprintf(NULL, 0, "%i", bootseq); + debug("Bootseq len: %x\n", bootseq_len); + } + + /* + * One terminating char + one byte for space between mode + * and default boot_targets + */ + env_targets = env_get("boot_targets"); + if (env_targets) + env_targets_len = strlen(env_targets); + + new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + + bootseq_len); + if (!new_targets) + return -ENOMEM; + + if (bootseq >= 0) + sprintf(new_targets, "%s%x %s", mode, bootseq, + env_targets ? env_targets : ""); + else + sprintf(new_targets, "%s %s", mode, + env_targets ? env_targets : ""); + + env_set("boot_targets", new_targets); + + return 0; +} + int dram_init_banksize(void) { fdtdec_setup_memory_banksize(); diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index 440035f53bbc..08d23243bee4 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_MALLOC_LEN=0x80000 CONFIG_COUNTER_FREQUENCY=2720000 CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 07ec6ebd664b..fef5cadd6ea7 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_MALLOC_LEN=0x80000 CONFIG_COUNTER_FREQUENCY=2720000 CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 3b07545ac4af..75f8b983080d 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -12,6 +12,7 @@ CONFIG_FIT_VERBOSE=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOOTDELAY=-1 CONFIG_SUPPORT_RAW_INITRD=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: zynqmp: Enable SPI support in SPL for zcu104
by Michal Simek 08 Oct '19

08 Oct '19

It is enabling this mode but full boot is not validated yet. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 1c9a6d6f1ec4..2f269009dfe9 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y @@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: zynqmp: Add u-boot, dm-pre-reloc to clk300 node
by Michal Simek 08 Oct '19

08 Oct '19

This node is used by qspi driver for supporting qspi boot mode in SPL. Similar changes have beeen done by commit a9022b017a90 ("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes") Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- arch/arm/dts/zynqmp-clk.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi index a795efdc15c8..c70f85a43020 100644 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ b/arch/arm/dts/zynqmp-clk.dtsi @@ -38,6 +38,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <300000000>; + u-boot,dm-pre-reloc; }; clk600: clk600 { -- 2.17.1

2 1

[U-Boot] [PATCH] arm64: zynqmp: Enable gpio hog support for zcu102
by Michal Simek 08 Oct '19

08 Oct '19

Gpio hogs are used for GT mux setup after power up. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index 371e6363db2f..52ee2f2a0b04 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index a0fb6c3586cc..2b7cab8add62 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index db7c093d5ebc..ce271b5a31ca 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -58,6 +58,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y -- 2.17.1

2 1

[U-Boot] [PATCH 0/2] xilinx: Add some example scripts for bootmodes
by Michal Simek 08 Oct '19

08 Oct '19

Hi, mostly yocto guys asked us to provide default scripts for supporting distribution boot mode which is done by these 2 patches. Thanks, Michal Siva Durga Prasad Paladugu (2): xilinx: Add qspi boot command script for reference xilinx: Add sd boot command script for reference board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++ 2 files changed, 20 insertions(+) create mode 100644 board/xilinx/bootscripts/qspiboot.cmd create mode 100644 board/xilinx/bootscripts/sdboot.cmd -- 2.17.1

2 4

[U-Boot] [PATCH] arm64: zynqmp: Define default SPL_TEXT_BASE address in Kconfig
by Michal Simek 08 Oct '19

08 Oct '19

Define default address via Kconfig. There is no need to change this address for most of the boards but it is also possible. This one line save a lot of lines in defconfigs that's why make sense to do it. The similar change has been done by commit 9340d8fe8beb ("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig") Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- common/spl/Kconfig | 1 + configs/avnet_ultra96_rev1_defconfig | 1 - configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 - configs/xilinx_zynqmp_mini_emmc0_defconfig | 1 - configs/xilinx_zynqmp_mini_emmc1_defconfig | 1 - configs/xilinx_zynqmp_mini_qspi_defconfig | 1 - configs/xilinx_zynqmp_zc1232_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1254_revA_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 1 - configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 1 - configs/xilinx_zynqmp_zcu100_revC_defconfig | 1 - configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 - configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu104_revC_defconfig | 1 - configs/xilinx_zynqmp_zcu106_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu111_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu1275_revA_defconfig | 1 - configs/xilinx_zynqmp_zcu1275_revB_defconfig | 1 - 23 files changed, 1 insertion(+), 22 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index f467eca2be72..59a7b200891f 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -138,6 +138,7 @@ config SPL_TEXT_BASE default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I default 0x20060 if MACH_SUN50I_H6 default 0x00060 if ARCH_SUNXI + default 0xfffc0000 if ARCH_ZYNQMP default 0x0 help The address in memory that SPL will be running from. diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig index b504332ff006..924153081149 100644 --- a/configs/avnet_ultra96_rev1_defconfig +++ b/configs/avnet_ultra96_rev1_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index b326231b6829..f463318565ff 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTDELAY=0 # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index 0faa3326132d..b4162abdd715 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -12,7 +12,6 @@ CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ZynqMP> " diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index 867d2e5d9cee..76d5aa6c713b 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -12,7 +12,6 @@ CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ZynqMP> " diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index b0bc84d55eca..a20534a488ca 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -14,7 +14,6 @@ CONFIG_ZYNQMP_NO_DDR=y # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig index aa2165f77adb..80a310fb1cee 100644 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig index 1ab0639eb9e2..75ec572827bf 100644 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index 7b1f5e9d0ae3..ce1ea089ce8d 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig index ae2554a8eb74..01c29c0e70a3 100644 --- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig index 559a61e8d020..877f5b230da3 100644 --- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index cc2af6dce0ac..6f14234a590e 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -12,7 +12,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig index bf66171335d2..f1970aadf417 100644 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -12,7 +12,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index 4b3f72da7487..cd7d2f5376d2 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index ef291a7d38ef..371e6363db2f 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index 975e9f5eb13b..a0fb6c3586cc 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 34918aa17196..db7c093d5ebc 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index e4090dc28122..eacf75d9f8e2 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 25a2515d1552..1c9a6d6f1ec4 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 212de924a68a..1b685ca04925 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -15,7 +15,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig index dec894787e21..74106d7ea8fa 100644 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu111_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig index c73a97a050cc..b9110ca3b936 100644 --- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revA_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig index 0d4302ea737c..03372c77e637 100644 --- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revB_defconfig @@ -13,7 +13,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y # CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y -- 2.17.1

3 2