February 2016 - U-Boot

[U-Boot] Regarding revert of "Simplify RAM size detection" patch
by Sam Protsenko 10 Feb '16

10 Feb '16

Hi guys, I see that "Simplify RAM size detection" patch is reverted now. It was breaking boot on DRA7XX EVM as well. But I think I found the actual bug in that patch. This line (from patch): - for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { + for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { is changing loop condition to "cnt >= 0". And once cnt is 0, loop continue iterating, turning into forever loop. To fix this one can add "break" line here: for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { addr = base + cnt; /* pointer arith! */ sync(); save[i] = *addr; sync(); if (cnt) { i++; *addr = ~cnt; } else { *addr = 0; + break; } So if someone is going to rework it and push again -- this note can be helpful.

2 1

[U-Boot] [PATCH] common/memsize.c: fix endless loop when saving
by Eddy Petrișor 10 Feb '16

10 Feb '16

When cnt reaches 0, any shift operation will keep cnt=0, so the condition `cnt >= 0` doesn't make sense. To fix this endless loop, we drop the useless condition and simply break the loop when cnt reaches 0. Signed-off-by: Eddy Petrișor <eddy.petrisor(a)nxp.com> --- common/memsize.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/common/memsize.c b/common/memsize.c index 5c0d279..a6af993 100644 --- a/common/memsize.c +++ b/common/memsize.c @@ -33,7 +33,7 @@ long get_ram_size(long *base, long maxsize) long size; int i = 0; - for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { + for (cnt = (maxsize / sizeof(long)) >> 1; ; cnt >>= 1) { addr = base + cnt; /* pointer arith! */ sync(); save[i] = *addr; @@ -43,6 +43,7 @@ long get_ram_size(long *base, long maxsize) *addr = ~cnt; } else { *addr = 0; + break; } } -- 1.9.2.459.g68773ac

3 5

[U-Boot] Regarding revert of "Simplify RAM size detection" patch
by Sam Protsenko 10 Feb '16

10 Feb '16

Hi guys, I see that "Simplify RAM size detection" patch is reverted now. It was breaking boot on DRA7XX EVM as well. But I think I found the actual bug in that patch. This line (from patch): - for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { + for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { is changing loop condition to "cnt >= 0". And once cnt is 0, loop continue iterating, turning into forever loop. To fix this one can add "break" line here: for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { addr = base + cnt; /* pointer arith! */ sync(); save[i] = *addr; sync(); if (cnt) { i++; *addr = ~cnt; } else { *addr = 0; + break; } So if someone is going to rework it and push again -- this note can be helpful.

1 0

[U-Boot] [PATCH v5 00/32] mtd: Add SPI-NOR core support
by Jagan Teki 10 Feb '16

10 Feb '16

Compared to previous patch series this series adds spi-nor core with spi-nor controller drivers are of "mtd uclass" Why this framework: Some of the SPI device drivers at drivers/spi not a real spi controllers, Unlike normal/generic SPI controllers they operates only with SPI-NOR flash devices. these were technically termed as SPI-NOR controllers, Ex: drivers/spi/fsl_qspi.c The problem with these were resides at drivers/spi is entire SPI layer becomes SPI-NOR flash oriented which is absolutely a wrong indication where SPI layer getting effected more with flash operations - So this SPI-NOR core will resolve this issue by separating all SPI-NOR flash operations from spi layer and creats a generic layer called SPI-NOR core which can be used to interact SPI-NOR to SPI driver interface layer and the SPI-NOR controller driver. The idea is taken from Linux spi-nor framework. Before SPI-NOR: ----------------------- cmd/sf.c ----------------------- spi_flash.c ----------------------- sf_probe.c ----------------------- spi-uclass ----------------------- spi drivers ----------------------- SPI NOR chip ----------------------- After SPI-NOR: ------------------------------ cmd/sf.c ------------------------------ spi-nor.c ------------------------------- m25p80.c spi nor drivers ------------------------------- spi-uclass SPI NOR chip ------------------------------- spi drivers ------------------------------- SPI NOR chip ------------------------------- SPI-NOR with MTD: ------------------------------ cmd/sf.c ------------------------------ MTD core ------------------------------ spi-nor.c ------------------------------- m25p80.c spi nor drivers ------------------------------- spi-uclass SPI NOR chip ------------------------------- spi drivers ------------------------------- SPI NOR chip ------------------------------- drivers/mtd/spi-nor/spi-nor.c: spi-nor core drivers/mtd/spi-nor/m25p80.c: mtd uclass driver which is an interface layer b/w spi-nor core drivers/spi drivers/mtd/spi-nor/fsl_qspi.c: spi-nor controller driver(mtd uclass) Changes for v5: - newly designed changes Testing: $ git clone git://git.denx.de/u-boot-spi.git $ cd u-boot-spi $ git checkout -b spi-nor origin/spi-nor Jagan Teki (32): mtd: Add m25p80 driver mtd: Add Kconfig entry for MTD_M25P80 mtd: Add SPI-NOR core support doc: device-tree-bindings: jedec,spi-nor mtd: spi-nor: Add Kconfig entry for MTD_SPI_NOR mtd: spi-nor: Add kconfig for MTD_SPI_NOR_USE_4K_SECTORS mtd: spi-nor: Add MTD support mtd: spi-nor: Add spi_nor support in m25p80 mtd: spi-nor: Add dm spi-nor probing mtd: spi-nor: Add spi_flash_probe for mtd-dm-spi-nor cmd: sf: Add mtd_info for mtd-dm-spi-nor code mtd: spi-nor: m25p80: Add spi_nor support for non-dm spi_flash: Use mtd_info operation for non-dm mtd: spi-nor: Move spi_read_then_write to spi layer spi: Rename spi_read_then_write to spi_write_then_read spi: Drop mode_rx spi: Drop SPI_RX_FAST mtd: spi-nor: Rename SPI_FLASH_BAR to SPI_NOR_BAR mtd: spi-nor: Add Kconfig entry for SPI_NOR_BAR mtd: spi-nor: Copy spl files from drivers/mtd/spi mtd: spi-nor: spl: Follow ascending order of include headers mtd: spi-nor: fsl_espi_spl: Use mtd_info mtd: spi-nor: spi_spl_load: Use mtd_info mtd: spi-nor: Add flash vendor Kconfig entries arm: zynq: Kconfig: Select MTD uclass arm: zynq: Kconfig: Drop DM_SPI_FLASH defconfigs: zynq_microzed: Drop CONFIG_SPI_FLASH defconfig: zynq_microzed: Enable CONFIG_MTD_M25P80 defconfig: zynq_microzed: Enable CONFIG_MTD_SPI_NOR spl: Add CONFIG_SPL_SPI_NOR_SUPPORT configs: zynq: Use CONFIG_SPL_SPI_NOR_SUPPORT configs: zynq: Use CONFIG_SPL_MTD_SUPPORT Makefile | 1 + arch/arm/Kconfig | 2 +- cmd/sf.c | 38 +- configs/zynq_microzed_defconfig | 3 +- doc/device-tree-bindings/mtd/jedec,spi-nor.txt | 78 ++ drivers/Makefile | 1 + drivers/mtd/Kconfig | 2 + drivers/mtd/spi-nor/Kconfig | 99 ++ drivers/mtd/spi-nor/Makefile | 18 + drivers/mtd/spi-nor/fsl_espi_spl.c | 90 ++ drivers/mtd/spi-nor/m25p80.c | 332 +++++++ drivers/mtd/spi-nor/spi-nor-ids.c | 276 ++++++ drivers/mtd/spi-nor/spi-nor-probe.c | 45 + drivers/mtd/spi-nor/spi-nor.c | 1141 ++++++++++++++++++++++++ drivers/mtd/spi-nor/spi_spl_load.c | 89 ++ drivers/spi/ich.c | 6 +- drivers/spi/spi-uclass.c | 35 +- drivers/spi/spi.c | 24 + drivers/spi/ti_qspi.c | 6 +- include/configs/zynq-common.h | 3 +- include/linux/err.h | 5 + include/linux/mtd/spi-nor.h | 251 ++++++ include/spi.h | 33 +- include/spi_flash.h | 79 +- 24 files changed, 2581 insertions(+), 76 deletions(-) create mode 100644 doc/device-tree-bindings/mtd/jedec,spi-nor.txt create mode 100644 drivers/mtd/spi-nor/Kconfig create mode 100644 drivers/mtd/spi-nor/Makefile create mode 100644 drivers/mtd/spi-nor/fsl_espi_spl.c create mode 100644 drivers/mtd/spi-nor/m25p80.c create mode 100644 drivers/mtd/spi-nor/spi-nor-ids.c create mode 100644 drivers/mtd/spi-nor/spi-nor-probe.c create mode 100644 drivers/mtd/spi-nor/spi-nor.c create mode 100644 drivers/mtd/spi-nor/spi_spl_load.c create mode 100644 include/linux/mtd/spi-nor.h -- 1.9.1

1 32

[U-Boot] [PATCH] Makefile: remove BUILD_TAG from KBUILD_CFLAGS
by Stephen Warren 10 Feb '16

10 Feb '16

From: Stephen Warren <swarren(a)nvidia.com> If BUILD_TAG is part of KBUILD_CFLAGS, then any time the value changes, all files get rebuilt. In a continuous integration environment, the value will change every build. This wastes time assuming that incremental builds would otherwise occur. To solve this, remove BUILD_TAG from KBUILD_FLAGS and add it to the end of "local version". This has other advantages too: - The special case for BUILD_TAG in display_options.c can be removed. - The version printed by the "version" command exactly matches what is printed at boot. Old sign-on message: U-Boot 2016.03-rc1-00044-g4085db5e767b (Feb ...), Build: bar-bas New sign-on message: U-Boot 2016.03-rc1-00044-g4085db5e767b-bar-baz (Feb ...) Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- Makefile | 4 ---- lib/display_options.c | 4 ---- scripts/setlocalversion | 4 ++++ 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/Makefile b/Makefile index 42fad45afee1..2265b8995a7b 100644 --- a/Makefile +++ b/Makefile @@ -562,10 +562,6 @@ else KBUILD_CFLAGS += -O2 endif -ifdef BUILD_TAG -KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' -endif - KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) diff --git a/lib/display_options.c b/lib/display_options.c index 29343fc00e3f..5dcdf4e429af 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -15,11 +15,7 @@ int display_options (void) { -#if defined(BUILD_TAG) - printf ("\n\n%s, Build: %s\n\n", version_string, BUILD_TAG); -#else printf ("\n\n%s\n\n", version_string); -#endif return 0; } diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 63d91e22ed7c..4ef6603b5c27 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -171,4 +171,8 @@ else fi fi +if test -n "${BUILD_TAG}"; then + res="$res-${BUILD_TAG}" +fi + echo "$res" -- 2.7.0

4 8

[U-Boot] Using old Config Style
by Mario Albrecht 10 Feb '16

10 Feb '16

Hi, i have a small question about using old board specific config files. I have a config file for a board which contains all needed commands defined by #define CONFIG_CMD_ and #undef CONFIG_CMD_. In new u-boot Version a autoconf.h file is generated which conflicts the defines in the board.h file. How can I disable autoconf.h generation or get the right commands in this file. Regards Mario

1 0

[U-Boot] [PATCH] Revert "common/memsize.c: Simplify RAM size detection"
by Hans de Goede 10 Feb '16

10 Feb '16

This commit breaks bootup on sunxi boards, the get stuck when running the main u-boot binary at: CPU: Allwinner H3 (SUN8I) I2C: ready DRAM: This reverts commit 8e7cba048baae68ee0916a8f52b4304277328d5e. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- common/memsize.c | 47 ++++++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/common/memsize.c b/common/memsize.c index 5c0d279..0fb9ba5 100644 --- a/common/memsize.c +++ b/common/memsize.c @@ -33,28 +33,38 @@ long get_ram_size(long *base, long maxsize) long size; int i = 0; - for (cnt = (maxsize / sizeof(long)) >> 1; cnt >= 0; cnt >>= 1) { + for (cnt = (maxsize / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { addr = base + cnt; /* pointer arith! */ sync(); - save[i] = *addr; + save[i++] = *addr; sync(); - if (cnt) { - i++; - *addr = ~cnt; - } else { - *addr = 0; - } + *addr = ~cnt; } + addr = base; + sync(); + save[i] = *addr; + sync(); + *addr = 0; + sync(); - cnt = 0; - do { + if ((val = *addr) != 0) { + /* Restore the original data before leaving the function. */ + sync(); + *addr = save[i]; + for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) { + addr = base + cnt; + sync(); + *addr = save[--i]; + } + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) { addr = base + cnt; /* pointer arith! */ val = *addr; - *addr = save[i--]; - sync(); - if (((cnt == 0) && (val != 0)) || - ((cnt != 0) && (val != ~cnt))) { + *addr = save[--i]; + if (val != ~cnt) { size = cnt * sizeof(long); /* * Restore the original data @@ -64,16 +74,11 @@ long get_ram_size(long *base, long maxsize) cnt < maxsize / sizeof(long); cnt <<= 1) { addr = base + cnt; - *addr = save[i--]; + *addr = save[--i]; } return (size); } - - if (cnt) - cnt = cnt << 1; - else - cnt = 1; - } while (cnt < maxsize / sizeof(long)); + } return (maxsize); } -- 2.5.0

4 5

[U-Boot] [PATCH 1/2] ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
by Masahiro Yamada 10 Feb '16

10 Feb '16

This board has an EEPROM connected to the I2C channel 0 of the SoC. Its slave address is 0x54. Signed-off-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> --- arch/arm/dts/uniphier-proxstream2-gentil.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts index b198d8e..5178ba3 100644 --- a/arch/arm/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts @@ -39,6 +39,12 @@ &i2c0 { status = "okay"; + + eeprom { + compatible = "24c64", "i2c-eeprom"; + reg = <0x54>; + u-boot,i2c-offset-len = <2>; + }; }; &emmc { -- 1.9.1

1 1

[U-Boot] [PATCH] OMAP3_logic: Add NAND args to boot UBIFS
by Adam Ford 10 Feb '16

10 Feb '16

With the recent addition of UBI support, this patch will add the preset parameters to allow for mouting an UBIFS from the 'fs' partition in NAND. Signed-off-by: Adam Ford <aford173(a)gmail.com> --- include/configs/omap3_logic.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 9ea6ef3..300bbff 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -180,6 +180,8 @@ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=4 noinitrd\0" \ + "nandrootfstype=ubifs rootwait\0" \ "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ @@ -221,6 +223,10 @@ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "nandargs=run setconsole; setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ "fdtaddr=0x86000000\0" \ "loadfdtimage=mmc rescan; " \ "fatload mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \ -- 1.9.1

2 1

[U-Boot] [PATCH v2 00/18] Add support for 96boards Dragonboard410C board
by Mateusz Kulikowski 09 Feb '16

09 Feb '16

Hi All, This is updated series. 99% of review changes are applied, specific changes are (as always) include in each patch. You can find this series on my github (if anyone just want to try it - that branch has also wait_for_bit applied): https://github.com/hallor/u-boot/tree/dragonboard-for-mainline-v2 I did target tests on Dragonboard410c, and build tested platforms that may be affected by ULPI changes. @Simon: I decided not to rewrite pm8916_gpio for now, but for sake of "cleannes" moved offending bindings to separate file (and they are now properly childs of pm8916_gpio). I will update it during rework of SoC gpio driver (I will have to create proper pinmux/pinctrl drivers to get rid of Little Kernel eventually). This series still needs wait_for_bit series that is not included (yet). Regards, Mateusz V1 cover contents: I finally managed to cleanup RFC for submission. I've included changes in each patch, there is a bit of them, but all are needed :) This series requires wait_for_bit patch that I send few days ago: https://patchwork.ozlabs.org/patch/561185/ RFC cover contents: http://lists.denx.de/pipermail/u-boot/2015-December/237365.html Changes in v2: - Added newline before return... (globally) - Renamed p to priv (priv data) - it required some rewrapping - Added Reviewed-by - Reordered includes (again) - Added newlines between returns - Fixed error handling in msm_gpio_probe - Added reviewed-by - Add reviewed-by - Add Reviewed-by (sjg) - Add better (any) descriptions for Kconfig items. - New patch, independent of the rest - Should compile cleanly on all affected platforms - Is orthogonal to series (i.e. if get's NAK will not break rest of series) - Add acked-by - Add reviewed-by - Add Acked-by - Use PORT_... macro to write to portsc - Remove extra whitespace in probe() - Add acked-by - Use proper entry order in Kconfig - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Fix header ordering - Add reviewed-by - Rename CONFIG_DM_SPMI -> CONFIG_SPMI - Rename r -> regs, p -> priv - Add reviewed-by - Update binding doc (drop unused bindig) - Rename DM_SPMI -> SPMI - Rename p -> priv (in write/read) - Fix header ordering (again) - Add reviewed-by - Add reviewed-by - Reordered Kconfig & Makefile (to keep alphabetical ordering) - Added link to dt binding @ help - Add Reviewed-by - Rename DM_SPMI -> SPMI - Make MND divider comments more compact :) - p -> priv - Add reviewed-by - Reordered Kconfig to keep alphabetical order - Renamed reset_sandbox -> msm_reset (typo in reset.c) - Renamed CONFIG_DM_SPMI -> CONFIG_SPMI - Removed extra enter in dragonboard file - Added ULPI* to defconfig - Added MAINTAINERS to board - Cleaned up config file - use distro defaults/environment: - Dropped multiple CONFIG_CMD* and other CONFIG_* - Added distro env/config - Dropped old boot commands - Split dts - pm8916_gpio entries are taken directly from Linux Dragonboard dts; Add handles for u-boot in -uboot.dtsi; They will be removed once gpio drivers are converted to pinctrl. - Renamed some pmic nodes, fixed dragonboard.c to find them properly. - Added header and converted comments to c98-style in head.S - Print error if pmic gpio node is not found. - New patch Changes in v1: - Added (better) help to KConfig - Added dt binding documentation - Fixed include ordering - Reworked msm_serial_getc - Added error handling to msm_uart_clk_init (that is ignored later for now) - Dropped unneeded DM_FLAG_PRE_RELOC - Added dt binding documentation - Added help to KConfig - Use clrsetbits() to switch direction - Fixed include order - Added #defines for registers/register fields - Added secondary compatible string - Added commit message - Added DT binding documentation - Added Kconfig help - Reordered includes - Dropped redundant fields from msm_sdhc - Cleaned up clock init code (+ added error handling) - Dropped mdelay - use wait_for_bit instead in reset code - Added missing newline after declarations - Added error handling if "reg" is missing - Converted base address to pointer - No changes, just added Acked-by, Reviewed-by - Reordered header files - Removed braces around constant - Added more verbose help to KConfig - Added ULPI dependency to Kconfig - Drop register #defines - use ehci-ci.h instead - Create fixed ulpi viewport for device - Use setbits/clearbits where possible - Use wait_for_bit to reset controller - Add dt binding documents - Reorder includes - Add read/write arguments documentation - add binding documentation and better Kconfig help - Changed a bit mapping - Change include order - Use clrsetbits* where possible - Add one more supported dts id - Handle missing fields in dt properly - Added dt bindings - Reoder includes - Replaced extract_* macros with ordinary shift/mask - Added error checking and whitespaces in probe - Add binding doc - Fixed inlcude ordering - Merged direction_input and direction_output functions - gpio_get: use switch instead of stacked if - use pmic_clrsetbits - add possibility to change prwkey bank name - Handle invalid bindings - Sanity HW check (i.e. check type/subtype registers) - Fix include order - Cleanup defines (added spaces for readibility) - Base address is integer to avoid casting - Use setbits_* family where possible - Drop unneded comments, added newlines where needed - Check return value of dev_get_addr - Add binding for apq8016 - Cleaned up divider calculation - Drop most of gpio.h (only empty file is needed) - Add better help for dragonboard - Move static structures to board_prepare_usb - Add DM_SPMI to defconfig Mateusz Kulikowski (18): serial: Add support for Qualcomm serial port gpio: Add support for Qualcomm gpio controller mmc: Add support for Qualcomm SDHCI controller ehci-hcd: Add init_after_reset usb: ulpi: Add Kconfig options for ULPI Migrate CONFIG_ULPI* to Kconfig usb: Rename ehci-fsl.h to ehci-ci.h usb: ehci-ci: Add missing registers. ehci-ci.h: drop generic USBCMD fields ehci: Add support for Qualcomm EHCI drivers: Add SPMI bus uclass spmi: Add sandbox test driver drivers: spmi: Add support for Qualcomm SPMI bus driver pmic: Add support for Qualcomm PM8916 PMIC gpio: Add support for Qualcomm PM8916 gpios arm: Add support for Qualcomm Snapdragon family board: Add Qualcomm Dragonboard 410C support Add myself as Snapdragon and SPMI maintainer MAINTAINERS | 11 + arch/arm/Kconfig | 12 + arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/dragonboard410c-uboot.dtsi | 28 ++ arch/arm/dts/dragonboard410c.dts | 148 ++++++++++ arch/arm/mach-snapdragon/Kconfig | 26 ++ arch/arm/mach-snapdragon/Makefile | 8 + arch/arm/mach-snapdragon/clock-apq8016.c | 262 ++++++++++++++++++ arch/arm/mach-snapdragon/include/mach/gpio.h | 9 + .../mach-snapdragon/include/mach/sysmap-apq8016.h | 14 + arch/arm/mach-snapdragon/reset.c | 40 +++ arch/sandbox/dts/sandbox.dts | 20 ++ board/qualcomm/dragonboard410c/Kconfig | 15 + board/qualcomm/dragonboard410c/MAINTAINERS | 6 + board/qualcomm/dragonboard410c/Makefile | 8 + board/qualcomm/dragonboard410c/dragonboard410c.c | 131 +++++++++ board/qualcomm/dragonboard410c/head.S | 28 ++ board/qualcomm/dragonboard410c/readme.txt | 40 +++ board/qualcomm/dragonboard410c/u-boot.lds | 90 ++++++ configs/colibri_t20_defconfig | 2 + configs/dragonboard410c_defconfig | 31 +++ configs/harmony_defconfig | 2 + configs/mcx_defconfig | 3 + configs/mt_ventoux_defconfig | 3 + configs/sandbox_defconfig | 4 + configs/twister_defconfig | 3 + configs/zynq_picozed_defconfig | 3 + configs/zynq_zc702_defconfig | 3 + configs/zynq_zc706_defconfig | 3 + configs/zynq_zed_defconfig | 3 + configs/zynq_zybo_defconfig | 3 + doc/device-tree-bindings/gpio/gpio-msm.txt | 22 ++ doc/device-tree-bindings/gpio/pm8916_gpio.txt | 48 ++++ doc/device-tree-bindings/mmc/msm_sdhci.txt | 25 ++ doc/device-tree-bindings/pmic/pm8916.txt | 18 ++ doc/device-tree-bindings/serial/msm-serial.txt | 6 + doc/device-tree-bindings/spmi/spmi-msm.txt | 26 ++ doc/device-tree-bindings/spmi/spmi-sandbox.txt | 31 +++ doc/device-tree-bindings/usb/ehci-msm.txt | 10 + doc/git-mailrc | 3 + drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/gpio/Kconfig | 24 ++ drivers/gpio/Makefile | 3 +- drivers/gpio/msm_gpio.c | 135 +++++++++ drivers/gpio/pm8916_gpio.c | 302 +++++++++++++++++++++ drivers/mmc/Kconfig | 9 + drivers/mmc/Makefile | 1 + drivers/mmc/msm_sdhci.c | 180 ++++++++++++ drivers/power/pmic/Kconfig | 16 ++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pm8916.c | 96 +++++++ drivers/serial/Kconfig | 8 + drivers/serial/Makefile | 1 + drivers/serial/serial_msm.c | 212 +++++++++++++++ drivers/spmi/Kconfig | 23 ++ drivers/spmi/Makefile | 9 + drivers/spmi/spmi-msm.c | 189 +++++++++++++ drivers/spmi/spmi-sandbox.c | 157 +++++++++++ drivers/spmi/spmi-uclass.c | 48 ++++ drivers/usb/Kconfig | 2 + drivers/usb/host/Kconfig | 11 + drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-hcd.c | 6 + drivers/usb/host/ehci-mpc512x.c | 6 +- drivers/usb/host/ehci-msm.c | 178 ++++++++++++ drivers/usb/host/ehci-mx5.c | 2 +- drivers/usb/host/ehci-mx6.c | 2 +- drivers/usb/host/ehci-mxc.c | 2 +- drivers/usb/host/ehci-vf.c | 2 +- drivers/usb/host/ehci-zynq.c | 2 +- drivers/usb/host/ehci.h | 1 + drivers/usb/ulpi/Kconfig | 33 +++ include/configs/colibri_t20.h | 2 - include/configs/dragonboard410c.h | 153 +++++++++++ include/configs/harmony.h | 2 - include/configs/mcx.h | 2 - include/configs/tam3517-common.h | 2 - include/configs/zynq-common.h | 2 - include/dm/uclass-id.h | 1 + include/spmi/spmi.h | 47 ++++ include/usb/{ehci-fsl.h => ehci-ci.h} | 16 +- test/dm/Makefile | 1 + test/dm/spmi.c | 115 ++++++++ 86 files changed, 3133 insertions(+), 28 deletions(-) create mode 100644 arch/arm/dts/dragonboard410c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard410c.dts create mode 100644 arch/arm/mach-snapdragon/Kconfig create mode 100644 arch/arm/mach-snapdragon/Makefile create mode 100644 arch/arm/mach-snapdragon/clock-apq8016.c create mode 100644 arch/arm/mach-snapdragon/include/mach/gpio.h create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h create mode 100644 arch/arm/mach-snapdragon/reset.c create mode 100644 board/qualcomm/dragonboard410c/Kconfig create mode 100644 board/qualcomm/dragonboard410c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard410c/Makefile create mode 100644 board/qualcomm/dragonboard410c/dragonboard410c.c create mode 100644 board/qualcomm/dragonboard410c/head.S create mode 100644 board/qualcomm/dragonboard410c/readme.txt create mode 100644 board/qualcomm/dragonboard410c/u-boot.lds create mode 100644 configs/dragonboard410c_defconfig create mode 100644 doc/device-tree-bindings/gpio/gpio-msm.txt create mode 100644 doc/device-tree-bindings/gpio/pm8916_gpio.txt create mode 100644 doc/device-tree-bindings/mmc/msm_sdhci.txt create mode 100644 doc/device-tree-bindings/pmic/pm8916.txt create mode 100644 doc/device-tree-bindings/serial/msm-serial.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-msm.txt create mode 100644 doc/device-tree-bindings/spmi/spmi-sandbox.txt create mode 100644 doc/device-tree-bindings/usb/ehci-msm.txt create mode 100644 drivers/gpio/msm_gpio.c create mode 100644 drivers/gpio/pm8916_gpio.c create mode 100644 drivers/mmc/msm_sdhci.c create mode 100644 drivers/power/pmic/pm8916.c create mode 100644 drivers/serial/serial_msm.c create mode 100644 drivers/spmi/Kconfig create mode 100644 drivers/spmi/Makefile create mode 100644 drivers/spmi/spmi-msm.c create mode 100644 drivers/spmi/spmi-sandbox.c create mode 100644 drivers/spmi/spmi-uclass.c create mode 100644 drivers/usb/host/ehci-msm.c create mode 100644 drivers/usb/ulpi/Kconfig create mode 100644 include/configs/dragonboard410c.h create mode 100644 include/spmi/spmi.h rename include/usb/{ehci-fsl.h => ehci-ci.h} (96%) create mode 100644 test/dm/spmi.c -- 2.5.0

3 38