July 2018 - U-Boot

[U-Boot] [PATCH v1 0/2] Replace serial setparity by setconfig
by Patrice Chotard 01 Aug '18

01 Aug '18

This series : _ replace setparity ops by more complete setconfig in serial uclass _ replace setparity by setconfig in STM32 serial driver Patrice Chotard (1): serial: stm32: Replace setparity by setconfig Patrick Delaunay (1): dm: serial: Replace setparity by setconfig drivers/serial/serial-uclass.c | 14 ++++++++++++++ drivers/serial/serial_stm32.c | 21 +++++++++++++++------ include/serial.h | 42 +++++++++++++++++++++++++++++++++++++++--- 3 files changed, 68 insertions(+), 9 deletions(-) -- 1.9.1

3 6

[U-Boot] [PATCH] video: kconfig: remove DM_I2C dependency of I2C_EDID
by Luis Araneda 01 Aug '18

01 Aug '18

Drop the DM_I2C dependency, as the library only implements the parsing of EDID data and doesn't depend on any driver One user of this library, the i2c command, implements support for legacy and DM I2C drivers Tested on a Zynq board, whose I2C driver is not ported yet to DM Signed-off-by: Luis Araneda <luaraneda(a)gmail.com> --- drivers/video/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 5ee9032dc9..a2d7e10938 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -410,7 +410,6 @@ config VIDEO_MVEBU config I2C_EDID bool "Enable EDID library" - depends on DM_I2C default n help This enables library for accessing EDID data from an LCD panel. -- 2.18.0

2 2

[U-Boot] [PATCH v5 00/27] SPI-NAND support
by Miquel Raynal 01 Aug '18

01 Aug '18

During the last months, Boris Brezillon shared his work to support serial flashes within Linux. First, he delivered (and merged) a new layer called spi-mem. He also initiated in Linux MTD subsystem the move of all 'raw' NAND related code to a raw/ subdirectory, adding at the same time a NAND core that would be shared with all NAND devices. Then, he contributed a generic SPI-NAND driver, making use of this NAND core, as well as some vendor code to drive a few chips. On top of this work, I added an 'mtd' U-Boot command to handle all sort of MTD devices. This should become the default command instead of having one per flash flavor ('sf', 'nand', 'spi-nand' ?). The series has been tested on an Ocelot board PCB123 (VSC7514), featuring a Macronix SPI NAND chip. TL;DR: the series contains: - A few patches from Linux to resynchronize some areas of the MTD layer. - Various fixes and re-organization of the MTD subsystem. - The introduction of the SPI-mem interface. - The addition of the generic SPI-NAND driver (and its bindings). - Several SPI NAND chip drivers (Macronix, Micron, Winbond). - A new 'mtd' command. - Support for spi-nand devices in mtdparts. To test your SPI-NAND device with U-Boot simply follow these lines: > setenv mtdparts mtdparts=spi-nand0:1m(foo),-(bar) > setenv mtdids spi-nand0=spi-nand0 > mtdparts # show the spi-nand device partitions > ubi part bar # create a static UBI volume in the bar partition Thanks, Miquèl Changes since v4: ----------------- * Added Jagan's Acked-by tags to every patch related to the SPI-mem/SPI-NAND addition. * Rebased on top of master. Changes since v3: ----------------- * Fixed the debug messages in spi-mem to print either Rx or Tx data. * Fixed a Kconfig error that prevented to build mtdparts with plain defconfig. * Fixed a compilation error due to the above error that prevented one file to be compiled. * Adapted the mtd command to probe MTD partitions also. * Declared mtd_probe_devices() in a header so mtdparts or UBI could use it too (to probe all devices and MTD partitions in a clean way). * As I worked on mtdparts, I found annoying and completely useless the fact that we need to prefix the environment variable with "mtdparts=". Canceled this obligation. * Added one patch to allow spi-nand devices to be recognized by mtdparts (this is purely useless but needed to be done in order to use this command). * Removed useless definitions of MTD device types in UBI code. * Wrote a generic mtdparts environment variable parser, used by the mtd command. * Used the mtd_probe_devices() function from get_mtd_info() in cmd/mtdparts.c to be sure the desired partition really does not exist (otherwise it will be probed and then found). Changes since v2: ----------------- * Rebased on u-boot master branch. * Removed extra-parenthesis in "mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing" * s/fiels/files/ in "mtd: move NAND fiels into a raw/ subdirectory" * Do not describe generic SPI device properties in SPI NAND bindings. * Changes in the mtd command: * Printing more information in 'mtd list' (device type, device characteristics) * Switch to do_div() instead of '(u32)value64b % value32b' which only worked because value32b was a power of 2. * Removed erase.chip option. * By default, erase/read/write happen on the full MTD device while a dump will only work on a single page. Changes since v1: ----------------- * Fixed the nand_memorg structure of the MX35LF2GE4AB chip. * Added Reviewed-by tags from Jagan. * Backported and squashed two patches fixing things in the SPI NAND core received on the Linux ML. * Backported more changes in mtdcore.c from Linux. * Added a patch to add a fallback on mtd->_read/_write() in mtdcore.c when mtd->_read/write_oob() is not supported. * Removed the DT changes, useless as the DTs are not available in mainline yet. * Addressed Boris/Stefan comments on the 'mtd' command. * Added support for multi-pages OOB read/write. Boris Brezillon (7): mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing mtd: Add sanity checks in mtd_write/read_oob() mtd: nand: Add core infrastructure to deal with NAND devices mtd: nand: Pass mode information to nand_page_io_req spi: Extend the core to ease integration of SPI memory controllers mtd: spinand: Add initial support for the MX35LF1GE4AB chip dt-bindings: Add bindings for SPI NAND devices Brian Norris (1): mtd: add get/set of_node/flash_node helpers Ezequiel Garcia (1): mtd: Uninline mtd_write_oob and move it to mtdcore.c Frieder Schrempf (1): mtd: spinand: Add initial support for Winbond W25M02GV Miquel Raynal (15): mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing mtd: fix build issue with includes mtd: move definitions to enlarge their range mtd: move all flash categories inside MTD submenu mtd: move NAND files into a raw/ subdirectory mtd: rename nand into rawnand in Kconfig prompt mtd: spinand: Add initial support for the MX35LF2GE4AB chip mtd: declare MTD_PARTITIONS symbol in Kconfig cmd: ubi: delete useless and misleading definitions cmd: mtdparts: accept spi-nand devices cmd: mtdparts: add a generic 'mtdparts' parser cmd: mtdparts: remove useless 'mtdparts=' prefix mtd: uclass: add probe function cmd: mtd: add 'mtd' command cmd: mtdparts: try to probe the MTD devices as a fallback Peter Pan (2): mtd: nand: Add core infrastructure to support SPI NANDs mtd: spinand: Add initial support for Micron MT29F2G01ABAGD cmd/Kconfig | 7 + cmd/Makefile | 1 + cmd/mtd.c | 392 ++++++++ cmd/mtdparts.c | 113 ++- cmd/ubi.c | 5 - doc/device-tree-bindings/mtd/spi-nand.txt | 5 + drivers/mtd/Kconfig | 7 +- drivers/mtd/Makefile | 4 +- drivers/mtd/mtd-uclass.c | 9 + drivers/mtd/mtdcore.c | 106 ++- drivers/mtd/mtdcore.h | 6 - drivers/mtd/mtdpart.c | 6 +- drivers/mtd/nand/Kconfig | 299 +----- drivers/mtd/nand/Makefile | 79 +- drivers/mtd/nand/bbt.c | 132 +++ drivers/mtd/nand/core.c | 243 +++++ drivers/mtd/nand/raw/Kconfig | 297 ++++++ drivers/mtd/nand/raw/Makefile | 77 ++ drivers/mtd/nand/{ => raw}/am335x_spl_bch.c | 0 drivers/mtd/nand/{ => raw}/arasan_nfc.c | 0 drivers/mtd/nand/{ => raw}/atmel_nand.c | 0 drivers/mtd/nand/{ => raw}/atmel_nand_ecc.h | 0 drivers/mtd/nand/{ => raw}/davinci_nand.c | 0 drivers/mtd/nand/{ => raw}/denali.c | 0 drivers/mtd/nand/{ => raw}/denali.h | 0 drivers/mtd/nand/{ => raw}/denali_dt.c | 0 drivers/mtd/nand/{ => raw}/denali_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_elbc_nand.c | 0 drivers/mtd/nand/{ => raw}/fsl_elbc_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_ifc_nand.c | 0 drivers/mtd/nand/{ => raw}/fsl_ifc_spl.c | 0 drivers/mtd/nand/{ => raw}/fsl_upm.c | 0 drivers/mtd/nand/{ => raw}/fsmc_nand.c | 0 drivers/mtd/nand/{ => raw}/kb9202_nand.c | 0 drivers/mtd/nand/{ => raw}/kirkwood_nand.c | 0 drivers/mtd/nand/{ => raw}/kmeter1_nand.c | 0 drivers/mtd/nand/{ => raw}/lpc32xx_nand_mlc.c | 0 drivers/mtd/nand/{ => raw}/lpc32xx_nand_slc.c | 0 drivers/mtd/nand/{ => raw}/mxc_nand.c | 0 drivers/mtd/nand/{ => raw}/mxc_nand.h | 0 drivers/mtd/nand/{ => raw}/mxc_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand.h | 0 drivers/mtd/nand/{ => raw}/mxs_nand_dt.c | 0 drivers/mtd/nand/{ => raw}/mxs_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/nand.c | 0 drivers/mtd/nand/{ => raw}/nand_base.c | 56 -- drivers/mtd/nand/{ => raw}/nand_bbt.c | 0 drivers/mtd/nand/{ => raw}/nand_bch.c | 0 drivers/mtd/nand/{ => raw}/nand_ecc.c | 0 drivers/mtd/nand/{ => raw}/nand_ids.c | 0 drivers/mtd/nand/{ => raw}/nand_plat.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_load.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_loaders.c | 0 drivers/mtd/nand/{ => raw}/nand_spl_simple.c | 0 drivers/mtd/nand/{ => raw}/nand_timings.c | 0 drivers/mtd/nand/{ => raw}/nand_util.c | 0 drivers/mtd/nand/{ => raw}/omap_elm.c | 0 drivers/mtd/nand/{ => raw}/omap_gpmc.c | 0 drivers/mtd/nand/{ => raw}/pxa3xx_nand.c | 0 drivers/mtd/nand/{ => raw}/pxa3xx_nand.h | 0 drivers/mtd/nand/{ => raw}/sunxi_nand.c | 0 drivers/mtd/nand/{ => raw}/sunxi_nand_spl.c | 0 drivers/mtd/nand/{ => raw}/tegra_nand.c | 0 drivers/mtd/nand/{ => raw}/tegra_nand.h | 0 drivers/mtd/nand/{ => raw}/vf610_nfc.c | 0 drivers/mtd/nand/{ => raw}/zynq_nand.c | 0 drivers/mtd/nand/spi/Kconfig | 7 + drivers/mtd/nand/spi/Makefile | 4 + drivers/mtd/nand/spi/core.c | 1254 +++++++++++++++++++++++++ drivers/mtd/nand/spi/macronix.c | 146 +++ drivers/mtd/nand/spi/micron.c | 135 +++ drivers/mtd/nand/spi/winbond.c | 143 +++ drivers/mtd/onenand/onenand_base.c | 60 -- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-mem.c | 500 ++++++++++ include/jffs2/load_kernel.h | 7 +- include/linux/mtd/mtd.h | 34 +- include/linux/mtd/nand.h | 734 +++++++++++++++ include/linux/mtd/partitions.h | 3 + include/linux/mtd/spinand.h | 432 +++++++++ include/spi-mem.h | 258 +++++ include/spi.h | 11 + 84 files changed, 5042 insertions(+), 538 deletions(-) create mode 100644 cmd/mtd.c create mode 100644 doc/device-tree-bindings/mtd/spi-nand.txt create mode 100644 drivers/mtd/nand/bbt.c create mode 100644 drivers/mtd/nand/core.c create mode 100644 drivers/mtd/nand/raw/Kconfig create mode 100644 drivers/mtd/nand/raw/Makefile rename drivers/mtd/nand/{ => raw}/am335x_spl_bch.c (100%) rename drivers/mtd/nand/{ => raw}/arasan_nfc.c (100%) rename drivers/mtd/nand/{ => raw}/atmel_nand.c (100%) rename drivers/mtd/nand/{ => raw}/atmel_nand_ecc.h (100%) rename drivers/mtd/nand/{ => raw}/davinci_nand.c (100%) rename drivers/mtd/nand/{ => raw}/denali.c (100%) rename drivers/mtd/nand/{ => raw}/denali.h (100%) rename drivers/mtd/nand/{ => raw}/denali_dt.c (100%) rename drivers/mtd/nand/{ => raw}/denali_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_elbc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_elbc_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_ifc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_ifc_spl.c (100%) rename drivers/mtd/nand/{ => raw}/fsl_upm.c (100%) rename drivers/mtd/nand/{ => raw}/fsmc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kb9202_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kirkwood_nand.c (100%) rename drivers/mtd/nand/{ => raw}/kmeter1_nand.c (100%) rename drivers/mtd/nand/{ => raw}/lpc32xx_nand_mlc.c (100%) rename drivers/mtd/nand/{ => raw}/lpc32xx_nand_slc.c (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand.c (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand.h (100%) rename drivers/mtd/nand/{ => raw}/mxc_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand.h (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand_dt.c (100%) rename drivers/mtd/nand/{ => raw}/mxs_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/nand.c (100%) rename drivers/mtd/nand/{ => raw}/nand_base.c (98%) rename drivers/mtd/nand/{ => raw}/nand_bbt.c (100%) rename drivers/mtd/nand/{ => raw}/nand_bch.c (100%) rename drivers/mtd/nand/{ => raw}/nand_ecc.c (100%) rename drivers/mtd/nand/{ => raw}/nand_ids.c (100%) rename drivers/mtd/nand/{ => raw}/nand_plat.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_load.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_loaders.c (100%) rename drivers/mtd/nand/{ => raw}/nand_spl_simple.c (100%) rename drivers/mtd/nand/{ => raw}/nand_timings.c (100%) rename drivers/mtd/nand/{ => raw}/nand_util.c (100%) rename drivers/mtd/nand/{ => raw}/omap_elm.c (100%) rename drivers/mtd/nand/{ => raw}/omap_gpmc.c (100%) rename drivers/mtd/nand/{ => raw}/pxa3xx_nand.c (100%) rename drivers/mtd/nand/{ => raw}/pxa3xx_nand.h (100%) rename drivers/mtd/nand/{ => raw}/sunxi_nand.c (100%) rename drivers/mtd/nand/{ => raw}/sunxi_nand_spl.c (100%) rename drivers/mtd/nand/{ => raw}/tegra_nand.c (100%) rename drivers/mtd/nand/{ => raw}/tegra_nand.h (100%) rename drivers/mtd/nand/{ => raw}/vf610_nfc.c (100%) rename drivers/mtd/nand/{ => raw}/zynq_nand.c (100%) create mode 100644 drivers/mtd/nand/spi/Kconfig create mode 100644 drivers/mtd/nand/spi/Makefile create mode 100644 drivers/mtd/nand/spi/core.c create mode 100644 drivers/mtd/nand/spi/macronix.c create mode 100644 drivers/mtd/nand/spi/micron.c create mode 100644 drivers/mtd/nand/spi/winbond.c create mode 100644 drivers/spi/spi-mem.c create mode 100644 include/linux/mtd/nand.h create mode 100644 include/linux/mtd/spinand.h create mode 100644 include/spi-mem.h -- 2.14.1

3 35

[U-Boot] [PATCH v1 0/9] ARM: Odroid XU3: Enable DM_MMC support which is necessary for CONFIG_BLK
by Lukasz Majewski 01 Aug '18

01 Aug '18

This patch series provides following improvements to Odroid XU3: - Fix sdr_timing problem with DW_MMC running with DM - Clean up the defconfig file - Allow default booting via SD card - Fix potential memory leak when running under DM (DW_MMC) Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/408080614 Lukasz Majewski (9): ARM: dw_mmc: Exclude dwmci Exynos priv_data allocation from exynos_dwmci_get_config() ARM: Odroid XU3: config: Disable SDHCI support in the Odroid XU3 ARM: Odroid XU3: Enable driver model support for MMC (DM_MMC) ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0 ARM: Odroid XU3: Adjust BOOT_TARGET_DEVICES to allow booting from SD card (mmc2) ARM: Odroid XU3: MAINTAINERS: Add a co-maintainer for OdroidXU3 ARM: Odroid XU3: Fix the dwmci_exynos *priv data assignment for DM_MMC (sdr_timing) ARM: Odroid XU3: Modify exynos dw_mmc driver to support Odroid XU3 in DM MMC ARM: Odroid XU3: Modify Odroid XU3 config to boot by default from SD card board/samsung/common/bootscripts/autoboot.cmd | 6 ++--- board/samsung/smdk5420/MAINTAINERS | 1 + configs/odroid-xu3_defconfig | 3 +-- drivers/mmc/exynos_dw_mmc.c | 37 +++++++++++++++------------ include/configs/exynos5-common.h | 1 + include/configs/odroid_xu3.h | 7 +++-- 6 files changed, 32 insertions(+), 23 deletions(-) -- 2.11.0

2 24

[U-Boot] [PATCH v6 0/8] NXP LS1046A SMMU enabling patches
by laurentiu.tudor＠nxp.com 01 Aug '18

01 Aug '18

From: Laurentiu Tudor <laurentiu.tudor(a)nxp.com> This patch series adds the required devices setup and device tree fixups for SMMU enablement on NXP LS1046A chips. The approach taken tries to mimic the implementation of PAMU LIODN setup on booke powerpc. First 4 patches contain some fixes and add some missing bits & pieces. Last 4 patches add the actual infrastructure for ICID setup, qman portals, fman ICID and SEC configuration. Changes in v6: - distinct ICIDs for all SEC blocks (Horia, Bharat) Changes in v5: - use distinct ICID for SEC JRs (Horia, Bharat) - moved an #include in the file it's used (Horia) - fix broken compilation of multiple targets due to removal of SEC related config (Horia) - add a missing #include in qds board file - drop few uses of CONFIG_SYS_FMAN_V3 and consistently use CONFIG_SYS_DPAA_FMAN everywhere Changes in v4: - added missing SEC ICID config - updated macro params to match arguments - supplemental comments Changes in v3: - cleaner QMAN_BAR setup - moved SoC specific bits from generic ICID arch setup to board code Changes in v2: - drop CONFIG_SYS_ prefix from newly introduced defines in patch [1/8] Laurentiu Tudor (8): armv8: fsl-layerscape: add missing register blocks base address defines armv8: ls1046a: advertise QMan v3 in configuration misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms armv8: fsl-layerscape: add missing debug stream ID armv8: ls1046a: initial icid setup support armv8: ls1046a: add icid setup for qman portals armv8: ls1046a: setup fman ports ICIDs and device tree armv8: ls1046a: setup SEC ICIDs and fix up device tree arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 + arch/arm/cpu/armv8/fsl-layerscape/icid.c | 192 ++++++++++++++++++ .../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 89 ++++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 3 + .../include/asm/arch-fsl-layerscape/config.h | 1 + .../asm/arch-fsl-layerscape/fsl_icid.h | 115 +++++++++++ .../asm/arch-fsl-layerscape/fsl_portals.h | 24 +++ .../asm/arch-fsl-layerscape/immap_lsch2.h | 15 +- .../asm/arch-fsl-layerscape/stream_id_lsch2.h | 1 + board/freescale/ls1046aqds/ls1046aqds.c | 3 + board/freescale/ls1046ardb/ls1046ardb.c | 3 + drivers/misc/fsl_portals.c | 45 +++- 12 files changed, 480 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/icid.c create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h -- 2.17.1

4 19

[U-Boot] [PATCH 1/2] spi: kirkwood: Get drvdata in .ofdata_to_platdata
by Jagan Teki 01 Aug '18

01 Aug '18

Get the is_errata_50mhz_ac in .ofdata_to_platdata, and reuse it in .set_mode this can eventually initialized dt code at once and adding room to add platdata. Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> --- drivers/spi/kirkwood_spi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 1ad8cdee64..4850a2b955 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -249,6 +249,7 @@ struct mvebu_spi_dev { struct mvebu_spi_platdata { struct kwspi_registers *spireg; + bool is_errata_50mhz_ac; }; struct mvebu_spi_priv { @@ -310,7 +311,6 @@ static int mvebu_spi_set_mode(struct udevice *bus, uint mode) { struct mvebu_spi_platdata *plat = dev_get_platdata(bus); struct kwspi_registers *reg = plat->spireg; - const struct mvebu_spi_dev *drvdata; u32 data = readl(&reg->cfg); data &= ~(KWSPI_CPHA | KWSPI_CPOL | KWSPI_RXLSBF | KWSPI_TXLSBF); @@ -324,8 +324,7 @@ static int mvebu_spi_set_mode(struct udevice *bus, uint mode) writel(data, &reg->cfg); - drvdata = (struct mvebu_spi_dev *)dev_get_driver_data(bus); - if (drvdata->is_errata_50mhz_ac) + if (plat->is_errata_50mhz_ac) mvebu_spi_50mhz_ac_timing_erratum(bus, mode); return 0; @@ -368,8 +367,11 @@ static int mvebu_spi_probe(struct udevice *bus) static int mvebu_spi_ofdata_to_platdata(struct udevice *bus) { struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + const struct mvebu_spi_dev *drvdata = + (struct mvebu_spi_dev *)dev_get_driver_data(bus); plat->spireg = (struct kwspi_registers *)devfdt_get_addr(bus); + plat->is_errata_50mhz_ac = drvdata->is_errata_50mhz_ac; return 0; } -- 2.14.3

7 18

[U-Boot] [PATCH] spi: kirkwood: add orion-spi compatible string
by Chris Packham 01 Aug '18

01 Aug '18

This matches the compatible string used by the Linux kernel. This will allow u-boot to use the same device tree files. Signed-off-by: Chris Packham <judge.packham(a)gmail.com> --- This applies on top of Jagan's series http://patchwork.ozlabs.org/project/uboot/list/?series=33927 drivers/spi/kirkwood_spi.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 036fc36b8329..6a5ab8a1cba4 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -226,6 +226,10 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus) return 0; } +static const struct mvebu_spi_dev orion_spi_dev_data = { + .is_errata_50mhz_ac = false, +}; + static const struct mvebu_spi_dev armada_xp_spi_dev_data = { .is_errata_50mhz_ac = false, }; @@ -239,6 +243,10 @@ static const struct mvebu_spi_dev armada_380_spi_dev_data = { }; static const struct udevice_id mvebu_spi_ids[] = { + { + .compatible = "marvell,orion-spi", + .data = (ulong)&orion_spi_dev_data + }, { .compatible = "marvell,armada-375-spi", .data = (ulong)&armada_375_spi_dev_data -- 2.17.0

4 3

[U-Boot] [PATCH 1/3] armv8: dts: fsl-ls1043a: add sata node support
by peng.ma＠nxp.com 01 Aug '18

01 Aug '18

From: Peng Ma <peng.ma(a)nxp.com> Add sata node to support ls1043a. Signed-off-by: Peng Ma <peng.ma(a)nxp.com> --- arch/arm/dts/fsl-ls1043a-qds.dtsi | 4 ++++ arch/arm/dts/fsl-ls1043a.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+), 0 deletions(-) diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi index addb9ab..3841aee 100644 --- a/arch/arm/dts/fsl-ls1043a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi @@ -174,3 +174,7 @@ &lpuart0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi index a804f51..bb70992 100644 --- a/arch/arm/dts/fsl-ls1043a.dtsi +++ b/arch/arm/dts/fsl-ls1043a.dtsi @@ -287,5 +287,13 @@ ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 4>; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; }; }; -- 1.7.1

3 5

[U-Boot] [PATCH] .travis.yml: Exclude openrd platforms
by Tom Rini 01 Aug '18

01 Aug '18

The openrd platforms are currently orphaned, and are constantly on-edge or overflowing their binary limit. Exclude them from travis for now. Cc: Vagrant Cascadian <vagrant(a)debian.org> Cc: Chris Packham <judge.packham(a)gmail.com> Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.travis.yml b/.travis.yml index 9c53c4fe219d..d5862066570d 100644 --- a/.travis.yml +++ b/.travis.yml @@ -195,7 +195,7 @@ matrix: - BUILDMAN="sandbox x86" TOOLCHAIN="x86_64" - env: - - BUILDMAN="kirkwood" + - BUILDMAN="kirkwood -x openrd" - env: - BUILDMAN="mvebu" - env: -- 2.7.4

1 1

[U-Boot] [PATCH] .travis.yml: Exclude kirkwood machines from the arm926ejs job
by Tom Rini 01 Aug '18

01 Aug '18

We have a specific job for kirkwood platforms so exclude them from this job. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .travis.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.travis.yml b/.travis.yml index 7b0eb6e4f6b5..9c53c4fe219d 100644 --- a/.travis.yml +++ b/.travis.yml @@ -153,7 +153,7 @@ matrix: - BUILDMAN="arm11 arm7 arm920t arm946es" - env: - JOB="arm926ejs" - BUILDMAN="arm926ejs -x mx,siemens,atmel" + BUILDMAN="arm926ejs -x mx,siemens,atmel,kirkwood" - env: - BUILDMAN="atmel" - env: -- 2.7.4

1 1