August 2017 - U-Boot

[U-Boot] [PATCH][v3] ARMv8/sec_firmware : Update chosen/kaslr-seed with random number
by Ruchika Gupta 03 Aug '17

03 Aug '17

kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node. sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree. Signed-off-by: Ruchika Gupta <ruchika.gupta(a)nxp.com> --- Changes from v2: fix-kaslr-seed moved to sec_firmware.c Changes from v1 - Extra spaces removed from the patch - Support added for LSCH3 devices in the patch - of calls replaced with fdt calls to remove compilation error with latest uboot arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 33 ++++++++++- arch/arm/cpu/armv8/sec_firmware.c | 99 +++++++++++++++++++++++++++++++ arch/arm/include/asm/armv8/sec_firmware.h | 9 +++ 3 files changed, 138 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index f5f4840..7f58dbb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -345,11 +345,36 @@ static void fdt_fixup_msi(void *blob) } #endif +/* Remove JR node used by SEC firmware */ +void fdt_fixup_remove_jr(void *blob) +{ + int jr_node, addr_cells, len; + int crypto_node = fdt_path_offset(blob, "crypto"); + u64 jr_offset, used_jr; + fdt32_t *reg; + + used_jr = sec_firmware_used_jobring_offset(); + fdt_support_default_count_cells(blob, crypto_node, &addr_cells, NULL); + + jr_node = fdt_node_offset_by_compatible(blob, crypto_node, + "fsl,sec-v4.0-job-ring"); + + while (jr_node != -FDT_ERR_NOTFOUND) { + reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len); + jr_offset = fdt_read_number(reg, addr_cells); + if (jr_offset == used_jr) { + fdt_del_node(blob, jr_node); + break; + } + jr_node = fdt_node_offset_by_compatible(blob, jr_node, + "fsl,sec-v4.0-job-ring"); + } +} + void ft_cpu_setup(void *blob, bd_t *bd) { -#ifdef CONFIG_FSL_LSCH2 struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); - unsigned int svr = in_be32(&gur->svr); + unsigned int svr = gur_in32(&gur->svr); /* delete crypto node if not on an E-processor */ if (!IS_E_PROCESSOR(svr)) @@ -358,11 +383,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) else { ccsr_sec_t __iomem *sec; + if (fdt_fixup_kaslr(blob)) + fdt_fixup_remove_jr(blob); + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); } #endif -#endif #ifdef CONFIG_MP ft_fixup_cpu(blob); diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index fffce71..0e74834 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -232,6 +232,59 @@ unsigned int sec_firmware_support_psci_version(void) #endif /* + * Check with sec_firmware if it supports random number generation + * via HW RNG + * + * The return value will be true if it is supported + */ +bool sec_firmware_support_hwrng(void) +{ + uint8_t rand[8]; + if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) { + if (!sec_firmware_get_random(rand, 8)) + return true; + } + + return false; +} + +/* + * sec_firmware_get_random - Get a random number from SEC Firmware + * @rand: random number buffer to be filled + * @bytes: Number of bytes of random number to be supported + * @eret: -1 in case of error, 0 for success + */ +int sec_firmware_get_random(uint8_t *rand, int bytes) +{ + unsigned long long num; + struct pt_regs regs; + int param1; + + if (!bytes || bytes > 8) { + printf("Max Random bytes genration supported is 8\n"); + return -1; + } +#define SIP_RNG_64 0xC200FF11 + regs.regs[0] = SIP_RNG_64; + + if (bytes <= 4) + param1 = 0; + else + param1 = 1; + regs.regs[1] = param1; + + smc_call(&regs); + + if (regs.regs[0]) + return -1; + + num = regs.regs[1]; + memcpy(rand, &num, bytes); + + return 0; +} + +/* * sec_firmware_init - Initialize the SEC Firmware * @sec_firmware_img: the SEC Firmware image address * @eret_hold_l: the address to hold exception return address low @@ -278,3 +331,49 @@ int sec_firmware_init(const void *sec_firmware_img, return 0; } + +/* + * fdt_fix_kaslr - Add kalsr-seed node in Device tree + * @fdt: Device tree + * @eret: 0 in case of error, 1 for success + */ +int fdt_fixup_kaslr(void *fdt) +{ + int nodeoffset; + int err, ret = 0; + u8 rand[8]; + +#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) + /* Check if random seed generation is supported */ + if (sec_firmware_support_hwrng() == false) + return 0; + + ret = sec_firmware_get_random(rand, 8); + if (ret < 0) { + printf("WARNING: No random number to set kaslr-seed\n"); + return 0; + } + + err = fdt_check_header(fdt); + if (err < 0) { + printf("fdt_chosen: %s\n", fdt_strerror(err)); + return 0; + } + + /* find or create "/chosen" node. */ + nodeoffset = fdt_find_or_add_subnode(fdt, 0, "chosen"); + if (nodeoffset < 0) + return 0; + + err = fdt_setprop(fdt, nodeoffset, "kaslr-seed", rand, + sizeof(rand)); + if (err < 0) { + printf("WARNING: can't set kaslr-seed %s.\n", + fdt_strerror(err)); + return 0; + } + ret = 1; +#endif + + return ret; +} diff --git a/arch/arm/include/asm/armv8/sec_firmware.h b/arch/arm/include/asm/armv8/sec_firmware.h index bc1d97d..6d42a71 100644 --- a/arch/arm/include/asm/armv8/sec_firmware.h +++ b/arch/arm/include/asm/armv8/sec_firmware.h @@ -8,10 +8,14 @@ #define __SEC_FIRMWARE_H_ #define PSCI_INVALID_VER 0xffffffff +#define SEC_JR3_OFFSET 0x40000 int sec_firmware_init(const void *, u32 *, u32 *); int _sec_firmware_entry(const void *, u32 *, u32 *); bool sec_firmware_is_valid(const void *); +bool sec_firmware_support_hwrng(void); +int sec_firmware_get_random(uint8_t *rand, int bytes); +int fdt_fixup_kaslr(void *fdt); #ifdef CONFIG_SEC_FIRMWARE_ARMV8_PSCI unsigned int sec_firmware_support_psci_version(void); unsigned int _sec_firmware_support_psci_version(void); @@ -22,4 +26,9 @@ static inline unsigned int sec_firmware_support_psci_version(void) } #endif +static inline unsigned int sec_firmware_used_jobring_offset(void) +{ + return SEC_JR3_OFFSET; +} + #endif /* __SEC_FIRMWARE_H_ */ -- 2.7.4

2 1

[U-Boot] [PATCH] env: add ENV_IS_ANYWHERE
by Rob Clark 03 Aug '17

03 Aug '17

Useful for devices which would otherwise have to use ENV_IS_NOWHERE. Tries to find and load uboot.env from any block device (which may be, for example, hot-pluggable sd-card, SATA or USB disk, so the exact location is not known at the time u-boot is compiled). Signed-off-by: Rob Clark <robdclark(a)gmail.com> --- cmd/bootefi.c | 5 ++ cmd/nvedit.c | 6 +- cmd/usb.c | 4 +- common/Kconfig | 11 ++++ common/Makefile | 1 + common/board_r.c | 11 ++++ common/env_anywhere.c | 156 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/environment.h | 5 ++ 8 files changed, 196 insertions(+), 3 deletions(-) create mode 100644 common/env_anywhere.c diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 765383bc95..80611e1412 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -10,6 +10,7 @@ #include <command.h> #include <dm.h> #include <efi_loader.h> +#include <environment.h> #include <errno.h> #include <libfdt.h> #include <libfdt_env.h> @@ -318,6 +319,10 @@ void efi_set_bootdev(const char *dev, const char *devnr, const char *path) part = parse_partnum(devnr); bootefi_device_path = efi_dp_from_part(desc, part); + +#ifdef CONFIG_ENV_IS_ANYWHERE + env_set_location(desc, part); +#endif } else { #ifdef CONFIG_NET bootefi_device_path = efi_dp_from_eth(); diff --git a/cmd/nvedit.c b/cmd/nvedit.c index cd17db6409..cab7ed2565 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -53,9 +53,11 @@ DECLARE_GLOBAL_DATA_PTR; !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ !defined(CONFIG_ENV_IS_IN_REMOTE) && \ !defined(CONFIG_ENV_IS_IN_UBI) && \ - !defined(CONFIG_ENV_IS_NOWHERE) + !defined(CONFIG_ENV_IS_NOWHERE) && \ + !defined(CONFIG_ENV_IS_ANYWHERE) # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|MMC|FAT|EXT4|\ -NAND|NVRAM|ONENAND|SATA|SPI_FLASH|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE +NAND|NVRAM|ONENAND|SATA|SPI_FLASH|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE or \ +CONFIG_ENV_IS_ANYWHERE #endif /* diff --git a/cmd/usb.c b/cmd/usb.c index 4fa456e318..d3347301ca 100644 --- a/cmd/usb.c +++ b/cmd/usb.c @@ -23,7 +23,7 @@ #include <usb.h> #ifdef CONFIG_USB_STORAGE -static int usb_stor_curr_dev = -1; /* current device */ +int usb_stor_curr_dev = -1; /* current device */ #endif #if defined(CONFIG_USB_HOST_ETHER) && !defined(CONFIG_DM_ETH) static int __maybe_unused usb_ether_curr_dev = -1; /* current ethernet device */ @@ -567,6 +567,7 @@ static void do_usb_start(void) { bootstage_mark_name(BOOTSTAGE_ID_USB_START, "usb_start"); +#ifndef CONFIG_ENV_IS_ANYWHERE if (usb_init() < 0) return; @@ -575,6 +576,7 @@ static void do_usb_start(void) /* try to recognize storage devices immediately */ usb_stor_curr_dev = usb_stor_scan(1); # endif +#endif #ifndef CONFIG_DM_USB # ifdef CONFIG_USB_KEYBOARD drv_usb_kbd_init(); diff --git a/common/Kconfig b/common/Kconfig index 361346b092..e5f8b5ed3f 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -210,6 +210,17 @@ config ENV_IS_NOWHERE Define this if you don't want to or can't have an environment stored on a storage medium +config ENV_IS_ANYWHERE + bool "Environment is on any partition" + depends on BLK + help + Define this if you want to store the environment on the first + partition found containing /uboot.env. Environment will be saved + to same partition it was loaded from. This is suitable for boards + which may be booting from various removable devices (ie. sd-card, + usb-disk, etc) and you don't know at the time u-boot is built what + the boot media will be. + endchoice config ENV_OFFSET diff --git a/common/Makefile b/common/Makefile index 17a92ea2d7..dd5046b78f 100644 --- a/common/Makefile +++ b/common/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o +obj-$(CONFIG_ENV_IS_ANYWHERE) += env_anywhere.o obj-$(CONFIG_CMD_BEDBUG) += bedbug.o obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o diff --git a/common/board_r.c b/common/board_r.c index ecca1edb04..1a47f6cf1f 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -693,6 +693,14 @@ static int run_main_loop(void) return 0; } +#ifdef CONFIG_ENV_IS_ANYWHERE +static int env_relocate_late(void) +{ + env_relocate_spec_late(); + return 0; +} +#endif + /* * Over time we hope to remove these functions with code fragments and * stub funtcions, and instead call the relevant function directly. @@ -898,6 +906,9 @@ static init_fnc_t init_sequence_r[] = { #ifdef CONFIG_PS2KBD initr_kbd, #endif +#ifdef CONFIG_ENV_IS_ANYWHERE + env_relocate_late, +#endif run_main_loop, }; diff --git a/common/env_anywhere.c b/common/env_anywhere.c new file mode 100644 index 0000000000..dc2fc9e522 --- /dev/null +++ b/common/env_anywhere.c @@ -0,0 +1,156 @@ +/* + * Copyright (c) 2017 Rob Clark + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include <command.h> +#include <environment.h> +#include <linux/stddef.h> +#include <malloc.h> +#include <memalign.h> +#include <search.h> +#include <errno.h> +#include <part.h> +#include <blk.h> +#include <usb.h> +#include <dm.h> +#include <fs.h> + +#define ENV_FILE "uboot.env" + +static char env_name[64] = "ANYWHERE"; +char *env_name_spec = env_name; + +extern int usb_stor_curr_dev; + +env_t *env_ptr; + +static struct blk_desc *env_desc; +static int env_part; + +DECLARE_GLOBAL_DATA_PTR; + +int env_init(void) +{ + /* use default */ + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 1; + + return 0; +} + +#ifdef CONFIG_CMD_SAVEENV +int saveenv(void) +{ + env_t env_new; + loff_t size; + int err; + + if (!env_desc) + return 1; + + err = env_export(&env_new); + if (err) + return err; + + fs_set_blk_dev2(env_desc, env_part); + + err = fs_write(ENV_FILE, (ulong)&env_new, 0, sizeof(env_t), &size); + if (err == -1) { + printf("\n** Unable to write \"%s\" to %s **\n", + ENV_FILE, env_name_spec); + return 1; + } + + puts("done\n"); + return 0; +} +#endif /* CONFIG_CMD_SAVEENV */ + +static int env_find(void) +{ + struct udevice *dev; + +#if defined(CONFIG_USB_STORAGE) && defined(CONFIG_DM_USB) && defined(CONFIG_CMD_USB) + int err; + + err = usb_init(); + if (!err) + usb_stor_curr_dev = usb_stor_scan(1); +#endif + + for (uclass_first_device_check(UCLASS_BLK, &dev); + dev; + uclass_next_device_check(&dev)) { + struct blk_desc *desc = dev_get_uclass_platdata(dev); + disk_partition_t info; + int part = 1; + + printf("Scanning disk %s for environment...\n", dev->name); + + /* check all partitions: */ + while (!part_get_info(desc, part, &info)) { + fs_set_blk_dev2(desc, part); + + if (fs_exists(ENV_FILE)) { + printf("Found %s on %s:%d\n", ENV_FILE, + dev->name, part); + + snprintf(env_name, sizeof(env_name), "%s:%d", + dev->name, part); + + env_desc = desc; + env_part = part; + + return 0; + } + + part++; + } + } + + return 1; +} + +void env_set_location(struct blk_desc *desc, int part) +{ + /* if we already have an environment location, keep it: */ + if (env_desc) + return; + + env_desc = desc; + env_part = part; +} + +void env_relocate_spec(void) +{ + set_default_env(NULL); +} + +void env_relocate_spec_late(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); + loff_t size; + int err; + + if (env_find()) + goto err_env_relocate; + + fs_set_blk_dev2(env_desc, env_part); + + err = fs_read(ENV_FILE, (ulong)buf, 0, CONFIG_ENV_SIZE, &size); + if (err == -1) { + printf("\n** Unable to read \"%s\" from %s **\n", + ENV_FILE, env_name_spec); + goto err_env_relocate; + } + + env_import(buf, 1); + return; + +err_env_relocate: + set_default_env("!could not find environment"); +} diff --git a/include/environment.h b/include/environment.h index 6f94986c6b..57f03fe9ad 100644 --- a/include/environment.h +++ b/include/environment.h @@ -177,6 +177,11 @@ extern env_t *env_ptr; extern void env_relocate_spec(void); extern unsigned char env_get_char_spec(int); +#ifdef CONFIG_ENV_IS_ANYWHERE +void env_relocate_spec_late(void); +void env_set_location(struct blk_desc *desc, int part); +#endif + #if defined(CONFIG_NEEDS_MANUAL_RELOC) extern void env_reloc(void); #endif -- 2.13.0

3 8

[U-Boot] [PATCH] misc: Makefile: Add condition on build i2c_eeprom
by Wenyou Yang 03 Aug '17

03 Aug '17

The i2c_eeprom isn't always necessary when building for SPL, add the condition on build i2c_eeprom. Signed-off-by: Wenyou Yang <wenyou.yang(a)microchip.com> --- drivers/misc/Makefile | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 10265c8fb4..ccc84c38fc 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -20,7 +20,13 @@ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o endif obj-$(CONFIG_FSL_IIM) += fsl_iim.o obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o +ifdef CONFIG_SPL_BUILD +ifneq ($(CONFIG_SPL_I2C_SUPPORT),) +obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o +endif +else obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o +endif obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o -- 2.13.0

3 2

[U-Boot] [PATCH] arch/sh: allow building in big-endian mode
by Thomas Petazzoni 03 Aug '17

03 Aug '17

The SuperH architecture allows to be run in either little or big endian mode. Some SuperH SoCs get the little vs. big endian decision through mode pins sampled at reset, so if big endian has been choosen by HW designers, it cannot be easily changed. Therefore, it makes sense to allow building U-Boot for SuperH in big endian mode. To allow this, the only change needed is to adjust the OUTPUT_FORMAT() in the linker script. Signed-off-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> --- arch/sh/cpu/u-boot.lds | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds index bbf9ff4..f185b4d 100644 --- a/arch/sh/cpu/u-boot.lds +++ b/arch/sh/cpu/u-boot.lds @@ -9,7 +9,12 @@ #include "config.h" +#ifdef CONFIG_SYS_BIG_ENDIAN +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-sh-linux") +#else OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#endif + OUTPUT_ARCH(sh) MEMORY -- 2.9.4

2 1

[U-Boot] [PATCH 1/3] net: ravb: Add OF probing support
by Marek Vasut 03 Aug '17

03 Aug '17

Add support for probing the RAVB Ethernet block from device tree. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Joe Hershberger <joe.hershberger(a)ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- drivers/net/ravb.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c index ab45a31d6a..7f0e2568b7 100644 --- a/drivers/net/ravb.c +++ b/drivers/net/ravb.c @@ -589,9 +589,46 @@ static const struct eth_ops ravb_ops = { .write_hwaddr = ravb_write_hwaddr, }; +int ravb_ofdata_to_platdata(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + const char *phy_mode; + const fdt32_t *cell; + int ret = 0; + + pdata->iobase = devfdt_get_addr(dev); + pdata->phy_interface = -1; + phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode", + NULL); + if (phy_mode) + pdata->phy_interface = phy_get_interface_by_name(phy_mode); + if (pdata->phy_interface == -1) { + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); + return -EINVAL; + } + + pdata->max_speed = 1000; + cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL); + if (cell) + pdata->max_speed = fdt32_to_cpu(*cell); + + sprintf(bb_miiphy_buses[0].name, dev->name); + + return ret; +} + +static const struct udevice_id ravb_ids[] = { + { .compatible = "renesas,etheravb-r8a7795" }, + { .compatible = "renesas,etheravb-r8a7796" }, + { .compatible = "renesas,etheravb-rcar-gen3" }, + { } +}; + U_BOOT_DRIVER(eth_ravb) = { .name = "ravb", .id = UCLASS_ETH, + .of_match = ravb_ids, + .ofdata_to_platdata = ravb_ofdata_to_platdata, .probe = ravb_probe, .remove = ravb_remove, .ops = &ravb_ops, -- 2.11.0

3 8

[U-Boot] [PATCH] serial: sh: Use the clock framework to obtain clock config
by Marek Vasut 03 Aug '17

03 Aug '17

Since we now have clock driver on the RCar Gen3 , obtain the clock configuration using the clock framework functions. In case this fails, fall back to the original code for pulling the clock config directly out of OF. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- drivers/serial/serial_sh.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 51f7fbcfb7..087785f9a2 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -9,6 +9,7 @@ #include <common.h> #include <errno.h> +#include <clk.h> #include <dm.h> #include <asm/io.h> #include <asm/processor.h> @@ -214,15 +215,23 @@ static const struct udevice_id sh_serial_id[] ={ static int sh_serial_ofdata_to_platdata(struct udevice *dev) { struct sh_serial_platdata *plat = dev_get_platdata(dev); + struct clk sh_serial_clk; fdt_addr_t addr; + int ret; addr = fdtdec_get_addr(gd->fdt_blob, dev_of_offset(dev), "reg"); if (addr == FDT_ADDR_T_NONE) return -EINVAL; plat->base = addr; - plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "clock", - 1); + + ret = clk_get_by_name(dev, "fck", &sh_serial_clk); + if (!ret) + plat->clk = clk_get_rate(&sh_serial_clk); + else + plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "clock", 1); + plat->type = dev_get_driver_data(dev); return 0; } -- 2.11.0

2 1

[U-Boot] [PATCH] serial: sh: Convert to Kconfig
by Marek Vasut 03 Aug '17

03 Aug '17

Convert the SH Serial to Kconfig using tools/moveconfig.py tool and a bit of manual adjustment to cater for failed conversions. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- configs/MigoR_defconfig | 1 + configs/alt_defconfig | 1 + configs/ap325rxa_defconfig | 1 + configs/ap_sh4a_4a_defconfig | 1 + configs/armadillo-800eva_defconfig | 1 + configs/blanche_defconfig | 1 + configs/ecovec_defconfig | 1 + configs/espt_defconfig | 1 + configs/gose_defconfig | 1 + configs/koelsch_defconfig | 1 + configs/kzm9g_defconfig | 1 + configs/lager_defconfig | 1 + configs/mpr2_defconfig | 1 + configs/ms7720se_defconfig | 1 + configs/ms7722se_defconfig | 1 + configs/ms7750se_defconfig | 1 + configs/porter_defconfig | 1 + configs/r0p7734_defconfig | 1 + configs/r2dplus_defconfig | 1 + configs/r7780mp_defconfig | 1 + configs/r8a7795_salvator-x_defconfig | 1 + configs/r8a7795_ulcb_defconfig | 1 + configs/r8a7796_salvator-x_defconfig | 1 + configs/r8a7796_ulcb_defconfig | 1 + configs/rsk7203_defconfig | 1 + configs/rsk7264_defconfig | 1 + configs/rsk7269_defconfig | 1 + configs/sh7752evb_defconfig | 1 + configs/sh7753evb_defconfig | 1 + configs/sh7757lcr_defconfig | 1 + configs/sh7763rdp_defconfig | 1 + configs/sh7785lcr_32bit_defconfig | 1 + configs/sh7785lcr_defconfig | 1 + configs/shmin_defconfig | 1 + configs/silk_defconfig | 1 + configs/stout_defconfig | 1 + drivers/serial/Kconfig | 8 ++++++++ include/configs/MigoR.h | 1 - include/configs/alt.h | 1 - include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/armadillo-800eva.h | 1 - include/configs/blanche.h | 1 - include/configs/ecovec.h | 1 - include/configs/espt.h | 1 - include/configs/gose.h | 1 - include/configs/koelsch.h | 1 - include/configs/kzm9g.h | 1 - include/configs/lager.h | 1 - include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/porter.h | 1 - include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rsk7203.h | 1 - include/configs/rsk7264.h | 1 - include/configs/rsk7269.h | 1 - include/configs/salvator-x.h | 1 - include/configs/sh7752evb.h | 1 - include/configs/sh7753evb.h | 1 - include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/silk.h | 1 - include/configs/stout.h | 1 - include/configs/ulcb.h | 1 - scripts/config_whitelist.txt | 1 - 71 files changed, 44 insertions(+), 34 deletions(-) diff --git a/configs/MigoR_defconfig b/configs/MigoR_defconfig index f09794e13c..b7ae01c69a 100644 --- a/configs/MigoR_defconfig +++ b/configs/MigoR_defconfig @@ -19,4 +19,5 @@ CONFIG_VERSION_VARIABLE=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/alt_defconfig b/configs/alt_defconfig index 04dda72532..95955d36db 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig index ebefd126a8..394d263d3a 100644 --- a/configs/ap325rxa_defconfig +++ b/configs/ap325rxa_defconfig @@ -23,4 +23,5 @@ CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig index 41c8be9120..ccea9aa80e 100644 --- a/configs/ap_sh4a_4a_defconfig +++ b/configs/ap_sh4a_4a_defconfig @@ -22,4 +22,5 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/armadillo-800eva_defconfig b/configs/armadillo-800eva_defconfig index 4c16ec19fd..ba67d4ddb1 100644 --- a/configs/armadillo-800eva_defconfig +++ b/configs/armadillo-800eva_defconfig @@ -26,4 +26,5 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set # CONFIG_MMC is not set +CONFIG_SCIF_CONSOLE=y CONFIG_OF_LIBFDT=y diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig index bf7700cbe1..d0e12059f5 100644 --- a/configs/blanche_defconfig +++ b/configs/blanche_defconfig @@ -20,3 +20,4 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y diff --git a/configs/ecovec_defconfig b/configs/ecovec_defconfig index cc172f5181..6f818c6d27 100644 --- a/configs/ecovec_defconfig +++ b/configs/ecovec_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/espt_defconfig b/configs/espt_defconfig index a6a7af9755..addc293861 100644 --- a/configs/espt_defconfig +++ b/configs/espt_defconfig @@ -22,4 +22,5 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/gose_defconfig b/configs/gose_defconfig index 5627a18631..40ec59a6c2 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index 465a6be8e7..5592f81370 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index a884e5a10c..80064fccec 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -13,5 +13,6 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y # CONFIG_FAT_WRITE is not set CONFIG_OF_LIBFDT=y diff --git a/configs/lager_defconfig b/configs/lager_defconfig index c2f216bd51..6072990bc4 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/mpr2_defconfig b/configs/mpr2_defconfig index ea33237003..efa0f7fe1c 100644 --- a/configs/mpr2_defconfig +++ b/configs/mpr2_defconfig @@ -23,4 +23,5 @@ CONFIG_VERSION_VARIABLE=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig index 30e52692d0..7f137fa911 100644 --- a/configs/ms7720se_defconfig +++ b/configs/ms7720se_defconfig @@ -27,3 +27,4 @@ CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SCIF_CONSOLE=y diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig index 92f3158dae..db370e2a55 100644 --- a/configs/ms7722se_defconfig +++ b/configs/ms7722se_defconfig @@ -22,4 +22,5 @@ CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7750se_defconfig b/configs/ms7750se_defconfig index 88bbb12003..512341168e 100644 --- a/configs/ms7750se_defconfig +++ b/configs/ms7750se_defconfig @@ -23,4 +23,5 @@ CONFIG_BOOTDELAY=-1 # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/porter_defconfig b/configs/porter_defconfig index a50d9ed99b..42367afaa7 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig index 91b08dc24f..5133a0344e 100644 --- a/configs/r0p7734_defconfig +++ b/configs/r0p7734_defconfig @@ -22,4 +22,5 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index ba68b504d0..4b1b9618b1 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -11,4 +11,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_NETDEVICES=y CONFIG_RTL8139=y CONFIG_PCI=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r7780mp_defconfig b/configs/r7780mp_defconfig index 2a37db824d..02d237aca1 100644 --- a/configs/r7780mp_defconfig +++ b/configs/r7780mp_defconfig @@ -24,4 +24,5 @@ CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r8a7795_salvator-x_defconfig b/configs/r8a7795_salvator-x_defconfig index e50e457b35..74b836e8f9 100644 --- a/configs/r8a7795_salvator-x_defconfig +++ b/configs/r8a7795_salvator-x_defconfig @@ -19,6 +19,7 @@ CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index ebe5cffab8..dfd5be1b35 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -18,6 +18,7 @@ CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig index 062882c667..3358cae66d 100644 --- a/configs/r8a7796_salvator-x_defconfig +++ b/configs/r8a7796_salvator-x_defconfig @@ -20,6 +20,7 @@ CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index d7c4cf3535..b5443c0035 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -19,6 +19,7 @@ CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y CONFIG_DM_ETH=y CONFIG_RENESAS_RAVB=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/rsk7203_defconfig b/configs/rsk7203_defconfig index 1aeb78aad1..f7b99f4842 100644 --- a/configs/rsk7203_defconfig +++ b/configs/rsk7203_defconfig @@ -22,4 +22,5 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7264_defconfig b/configs/rsk7264_defconfig index b07e48c68b..f1999b53e5 100644 --- a/configs/rsk7264_defconfig +++ b/configs/rsk7264_defconfig @@ -3,4 +3,5 @@ CONFIG_TARGET_RSK7264=y CONFIG_BOOTDELAY=3 # CONFIG_CMD_SETEXPR is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7269_defconfig b/configs/rsk7269_defconfig index ed4fe21f94..4a07af6180 100644 --- a/configs/rsk7269_defconfig +++ b/configs/rsk7269_defconfig @@ -3,4 +3,5 @@ CONFIG_TARGET_RSK7269=y CONFIG_BOOTDELAY=3 # CONFIG_CMD_SETEXPR is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7752evb_defconfig b/configs/sh7752evb_defconfig index 4e19243f0d..bafaa4315a 100644 --- a/configs/sh7752evb_defconfig +++ b/configs/sh7752evb_defconfig @@ -31,4 +31,5 @@ CONFIG_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig index 23b7d7df48..1256b5a0ed 100644 --- a/configs/sh7753evb_defconfig +++ b/configs/sh7753evb_defconfig @@ -30,4 +30,5 @@ CONFIG_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig index 44224e1e43..19e6dd6fb1 100644 --- a/configs/sh7757lcr_defconfig +++ b/configs/sh7757lcr_defconfig @@ -30,4 +30,5 @@ CONFIG_DOS_PARTITION=y CONFIG_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7763rdp_defconfig b/configs/sh7763rdp_defconfig index 028616666c..500b17a760 100644 --- a/configs/sh7763rdp_defconfig +++ b/configs/sh7763rdp_defconfig @@ -23,4 +23,5 @@ CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_CMD_JFFS2=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_32bit_defconfig b/configs/sh7785lcr_32bit_defconfig index 8cb58e9d18..8e250ef323 100644 --- a/configs/sh7785lcr_32bit_defconfig +++ b/configs/sh7785lcr_32bit_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_defconfig b/configs/sh7785lcr_defconfig index 5b6ebf8528..2a5f34b1f7 100644 --- a/configs/sh7785lcr_defconfig +++ b/configs/sh7785lcr_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/shmin_defconfig b/configs/shmin_defconfig index dffff1187b..249582f495 100644 --- a/configs/shmin_defconfig +++ b/configs/shmin_defconfig @@ -21,4 +21,5 @@ CONFIG_VERSION_VARIABLE=y CONFIG_CMD_PING=y # CONFIG_CMD_MISC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/silk_defconfig b/configs/silk_defconfig index d161c3bb88..e2d07c2467 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/stout_defconfig b/configs/stout_defconfig index 48989aaea6..e52f9dd6ac 100644 --- a/configs/stout_defconfig +++ b/configs/stout_defconfig @@ -24,6 +24,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_BAUDRATE=38400 +CONFIG_SCIF_CONSOLE=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 97cef7edbd..5883d8fa25 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -454,6 +454,14 @@ config SANDBOX_SERIAL -t raw Raw mode, Ctrl-C is processed by U-Boot -t cooked Cooked mode, Ctrl-C terminates +config SCIF_CONSOLE + bool "Renesas SCIF UART support" + depends on SH || ARCH_RMOBILE + help + Select this to enable Renesas SCIF UART. To operate serial ports + on systems with RCar or SH SoCs, say Y to this option. If unsure, + say N. + config UNIPHIER_SERIAL bool "Support for UniPhier on-chip UART" depends on ARCH_UNIPHIER diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 7217426d3a..d2b8e63fb9 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_SYS_MEMTEST_START (MIGO_R_SDRAM_BASE) diff --git a/include/configs/alt.h b/include/configs/alt.h index 16525087f1..a61814ef00 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -37,7 +37,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* FLASH */ #define CONFIG_SPI diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index b3c22cf4a4..bddbe00795 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -47,7 +47,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 38400 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ #define CONFIG_CONS_SCIF5 1 diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index 440505dd1f..447bf8982a 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_SCIF 1 #define CONFIG_CONS_SCIF4 1 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 2023895c3e..c614cb34d2 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -46,7 +46,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF1 #define SCIF0_BASE 0xe6c40000 #define SCIF1_BASE 0xe6c50000 diff --git a/include/configs/blanche.h b/include/configs/blanche.h index cb80b90381..c8c3151617 100755 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -28,7 +28,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF0 #define CONFIG_SYS_MEMTEST_START (RCAR_GEN2_SDRAM_BASE) diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 2404441860..77f6a29774 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_SCIF 1 #define CONFIG_CONS_SCIF0 1 diff --git a/include/configs/espt.h b/include/configs/espt.h index 845bcc1c9a..e24022aa2b 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -26,7 +26,6 @@ #undef CONFIG_SHOW_BOOT_PROGRESS /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 diff --git a/include/configs/gose.h b/include/configs/gose.h index 8a1d6d3407..067e86d41c 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -38,7 +38,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE 0x20000000 /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* FLASH */ #define CONFIG_SPI diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 2166e2c8f2..988b747cbc 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -38,7 +38,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* FLASH */ #define CONFIG_SPI diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index feb3eec446..df3379d672 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF4 #define CONFIG_SYS_MEMTEST_START (KZM_SDRAM_BASE) diff --git a/include/configs/lager.h b/include/configs/lager.h index bf1352d941..73ea9ac828 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -38,7 +38,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* SPI */ #define CONFIG_SPI diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index df8ffe29d0..b5c8e7206f 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ /* UART */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #endif /* __MPR2_H */ diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 2855c00723..39ea2e8981 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -38,7 +38,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_SYS_MEMTEST_START MS7720SE_SDRAM_BASE diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index de6e58a71e..06ae8fa400 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE) diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 394ce6cd38..fc89546349 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -20,7 +20,6 @@ /* * Command line configuration. */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF1 1 #define CONFIG_BOOTARGS "console=ttySC0,38400" diff --git a/include/configs/porter.h b/include/configs/porter.h index ac21411178..fa1fff9829 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -38,7 +38,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* FLASH */ #define CONFIG_SPI diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 6212dbae21..b9bc188b2f 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_SCIF 1 #define CONFIG_CONS_SCIF3 1 diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 744d567805..ac9482b199 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -15,7 +15,6 @@ #define CONFIG_CMD_SH_ZIMAGEBOOT /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF1 1 #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index bb79a9ffea..895f709741 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -23,7 +23,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PCI -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index 8dc839df96..010b1aac11 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 #define CONFIG_SYS_MEMTEST_START RSK7203_SDRAM_BASE diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index cc709097c0..9e6523b0a5 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -25,7 +25,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ /* Serial */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF3 1 /* Memory */ diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index 12812f9a34..6ca443c469 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -24,7 +24,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Serial */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF7 /* Memory */ diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 0ac3900326..a729b9c880 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -17,7 +17,6 @@ #include "rcar-gen3-common.h" /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF2 #define CONFIG_CONS_INDEX 2 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index 3342a2966c..fcc7cb67f8 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF2 1 #define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE) diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index 78670422f7..dea2822c99 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF2 1 #define CONFIG_SYS_MEMTEST_START (SH7753EVB_SDRAM_BASE) diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index e9cd3d749a..135d3c4e94 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF2 1 #define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE) diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 2186f21f7a..0a06a246d2 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -26,7 +26,6 @@ #undef CONFIG_SHOW_BOOT_PROGRESS /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF2 1 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index ab30428063..e719d7e1c5 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF1 1 #define CONFIG_SCIF_EXT_CLOCK 1 diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 995f76a1ea..bc72233174 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 } /* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 #define CONFIG_CONS_SCIF0 1 /* memory */ diff --git a/include/configs/silk.h b/include/configs/silk.h index 84108fd523..238783b4c4 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -38,7 +38,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE /* FLASH */ #define CONFIG_SPI diff --git a/include/configs/stout.h b/include/configs/stout.h index 16f3ce8647..3b8806d065 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -40,7 +40,6 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_SCIF_A /* SPI */ diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 857fc9f8cf..921b9e5ec6 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -25,7 +25,6 @@ #endif /* SCIF */ -#define CONFIG_SCIF_CONSOLE #define CONFIG_CONS_SCIF2 #define CONFIG_CONS_INDEX 2 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index baf87996a8..8fed0dd042 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2035,7 +2035,6 @@ CONFIG_SBC8641D CONFIG_SCF0403_LCD CONFIG_SCIF CONFIG_SCIF_A -CONFIG_SCIF_CONSOLE CONFIG_SCIF_EXT_CLOCK CONFIG_SCIF_USE_EXT_CLK CONFIG_SCSI_AHCI -- 2.11.0

2 1

[U-Boot] [PATCH 1/3] clk: rmobile: Add RCar Gen3 clock driver
by Marek Vasut 03 Aug '17

03 Aug '17

Add clock driver for the RCar Gen3 R8A7795 and R8A7796 SoCs . This driver allows reading out the clock configuration set by previous boot stages and enabling and disabling clock using the MSTP registers. Setting clock is not supported thus far. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/renesas/Kconfig | 13 + drivers/clk/renesas/Makefile | 1 + drivers/clk/renesas/clk-rcar-gen3.c | 951 ++++++++++++++++++++++++++++++++++++ 5 files changed, 967 insertions(+) create mode 100644 drivers/clk/renesas/Kconfig create mode 100644 drivers/clk/renesas/Makefile create mode 100644 drivers/clk/renesas/clk-rcar-gen3.c diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 44da716b26..60bd706fa2 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -55,5 +55,6 @@ source "drivers/clk/tegra/Kconfig" source "drivers/clk/uniphier/Kconfig" source "drivers/clk/exynos/Kconfig" source "drivers/clk/at91/Kconfig" +source "drivers/clk/renesas/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 2746a8016a..159f285f9a 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_SANDBOX) += clk_sandbox.o obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o obj-$(CONFIG_MACH_PIC32) += clk_pic32.o +obj-$(CONFIG_CLK_RENESAS) += renesas/ obj-$(CONFIG_CLK_ZYNQ) += clk_zynq.o obj-$(CONFIG_CLK_ZYNQMP) += clk_zynqmp.o diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig new file mode 100644 index 0000000000..07640d1ccf --- /dev/null +++ b/drivers/clk/renesas/Kconfig @@ -0,0 +1,13 @@ +config CLK_RENESAS + bool "Renesas clock drivers" + depends on CLK && ARCH_RMOBILE + help + Enable support for clock present on Renesas RCar SoCs. + +config CLK_RCAR_GEN3 + bool "Renesas RCar Gen3 R8A7795/R8A7796 clock driver" + def_bool y if RCAR_GEN3 + depends on CLK_RENESAS + help + Enable this to support the clocks on Renesas RCar Gen3 + R8A7795 and R8A7796 SoC. diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile new file mode 100644 index 0000000000..bd635052be --- /dev/null +++ b/drivers/clk/renesas/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_CLK_RCAR_GEN3) += clk-rcar-gen3.o diff --git a/drivers/clk/renesas/clk-rcar-gen3.c b/drivers/clk/renesas/clk-rcar-gen3.c new file mode 100644 index 0000000000..5ea7d9a1f5 --- /dev/null +++ b/drivers/clk/renesas/clk-rcar-gen3.c @@ -0,0 +1,951 @@ +/* + * Renesas RCar Gen3 R8A7795/R8A7796 CPG MSSR driver + * + * Copyright (C) 2017 Marek Vasut <marek.vasut(a)gmail.com> + * + * Based on the following driver from Linux kernel: + * r8a7796 Clock Pulse Generator / Module Standby and Software Reset + * + * Copyright (C) 2016 Glider bvba + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <wait_bit.h> +#include <asm/io.h> + +#include <dt-bindings/clock/r8a7795-cpg-mssr.h> +#include <dt-bindings/clock/r8a7796-cpg-mssr.h> + +#define CPG_RST_MODEMR 0x0060 + +#define CPG_PLL0CR 0x00d8 +#define CPG_PLL2CR 0x002c +#define CPG_PLL4CR 0x01f4 + +/* + * Module Standby and Software Reset register offets. + * + * If the registers exist, these are valid for SH-Mobile, R-Mobile, + * R-Car Gen2, R-Car Gen3, and RZ/G1. + * These are NOT valid for R-Car Gen1 and RZ/A1! + */ + +/* + * Module Stop Status Register offsets + */ + +static const u16 mstpsr[] = { + 0x030, 0x038, 0x040, 0x048, 0x04C, 0x03C, 0x1C0, 0x1C4, + 0x9A0, 0x9A4, 0x9A8, 0x9AC, +}; + +#define MSTPSR(i) mstpsr[i] + + +/* + * System Module Stop Control Register offsets + */ + +static const u16 smstpcr[] = { + 0x130, 0x134, 0x138, 0x13C, 0x140, 0x144, 0x148, 0x14C, + 0x990, 0x994, 0x998, 0x99C, +}; + +#define SMSTPCR(i) smstpcr[i] + + +/* Realtime Module Stop Control Register offsets */ +#define RMSTPCR(i) (smstpcr[i] - 0x20) + +/* Modem Module Stop Control Register offsets (r8a73a4) */ +#define MMSTPCR(i) (smstpcr[i] + 0x20) + +/* Software Reset Clearing Register offsets */ +#define SRSTCLR(i) (0x940 + (i) * 4) + +struct gen3_clk_priv { + void __iomem *base; + struct clk clk_extal; + struct clk clk_extalr; + const struct rcar_gen3_cpg_pll_config *cpg_pll_config; + const struct mssr_mod_clk *mod_clk; + u32 mod_clk_size; +}; + +/* + * Definitions of CPG Core Clocks + * + * These include: + * - Clock outputs exported to DT + * - External input clocks + * - Internal CPG clocks + */ +struct cpg_core_clk { + /* Common */ + const char *name; + unsigned int id; + unsigned int type; + /* Depending on type */ + unsigned int parent; /* Core Clocks only */ + unsigned int div; + unsigned int mult; + unsigned int offset; +}; + +enum clk_types { + /* Generic */ + CLK_TYPE_IN, /* External Clock Input */ + CLK_TYPE_FF, /* Fixed Factor Clock */ + + /* Custom definitions start here */ + CLK_TYPE_CUSTOM, +}; + +#define DEF_TYPE(_name, _id, _type...) \ + { .name = _name, .id = _id, .type = _type } +#define DEF_BASE(_name, _id, _type, _parent...) \ + DEF_TYPE(_name, _id, _type, .parent = _parent) + +#define DEF_INPUT(_name, _id) \ + DEF_TYPE(_name, _id, CLK_TYPE_IN) +#define DEF_FIXED(_name, _id, _parent, _div, _mult) \ + DEF_BASE(_name, _id, CLK_TYPE_FF, _parent, .div = _div, .mult = _mult) +#define DEF_GEN3_SD(_name, _id, _parent, _offset) \ + DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset) + +/* + * Definitions of Module Clocks + */ +struct mssr_mod_clk { + const char *name; + unsigned int id; + unsigned int parent; /* Add MOD_CLK_BASE for Module Clocks */ +}; + +/* Convert from sparse base-100 to packed index space */ +#define MOD_CLK_PACK(x) ((x) - ((x) / 100) * (100 - 32)) + +#define MOD_CLK_ID(x) (MOD_CLK_BASE + MOD_CLK_PACK(x)) + +#define DEF_MOD(_name, _mod, _parent...) \ + { .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent } + +enum rcar_gen3_clk_types { + CLK_TYPE_GEN3_MAIN = CLK_TYPE_CUSTOM, + CLK_TYPE_GEN3_PLL0, + CLK_TYPE_GEN3_PLL1, + CLK_TYPE_GEN3_PLL2, + CLK_TYPE_GEN3_PLL3, + CLK_TYPE_GEN3_PLL4, + CLK_TYPE_GEN3_SD, + CLK_TYPE_GEN3_R, +}; + +struct rcar_gen3_cpg_pll_config { + unsigned int extal_div; + unsigned int pll1_mult; + unsigned int pll3_mult; +}; + +enum clk_ids { + /* Core Clock Outputs exported to DT */ + LAST_DT_CORE_CLK = R8A7796_CLK_OSC, + + /* External Input Clocks */ + CLK_EXTAL, + CLK_EXTALR, + + /* Internal Core Clocks */ + CLK_MAIN, + CLK_PLL0, + CLK_PLL1, + CLK_PLL2, + CLK_PLL3, + CLK_PLL4, + CLK_PLL1_DIV2, + CLK_PLL1_DIV4, + CLK_S0, + CLK_S1, + CLK_S2, + CLK_S3, + CLK_SDSRC, + CLK_SSPSRC, + CLK_RINT, + + /* Module Clocks */ + MOD_CLK_BASE +}; + +static const struct cpg_core_clk gen3_core_clks[] = { + /* External Clock Inputs */ + DEF_INPUT("extal", CLK_EXTAL), + DEF_INPUT("extalr", CLK_EXTALR), + + /* Internal Core Clocks */ + DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL), + DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN), + DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN), + DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN), + DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN), + DEF_BASE(".pll4", CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN), + + DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1), + DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED(".s0", CLK_S0, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1), + DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), + + /* Core Clock Outputs */ + DEF_FIXED("ztr", R8A7796_CLK_ZTR, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED("ztrd2", R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1), + DEF_FIXED("zt", R8A7796_CLK_ZT, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED("zx", R8A7796_CLK_ZX, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED("s0d1", R8A7796_CLK_S0D1, CLK_S0, 1, 1), + DEF_FIXED("s0d2", R8A7796_CLK_S0D2, CLK_S0, 2, 1), + DEF_FIXED("s0d3", R8A7796_CLK_S0D3, CLK_S0, 3, 1), + DEF_FIXED("s0d4", R8A7796_CLK_S0D4, CLK_S0, 4, 1), + DEF_FIXED("s0d6", R8A7796_CLK_S0D6, CLK_S0, 6, 1), + DEF_FIXED("s0d8", R8A7796_CLK_S0D8, CLK_S0, 8, 1), + DEF_FIXED("s0d12", R8A7796_CLK_S0D12, CLK_S0, 12, 1), + DEF_FIXED("s1d1", R8A7796_CLK_S1D1, CLK_S1, 1, 1), + DEF_FIXED("s1d2", R8A7796_CLK_S1D2, CLK_S1, 2, 1), + DEF_FIXED("s1d4", R8A7796_CLK_S1D4, CLK_S1, 4, 1), + DEF_FIXED("s2d1", R8A7796_CLK_S2D1, CLK_S2, 1, 1), + DEF_FIXED("s2d2", R8A7796_CLK_S2D2, CLK_S2, 2, 1), + DEF_FIXED("s2d4", R8A7796_CLK_S2D4, CLK_S2, 4, 1), + DEF_FIXED("s3d1", R8A7796_CLK_S3D1, CLK_S3, 1, 1), + DEF_FIXED("s3d2", R8A7796_CLK_S3D2, CLK_S3, 2, 1), + DEF_FIXED("s3d4", R8A7796_CLK_S3D4, CLK_S3, 4, 1), + + DEF_GEN3_SD("sd0", R8A7796_CLK_SD0, CLK_SDSRC, 0x074), + DEF_GEN3_SD("sd1", R8A7796_CLK_SD1, CLK_SDSRC, 0x078), + DEF_GEN3_SD("sd2", R8A7796_CLK_SD2, CLK_SDSRC, 0x268), + DEF_GEN3_SD("sd3", R8A7796_CLK_SD3, CLK_SDSRC, 0x26c), + + DEF_FIXED("cl", R8A7796_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cp", R8A7796_CLK_CP, CLK_EXTAL, 2, 1), + + /* NOTE: HDMI, CSI, CAN etc. clock are missing */ + + DEF_BASE("r", R8A7796_CLK_R, CLK_TYPE_GEN3_R, CLK_RINT), +}; + +static const struct mssr_mod_clk r8a7795_mod_clks[] = { + DEF_MOD("fdp1-2", 117, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fdp1-1", 118, R8A7795_CLK_S0D1), + DEF_MOD("fdp1-0", 119, R8A7795_CLK_S0D1), + DEF_MOD("scif5", 202, R8A7795_CLK_S3D4), + DEF_MOD("scif4", 203, R8A7795_CLK_S3D4), + DEF_MOD("scif3", 204, R8A7795_CLK_S3D4), + DEF_MOD("scif1", 206, R8A7795_CLK_S3D4), + DEF_MOD("scif0", 207, R8A7795_CLK_S3D4), + DEF_MOD("msiof3", 208, R8A7795_CLK_MSO), + DEF_MOD("msiof2", 209, R8A7795_CLK_MSO), + DEF_MOD("msiof1", 210, R8A7795_CLK_MSO), + DEF_MOD("msiof0", 211, R8A7795_CLK_MSO), + DEF_MOD("sys-dmac2", 217, R8A7795_CLK_S0D3), + DEF_MOD("sys-dmac1", 218, R8A7795_CLK_S0D3), + DEF_MOD("sys-dmac0", 219, R8A7795_CLK_S0D3), + DEF_MOD("cmt3", 300, R8A7795_CLK_R), + DEF_MOD("cmt2", 301, R8A7795_CLK_R), + DEF_MOD("cmt1", 302, R8A7795_CLK_R), + DEF_MOD("cmt0", 303, R8A7795_CLK_R), + DEF_MOD("scif2", 310, R8A7795_CLK_S3D4), + DEF_MOD("sdif3", 311, R8A7795_CLK_SD3), + DEF_MOD("sdif2", 312, R8A7795_CLK_SD2), + DEF_MOD("sdif1", 313, R8A7795_CLK_SD1), + DEF_MOD("sdif0", 314, R8A7795_CLK_SD0), + DEF_MOD("pcie1", 318, R8A7795_CLK_S3D1), + DEF_MOD("pcie0", 319, R8A7795_CLK_S3D1), + DEF_MOD("usb-dmac30", 326, R8A7795_CLK_S3D1), + DEF_MOD("usb3-if1", 327, R8A7795_CLK_S3D1), /* ES1.x */ + DEF_MOD("usb3-if0", 328, R8A7795_CLK_S3D1), + DEF_MOD("usb-dmac31", 329, R8A7795_CLK_S3D1), + DEF_MOD("usb-dmac0", 330, R8A7795_CLK_S3D1), + DEF_MOD("usb-dmac1", 331, R8A7795_CLK_S3D1), + DEF_MOD("rwdt", 402, R8A7795_CLK_R), + DEF_MOD("intc-ex", 407, R8A7795_CLK_CP), + DEF_MOD("intc-ap", 408, R8A7795_CLK_S3D1), + DEF_MOD("audmac1", 501, R8A7795_CLK_S0D3), + DEF_MOD("audmac0", 502, R8A7795_CLK_S0D3), + DEF_MOD("drif7", 508, R8A7795_CLK_S3D2), + DEF_MOD("drif6", 509, R8A7795_CLK_S3D2), + DEF_MOD("drif5", 510, R8A7795_CLK_S3D2), + DEF_MOD("drif4", 511, R8A7795_CLK_S3D2), + DEF_MOD("drif3", 512, R8A7795_CLK_S3D2), + DEF_MOD("drif2", 513, R8A7795_CLK_S3D2), + DEF_MOD("drif1", 514, R8A7795_CLK_S3D2), + DEF_MOD("drif0", 515, R8A7795_CLK_S3D2), + DEF_MOD("hscif4", 516, R8A7795_CLK_S3D1), + DEF_MOD("hscif3", 517, R8A7795_CLK_S3D1), + DEF_MOD("hscif2", 518, R8A7795_CLK_S3D1), + DEF_MOD("hscif1", 519, R8A7795_CLK_S3D1), + DEF_MOD("hscif0", 520, R8A7795_CLK_S3D1), + DEF_MOD("thermal", 522, R8A7795_CLK_CP), + DEF_MOD("pwm", 523, R8A7795_CLK_S0D12), + DEF_MOD("fcpvd3", 600, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fcpvd2", 601, R8A7795_CLK_S0D2), + DEF_MOD("fcpvd1", 602, R8A7795_CLK_S0D2), + DEF_MOD("fcpvd0", 603, R8A7795_CLK_S0D2), + DEF_MOD("fcpvb1", 606, R8A7795_CLK_S0D1), + DEF_MOD("fcpvb0", 607, R8A7795_CLK_S0D1), + DEF_MOD("fcpvi2", 609, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fcpvi1", 610, R8A7795_CLK_S0D1), + DEF_MOD("fcpvi0", 611, R8A7795_CLK_S0D1), + DEF_MOD("fcpf2", 613, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fcpf1", 614, R8A7795_CLK_S0D1), + DEF_MOD("fcpf0", 615, R8A7795_CLK_S0D1), + DEF_MOD("fcpci1", 616, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fcpci0", 617, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("fcpcs", 619, R8A7795_CLK_S0D1), + DEF_MOD("vspd3", 620, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("vspd2", 621, R8A7795_CLK_S0D2), + DEF_MOD("vspd1", 622, R8A7795_CLK_S0D2), + DEF_MOD("vspd0", 623, R8A7795_CLK_S0D2), + DEF_MOD("vspbc", 624, R8A7795_CLK_S0D1), + DEF_MOD("vspbd", 626, R8A7795_CLK_S0D1), + DEF_MOD("vspi2", 629, R8A7795_CLK_S2D1), /* ES1.x */ + DEF_MOD("vspi1", 630, R8A7795_CLK_S0D1), + DEF_MOD("vspi0", 631, R8A7795_CLK_S0D1), + DEF_MOD("ehci3", 700, R8A7795_CLK_S3D4), + DEF_MOD("ehci2", 701, R8A7795_CLK_S3D4), + DEF_MOD("ehci1", 702, R8A7795_CLK_S3D4), + DEF_MOD("ehci0", 703, R8A7795_CLK_S3D4), + DEF_MOD("hsusb", 704, R8A7795_CLK_S3D4), + DEF_MOD("hsusb3", 705, R8A7795_CLK_S3D4), + DEF_MOD("csi21", 713, R8A7795_CLK_CSI0), /* ES1.x */ + DEF_MOD("csi20", 714, R8A7795_CLK_CSI0), + DEF_MOD("csi41", 715, R8A7795_CLK_CSI0), + DEF_MOD("csi40", 716, R8A7795_CLK_CSI0), + DEF_MOD("du3", 721, R8A7795_CLK_S2D1), + DEF_MOD("du2", 722, R8A7795_CLK_S2D1), + DEF_MOD("du1", 723, R8A7795_CLK_S2D1), + DEF_MOD("du0", 724, R8A7795_CLK_S2D1), + DEF_MOD("lvds", 727, R8A7795_CLK_S0D4), + DEF_MOD("hdmi1", 728, R8A7795_CLK_HDMI), + DEF_MOD("hdmi0", 729, R8A7795_CLK_HDMI), + DEF_MOD("vin7", 804, R8A7795_CLK_S0D2), + DEF_MOD("vin6", 805, R8A7795_CLK_S0D2), + DEF_MOD("vin5", 806, R8A7795_CLK_S0D2), + DEF_MOD("vin4", 807, R8A7795_CLK_S0D2), + DEF_MOD("vin3", 808, R8A7795_CLK_S0D2), + DEF_MOD("vin2", 809, R8A7795_CLK_S0D2), + DEF_MOD("vin1", 810, R8A7795_CLK_S0D2), + DEF_MOD("vin0", 811, R8A7795_CLK_S0D2), + DEF_MOD("etheravb", 812, R8A7795_CLK_S0D6), + DEF_MOD("sata0", 815, R8A7795_CLK_S3D2), + DEF_MOD("imr3", 820, R8A7795_CLK_S0D2), + DEF_MOD("imr2", 821, R8A7795_CLK_S0D2), + DEF_MOD("imr1", 822, R8A7795_CLK_S0D2), + DEF_MOD("imr0", 823, R8A7795_CLK_S0D2), + DEF_MOD("gpio7", 905, R8A7795_CLK_S3D4), + DEF_MOD("gpio6", 906, R8A7795_CLK_S3D4), + DEF_MOD("gpio5", 907, R8A7795_CLK_S3D4), + DEF_MOD("gpio4", 908, R8A7795_CLK_S3D4), + DEF_MOD("gpio3", 909, R8A7795_CLK_S3D4), + DEF_MOD("gpio2", 910, R8A7795_CLK_S3D4), + DEF_MOD("gpio1", 911, R8A7795_CLK_S3D4), + DEF_MOD("gpio0", 912, R8A7795_CLK_S3D4), + DEF_MOD("can-fd", 914, R8A7795_CLK_S3D2), + DEF_MOD("can-if1", 915, R8A7795_CLK_S3D4), + DEF_MOD("can-if0", 916, R8A7795_CLK_S3D4), + DEF_MOD("i2c6", 918, R8A7795_CLK_S0D6), + DEF_MOD("i2c5", 919, R8A7795_CLK_S0D6), + DEF_MOD("i2c-dvfs", 926, R8A7795_CLK_CP), + DEF_MOD("i2c4", 927, R8A7795_CLK_S0D6), + DEF_MOD("i2c3", 928, R8A7795_CLK_S0D6), + DEF_MOD("i2c2", 929, R8A7795_CLK_S3D2), + DEF_MOD("i2c1", 930, R8A7795_CLK_S3D2), + DEF_MOD("i2c0", 931, R8A7795_CLK_S3D2), + DEF_MOD("ssi-all", 1005, R8A7795_CLK_S3D4), + DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)), + DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)), + DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)), + DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)), + DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)), + DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)), + DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)), + DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)), + DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)), + DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)), + DEF_MOD("scu-all", 1017, R8A7795_CLK_S3D4), + DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)), + DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)), + DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)), + DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)), + DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)), + DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)), + DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)), + DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)), + DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)), + DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)), + DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)), + DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)), +}; + +static const struct mssr_mod_clk r8a7796_mod_clks[] = { + DEF_MOD("scif5", 202, R8A7796_CLK_S3D4), + DEF_MOD("scif4", 203, R8A7796_CLK_S3D4), + DEF_MOD("scif3", 204, R8A7796_CLK_S3D4), + DEF_MOD("scif1", 206, R8A7796_CLK_S3D4), + DEF_MOD("scif0", 207, R8A7796_CLK_S3D4), + DEF_MOD("msiof3", 208, R8A7796_CLK_MSO), + DEF_MOD("msiof2", 209, R8A7796_CLK_MSO), + DEF_MOD("msiof1", 210, R8A7796_CLK_MSO), + DEF_MOD("msiof0", 211, R8A7796_CLK_MSO), + DEF_MOD("sys-dmac2", 217, R8A7796_CLK_S0D3), + DEF_MOD("sys-dmac1", 218, R8A7796_CLK_S0D3), + DEF_MOD("sys-dmac0", 219, R8A7796_CLK_S0D3), + DEF_MOD("cmt3", 300, R8A7796_CLK_R), + DEF_MOD("cmt2", 301, R8A7796_CLK_R), + DEF_MOD("cmt1", 302, R8A7796_CLK_R), + DEF_MOD("cmt0", 303, R8A7796_CLK_R), + DEF_MOD("scif2", 310, R8A7796_CLK_S3D4), + DEF_MOD("sdif3", 311, R8A7796_CLK_SD3), + DEF_MOD("sdif2", 312, R8A7796_CLK_SD2), + DEF_MOD("sdif1", 313, R8A7796_CLK_SD1), + DEF_MOD("sdif0", 314, R8A7796_CLK_SD0), + DEF_MOD("pcie1", 318, R8A7796_CLK_S3D1), + DEF_MOD("pcie0", 319, R8A7796_CLK_S3D1), + DEF_MOD("usb-dmac0", 330, R8A7796_CLK_S3D1), + DEF_MOD("usb-dmac1", 331, R8A7796_CLK_S3D1), + DEF_MOD("rwdt", 402, R8A7796_CLK_R), + DEF_MOD("intc-ex", 407, R8A7796_CLK_CP), + DEF_MOD("intc-ap", 408, R8A7796_CLK_S3D1), + DEF_MOD("audmac1", 501, R8A7796_CLK_S0D3), + DEF_MOD("audmac0", 502, R8A7796_CLK_S0D3), + DEF_MOD("drif7", 508, R8A7796_CLK_S3D2), + DEF_MOD("drif6", 509, R8A7796_CLK_S3D2), + DEF_MOD("drif5", 510, R8A7796_CLK_S3D2), + DEF_MOD("drif4", 511, R8A7796_CLK_S3D2), + DEF_MOD("drif3", 512, R8A7796_CLK_S3D2), + DEF_MOD("drif2", 513, R8A7796_CLK_S3D2), + DEF_MOD("drif1", 514, R8A7796_CLK_S3D2), + DEF_MOD("drif0", 515, R8A7796_CLK_S3D2), + DEF_MOD("hscif4", 516, R8A7796_CLK_S3D1), + DEF_MOD("hscif3", 517, R8A7796_CLK_S3D1), + DEF_MOD("hscif2", 518, R8A7796_CLK_S3D1), + DEF_MOD("hscif1", 519, R8A7796_CLK_S3D1), + DEF_MOD("hscif0", 520, R8A7796_CLK_S3D1), + DEF_MOD("thermal", 522, R8A7796_CLK_CP), + DEF_MOD("pwm", 523, R8A7796_CLK_S0D12), + DEF_MOD("fcpvd2", 601, R8A7796_CLK_S0D2), + DEF_MOD("fcpvd1", 602, R8A7796_CLK_S0D2), + DEF_MOD("fcpvd0", 603, R8A7796_CLK_S0D2), + DEF_MOD("fcpvb0", 607, R8A7796_CLK_S0D1), + DEF_MOD("fcpvi0", 611, R8A7796_CLK_S0D1), + DEF_MOD("fcpf0", 615, R8A7796_CLK_S0D1), + DEF_MOD("fcpci0", 617, R8A7796_CLK_S0D2), + DEF_MOD("fcpcs", 619, R8A7796_CLK_S0D2), + DEF_MOD("vspd2", 621, R8A7796_CLK_S0D2), + DEF_MOD("vspd1", 622, R8A7796_CLK_S0D2), + DEF_MOD("vspd0", 623, R8A7796_CLK_S0D2), + DEF_MOD("vspb", 626, R8A7796_CLK_S0D1), + DEF_MOD("vspi0", 631, R8A7796_CLK_S0D1), + DEF_MOD("ehci1", 702, R8A7796_CLK_S3D4), + DEF_MOD("ehci0", 703, R8A7796_CLK_S3D4), + DEF_MOD("hsusb", 704, R8A7796_CLK_S3D4), + DEF_MOD("csi20", 714, R8A7796_CLK_CSI0), + DEF_MOD("csi40", 716, R8A7796_CLK_CSI0), + DEF_MOD("du2", 722, R8A7796_CLK_S2D1), + DEF_MOD("du1", 723, R8A7796_CLK_S2D1), + DEF_MOD("du0", 724, R8A7796_CLK_S2D1), + DEF_MOD("lvds", 727, R8A7796_CLK_S2D1), + DEF_MOD("hdmi0", 729, R8A7796_CLK_HDMI), + DEF_MOD("vin7", 804, R8A7796_CLK_S0D2), + DEF_MOD("vin6", 805, R8A7796_CLK_S0D2), + DEF_MOD("vin5", 806, R8A7796_CLK_S0D2), + DEF_MOD("vin4", 807, R8A7796_CLK_S0D2), + DEF_MOD("vin3", 808, R8A7796_CLK_S0D2), + DEF_MOD("vin2", 809, R8A7796_CLK_S0D2), + DEF_MOD("vin1", 810, R8A7796_CLK_S0D2), + DEF_MOD("vin0", 811, R8A7796_CLK_S0D2), + DEF_MOD("etheravb", 812, R8A7796_CLK_S0D6), + DEF_MOD("imr1", 822, R8A7796_CLK_S0D2), + DEF_MOD("imr0", 823, R8A7796_CLK_S0D2), + DEF_MOD("gpio7", 905, R8A7796_CLK_S3D4), + DEF_MOD("gpio6", 906, R8A7796_CLK_S3D4), + DEF_MOD("gpio5", 907, R8A7796_CLK_S3D4), + DEF_MOD("gpio4", 908, R8A7796_CLK_S3D4), + DEF_MOD("gpio3", 909, R8A7796_CLK_S3D4), + DEF_MOD("gpio2", 910, R8A7796_CLK_S3D4), + DEF_MOD("gpio1", 911, R8A7796_CLK_S3D4), + DEF_MOD("gpio0", 912, R8A7796_CLK_S3D4), + DEF_MOD("can-fd", 914, R8A7796_CLK_S3D2), + DEF_MOD("can-if1", 915, R8A7796_CLK_S3D4), + DEF_MOD("can-if0", 916, R8A7796_CLK_S3D4), + DEF_MOD("i2c6", 918, R8A7796_CLK_S0D6), + DEF_MOD("i2c5", 919, R8A7796_CLK_S0D6), + DEF_MOD("i2c-dvfs", 926, R8A7796_CLK_CP), + DEF_MOD("i2c4", 927, R8A7796_CLK_S0D6), + DEF_MOD("i2c3", 928, R8A7796_CLK_S0D6), + DEF_MOD("i2c2", 929, R8A7796_CLK_S3D2), + DEF_MOD("i2c1", 930, R8A7796_CLK_S3D2), + DEF_MOD("i2c0", 931, R8A7796_CLK_S3D2), + DEF_MOD("ssi-all", 1005, R8A7796_CLK_S3D4), + DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)), + DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)), + DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)), + DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)), + DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)), + DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)), + DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)), + DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)), + DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)), + DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)), + DEF_MOD("scu-all", 1017, R8A7796_CLK_S3D4), + DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)), + DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)), + DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)), + DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)), + DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)), + DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)), + DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)), + DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)), + DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)), + DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)), + DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)), + DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)), +}; + +/* + * CPG Clock Data + */ + +/* + * MD EXTAL PLL0 PLL1 PLL2 PLL3 PLL4 + * 14 13 19 17 (MHz) + *------------------------------------------------------------------- + * 0 0 0 0 16.66 x 1 x180 x192 x144 x192 x144 + * 0 0 0 1 16.66 x 1 x180 x192 x144 x128 x144 + * 0 0 1 0 Prohibited setting + * 0 0 1 1 16.66 x 1 x180 x192 x144 x192 x144 + * 0 1 0 0 20 x 1 x150 x160 x120 x160 x120 + * 0 1 0 1 20 x 1 x150 x160 x120 x106 x120 + * 0 1 1 0 Prohibited setting + * 0 1 1 1 20 x 1 x150 x160 x120 x160 x120 + * 1 0 0 0 25 x 1 x120 x128 x96 x128 x96 + * 1 0 0 1 25 x 1 x120 x128 x96 x84 x96 + * 1 0 1 0 Prohibited setting + * 1 0 1 1 25 x 1 x120 x128 x96 x128 x96 + * 1 1 0 0 33.33 / 2 x180 x192 x144 x192 x144 + * 1 1 0 1 33.33 / 2 x180 x192 x144 x128 x144 + * 1 1 1 0 Prohibited setting + * 1 1 1 1 33.33 / 2 x180 x192 x144 x192 x144 + */ +#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 11) | \ + (((md) & BIT(13)) >> 11) | \ + (((md) & BIT(19)) >> 18) | \ + (((md) & BIT(17)) >> 17)) + +static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] = { + /* EXTAL div PLL1 mult PLL3 mult */ + { 1, 192, 192, }, + { 1, 192, 128, }, + { 0, /* Prohibited setting */ }, + { 1, 192, 192, }, + { 1, 160, 160, }, + { 1, 160, 106, }, + { 0, /* Prohibited setting */ }, + { 1, 160, 160, }, + { 1, 128, 128, }, + { 1, 128, 84, }, + { 0, /* Prohibited setting */ }, + { 1, 128, 128, }, + { 2, 192, 192, }, + { 2, 192, 128, }, + { 0, /* Prohibited setting */ }, + { 2, 192, 192, }, +}; + +/* + * SDn Clock + */ +#define CPG_SD_STP_HCK BIT(9) +#define CPG_SD_STP_CK BIT(8) + +#define CPG_SD_STP_MASK (CPG_SD_STP_HCK | CPG_SD_STP_CK) +#define CPG_SD_FC_MASK (0x7 << 2 | 0x3 << 0) + +#define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \ +{ \ + .val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \ + ((stp_ck) ? CPG_SD_STP_CK : 0) | \ + ((sd_srcfc) << 2) | \ + ((sd_fc) << 0), \ + .div = (sd_div), \ +} + +struct sd_div_table { + u32 val; + unsigned int div; +}; + +/* SDn divider + * sd_srcfc sd_fc div + * stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc + *------------------------------------------------------------------- + * 0 0 0 (1) 1 (4) 4 + * 0 0 1 (2) 1 (4) 8 + * 1 0 2 (4) 1 (4) 16 + * 1 0 3 (8) 1 (4) 32 + * 1 0 4 (16) 1 (4) 64 + * 0 0 0 (1) 0 (2) 2 + * 0 0 1 (2) 0 (2) 4 + * 1 0 2 (4) 0 (2) 8 + * 1 0 3 (8) 0 (2) 16 + * 1 0 4 (16) 0 (2) 32 + */ +static const struct sd_div_table cpg_sd_div_table[] = { +/* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */ + CPG_SD_DIV_TABLE_DATA(0, 0, 0, 1, 4), + CPG_SD_DIV_TABLE_DATA(0, 0, 1, 1, 8), + CPG_SD_DIV_TABLE_DATA(1, 0, 2, 1, 16), + CPG_SD_DIV_TABLE_DATA(1, 0, 3, 1, 32), + CPG_SD_DIV_TABLE_DATA(1, 0, 4, 1, 64), + CPG_SD_DIV_TABLE_DATA(0, 0, 0, 0, 2), + CPG_SD_DIV_TABLE_DATA(0, 0, 1, 0, 4), + CPG_SD_DIV_TABLE_DATA(1, 0, 2, 0, 8), + CPG_SD_DIV_TABLE_DATA(1, 0, 3, 0, 16), + CPG_SD_DIV_TABLE_DATA(1, 0, 4, 0, 32), +}; + +static bool gen3_clk_is_mod(struct clk *clk) +{ + return (clk->id >> 16) == CPG_MOD; +} + +static int gen3_clk_get_mod(struct clk *clk, const struct mssr_mod_clk **mssr) +{ + struct gen3_clk_priv *priv = dev_get_priv(clk->dev); + const unsigned long clkid = clk->id & 0xffff; + int i; + + if (!gen3_clk_is_mod(clk)) + return -EINVAL; + + for (i = 0; i < priv->mod_clk_size; i++) { + if (priv->mod_clk[i].id != MOD_CLK_ID(clkid)) + continue; + + *mssr = &priv->mod_clk[i]; + return 0; + } + + return -ENODEV; +} + +static int gen3_clk_get_core(struct clk *clk, const struct cpg_core_clk **core) +{ + const unsigned long clkid = clk->id & 0xffff; + int i; + + if (gen3_clk_is_mod(clk)) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(gen3_core_clks); i++) { + if (gen3_core_clks[i].id != clkid) + continue; + + *core = &gen3_core_clks[i]; + return 0; + } + + return -ENODEV; +} + +static int gen3_clk_get_parent(struct clk *clk, struct clk *parent) +{ + const struct cpg_core_clk *core; + const struct mssr_mod_clk *mssr; + int ret; + + if (gen3_clk_is_mod(clk)) { + ret = gen3_clk_get_mod(clk, &mssr); + if (ret) + return ret; + + parent->id = mssr->parent; + } else { + ret = gen3_clk_get_core(clk, &core); + if (ret) + return ret; + + if (core->type == CLK_TYPE_IN) + parent->id = ~0; /* Top-level clock */ + else + parent->id = core->parent; + } + + parent->dev = clk->dev; + + return 0; +} + +static int gen3_clk_endisable(struct clk *clk, bool enable) +{ + struct gen3_clk_priv *priv = dev_get_priv(clk->dev); + const unsigned long clkid = clk->id & 0xffff; + const unsigned int reg = clkid / 100; + const unsigned int bit = clkid % 100; + const u32 bitmask = BIT(bit); + + if (!gen3_clk_is_mod(clk)) + return -EINVAL; + + debug("%s[%i] MSTP %lu=%02u/%02u %s\n", __func__, __LINE__, + clkid, reg, bit, enable ? "ON" : "OFF"); + + if (enable) { + clrbits_le32(priv->base + SMSTPCR(reg), bitmask); + return wait_for_bit("MSTP", priv->base + MSTPSR(reg), + bitmask, 0, 100, 0); + } else { + setbits_le32(priv->base + SMSTPCR(reg), bitmask); + return 0; + } +} + +static int gen3_clk_enable(struct clk *clk) +{ + return gen3_clk_endisable(clk, true); +} + +static int gen3_clk_disable(struct clk *clk) +{ + return gen3_clk_endisable(clk, false); +} + +static ulong gen3_clk_get_rate(struct clk *clk) +{ + struct gen3_clk_priv *priv = dev_get_priv(clk->dev); + struct clk parent; + const struct cpg_core_clk *core; + const struct rcar_gen3_cpg_pll_config *pll_config = + priv->cpg_pll_config; + u32 value, mult, rate = 0; + int i, ret; + + debug("%s[%i] Clock: id=%lu\n", __func__, __LINE__, clk->id); + + ret = gen3_clk_get_parent(clk, &parent); + if (ret) { + printf("%s[%i] parent fail, ret=%i\n", __func__, __LINE__, ret); + return ret; + } + + if (gen3_clk_is_mod(clk)) { + rate = gen3_clk_get_rate(&parent); + debug("%s[%i] MOD clk: parent=%lu => rate=%u\n", + __func__, __LINE__, parent.id, rate); + return rate; + } + + ret = gen3_clk_get_core(clk, &core); + if (ret) + return ret; + + switch (core->type) { + case CLK_TYPE_IN: + if (core->id == CLK_EXTAL) { + rate = clk_get_rate(&priv->clk_extal); + debug("%s[%i] EXTAL clk: rate=%u\n", + __func__, __LINE__, rate); + return rate; + } + + if (core->id == CLK_EXTALR) { + rate = clk_get_rate(&priv->clk_extalr); + debug("%s[%i] EXTALR clk: rate=%u\n", + __func__, __LINE__, rate); + return rate; + } + + return -EINVAL; + + case CLK_TYPE_GEN3_MAIN: + rate = gen3_clk_get_rate(&parent) / pll_config->extal_div; + debug("%s[%i] MAIN clk: parent=%i extal_div=%i => rate=%u\n", + __func__, __LINE__, + core->parent, pll_config->extal_div, rate); + return rate; + + case CLK_TYPE_GEN3_PLL0: + value = readl(priv->base + CPG_PLL0CR); + mult = (((value >> 24) & 0x7f) + 1) * 2; + rate = gen3_clk_get_rate(&parent) * mult; + debug("%s[%i] PLL0 clk: parent=%i mult=%u => rate=%u\n", + __func__, __LINE__, core->parent, mult, rate); + return rate; + + case CLK_TYPE_GEN3_PLL1: + rate = gen3_clk_get_rate(&parent) * pll_config->pll1_mult; + debug("%s[%i] PLL1 clk: parent=%i mul=%i => rate=%u\n", + __func__, __LINE__, + core->parent, pll_config->pll1_mult, rate); + return rate; + + case CLK_TYPE_GEN3_PLL2: + value = readl(priv->base + CPG_PLL2CR); + mult = (((value >> 24) & 0x7f) + 1) * 2; + rate = gen3_clk_get_rate(&parent) * mult; + debug("%s[%i] PLL2 clk: parent=%i mult=%u => rate=%u\n", + __func__, __LINE__, core->parent, mult, rate); + return rate; + + case CLK_TYPE_GEN3_PLL3: + rate = gen3_clk_get_rate(&parent) * pll_config->pll3_mult; + debug("%s[%i] PLL3 clk: parent=%i mul=%i => rate=%u\n", + __func__, __LINE__, + core->parent, pll_config->pll3_mult, rate); + return rate; + + case CLK_TYPE_GEN3_PLL4: + value = readl(priv->base + CPG_PLL4CR); + mult = (((value >> 24) & 0x7f) + 1) * 2; + rate = gen3_clk_get_rate(&parent) * mult; + debug("%s[%i] PLL4 clk: parent=%i mult=%u => rate=%u\n", + __func__, __LINE__, core->parent, mult, rate); + return rate; + + case CLK_TYPE_FF: + rate = (gen3_clk_get_rate(&parent) * core->mult) / core->div; + debug("%s[%i] FIXED clk: parent=%i div=%i mul=%i => rate=%u\n", + __func__, __LINE__, + core->parent, core->mult, core->div, rate); + return rate; + + case CLK_TYPE_GEN3_SD: /* FIXME */ + value = readl(priv->base + core->offset); + value &= CPG_SD_STP_MASK | CPG_SD_FC_MASK; + + for (i = 0; i < ARRAY_SIZE(cpg_sd_div_table); i++) { + if (cpg_sd_div_table[i].val != value) + continue; + + rate = gen3_clk_get_rate(&parent) / + cpg_sd_div_table[i].div; + debug("%s[%i] SD clk: parent=%i div=%i => rate=%u\n", + __func__, __LINE__, + core->parent, cpg_sd_div_table[i].div, rate); + + return rate; + } + + return -EINVAL; + } + + printf("%s[%i] unknown fail\n", __func__, __LINE__); + + return -ENOENT; +} + +static ulong gen3_clk_set_rate(struct clk *clk, ulong rate) +{ + return gen3_clk_get_rate(clk); +} + +static int gen3_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) +{ + if (args->args_count != 2) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + clk->id = (args->args[0] << 16) | args->args[1]; + + return 0; +} + +static const struct clk_ops gen3_clk_ops = { + .enable = gen3_clk_enable, + .disable = gen3_clk_disable, + .get_rate = gen3_clk_get_rate, + .set_rate = gen3_clk_set_rate, + .of_xlate = gen3_clk_of_xlate, +}; + +enum gen3_clk_model { + CLK_R8A7795, + CLK_R8A7796, +}; + +static int gen3_clk_probe(struct udevice *dev) +{ + struct gen3_clk_priv *priv = dev_get_priv(dev); + enum gen3_clk_model model = dev_get_driver_data(dev); + fdt_addr_t rst_base; + u32 cpg_mode; + int ret; + + priv->base = (struct gen3_base *)devfdt_get_addr(dev); + if (!priv->base) + return -EINVAL; + + switch (model) { + case CLK_R8A7795: + priv->mod_clk = r8a7795_mod_clks; + priv->mod_clk_size = ARRAY_SIZE(r8a7795_mod_clks); + ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "renesas,r8a7795-rst"); + if (ret < 0) + return ret; + break; + case CLK_R8A7796: + priv->mod_clk = r8a7796_mod_clks; + priv->mod_clk_size = ARRAY_SIZE(r8a7796_mod_clks); + ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "renesas,r8a7796-rst"); + if (ret < 0) + return ret; + break; + default: + return -EINVAL; + } + + rst_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg"); + if (rst_base == FDT_ADDR_T_NONE) + return -EINVAL; + + cpg_mode = readl(rst_base + CPG_RST_MODEMR); + + priv->cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)]; + if (!priv->cpg_pll_config->extal_div) + return -EINVAL; + + ret = clk_get_by_name(dev, "extal", &priv->clk_extal); + if (ret < 0) + return ret; + + ret = clk_get_by_name(dev, "extalr", &priv->clk_extalr); + if (ret < 0) + return ret; + + return 0; +} + +static const struct udevice_id gen3_clk_ids[] = { + { .compatible = "renesas,r8a7795-cpg-mssr", .data = CLK_R8A7795 }, + { .compatible = "renesas,r8a7796-cpg-mssr", .data = CLK_R8A7796 }, + { } +}; + +U_BOOT_DRIVER(clk_gen3) = { + .name = "clk_gen3", + .id = UCLASS_CLK, + .of_match = gen3_clk_ids, + .priv_auto_alloc_size = sizeof(struct gen3_clk_priv), + .ops = &gen3_clk_ops, + .probe = gen3_clk_probe, +}; -- 2.11.0

2 5

[U-Boot] [PATCH 1/2] ARM: dts: rmobile: Import DTS from Linux 4.12
by Marek Vasut 03 Aug '17

03 Aug '17

Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.12-rc6, commit 6f7da290413ba713f0cdd9ff1a2a9bb129ef4f6c . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- arch/arm/dts/Makefile | 6 + arch/arm/dts/r8a7795-h3ulcb.dts | 376 ++++++ arch/arm/dts/r8a7795-salvator-x.dts | 584 ++++++++ arch/arm/dts/r8a7795.dtsi | 1866 ++++++++++++++++++++++++++ arch/arm/dts/r8a7796-m3ulcb.dts | 188 +++ arch/arm/dts/r8a7796-salvator-x.dts | 269 ++++ arch/arm/dts/r8a7796.dtsi | 1037 ++++++++++++++ include/dt-bindings/clock/r8a7795-cpg-mssr.h | 70 + include/dt-bindings/clock/r8a7796-cpg-mssr.h | 69 + include/dt-bindings/clock/renesas-cpg-mssr.h | 15 + include/dt-bindings/power/r8a7795-sysc.h | 42 + include/dt-bindings/power/r8a7796-sysc.h | 36 + 12 files changed, 4558 insertions(+) create mode 100644 arch/arm/dts/r8a7795-h3ulcb.dts create mode 100644 arch/arm/dts/r8a7795-salvator-x.dts create mode 100644 arch/arm/dts/r8a7795.dtsi create mode 100644 arch/arm/dts/r8a7796-m3ulcb.dts create mode 100644 arch/arm/dts/r8a7796-salvator-x.dts create mode 100644 arch/arm/dts/r8a7796.dtsi create mode 100644 include/dt-bindings/clock/r8a7795-cpg-mssr.h create mode 100644 include/dt-bindings/clock/r8a7796-cpg-mssr.h create mode 100644 include/dt-bindings/clock/renesas-cpg-mssr.h create mode 100644 include/dt-bindings/power/r8a7795-sysc.h create mode 100644 include/dt-bindings/power/r8a7796-sysc.h diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 132fa69fe5..422b88bc9a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -370,6 +370,12 @@ dtb-$(CONFIG_MX7) += imx7-colibri.dtb \ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb +dtb-$(CONFIG_RCAR_GEN3) += \ + r8a7795-h3ulcb.dtb \ + r8a7795-salvator-x.dtb \ + r8a7796-m3ulcb.dtb \ + r8a7796-salvator-x.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ diff --git a/arch/arm/dts/r8a7795-h3ulcb.dts b/arch/arm/dts/r8a7795-h3ulcb.dts new file mode 100644 index 0000000000..ab352159de --- /dev/null +++ b/arch/arm/dts/r8a7795-h3ulcb.dts @@ -0,0 +1,376 @@ +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7795.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas H3ULCB board based on r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + avb_pins: avb { + groups = "avb_mdc"; + function = "avb"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/arm/dts/r8a7795-salvator-x.dts b/arch/arm/dts/r8a7795-salvator-x.dts new file mode 100644 index 0000000000..639aa085d9 --- /dev/null +++ b/arch/arm/dts/r8a7795-salvator-x.dts @@ -0,0 +1,584 @@ +/* + * Device Tree Source for the Salvator-X board + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * SSI-AK4613 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + +/dts-v1/; +#include "r8a7795.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas Salvator-X board based on r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795"; + + aliases { + serial0 = &scif2; + serial1 = &scif1; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + audio_clkout: audio_clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + port@3 { + lvds_connector: endpoint { + }; + }; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_phy_int", "avb_mdc", + "avb_mii"; + function = "avb"; + }; + + pins_mdc { + groups = "avb_mdc"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; + function = "du"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + + pwen { + pins = "GP_6_26"; + bias-pull-down; + }; + }; + + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&i2c_dvfs { + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&xhci0 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&hsusb { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm/dts/r8a7795.dtsi b/arch/arm/dts/r8a7795.dtsi new file mode 100644 index 0000000000..e99d6443b3 --- /dev/null +++ b/arch/arm/dts/r8a7795.dtsi @@ -0,0 +1,1866 @@ +/* + * Device Tree Source for the r8a7795 SoC + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7795-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a7795-sysc.h> + +/ { + compatible = "renesas,r8a7795"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_2: cpu@2 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x2>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU2>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_3: cpu@3 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x3>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA57_CPU3>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7795_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7795_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + wdt0: watchdog@e6020000 { + compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7795", + "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>, + <&a57_2>, + <&a57_3>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7795-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7795"; + reg = <0 0xe6060000 0 0x50c>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a7795", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7795", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a7795", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a7795-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7795_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 96>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 96>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 96>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7795", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7795", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a7795"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + xhci1: usb@ee0400000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7795"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2_phy2: usb-phy@ee0c0200 { + compatible = "renesas,usb2-phy-r8a7795", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0c0200 0 0x700>; + clocks = <&cpg CPG_MOD 701>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; + #phy-cells = <0>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci2: usb@ee0c0100 { + compatible = "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ohci2: usb@ee0c0000 { + compatible = "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 701>; + phys = <&usb2_phy2>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7795", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a7795", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a7795", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; + + fcpvb1: fcp@fe92f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe92f000 0 0x200>; + clocks = <&cpg CPG_MOD 606>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 606>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 615>; + }; + + fcpf1: fcp@fe951000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe951000 0 0x200>; + clocks = <&cpg CPG_MOD 614>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 614>; + }; + + fcpf2: fcp@fe952000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe952000 0 0x200>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 613>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 607>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 611>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; + + renesas,fcp = <&fcpvi1>; + }; + + fcpvi1: fcp@fe9bf000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9bf000 0 0x200>; + clocks = <&cpg CPG_MOD 610>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 610>; + }; + + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 629>; + + renesas,fcp = <&fcpvi2>; + }; + + fcpvi2: fcp@fe9cf000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9cf000 0 0x200>; + clocks = <&cpg CPG_MOD 609>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 609>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x4000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x4000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x4000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 601>; + }; + + vspd3: vsp@fea38000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea38000 0 0x4000>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 620>; + + renesas,fcp = <&fcpvd3>; + }; + + fcpvd3: fcp@fea3f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fdp1@fe944000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe944000 0 0x2400>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 118>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 118>; + renesas,fcp = <&fcpf1>; + }; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; + renesas,fcp = <&fcpf2>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0 0xfeb00000 0 0x80000>, + <0 0xfeb90000 0 0x14>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_hdmi1: endpoint { + }; + }; + port@3 { + reg = <3>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7795-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/r8a7796-m3ulcb.dts b/arch/arm/dts/r8a7796-m3ulcb.dts new file mode 100644 index 0000000000..372b2a9447 --- /dev/null +++ b/arch/arm/dts/r8a7796-m3ulcb.dts @@ -0,0 +1,188 @@ +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas M3ULCB board based on r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796"; + + aliases { + serial0 = &scif2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm/dts/r8a7796-salvator-x.dts b/arch/arm/dts/r8a7796-salvator-x.dts new file mode 100644 index 0000000000..c9f59b6ce3 --- /dev/null +++ b/arch/arm/dts/r8a7796-salvator-x.dts @@ -0,0 +1,269 @@ +/* + * Device Tree Source for the Salvator-X board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Renesas Salvator-X board based on r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796"; + + aliases { + serial0 = &scif2; + serial1 = &scif1; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + groups = "avb_mdc"; + function = "avb"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&reg_3p3v>; + vqmmc-supply = <&reg_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; + +&i2c_dvfs { + status = "okay"; +}; diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi new file mode 100644 index 0000000000..2ec1ed5f49 --- /dev/null +++ b/arch/arm/dts/r8a7796.dtsi @@ -0,0 +1,1037 @@ +/* + * Device Tree Source for the r8a7796 SoC + * + * Copyright (C) 2016 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7796-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a7796-sysc.h> + +/ { + compatible = "renesas,r8a7796"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A7796_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7796_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + wdt0: watchdog@e6020000 { + compatible = "renesas,r8a7796-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7796"; + reg = <0 0xe6060000 0 0x50c>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7796-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7796-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7796-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7796", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a7796", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a7796", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a7796-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A7796_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7796", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a7796", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7796-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + }; +}; diff --git a/include/dt-bindings/clock/r8a7795-cpg-mssr.h b/include/dt-bindings/clock/r8a7795-cpg-mssr.h new file mode 100644 index 0000000000..f047eaf261 --- /dev/null +++ b/include/dt-bindings/clock/r8a7795-cpg-mssr.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a7795 CPG Core Clocks */ +#define R8A7795_CLK_Z 0 +#define R8A7795_CLK_Z2 1 +#define R8A7795_CLK_ZR 2 +#define R8A7795_CLK_ZG 3 +#define R8A7795_CLK_ZTR 4 +#define R8A7795_CLK_ZTRD2 5 +#define R8A7795_CLK_ZT 6 +#define R8A7795_CLK_ZX 7 +#define R8A7795_CLK_S0D1 8 +#define R8A7795_CLK_S0D4 9 +#define R8A7795_CLK_S1D1 10 +#define R8A7795_CLK_S1D2 11 +#define R8A7795_CLK_S1D4 12 +#define R8A7795_CLK_S2D1 13 +#define R8A7795_CLK_S2D2 14 +#define R8A7795_CLK_S2D4 15 +#define R8A7795_CLK_S3D1 16 +#define R8A7795_CLK_S3D2 17 +#define R8A7795_CLK_S3D4 18 +#define R8A7795_CLK_LB 19 +#define R8A7795_CLK_CL 20 +#define R8A7795_CLK_ZB3 21 +#define R8A7795_CLK_ZB3D2 22 +#define R8A7795_CLK_CR 23 +#define R8A7795_CLK_CRD2 24 +#define R8A7795_CLK_SD0H 25 +#define R8A7795_CLK_SD0 26 +#define R8A7795_CLK_SD1H 27 +#define R8A7795_CLK_SD1 28 +#define R8A7795_CLK_SD2H 29 +#define R8A7795_CLK_SD2 30 +#define R8A7795_CLK_SD3H 31 +#define R8A7795_CLK_SD3 32 +#define R8A7795_CLK_SSP2 33 +#define R8A7795_CLK_SSP1 34 +#define R8A7795_CLK_SSPRS 35 +#define R8A7795_CLK_RPC 36 +#define R8A7795_CLK_RPCD2 37 +#define R8A7795_CLK_MSO 38 +#define R8A7795_CLK_CANFD 39 +#define R8A7795_CLK_HDMI 40 +#define R8A7795_CLK_CSI0 41 +#define R8A7795_CLK_CSIREF 42 +#define R8A7795_CLK_CP 43 +#define R8A7795_CLK_CPEX 44 +#define R8A7795_CLK_R 45 +#define R8A7795_CLK_OSC 46 + +/* r8a7795 ES2.0 CPG Core Clocks */ +#define R8A7795_CLK_S0D2 47 +#define R8A7795_CLK_S0D3 48 +#define R8A7795_CLK_S0D6 49 +#define R8A7795_CLK_S0D8 50 +#define R8A7795_CLK_S0D12 51 + +#endif /* __DT_BINDINGS_CLOCK_R8A7795_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/r8a7796-cpg-mssr.h b/include/dt-bindings/clock/r8a7796-cpg-mssr.h new file mode 100644 index 0000000000..1e5942695f --- /dev/null +++ b/include/dt-bindings/clock/r8a7796-cpg-mssr.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2016 Renesas Electronics Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a7796 CPG Core Clocks */ +#define R8A7796_CLK_Z 0 +#define R8A7796_CLK_Z2 1 +#define R8A7796_CLK_ZR 2 +#define R8A7796_CLK_ZG 3 +#define R8A7796_CLK_ZTR 4 +#define R8A7796_CLK_ZTRD2 5 +#define R8A7796_CLK_ZT 6 +#define R8A7796_CLK_ZX 7 +#define R8A7796_CLK_S0D1 8 +#define R8A7796_CLK_S0D2 9 +#define R8A7796_CLK_S0D3 10 +#define R8A7796_CLK_S0D4 11 +#define R8A7796_CLK_S0D6 12 +#define R8A7796_CLK_S0D8 13 +#define R8A7796_CLK_S0D12 14 +#define R8A7796_CLK_S1D1 15 +#define R8A7796_CLK_S1D2 16 +#define R8A7796_CLK_S1D4 17 +#define R8A7796_CLK_S2D1 18 +#define R8A7796_CLK_S2D2 19 +#define R8A7796_CLK_S2D4 20 +#define R8A7796_CLK_S3D1 21 +#define R8A7796_CLK_S3D2 22 +#define R8A7796_CLK_S3D4 23 +#define R8A7796_CLK_LB 24 +#define R8A7796_CLK_CL 25 +#define R8A7796_CLK_ZB3 26 +#define R8A7796_CLK_ZB3D2 27 +#define R8A7796_CLK_ZB3D4 28 +#define R8A7796_CLK_CR 29 +#define R8A7796_CLK_CRD2 30 +#define R8A7796_CLK_SD0H 31 +#define R8A7796_CLK_SD0 32 +#define R8A7796_CLK_SD1H 33 +#define R8A7796_CLK_SD1 34 +#define R8A7796_CLK_SD2H 35 +#define R8A7796_CLK_SD2 36 +#define R8A7796_CLK_SD3H 37 +#define R8A7796_CLK_SD3 38 +#define R8A7796_CLK_SSP2 39 +#define R8A7796_CLK_SSP1 40 +#define R8A7796_CLK_SSPRS 41 +#define R8A7796_CLK_RPC 42 +#define R8A7796_CLK_RPCD2 43 +#define R8A7796_CLK_MSO 44 +#define R8A7796_CLK_CANFD 45 +#define R8A7796_CLK_HDMI 46 +#define R8A7796_CLK_CSI0 47 +#define R8A7796_CLK_CSIREF 48 +#define R8A7796_CLK_CP 49 +#define R8A7796_CLK_CPEX 50 +#define R8A7796_CLK_R 51 +#define R8A7796_CLK_OSC 52 + +#endif /* __DT_BINDINGS_CLOCK_R8A7796_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/renesas-cpg-mssr.h b/include/dt-bindings/clock/renesas-cpg-mssr.h new file mode 100644 index 0000000000..569a3cc33f --- /dev/null +++ b/include/dt-bindings/clock/renesas-cpg-mssr.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ + +#define CPG_CORE 0 /* Core Clock */ +#define CPG_MOD 1 /* Module Clock */ + +#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/power/r8a7795-sysc.h b/include/dt-bindings/power/r8a7795-sysc.h new file mode 100644 index 0000000000..ad679eeda1 --- /dev/null +++ b/include/dt-bindings/power/r8a7795-sysc.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7795_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7795_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7795_PD_CA57_CPU0 0 +#define R8A7795_PD_CA57_CPU1 1 +#define R8A7795_PD_CA57_CPU2 2 +#define R8A7795_PD_CA57_CPU3 3 +#define R8A7795_PD_CA53_CPU0 5 +#define R8A7795_PD_CA53_CPU1 6 +#define R8A7795_PD_CA53_CPU2 7 +#define R8A7795_PD_CA53_CPU3 8 +#define R8A7795_PD_A3VP 9 +#define R8A7795_PD_CA57_SCU 12 +#define R8A7795_PD_CR7 13 +#define R8A7795_PD_A3VC 14 +#define R8A7795_PD_3DG_A 17 +#define R8A7795_PD_3DG_B 18 +#define R8A7795_PD_3DG_C 19 +#define R8A7795_PD_3DG_D 20 +#define R8A7795_PD_CA53_SCU 21 +#define R8A7795_PD_3DG_E 22 +#define R8A7795_PD_A3IR 24 +#define R8A7795_PD_A2VC0 25 /* ES1.x only */ +#define R8A7795_PD_A2VC1 26 + +/* Always-on power area */ +#define R8A7795_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7795_SYSC_H__ */ diff --git a/include/dt-bindings/power/r8a7796-sysc.h b/include/dt-bindings/power/r8a7796-sysc.h new file mode 100644 index 0000000000..5b4daab44d --- /dev/null +++ b/include/dt-bindings/power/r8a7796-sysc.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7796_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7796_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7796_PD_CA57_CPU0 0 +#define R8A7796_PD_CA57_CPU1 1 +#define R8A7796_PD_CA53_CPU0 5 +#define R8A7796_PD_CA53_CPU1 6 +#define R8A7796_PD_CA53_CPU2 7 +#define R8A7796_PD_CA53_CPU3 8 +#define R8A7796_PD_CA57_SCU 12 +#define R8A7796_PD_CR7 13 +#define R8A7796_PD_A3VC 14 +#define R8A7796_PD_3DG_A 17 +#define R8A7796_PD_3DG_B 18 +#define R8A7796_PD_CA53_SCU 21 +#define R8A7796_PD_A3IR 24 +#define R8A7796_PD_A2VC0 25 +#define R8A7796_PD_A2VC1 26 + +/* Always-on power area */ +#define R8A7796_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7796_SYSC_H__ */ -- 2.11.0

2 3

[U-Boot] [PATCH] ARM: rmobile: Increase console buffer sizes
by Marek Vasut 03 Aug '17

03 Aug '17

Allow pasting extra long lines into the U-Boot console on RCar Gen3. This is OK since we have plenty of resources and it's convenient. Signed-off-by: Marek Vasut <marek.vasut+renesas(a)gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- include/configs/rcar-gen3-common.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 8da3e7a235..6c23249861 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -39,12 +39,12 @@ #define CONFIG_SH_GPIO_PFC /* console */ - +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_MAXARGS 64 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 } /* MEMORY */ -- 2.11.0

2 1