August 2015 - U-Boot

[U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision
by Stephen Warren 02 Aug '15

02 Aug '15

Detect the board revision early during boot, and print the decoded model name. Eventually, this information can be used for tasks such as: - Allowing/preventing USB device mode; some models have a USB device on- board so only host mode makes sense. Others connect the SoC directly to the USB connector, so device-mode might make sense. - The on-board USB hub/Ethernet requires different GPIOs to enable it, although luckily the default appears to be fine so far. - The compute module contains an on-board eMMC device, so we could store the environment there. Other models use an SD card and so don't support saving the environment (unless we store it in a file on the FAT boot partition...) Set $fdtfile based on this information. At present, the mainline Linux kernel doesn't contain a separate DTB for most models, but I hope that will change soon. Signed-off-by: Stephen Warren <swarren(a)wwwdotorg.org> --- I'm considering renaming rpi_b -> rpi in U-Boot since it supports many models. Hopefully I can persuade U-Boot to load the environment from different places at run-time, so we won't need different builds based on whether the environment is in eMMC or not for example. arch/arm/include/asm/arch-bcm2835/mbox.h | 33 +++++++++ board/raspberrypi/rpi_b/rpi_b.c | 122 ++++++++++++++++++++++++++++++- include/configs/rpi_b.h | 1 - 3 files changed, 152 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index 61f427d914cd..0289ba6a917e 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -119,6 +119,39 @@ struct bcm2835_mbox_tag_hdr { * }; */ +#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002 + +/* + * 0x2..0xf from: + * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-r… + * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733 + * 0x10, 0x11 from swarren's testing + */ +#define BCM2835_BOARD_REV_B_I2C0_2 0x2 +#define BCM2835_BOARD_REV_B_I2C0_3 0x3 +#define BCM2835_BOARD_REV_B_I2C1_4 0x4 +#define BCM2835_BOARD_REV_B_I2C1_5 0x5 +#define BCM2835_BOARD_REV_B_I2C1_6 0x6 +#define BCM2835_BOARD_REV_A_7 0x7 +#define BCM2835_BOARD_REV_A_8 0x8 +#define BCM2835_BOARD_REV_A_9 0x9 +#define BCM2835_BOARD_REV_B_REV2_d 0xd +#define BCM2835_BOARD_REV_B_REV2_e 0xe +#define BCM2835_BOARD_REV_B_REV2_f 0xf +#define BCM2835_BOARD_REV_B_PLUS 0x10 +#define BCM2835_BOARD_REV_CM 0x11 + +struct bcm2835_mbox_tag_get_board_rev { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 rev; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 struct bcm2835_mbox_tag_get_mac_address { diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c index 7445f5318ad2..aaded88b4ba0 100644 --- a/board/raspberrypi/rpi_b/rpi_b.c +++ b/board/raspberrypi/rpi_b/rpi_b.c @@ -42,6 +42,12 @@ struct msg_get_arm_mem { u32 end_tag; }; +struct msg_get_board_rev { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_board_rev get_board_rev; + u32 end_tag; +}; + struct msg_get_mac_address { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_get_mac_address get_mac_address; @@ -60,6 +66,67 @@ struct msg_get_clock_rate { u32 end_tag; }; +/* See comments in mbox.h for data source */ +static const struct { + const char *name; + const char *fdtfile; +} models[] = { + [BCM2835_BOARD_REV_B_I2C0_2] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", + }, + [BCM2835_BOARD_REV_B_I2C0_3] = { + "Model B (no P5)", + "bcm2835-rpi-b-i2c0.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_4] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_5] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_B_I2C1_6] = { + "Model B", + "bcm2835-rpi-b.dtb", + }, + [BCM2835_BOARD_REV_A_7] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_A_8] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_A_9] = { + "Model A", + "bcm2835-rpi-a.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_d] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_e] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_REV2_f] = { + "Model B rev2", + "bcm2835-rpi-b-rev2.dtb", + }, + [BCM2835_BOARD_REV_B_PLUS] = { + "Model B+", + "bcm2835-rpi-b-plus.dtb", + }, + [BCM2835_BOARD_REV_CM] = { + "Compute Module", + "bcm2835-rpi-cm.dtb", + }, +}; + +u32 rpi_board_rev = 0; + int dram_init(void) { ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16); @@ -79,13 +146,27 @@ int dram_init(void) return 0; } -int misc_init_r(void) +static void set_fdtfile(void) +{ + const char *fdtfile; + + if (getenv("fdtfile")) + return; + + fdtfile = models[rpi_board_rev].fdtfile; + if (!fdtfile) + fdtfile = "bcm2835-rpi-other.dtb"; + + setenv("fdtfile", fdtfile); +} + +static void set_usbethaddr(void) { ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16); int ret; if (getenv("usbethaddr")) - return 0; + return; BCM2835_MBOX_INIT_HDR(msg); BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS); @@ -94,11 +175,18 @@ int misc_init_r(void) if (ret) { printf("bcm2835: Could not query MAC address\n"); /* Ignore error; not critical */ - return 0; + return; } eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac); + return; +} + +int misc_init_r(void) +{ + set_fdtfile(); + set_usbethaddr(); return 0; } @@ -126,8 +214,36 @@ static int power_on_module(u32 module) return 0; } +static void get_board_rev(void) +{ + ALLOC_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1, 16); + int ret; + const char *name; + + BCM2835_MBOX_INIT_HDR(msg); + BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV); + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr); + if (ret) { + printf("bcm2835: Could not query board revision\n"); + /* Ignore error; not critical */ + return; + } + + rpi_board_rev = msg->get_board_rev.body.resp.rev; + if (rpi_board_rev >= ARRAY_SIZE(models)) + rpi_board_rev = 0; + + name = models[rpi_board_rev].name; + if (!name) + name = "Unknown model"; + printf("RPI model: %s\n", name); +} + int board_init(void) { + get_board_rev(); + gd->bd->bi_boot_params = 0x100; return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index 7bf2bfe09a0b..841169cb6c97 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -176,7 +176,6 @@ "pxefile_addr_r=0x00100000\0" \ "kernel_addr_r=0x01000000\0" \ "fdt_addr_r=0x02000000\0" \ - "fdtfile=bcm2835-rpi-b.dtb\0" \ "ramdisk_addr_r=0x02100000\0" \ #define BOOT_TARGET_DEVICES(func) \ -- 1.9.1

4 8

[U-Boot] [PATCH] armv8: Allow SoCs to override the generic timer
by Stephen Warren 02 Aug '15

02 Aug '15

From: Thierry Reding <treding(a)nvidia.com> Some SoCs come with a custom timer interface, so allow them to use that instead. swarren notes: I did consider reworking this patch so the Makefile only compiles generic_timer.c ifndef CONFIG_SYS_TIMER_COUNTER. However, I can foresee a time where generic_timer.c contains both routines to implement U-Boot's internal timer, and to perform other operations related to the generic timer, such as initializing the CNTFRQ register for a booted OS. If that happens, this version of the change will result in simpler future patches. Signed-off-by: Thierry Reding <treding(a)nvidia.com> Signed-off-by: Tom Warren <twarren(a)nvidia.com> Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- arch/arm/cpu/armv8/generic_timer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/cpu/armv8/generic_timer.c b/arch/arm/cpu/armv8/generic_timer.c index 8e60baebc534..98a865cf6ffc 100644 --- a/arch/arm/cpu/armv8/generic_timer.c +++ b/arch/arm/cpu/armv8/generic_timer.c @@ -9,6 +9,7 @@ #include <command.h> #include <asm/system.h> +#ifndef CONFIG_SYS_TIMER_COUNTER /* * Generic timer implementation of get_tbclk() */ @@ -40,3 +41,4 @@ unsigned long timer_read_counter(void) #endif return cntpct; } +#endif -- 1.9.1

5 7

[U-Boot] [PATCH] env_mmc: avoid stack allocation for env
by Tim Harvey 02 Aug '15

02 Aug '15

Allocating space for temporary env on the stack makes env_relocate_spec() unsuitable for SPL environments which have very little stack. Signed-off-by: Tim Harvey <tharvey(a)gateworks.com> --- common/env_mmc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/common/env_mmc.c b/common/env_mmc.c index 6c4ce2f..19a28da 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -213,13 +213,19 @@ void env_relocate_spec(void) u32 offset1, offset2; int read1_fail = 0, read2_fail = 0; int crc1_ok = 0, crc2_ok = 0; - env_t *ep; + env_t *ep, *tmp_env1, *tmp_env2; int ret; int dev = CONFIG_SYS_MMC_ENV_DEV; const char *errmsg = NULL; - ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1); - ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env2, 1); + tmp_env1 = memalign(CONFIG_SYS_CACHELINE_SIZE, CONFIG_ENV_SIZE); + tmp_env2 = memalign(CONFIG_SYS_CACHELINE_SIZE, CONFIG_ENV_SIZE); + if (tmp_env1 == NULL || tmp_env2 == NULL) { + puts("Can't allocate buffers for environment\n"); + ret = 1; + errmsg = "!malloc() failed"; + goto err; + } #ifdef CONFIG_SPL_BUILD dev = 0; @@ -287,6 +293,8 @@ void env_relocate_spec(void) ret = 0; fini: + free(tmp_env1); + free(tmp_env2); fini_mmc_for_env(mmc); err: if (ret) -- 1.9.1

4 11

[U-Boot] [PATCH] integrator: switch to DM serial port
by Linus Walleij 02 Aug '15

02 Aug '15

This switches the Integrator boards over to using the device model for its serial ports. Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- ChangeLog v1->v2: - Moved CONFIG_DM and CONFIG_DM_SERIAL to Kconfig selects - Moved CONFIG_SYS_MALLOC_F_LEN to Kconfig option --- arch/arm/Kconfig | 2 ++ arch/arm/mach-integrator/Kconfig | 3 +++ board/armltd/integrator/integrator.c | 18 ++++++++++++++++++ include/configs/integrator-common.h | 5 +++++ include/configs/integratorap.h | 11 ----------- include/configs/integratorcp.h | 9 --------- 6 files changed, 28 insertions(+), 20 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3355b3bcaa58..04006176553c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -457,6 +457,8 @@ config ARCH_HIGHBANK config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" + select DM + select DM_SERIAL config ARCH_KEYSTONE bool "TI Keystone" diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index c54d69db0e42..d506ee5b39cd 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -53,4 +53,7 @@ config SYS_CONFIG_NAME default "integratorap" if ARCH_INTEGRATOR_AP default "integratorcp" if ARCH_INTEGRATOR_CP +config SYS_MALLOC_F_LEN + default 0x2000 + endmenu diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index e94ac850c751..cbe706170d0f 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -20,11 +20,29 @@ #include <common.h> #include <netdev.h> #include <asm/io.h> +#include <dm/platdata.h> +#include <dm/platform_data/serial_pl01x.h> #include "arm-ebi.h" #include "integrator-sc.h" DECLARE_GLOBAL_DATA_PTR; +static const struct pl01x_serial_platdata serial_platdata = { + .base = 0x16000000, +#ifdef CONFIG_ARCH_CINTEGRATOR + .type = TYPE_PL011, + .clock = 14745600, +#else + .type = TYPE_PL010, + .clock = 0, /* Not used for PL010 */ +#endif +}; + +U_BOOT_DEVICE(integrator_serials) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; + void peripheral_power_enable (void); #if defined(CONFIG_SHOW_BOOT_PROGRESS) diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 1d307ca1e6a8..a22efd699c17 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -20,6 +20,11 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */ +/* Serial port PL010/PL011 through the device model */ +#define CONFIG_PL01X_SERIAL +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 0 + #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_OF_LIBFDT /* enable passing a Device Tree */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index c76ebcbb60a9..26aa8cadc01d 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -21,17 +21,6 @@ #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ /* - * PL010 Configuration - */ -#define CONFIG_PL010_SERIAL -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 38400 -#define CONFIG_PL01x_PORTS { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) } -#define CONFIG_SYS_SERIAL0 0x16000000 -#define CONFIG_SYS_SERIAL1 0x17000000 - - -/* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index d6f260287534..4d04f544c815 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -28,15 +28,6 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -/* PL011 configuration */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK 14745600 -#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 } -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_SERIAL0 0x16000000 -#define CONFIG_SYS_SERIAL1 0x17000000 - /* * Command line configuration. */ -- 2.4.3

2 1

[U-Boot] [PULL] Please pull u-boot-imx
by Stefano Babic 02 Aug '15

02 Aug '15

Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846: Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to f85764cc1f6ab01ffc60dd78de9c4de4cff2b5ce: arm: mx6: tqma6: fix build for WRU-IV baseboard (2015-08-02 11:12:41 +0200) ---------------------------------------------------------------- Adrian Alonso (1): imx: imximage: add new CHECK/CLR BIT command Albert ARIBAUD $3ADEV$ (3): net: fec_mxc: remove useless struct nbuf i2c: fix vf610 support tools: mkimage: fix imximage header size Fabio Estevam (5): thermal: Fix comments power: pmic: Add support for MAX77696 PMIC warp: Add MAX77696 support mx6sabresd: Use 'int' for return values mx6sxsabresd: Use 'int' for return values Guillaume GARDET (1): mx53loco: Use generic 'load' command instead of 'fatload' Nikita Kiryanov (11): arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly arm: mx6: cm-fx6: make it possible to not init display arm: mx6: cm-fx6: add support for displaytype env var arm: mx6: cm-fx6: setup hdmi only on hdmi enable arm: mx6: cm-fx6: move CMD configs to defconfig arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6 arm: mx6: kconfig: don't select CPU_V7 per board arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option usb: kconfig: usb keyboard kconfig usb: kconfig: create a menu for usb sf: kconfig: add kconfig options for spi flashes Otavio Salvador (13): cgtqmx6eval: Use default prompt cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE cgtqmx6eval: Staticize when possible cgtqmx6eval: Improve the error handling cgtqmx6eval: Fit into single lines cgtqmx6eval: Add ESDHC3 support cgtqmx6eval: Add thermal support cgtqmx6eval: Add PMIC support cgtqmx6eval: Add USB support cgtqmx6eval: Add splash screen support cgtqmx6eval: Add SATA support cgtqmx6eval: Align DCD settings with Congatec's U-boot cgtqmx6eval: Use standard boot script Peng Fan (23): imx: mx6 remove duplicated enable_cspi_clock imx: mx6 add i2c4 clock support for i.MX6SX mmc:fsl_esdhc invalidate dcache before read imx: add cpu type for i.MX6QP/DP imx: mx6: ccm: Change the clock settings for i.MX6QP imx: mx6qp Enable PRG clock for IPU imx: mx6sabresd/sabreauto runtime setting fdt_file imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support imx: mx6ul: Add i.MX6UL CPU type imx: mx6ul: Add pins IOMUX head file imx: mx6ul: Update imx registers head file imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL imx-common: timer: add i.MX6UL support imx: mx6ul remove errata for i.MX6UL imx:mx6ul add clock support imx: mx6ul select SYS_L2CACHE_OFF imx: mx6ul update soc related settings imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL mxc: gpio add i.MX6UL support mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL imx:mx6ul add dram spl configuration and header file imx: imx6_spl add mx6ul support imx: mx6ul_14x14_evk add basic board support Peter Robinson (1): imx6: standardise OCOTP and fuse config to mx6_common Stefan Roese (1): arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM Stefano Babic (3): Merge branch 'master' of git://git.denx.de/u-boot Merge branch 'master' of git://git.denx.de/u-boot arm: mx6: tqma6: fix build for WRU-IV baseboard Tim Harvey (2): thermal:imx_thermal: enter busywait cooling loop when over max CPU temp thermal: imx_thermal: fix busywait if IMX6 temp <0C Ulises Cardenas (1): iMX: adding parsing to hab_status command Ye.Li (1): imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP arch/arm/Kconfig | 16 +- arch/arm/cpu/armv7/mx6/Kconfig | 13 +- arch/arm/cpu/armv7/mx6/clock.c | 211 ++++++++++------- arch/arm/cpu/armv7/mx6/ddr.c | 61 ++++- arch/arm/cpu/armv7/mx6/hab.c | 176 +++++++++++++- arch/arm/cpu/armv7/mx6/soc.c | 25 +- arch/arm/imx-common/cpu.c | 6 + arch/arm/imx-common/timer.c | 8 +- arch/arm/include/asm/arch-imx/cpu.h | 5 +- arch/arm/include/asm/arch-mx6/clock.h | 1 - arch/arm/include/asm/arch-mx6/crm_regs.h | 139 ++++++----- arch/arm/include/asm/arch-mx6/hab.h | 85 ++++++- arch/arm/include/asm/arch-mx6/imx-regs.h | 64 ++++-- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 45 ++++ arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 + arch/arm/include/asm/arch-mx6/mx6ul-ddr.h | 45 ++++ arch/arm/include/asm/arch-mx6/mx6ul_pins.h | 1065 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +- arch/arm/include/asm/arch-vf610/crm_regs.h | 3 + arch/arm/include/asm/arch-vf610/imx-regs.h | 3 + arch/arm/include/asm/arch-vf610/iomux-vf610.h | 11 +- arch/arm/include/asm/imx-common/iomux-v3.h | 6 + board/compulab/cm_fx6/cm_fx6.c | 86 ++++--- board/compulab/cm_fx6/spl.c | 2 +- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 353 +++++++++++++++++++++++++++- board/congatec/cgtqmx6eval/imximage.cfg | 128 +++++------ board/freescale/mx6qsabreauto/mx6qp.cfg | 145 ++++++++++++ board/freescale/mx6qsabreauto/mx6qsabreauto.c | 40 +++- board/freescale/mx6sabresd/mx6sabresd.c | 13 +- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 3 +- board/freescale/mx6ul_14x14_evk/Kconfig | 15 ++ board/freescale/mx6ul_14x14_evk/MAINTAINERS | 6 + board/freescale/mx6ul_14x14_evk/Makefile | 6 + board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 636 +++++++++++++++++++++++++++++++++++++++++++++++++++ board/tqc/tqma6/Kconfig | 5 + board/tqc/tqma6/Makefile | 1 + board/tqc/tqma6/tqma6_wru4.c | 346 ++++++++++++++++++++++++++++ board/warp/warp.c | 50 ++++ configs/cgtqmx6qeval_defconfig | 3 + configs/cm_fx6_defconfig | 20 ++ configs/mx6qpsabreauto_defconfig | 4 + configs/mx6ul_14x14_evk_defconfig | 4 + configs/tqma6s_wru4_mmc_defconfig | 13 ++ drivers/gpio/mxc_gpio.c | 4 + drivers/i2c/mxc_i2c.c | 3 +- drivers/mmc/fsl_esdhc.c | 8 + drivers/mtd/spi/Kconfig | 44 ++++ drivers/net/fec_mxc.c | 20 +- drivers/power/pmic/Makefile | 1 + drivers/power/pmic/pmic_max77696.c | 32 +++ drivers/thermal/imx_thermal.c | 18 +- drivers/usb/Kconfig | 29 +++ drivers/usb/host/Kconfig | 7 + include/configs/aristainetos-common.h | 3 - include/configs/cgtqmx6eval.h | 165 +++++++++++--- include/configs/cm_fx6.h | 17 -- include/configs/embestmx6boards.h | 5 - include/configs/gw_ventana.h | 5 - include/configs/imx6_spl.h | 2 +- include/configs/mx53loco.h | 7 +- include/configs/mx6_common.h | 10 +- include/configs/mx6cuboxi.h | 2 - include/configs/mx6qsabreauto.h | 5 - include/configs/mx6sabre_common.h | 28 ++- include/configs/mx6sabresd.h | 5 - include/configs/mx6slevk.h | 5 - include/configs/mx6sxsabresd.h | 5 - include/configs/mx6ul_14x14_evk.h | 227 ++++++++++++++++++ include/configs/nitrogen6x.h | 5 - include/configs/novena.h | 6 - include/configs/ot1200.h | 4 - include/configs/platinum.h | 4 - include/configs/tbs2910.h | 6 - include/configs/tqma6.h | 6 +- include/configs/tqma6_wru4.h | 71 ++++++ include/configs/wandboard.h | 5 - include/configs/warp.h | 13 +- include/power/max77696_pmic.h | 60 +++++ include/thermal.h | 16 +- tools/imximage.c | 95 ++++++-- tools/imximage.h | 26 ++- 81 files changed, 4299 insertions(+), 548 deletions(-) create mode 100644 arch/arm/include/asm/arch-mx6/mx6ul-ddr.h create mode 100644 arch/arm/include/asm/arch-mx6/mx6ul_pins.h create mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg create mode 100644 board/freescale/mx6ul_14x14_evk/Kconfig create mode 100644 board/freescale/mx6ul_14x14_evk/MAINTAINERS create mode 100644 board/freescale/mx6ul_14x14_evk/Makefile create mode 100644 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c create mode 100644 board/tqc/tqma6/tqma6_wru4.c create mode 100644 configs/mx6qpsabreauto_defconfig create mode 100644 configs/mx6ul_14x14_evk_defconfig create mode 100644 configs/tqma6s_wru4_mmc_defconfig create mode 100644 drivers/power/pmic/pmic_max77696.c create mode 100644 include/configs/mx6ul_14x14_evk.h create mode 100644 include/configs/tqma6_wru4.h create mode 100644 include/power/max77696_pmic.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

2 3

[U-Boot] [PATCH 00/48] Add support for running U-Boot as an EFI payload/application
by Simon Glass 02 Aug '15

02 Aug '15

This series allows U-Boot to be built as an EFI payload so that U-Boot can be started on almost any x86 platform that supports EFI. This is implemented as a stub which EFI can load plus a payload that is copied to RAM. The payload contains a normal U-Boot binary image and device tree. This allows U-Boot to run on platforms that have EFI support but are not supported natively by U-Boot. It also allows testing and fiddling with the board using U-Boots memory display and other commands. In addition, U-Boot can be built as an EFI application. This should work regardless of the board type since it only relies on EFI services. However only 32-bit EFI is supported in this case. Again it can be used to snoop around the platform. A README provides further details of how this series operates. Ben Stoltz (6): efi: Avoid using non-existent text base efi: Drop CONFIG_SYS_TEXT_BASE for EFI x86: Add support for U-Boot as an EFI application x86: Add EFI board code x86: Set up tool chain flags for running as EFI application x86: Add definitions for the x86-efi board and plumb it in Simon Glass (42): Support removing default assembler flags dm: core: Check for empty list in uclass_find_device() dm: serial: Correct logic in serial_find_console_or_panic() elf: Add a few definitions for 64-bit relocation Add a way to skip relocation Allow objcopy to work without filling gaps with 0xff Bring in __aligned_u64 and friends to linux/types.h x86: Add various minor tidy-ups to the 32-bit startup code x86: Use CR0 constants in CPU init x86: Tidy up global_data flags x86: Drop unused copy_fdt_to_ram() x86: Tidy up the 64-bit calling code x86: Add some missing global_data declarations in files that use gd x86: Tidy up a few minor issues with interrupts pci: Use debug() instead of DEBUGF() in pci_auto.c pci: Fix up code for CONFIG_PCI_ENUM_ONLY efi: Add start-up library code efi: Display the correct initcall pre-relocation values efi: Add a serial driver efi: Support building a u-boot.efi executable x86: Support skipping relocation for EFI x86: Add asm/elf.h for x86-specific ELF definitions x86: dts: Add a device tree file for EFI x86: Allow use of global_data with EFI x86: Allow relocation code to build without text base x86: Add a link script entry for U-Boot as a payload x86: Add relocation and link script for a 64-bit EFI application efi: Add support for loading U-Boot through an EFI stub x86: Support building the EFI stub x86: Add an enum for some commonly-used GDT bits x86: Add a way to call 32-bit code from 64-bit mode efi: Add 64-bit payload support x86: Add Makefile settings for EFI build x86: Add support for passing tables into U-Boot efi: Add functions for decoding the EFI tables efi: Add a command to display the memory map x86: Handle running as EFI payload x86: Add helper code for running from EFI x86: baytrail: Support operation as an EFI payload x86: qemu: Support operation as an EFI payload x86: Gracefully disable the vesa driver when running from EFI efi: Add a README to explain how things work Kconfig | 1 + Makefile | 45 ++++- arch/x86/Kconfig | 20 ++ arch/x86/Makefile | 2 + arch/x86/config.mk | 46 ++++- arch/x86/cpu/Makefile | 7 + arch/x86/cpu/baytrail/Kconfig | 2 +- arch/x86/cpu/baytrail/cpu.c | 2 + arch/x86/cpu/baytrail/valleyview.c | 2 + arch/x86/cpu/call32.S | 65 +++++++ arch/x86/cpu/call64.S | 4 +- arch/x86/cpu/cpu.c | 23 ++- arch/x86/cpu/efi/Makefile | 8 + arch/x86/cpu/efi/efi.c | 49 +++++ arch/x86/cpu/efi/elf_ia32_efi.lds | 95 +++++++++ arch/x86/cpu/efi/elf_x86_64_efi.lds | 87 +++++++++ arch/x86/cpu/efi/sdram.c | 29 +++ arch/x86/cpu/interrupts.c | 21 +- arch/x86/cpu/mp_init.c | 2 + arch/x86/cpu/qemu/Makefile | 5 +- arch/x86/cpu/qemu/qemu.c | 2 + arch/x86/cpu/start.S | 55 ++++-- arch/x86/dts/Makefile | 1 + arch/x86/dts/efi.dts | 22 +++ arch/x86/include/asm/arch-efi/gpio.h | 10 + arch/x86/include/asm/cpu.h | 19 ++ arch/x86/include/asm/elf.h | 50 +++++ arch/x86/include/asm/fsp/fsp_hob.h | 59 +----- arch/x86/include/asm/global_data.h | 16 +- arch/x86/include/asm/relocate.h | 1 - arch/x86/include/asm/types.h | 5 +- arch/x86/lib/Makefile | 23 ++- arch/x86/lib/asm-offsets.c | 1 + arch/x86/lib/bootm.c | 4 + arch/x86/lib/crt0-efi-ia32.S | 77 ++++++++ arch/x86/lib/crt0-efi-x86_64.S | 77 ++++++++ arch/x86/lib/efi/Makefile | 9 + arch/x86/lib/efi/car.S | 12 ++ arch/x86/lib/efi/efi.c | 151 +++++++++++++++ arch/x86/lib/fsp/fsp_common.c | 2 + arch/x86/lib/lpc-uclass.c | 2 + arch/x86/lib/pch-uclass.c | 2 + arch/x86/lib/reloc_ia32.c | 96 ++++++++++ arch/x86/lib/reloc_x86_64.c | 90 +++++++++ arch/x86/lib/relocate.c | 43 ++--- board/efi/Kconfig | 19 ++ board/efi/efi-x86/Kconfig | 27 +++ board/efi/efi-x86/MAINTAINERS | 6 + board/efi/efi-x86/Makefile | 7 + board/efi/efi-x86/efi.c | 18 ++ board/emulation/qemu-x86/Kconfig | 5 +- board/intel/minnowmax/Kconfig | 5 +- common/Makefile | 1 + common/board_f.c | 14 +- common/cmd_efi.c | 258 +++++++++++++++++++++++++ config.mk | 2 - configs/efi-x86_defconfig | 16 ++ doc/README.efi | 237 +++++++++++++++++++++++ drivers/core/uclass.c | 2 + drivers/gpio/intel_ich6_gpio.c | 2 + drivers/pci/pci_auto.c | 52 ++--- drivers/serial/Kconfig | 8 + drivers/serial/Makefile | 1 + drivers/serial/serial-uclass.c | 2 +- drivers/serial/serial_efi.c | 149 +++++++++++++++ drivers/video/vesa_fb.c | 8 + include/asm-generic/global_data.h | 1 + include/common.h | 7 + include/configs/efi-x86.h | 37 ++++ include/efi.h | 360 +++++++++++++++++++++++++++++++++++ include/efi_api.h | 252 ++++++++++++++++++++++++ include/elf.h | 26 +++ include/linux/types.h | 6 +- include/part_efi.h | 9 +- lib/Kconfig | 2 + lib/Makefile | 1 + lib/efi/Kconfig | 54 ++++++ lib/efi/Makefile | 17 ++ lib/efi/efi.c | 91 +++++++++ lib/efi/efi_app.c | 125 ++++++++++++ lib/efi/efi_info.c | 47 +++++ lib/efi/efi_stub.c | 341 +++++++++++++++++++++++++++++++++ lib/initcall.c | 4 + scripts/Makefile.build | 8 + scripts/Makefile.lib | 3 +- 85 files changed, 3395 insertions(+), 179 deletions(-) create mode 100644 arch/x86/cpu/call32.S create mode 100644 arch/x86/cpu/efi/Makefile create mode 100644 arch/x86/cpu/efi/efi.c create mode 100644 arch/x86/cpu/efi/elf_ia32_efi.lds create mode 100644 arch/x86/cpu/efi/elf_x86_64_efi.lds create mode 100644 arch/x86/cpu/efi/sdram.c create mode 100644 arch/x86/dts/efi.dts create mode 100644 arch/x86/include/asm/arch-efi/gpio.h create mode 100644 arch/x86/include/asm/elf.h create mode 100644 arch/x86/lib/crt0-efi-ia32.S create mode 100644 arch/x86/lib/crt0-efi-x86_64.S create mode 100644 arch/x86/lib/efi/Makefile create mode 100644 arch/x86/lib/efi/car.S create mode 100644 arch/x86/lib/efi/efi.c create mode 100644 arch/x86/lib/reloc_ia32.c create mode 100644 arch/x86/lib/reloc_x86_64.c create mode 100644 board/efi/Kconfig create mode 100644 board/efi/efi-x86/Kconfig create mode 100644 board/efi/efi-x86/MAINTAINERS create mode 100644 board/efi/efi-x86/Makefile create mode 100644 board/efi/efi-x86/efi.c create mode 100644 common/cmd_efi.c create mode 100644 configs/efi-x86_defconfig create mode 100644 doc/README.efi create mode 100644 drivers/serial/serial_efi.c create mode 100644 include/configs/efi-x86.h create mode 100644 include/efi.h create mode 100644 include/efi_api.h create mode 100644 lib/efi/Kconfig create mode 100644 lib/efi/Makefile create mode 100644 lib/efi/efi.c create mode 100644 lib/efi/efi_app.c create mode 100644 lib/efi/efi_info.c create mode 100644 lib/efi/efi_stub.c -- 2.4.3.573.g4eafbef

4 111

[U-Boot] [PATCH 00/12] cm-fx6 and kconfig updates
by Nikita Kiryanov 02 Aug '15

02 Aug '15

This series includes some fixes for cm-fx6, as well as migrating of cm-fx6 config options to the defconfig file. In the process of migrating the config #defines, new entries are added to menuconfig. Cc: Stefano Babic <sbabic(a)denx.de> Cc: Igor Grinberg <grinberg(a)compulab.co.il> Nikita Kiryanov (12): arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly arm: mx6: cm-fx6: make it possible to not init display arm: mx6: cm-fx6: add support for displaytype env var arm: mx6: cm-fx6: setup hdmi only on hdmi enable arm: mx6: cm-fx6: move CMD configs to defconfig arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6 arm: mx6: kconfig: don't select CPU_V7 per board arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option usb: kconfig: usb keyboard kconfig usb: kconfig: create a menu for usb sf: kconfig: add kconfig options for spi flashes kconfig: add config option for shell prompt arch/arm/Kconfig | 8 ---- arch/arm/cpu/armv7/mx6/Kconfig | 9 ++++- board/compulab/cm_fx6/cm_fx6.c | 86 +++++++++++++++++++++++++++--------------- common/Kconfig | 7 ++++ configs/cm_fx6_defconfig | 21 +++++++++++ drivers/mtd/spi/Kconfig | 44 +++++++++++++++++++++ drivers/usb/Kconfig | 29 ++++++++++++++ drivers/usb/host/Kconfig | 7 ++++ include/configs/cm_fx6.h | 18 --------- 9 files changed, 171 insertions(+), 58 deletions(-) -- 1.9.1

7 50

[U-Boot] [PATCH V5 1/6] imx: add cpu type for i.MX6QP/DP
by Peng Fan 02 Aug '15

02 Aug '15

Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> Acked-by: Stefano Babic <sbabic(a)denx.de> --- Changes v5: Refine commit msg Add Stefano's Acked-by Changes v4: Address Fabio's comments, Change Quad-Plus to Dual-Plus for i.MX6DP. Changes v3: New patch This patch is to make print_cpuinfo display correct cpu info,and fix is_mx6dqp Changes v2: none arch/arm/cpu/armv7/mx6/soc.c | 11 +++++++++-- arch/arm/imx-common/cpu.c | 4 ++++ arch/arm/include/asm/arch-imx/cpu.h | 2 ++ arch/arm/include/asm/arch-mx6/sys_proto.h | 4 +--- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 29de624..d3a3b2e 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -62,12 +62,12 @@ u32 get_cpu_rev(void) struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; u32 reg = readl(&anatop->digprog_sololite); u32 type = ((reg >> 16) & 0xff); - u32 major; + u32 major, cfg = 0; if (type != MXC_CPU_MX6SL) { reg = readl(&anatop->digprog); struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; - u32 cfg = readl(&scu->config) & 3; + cfg = readl(&scu->config) & 3; type = ((reg >> 16) & 0xff); if (type == MXC_CPU_MX6DL) { if (!cfg) @@ -81,6 +81,13 @@ u32 get_cpu_rev(void) } major = ((reg >> 8) & 0xff); + if ((major >= 1) && + ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) { + major--; + type = MXC_CPU_MX6QP; + if (cfg == 1) + type = MXC_CPU_MX6DP; + } reg &= 0xff; /* mx6 silicon revision */ return (type << 12) | (reg + (0x10 * (major + 1))); } diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 5e56cfe..096d22e 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -122,6 +122,10 @@ unsigned imx_ddr_size(void) const char *get_imx_type(u32 imxtype) { switch (imxtype) { + case MXC_CPU_MX6QP: + return "6QP"; /* Quad-Plus version of the mx6 */ + case MXC_CPU_MX6DP: + return "6DP"; /* Dual-Plus version of the mx6 */ case MXC_CPU_MX6Q: return "6Q"; /* Quad-core version of the mx6 */ case MXC_CPU_MX6D: diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 4715f4e..99e0e32 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -12,6 +12,8 @@ #define MXC_CPU_MX6Q 0x63 #define MXC_CPU_MX6D 0x64 #define MXC_CPU_MX6SOLO 0x65 /* dummy ID */ +#define MXC_CPU_MX6DP 0x68 +#define MXC_CPU_MX6QP 0x69 #define CS0_128 0 #define CS0_64M_CS1_64M 1 diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 28c77a4..eee8ca8 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -30,9 +30,7 @@ const char *get_imx_type(u32 imxtype); unsigned imx_ddr_size(void); void set_chipselect_size(int const); -#define is_mx6dqp() ((is_cpu_type(MXC_CPU_MX6Q) || \ - is_cpu_type(MXC_CPU_MX6D)) && \ - (soc_rev() >= CHIP_REV_2_0)) +#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) /* * Initializes on-chip ethernet controllers. -- 1.8.4

2 11

[U-Boot] [PATCH 00/16] Add macros to ease our life with independent CONFIGs between U-Boot and SPL
by Masahiro Yamada 01 Aug '15

01 Aug '15

Refer to Simon's question, too: http://lists.denx.de/pipermail/u-boot/2015-July/219598.html Since U-boot introduced SPL (not since Kconfig), enabling features for U-boot and SPL independently is always a PITA. - decide if each feature should be supported for SPL or not - Add CONFIG_SPL_FRED_SUPPORT into Makefile.spl - Add #undef include/config_uncmd_spl.h to disable features we do not want to support on SPL - Add "ifdef CONFIG_SPL_BUILD ... endif" here and there to adjust things - Add "#ifdef CONFIG_SPL_BUILD ... #endif" here and there to fix things up Things are getting more and more crappy. When U-boot switched to Kconfig, first I introduced separate .config (.config, spl/.config, tpl/.config) to clean up them. But it turned out to be a pain. So, I believe the current single .config is much better. But I also admit we need something systematic to subdue our PITA. One possibility is to support "spl-y" in makefiles. (This idea is cribbed from barebox.) obj-$(CONFIG_FOO) += foo.o spl-$(CONFIG_SPL_FOO) += foo.o is cleaner than ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FOO) += foo.o else obj-$(CONFIG_FOO) += foo.o endif It is a nice improvement in makefile side. But we still need to do something with C files. Another option is something like CONFIG_FOO=yyn (yes for U-boot, yes for SPL, no for TPL) To achieve this, I think a big operation is needed in Kconfig core. I cannot do that. (Of course, Patches are welcome if someone else can do that.) So, I was thinking of something different. My idea was inspired by IS_ENABLED() macro in include/linux/kconfig.h. Linux defines different macros for built-in and module, and it is possible to write #if IS_ENABLED(CONFIG_FOO) ... #endif instead of #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) ... #endif So, I'd like to propose new macros to write code like #if CONFIG_IS_ENABLED(FOO) ... #endif instead of #if (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_FOO)) || \ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_FOO)) ... #endif I hope this series will make our life easier. Masahiro Yamada (16): ARM: remove vpac270 board support kbuild: fixdep: optimize code slightly kbuild: add a makefile macro useful with per-image config options linux/kconfig.h: add CPP macros useful for per-image config options spl: move SPL driver entries to driver/Makefile dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list fdtdec: fix OF_CONTROL switch of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL of: clean up OF_CONTROL ifdef conditionals arch/arm/Kconfig | 10 - arch/arm/cpu/armv7/am33xx/board.c | 2 +- arch/arm/cpu/armv7/exynos/Kconfig | 8 - arch/arm/cpu/armv7/exynos/pinmux.c | 2 +- arch/arm/cpu/armv7/s5pc1xx/Kconfig | 2 - arch/arm/include/asm/arch-exynos/dwmmc.h | 2 - arch/arm/include/asm/arch-exynos/mipi_dsim.h | 2 - arch/arm/include/asm/arch-exynos/mmc.h | 2 - arch/arm/mach-tegra/clock.c | 4 +- arch/arm/mach-tegra/tegra114/clock.c | 4 +- arch/arm/mach-tegra/tegra124/clock.c | 4 +- arch/arm/mach-tegra/tegra20/clock.c | 4 +- arch/arm/mach-tegra/tegra30/clock.c | 4 +- board/vpac270/Kconfig | 9 - board/vpac270/MAINTAINERS | 8 - board/vpac270/Makefile | 13 - board/vpac270/onenand.c | 46 --- board/vpac270/u-boot-spl.lds | 81 ----- board/vpac270/vpac270.c | 126 -------- .../xilinx/microblaze-generic/microblaze-generic.c | 2 +- board/xilinx/zynq/board.c | 2 +- common/cli.c | 4 +- common/spl/spl.c | 3 +- configs/am335x_boneblack_vboot_defconfig | 1 - configs/arches_defconfig | 1 - configs/canyonlands_defconfig | 1 - configs/galileo_defconfig | 1 - configs/microblaze-generic_defconfig | 1 - configs/odroid_defconfig | 1 - configs/origen_defconfig | 1 - configs/s5pc210_universal_defconfig | 1 - configs/socfpga_socrates_defconfig | 1 - configs/trats2_defconfig | 1 - configs/trats_defconfig | 1 - configs/vpac270_nor_128_defconfig | 5 - configs/vpac270_nor_256_defconfig | 5 - configs/vpac270_ond_256_defconfig | 7 - doc/README.scrapyard | 1 + drivers/Makefile | 41 ++- drivers/clk/Kconfig | 2 +- drivers/core/Makefile | 8 +- drivers/core/device.c | 10 +- drivers/core/lists.c | 2 +- drivers/core/root.c | 6 +- drivers/core/uclass.c | 4 +- drivers/gpio/mxc_gpio.c | 2 +- drivers/gpio/vybrid_gpio.c | 2 +- drivers/i2c/s3c24x0_i2c.c | 4 +- drivers/input/Makefile | 3 +- drivers/input/tegra-kbc.c | 2 +- drivers/led/Kconfig | 2 +- drivers/mmc/exynos_dw_mmc.c | 2 +- drivers/mmc/s5p_sdhci.c | 2 +- drivers/mmc/tegra_mmc.c | 2 +- drivers/mmc/zynq_sdhci.c | 2 +- drivers/mtd/spi/sf_probe.c | 6 +- drivers/net/xilinx_emaclite.c | 2 +- drivers/net/zynq_gem.c | 2 +- drivers/power/exynos-tmu.c | 2 +- drivers/power/pmic/pmic_max77686.c | 4 +- drivers/ram/Kconfig | 2 +- drivers/serial/ns16550.c | 2 +- drivers/serial/serial-uclass.c | 4 +- drivers/serial/serial_omap.c | 2 +- drivers/serial/serial_pl01x.c | 2 +- drivers/serial/serial_tegra.c | 4 +- drivers/serial/serial_uniphier.c | 2 +- drivers/serial/serial_zynq.c | 2 +- drivers/sound/max98095.c | 2 +- drivers/sound/wm8994.c | 2 +- drivers/tpm/tpm_tis_i2c.c | 2 +- drivers/video/exynos_dp.c | 4 +- drivers/video/exynos_dp_lowlevel.c | 2 +- drivers/video/exynos_fb.c | 8 +- drivers/video/exynos_fimd.c | 4 +- drivers/video/exynos_mipi_dsi.c | 4 +- drivers/video/tegra.c | 2 +- dts/Kconfig | 6 +- include/cli.h | 2 +- include/config_uncmd_spl.h | 4 - include/configs/microblaze-generic.h | 3 +- include/configs/socfpga_common.h | 2 +- include/configs/vpac270.h | 326 --------------------- include/dm/device-internal.h | 10 +- include/dm/device.h | 4 +- include/dm/uclass-internal.h | 4 +- include/fdtdec.h | 10 - include/linux/kconfig.h | 48 +++ lib/Makefile | 13 +- lib/fdtdec.c | 4 +- scripts/Kbuild.include | 6 + scripts/Makefile.spl | 30 +- scripts/Makefile.uncmd_spl | 5 - scripts/basic/fixdep.c | 33 ++- 94 files changed, 227 insertions(+), 818 deletions(-) delete mode 100644 board/vpac270/Kconfig delete mode 100644 board/vpac270/MAINTAINERS delete mode 100644 board/vpac270/Makefile delete mode 100644 board/vpac270/onenand.c delete mode 100644 board/vpac270/u-boot-spl.lds delete mode 100644 board/vpac270/vpac270.c delete mode 100644 configs/vpac270_nor_128_defconfig delete mode 100644 configs/vpac270_nor_256_defconfig delete mode 100644 configs/vpac270_ond_256_defconfig delete mode 100644 include/configs/vpac270.h -- 1.9.1

5 31

[U-Boot] Please pull u-boot-mpc85xx master
by York Sun 01 Aug '15

01 Aug '15

Tom, The following changes since commit 26473945ad6667183296e7edee2a65edf31bb6f7: Merge branch 'master' of http://git.denx.de/u-boot-sunxi (2015-07-25 09:04:18 -0400) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master for you to fetch changes up to f2af1c37a09cdd28a78fde4ee4275aedf59be620: powerpc/T104xRDB: Remove vbank check redundant code (2015-07-31 08:56:11 -0700) ---------------------------------------------------------------- Aneesh Bansal (3): powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040 powerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAM Jaiprakash Singh (1): powerpc/T102xRDB: Enable ifc nand ecc encode and decode Nikhil Badola (1): powerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUNT for p1025 Priyanka Jain (3): powerpc/T104xD4RDB: Add T104xD4RDB boards support powerpc/t104x, t102x: Update CPC debug register value in PBI commands powerpc/T104xRDB: Remove vbank check redundant code Raghav Dogra (1): powerpc/b4860qds: Update README for DIP switch information Shaohui Xie (2): powerpc/t4rdb: fix cpld reset altbank powerpc/t4240: update serdes table Shengzhou Liu (3): powerpc/t1024: update fman liodn for mac1 powerpc/t1023rdb: add support for T1023RDB RevC powerpc/t1023rdb: eMMC boot without external SD card Ying Zhang (1): powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issue gaurav rana (1): powerpc/T104xD4: Add Secure boot support for T104xD4RDB platforms Makefile | 4 + arch/powerpc/cpu/mpc85xx/start.S | 11 +++ arch/powerpc/cpu/mpc85xx/t1024_ids.c | 3 +- arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 103 +++++++++---------- arch/powerpc/include/asm/config_mpc85xx.h | 3 +- arch/powerpc/include/asm/fsl_liodn.h | 6 ++ arch/powerpc/include/asm/fsl_secure_boot.h | 21 ++++ board/freescale/common/p_corenet/tlb.c | 15 +++ board/freescale/corenet_ds/MAINTAINERS | 7 ++ board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 15 ++- board/freescale/t102xqds/t1024_pbi.cfg | 2 +- board/freescale/t102xrdb/README | 18 ++-- board/freescale/t102xrdb/spl.c | 24 +++++ board/freescale/t102xrdb/t1023_rcw.cfg | 2 +- board/freescale/t102xrdb/t1024_pbi.cfg | 2 +- board/freescale/t102xrdb/t102xrdb.c | 141 ++++++++++++++++++++------- board/freescale/t102xrdb/t102xrdb.h | 3 +- board/freescale/t1040qds/t1040_pbi.cfg | 2 +- board/freescale/t104xrdb/MAINTAINERS | 10 ++ board/freescale/t104xrdb/README | 87 ++++++++++++++++- board/freescale/t104xrdb/cpld.c | 4 + board/freescale/t104xrdb/cpld.h | 6 ++ board/freescale/t104xrdb/ddr.c | 10 ++ board/freescale/t104xrdb/ddr.h | 9 +- board/freescale/t104xrdb/eth.c | 20 +++- board/freescale/t104xrdb/t1040d4_rcw.cfg | 7 ++ board/freescale/t104xrdb/t1042d4_rcw.cfg | 7 ++ board/freescale/t104xrdb/t104x_pbi.cfg | 2 +- board/freescale/t104xrdb/t104xrdb.c | 37 ++++++- board/freescale/t4rdb/cpld.c | 8 +- configs/P3041DS_NAND_SECURE_BOOT_defconfig | 5 + configs/P5020DS_NAND_SECURE_BOOT_defconfig | 5 + configs/P5040DS_NAND_SECURE_BOOT_defconfig | 5 + configs/T1040D4RDB_NAND_defconfig | 6 ++ configs/T1040D4RDB_SDCARD_defconfig | 6 ++ configs/T1040D4RDB_SECURE_BOOT_defconfig | 5 + configs/T1040D4RDB_SPIFLASH_defconfig | 6 ++ configs/T1040D4RDB_defconfig | 5 + configs/T1042D4RDB_NAND_defconfig | 6 ++ configs/T1042D4RDB_SDCARD_defconfig | 6 ++ configs/T1042D4RDB_SECURE_BOOT_defconfig | 5 + configs/T1042D4RDB_SPIFLASH_defconfig | 6 ++ configs/T1042D4RDB_defconfig | 5 + doc/README.b4860qds | 2 +- include/config_fsl_secboot.h | 29 +++++- include/configs/T102xRDB.h | 19 ++-- include/configs/T104xRDB.h | 64 ++++++++++-- include/configs/corenet_ds.h | 9 ++ 48 files changed, 631 insertions(+), 152 deletions(-) create mode 100644 board/freescale/t104xrdb/t1040d4_rcw.cfg create mode 100644 board/freescale/t104xrdb/t1042d4_rcw.cfg create mode 100644 configs/P3041DS_NAND_SECURE_BOOT_defconfig create mode 100644 configs/P5020DS_NAND_SECURE_BOOT_defconfig create mode 100644 configs/P5040DS_NAND_SECURE_BOOT_defconfig create mode 100644 configs/T1040D4RDB_NAND_defconfig create mode 100644 configs/T1040D4RDB_SDCARD_defconfig create mode 100644 configs/T1040D4RDB_SECURE_BOOT_defconfig create mode 100644 configs/T1040D4RDB_SPIFLASH_defconfig create mode 100644 configs/T1040D4RDB_defconfig create mode 100644 configs/T1042D4RDB_NAND_defconfig create mode 100644 configs/T1042D4RDB_SDCARD_defconfig create mode 100644 configs/T1042D4RDB_SECURE_BOOT_defconfig create mode 100644 configs/T1042D4RDB_SPIFLASH_defconfig create mode 100644 configs/T1042D4RDB_defconfig Thanks. York

2 1