August 2017 - U-Boot

[U-Boot] [Patch V3] Convert CONFIG_NAND_OMAP_GPMC et al to Kconfig
by Adam Ford 02 Sep '17

02 Sep '17

This converts the following to Kconfig: CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SYS_NAND_BUSWIDTH_16BIT CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE (ARCH_OMAP2PLUS only) Signed-off-by: Adam Ford <aford173(a)gmail.com> V3: Remove selection from CMD_NAND Changes since V1: Rebased on latest Master Fixed a few missing entries where some features lacked dependancies --- configs/am3517_crane_defconfig | 6 ++++-- configs/cm_t3517_defconfig | 1 + configs/cm_t35_defconfig | 1 + configs/omap3_evm_defconfig | 1 + configs/omap3_ha_defconfig | 6 ++++-- configs/tao3530_defconfig | 6 ++++-- configs/tricorder_defconfig | 1 + include/configs/ti_omap3_common.h | 1 - 8 files changed, 16 insertions(+), 7 deletions(-) diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index 396aadd..e7d92b6 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -13,11 +13,11 @@ CONFIG_SYS_PROMPT="AM3517_CRANE # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y @@ -26,6 +26,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index d5550fe..66cdc19 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -37,6 +37,7 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 16f1eab..21bf5c3 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -39,6 +39,7 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 9bbc980..40a91dd 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -45,6 +45,7 @@ CONFIG_SPL_DM=y CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y +CONFIG_NAND=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig index f88c2e1..2884d5a 100644 --- a/configs/omap3_ha_defconfig +++ b/configs/omap3_ha_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -25,6 +25,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index e6c7e60..f8c9596 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -12,11 +12,11 @@ CONFIG_SYS_PROMPT="TAO-3530 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -25,6 +25,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index de42b4d..ad07dbc 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -35,5 +35,6 @@ CONFIG_LED_STATUS_BIT2=4 CONFIG_LED_STATUS_STATE2=2 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 393d867..2373727 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -65,7 +65,6 @@ (64 << 20)) #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_NAND_BASE 0x30000000 #endif -- 2.7.4

2 2

[U-Boot] [PATCH] misc: Kconfig: Add SPL_I2C_EEPROM option
by Wenyou Yang 01 Sep '17

01 Sep '17

This option is an SPL-variant of the I2C_EEPROM option to enable the driver for generic I2C-attached EEPROMs for SPL. Signed-off-by: Wenyou Yang <wenyou.yang(a)microchip.com> --- drivers/misc/Kconfig | 8 ++++++++ drivers/misc/Makefile | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index d1ddbbe157..e441031d04 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -196,4 +196,12 @@ config I2C_EEPROM depends on MISC help Enable a generic driver for EEPROMs attached via I2C. + +config SPL_I2C_EEPROM + bool "Enable driver for generic I2C-attached EEPROMs for SPL" + depends on MISC && SPL && SPL_DM + help + This option is an SPL-variant of the I2C_EEPROM option. + See the help of I2C_EEPROM for details. + endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 10265c8fb4..21f7e6c6f5 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o endif obj-$(CONFIG_FSL_IIM) += fsl_iim.o obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o -obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o +obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o -- 2.13.0

3 2

[U-Boot] Pull request: u-boot-sunxi/master
by Jagan Teki 01 Sep '17

01 Sep '17

Hi Tom, These fixes need to be in for the release, please pull the same. thanks! Jagan. The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409: mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400) are available in the git repository at: git://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to ead3697d7ec491c055fe546b3a45bcfba45fa022: mmc: sunxi: fix legacy MMC initialisation (2017-08-28 22:38:05 +0530) ---------------------------------------------------------------- Jagan Teki (1): sunxi: bpi-m3: Enable eMMC Maxime Ripard (3): mmc: sunxi: Support new mode sunxi: Enable MMC new mode for A83T mmc: sunxi: fix legacy MMC initialisation arch/arm/include/asm/arch-sunxi/clock_sun8i_a83t.h | 1 + arch/arm/include/asm/arch-sunxi/mmc.h | 11 +++++--- arch/arm/mach-sunxi/Kconfig | 1 + configs/Sinovoip_BPI_M3_defconfig | 1 + drivers/mmc/Kconfig | 4 +++ drivers/mmc/sunxi_mmc.c | 29 +++++++++++++++++++--- 6 files changed, 40 insertions(+), 7 deletions(-)

3 2

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 01 Sep '17

01 Sep '17

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 90ae53ce1ae665a1b43ecf5ccafc339839392427: fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long (2017-08-22 08:20:02 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 63af4b0ad0666e0797306593813b6272e1995bde: i.MX6Q: icorem6: Add falcon mode (2017-08-30 12:18:41 +0200) ---------------------------------------------------------------- Anatolij Gustschin (3): imx: timer: don't clear the GPT control register multiple times spl: do not repeat timer init on i.MX6 imx6: don't include unneeded boot_mode array in SPL Breno Lima (1): imx: imx6: Move gpr_init() function to soc.c Jagan Teki (3): icorem6: Fix to find MMC devices i.MX6Q: spl: Fix falcon to use dram_init_banksize i.MX6Q: icorem6: Add falcon mode Peng Fan (3): imx: mx7: psci: add copyright and license pinctrl: imx: Fix mask when SHARE_MUX_CONF_REG is set pinctrl: imx7ulp: Add new info instance for iomuxc1 Stefan Agner (11): imx: move imximage header to common location usb: gadget: add SDP driver usb: gadget: sdp: extend images compatible for jumps cmd: add sdp command spl: add serial download protocol (SDP) support doc: add Serial Download Protocol documentation apalis/colibri_imx6: use independent USB PID for SPL apalis/colibri_imx6: enable SDP by default imx: fix USB boot mode detection for i.MX 6UL and 6ULL imx: use BOOT_DEVICE_BOARD instead of UART imx: remove SATA boot mode for i.MX 6UL and 6ULL Stefano Babic (2): imx: fix licensing in i.MX files pfla02: Fix RAM detection and support 1 bank SOM arch/arm/include/asm/arch-mx35/mmc_host_def.h | 18 +--- arch/arm/include/asm/arch-mx5/iomux-mx51.h | 7 +- arch/arm/include/asm/arch-mxs/iomux-mx23.h | 7 +- arch/arm/include/asm/arch-mxs/iomux-mx28.h | 7 +- arch/arm/include/asm/mach-imx/sys_proto.h | 9 +- arch/arm/mach-imx/mx6/soc.c | 19 ++++ arch/arm/mach-imx/mx7/psci-mx7.c | 7 ++ arch/arm/mach-imx/mx7/psci.S | 7 ++ arch/arm/mach-imx/spl.c | 20 +++- arch/arm/mach-imx/timer.c | 3 +- board/bachmann/ot1200/ot1200.c | 11 -- board/barco/platinum/platinum.h | 11 -- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 11 -- board/el/el6x/el6x.c | 11 -- board/engicam/common/spl.c | 22 ++-- board/freescale/mx6sabreauto/mx6sabreauto.c | 17 --- board/freescale/mx6sabresd/mx6sabresd.c | 17 --- board/gateworks/gw_ventana/gw_ventana_spl.c | 11 -- board/kosagi/novena/novena_spl.c | 11 -- board/liebherr/mccmon6/spl.c | 11 -- board/phytec/pcm058/pcm058.c | 12 --- board/phytec/pfla02/Kconfig | 6 ++ board/phytec/pfla02/pfla02.c | 98 ++++++++++-------- board/solidrun/mx6cuboxi/mx6cuboxi.c | 11 -- board/toradex/apalis_imx6/apalis_imx6.c | 24 +++-- board/toradex/colibri_imx6/colibri_imx6.c | 24 +++-- board/udoo/udoo_spl.c | 11 -- board/wandboard/spl.c | 11 -- cmd/Kconfig | 7 ++ cmd/Makefile | 1 + cmd/usb_gadget_sdp.c | 50 +++++++++ common/spl/Kconfig | 6 ++ common/spl/Makefile | 1 + common/spl/spl.c | 2 +- common/spl/spl_sdp.c | 37 +++++++ configs/apalis_imx6_defconfig | 4 + configs/colibri_imx6_defconfig | 4 + configs/imx6qdl_icore_mmc_defconfig | 2 +- configs/imx6qdl_icore_rqs_defconfig | 1 - doc/README.sdp | 100 ++++++++++++++++++ drivers/pinctrl/nxp/pinctrl-imx.c | 2 +- drivers/pinctrl/nxp/pinctrl-imx7ulp.c | 10 +- drivers/usb/gadget/Kconfig | 7 ++ drivers/usb/gadget/Makefile | 2 + drivers/usb/gadget/f_sdp.c | 737 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/imx6-engicam.h | 14 +++ {tools => include}/imximage.h | 0 include/sdp.h | 16 +++ 48 files changed, 1156 insertions(+), 281 deletions(-) create mode 100644 cmd/usb_gadget_sdp.c create mode 100644 common/spl/spl_sdp.c create mode 100644 doc/README.sdp create mode 100644 drivers/usb/gadget/f_sdp.c rename {tools => include}/imximage.h (100%) create mode 100644 include/sdp.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 1

[U-Boot] Please pull u-boot-marvell/master
by Stefan Roese 01 Sep '17

01 Sep '17

Hi Tom, please pull this last minute fix from Chris, which is needed to get SPI NOR working on current master. Thanks, Stefan The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409: mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-marvell.git for you to fetch changes up to dbc3e64fd1d416395def9b555a9b76e84d6f44f3: ARM: mvebu: add "spi-flash" compatible string (2017-08-30 10:03:35 +0200) ---------------------------------------------------------------- Chris Packham (1): ARM: mvebu: add "spi-flash" compatible string arch/arm/dts/armada-385-amc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

2 1

[U-Boot] [GIT PULL] u-boot-uniphier/master
by Masahiro Yamada 01 Sep '17

01 Sep '17

Hi Tom, Here is a bit volume pull request, but changes are SoC-specific except the ofnode patch and denali_dt. The latter is reviewed by Simon. - add {ofnode,dev}_read_resource_byname - provide DT probe hook to Denali NAND driver - update clk/reset driver - update DT - misc cleanups The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409: mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400) are available in the git repository at: git://git.denx.de/u-boot-uniphier.git master for you to fetch changes up to 0cc0c544bc317548885721d2312c90185642f98c: ARM: uniphier: enable Denali NAND driver for 64bit SoCs (2017-08-30 09:07:04 +0900) ---------------------------------------------------------------- Dai Okamura (1): ARM: uniphier: fix DSPLL init code for LD20 SoC Masahiro Yamada (16): ofnode: add {ofnode, dev}_read_resource_byname() mtd: nand: denali_dt: add a DT driver ARM: uniphier: replace <common.h> with <linux/delay.h> in pll settings ARM: uniphier: move PLLCTRL register macros to each SoC .c file ARM: uniphier: add PLL settings for PXs3 ARM: uniphier: remove unneeded NAND config options ARM: uniphier: enable CONFIG_NAND_DENALI_DT ARM: uniphier: remove ad-hoc pin settings for NAND clk: uniphier: add System clock support reset: uniphier: fix compatible for SD reset node for LD11/LD20 reset: uniphier: add PXs3 support ARM: dts: uniphier: sync with Linux ARM: dts: uniphier: update PXs3 SoC/board DT ARM: uniphier: move CONFIG_NAND to defconfig ARM: uniphier: set system bus pinmux for PXs3 ARM: uniphier: enable Denali NAND driver for 64bit SoCs arch/arm/dts/uniphier-ld11-global.dts | 6 +- arch/arm/dts/uniphier-ld11-ref.dts | 6 +- arch/arm/dts/uniphier-ld11.dtsi | 13 ++- arch/arm/dts/uniphier-ld20-global.dts | 6 +- arch/arm/dts/uniphier-ld20-ref.dts | 6 +- arch/arm/dts/uniphier-ld20.dtsi | 15 ++- arch/arm/dts/uniphier-ld4-ref.dts | 6 +- arch/arm/dts/uniphier-ld4.dtsi | 11 +- arch/arm/dts/uniphier-ld6b-ref.dts | 6 +- arch/arm/dts/uniphier-ld6b.dtsi | 2 +- arch/arm/dts/uniphier-pinctrl.dtsi | 5 + arch/arm/dts/uniphier-pro4-ace.dts | 2 +- arch/arm/dts/uniphier-pro4-ref.dts | 6 +- arch/arm/dts/uniphier-pro4-sanji.dts | 2 +- arch/arm/dts/uniphier-pro4.dtsi | 9 +- arch/arm/dts/uniphier-pro5-4kbox.dts | 4 +- arch/arm/dts/uniphier-pro5.dtsi | 13 ++- arch/arm/dts/uniphier-pxs2-gentil.dts | 2 +- arch/arm/dts/uniphier-pxs2-vodka.dts | 2 +- arch/arm/dts/uniphier-pxs2.dtsi | 13 ++- arch/arm/dts/uniphier-pxs3-ref.dts | 29 ++++- arch/arm/dts/uniphier-pxs3.dtsi | 163 +++++++++++++++++++-------- arch/arm/dts/uniphier-sld8-ref.dts | 6 +- arch/arm/dts/uniphier-sld8.dtsi | 11 +- arch/arm/mach-uniphier/Kconfig | 1 - arch/arm/mach-uniphier/board_init.c | 28 +---- arch/arm/mach-uniphier/clk/pll-base-ld20.c | 6 +- arch/arm/mach-uniphier/clk/pll-ld11.c | 13 ++- arch/arm/mach-uniphier/clk/pll-ld20.c | 21 +++- arch/arm/mach-uniphier/clk/pll-pxs3.c | 55 +++++++++ arch/arm/mach-uniphier/sbc/sbc-pxs2.c | 2 + arch/arm/mach-uniphier/sc64-regs.h | 21 ---- configs/uniphier_ld4_sld8_defconfig | 2 + configs/uniphier_pro4_defconfig | 2 + configs/uniphier_pxs2_ld6b_defconfig | 2 + configs/uniphier_v8_defconfig | 5 + drivers/clk/uniphier/Makefile | 1 + drivers/clk/uniphier/clk-uniphier-core.c | 30 +++++ drivers/clk/uniphier/clk-uniphier-sys.c | 34 ++++++ drivers/clk/uniphier/clk-uniphier.h | 2 + drivers/core/ofnode.c | 12 ++ drivers/core/read.c | 6 + drivers/mtd/nand/Kconfig | 7 ++ drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/denali.c | 4 +- drivers/mtd/nand/denali.h | 2 + drivers/mtd/nand/denali_dt.c | 68 +++++++++++ drivers/reset/reset-uniphier.c | 29 ++++- include/configs/uniphier.h | 3 - include/dm/ofnode.h | 2 + include/dm/read.h | 20 +++- 51 files changed, 554 insertions(+), 169 deletions(-) create mode 100644 drivers/clk/uniphier/clk-uniphier-sys.c create mode 100644 drivers/mtd/nand/denali_dt.c -- Best Regards Masahiro Yamada

2 1

[U-Boot] [PATCH 0/2] Board for QEMU's '-machine virt' on ARM
by Tuomas Tynkkynen 01 Sep '17

01 Sep '17

Hi, Sending this out in a slightly unfinished state to gauge if there's interest in having this included in U-Boot. Basically this allows running U-Boot under QEMU's '-machine virt' emulation, thus making it possible to boot Linux distros that use the extlinux.conf booting method under '-machine virt'. To some extent, this is currently possible by emulating and running U-Boot on some of the Versatile boards, but (IIRC) they have some limitations like limiting to 1GB of RAM or lacking support for PCI. Tuomas Tynkkynen (2): PCI: Add driver for a 'pci-host-ecam-generic' host controller ARM: Add a new arch + board for QEMU's 'virt' machine arch/arm/Kconfig | 10 +++ arch/arm/mach-qemu/Kconfig | 9 ++ board/qemu-arm/Makefile | 5 ++ board/qemu-arm/qemu-arm.c | 35 ++++++++ configs/qemu_arm_defconfig | 27 ++++++ drivers/pci/Kconfig | 8 ++ drivers/pci/Makefile | 1 + drivers/pci/pcie_ecam_generic.c | 193 ++++++++++++++++++++++++++++++++++++++++ include/configs/qemu-arm.h | 63 +++++++++++++ 9 files changed, 351 insertions(+) create mode 100644 arch/arm/mach-qemu/Kconfig create mode 100644 board/qemu-arm/Makefile create mode 100644 board/qemu-arm/qemu-arm.c create mode 100644 configs/qemu_arm_defconfig create mode 100644 drivers/pci/pcie_ecam_generic.c create mode 100644 include/configs/qemu-arm.h -- 2.13.0

5 9

[U-Boot] [PATCH v3] rpi: Enable USB keyboard support
by Simon Glass 01 Sep '17

01 Sep '17

This is currently disabled, so USB keyboards are not detected in U-Boot. Enable this option to fix that. Signed-off-by: Simon Glass <sjg(a)chromium.org> Tested-by: Jonathan Gray <jsg(a)jsg.id.au> Reviewed-by: Bin Meng <bmeng.cn(a)gmail.com> Tested-by: Paul Barker <pbarker(a)toganlabs.com> --- Changes in v3: - Add missing review/test tags Changes in v2: - Fix U_Boot typo configs/rpi_2_defconfig | 1 + configs/rpi_3_32b_defconfig | 1 + configs/rpi_3_defconfig | 1 + configs/rpi_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 63d1e4042d..5150eed79c 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -15,6 +15,7 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 343cb197a1..caceb85b07 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 6c9f2e32b5..e3dd1b9124 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 6b3cec5ce0..eaf9bb9189 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -15,6 +15,7 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y -- 2.14.1.342.g6490525c54-goog

3 4

[U-Boot] [PATCH] sunxi: Change SUNXI_GMAC to SUN7I_GMAC in sources
by Lionel Koenig 01 Sep '17

01 Sep '17

Hi, I found that in commit-id 4d43d065db3262f9a9918ba72457bf36dfb8e0bb was changing SUNXI_GMAC config to SUN7I_GMAC. However, after that change, the PHY was not initialized correctly on my board (Olimex Olinuxino-A20-Lime2-eMMC). This patch should correct the behavior. However, beeing my first patch to u-boot, I wouldn't mind few other pair of eyes. Kind regards, Lionel -- Lionel Koenig

3 5

[U-Boot] DA850evm SPI Flash Partitions between Linux and U-boot are Inconsistent
by Adam Ford 01 Sep '17

01 Sep '17

I was trying to enable MTD Partitions to make loading the Kernel and FS easier from within U-Boot The da850evm spi-flash partitions in Linux show "U-Boot-SPL" @ offset 0, size 64K "U-Boot"; @ offset 0x00010000, size 512K "U-Boot-Env"; @ offset 0x00090000 However U-Boot shows the following: CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 which would make the SPL partition 32K. CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 and the size of U-boot 256K instead of 512k. CONFIG_ENV_SIZE (64 << 10) CONFIG_ENV_OFFSET (512 << 10) which is 0x80000 instead of Linux's 0x90000 It seems to me like the U-Boot and Linux should try and synchronize their partitions tables. For people who want to burn Linux into the SPI flash it seems there there should be some consistency. I tried making the U-boot settings match the Linux ones, but it seems to hang between SPL and U-Boot, so I think the U-Boot offset in Linux might need to match U-Boot. Can you guys make some recomendations as to which is correct? adam

2 9