May 2016 - U-Boot

[U-Boot] [PATCH] tools/env: check that redundant environments have equal size
by Andreas Fenkart 31 May '16

31 May '16

For double buffering to work, the target buffer must always be big enough to hold all data. This can only be ensured if buffers are of equal size, otherwise one must be smaller and we risk data loss when copying from the bigger to the smaller. Signed-off-by: Andreas Fenkart <andreas.fenkart(a)digitalstrom.com> --- tools/env/fw_env.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 06cf63d..60a7394 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -1373,12 +1373,21 @@ static int parse_config () return -1; } - if (HaveRedundEnv && stat (DEVNAME (1), &st)) { - fprintf (stderr, - "Cannot access MTD device %s: %s\n", - DEVNAME (1), strerror (errno)); - return -1; + if (HaveRedundEnv) { + if (stat(DEVNAME(1), &st)) { + fprintf(stderr, + "Cannot access MTD device %s: %s\n", + DEVNAME(1), strerror(errno)); + return -1; + } + + if (ENVSIZE(0) != ENVSIZE(1)) { + fprintf(stderr, + "Redundant environments are not of equal size"); + return -1; + } } + return 0; } -- 2.8.1

3 3

[U-Boot] [PATCH] dm: gpio: MPC85XX GPIO platform data support
by Hamish Martin 31 May '16

31 May '16

Define a platform data structure for the MPC85XX GPIO driver to allow use of the driver without device tree. Users should define the GPIO blocks for their platform like this: struct mpc85xx_gpio_plat gpio_blocks[] = { { .addr = 0x130000, .ngpios = 32, }, { .addr = 0x131000, .ngpios = 32, }, }; U_BOOT_DEVICES(my_platform_gpios) = { { "gpio_mpc85xx", &gpio_blocks[0] }, { "gpio_mpc85xx", &gpio_blocks[1] }, }; This is intended to build upon the recent submission of the base MPC85XX driver from Mario Six. We need to use that new driver without dts support and this patch gives us that flexibility. This has been tested on a Freescale T2080 CPU, although only the first GPIO block. Signed-off-by: Hamish Martin <hamish.martin(a)alliedtelesis.co.nz> Reviewed-by: Mario Six <mario.six(a)gdsys.cc> Tested-by: Mario Six <mario.six(a)gdsys.cc> --- arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 6 +++++ drivers/gpio/mpc85xx_gpio.c | 36 ++++++++++++++++++++++------ 2 files changed, 35 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h index 41b6677bba38..76faa22c8b43 100644 --- a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h +++ b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h @@ -18,4 +18,10 @@ #include <asm/mpc85xx_gpio.h> #endif +struct mpc85xx_gpio_plat { + ulong addr; + unsigned long size; + uint ngpios; +}; + #endif diff --git a/drivers/gpio/mpc85xx_gpio.c b/drivers/gpio/mpc85xx_gpio.c index 04773e2b31c3..c4563bee4d84 100644 --- a/drivers/gpio/mpc85xx_gpio.c +++ b/drivers/gpio/mpc85xx_gpio.c @@ -163,23 +163,41 @@ static int mpc85xx_gpio_get_function(struct udevice *dev, unsigned gpio) return dir ? GPIOF_OUTPUT : GPIOF_INPUT; } +#if CONFIG_IS_ENABLED(OF_CONTROL) static int mpc85xx_gpio_ofdata_to_platdata(struct udevice *dev) { - struct mpc85xx_gpio_data *data = dev_get_priv(dev); + struct mpc85xx_gpio_plat *plat = dev_get_platdata(dev) fdt_addr_t addr; fdt_size_t size; addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, dev->of_offset, "reg", 0, &size); - data->addr = addr; - data->base = map_sysmem(CONFIG_SYS_IMMR + addr, size); + plat->addr = addr; + plat->size = size; + plat->ngpios = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "ngpios", 32); - if (!data->base) + return 0; +} +#endif + +static int mpc85xx_gpio_platdata_to_priv(struct udevice *dev) +{ + struct mpc85xx_gpio_data *priv = dev_get_priv(dev); + struct mpc85xx_gpio_plat *plat = dev_get_platdata(dev); + unsigned long size = plat->size; + + if (size == 0) + size = 0x100; + + priv->addr = plat->addr; + priv->base = map_sysmem(CONFIG_SYS_IMMR + plat->addr, size); + + if (!priv->base) return -ENOMEM; - data->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset, - "ngpios", 32); - data->dat_shadow = 0; + priv->gpio_count = plat->ngpios; + priv->dat_shadow = 0; return 0; } @@ -190,6 +208,8 @@ static int mpc85xx_gpio_probe(struct udevice *dev) struct mpc85xx_gpio_data *data = dev_get_priv(dev); char name[32], *str; + mpc85xx_gpio_platdata_to_priv(dev); + snprintf(name, sizeof(name), "MPC@%lx_", data->addr); str = strdup(name); @@ -221,8 +241,10 @@ U_BOOT_DRIVER(gpio_mpc85xx) = { .name = "gpio_mpc85xx", .id = UCLASS_GPIO, .ops = &gpio_mpc85xx_ops, +#if CONFIG_IS_ENABLED(OF_CONTROL) .ofdata_to_platdata = mpc85xx_gpio_ofdata_to_platdata, .of_match = mpc85xx_gpio_ids, +#endif .probe = mpc85xx_gpio_probe, .priv_auto_alloc_size = sizeof(struct mpc85xx_gpio_data), }; -- 2.8.3

2 1

[U-Boot] [PATCH] clearfog: add HUSH parser
by Peter Robinson 31 May '16

31 May '16

In the big move of CONFIG_HUSH_PARSER to config files the clearfog somehow missed out. Signed-off-by: Peter Robinson <pbrobinson(a)gmail.com> --- configs/clearfog_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 0fde640..75ea200 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CLEARFOG=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" +CONFIG_HUSH_PARSER=y CONFIG_SPL=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -- 2.7.4

2 1

[U-Boot] [PATCH 1/3] arm: spear: x600: Add support for Micrel KSZ9031 PHY
by Stefan Roese 31 May '16

31 May '16

As the old ethernet PHY is not available any more, the x600 board has been redesigned with the Micrel KSZ9031 PHY. This patch adds support to autodetect the PHY and configure the Micrel PHY correctly. Signed-off-by: Stefan Roese <sr(a)denx.de> --- board/spear/x600/x600.c | 80 ++++++++++++++++++++++++++++++++++++------------- include/configs/x600.h | 2 ++ 2 files changed, 61 insertions(+), 21 deletions(-) diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c index b8edfcd..f8e9fdd 100644 --- a/board/spear/x600/x600.c +++ b/board/spear/x600/x600.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <micrel.h> #include <nand.h> #include <netdev.h> #include <phy.h> @@ -69,27 +70,64 @@ void board_nand_init(void) int board_phy_config(struct phy_device *phydev) { - /* Extended PHY control 1, select GMII */ - phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020); - - /* Software reset necessary after GMII mode selction */ - phy_reset(phydev); - - /* Enable extended page register access */ - phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001); - - /* 17e: Enhanced LED behavior, needs to be written twice */ - phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); - phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); - - /* 16e: Enhanced LED method select */ - phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea); - - /* Disable extended page register access */ - phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); - - /* Enable clock output pin */ - phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049); + unsigned short id1, id2; + + /* check whether KSZ9031 or AR8035 has to be configured */ + id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2); + id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3); + + if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) { + /* PHY configuration for Micrel KSZ9031 */ + printf("PHY KSZ9031 detected - "); + + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, 0x1c00); + + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x0000); + /* gtx and rx clock pad skew - devaddr = 0x02, reg = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, + 0x03FF); + } else { + /* PHY configuration for Vitesse VSC8641 */ + printf("PHY VSC8641 detected - "); + + /* Extended PHY control 1, select GMII */ + phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020); + + /* Software reset necessary after GMII mode selction */ + phy_reset(phydev); + + /* Enable extended page register access */ + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001); + + /* 17e: Enhanced LED behavior, needs to be written twice */ + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); + + /* 16e: Enhanced LED method select */ + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea); + + /* Disable extended page register access */ + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); + + /* Enable clock output pin */ + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049); + } if (phydev->drv->config) phydev->drv->config(phydev); diff --git a/include/configs/x600.h b/include/configs/x600.h index d7da0b2..160b2c5 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -80,6 +80,8 @@ #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9031 #define CONFIG_SPEAR_GPIO -- 2.8.1

1 4

[U-Boot] Broken H3 EMAC Driver
by Amit Tomer 31 May '16

31 May '16

Hello, Trying to add support for H3 EMAC driver. http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/261544 It was working well until commit " b733c278d7adc48c71bd06faf359db3d9e385185" was introduced. net: phy: Handle phy_startup() error codes properly - genphy_update_link(phydev); - genphy_parse_link(phydev); + int ret; - return 0; + ret = genphy_update_link(phydev); + if (ret) + return ret; H3 based SoC's has an internal PHY which is different from having on board external PHY and its operations doesn't depends upon the success of normal PHY auto negotiation(Driver works well even if there is a PHY auto negotiation TIMEOUT). Please, let me know if it is worth reverting particular part of this patch in order to make H3 EMAC driver work. Thanks, Amit.

2 1

[U-Boot] u-boot 2016.07-rc0 does not seem to compile for me
by Pavel Machek 30 May '16

30 May '16

I did the following to fix it up. It still might be problem with some of my local changes, but you might want to test compile. Thanks, Pavel diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c index 6a0e971..197c4ee 100644 --- a/drivers/mmc/socfpga_dw_mmc.c +++ b/drivers/mmc/socfpga_dw_mmc.c @@ -108,7 +108,7 @@ static int socfpga_dwmmc_probe(struct udevice *dev) return ret; upriv->mmc = host->mmc; - host->mmc->dev = dev; + // host->mmc->dev = dev; return 0; } -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

4 4

[U-Boot] [PATCH] check u-boot SPL size to avoid producing non-working images
by Pavel Machek 30 May '16

30 May '16

Debugging SPL is hard, and if SPL is too big, it tends to crash in mysterious ways. (I'm not sure what the exact threshold is, 49762 bytes works, 52426 bytes does not, so 50000 should be good value). Signed-off-by: Pavel Machek <pavel(a)denx.de> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 6d2017d..504f0d2 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -237,6 +237,7 @@ endif MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE + @if test `stat -c%s $(obj)/$(SPL_BIN).bin` -gt 50000; then echo `stat -c%s $(obj)/$(SPL_BIN).bin` is too big, it probably will not work; exit 1; fi $(call if_changed,mkimage) quiet_cmd_mksunxiboot = MKSUNXI $@ -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

3 3

[U-Boot] [PATCH v3 00/15] Support for boot image creation for TI secure devices
by Daniel Allred 30 May '16

30 May '16

Adds support for creating bootable images for AM43xx HS and DRA7xx/AM57xx HS devices. Daniel Allred (9): doc: Add info on using secure devices from TI ti: omap-common: Add commands for generating secure SPL images ti: AM43xx: config.mk: Add support for generating secure boot images ti_omap5_common: Update SPL start address on secure parts spl: build: ti: add support for secure boot images ARM: omap-common: Add device type to CPU string ARM: omap5: add hooks for cpu/SoC fdt fixups ARM: omap5: add ft_board_setup for dra7xx/am57xx defconfig: ti: Add configs for OMAP5-class secure parts Madan Srinivas (6): arm: am33xx: Kconfig: Add secure device definitions arm: Kconfig: Add support for AM43xx SoC specific Kconfig ti: omap-common: Add Kconfig file for secure device support ti: AM43xx: Use CONFIG options from SOC Kconfig ti: AM43xx: board: Detect AM43xx HS EVM defconfig: Add a config for AM43xx secure part arch/arm/Kconfig | 23 +-- arch/arm/cpu/armv7/am33xx/Kconfig | 40 ++++++ arch/arm/cpu/armv7/am33xx/config.mk | 20 +++ arch/arm/cpu/armv7/omap-common/Kconfig | 17 +++ arch/arm/cpu/armv7/omap-common/config_secure.mk | 66 +++++++++ arch/arm/cpu/armv7/omap-common/hwinit-common.c | 22 ++- arch/arm/cpu/armv7/omap5/Makefile | 1 + arch/arm/cpu/armv7/omap5/config.mk | 6 + arch/arm/cpu/armv7/omap5/fdt.c | 184 ++++++++++++++++++++++++ arch/arm/include/asm/arch-omap3/cpu.h | 7 +- arch/arm/include/asm/omap_common.h | 11 ++ board/ti/am43xx/board.c | 4 +- board/ti/am43xx/board.h | 14 +- board/ti/am43xx/mux.c | 2 +- board/ti/am57xx/board.c | 9 ++ board/ti/dra7xx/evm.c | 9 ++ configs/am437x_gp_evm_defconfig | 1 + configs/am437x_hs_evm_defconfig | 53 +++++++ configs/am437x_sk_evm_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_qspiboot_defconfig | 2 + configs/am43xx_evm_usbhost_boot_defconfig | 2 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 36 +++++ configs/dra72_evm_defconfig | 1 + configs/dra72_hs_evm_defconfig | 55 +++++++ configs/dra74_evm_defconfig | 1 + configs/dra74_hs_evm_defconfig | 54 +++++++ doc/README.ti-secure | 91 ++++++++++++ include/configs/am43xx_evm.h | 23 ++- include/configs/ti_omap5_common.h | 32 ++++- 32 files changed, 747 insertions(+), 43 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/Kconfig create mode 100644 arch/arm/cpu/armv7/omap-common/Kconfig create mode 100644 arch/arm/cpu/armv7/omap-common/config_secure.mk create mode 100644 arch/arm/cpu/armv7/omap5/fdt.c create mode 100644 configs/am437x_hs_evm_defconfig create mode 100644 configs/am57xx_hs_evm_defconfig create mode 100644 configs/dra72_hs_evm_defconfig create mode 100644 configs/dra74_hs_evm_defconfig create mode 100644 doc/README.ti-secure -- 1.9.1

2 32

[U-Boot] [PATCH] Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUP
by Robert P. J. Day 30 May '16

30 May '16

Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT: config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" depends on OF_LIBFDT ... remove superfluous tests of CONFIG_OF_LIBFDT when testing for CONFIG_OF_BOARD_SETUP. Signed-off-by: Robert P. J. Day <rpjday(a)crashcourse.ca> --- i just got annoyed looking at that pair of tests and wondering why they were both there. feel free to sanity check while i fix myself another martini. oh, and another trivial fixup or two just to keep things aesthetically consistent. diff --git a/arch/nios2/cpu/fdt.c b/arch/nios2/cpu/fdt.c index 79f72aa..a44f51a 100644 --- a/arch/nios2/cpu/fdt.c +++ b/arch/nios2/cpu/fdt.c @@ -12,7 +12,7 @@ #include <common.h> -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP #include <libfdt.h> #include <fdt_support.h> @@ -35,4 +35,4 @@ void ft_cpu_setup(void *blob, bd_t *bd) */ fdt_fixup_ethernet(blob); } -#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/arch/powerpc/cpu/mpc5xxx/cpu.c b/arch/powerpc/cpu/mpc5xxx/cpu.c index 7a463b5..84fabbd 100644 --- a/arch/powerpc/cpu/mpc5xxx/cpu.c +++ b/arch/powerpc/cpu/mpc5xxx/cpu.c @@ -96,7 +96,7 @@ unsigned long get_tbclk (void) /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP void ft_cpu_setup(void *blob, bd_t *bd) { int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4; @@ -117,7 +117,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) do_fixup_by_path(blob, eth_path, "mac-address", enetaddr, 6, 0); do_fixup_by_path(blob, eth_path, "local-mac-address", enetaddr, 6, 0); #endif -#if defined(CONFIG_OF_IDE_FIXUP) +#ifdef CONFIG_OF_IDE_FIXUP if (!ide_device_present(0)) { /* NO CF card detected -> delete ata node in DTS */ int nodeoffset = 0; @@ -132,10 +132,10 @@ void ft_cpu_setup(void *blob, bd_t *bd) } } -#endif +#endif /* CONFIG_OF_IDE_FIXUP */ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } -#endif +#endif /* CONFIG_OF_BOARD_SETUP */ #ifdef CONFIG_MPC5xxx_FEC /* Default initializations for FEC controllers. To override, diff --git a/arch/powerpc/cpu/mpc8260/cpu.c b/arch/powerpc/cpu/mpc8260/cpu.c index 6eed6f5..9f2be3c 100644 --- a/arch/powerpc/cpu/mpc8260/cpu.c +++ b/arch/powerpc/cpu/mpc8260/cpu.c @@ -284,7 +284,7 @@ void watchdog_reset (void) #endif /* CONFIG_WATCHDOG */ /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP void ft_cpu_setup (void *blob, bd_t *bd) { #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ @@ -303,7 +303,7 @@ void ft_cpu_setup (void *blob, bd_t *bd) "clock-frequency", bd->bi_intfreq, 1); fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } -#endif /* CONFIG_OF_LIBFDT */ +#endif /* CONFIG_OF_BOARD_SETUP */ /* * Initializes on-chip ethernet controllers. diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c index eef9c5a..c73509b 100644 --- a/arch/powerpc/cpu/ppc4xx/fdt.c +++ b/arch/powerpc/cpu/ppc4xx/fdt.c @@ -11,7 +11,7 @@ #include <asm/cache.h> #include <asm/ppc4xx.h> -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP #include <libfdt.h> #include <fdt_support.h> #include <asm/4xx_pcie.h> @@ -160,4 +160,4 @@ void ft_cpu_setup(void *blob, bd_t *bd) */ fdt_pcie_setup(blob); } -#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index ee1681b..55d0bc8 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -391,14 +391,14 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ #ifdef CONFIG_SPL_OS_BOOT /* diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index c5d161b..20d8b80 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -170,14 +170,14 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif +#endif /* CONFIG_OF_BOARD_SETUP */ int board_eth_init(bd_t *bis) { diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index c5cc4ff..dc2e3ba 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -489,7 +489,7 @@ int misc_init_r(void) } #endif /* !defined(CONFIG_ARCHES) */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP extern int __ft_board_setup(void *blob, bd_t *bd); int ft_board_setup(void *blob, bd_t *bd) @@ -518,4 +518,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 5276907..fce998d 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -237,7 +237,7 @@ static void compose_hostname(hw_id_t hw_id, char *buf) } -#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +#ifdef CONFIG_OF_BOARD_SETUP /* * Update 'model' and 'memory' properties in the blob according to the module * that we are running on. @@ -255,7 +255,7 @@ static void ft_blob_update(void *blob, bd_t *bd) printf("ft_blob_update(): cannot set /model property err:%s\n", fdt_strerror(ret)); } -#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ +#endif /* CONFIG_OF_BOARD_SETUP */ /* @@ -358,7 +358,7 @@ int last_stage_init(void) #endif /* CONFIG_LAST_STAGE_INIT */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); @@ -366,4 +366,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index a15a9ed..1b6c40f 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -106,11 +106,11 @@ int checkboard (void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index ca9a944..c510ab1 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -471,7 +471,7 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -493,4 +493,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index cda1d7b..656f0fa 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -198,11 +198,11 @@ int checkboard(void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c index 24e4977..31ac728 100644 --- a/board/esd/pmc405de/pmc405de.c +++ b/board/esd/pmc405de/pmc405de.c @@ -300,7 +300,7 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -322,7 +322,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ #if defined(CONFIG_SYS_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 7e35c19..0d43505 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -882,7 +882,7 @@ int board_usb_cleanup(int index, enum usb_init_type init) } #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { int rc; @@ -903,4 +903,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 40bd55d..7c44282 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -274,11 +274,11 @@ int checkboard (void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 3b7c82b..e2eeef3 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -738,7 +738,7 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP static int ft_sethdmiinfmt(void *blob, char *mode) { @@ -939,7 +939,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ static struct mxc_serial_platdata ventana_mxc_serial_plat = { .reg = (struct mxc_uart *)UART2_BASE, diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index 8d01d8b..2d7d789 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -203,7 +203,7 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP extern void __ft_board_setup(void *blob, bd_t *bd); int ft_board_setup(void *blob, bd_t *bd) @@ -218,4 +218,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c index 72932ca..75bf1bb 100644 --- a/board/ifm/ac14xx/ac14xx.c +++ b/board/ifm/ac14xx/ac14xx.c @@ -607,11 +607,11 @@ int checkboard(void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c index ca09767..4fc6809 100644 --- a/board/ifm/o2dnt2/o2dnt2.c +++ b/board/ifm/o2dnt2/o2dnt2.c @@ -303,7 +303,7 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP #if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) static void ft_adapt_flash_base(void *blob) { @@ -383,4 +383,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c index 4ab7160..2e52d51 100644 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ b/board/intercontrol/digsy_mtc/digsy_mtc.c @@ -378,7 +378,7 @@ void ide_set_reset(int idereset) #endif /* CONFIG_IDE_RESET */ #endif /* CONFIG_CMD_IDE */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP static void ft_delete_node(void *fdt, const char *compat) { int off = -1; @@ -481,4 +481,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c index 2078f53..2e62355 100644 --- a/board/ipek01/ipek01.c +++ b/board/ipek01/ipek01.c @@ -195,7 +195,7 @@ void pci_init_board (void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); @@ -203,7 +203,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ int board_eth_init(bd_t *bis) { diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index 8856393..d56902b 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -282,11 +282,11 @@ void ide_set_reset (int idereset) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index 4d0ebaa..dc237c1 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -184,14 +184,14 @@ int checkboard(void) } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ #if defined(CONFIG_STATUS_LED) diff --git a/board/munices/munices.c b/board/munices/munices.c index 23d0f56..8f292ea 100644 --- a/board/munices/munices.c +++ b/board/munices/munices.c @@ -145,11 +145,11 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif +#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index 81f3024..d91d427 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -429,7 +429,7 @@ int checkboard (void) return 0; } -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP #ifdef CONFIG_FDT_FIXUP_PARTITIONS struct node_info nodes[] = { { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, }, @@ -529,7 +529,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ /* * If argument is NULL, set the LCD brightness to the diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c index ed41de1..8a9de0d 100644 --- a/board/phytec/pcm030/pcm030.c +++ b/board/phytec/pcm030/pcm030.c @@ -163,14 +163,14 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ #if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 953a43f..6c26343 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -217,7 +217,7 @@ int board_early_init_r (void) } #endif /* CONFIG_BOARD_EARLY_INIT_R */ -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdefi CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { u32 val[12]; @@ -253,7 +253,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#endif /* CONFIG_OF_BOARD_SETUP */ #define DEFAULT_BRIGHTNESS 25 #define BACKLIGHT_ENABLE (1 << 31) diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 9e8ad93..1de7df0 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -131,7 +131,7 @@ u32 spl_boot_device(void) } #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { int lpae; @@ -273,4 +273,4 @@ void ft_board_setup_ex(void *blob, bd_t *bd) ddr3_check_ecc_int(KS2_DDR3A_EMIF_CTRL_BASE); } -#endif +#endif /* CONFIG_OF_BOARD_SETUP */ -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================

2 1

[U-Boot] Please pull u-boot-dm
by Simon Glass 30 May '16

30 May '16

Hi Tom, This improves the driver-model block support in MMC, brings in a mailbox uclass and fixes/improves a few minor things in the rockchip support. The following changes since commit 6523dbf7cce8d8c903346f756e0e41e46ce6d6b9: Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-25 20:22:48 -0400) are available in the git repository at: git://git.denx.de/u-boot-dm.git for you to fetch changes up to 3c27b6ad540828c44a62d209030df5ba86896df0: dm: rockchip: Enable CONFIG_BLK (2016-05-27 10:23:10 -0600) ---------------------------------------------------------------- Simon Glass (20): arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info tiny-printf: Tidy up a few nits tiny-printf: Support snprintf() reset: Drop the reset failure message mmc: Drop mmc_register() mmc: Drop dead mmc code for non-generic MMC mmc: Use byte array for multipliers rockchip: Check image name for the rksd image rockchip: Drop unnecessary SPL properties rockchip: video: Flush the cache when the display is updated rockchip: Drop SPL GPIO support for rk3288 dm: env: mmc: Convert env_mmc to support CONFIG_BLK dm: mmc: Convert sdhci to support CONFIG_BLK dm: efi: Update for CONFIG_BLK dm: mmc: spl: Add support for CONFIG_BLK dm: mmc: dwmmc: Support CONFIG_BLK dm: rockchip: mmc: Allow use of CONFIG_BLK dm: mmc: Fix up mmc_bread/bwrite() prototypes for SPL dm: mmc: Use cfg directly in mmc_bind() dm: rockchip: Enable CONFIG_BLK Stephen Warren (5): dm: allow setting driver_data before/during bind sunxi: gpio: convert bind() to use driver data Rename reset to sysreset Add a mailbox driver framework/uclass mailbox: implement a sandbox test arch/arm/lib/Makefile | 2 +- arch/arm/mach-rockchip/Kconfig | 3 ++ arch/arm/mach-rockchip/rk3036/reset_rk3036.c | 20 ++++----- arch/arm/mach-rockchip/rk3288/reset_rk3288.c | 20 ++++----- arch/arm/mach-snapdragon/reset.c | 18 ++++---- arch/sandbox/cpu/state.c | 4 +- arch/sandbox/dts/test.dts | 11 +++++ arch/sandbox/include/asm/mbox.h | 21 +++++++++ arch/sandbox/include/asm/state.h | 6 +-- cmd/mmc.c | 62 ------------------------- common/env_mmc.c | 8 ++-- common/spl/spl_mmc.c | 9 ++-- configs/chromebook_jerry_defconfig | 2 +- configs/dragonboard410c_defconfig | 2 +- configs/evb-rk3036_defconfig | 2 +- configs/firefly-rk3288_defconfig | 4 +- configs/kylin-rk3036_defconfig | 2 +- configs/rock2_defconfig | 2 +- configs/sandbox_defconfig | 5 ++- configs/sandbox_noblk_defconfig | 2 +- doc/device-tree-bindings/mailbox/mailbox.txt | 32 +++++++++++++ doc/driver-model/README.txt | 23 ++++++---- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/clk/clk_rk3036.c | 2 +- drivers/clk/clk_rk3288.c | 2 +- drivers/core/device.c | 25 +++++++++-- drivers/core/lists.c | 4 +- drivers/gpio/sunxi_gpio.c | 90 ++++++++++++++++++++----------------- drivers/mailbox/Kconfig | 20 +++++++++ drivers/mailbox/Makefile | 7 +++ drivers/mailbox/mailbox-uclass.c | 145 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mailbox/sandbox-mbox-test.c | 54 ++++++++++++++++++++++ drivers/mailbox/sandbox-mbox.c | 104 ++++++++++++++++++++++++++++++++++++++++++ drivers/misc/Kconfig | 10 ++--- drivers/misc/Makefile | 4 +- drivers/misc/reset_sandbox.c | 100 ----------------------------------------- drivers/misc/{reset-uclass.c => sysreset-uclass.c} | 32 ++++++------- drivers/misc/sysreset_sandbox.c | 101 +++++++++++++++++++++++++++++++++++++++++ drivers/mmc/dw_mmc.c | 42 +++++++++++------ drivers/mmc/mmc.c | 13 +----- drivers/mmc/mmc_private.h | 14 ++++++ drivers/mmc/rockchip_dw_mmc.c | 31 +++++++++++++ drivers/mmc/sdhci.c | 2 +- drivers/video/rockchip/rk_vop.c | 1 + include/configs/rk3288_common.h | 1 - include/configs/rpi.h | 1 + include/dm/device-internal.h | 24 ++++++++++ include/dm/uclass-id.h | 3 +- include/dwmmc.h | 7 ++- include/efi_loader.h | 2 +- include/mailbox_client.h | 149 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/mailbox_uclass.h | 83 ++++++++++++++++++++++++++++++++++ include/mmc.h | 5 --- include/reset.h | 71 ----------------------------- include/sysreset.h | 71 +++++++++++++++++++++++++++++ lib/efi_loader/efi_disk.c | 61 ++++++++++++++++++------- lib/tiny-printf.c | 43 +++++++++++++----- test/dm/Makefile | 3 +- test/dm/mailbox.c | 31 +++++++++++++ test/dm/reset.c | 74 ------------------------------ test/dm/sysreset.c | 74 ++++++++++++++++++++++++++++++ tools/rkimage.c | 7 +-- 63 files changed, 1270 insertions(+), 506 deletions(-) create mode 100644 arch/sandbox/include/asm/mbox.h create mode 100644 doc/device-tree-bindings/mailbox/mailbox.txt create mode 100644 drivers/mailbox/Kconfig create mode 100644 drivers/mailbox/Makefile create mode 100644 drivers/mailbox/mailbox-uclass.c create mode 100644 drivers/mailbox/sandbox-mbox-test.c create mode 100644 drivers/mailbox/sandbox-mbox.c delete mode 100644 drivers/misc/reset_sandbox.c rename drivers/misc/{reset-uclass.c => sysreset-uclass.c} (55%) create mode 100644 drivers/misc/sysreset_sandbox.c create mode 100644 include/mailbox_client.h create mode 100644 include/mailbox_uclass.h delete mode 100644 include/reset.h create mode 100644 include/sysreset.h create mode 100644 test/dm/mailbox.c delete mode 100644 test/dm/reset.c create mode 100644 test/dm/sysreset.c Regards, Simon

2 1