February 2018 - U-Boot

[U-Boot] [PATCH v2 0/2][for v2018.03] efi_loader: provide new doc/README.efi
by Heinrich Schuchardt 16 Feb '18

16 Feb '18

Provides information about - usage of the bootefi command - overview of UEFI - interaction between U-Boot and EFI drivers --- v2 split the patch in two: one deleteing all old lines, the other adding the new ones update README contents --- Heinrich Schuchardt (2): efi_loader: delete doc/README.efi efi_loader: provide new doc/README.efi doc/README.efi | 353 +++++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 295 insertions(+), 58 deletions(-) -- 2.14.2

1 2

[U-Boot] [PATCH v2 00/13] Convert bootcount drivers to Kconfig
by Alex Kiernan 16 Feb '18

16 Feb '18

This patch set converts bootcount drivers to Kconfig, it also merges CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT. Green Travis build: https://travis-ci.org/akiernan/u-boot/builds/341811354 This patch has been applied on top of u-boot/master: SHA1: 7d531e8a4f9265ade08bc1d35135ff8888381a15 This patch series shall be applied on top of: [U-Boot,1/2] Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig http://patchwork.ozlabs.org/patch/871585/ [U-Boot,2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig http://patchwork.ozlabs.org/patch/871586/ Changes in v2: - Fix erroneously removed line in README - Convert CONFIG_BOOTCOUNT_EXT too - it had only been partially done - Reword CONFIG_BOOTCOUNT_DRAM - Update README for AT91 driver - Remove CONFIG_BOOTCOUNT_LIMIT and CONFIG_SYS_BOOTCOUNT_SINGLEWORD from whitelist - Rename CONFIG_SYS_BOOTCOUNT_ADDR to BOOTCOUNT_ADDR and remove from Kconfig - Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig Alex Kiernan (13): Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT Prepare for multiple bootcount drivers Convert CONFIG_BOOTCOUNT_AM33XX to Kconfig Convert CONFIG_BOOTCOUNT_ENV to Kconfig Convert CONFIG_BOOTCOUNT_RAM to Kconfig Convert CONFIG_BOOTCOUNT_I2C to Kconfig Convert CONFIG_BOOTCOUNT_EXT to Kconfig Integrate AT91 bootcount driver Migrate generic bootcount to Kconfig Remove SYS_BOOTCOUNT_ADDR from Kconfig Rename CONFIG_SYS_BOOTCOUNT_ADDR to BOOTCOUNT_ADDR Migrate CONFIG_BOOTCOUNT_ALEN to Kconfig Remove CONFIG_SYS_BOOTCOUNT_SINGLEWORD README | 32 ----------- configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/ge_b450v3_defconfig | 2 + configs/ge_b650v3_defconfig | 2 + configs/ge_b850v3_defconfig | 2 + configs/ids8313_defconfig | 1 + configs/km_kirkwood_128m16_defconfig | 1 + configs/km_kirkwood_defconfig | 1 + configs/km_kirkwood_pci_defconfig | 1 + configs/kmcoge5un_defconfig | 1 + configs/kmnusa_defconfig | 1 + configs/kmsugp1_defconfig | 1 + configs/kmsuv31_defconfig | 1 + configs/mgcoge3un_defconfig | 1 + configs/mx53ppd_defconfig | 1 - configs/portl2_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/theadorable_debug_defconfig | 1 + configs/thuban_defconfig | 1 + drivers/bootcount/Kconfig | 98 ++++++++++++++++++++++++---------- drivers/bootcount/Makefile | 5 +- drivers/bootcount/bootcount.c | 16 +++--- drivers/bootcount/bootcount_davinci.c | 4 +- drivers/bootcount/bootcount_ext.c | 8 +-- drivers/bootcount/bootcount_i2c.c | 6 +-- include/configs/am335x_evm.h | 1 - include/configs/am335x_sl50.h | 1 - include/configs/baltos.h | 2 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 3 +- include/configs/calimain.h | 2 +- include/configs/chiliboard.h | 1 - include/configs/dh_imx6.h | 2 +- include/configs/ge_bx50v3.h | 6 +-- include/configs/highbank.h | 2 +- include/configs/ids8313.h | 4 +- include/configs/km/km_arm.h | 2 - include/configs/km/kmp204x-common.h | 2 +- include/configs/mx53ppd.h | 2 + include/configs/siemens-am33x-common.h | 2 - include/configs/socfpga_is1.h | 2 +- include/configs/socfpga_sr1500.h | 2 +- include/configs/theadorable.h | 1 - include/configs/ti_am335x_common.h | 2 +- include/configs/tqma6_wru4.h | 2 +- include/configs/x600.h | 2 +- scripts/config_whitelist.txt | 7 --- 50 files changed, 127 insertions(+), 117 deletions(-) -- 2.7.4

2 19

[U-Boot] [RESEND PATCH 0/2] Add clock support for designware net driver
by patrice.chotard＠st.com 16 Feb '18

16 Feb '18

From: Patrice Chotard <patrice.chotard(a)st.com> Resend with Simon Glass as reviewer _ Patch 1 adds dev_count_phandle_with_args() in read.c to avoid compilation errors for Rockchip puma-rk3399 and lion-rk3368 platforms with patch 2. _ Patch 2 adds clock support to designware net driver. Patrice Chotard (2): dm: core: add missing dev_count_phandle_with_args() net: designware: add clock support drivers/core/read.c | 7 +++++++ drivers/net/designware.c | 43 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/designware.h | 4 ++++ 3 files changed, 54 insertions(+) -- 1.9.1

5 13

[U-Boot] [PATCH] arm64: zynqmp: Add support to load an app at EL1
by Michal Simek 16 Feb '18

16 Feb '18

From: Nitin Jain <nitin.jain(a)xilinx.com> This patch is adding support to switch to EL1 while loading an EL1 application with u-boot running at EL above EL1 in aarch64 mode. Signed-off-by: Nitin Jain <nitinj(a)xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- board/xilinx/zynqmp/zynqmp.c | 17 +++++++++++++++++ include/command.h | 2 ++ 2 files changed, 19 insertions(+) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index ff0b3c75f533..b9825ddaa881 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -316,6 +316,23 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) return 0; } +unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, + char * const argv[]) +{ + int ret = 0; + + if (current_el() > 1) { + smp_kick_all_cpus(); + dcache_disable(); + armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry, + ES_TO_AARCH64); + } else { + printf("FAIL: current EL is not above EL1\n"); + ret = EINVAL; + } + return ret; +} + #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) int dram_init_banksize(void) { diff --git a/include/command.h b/include/command.h index 767cabb3df09..56499b8ad5ca 100644 --- a/include/command.h +++ b/include/command.h @@ -111,6 +111,8 @@ extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc, extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); extern int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, + char * const argv[]); /* * Error codes that commands return to cmd_process(). We use the standard 0 * and 1 for success and failure, but add one more case - failure with a -- 1.9.1

1 0

[U-Boot] [PATCH 1/8] Merge CONFIG_BOOTCOUNT and CONFIG_BOOTCOUNT_LIMIT
by Alex Kiernan 16 Feb '18

16 Feb '18

CONFIG_BOOTCOUNT was only used in mx53ppd, merge it with CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Alex Kiernan <alex.kiernan(a)gmail.com> --- configs/mx53ppd_defconfig | 1 - drivers/bootcount/Kconfig | 9 +-------- 2 files changed, 1 insertion(+), 9 deletions(-) diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index b83cf72..d6a1c6a 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -20,7 +20,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y -CONFIG_BOOTCOUNT=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_EXT=y CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5" diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index d82289f..da2ccab 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -4,13 +4,6 @@ menu "Boot count support" -config BOOTCOUNT - bool "Enable Boot count support" - help - Enable boot count support, which provides the ability to store the - number of times the board has booted on a number of different - persistent storage mediums. - config BOOTCOUNT_LIMIT bool "Enable support for checking boot count limit" help @@ -23,7 +16,7 @@ config SYS_BOOTCOUNT_SINGLEWORD This option enables packing boot count magic value and boot count into single word (32 bits). -if BOOTCOUNT +if BOOTCOUNT_LIMIT config BOOTCOUNT_EXT bool "Boot counter on EXT filesystem" -- 2.7.4

4 3

Re: [U-Boot] [PATCH] serial: Make full device search optional
by Derald Woods 15 Feb '18

15 Feb '18

On Feb 15, 2018 9:00 AM, "Alexander Graf" <agraf(a)suse.de> wrote: On 13.02.18 01:00, Derald Woods wrote: > On Mon, Feb 5, 2018 at 7:13 AM, Derald Woods <woods.technical(a)gmail.com > <mailto:woods.technical@gmail.com>> wrote: > > On Mon, Feb 5, 2018 at 3:42 AM, Alexander Graf <agraf(a)suse.de > <mailto:agraf@suse.de>>wrote: > > > > On 05.02.18 01:39, Derald Woods wrote: > > On Tue, Jan 30, 2018 at 7:34 AM, Alexander Graf <agraf(a)suse.de <mailto:agraf@suse.de> > > <mailto:agraf@suse.de <mailto:agraf@suse.de>>> wrote: > > > > On 01/30/2018 02:09 PM, Derald Woods wrote: > > > > On Jan 30, 2018 3:17 AM, "Alexander Graf" <agraf(a)suse.de <mailto:agraf@suse.de> > > <mailto:agraf@suse.de <mailto:agraf@suse.de>> > <mailto:agraf@suse.de <mailto:agraf@suse.de> > > <mailto:agraf@suse.de <mailto:agraf@suse.de>>>> wrote: > > > > On 01/30/2018 12:41 AM, Derald D. Woods wrote: > > > > On Mon, Jan 29, 2018 at 07:46:09AM -0600, Derald Woods > > wrote: > > > > On Jan 29, 2018 6:57 AM, "Alexander Graf" > > <agraf(a)suse.de <mailto:agraf@suse.de> <mailto: agraf(a)suse.de > <mailto:agraf@suse.de>> > > <mailto:agraf@suse.de <mailto:agraf@suse.de> <mailto:agraf@suse.de > <mailto:agraf@suse.de>>>> wrote: > > > > Commit 608b0c4ad4e5ec0c ("serial: Use next serial device > > if probing fails") > > added code to search for more serial devices if the > > default one was not > > probed correctly. > > > > Unfortunately, that breaks omap3_evm. So while > > investigating why that is > > the case, let's disable the full search for everyone but > > bcm283x where it > > is needed. > > > > Fixes: 608b0c4ad4e5ec0c ("serial: Use next serial device > > if probing fails") > > Reported-by: Derald D. Woods > > <woods.technical(a)gmail.com <mailto: woods.technical(a)gmail.com> > <mailto:woods.technical@gmail.com > <mailto:woods.technical@gmail.com>> > > <mailto:woods.technical@gmail.com > <mailto:woods.technical@gmail.com> > > <mailto:woods.technical@gmail.com <mailto: woods.technical(a)gmail.com>>>> > > Signed-off-by: Alexander Graf <agraf(a)suse.de <mailto:agraf@suse.de> > > <mailto:agraf@suse.de <mailto:agraf@suse.de>> > > <mailto:agraf@suse.de > <mailto:agraf@suse.de> <mailto:agraf@suse.de > <mailto:agraf@suse.de>>>> > > > > --- > > > > Derald, could you please test this patch > and verify it > > does indeed unbreak > > omap3_evm? > > > > The omap3_evm boots now with this patch applied on > > master. If > > I enable > > SERIAL_SEARCH_ALL, it does not boot. I always > build cleanly > > using the > > default config only. On failure, there is no > console > > input/output and > > the board unresponsive. > > > > > > So SPL is already broken? Can you try a known > working SPL with > > SERIAL_SEARCH_ALL=y U-Boot payload on top? Does > that work? > > > > > > I will give that path a try and see what I can > discover. Again, > > it will be later today or tomorrow before I can get to > this. > > This is why I asked what should the board code > actually look > > like. As the omap3_evm is ahead of some other OMAP34XX > boards > > currently, a good working example would be helpful. If > omap3_evm > > becomes the example, let's make it a good one. > > > > > > If you want to make it a good example, don't disable > > CONFIG_EFI_LOADER :). > > > > But really, the only major difference I saw between beagle > and evm > > was the fact that evm used DM in SPL. I patched that up > locally (had > > to remove ext support as the binary became too big > otherwise), but > > that didn't show the issue either. So we'll have to wait > on your test > > s. > > > > > > > > It looks like some compiler issue is causing the problem. I > was using > > GCC 7.2.0. When I go back to GCC 6.4.0 the board boots with > > SERIAL_SEARCH_ALL=y. I also verified this by enabling > SPL_DM_SERIAL on > > 'omap3_beagle' and booting with SERIAL_SEARCH_ALL=y. Both GCC > versions > > compiled without error. GCC 6.4.0 is the compiler version that is > > working for me now. The actual offending generated code will > take more > > time, for me, to sort through. > > Can you somehow make it break with omap3_beagle? I have one of > those and > could then help debug. > > > > No. Not with the current default configurations. I have both the > beagleboard(3530) and beagleboard-xM(3730) at home. Their > configuration currently does not enable DM_SERIAL/SPL_DM_SERIAL. I > just recently added OF_CONTROL for them on U-Boot master. The code > path is different for without DM_SERIAL. Enabling DM_SERIAL will aid > in comparison, but will require dropping some config options to make > it fit into SRAM. The '-xM' does not have NAND. On the omap3_evm, I > enable UBI in the default config. So their are at least a couple of > options that would not apply to both beagle variants. There should > probably be a separate default config file for each variant. The > 3530 beagle variant would/should be identical to the omap3_evm. They > are somewhat related from a historical perspective. I will put > together an update to the default configurations this week. Once > that is done, I will be able to make a true comparison. (omap3_evm > has a 3730 variant also) > > Derald > > > > The issue appears to have been related to the use of > CONFIG_SPL_SYS_MALLOC_SIMPLE and CONFIG_SYS_MALLOC_F_LEN in the default > config. The RFC patch series is given below: > > https://lists.denx.de/pipermail/u-boot/2018-February/320152.html > > The BeagleBoard config never attempted to use CONFIG_SPL_SYS_MALLOC_SIMPLE. So you're saying it's probably just running out of memory? Alex The configuration mix was the key difference. The patch series has the details. The default malloc length set by configuration is actually smaller. So there are likely a mix of factors. Derald

2 1

[U-Boot] Please pull ARC changes
by Alexey Brodkin 15 Feb '18

15 Feb '18

Hi Tom, This is just a quite subtle fix that allows to use Elf32 toolchain for building U-Boot so I do believe it qualifies for the next RC and some technical background below. For quite some time we used to use uClibc toolchain for building U-Boot just because it was our default toolchain. But when I tried to use pre-built toolchain from kernel.org for example this one: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gc… I bumped into a trivial problem which is solved now. That said recent kernel.org toolchains could be used for ARC once buildman switches to them. Anyways... The following changes since commit 0c502b6c176281a096a23803e517b19e964485f1: configs: Resync with savedefconfig (2018-02-14 21:34:50 -0500) are available in the Git repository at: git://git.denx.de/u-boot-arc.git for you to fetch changes up to d53b128df40d8b2f5dd87cac194163fca2bc17ed: arc: Fix final linkage with Elf32 tools (2018-02-15 15:44:47 +0300) ---------------------------------------------------------------- Alexey Brodkin (1): arc: Fix final linkage with Elf32 tools arch/arc/config.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -Alexey

2 1

[U-Boot] [PATCH v2] usb: host: xhci-omap: Remove redundant board_usb_init and board_usb_cleanup functions
by Faiz Abbas 15 Feb '18

15 Feb '18

board_usb_init()/_cleanup() should be in board files and don't have a place in the xhci-omap driver. Weak versions for board_usb_init()/_cleanup() already exist in common/usb.c (for host mode) and drivers/usb/gadget/g_dnl.c (for gadget mode). Therefore, remove init and cleanup functions from xhci-omap and implement them in the board files. Signed-off-by: Faiz Abbas <faiz_abbas(a)ti.com> Reviewed-by: Marek Vasut <marex(a)denx.de> Reviewed-by: Bin Meng <bmeng.cn(a)gmail.com> --- v2: Added init and cleanup implementations for boards which were relying on the weak implementation. Uri please test the compulab boards. board/compulab/cl-som-am57x/cl-som-am57x.c | 13 +++++++++++++ board/compulab/cm_t43/cm_t43.c | 14 ++++++++++++++ board/ti/am43xx/board.c | 4 ++-- board/ti/am57xx/board.c | 4 ++-- board/ti/dra7xx/evm.c | 4 ++-- drivers/usb/host/xhci-omap.c | 22 ---------------------- 6 files changed, 33 insertions(+), 28 deletions(-) diff --git a/board/compulab/cl-som-am57x/cl-som-am57x.c b/board/compulab/cl-som-am57x/cl-som-am57x.c index 389eebb..d7dc8a4 100644 --- a/board/compulab/cl-som-am57x/cl-som-am57x.c +++ b/board/compulab/cl-som-am57x/cl-som-am57x.c @@ -16,6 +16,7 @@ #include <asm/arch/sys_proto.h> #include "../common/common.h" #include "../common/eeprom.h" +#include <asm/omap_common.h> DECLARE_GLOBAL_DATA_PTR; @@ -64,3 +65,15 @@ u32 get_board_rev(void) { return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); } + +int board_usb_init(int index, enum usb_init_type init) +{ + enable_usb_clocks(index); + return 0; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + disable_usb_clocks(index); + return 0; +} diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c index 0d5da6f..bdbea4f 100644 --- a/board/compulab/cm_t43/cm_t43.c +++ b/board/compulab/cm_t43/cm_t43.c @@ -14,6 +14,8 @@ #include <power/pmic.h> #include <power/tps65218.h> #include "board.h" +#include <usb.h> +#include <asm/omap_common.h> DECLARE_GLOBAL_DATA_PTR; @@ -50,6 +52,18 @@ int board_init(void) return 0; } +int board_usb_init(int index, enum usb_init_type init) +{ + enable_usb_clocks(index); + return 0; +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + disable_usb_clocks(index); + return 0; +} + #ifdef CONFIG_DRIVER_TI_CPSW static void cpsw_control(int enabled) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 16150ad..715960a 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -687,7 +687,7 @@ int usb_gadget_handle_interrupts(int index) #endif /* CONFIG_USB_DWC3 */ #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -int omap_xhci_board_usb_init(int index, enum usb_init_type init) +int board_usb_init(int index, enum usb_init_type init) { enable_usb_clocks(index); #ifdef CONFIG_USB_DWC3 @@ -718,7 +718,7 @@ int omap_xhci_board_usb_init(int index, enum usb_init_type init) return 0; } -int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init) +int board_usb_cleanup(int index, enum usb_init_type init) { #ifdef CONFIG_USB_DWC3 switch (index) { diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 1128784..c3f60f6 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -867,7 +867,7 @@ int usb_gadget_handle_interrupts(int index) #endif /* CONFIG_USB_DWC3 */ #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -int omap_xhci_board_usb_init(int index, enum usb_init_type init) +int board_usb_init(int index, enum usb_init_type init) { enable_usb_clocks(index); switch (index) { @@ -901,7 +901,7 @@ int omap_xhci_board_usb_init(int index, enum usb_init_type init) return 0; } -int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init) +int board_usb_cleanup(int index, enum usb_init_type init) { #ifdef CONFIG_USB_DWC3 switch (index) { diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 6ecf971..519475e 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -907,7 +907,7 @@ static struct ti_usb_phy_device usb_phy2_device = { .index = 1, }; -int omap_xhci_board_usb_init(int index, enum usb_init_type init) +int board_usb_init(int index, enum usb_init_type init) { enable_usb_clocks(index); switch (index) { @@ -944,7 +944,7 @@ int omap_xhci_board_usb_init(int index, enum usb_init_type init) return 0; } -int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init) +int board_usb_cleanup(int index, enum usb_init_type init) { switch (index) { case 0: diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c index d6c5744..b814500 100644 --- a/drivers/usb/host/xhci-omap.c +++ b/drivers/usb/host/xhci-omap.c @@ -27,28 +27,6 @@ DECLARE_GLOBAL_DATA_PTR; static struct omap_xhci omap; -__weak int omap_xhci_board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - return 0; -} - -int board_usb_init(int index, enum usb_init_type init) -{ - return omap_xhci_board_usb_init(index, init); -} - -__weak int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init) -{ - disable_usb_clocks(index); - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return omap_xhci_board_usb_cleanup(index, init); -} - static int omap_xhci_core_init(struct omap_xhci *omap) { int ret = 0; -- 2.7.4

2 1

[U-Boot] [PATCH] RPi: Add myself as board maintainer
by Alexander Graf 15 Feb '18

15 Feb '18

Commit 958d55f26ce ("MAINTAINERS: Take over BCM2835 maintainership") put me in as maintainer for the RPi soc, but forgot to update the board MAINTIANERS file. Add me there too. Signed-off-by: Alexander Graf <agraf(a)suse.de> --- board/raspberrypi/rpi/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/raspberrypi/rpi/MAINTAINERS b/board/raspberrypi/rpi/MAINTAINERS index a7eb3654bb..cce1a7ad76 100644 --- a/board/raspberrypi/rpi/MAINTAINERS +++ b/board/raspberrypi/rpi/MAINTAINERS @@ -1,6 +1,6 @@ RPI BOARD -#M: Stephen Warren <swarren(a)wwwdotorg.org> -S: Orphaned (Since 2017-07) +M: Alexander Graf <agraf(a)suse.de> +S: Maintained F: board/raspberrypi/rpi/ F: include/configs/rpi.h F: configs/rpi_*defconfig -- 2.12.3

3 4

[U-Boot] [PATCH 2/2] Convert CONFIG_SYS_BOOTCOUNT_SINGLEWORD to Kconfig
by Lukasz Majewski 15 Feb '18

15 Feb '18

This converts the following to Kconfig: CONFIG_SYS_BOOTCOUNT_SINGLEWORD Signed-off-by: Lukasz Majewski <lukma(a)denx.de> --- configs/highbank_defconfig | 1 + drivers/bootcount/Kconfig | 6 ++++++ include/configs/highbank.h | 1 - 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 41f4ef5f78..60a43db197 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -25,6 +25,7 @@ CONFIG_EFI_PARTITION=y CONFIG_ENV_IS_IN_NVRAM=y CONFIG_SCSI_AHCI=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y # CONFIG_MMC is not set CONFIG_SCSI=y CONFIG_OF_LIBFDT=y diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index cb6be73d52..d82289f57b 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -17,6 +17,12 @@ config BOOTCOUNT_LIMIT Enable checking for exceeding the boot count limit. More information: http://www.denx.de/wiki/DULG/UBootBootCountLimit +config SYS_BOOTCOUNT_SINGLEWORD + bool "Use single word to pack boot count and magic value" + help + This option enables packing boot count magic value and boot count + into single word (32 bits). + if BOOTCOUNT config BOOTCOUNT_EXT diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 2831aa3875..6c5d3ae3ac 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -26,7 +26,6 @@ #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } #define CONFIG_CONS_INDEX 0 -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c -- 2.11.0

4 3