May 2017 - U-Boot

[U-Boot] [PATCH 0/10] x86: Add generic VESA video driver
by Simon Glass 01 Aug '19

01 Aug '19

This series introduces a generic VESA video driver and adjusts the generic PCI ROM support to support it. It also fixes up some problems which prevent this from working on PowerPC at present. It is now possible to use VESA graphics: - On PowerPC, using the x86 emulator - On x86, using either the x86 emulator or native code execution As it turns out, on the only platform I have tested (link), the x86 emulator is only slightly slower that native code execution (200ms difference). Still, we may as well leave this feature in there. VGA ROMs are a very old technology but they are still used by modern platforms, including at least link and some Atom designs. Simon Glass (10): bios_emulator: Fix an #ifdef typo in the header file x86: Correct endianness isues in pci_rom x86: Support ROMs on other archs bios_emulator: Don't display error when emulator terminates bios_emulator: Add some VESA interface debugging x86: pci: Don't stop when we get a vendor/device mismatch x86: Add a VESA video driver x86: Drop the x86_fb driver x86: Access the VGA ROM when needed RFC: Test code for glacier PCI video support arch/x86/include/asm/u-boot-x86.h | 2 + drivers/bios_emulator/atibios.c | 161 +++++++++++++++++++++++---- drivers/bios_emulator/include/x86emu/debug.h | 2 +- drivers/bios_emulator/x86emu/ops.c | 2 +- drivers/pci/pci_auto.c | 28 ++++- drivers/pci/pci_rom.c | 40 ++++--- drivers/video/Makefile | 2 +- drivers/video/vesa_fb.c | 64 +++++++++++ drivers/video/x86_fb.c | 38 ------- include/configs/canyonlands.h | 31 ++++++ include/configs/chromebook_link.h | 2 +- include/pci.h | 9 ++ include/pci_rom.h | 1 - include/vbe.h | 9 +- 14 files changed, 312 insertions(+), 79 deletions(-) create mode 100644 drivers/video/vesa_fb.c delete mode 100644 drivers/video/x86_fb.c -- 2.2.0.rc0.207.ga3a616c

3 42

[U-Boot] [PATCH V3 01/10] disk: support host devices in dev_print()
by Stephen Warren 18 May '19

18 May '19

Add a case statement for IF_TYPE_HOST in dev_print() so that it prints the device type rather than the "device type unknown" message. Signed-off-by: Stephen Warren <swarren(a)wwwdotorg.org> --- disk/part.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/disk/part.c b/disk/part.c index 43485c9148b0..4e72257434b6 100644 --- a/disk/part.c +++ b/disk/part.c @@ -179,6 +179,9 @@ void dev_print (block_dev_desc_t *dev_desc) case IF_TYPE_DOC: puts("device type DOC\n"); return; + case IF_TYPE_HOST: + puts("host device\n"); + break; case IF_TYPE_UNKNOWN: puts("device type unknown\n"); return; -- 1.9.1

2 13

[U-Boot] [PATCH 1/2] usb: gadget: fastboot: Request status and length check in rx handler
by Paul Kocialkowski 18 Mar '19

18 Mar '19

This avoids handling requests that have an error status or no data. In particular, this avoids showing unnecessary error messages when the USB gadget gets disconnected (e.g. with fastboot continue) and the fastboot USB gadget driver sends an error back to the host (that has disconnected already). Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> --- drivers/usb/gadget/f_fastboot.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 206b6d1..b9a9099 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -635,6 +635,9 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) void (*func_cb)(struct usb_ep *ep, struct usb_request *req) = NULL; int i; + if (req->status != 0 || req->length == 0) + return; + for (i = 0; i < ARRAY_SIZE(cmd_dispatch_info); i++) { if (!strcmp_l1(cmd_dispatch_info[i].cmd, cmdbuf)) { func_cb = cmd_dispatch_info[i].cb; @@ -656,9 +659,7 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } } - if (req->status == 0) { - *cmdbuf = '\0'; - req->actual = 0; - usb_ep_queue(ep, req, 0); - } + *cmdbuf = '\0'; + req->actual = 0; + usb_ep_queue(ep, req, 0); } -- 1.9.1

4 15

[U-Boot] [PATCH v2 0/4] ARM: atmel: boards: enable SPL support
by Bo Shen 22 Feb '19

22 Feb '19

This patch series enable SPL support for following boards: - at91sam9m10g45ek - NAND flash boot support - SD card boot support - at91sam9n12ek - NAND flash boot support - SPI flash boot support - at91sam9x5ek - NAND flash boot support - SPI flash boot support Changes in v2: - Remove the meaningless prefix "+S:" in configuration file. Bo Shen (4): ARM: atmel: arm926ejs: fix clock configuration ARM: atmel: at91sam9m10g45ek: enable spl support ARM: atmel: at91sam9x5ek: enable spl support ARM: atmel: at91sam9n12ek: enable spl support arch/arm/mach-at91/Kconfig | 3 + arch/arm/mach-at91/Makefile | 2 + arch/arm/mach-at91/arm926ejs/clock.c | 54 +++++++++-------- arch/arm/mach-at91/arm926ejs/u-boot-spl.lds | 48 +++++++++++++++ arch/arm/mach-at91/include/mach/at91_pmc.h | 6 +- arch/arm/mach-at91/include/mach/at91sam9x5.h | 10 ++++ arch/arm/mach-at91/mpddrc.c | 3 +- arch/arm/mach-at91/spl.c | 2 +- arch/arm/mach-at91/spl_at91.c | 11 +++- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 80 +++++++++++++++++++++++++ board/atmel/at91sam9n12ek/at91sam9n12ek.c | 73 ++++++++++++++++++++++ board/atmel/at91sam9x5ek/at91sam9x5ek.c | 74 +++++++++++++++++++++++ configs/at91sam9m10g45ek_mmc_defconfig | 1 + configs/at91sam9m10g45ek_nandflash_defconfig | 1 + configs/at91sam9n12ek_nandflash_defconfig | 1 + configs/at91sam9n12ek_spiflash_defconfig | 1 + configs/at91sam9x5ek_nandflash_defconfig | 1 + configs/at91sam9x5ek_spiflash_defconfig | 1 + include/configs/at91sam9m10g45ek.h | 58 ++++++++++++++++++ include/configs/at91sam9n12ek.h | 58 +++++++++++++++++- include/configs/at91sam9x5ek.h | 57 ++++++++++++++++++ 21 files changed, 513 insertions(+), 32 deletions(-) create mode 100644 arch/arm/mach-at91/arm926ejs/u-boot-spl.lds -- 2.3.3.220.g9ab698f

4 14

[U-Boot] [PATCH 0/8] efi_loader: Support loading from El Torito isos
by Alexander Graf 14 Aug '18

14 Aug '18

Some distributions still provide .iso files for installation media. To give us greatest flexibility, this patch set adds support for El Torito booting with EFI payloads. Please consider for 2016.05 still. Thanks, Alex Alexander Graf (8): iso: Make little endian and 64bit safe iso: Start with partition 1 iso: Allow 512 byte sector size efi_loader: Split drive add into function efi_loader: Add el torito support efi_loader: Pass file path to payload efi_loader: Increase path string to 32 characters distro: Enable iso partition code cmd/bootefi.c | 48 +++++++++++++--- cmd/fs.c | 3 +- disk/part_iso.c | 50 +++++++++++----- disk/part_iso.h | 40 ++++++------- include/config_distro_defaults.h | 1 + include/efi_api.h | 2 +- include/efi_loader.h | 5 +- lib/efi_loader/efi_disk.c | 121 +++++++++++++++++++++++++++------------ 8 files changed, 187 insertions(+), 83 deletions(-) -- 1.8.5.6

4 19

[U-Boot] [PATCH] xyz-modem: Change getc timeout loop waiting
by Tomas Melin 02 Aug '18

02 Aug '18

This fixes the loop delay when using a hw watchdog. In case a watchdog is used that accesses CPU registers, the defined delay of 20us in a tight loop will cause a huge delay in the actual timeout seen. This is caused by the fact that udelay will inheritantly call WATCHDOG_RESET. Together with the omap wdt implementation, the seen timeout increases up to around 30s. This makes the loop very slow and causes long delays when using the modem. Instead, implement the 2 sec loop by using the timer interface to know when to break out of the timeout loop. Watchdog kicking is taken care of by getc(). Signed-off-by: Tomas Melin <tomas.melin(a)vaisala.com> --- common/xyzModem.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/common/xyzModem.c b/common/xyzModem.c index 5656aac..e0d87db 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -71,12 +71,12 @@ typedef int cyg_int32; static int CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) { -#define DELAY 20 - unsigned long counter = 0; - while (!tstc () && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY)) + + ulong now = get_timer(0); + while (!tstc ()) { - udelay (DELAY); - counter++; + if (get_timer(now) > xyzModem_CHAR_TIMEOUT) + break; } if (tstc ()) { -- 2.1.4

3 6

[U-Boot] [PATCH v3 00/10] driver model bring-up of musb on AM335x GP and BBB
by Mugunthan V N 26 Mar '18

26 Mar '18

This patch series enables musb driver to adopt driver model. This has been tested on the following evms (logs [1]) by loading kernel and dtbs from usb mass storage (host) and usb rndis mode (device). * AM335x GP evm * AM335x BBB Also pushed a branch for testing [2] This patch series depends on the following patch series * usb ether gadget DM conversion [4] Changes from v2: * Removed from non-useful error logs. * Since defconfig is merged into single defconfig for all TI AM335x platforms, rebased those patches as well. Changes from initial version: * Separated out the usb gadget driver patches from earlier musb series [3] for testing and submitting of dwc3 dm musb patches. * passed an dummy dev pointer for non-DM case as well for reducing the number of #ifdefs in musb backend driver. [1] - http://pastebin.ubuntu.com/23489333/ [2] - git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-musb-v3 [3] - http://lists.denx.de/pipermail/u-boot/2016-February/246827.html [4] - http://lists.denx.de/pipermail/u-boot/2016-November/273037.html Note: ~~~~~ The following checkpatch warning can be ignore as splitting the line will break grep during debug session. WARNING: line over 80 characters #224: FILE: drivers/usb/musb-new/ti-musb.c:232: + error("musb - not able to bind usb host node\n"); total: 0 errors, 1 warnings, 0 checks, 207 lines checked NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE PREFER_ETHER_ADDR_COPY USLEEP_RANGE ../dm-musb/patches/musb/v3.00/0006-drivers-usb-musb-add-ti-musb-host-driver-with-driver.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. WARNING: line over 80 characters #164: FILE: drivers/usb/musb-new/ti-musb.c:332: + error("musb - not able to bind usb device node\n"); total: 0 errors, 1 warnings, 0 checks, 139 lines checked NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE PREFER_ETHER_ADDR_COPY USLEEP_RANGE ../dm-musb/patches/musb/v3.00/0007-drivers-usb-musb-add-ti-musb-peripheral-driver-with-.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. total: 0 errors, 0 warnings, 0 checks, 14 lines checked Mugunthan V N (10): configs: am335x: usb: do not define CONFIG_DM_USB for spl am33xx: board: do not register usb devices when CONFIG_DM_USB is defined drivers: usb: musb: add ti musb misc driver for wrapper am33xx: board: probe misc drivers to register musb devices drivers: usb: musb: adopt musb backend driver to driver model drivers: usb: musb: add ti musb host driver with driver model support drivers: usb: musb: add ti musb peripheral driver with driver model support am33xx: board: init usb ether gadget for rndis support am335x_evm: enable usb ether gadget as it supports DM_ETH defconfig: am335x_evm: enable usb driver model arch/arm/cpu/armv7/am33xx/board.c | 24 ++- arch/arm/cpu/armv7/omap3/am35x_musb.c | 6 +- arch/arm/include/asm/arch-omap3/musb.h | 6 +- arch/arm/include/asm/omap_musb.h | 7 +- configs/am335x_evm_defconfig | 3 + drivers/usb/musb-new/Kconfig | 9 + drivers/usb/musb-new/Makefile | 1 + drivers/usb/musb-new/am35x.c | 14 +- drivers/usb/musb-new/musb_dsps.c | 8 +- drivers/usb/musb-new/musb_uboot.c | 2 + drivers/usb/musb-new/ti-musb.c | 364 +++++++++++++++++++++++++++++++++ include/configs/am335x_evm.h | 4 +- 12 files changed, 422 insertions(+), 26 deletions(-) create mode 100644 drivers/usb/musb-new/ti-musb.c -- 2.11.0.rc1

5 25

[U-Boot] [PATCH] arm: imx6: configure NoC on i.MX6DQP
by Filip Brozovic 20 Mar '18

20 Mar '18

The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Signed-off-by: Filip Brozovic <fbrozovic(a)gmail.com> --- arch/arm/cpu/armv7/mx6/ddr.c | 69 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/mx6-ddr.h | 19 +++++++++ 2 files changed, 88 insertions(+) diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7beb7ea..60bfd08 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -1181,6 +1181,8 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, { volatile struct mmdc_p_regs *mmdc0; volatile struct mmdc_p_regs *mmdc1; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u8 soc_boot_cfg3 = ((readl(&src_regs->sbmr1) & 0xff0000) >> 16) & 0xff; u32 val; u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd; u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl; @@ -1473,6 +1475,73 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, /* Step 12: Configure and activate periodic refresh */ mmdc0->mdref = (sysinfo->refsel << 14) | (sysinfo->refr << 11); + /* + * i.MX6DQP only: If the NoC scheduler is enabled, + * configure it and disable MMDC arbitration/reordering (see EB828) + */ + if (is_mx6dqp() && ((soc_boot_cfg3 & 0x30) == 0x00 || + (soc_boot_cfg3 & 0x33) == 0x31)) { + struct mx6dqp_noc_sched_regs *noc_sched = + (struct mx6dqp_noc_sched_regs *)MX6DQP_NOC_SCHED_BASE; + + /* These values are fixed based on integration parameters and + * should not be modified */ + noc_sched->rlat = 0x00000040; + noc_sched->ipu1 = 0x00000020; + noc_sched->ipu2 = 0x00000020; + + noc_sched->activate = (1 << 10) | /* FawBank */ + (tfaw << 4) | + (trrd << 0); + noc_sched->ddrtiming = (((sysinfo->dsize == 1) ? 1 : 0) << 31) | + ((tcwl + twtr) << 26) | + ((tcl - tcwl + 2) << 21) | + (4 << 18) | /* Burst Length = 8 */ + ((tcwl + twr + trp + trcd) << 12) | + ((trtp + trp + trcd - 4) << 6) | + (trc << 0); + + if (sysinfo->dsize == 2) { + if (ddr3_cfg->coladdr == 10) { + if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 4; + else + noc_sched->ddrconf = 0; + } else if (ddr3_cfg->coladdr == 11) { + noc_sched->ddrconf = 1; + } + } else { + if (ddr3_cfg->coladdr == 9) { + if (ddr3_cfg->rowaddr == 13) + noc_sched->ddrconf = 2; + else if (ddr3_cfg->rowaddr == 14) + noc_sched->ddrconf = 15; + } else if (ddr3_cfg->coladdr == 10) { + if (ddr3_cfg->rowaddr == 14 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 14; + else if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 9; + else + noc_sched->ddrconf = 3; + } else if (ddr3_cfg->coladdr == 11) { + if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 4; + else + noc_sched->ddrconf = 0; + } else if (ddr3_cfg->coladdr == 12) { + if (ddr3_cfg->rowaddr == 14) + noc_sched->ddrconf = 1; + } + } + + /* Disable MMDC arbitration/reordering */ + mmdc0->maarcr = 0x14420000; + } + /* Step 13: Deassert config request - init complete */ mmdc0->mdscr = 0x00000000; diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index 9922409..c881782 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -307,6 +307,25 @@ struct mx6dq_iomux_grp_regs { u32 grp_b6ds; }; +/* + * NoC scheduler registers - only on IMX6DQP + */ +#define MX6DQP_NOC_SCHED_BASE 0x00bb0000 +struct mx6dqp_noc_sched_regs { + u32 coreid; + u32 revid; + u32 ddrconf; + u32 ddrtiming; + u32 ddrmode; + u32 rlat; + u32 res1[4]; + u32 ipu1; + u32 ipu2; + u32 res2[2]; + u32 activate; + u32 res3[16]; +}; + #define MX6SDL_IOM_DDR_BASE 0x020e0400 struct mx6sdl_iomux_ddr_regs { u32 res1[25]; -- 2.1.4

3 2

[U-Boot] [PATCH 00/10] mips: bmips: add SPI support
by Álvaro Fernández Rojas 26 Jan '18

26 Jan '18

BCM63xx SPI controller is a bit tricky since it doesn't allow keeping CS active between transfers, so I had to modify the spi_flash driver in order to allow limiting reads. Álvaro Fernández Rojas (10): drivers: spi: allow limiting reads drivers: spi: add config to consider command bytes when writting to flash dm: spi: add BCM63xx SPI driver mips: bmips: add bcm63xx-spi driver support for BCM6338 mips: bmips: add bcm63xx-spi driver support for BCM6348 mips: bmips: add bcm63xx-spi driver support for BCM6358 mips: bmips: add bcm63xx-spi driver support for BCM3380 mips: bmips: add bcm63xx-spi driver support for BCM63268 mips: bmips: enable the SPI flash on the Sagem F@ST1704 mips: bmips: enable the SPI flash on the Netgear CG3100D arch/mips/dts/brcm,bcm3380.dtsi | 13 ++ arch/mips/dts/brcm,bcm63268.dtsi | 13 ++ arch/mips/dts/brcm,bcm6338.dtsi | 13 ++ arch/mips/dts/brcm,bcm6348.dtsi | 13 ++ arch/mips/dts/brcm,bcm6358.dtsi | 13 ++ arch/mips/dts/netgear,cg3100d.dts | 13 ++ arch/mips/dts/sagem,f(a)st1704.dts | 13 ++ configs/netgear_cg3100d_ram_defconfig | 8 + configs/sagem_f@st1704_ram_defconfig | 8 + drivers/mtd/spi/spi_flash.c | 5 +- drivers/spi/Kconfig | 26 +++ drivers/spi/Makefile | 1 + drivers/spi/bcm63xx_spi.c | 404 ++++++++++++++++++++++++++++++++++ include/spi.h | 11 +- 14 files changed, 552 insertions(+), 2 deletions(-) create mode 100644 drivers/spi/bcm63xx_spi.c -- 2.1.4

4 186

[U-Boot] [PATCH] travis-ci: Add qemu-x86_64 target
by Tom Rini 23 Jan '18

23 Jan '18

Add qemu-x86_64 to the list of targets we use for test.py runs. Signed-off-by: Tom Rini <trini(a)konsulko.com> --- .travis.yml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/.travis.yml b/.travis.yml index 48b7b101f1c6..dab55f34e51d 100644 --- a/.travis.yml +++ b/.travis.yml @@ -311,6 +311,13 @@ matrix: TOOLCHAIN="x86_64" BUILD_ROM="yes" - env: + - TEST_PY_BD="qemu-x86_64" + TEST_PY_TEST_SPEC="not sleep" + QEMU_TARGET="x86_64-softmmu" + BUILDMAN="^qemu-x86_64$" + TOOLCHAIN="x86_64" + BUILD_ROM="yes" + - env: - TEST_PY_BD="zynq_zc702" TEST_PY_TEST_SPEC="not sleep" QEMU_TARGET="arm-softmmu" -- 1.9.1

1 2