ti_qspi now support dt along with platform data,
respective boards need to switch into dm for the same.
Cc: Tom Rini <trini(a)konsulko.com>
Cc: Vitaly Andrianov <vitalya(a)ti.com>
Cc: Peter Howard <phoward(a)gme.net.au>
Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com>
---
Changes for v2, v3, v4:
- rebased to master
drivers/spi/Kconfig | 12 +-
drivers/spi/ti_qspi.c | 490 +++++++++----------------
include/dm/platform_data/spi_ti_qspi.h | 19 +
3 files changed, 202 insertions(+), 319 deletions(-)
create mode 100644 include/dm/platform_data/spi_ti_qspi.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index cf64bc97c8..d046e919b4 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -215,6 +215,12 @@ config TEGRA210_QSPI
be used to access SPI chips on platforms embedding this
NVIDIA Tegra210 IP core.
+config TI_QSPI
+ bool "TI QSPI driver"
+ help
+ Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+ This driver support spi flash single, quad and memory reads.
+
config XILINX_SPI
bool "Xilinx SPI driver"
help
@@ -293,12 +299,6 @@ config SH_QSPI
Enable the Renesas Quad SPI controller driver. This driver can be
used on Renesas SoCs.
-config TI_QSPI
- bool "TI QSPI driver"
- help
- Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
- This driver support spi flash single, quad and memory reads.
-
config KIRKWOOD_SPI
bool "Marvell Kirkwood SPI Driver"
help
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 2dcce66de0..3a2ebe3021 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -19,6 +19,8 @@
#include <regmap.h>
#include <syscon.h>
+#include <dm/platform_data/spi_ti_qspi.h>
+
DECLARE_GLOBAL_DATA_PTR;
/* ti qpsi register bit masks */
@@ -33,17 +35,17 @@ DECLARE_GLOBAL_DATA_PTR;
#define QSPI_CLK_DIV_MAX 0xffff
/* command */
#define QSPI_EN_CS(n) (n << 28)
-#define QSPI_WLEN(n) ((n-1) << 19)
+#define QSPI_WLEN(n) ((n - 1) << 19)
#define QSPI_3_PIN BIT(18)
#define QSPI_RD_SNGL BIT(16)
#define QSPI_WR_SNGL (2 << 16)
#define QSPI_INVAL (4 << 16)
#define QSPI_RD_QUAD (7 << 16)
/* device control */
-#define QSPI_DD(m, n) (m << (3 + n*8))
-#define QSPI_CKPHA(n) (1 << (2 + n*8))
-#define QSPI_CSPOL(n) (1 << (1 + n*8))
-#define QSPI_CKPOL(n) (1 << (n*8))
+#define QSPI_DD(m, n) (m << (3 + n * 8))
+#define QSPI_CKPHA(n) (1 << (2 + n * 8))
+#define QSPI_CSPOL(n) (1 << (1 + n * 8))
+#define QSPI_CKPOL(n) (1 << (n * 8))
/* status */
#define QSPI_WC BIT(1)
#define QSPI_BUSY BIT(0)
@@ -98,13 +100,9 @@ struct ti_qspi_regs {
/* ti qspi priv */
struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
- struct spi_slave slave;
-#else
void *memory_map;
uint max_hz;
u32 num_cs;
-#endif
struct ti_qspi_regs *base;
void *ctrl_mod_mmap;
ulong fclk;
@@ -113,37 +111,113 @@ struct ti_qspi_priv {
u32 dc;
};
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+/* TODO: control from sf layer to here through dm-spi */
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
+void spi_flash_copy_mmap(void *data, void *offset, size_t len)
+{
+ unsigned int addr = (unsigned int)(data);
+ unsigned int edma_slot_num = 1;
+
+ /* Invalidate the area, so no writeback into the RAM races with DMA */
+ invalidate_dcache_range(addr, addr + roundup(len, ARCH_DMA_MINALIGN));
+
+ /* enable edma3 clocks */
+ enable_edma3_clocks();
+
+ /* Call edma3 api to do actual DMA transfer */
+ edma3_transfer(EDMA3_BASE, edma_slot_num, data, offset, len);
+
+ /* disable edma3 clocks */
+ disable_edma3_clocks();
+
+ *((unsigned int *)offset) += len;
+}
+#endif
+
+static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
+{
+ writel(priv->cmd | QSPI_INVAL, &priv->base->cmd);
+ /* dummy readl to ensure bus sync */
+ readl(&priv->base->cmd);
+}
+
+static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
+{
+ u32 val;
+
+ val = readl(ctrl_mod_mmap);
+ if (enable)
+ val |= MEM_CS(cs);
+ else
+ val &= MEM_CS_UNSELECT;
+ writel(val, ctrl_mod_mmap);
+}
+
+static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
+ struct spi_slave *slave,
+ bool enable)
+{
+ u32 memval;
+ u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
+
+ if (!enable) {
+ writel(0, &priv->base->setup0);
+ return;
+ }
+
+ memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
+
+ switch (mode) {
+ case SPI_RX_QUAD:
+ memval |= QSPI_CMD_READ_QUAD;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ memval |= QSPI_SETUP0_READ_QUAD;
+ slave->mode |= SPI_RX_QUAD;
+ break;
+ case SPI_RX_DUAL:
+ memval |= QSPI_CMD_READ_DUAL;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+ memval |= QSPI_SETUP0_READ_DUAL;
+ break;
+ default:
+ memval |= QSPI_CMD_READ;
+ memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
+ memval |= QSPI_SETUP0_READ_NORMAL;
+ break;
+ }
+
+ writel(memval, &priv->base->setup0);
+}
+
+static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
uint clk_div;
- if (!hz)
+ if (!max_hz)
clk_div = 0;
else
- clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
+ clk_div = DIV_ROUND_UP(priv->fclk, max_hz) - 1;
/* truncate clk_div value to QSPI_CLK_DIV_MAX */
if (clk_div > QSPI_CLK_DIV_MAX)
clk_div = QSPI_CLK_DIV_MAX;
- debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
+ debug("%s: max_hz: %d, clock divider %d\n", __func__, max_hz, clk_div);
/* disable SCLK */
writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
&priv->base->clk_ctrl);
/* enable SCLK and program the clk divider */
writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
-}
-static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
-{
- writel(priv->cmd | QSPI_INVAL, &priv->base->cmd);
- /* dummy readl to ensure bus sync */
- readl(&priv->base->cmd);
+ return 0;
}
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
{
+ struct ti_qspi_priv *priv = dev_get_priv(bus);
+
priv->dc = 0;
if (mode & SPI_CPHA)
priv->dc |= QSPI_CKPHA(0);
@@ -155,57 +229,83 @@ static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
return 0;
}
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
+static int ti_qspi_claim_bus(struct udevice *dev)
{
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (slave_plat->cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
+ }
+
+ __ti_qspi_setup_memorymap(priv, slave, true);
+
writel(priv->dc, &priv->base->dc);
writel(0, &priv->base->cmd);
writel(0, &priv->base->data);
- priv->dc <<= cs * 8;
+ priv->dc <<= slave_plat->cs * 8;
writel(priv->dc, &priv->base->dc);
return 0;
}
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
+static int ti_qspi_release_bus(struct udevice *dev)
{
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
+
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ __ti_qspi_setup_memorymap(priv, slave, false);
+
writel(0, &priv->base->dc);
writel(0, &priv->base->cmd);
writel(0, &priv->base->data);
-}
-
-static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
-{
- u32 val;
- val = readl(ctrl_mod_mmap);
- if (enable)
- val |= MEM_CS(cs);
- else
- val &= MEM_CS_UNSELECT;
- writel(val, ctrl_mod_mmap);
+ return 0;
}
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags,
- u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
{
- uint words = bitlen >> 3; /* fixed 8-bit word length */
const uchar *txp = dout;
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ uint words = bitlen >> 3; /* fixed 8-bit word length */
uchar *rxp = din;
+ struct ti_qspi_priv *priv;
+ struct udevice *bus;
uint status;
int timeout;
+ bus = dev->parent;
+ priv = dev_get_priv(bus);
+
+ if (slave->cs > priv->num_cs) {
+ debug("invalid qspi chip select\n");
+ return -EINVAL;
+ }
+
/* Setup mmap flags */
if (flags & SPI_XFER_MMAP) {
writel(MM_SWITCH, &priv->base->memswitch);
if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave->cs, true);
return 0;
} else if (flags & SPI_XFER_MMAP_END) {
writel(~MM_SWITCH, &priv->base->memswitch);
if (priv->ctrl_mod_mmap)
- ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
+ ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+ slave->cs, false);
return 0;
}
@@ -220,7 +320,7 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
/* Setup command reg */
priv->cmd = 0;
priv->cmd |= QSPI_WLEN(8);
- priv->cmd |= QSPI_EN_CS(cs);
+ priv->cmd |= QSPI_EN_CS(slave->cs);
if (priv->mode & SPI_3WIRE)
priv->cmd |= QSPI_3_PIN;
priv->cmd |= 0xfff;
@@ -281,7 +381,7 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
*rxp++ = readl(&priv->base->data);
xfer_len = 1;
debug("rx done, status %08x, read %02x\n",
- status, *(rxp-1));
+ status, *(rxp - 1));
}
words -= xfer_len;
}
@@ -293,263 +393,40 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
return 0;
}
-/* TODO: control from sf layer to here through dm-spi */
-#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
-void spi_flash_copy_mmap(void *data, void *offset, size_t len)
-{
- unsigned int addr = (unsigned int) (data);
- unsigned int edma_slot_num = 1;
-
- /* Invalidate the area, so no writeback into the RAM races with DMA */
- invalidate_dcache_range(addr, addr + roundup(len, ARCH_DMA_MINALIGN));
-
- /* enable edma3 clocks */
- enable_edma3_clocks();
-
- /* Call edma3 api to do actual DMA transfer */
- edma3_transfer(EDMA3_BASE, edma_slot_num, data, offset, len);
-
- /* disable edma3 clocks */
- disable_edma3_clocks();
-
- *((unsigned int *)offset) += len;
-}
-#endif
-
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
-{
- return container_of(slave, struct ti_qspi_priv, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* CS handled in xfer */
- return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
- /* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
- u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
- struct spi_slave *slave = &priv->slave;
- memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_8_BITS |
- QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS);
- slave->mode |= SPI_RX_QUAD;
-#else
- memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
- QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
- QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
- QSPI_NUM_DUMMY_BITS;
-#endif
-
- writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
- gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
- gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
- priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
- if (!priv) {
- printf("SPI_error: Fail to allocate ti_qspi_priv\n");
- return NULL;
- }
-
- priv->base = (struct ti_qspi_regs *)QSPI_BASE;
- priv->mode = mode;
-#if defined(CONFIG_DRA7XX)
- priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
- priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
- priv->fclk = QSPI_DRA7XX_FCLK;
-#else
- priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
- priv->fclk = QSPI_FCLK;
-#endif
-
- ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
- ti_spi_setup_spi_register(priv);
-#endif
-
- return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
- free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_set_mode(priv, priv->mode);
- return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
- __ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
- debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
- priv->slave.bus, priv->slave.cs, bitlen, flags);
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
-}
-
-#else /* CONFIG_DM_SPI */
-
-static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
- struct spi_slave *slave,
- bool enable)
-{
- u32 memval;
- u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
-
- if (!enable) {
- writel(0, &priv->base->setup0);
- return;
- }
-
- memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
-
- switch (mode) {
- case SPI_RX_QUAD:
- memval |= QSPI_CMD_READ_QUAD;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
- memval |= QSPI_SETUP0_READ_QUAD;
- slave->mode |= SPI_RX_QUAD;
- break;
- case SPI_RX_DUAL:
- memval |= QSPI_CMD_READ_DUAL;
- memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
- memval |= QSPI_SETUP0_READ_DUAL;
- break;
- default:
- memval |= QSPI_CMD_READ;
- memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
- memval |= QSPI_SETUP0_READ_NORMAL;
- break;
- }
-
- writel(memval, &priv->base->setup0);
-}
-
+static const struct dm_spi_ops ti_qspi_ops = {
+ .claim_bus = ti_qspi_claim_bus,
+ .release_bus = ti_qspi_release_bus,
+ .xfer = ti_qspi_xfer,
+ .set_speed = ti_qspi_set_speed,
+ .set_mode = ti_qspi_set_mode,
+};
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+static int ti_qspi_probe(struct udevice *bus)
{
+ struct ti_qspi_platdata *plat = bus->platdata;
struct ti_qspi_priv *priv = dev_get_priv(bus);
- ti_spi_set_speed(priv, max_hz);
+ priv->fclk = plat->fclk;
+ priv->ctrl_mod_mmap = plat->ctrl_mod_mmap;
+ priv->base = plat->base;
+ priv->memory_map = plat->memory_map;
+ priv->max_hz = plat->max_hz;
+ priv->num_cs = plat->num_cs;
return 0;
}
-static int ti_qspi_set_mode(struct udevice *bus, uint mode)
-{
- struct ti_qspi_priv *priv = dev_get_priv(bus);
- return __ti_qspi_set_mode(priv, mode);
-}
-
-static int ti_qspi_claim_bus(struct udevice *dev)
-{
- struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- if (slave_plat->cs > priv->num_cs) {
- debug("invalid qspi chip select\n");
- return -EINVAL;
- }
-
- __ti_qspi_setup_memorymap(priv, slave, true);
-
- return __ti_qspi_claim_bus(priv, slave_plat->cs);
-}
-
-static int ti_qspi_release_bus(struct udevice *dev)
+static int ti_qspi_child_pre_probe(struct udevice *dev)
{
struct spi_slave *slave = dev_get_parent_priv(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- __ti_qspi_setup_memorymap(priv, slave, false);
- __ti_qspi_release_bus(priv);
-
- return 0;
-}
-
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
- struct ti_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- if (slave->cs > priv->num_cs) {
- debug("invalid qspi chip select\n");
- return -EINVAL;
- }
-
- return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
-}
-
-static int ti_qspi_probe(struct udevice *bus)
-{
+ struct udevice *bus = dev_get_parent(dev);
struct ti_qspi_priv *priv = dev_get_priv(bus);
- priv->fclk = dev_get_driver_data(bus);
-
+ slave->memory_map = priv->memory_map;
return 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
static void *map_syscon_chipselects(struct udevice *bus)
{
#if CONFIG_IS_ENABLED(SYSCON)
@@ -575,7 +452,7 @@ static void *map_syscon_chipselects(struct udevice *bus)
cell = fdt_getprop(gd->fdt_blob, dev_of_offset(bus),
"syscon-chipselects", &len);
- if (len < 2*sizeof(fdt32_t)) {
+ if (len < 2 * sizeof(fdt32_t)) {
debug("%s: offset not available\n", __func__);
return NULL;
}
@@ -583,6 +460,7 @@ static void *map_syscon_chipselects(struct udevice *bus)
return fdtdec_get_number(cell + 1, 1) + regmap_get_range(regmap, 0);
#else
fdt_addr_t addr;
+
addr = devfdt_get_addr_index(bus, 2);
return (addr == FDT_ADDR_T_NONE) ? NULL :
map_physmem(addr, 0, MAP_NOCACHE);
@@ -591,61 +469,47 @@ static void *map_syscon_chipselects(struct udevice *bus)
static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
{
- struct ti_qspi_priv *priv = dev_get_priv(bus);
+ struct ti_qspi_platdata *plat = bus->platdata;
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
- priv->base = map_physmem(devfdt_get_addr(bus),
+ plat->fclk = dev_get_driver_data(bus);
+ plat->ctrl_mod_mmap = map_syscon_chipselects(bus);
+ plat->base = map_physmem(devfdt_get_addr(bus),
sizeof(struct ti_qspi_regs), MAP_NOCACHE);
- priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
+ plat->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
MAP_NOCACHE);
- priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
- if (priv->max_hz < 0) {
+ plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
+ if (plat->max_hz < 0) {
debug("Error: Max frequency missing\n");
return -ENODEV;
}
- priv->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
+ plat->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
debug("%s: regs=<0x%x>, max-frequency=%d\n", __func__,
- (int)priv->base, priv->max_hz);
+ (int)plat->base, plat->max_hz);
return 0;
}
-static int ti_qspi_child_pre_probe(struct udevice *dev)
-{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct udevice *bus = dev_get_parent(dev);
- struct ti_qspi_priv *priv = dev_get_priv(bus);
-
- slave->memory_map = priv->memory_map;
- return 0;
-}
-
-static const struct dm_spi_ops ti_qspi_ops = {
- .claim_bus = ti_qspi_claim_bus,
- .release_bus = ti_qspi_release_bus,
- .xfer = ti_qspi_xfer,
- .set_speed = ti_qspi_set_speed,
- .set_mode = ti_qspi_set_mode,
-};
-
static const struct udevice_id ti_qspi_ids[] = {
{ .compatible = "ti,dra7xxx-qspi", .data = QSPI_DRA7XX_FCLK},
{ .compatible = "ti,am4372-qspi", .data = QSPI_FCLK},
{ }
};
+#endif
U_BOOT_DRIVER(ti_qspi) = {
.name = "ti_qspi",
.id = UCLASS_SPI,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
.of_match = ti_qspi_ids,
- .ops = &ti_qspi_ops,
.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ti_qspi_platdata),
+#endif
+ .ops = &ti_qspi_ops,
.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
.probe = ti_qspi_probe,
.child_pre_probe = ti_qspi_child_pre_probe,
};
-#endif /* CONFIG_DM_SPI */
diff --git a/include/dm/platform_data/spi_ti_qspi.h b/include/dm/platform_data/spi_ti_qspi.h
new file mode 100644
index 0000000000..3f5355284e
--- /dev/null
+++ b/include/dm/platform_data/spi_ti_qspi.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2018 Jagan Teki <jagan(a)amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __spi_ti_qspi_h
+#define __spi_ti_qspi_h
+
+struct ti_qspi_platdata {
+ struct ti_qspi_regs *base;
+ void *ctrl_mod_mmap;
+ ulong fclk;
+ void *memory_map;
+ uint max_hz;
+ u32 num_cs;
+};
+
+#endif /* __spi_ti_qspi_h */
--
2.18.0.321.gffc6fa0e3
