August 2017 - U-Boot

[U-Boot] [PATCH] ls1046aqds: update the defaule mtdparts
by xiaowei.bao 17 Aug '17

17 Aug '17

From: Bao Xiaowei <xiaowei.bao(a)nxp.com> modify the include/configs/ls1046aqds.h file, according to the latest partion rules, norflash nandflash dspiflash detailed partion as follows: mtd0: 00100000 00020000 "nor_bank0_rcw" mtd1: 00200000 00020000 "nor_bank0_uboot" mtd2: 00100000 00020000 "nor_bank0_uboot_env" mtd3: 00200000 00020000 "nor_bank0_ppa" mtd4: 00300000 00020000 "nor_bank0_secure_boot" mtd5: 00600000 00020000 "nor_bank0_dppa_qe" mtd6: 00100000 00020000 "nor_bank0_dtb" mtd7: 01000000 00020000 "nor_bank0_kernel" mtd8: 02000000 00020000 "nor_bank0_rootfs" mtd9: 00100000 00020000 "nor_bank4_rcw" mtd10: 00200000 00020000 "nor_bank4_uboot" mtd11: 00200000 00020000 "nor_bank4_uboot_env" mtd12: 00100000 00020000 "nor_bank4_ppa" mtd13: 00300000 00020000 "nor_bank4_secure_boot" mtd14: 00600000 00020000 "nor_bank4_dppa_qe" mtd15: 00100000 00020000 "nor_bank4_dtb" mtd16: 01000000 00020000 "nor_bank4_kernel" mtd17: 02000000 00020000 "nor_bank4_rootfs" mtd18: 00100000 00040000 "nand_rcw" mtd19: 00200000 00040000 "nand_uboot" mtd20: 00100000 00040000 "nand_uboot_env" mtd21: 00200000 00040000 "nand_ppa" mtd22: 00300000 00040000 "nand_secure_boot" mtd23: 00600000 00040000 "nand_dppa_qe" mtd24: 00100000 00040000 "nand_dtb" mtd25: 01000000 00040000 "nand_kernel" mtd26: 02000000 00040000 "nand_rootfs" mtd27: 1c000000 00040000 "nand_free" mtd28: 01000000 00010000 "spi0_free" mtd29: 00080000 00001000 "spi1_free" mtd30: 00800000 00001000 "spi2_free" Signed-off-by: Bao Xiaowei <xiaowei.bao(a)nxp.com> --- include/configs/ls1046aqds.h | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 5d2e819..57aed04 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -479,17 +479,23 @@ unsigned long get_board_ddr_clk(void); #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \ "14m(free)" #else -#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:" \ - "2m@0x100000(nor_bank0_uboot),"\ - "40m@0x1100000(nor_bank0_fit)," \ - "7m(nor_bank0_user)," \ - "2m@0x4100000(nor_bank4_uboot)," \ - "40m@0x5100000(nor_bank4_fit),"\ - "-(nor_bank4_user);" \ - "7e800000.flash:" \ - "4m(nand_uboot),36m(nand_kernel)," \ - "472m(nand_free);spi0.0:2m(uboot)," \ - "14m(free)" +#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \ + "2m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \ + "2m(nor_bank0_ppa),3m(nor_bank0_secure_boot)," \ + "6m(nor_bank0_dppa_qe),1m(nor_bank0_dtb)," \ + "16m(nor_bank0_kernel),32m(nor_bank0_rootfs)," \ + "1m(nor_bank4_rcw),2m(nor_bank4_uboot)," \ + "2m(nor_bank4_uboot_env),1m(nor_bank4_ppa)," \ + "3m(nor_bank4_secure_boot),6m(nor_bank4_dppa_qe)," \ + "1m(nor_bank4_dtb),16m(nor_bank4_kernel)," \ + "32m(nor_bank4_rootfs);7e800000.flash:" \ + "1m(nand_rcw),2m(nand_uboot)," \ + "1m(nand_uboot_env),2m(nand_ppa)," \ + "3m(nand_secure_boot),6m(nand_dppa_qe)," \ + "1m(nand_dtb),16m(nand_kernel)," \ + "32m(nand_rootfs),448m(nand_free);" \ + "spi0.0:16m(spi0_free);" \ + "spi0.1:512k(spi1_free);spi0.2:8m(spi2_free)" #endif #include <asm/fsl_secure_boot.h> -- 2.1.0.27.g96db324

3 6

[U-Boot] Pull request, u-boot-tegra/master
by Tom Warren 17 Aug '17

17 Aug '17

Tom, Please pull u-boot-tegra/master into U-Boot/master. Thanks! All Tegra builds are OK, and Stephen's automated test system reports that all tests pass. The following changes since commit 2d3c4ae350fe8c196698681ab9410733bf9017e0: Prepare v2017.09-rc2 (2017-08-14 20:02:11 -0400) are available in the git repository at: git://git.denx.de/u-boot-tegra.git master for you to fetch changes up to 33848eb53e00156bb6bade1955b09d12daeffdc6: apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies (2017-08-15 14:51:18 -0700) ---------------------------------------------------------------- Marcel Ziswiler (4): apalis_t30: fix usb otg power enable dm: tegra: move apalis t30/tk1, colibri t20/t30 to livetree apalis-tk1: remove duplicate hdmi_ddc device tree node apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies arch/arm/dts/tegra124-apalis.dts | 10 +++------- arch/arm/dts/tegra20-colibri.dts | 4 ++-- arch/arm/dts/tegra30-apalis.dts | 6 +++--- arch/arm/dts/tegra30-colibri.dts | 4 ++-- board/toradex/apalis_t30/pinmux-config-apalis_t30.h | 4 ++-- configs/apalis-tk1_defconfig | 4 ++++ configs/apalis_t30_defconfig | 1 + configs/colibri_t20_defconfig | 1 + configs/colibri_t30_defconfig | 1 + 9 files changed, 19 insertions(+), 16 deletions(-)

2 1

[U-Boot] Pull request: u-boot-sunxi/master
by Jagan Teki 17 Aug '17

17 Aug '17

Hi Tom, Please pull this PR. thanks! Jagan. The following changes since commit b24065c4ef21687787a74eef22dfa9232096f965: Merge git://git.denx.de/u-boot-i2c (2017-08-10 07:22:59 -0400) are available in the git repository at: git://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 585bf8ae6f467d85b8e9f17141c8562d96a83c51: sun50i: a64: Add A64-OLinuXino initial support (2017-08-15 11:30:59 +0530) ---------------------------------------------------------------- Clément Bœsch (1): sunxi: reduce Orange Pi Zero DRAM clock speed Emmanuel Vadot (1): ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc Icenowy Zheng (3): sunxi: add PRCM secure switch register definition sunxi: switch PRCM to non-secure on H3/H5 SoCs sunxi: add MACPWR in Orange Pi PC2 defconfig Jagan Teki (3): sun50i: a64: Sync Linux [oe]hci0 nodes sun50i: a64: Add initial NanoPi A64 support sun50i: a64: Add A64-OLinuXino initial support Olliver Schinagl (1): sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC arch/arm/dts/Makefile | 2 + arch/arm/dts/sun50i-a64-nanopi-a64.dts | 115 ++++++++++++++++++++++++ arch/arm/dts/sun50i-a64-olinuxino.dts | 84 +++++++++++++++++ arch/arm/dts/sun50i-a64.dtsi | 22 +++++ arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +- arch/arm/include/asm/arch-sunxi/prcm.h | 6 ++ arch/arm/mach-sunxi/clock_sun6i.c | 6 ++ board/sunxi/MAINTAINERS | 15 ++++ configs/A20-OLinuXino-Lime2-eMMC_defconfig | 36 ++++++++ configs/a64-olinuxino_defconfig | 15 ++++ configs/nanopi_a64_defconfig | 15 ++++ configs/orangepi_pc2_defconfig | 1 + configs/orangepi_zero_defconfig | 2 +- 13 files changed, 319 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/sun50i-a64-nanopi-a64.dts create mode 100644 arch/arm/dts/sun50i-a64-olinuxino.dts create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig create mode 100644 configs/a64-olinuxino_defconfig create mode 100644 configs/nanopi_a64_defconfig

2 1

[U-Boot] Pull request: u-boot-spi/master
by Jagan Teki 17 Aug '17

17 Aug '17

Hi Tom, Please pull this PR. thanks! Jagan. The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5: common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04 20:38:39 -0400) are available in the git repository at: git://git.denx.de/u-boot-spi.git master for you to fetch changes up to 294f2050c438d1e4ab39fd040d394927772048f2: sf: Preserve QE bit when clearing BP# bits for Macronix flash (2017-08-16 18:21:50 +0530) ---------------------------------------------------------------- Bin Meng (2): sf: Add Macronix MX25U6435F device parameters sf: Preserve QE bit when clearing BP# bits for Macronix flash Wenyou.Yang(a)microchip.com (1): mtd: spi: sf_dataflash: Add print message while erase error drivers/mtd/spi/sf_dataflash.c | 10 ++++++++-- drivers/mtd/spi/spi_flash.c | 22 ++++++++++++++++++---- drivers/mtd/spi/spi_flash_ids.c | 1 + 3 files changed, 27 insertions(+), 6 deletions(-)

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 17 Aug '17

17 Aug '17

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414: Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to e872f27a020f353dd334fc025999466adf5ae18c: imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled (2017-08-16 12:43:09 +0200) ---------------------------------------------------------------- Anatolij Gustschin (2): imx6: use SION macro in SDn_CMD mux mode bitfield arguments imx6: clock: correct comment for PLL_VIDEO Breno Lima (2): mx6sabresd: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values mx6sabreauto: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values Lothar Waßmann (1): net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH Peng Fan (7): ARM: i.MX6: exclude the ARM errata from i.MX6 UP system arm: Implement workaround for Cortex-A9 errata 845369 imx: mx6: select ARM_ERRATA_845369 imx: mx6: soc: fix mx6sll settings imx: mx6sx: select OSC as uart's clk parent imx: mx6sl: simplify code using setbits_le32 imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled Stefano Babic (1): mx6: Add support for Phytec pfla02 (NAND) Sébastien Szymanski (2): imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCs imx: imx6ull: correct get_cpu_speed_grade_hz Vagrant Cascadian (1): arm: imx: Enable booting from SATA on wandboard. arch/arm/Kconfig | 3 + arch/arm/cpu/armv7/start.S | 6 + arch/arm/include/asm/arch-mx6/mx6q_pins.h | 8 +- arch/arm/mach-imx/mx6/Kconfig | 22 +++- arch/arm/mach-imx/mx6/clock.c | 2 +- arch/arm/mach-imx/mx6/soc.c | 55 ++++++---- arch/arm/mach-imx/mx7/soc.c | 7 +- board/freescale/mx6sabreauto/mx6sabreauto.c | 4 +- board/freescale/mx6sabresd/mx6sabresd.c | 4 +- board/phytec/pfla02/Kconfig | 12 ++ board/phytec/pfla02/MAINTAINERS | 6 + board/phytec/pfla02/Makefile | 9 ++ board/phytec/pfla02/README | 24 ++++ board/phytec/pfla02/pfla02.c | 698 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ configs/pfla02_defconfig | 50 +++++++++ drivers/net/fec_mxc.c | 9 ++ include/configs/pfla02.h | 179 ++++++++++++++++++++++++++++++ include/configs/wandboard.h | 1 + include/netdev.h | 5 + 19 files changed, 1069 insertions(+), 35 deletions(-) create mode 100644 board/phytec/pfla02/Kconfig create mode 100644 board/phytec/pfla02/MAINTAINERS create mode 100644 board/phytec/pfla02/Makefile create mode 100644 board/phytec/pfla02/README create mode 100644 board/phytec/pfla02/pfla02.c create mode 100644 configs/pfla02_defconfig create mode 100644 include/configs/pfla02.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] [PATCH] serial: ns16550: Enhancements to the RX interrupt buffer support
by Stefan Roese 16 Aug '17

16 Aug '17

This patch changes the RX interrupt buffer support in these ways, mostly suggested by Bin Meng a few weeks ago: - The RX interrupt buffers size is now configurable via Kconfig (default still at 256 bytes) - For NS16550 devices on the PCI bus, the interrupt number will be read from the PCI config space. Please note that this might not result in the correct non-zero interrupt number for this PCI device, as the UART init code is called very early, currently on x86 before the PCI config registers are initialized via U-Boot - If the interrupt number is not provided, the code falls back to the normal polling mode - The RX interrupt generation is disabled in the UART in the remove function While reworking this RX interrupt buffer support, the "default n" is also removed from Kconfig as its not needed as pointed out by Bin Meng. Also, a missing comment for the 'irq' variable is added to the header. Signed-off-by: Stefan Roese <sr(a)denx.de> Cc: Simon Glass <sjg(a)chromium.org> Cc: Bin Meng <bmeng.cn(a)gmail.com> Cc: Tom Rini <trini(a)konsulko.com> --- drivers/serial/Kconfig | 8 +++++++- drivers/serial/ns16550.c | 41 +++++++++++++++++++++++++++++++---------- include/ns16550.h | 2 +- 3 files changed, 39 insertions(+), 12 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a8e997834a..1b19b24f10 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -67,13 +67,19 @@ config DM_SERIAL config SERIAL_IRQ_BUFFER bool "Enable RX interrupt buffer for serial input" depends on DM_SERIAL - default n help Enable RX interrupt buffer support for the serial driver. This enables pasting longer strings, even when the RX FIFO of the UART is not big enough (e.g. 16 bytes on the normal NS16550). +config SERIAL_IRQ_BUFFER_SIZE + int "RX interrupt buffer size" + depends on SERIAL_IRQ_BUFFER + default 256 + help + The size of the RX interrupt buffer + config SPL_DM_SERIAL bool "Enable Driver Model for serial drivers in SPL" depends on DM_SERIAL diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 607a1b8c1d..a24ba75031 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -453,11 +453,13 @@ int ns16550_serial_probe(struct udevice *dev) /* Allocate the RX buffer */ plat->buf = malloc(BUF_COUNT); - /* Install the interrupt handler */ - irq_install_handler(plat->irq, ns16550_handle_irq, dev); + if (plat->irq) { + /* Install the interrupt handler */ + irq_install_handler(plat->irq, ns16550_handle_irq, dev); - /* Enable RX interrupts */ - serial_out(UART_IER_RDI, &com_port->ier); + /* Enable RX interrupts */ + serial_out(UART_IER_RDI, &com_port->ier); + } } #endif @@ -469,9 +471,13 @@ int ns16550_serial_probe(struct udevice *dev) static int ns16550_serial_remove(struct udevice *dev) { #if CONFIG_IS_ENABLED(SERIAL_IRQ_BUFFER) - if (gd->flags & GD_FLG_RELOC) { - struct ns16550_platdata *plat = dev->platdata; + struct ns16550_platdata *plat = dev->platdata; + + if ((gd->flags & GD_FLG_RELOC) && (plat->irq)) { + struct NS16550 *const com_port = dev_get_priv(dev); + /* Disable RX interrupts */ + serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); irq_free_handler(plat->irq); } #endif @@ -504,6 +510,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) struct fdt_pci_addr pci_addr; u32 bar; int ret; + u8 irq; /* we prefer to use a memory-mapped register */ ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev), @@ -524,6 +531,10 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) return ret; addr = bar; + + /* Try to get the PCI interrupt number */ + dm_pci_read_config8(dev, PCI_INTERRUPT_LINE, &irq); + plat->irq = irq; } #endif @@ -562,12 +573,22 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) plat->fcr |= UART_FCR_UME; #if CONFIG_IS_ENABLED(SERIAL_IRQ_BUFFER) - plat->irq = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), - "interrupts", 0); + /* + * If the interrupt is not provided via PCI, read the number from + * the DT instead + */ if (!plat->irq) { - debug("ns16550 interrupt not provided\n"); - return -EINVAL; + plat->irq = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "interrupts", 0); } + + /* + * If no interrupt is provided the RX interrupt buffer code is + * still used, but the interrupt is not enabled and registered. + * The RX buffer code will be usedin polling mode in this case. + */ + if (!plat->irq) + debug("ns16550 interrupt not provided, using polling\n"); #endif return 0; diff --git a/include/ns16550.h b/include/ns16550.h index 7e9944d0d9..15f9899d90 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -52,6 +52,7 @@ * @reg_shift: Shift size of registers (0=byte, 1=16bit, 2=32bit...) * @clock: UART base clock speed in Hz * + * @irq: Interrupt number for this UART * @buf: Pointer to the RX interrupt buffer * @rd_ptr: Read pointer in the RX interrupt buffer * @wr_ptr: Write pointer in the RX interrupt buffer @@ -64,7 +65,6 @@ struct ns16550_platdata { u32 fcr; int irq; - char *buf; int rd_ptr; int wr_ptr; -- 2.14.1

2 4

[U-Boot] [PATCH] rockchip: rk3399-firefly: update gmac parameter
by Kever Yang 16 Aug '17

16 Aug '17

Update the tx_deday and rx_delay to match the timing for rk3399-firefly board to improve the stability of gmac data transfer. Signed-off-by: Kever Yang <kever.yang(a)rock-chips.com> --- arch/arm/dts/rk3399-firefly.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts index 3d3f507..31e3ba8 100644 --- a/arch/arm/dts/rk3399-firefly.dts +++ b/arch/arm/dts/rk3399-firefly.dts @@ -211,8 +211,8 @@ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; + tx_delay = <0x33>; + rx_delay = <0x45>; status = "okay"; }; -- 1.9.1

2 3

[U-Boot] [PATCH] sunxi: defaultly enable SPL for Lichee Pi Zero
by Icenowy Zheng 16 Aug '17

16 Aug '17

As we have already DRAM initialization code for V3s SoC, we can defaultly enable SPL now on Lichee Pi Zero. Add CONFIG_SPL in Lichee Pi Zero defconfig. Signed-off-by: Icenowy Zheng <icenowy(a)aosc.io> --- configs/LicheePi_Zero_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig index 887997bd4f..de90a4c6ce 100644 --- a/configs/LicheePi_Zero_defconfig +++ b/configs/LicheePi_Zero_defconfig @@ -4,7 +4,11 @@ CONFIG_MACH_SUN8I_V3S=y CONFIG_DRAM_CLK=360 CONFIG_DRAM_ZQ=14779 CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero" +CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_NETDEVICES is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set -- 2.13.0

2 2

[U-Boot] [PATCH v2] sun50i: a64: Add A64-OLinuXino initial support
by Jagan Teki 16 Aug '17

16 Aug '17

From: Jagan Teki <jagan(a)amarulasolutions.com> OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Tested-by: Jagan Teki <jagan(a)amarulasolutions.com> Signed-off-by: Jagan Teki <jagan(a)amarulasolutions.com> --- Changes for v2: - Tested on latest - Sync to Linux arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-olinuxino.dts | 84 +++++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 +++ configs/a64-olinuxino_defconfig | 15 +++++++ 4 files changed, 105 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-olinuxino.dts create mode 100644 configs/a64-olinuxino_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8da32d8..21a8103 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -336,6 +336,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-bananapi-m64.dtb \ sun50i-a64-nanopi-a64.dtb \ + sun50i-a64-olinuxino.dtb \ sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts new file mode 100644 index 0000000..7bd4730 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-olinuxino.dts @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki(a)openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Olimex A64-Olinuxino"; + compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 3b8d544..ff6eea2 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -98,6 +98,11 @@ M: Stefan Mavrodiev <stefan.mavrodiev(a)gmail.com> S: Maintained F: configs/A33-OLinuXino_defconfig +A64-OLINUXINO BOARD +M: Jagan Teki <jagan(a)amarulasolutions.com> +S: Maintained +F: configs/a64-olinuxino_defconfig + A80 OPTIMUS BOARD M: Chen-Yu Tsai <wens(a)csie.org> S: Maintained diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig new file mode 100644 index 0000000..14f2c3d --- /dev/null +++ b/configs/a64-olinuxino_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y -- 2.7.4

1 5

[U-Boot] [PATCH 1/2] sf: Add Macronix MX25U6435F device parameters
by Bin Meng 16 Aug '17

16 Aug '17

This adds support for Macronix flash MX25U6435F (device ID 0xc22537). Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- drivers/mtd/spi/spi_flash_ids.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c index edca94e..c4ccf48 100644 --- a/drivers/mtd/spi/spi_flash_ids.c +++ b/drivers/mtd/spi/spi_flash_ids.c @@ -81,6 +81,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25l12805", INFO(0xc22018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) }, {"mx25l25635f", INFO(0xc22019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx25l51235f", INFO(0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, + {"mx25u6435f", INFO(0xc22537, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP) }, {"mx25l12855e", INFO(0xc22618, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, -- 2.9.2

3 23