February 2016 - U-Boot

[U-Boot] [PATCH] mx7dsabresd: Make 'ums' command functional
by Fabio Estevam 21 Feb '16

21 Feb '16

When running the 'ums' command we get: => ums 0 mmc 0 UMS: disk start sector: 0x0, count: 0xe18000 g_dnl_register: failed!, error: -22 ERROR: g_dnl_register failed at common/cmd_usb_mass_storage.c:107/do_usb_mass_storage() Fix this by initializing USB OTG1 port as USB device mode instead of host. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- board/freescale/mx7dsabresd/mx7dsabresd.c | 41 ++++++++++++++----------------- 1 file changed, 18 insertions(+), 23 deletions(-) diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index fee24e2..4d0b195 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -23,6 +23,7 @@ #include <i2c.h> #include <asm/imx-common/mxc_i2c.h> #include <asm/arch/crm_regs.h> +#include <usb.h> #include <usb/ehci-fsl.h> DECLARE_GLOBAL_DATA_PTR; @@ -111,6 +112,14 @@ static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; +static iomux_v3_cfg_t const usb_otg1_pads[] = { + MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usb_otg2_pads[] = { + MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + #define IOX_SDI IMX_GPIO_NR(1, 9) #define IOX_STCP IMX_GPIO_NR(1, 12) #define IOX_SHCP IMX_GPIO_NR(1, 13) @@ -511,6 +520,10 @@ int board_early_init_f(void) setup_iomux_uart(); setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, + ARRAY_SIZE(usb_otg1_pads)); + imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, + ARRAY_SIZE(usb_otg2_pads)); return 0; } @@ -602,29 +615,11 @@ int checkboard(void) } #ifdef CONFIG_USB_EHCI_MX7 -static iomux_v3_cfg_t const usb_otg1_pads[] = { - MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usb_otg2_pads[] = { - MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_ehci_hcd_init(int port) +int board_usb_phy_mode(int port) { - switch (port) { - case 0: - imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, - ARRAY_SIZE(usb_otg1_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, - ARRAY_SIZE(usb_otg2_pads)); - break; - default: - printf("MXC USB port %d not yet supported\n", port); - return -EINVAL; - } - return 0; + if (port == 0) + return USB_INIT_DEVICE; + else + return USB_INIT_HOST; } #endif -- 1.9.1

2 1

[U-Boot] [PATCH] mx7dsabresd: Use Adrian's NXP email address
by Fabio Estevam 21 Feb '16

21 Feb '16

Use the new NXP email address for the board maintainer. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- board/freescale/mx7dsabresd/MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx7dsabresd/MAINTAINERS b/board/freescale/mx7dsabresd/MAINTAINERS index 3910ee4..b96642a 100644 --- a/board/freescale/mx7dsabresd/MAINTAINERS +++ b/board/freescale/mx7dsabresd/MAINTAINERS @@ -1,5 +1,5 @@ MX7DSABRESD BOARD -M: Adrian Alonso <aalonso(a)freescale.com> +M: Adrian Alonso <adrian.alonso(a)nxp.com> S: Maintained F: board/freescale/mx7dsabresd F: include/configs/mx7dsabresd.h -- 1.9.1

2 1

[U-Boot] [PATCH] mx6ul_14x14_evk: Select CONFIG_FSL_QSPI
by Fabio Estevam 21 Feb '16

21 Feb '16

From: Fabio Estevam <fabio.estevam(a)nxp.com> Select CONFIG_FSL_QSPI so that the SPI can be probed: => sf probe SF: Detected N25Q256 with page size 256 Bytes, erase size 64 KiB, total 32 MiB Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> --- include/configs/mx6ul_14x14_evk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 4374c3a..c7e10f9 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -195,6 +195,7 @@ #define CONFIG_CMD_CACHE #endif +#define CONFIG_FSL_QSPI #ifdef CONFIG_FSL_QSPI #define CONFIG_CMD_SF #define CONFIG_SPI_FLASH -- 1.9.1

3 2

[U-Boot] [PATCH] x86: doc: Update to include Intel Bayley Bay board instructions
by Bin Meng 21 Feb '16

21 Feb '16

Update existing documentation to mention Intel Bayley Bay board instructions, an additional Bay Trail based board to MinnowMax. This also adds a minor change to QEMU section to indicate clearly the instructions are for bare mode. Signed-off-by: Bin Meng <bmeng.cn(a)gmail.com> --- doc/README.x86 | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) diff --git a/doc/README.x86 b/doc/README.x86 index 948deca..d3fea5d 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -154,18 +154,28 @@ all set. For programming U-Boot we just need to program SPI-1 flash. --- -Intel Minnowboard Max instructions for bare mode: +Intel Bay Trail based board instructions for bare mode: This uses as FSP as with Crown Bay, except it is for the Atom E3800 series. +Two boards that use this configuration are Bayley Bay and Minnowboard MAX. Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at -the time of writing). Put it in the board directory: -board/intel/minnowmax/fsp.bin +the time of writing). Put it in the corresponding board directory and rename +it to fsp.bin. Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same -directory: board/intel/minnowmax/vga.bin +board directory as vga.bin. -You still need two more binary blobs. The first comes from the original -firmware image available from: +You still need two more binary blobs. For Bayley Bay, they can be extracted +from the sample SPI image provided in the FSP (SPI.bin at the time of writing). + + $ ./tools/ifdtool -x BayleyBay/SPI.bin + $ cp flashregion_0_flashdescriptor.bin board/intel/bayleybay/descriptor.bin + $ cp flashregion_2_intel_me.bin board/intel/bayleybay/me.bin + +For Minnowboard MAX, we can reuse the same ME firmware above, but for flash +descriptor, we need get that somewhere else, as the one above does not seem to +work, probably because it is not designed for the Minnowboard MAX. Now download +the original firmware image for this board from: http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73… @@ -182,16 +192,8 @@ This will provide the descriptor file - copy this into the correct place: $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin -Then do the same with the sample SPI image provided in the FSP (SPI.bin at -the time of writing) to obtain the last image. Note that this will also -produce a flash descriptor file, but it does not seem to work, probably -because it is not designed for the Minnowmax. That is why you need to get -the flash descriptor from the original firmware as above. - - $ ./tools/ifdtool -x BayleyBay/SPI.bin - $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin - Now you can build U-Boot and obtain u-boot.rom +Note: below are examples/information for Minnowboard MAX. $ make minnowmax_defconfig $ make all @@ -242,7 +244,9 @@ Now you can build U-Boot and obtain u-boot.rom $ make galileo_defconfig $ make all -QEMU x86 target instructions: +--- + +QEMU x86 target instructions for bare mode: To build u-boot.rom for QEMU x86 targets, just simply run -- 1.8.2.1

2 2

[U-Boot] [PATCH v3 0/5] x86: ivybridge: Add Intel FSP support
by Bin Meng 21 Feb '16

21 Feb '16

This series adds Intel FSP support to IvyBridge processor and Panther Point chipset (aka Chief River platform), and is validated on Intel Cougar Canyon 2 board. This only adds basic features like serial, keyboard, RTC, timer, SPI, GPIO, PCI, SATA, USB. Other features will be enabled in future patch set. Changes in v3: - Update README.x86 to include intructions for this board Changes in v2: - Drop patches which were already applied - Rebase on top of u-boot-x86/master - Change fsp files license from Intel to GPL-2.0+ - Introduce a Kconfig option to wrap these codes - Change include order - <asm/...> go after the normal includes - Use PCH uclass driver and change to use dm pci config APIs Bin Meng (5): x86: ivybridge: Add FSP support superio: Add SMSC SIO1007 driver x86: fsp: Make sure HOB list is not overwritten by U-Boot x86: ivybridge: bd82x6x: Support FSP enabled configuration x86: Add Intel Cougar Canyon 2 board arch/x86/Kconfig | 10 ++ arch/x86/cpu/ivybridge/Kconfig | 12 ++ arch/x86/cpu/ivybridge/Makefile | 6 +- arch/x86/cpu/ivybridge/bd82x6x.c | 4 + arch/x86/cpu/ivybridge/fsp_configs.c | 45 ++++++++ arch/x86/cpu/ivybridge/ivybridge.c | 22 ++++ arch/x86/dts/Makefile | 1 + arch/x86/dts/cougarcanyon2.dts | 104 +++++++++++++++++ .../include/asm/arch-ivybridge/fsp/fsp_configs.h | 40 +++++++ arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h | 12 ++ arch/x86/lib/fsp/fsp_support.c | 33 ++++++ board/intel/Kconfig | 9 ++ board/intel/cougarcanyon2/Kconfig | 25 ++++ board/intel/cougarcanyon2/MAINTAINERS | 6 + board/intel/cougarcanyon2/Makefile | 7 ++ board/intel/cougarcanyon2/cougarcanyon2.c | 58 ++++++++++ board/intel/cougarcanyon2/start.S | 9 ++ configs/cougarcanyon2_defconfig | 20 ++++ doc/README.x86 | 21 ++++ drivers/misc/Makefile | 1 + drivers/misc/smsc_sio1007.c | 126 +++++++++++++++++++++ include/configs/cougarcanyon2.h | 34 ++++++ include/smsc_sio1007.h | 115 +++++++++++++++++++ 23 files changed, 719 insertions(+), 1 deletion(-) create mode 100644 arch/x86/cpu/ivybridge/fsp_configs.c create mode 100644 arch/x86/cpu/ivybridge/ivybridge.c create mode 100644 arch/x86/dts/cougarcanyon2.dts create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_configs.h create mode 100644 arch/x86/include/asm/arch-ivybridge/fsp/fsp_vpd.h create mode 100644 board/intel/cougarcanyon2/Kconfig create mode 100644 board/intel/cougarcanyon2/MAINTAINERS create mode 100644 board/intel/cougarcanyon2/Makefile create mode 100644 board/intel/cougarcanyon2/cougarcanyon2.c create mode 100644 board/intel/cougarcanyon2/start.S create mode 100644 configs/cougarcanyon2_defconfig create mode 100644 drivers/misc/smsc_sio1007.c create mode 100644 include/configs/cougarcanyon2.h create mode 100644 include/smsc_sio1007.h -- 1.8.2.1

1 10

[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
by Andreas Bießmann 21 Feb '16

21 Feb '16

Hi Tom, Please pull into u-boot/master. buildman for arm has a warning in one patch which is repaired some patches later in this pull. I think this is Ok since it is an unused variable warning for some boards which do not declare a specific define. The later patch will remove the warning line completely. Andreas The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b: Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000) are available in the git repository at: git://git.denx.de/u-boot-atmel.git master for you to fetch changes up to bb21ae82b27aa51254f32f0238d3bf60874646dd: ARM: Add Support for the VInCo platform (2016-02-18 21:46:20 +0100) ---------------------------------------------------------------- Gregory CLEMENT (1): ARM: Add Support for the VInCo platform Marek Vasut (1): arm: at91: Add support for DENX MA5D4 SoM and EVK Matthias Michel (1): siemens,at91: enable features for smartweb Samuel Mescoff (1): ARM: at91: sama5d2: configure the L2 cache memory Wenyou Yang (15): ARM: at91: asm/at91_pmc.h: fix trival register offset ARM: at91: clock: add a new file to handle clock ARM: cpu: at91: clean up peripheral clock code board: atmel: clean up peripheral clock code drivers: at91: clean up peripheral clock code ARM: at91: clock: add UTMI PLL enable/disable function ARM: at91: armv7: clean up UTMI PLL handle code drivers: usb: atmel: clean up the UTMI PLL code board: atmel: siemens: clean up UTMI PLL code ARM: at91: clock: add PLLB enable/disable functions drivers: usb: ohci-at91: clean up the PLLB code board: atmel: siemens: clean up PLLB code ARM: at91: clock: add PMC_PLLICPR init function ARM: at91: clean up the PMC_PLLICPR init code board: atmel: clean up the PMC_PLLICPR init code arch/arm/mach-at91/Kconfig | 12 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 14 +- arch/arm/mach-at91/arm920t/clock.c | 38 ++ arch/arm/mach-at91/arm920t/timer.c | 6 +- arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c | 36 +- arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c | 28 +- arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c | 37 +- .../mach-at91/arm926ejs/at91sam9m10g45_devices.c | 33 +- arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c | 40 +- arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c | 28 +- arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c | 38 +- arch/arm/mach-at91/arm926ejs/clock.c | 37 +- arch/arm/mach-at91/arm926ejs/cpu.c | 1 - arch/arm/mach-at91/arm926ejs/timer.c | 5 +- arch/arm/mach-at91/armv7/clock.c | 26 -- arch/arm/mach-at91/armv7/cpu.c | 1 - arch/arm/mach-at91/armv7/sama5d2_devices.c | 5 +- arch/arm/mach-at91/armv7/sama5d3_devices.c | 5 +- arch/arm/mach-at91/armv7/sama5d4_devices.c | 5 +- arch/arm/mach-at91/armv7/timer.c | 1 - arch/arm/mach-at91/atmel_sfr.c | 7 + arch/arm/mach-at91/clock.c | 121 ++++++ arch/arm/mach-at91/include/mach/at91_common.h | 1 + arch/arm/mach-at91/include/mach/at91_pmc.h | 15 +- arch/arm/mach-at91/include/mach/clk.h | 8 + arch/arm/mach-at91/include/mach/sama5_sfr.h | 1 + arch/arm/mach-at91/phy.c | 1 - arch/arm/mach-at91/sdram.c | 1 - arch/arm/mach-at91/spl_at91.c | 5 +- arch/arm/mach-at91/spl_atmel.c | 4 + board/atmel/at91rm9200ek/at91rm9200ek.c | 1 - board/atmel/at91rm9200ek/led.c | 6 +- board/atmel/at91sam9260ek/at91sam9260ek.c | 15 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 8 +- board/atmel/at91sam9261ek/led.c | 6 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +- board/atmel/at91sam9263ek/led.c | 9 +- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 20 +- board/atmel/at91sam9m10g45ek/led.c | 7 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 6 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 18 +- board/atmel/at91sam9rlek/led.c | 7 +- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 +- board/atmel/sama5d2_xplained/sama5d2_xplained.c | 1 - board/atmel/sama5d3_xplained/sama5d3_xplained.c | 9 +- board/atmel/sama5d3xek/sama5d3xek.c | 9 +- board/atmel/sama5d4_xplained/sama5d4_xplained.c | 9 +- board/atmel/sama5d4ek/sama5d4ek.c | 9 +- board/bluewater/snapper9260/snapper9260.c | 15 +- board/calao/usb_a9263/usb_a9263.c | 11 +- board/denx/ma5d4evk/Kconfig | 12 + board/denx/ma5d4evk/MAINTAINERS | 6 + board/denx/ma5d4evk/Makefile | 7 + board/denx/ma5d4evk/ma5d4evk.c | 412 +++++++++++++++++++++ board/egnite/ethernut5/ethernut5.c | 20 +- board/esd/meesc/meesc.c | 15 +- board/l+g/vinco/Kconfig | 12 + board/l+g/vinco/Makefile | 1 + board/l+g/vinco/vinco.c | 212 +++++++++++ board/mini-box/picosam9g45/led.c | 7 +- board/mini-box/picosam9g45/picosam9g45.c | 17 +- board/ronetix/pm9261/led.c | 7 +- board/ronetix/pm9261/pm9261.c | 22 +- board/ronetix/pm9263/led.c | 7 +- board/ronetix/pm9263/pm9263.c | 19 +- board/ronetix/pm9g45/pm9g45.c | 20 +- board/siemens/corvus/board.c | 10 +- board/siemens/smartweb/smartweb.c | 9 +- board/siemens/taurus/taurus.c | 9 +- configs/ma5d4evk_defconfig | 11 + configs/smartweb_defconfig | 5 +- configs/vinco_defconfig | 13 + drivers/net/at91_emac.c | 10 +- drivers/usb/host/ehci-atmel.c | 46 +-- drivers/usb/host/ohci-at91.c | 64 +--- include/configs/ma5d4evk.h | 255 +++++++++++++ include/configs/smartweb.h | 14 +- include/configs/vinco.h | 168 +++++++++ 79 files changed, 1568 insertions(+), 602 deletions(-) create mode 100644 arch/arm/mach-at91/clock.c create mode 100644 board/denx/ma5d4evk/Kconfig create mode 100644 board/denx/ma5d4evk/MAINTAINERS create mode 100644 board/denx/ma5d4evk/Makefile create mode 100644 board/denx/ma5d4evk/ma5d4evk.c create mode 100644 board/l+g/vinco/Kconfig create mode 100644 board/l+g/vinco/Makefile create mode 100644 board/l+g/vinco/vinco.c create mode 100644 configs/ma5d4evk_defconfig create mode 100644 configs/vinco_defconfig create mode 100644 include/configs/ma5d4evk.h create mode 100644 include/configs/vinco.h

2 4

[U-Boot] Please pull ARC changes
by Alexey Brodkin 20 Feb '16

20 Feb '16

Hi Tom, The following changes since commit 86a0df732853d1a11eb3eaa3cda688d9ef7b34e5: spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS (2016-02-19 09:31:37 -0500) are available in the git repository at: git://git.denx.de/u-boot-arc.git for you to fetch changes up to db6ce2312dcae87619136457d1f9df56789f630a: arc: cache - utilize IO coherency (AKA IOC) engine (2016-02-20 11:20:05 +0300) ---------------------------------------------------------------- Alexey Brodkin (2): arc: cache - accommodate different L1 cache line lengths arc: cache - utilize IO coherency (AKA IOC) engine arch/arc/Kconfig | 11 ----- arch/arc/include/asm/arcregs.h | 7 ++++ arch/arc/include/asm/cache.h | 14 +++---- arch/arc/lib/cache.c | 175 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------- configs/axs101_defconfig | 1 - configs/tb100_defconfig | 1 - 6 files changed, 146 insertions(+), 63 deletions(-) Regards, Alexey

2 1

[U-Boot] SUN7i - bananapi Ethernet
by Hannes Schmelzer 20 Feb '16

20 Feb '16

hi, i just built and started most current mainline u-boot for my bananapi board. I have the problem, that ethernet doesn't work at all: U-Boot 2016.03-rc1-00196-gfdb4f0e (Feb 16 2016 - 22:05:33 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c50000 => dhcp ethernet@01c50000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! ethernet@01c50000: No link. => i can remember that this worked in the past. I also tried to start some linux, there ethernet is working. But just working, not very well, if i send out pakets with >512byte they get lost. i suspect there is something wrong with the connection between phy and mac. is there anybody who has working ethernet on banana pi ? best regards, Hannes

1 0

[U-Boot] Beaglebone Black broken since commit fd61d39970b9901217efc7536d9f3a61b4e1752a
by Guillaume Gardet 20 Feb '16

20 Feb '16

Hi, Beaglebone black (am335x_evm_defconfig) is broken (with MMC boot and u-boot.img on ext4 partition). I bisected it to commit fd61d39970b9901217efc7536d9f3a61b4e1752a spl: mmc: add break statements in spl_mmc_load_image() from Nikita Kiryanov (in Cc). Working image gives: ******************************************************************************** U-Boot SPL 2016.01-rc1-00036-g483ab3d (Feb 16 2016 - 19:04:10) bad magic bad magic spl_register_fat_device: fat register err - -1 spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 spl: ext4fs_open failed spl: ext4fs_open failed spl_load_image_ext: error reading image uImage, err - -1 U-Boot 2016.01-rc1-00033-g9884f44 (Feb 16 2016 - 18:55:52 +0100) ******************************************************************************** Since this commit, we get: ******************************************************************************** U-Boot SPL 2016.01-rc1-00037-gfd61d39 (Feb 16 2016 - 19:01:54) bad magic bad magic ### ERROR ### Please RESET the board ### ******************************************************************************** Guillaume

4 16

[U-Boot] Pull request, u-boot-tegra/master
by Tom Warren 20 Feb '16

20 Feb '16

Tom, Please pull u-boot-tegra/master into U-Boot/master. Thanks! All tegra builds are OK (32-bit and 64-bit). The following changes since commit 727a25b2418031e1b94ba603e0eb61657024091b: Prepare v2016.03-rc2 (2016-02-15 21:44:30 +0000) are available in the git repository at: git://git.denx.de/u-boot-tegra.git master for you to fetch changes up to 5589bc2770a7d7fe346f5972596f26d1ddf57bba: ARM: tegra: enable USB device mode port on Dalmore (2016-02-18 10:02:19 -0700) ---------------------------------------------------------------- Simon Glass (24): tegra: keyboard: Fix the init order dm: video: Flush the cache after a puts() tegra: mmc: Fix comments in the MMC driver init tegra: dts: Sync up the tegra124 device tree files with Linux tegra: dts: Sync up nyan-big files with Linux tegra: gpio: Show the GPIO value for outputs tegra: pwm: Add a driver for the tegra PWM tegra: lcd: Merge tegra124-lcd.c into display.c tegra: Allow driver model to be used for the PWM tegra: Allow CONFIG_DM_VIDEO to be used as well as CONFIG_LCD tegra: nyan-big: Move the LCD driver to driver model tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20 tegra: dts: Sync tegra20.dtsi with Linux v4.4 tegra: video: Merge the display driver into one file tegra: video: Move the check for CONFIG_OF_CONTROL to Kconfig tegra: video: Merge the two config structures together tegra: video: Convert tegra20 LCD driver to driver model tegra: video: Remove the static variables tegra: video: Move LCD enums into the driver tegra: video: Move all fdt-decoding into a single function tegra: Convert CONFIG_PWM_TEGRA to Kconfig tegra: video: Move LCD driver to use the DM PWM driver tegra: video: Clean up the old LCD/PWM driver code video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCD Stephen Warren (2): ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT ARM: tegra: enable USB device mode port on Dalmore arch/arm/dts/tegra114-dalmore.dts | 9 +- arch/arm/dts/tegra124-jetson-tk1.dts | 13 + arch/arm/dts/tegra124-nyan-big.dts | 1676 ++++++++++++++++++----- arch/arm/dts/tegra124-nyan.dtsi | 718 ++++++++++ arch/arm/dts/tegra124-venice2.dts | 14 + arch/arm/dts/tegra124.dtsi | 693 ++++++++-- arch/arm/dts/tegra20-colibri.dts | 22 +- arch/arm/dts/tegra20-harmony.dts | 44 +- arch/arm/dts/tegra20-medcom-wide.dts | 26 +- arch/arm/dts/tegra20-paz00.dts | 43 +- arch/arm/dts/tegra20-plutux.dts | 8 - arch/arm/dts/tegra20-seaboard.dts | 36 +- arch/arm/dts/tegra20-tamonten.dtsi | 15 +- arch/arm/dts/tegra20-tec.dts | 10 +- arch/arm/dts/tegra20-trimslice.dts | 34 +- arch/arm/dts/tegra20-ventana.dts | 43 +- arch/arm/dts/tegra20-whistler.dts | 35 +- arch/arm/dts/tegra20.dtsi | 541 ++++++-- arch/arm/include/asm/arch-tegra/dc.h | 5 - arch/arm/include/asm/arch-tegra/pwm.h | 30 - arch/arm/include/asm/arch-tegra20/display.h | 108 -- arch/arm/mach-tegra/Kconfig | 3 +- arch/arm/mach-tegra/Makefile | 1 - arch/arm/mach-tegra/board2.c | 24 +- arch/arm/mach-tegra/pwm.c | 89 -- arch/arm/mach-tegra/tegra20/Makefile | 2 - arch/arm/mach-tegra/tegra20/display.c | 378 ----- board/compal/paz00/paz00.c | 2 +- board/toradex/colibri_t20/colibri_t20.c | 2 +- configs/colibri_t20_defconfig | 6 + configs/harmony_defconfig | 6 + configs/medcom-wide_defconfig | 6 + configs/nyan-big_defconfig | 10 + configs/paz00_defconfig | 6 + configs/seaboard_defconfig | 6 + configs/tec_defconfig | 6 + configs/ventana_defconfig | 6 + drivers/gpio/tegra_gpio.c | 5 +- drivers/input/tegra-kbc.c | 2 +- drivers/mmc/tegra_mmc.c | 4 +- drivers/pwm/Kconfig | 9 + drivers/pwm/Makefile | 3 + drivers/pwm/tegra_pwm.c | 85 ++ drivers/video/Kconfig | 10 + drivers/video/Makefile | 2 +- drivers/video/simple_panel.c | 1 + drivers/video/tegra.c | 658 +++++++-- drivers/video/tegra124/Makefile | 1 - drivers/video/tegra124/display.c | 184 ++- drivers/video/tegra124/dp.c | 53 +- drivers/video/tegra124/sor.c | 162 ++- drivers/video/tegra124/sor.h | 45 +- drivers/video/tegra124/tegra124-lcd.c | 95 -- drivers/video/vidconsole-uclass.c | 1 + include/configs/apalis_t30.h | 1 - include/configs/beaver.h | 1 - include/configs/colibri_t20.h | 5 - include/configs/colibri_t30.h | 1 - include/configs/dalmore.h | 1 + include/configs/e2220-1170.h | 1 - include/configs/harmony.h | 5 - include/configs/jetson-tk1.h | 1 - include/configs/medcom-wide.h | 4 - include/configs/nyan-big.h | 4 - include/configs/p2371-0000.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/p2571.h | 1 - include/configs/paz00.h | 4 - include/configs/seaboard.h | 5 - include/configs/tec.h | 4 - include/configs/tegra-common-post.h | 10 +- include/configs/trimslice.h | 1 - include/configs/venice2.h | 1 - include/configs/ventana.h | 4 - include/dt-bindings/clock/tegra124-car-common.h | 345 +++++ include/dt-bindings/clock/tegra124-car.h | 341 +---- include/dt-bindings/memory/tegra124-mc.h | 31 + include/dt-bindings/reset/tegra124-car.h | 12 + include/dt-bindings/thermal/tegra124-soctherm.h | 13 + include/fdtdec.h | 1 - lib/fdtdec.c | 1 - 81 files changed, 4606 insertions(+), 2190 deletions(-) create mode 100644 arch/arm/dts/tegra124-nyan.dtsi delete mode 100644 arch/arm/mach-tegra/pwm.c create mode 100644 drivers/pwm/tegra_pwm.c delete mode 100644 drivers/video/tegra124/tegra124-lcd.c create mode 100644 include/dt-bindings/clock/tegra124-car-common.h create mode 100644 include/dt-bindings/memory/tegra124-mc.h create mode 100644 include/dt-bindings/reset/tegra124-car.h create mode 100644 include/dt-bindings/thermal/tegra124-soctherm.h

2 1