From: Raul Cardenas <Ulises.Cardenas(a)freescale.com>
Freescale's SEC block has built-in Data Encryption
Key(DEK) Blob Protocol which provides a method for
protecting a DEK for non-secure memory storage.
SEC block protects data in a data structure called
a Secret Key Blob, which provides both confidentiality
and integrity protection.
Every time the blob encapsulation is executed,
a SHA-256 key is randomly generated to encrypt the DEK.
This key is itself encrypted with the OTP Secret key
from SoC. The ending blob consists of the encrypted
SHA-256 key, the encrypted DEK, and a 16-bit MAC.
During decapsulation, the reverse process is performed
to get back the original DEK. A caveat to the blob
decapsulation process, is that the DEK is decrypted
in secure-memory and can only be read by FSL SEC HW.
The DEK is used to decrypt data during encrypted boot.
Commands added
--------------
dek_blob - encapsulating DEK as a cryptgraphic blob
Commands Syntax
---------------
dek_blob src dst len
Encapsulate and create blob of a len-bits DEK at
address src and store the result at address dst.
Signed-off-by: Raul Cardenas <Ulises.Cardenas(a)freescale.com>
Signed-off-by: Nitin Garg <nitin.garg(a)freescale.com>
---
Changes in v3:
-Improve cache management for relevant descriptors
-Add cache management to RNG instantiate
Changes in v2:
-Remove weak symbol as recommended by Ruchika
arch/arm/imx-common/Makefile | 1 +
arch/arm/imx-common/cmd_dek.c | 89 +++++++++++++++++++
arch/arm/imx-common/timer.c | 17 ++++
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +
doc/README.mxc_hab | 48 ++++++++++
drivers/crypto/fsl/Makefile | 2 +-
drivers/crypto/fsl/desc.h | 15 ++++
drivers/crypto/fsl/fsl_blob.c | 50 +++++++++++
drivers/crypto/fsl/jobdesc.c | 142 +++++++++++++++++++++++++++++-
drivers/crypto/fsl/jobdesc.h | 5 ++
drivers/crypto/fsl/jr.c | 31 ++++++-
include/fsl_sec.h | 60 +++++++++++++
12 files changed, 457 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/imx-common/cmd_dek.c
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 25a9d4c..606482f 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
endif
obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
+obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
quiet_cmd_cpp_cfg = CFGS $@
cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
diff --git a/arch/arm/imx-common/cmd_dek.c b/arch/arm/imx-common/cmd_dek.c
new file mode 100644
index 0000000..1a3a996a
--- /dev/null
+++ b/arch/arm/imx-common/cmd_dek.c
@@ -0,0 +1,89 @@
+/*
+ * Command for encapsulating DEK blob
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <linux/compiler.h>
+#include <fsl_sec.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+* blob_dek() - Encapsulate the DEK as a blob using CAM's Key
+* @src: - Address of data to be encapsulated
+* @dst: - Address of data to be encapsulated
+* @len: - Size of data to be encapsulated
+*
+* Returns zero on success,and negative on error.
+*/
+static int blob_encap_dek(u8 *src, u8 *dst, u32 len)
+{
+ int ret = 0;
+ u32 jr_size = 4;
+
+ u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR + 0x102c);
+ if (out_jr_size != jr_size) {
+ hab_caam_clock_enable(1);
+ sec_init();
+ }
+
+ if (!((len == 128)|(len == 192)|(len == 256))) {
+ debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
+ return -1;
+ }
+
+ len /= 8;
+ ret = blob_dek(src, dst, len);
+
+ return ret;
+}
+
+/**
+ * do_dek_blob() - Handle the "dek_blob" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_dek_blob(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ uint32_t src_addr, dst_addr, len;
+ uint8_t *src_ptr, *dst_ptr;
+ int ret = 0;
+
+ if (argc != 4)
+ return CMD_RET_USAGE;
+
+ src_addr = simple_strtoul(argv[1], NULL, 16);
+ dst_addr = simple_strtoul(argv[2], NULL, 16);
+ len = simple_strtoul(argv[3], NULL, 10);
+
+ src_ptr = (uint8_t *)src_addr;
+ dst_ptr = (uint8_t *)dst_addr;
+
+ ret = blob_encap_dek(src_ptr, dst_ptr, len);
+
+ return ret;
+}
+
+/***************************************************/
+static char dek_blob_help_text[] =
+ "src dst len - Encapsulate and create blob of data\n"
+ " $len bits long at address $src and\n"
+ " store the result at address $dst.\n";
+
+U_BOOT_CMD(
+ dek_blob, 4, 1, do_dek_blob,
+ "Data Encryption Key blob encapsulation",
+ dek_blob_help_text
+);
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 65ef60b..e522990 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -176,3 +176,20 @@ ulong get_tbclk(void)
{
return gpt_get_clk();
}
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+ ulong ticks;
+
+ if (usec < 1000)
+ ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+ else
+ ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+ return ticks;
+}
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index ae88b6e..065b27b 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -215,6 +215,10 @@
#define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000)
#define CAAM_BASE_ADDR (ATZ2_BASE_ADDR)
#define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000)
+
+#define CONFIG_SYS_FSL_SEC_ADDR (CAAM_BASE_ADDR)
+#define CONFIG_SYS_FSL_JR0_ADDR (CAAM_BASE_ADDR + 0x1000)
+
#define USB_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000)
#define USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000)
diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
index 43e64a2..46ed0df 100644
--- a/doc/README.mxc_hab
+++ b/doc/README.mxc_hab
@@ -46,3 +46,51 @@ cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
NOTE: U-Boot_CSF.bin needs to be padded to the value specified in
the imximage.cfg file.
+
+Setup U-Boot Image for Encrypted Boot
+-------------------------------------
+An authenticated U-boot image is used as starting point for
+Encrypted Boot. The image is encrypted by Freescale's Code
+Signing Tool (CST). The CST replaces only the image data of
+u-boot.imx with the encrypted data. The Initial Vector Table,
+DCD, and Boot data, remains in plaintext.
+
+The image data is encrypted with a Encryption Key (DEK).
+Therefore, this key is needed to decrypt the data during the
+booting process. The DEK is protected by wrapping it in a Blob,
+which needs to be appended to the U-boot image and specified in
+the CSF file.
+
+The DEK blob is generated by an authenticated U-boot image with
+the dek_blob cmd enabled. The image used for DEK blob generation
+needs to have the following configurations enabled:
+
+CONFIG_SECURE_BOOT
+CONFIG_SYS_FSL_SEC_COMPAT 4 /* HAB version */
+CONFIG_FSL_CAAM
+CONFIG_CMD_DEKBLOB
+
+Note: The encrypted boot feature is only supported by HABv4 or
+greater.
+
+The dek_blob command then can be used to generate the DEK blob of
+a DEK previously loaded in memory. The command is used as follows:
+
+dek_blob <DEK address> <Output Address> <Key Size in Bits>
+example: dek_blob 0x10800000 0x10801000 192
+
+The resulting DEK blob then is used to construct the encrypted
+U-boot image. Note that the blob needs to be transfered back
+to the host.Then the following commands are used to construct
+the final image.
+
+objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \
+ U-Boot_CSF.bin U-Boot_CSF_pad.bin
+cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
+objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
+ u-boot-signed.imx u-boot-signed-pad.bin
+cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
+
+ NOTE: u-boot-signed.bin needs to be padded to the value
+ equivalent to the address in which the DEK blob is specified
+ in the CSF.
diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile
index c0cf642..4aa91e4 100644
--- a/drivers/crypto/fsl/Makefile
+++ b/drivers/crypto/fsl/Makefile
@@ -8,5 +8,5 @@
obj-y += sec.o
obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o
-obj-$(CONFIG_CMD_BLOB) += fsl_blob.o
+obj-$(CONFIG_CMD_BLOB)$(CONFIG_CMD_DEKBLOB) += fsl_blob.o
obj-$(CONFIG_RSA_FREESCALE_EXP) += fsl_rsa.o
diff --git a/drivers/crypto/fsl/desc.h b/drivers/crypto/fsl/desc.h
index 504f2b0..bb82734 100644
--- a/drivers/crypto/fsl/desc.h
+++ b/drivers/crypto/fsl/desc.h
@@ -12,11 +12,18 @@
#ifndef DESC_H
#define DESC_H
+#define KEY_BLOB_SIZE 32
+#define MAC_SIZE 16
+
/* Max size of any CAAM descriptor in 32-bit words, inclusive of header */
#define MAX_CAAM_DESCSIZE 64
+/* Size of DEK Blob descriptor, inclusive of header */
+#define DEK_BLOB_DESCSIZE 9
+
/* Block size of any entity covered/uncovered with a KEK/TKEK */
#define KEK_BLOCKSIZE 16
+
/*
* Supported descriptor command types as they show up
* inside a descriptor command word.
@@ -273,6 +280,13 @@
#define LDLEN_SET_OFIFO_OFFSET_MASK (3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
/*
+ * AAD Definitions
+ */
+#define AES_KEY_SHIFT 8
+#define LD_CCM_MODE (0x66)
+#define KEY_AES_SRC (0x55 << AES_KEY_SHIFT)
+
+/*
* FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
* Command Constructs
*/
@@ -418,6 +432,7 @@
#define OP_PCLID_MASK (0xff << 16)
/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_SECMEM (0x08)
#define OP_PCLID_BLOB (0x0d << OP_PCLID_SHIFT)
#define OP_PCLID_SECRETKEY (0x11 << OP_PCLID_SHIFT)
#define OP_PCLID_PUBLICKEYPAIR (0x14 << OP_PCLID_SHIFT)
diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
index bc01075..f9dc85a 100644
--- a/drivers/crypto/fsl/fsl_blob.c
+++ b/drivers/crypto/fsl/fsl_blob.c
@@ -7,6 +7,7 @@
#include <common.h>
#include <malloc.h>
+#include <fsl_sec.h>
#include "jobdesc.h"
#include "desc.h"
#include "jr.h"
@@ -59,3 +60,52 @@ int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
free(desc);
return ret;
}
+
+#ifdef CONFIG_CMD_DEKBLOB
+int blob_dek(u8 *src, u8 *dst, u8 len)
+{
+ int ret, size, i = 0;
+ u32 *desc;
+
+ int out_sz = WRP_HDR_SIZE + len + KEY_BLOB_SIZE + MAC_SIZE;
+
+ puts("\nEncapsulating provided DEK to form blob\n");
+ desc = memalign(ARCH_DMA_MINALIGN,
+ sizeof(uint32_t) * DEK_BLOB_DESCSIZE);
+ if (!desc) {
+ debug("Not enough memory for descriptor allocation\n");
+ return -1;
+ }
+
+ ret = inline_cnstr_jobdesc_blob_dek(desc, src, dst, len);
+ if (ret) {
+ debug("Error in Job Descriptor Construction: %d\n", ret);
+ } else {
+ size = roundup(sizeof(uint32_t) * DEK_BLOB_DESCSIZE,
+ ARCH_DMA_MINALIGN);
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + size);
+ size = roundup(sizeof(uint8_t) * out_sz, ARCH_DMA_MINALIGN);
+ flush_dcache_range((unsigned long)dst,
+ (unsigned long)dst + size);
+
+ ret = run_descriptor_jr(desc);
+ }
+
+ if (ret)
+ debug("Error in Encapsulation %d\n", ret);
+
+ size = roundup(out_sz, ARCH_DMA_MINALIGN);
+ invalidate_dcache_range((unsigned long)dst, (unsigned long)dst+size);
+
+ /* Print DEK Blob */
+ puts("DEK Blob\n");
+ for (i = 0; i < out_sz; i++)
+ printf("%02X", ((uint8_t *)dst)[i]);
+
+ puts("\n\n");
+
+ free(desc);
+ return ret;
+}
+#endif
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
index cc0dced..4dc73ae 100644
--- a/drivers/crypto/fsl/jobdesc.c
+++ b/drivers/crypto/fsl/jobdesc.c
@@ -9,12 +9,150 @@
*/
#include <common.h>
+#include <fsl_sec.h>
#include "desc_constr.h"
#include "jobdesc.h"
#include "rsa_caam.h"
-#define KEY_BLOB_SIZE 32
-#define MAC_SIZE 16
+#ifdef CONFIG_MX6
+/*!
+ * Secure memory run command.
+ *
+ * @param sec_mem_cmd Secure memory command register
+ * @return cmd_status Secure memory command status register
+ */
+uint32_t secmem_set_cmd(uint32_t sec_mem_cmd)
+{
+ uint32_t temp_reg;
+
+ sec_out32(CAAM_SMCJR0, sec_mem_cmd);
+
+ do {
+ temp_reg = sec_in32(CAAM_SMCSJR0);
+ } while (temp_reg & CMD_COMPLETE);
+
+ return temp_reg;
+}
+
+/*!
+ * CAAM page allocation.
+ *
+ * @param page Number of the page to allocate.
+ * @param partition Number of the partition to allocate.
+ */
+uint32_t caam_page_alloc(uint8_t page_num, uint8_t partition_num)
+{
+ uint32_t temp_reg;
+
+ /*
+ * De-Allocate partition_num if already allocated to ARM core
+ */
+ if (sec_in32(CAAM_SMPO_0) & PARTITION_OWNER(partition_num)) {
+ temp_reg = secmem_set_cmd(PARTITION(partition_num) |
+ CMD_PART_DEALLOC);
+ if (temp_reg & SMCSJR_AERR) {
+ printf("Error: De-allocation status 0x%X\n", temp_reg);
+ return ERROR_IN_PAGE_ALLOC;
+ }
+ }
+
+ /* set the access rights to allow full access */
+ sec_out32(CAAM_SMAG1JR0(partition_num), 0xF);
+ sec_out32(CAAM_SMAG2JR0(partition_num), 0xF);
+ sec_out32(CAAM_SMAPJR0(partition_num), 0xFF);
+
+ /* Now need to allocate partition_num of secure RAM. */
+ /* De-Allocate page_num by starting with a page inquiry command */
+ temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
+
+ /* if the page is owned, de-allocate it */
+ if ((temp_reg & SMCSJR_PO) == PAGE_OWNED) {
+ temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_PAGE_DEALLOC);
+ if (temp_reg & SMCSJR_AERR) {
+ printf("Error: Allocation status 0x%X\n", temp_reg);
+ return ERROR_IN_PAGE_ALLOC;
+ }
+ }
+
+ /* Allocate page_num to partition_num */
+ temp_reg = secmem_set_cmd(PAGE(page_num) | PARTITION(partition_num)
+ | CMD_PAGE_ALLOC);
+ if (temp_reg & SMCSJR_AERR) {
+ printf("Error: Allocation status 0x%X\n", temp_reg);
+ return ERROR_IN_PAGE_ALLOC;
+ }
+ /* page inquiry command to ensure that the page was allocated */
+ temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
+
+ /* if the page is not owned => problem */
+ if ((temp_reg & SMCSJR_PO) != PAGE_OWNED) {
+ printf("Allocation of page %d in partition %d failed 0x%X\n",
+ temp_reg, page_num, partition_num);
+
+ return ERROR_IN_PAGE_ALLOC;
+ }
+
+ return 0;
+}
+
+uint32_t inline_cnstr_jobdesc_blob_dek(uint32_t *desc, uint8_t *plain_txt,
+ uint8_t *dek_blob, uint32_t in_sz)
+{
+ uint32_t ret = 0;
+ u32 aad_w1, aad_w2;
+ /* output blob will have 32 bytes key blob in beginning and
+ * 16 byte HMAC identifier at end of data blob */
+ uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
+ /* Setting HDR for blob */
+ uint8_t wrapped_key_hdr[8] = {HDR_TAG, 0x00, WRP_HDR_SIZE + out_sz,
+ HDR_PAR, HAB_MOD, HAB_ALG, in_sz, HAB_FLG};
+
+ /* initialize the blob array */
+ memset(dek_blob, 0, out_sz + 8);
+ /* Copy the header into the DEK blob buffer */
+ memcpy((uint32_t *)dek_blob, wrapped_key_hdr, sizeof(wrapped_key_hdr));
+
+ /* allocating secure memory */
+ ret = caam_page_alloc(PAGE_1, PARTITION_1);
+ if (ret)
+ return ret;
+
+ /* Write DEK to secure memory */
+ memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
+
+ unsigned long start = (unsigned long)SEC_MEM_PAGE1 &
+ ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start + 0x1000, ARCH_DMA_MINALIGN);
+ flush_dcache_range(start, end);
+
+ /* Now configure the access rights of the partition */
+ sec_out32(CAAM_SMAG1JR0(PARTITION_1), KS_G1); /* set group 1 */
+ sec_out32(CAAM_SMAG2JR0(PARTITION_1), 0); /* clear group 2 */
+ sec_out32(CAAM_SMAPJR0(PARTITION_1), PERM); /* set perm & locks */
+
+ /* construct aad for AES */
+ aad_w1 = (in_sz << OP_ALG_ALGSEL_SHIFT) | KEY_AES_SRC | LD_CCM_MODE;
+ aad_w2 = 0x0;
+
+ init_job_desc(desc, 0);
+
+ append_cmd(desc, CMD_LOAD | CLASS_2 | KEY_IMM | KEY_ENC |
+ (0x0c << LDST_OFFSET_SHIFT) | 0x08);
+
+ append_u32(desc, aad_w1);
+
+ append_u32(desc, aad_w2);
+
+ append_cmd_ptr(desc, (dma_addr_t)SEC_MEM_PAGE1, in_sz, CMD_SEQ_IN_PTR);
+
+ append_cmd_ptr(desc, (dma_addr_t)dek_blob + 8, out_sz, CMD_SEQ_OUT_PTR);
+
+ append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB |
+ OP_PCLID_SECMEM);
+
+ return ret;
+}
+#endif
void inline_cnstr_jobdesc_hash(uint32_t *desc,
const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h
index 84b3edd..d20c18c 100644
--- a/drivers/crypto/fsl/jobdesc.h
+++ b/drivers/crypto/fsl/jobdesc.h
@@ -14,6 +14,11 @@
#define KEY_IDNFR_SZ_BYTES 16
+#ifdef CONFIG_CMD_DEKBLOB
+uint32_t inline_cnstr_jobdesc_blob_dek(uint32_t *desc, uint8_t *plain_txt,
+ uint8_t *enc_blob, uint32_t in_sz);
+#endif
+
void inline_cnstr_jobdesc_hash(uint32_t *desc,
const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
u32 alg_type, uint32_t alg_size, int sg_tbl);
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index f9d4938..f99d594 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -90,11 +90,13 @@ static int jr_init(void)
jr.liodn = DEFAULT_JR_LIODN;
#endif
jr.size = JR_SIZE;
- jr.input_ring = (dma_addr_t *)malloc(JR_SIZE * sizeof(dma_addr_t));
+ jr.input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
+ JR_SIZE * sizeof(dma_addr_t));
if (!jr.input_ring)
return -1;
jr.output_ring =
- (struct op_ring *)malloc(JR_SIZE * sizeof(struct op_ring));
+ (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
+ JR_SIZE * sizeof(struct op_ring));
if (!jr.output_ring)
return -1;
@@ -163,13 +165,23 @@ static int jr_enqueue(uint32_t *desc_addr,
CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0)
return -1;
- jr.input_ring[head] = desc_phys_addr;
jr.info[head].desc_phys_addr = desc_phys_addr;
jr.info[head].desc_addr = (uint32_t)desc_addr;
jr.info[head].callback = (void *)callback;
jr.info[head].arg = arg;
jr.info[head].op_done = 0;
+ unsigned long start = (unsigned long)&jr.info[head] &
+ ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start + sizeof(struct jr_info),
+ ARCH_DMA_MINALIGN);
+ flush_dcache_range(start, end);
+
+ jr.input_ring[head] = desc_phys_addr;
+ start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
+ end = ALIGN(start + sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
+ flush_dcache_range(start, end);
+
jr.head = (head + 1) & (jr.size - 1);
sec_out32(®s->irja, 1);
@@ -187,6 +199,13 @@ static int jr_dequeue(void)
void *arg = NULL;
while (sec_in32(®s->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
+ unsigned long start = (unsigned long)jr.output_ring &
+ ~(ARCH_DMA_MINALIGN - 1);
+ unsigned long end = ALIGN(start +
+ sizeof(struct op_ring)*JR_SIZE,
+ ARCH_DMA_MINALIGN);
+ invalidate_dcache_range(start, end);
+
found = 0;
dma_addr_t op_desc = jr.output_ring[jr.tail].desc;
@@ -333,13 +352,17 @@ static int instantiate_rng(void)
memset(&op, 0, sizeof(struct result));
- desc = malloc(sizeof(int) * 6);
+ desc = memalign(ARCH_DMA_MINALIGN, sizeof(uint32_t) * 6);
if (!desc) {
printf("cannot allocate RNG init descriptor memory\n");
return -1;
}
inline_cnstr_jobdesc_rng_instantiation(desc);
+ int size = roundup(sizeof(uint32_t) * 6, ARCH_DMA_MINALIGN);
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + size);
+
ret = run_descriptor_jr(desc);
if (ret)
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index aa850a3..95fbb6b 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -11,6 +11,13 @@
#include <common.h>
#include <asm/io.h>
+#ifdef CONFIG_ARM
+#define sec_in32(a) __raw_readl(a)
+#define sec_out32(a, v) __raw_writel(v, a)
+#define sec_in16(a) __raw_readw(a)
+#define sec_clrbits32 clrbits_le32
+#define sec_setbits32 setbits_le32
+#elif CONFIG_PPC
#ifdef CONFIG_SYS_FSL_SEC_LE
#define sec_in32(a) in_le32(a)
#define sec_out32(a, v) out_le32(a, v)
@@ -26,6 +33,7 @@
#else
#error Neither CONFIG_SYS_FSL_SEC_LE nor CONFIG_SYS_FSL_SEC_BE is defined
#endif
+#endif /* ARCHITECURE */
/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
@@ -175,7 +183,59 @@ struct jr_regs {
u32 jrcr;
};
+#ifdef CONFIG_MX6
+
+#define SMCSJR_PO (3 << 6)
+#define SMCSJR_AERR (3 << 12)
+#define SMCSJR_CERR (3 << 14)
+#define CAAM_SMPO_0 CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
+#define CAAM_SMCJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
+#define CAAM_SMCSJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
+#define CAAM_SMAPJR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
+#define CAAM_SMAG2JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
+#define CAAM_SMAG1JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
+
+#define ERROR_IN_PAGE_ALLOC (1)
+#define CMD_PAGE_ALLOC 0x1
+#define CMD_PAGE_DEALLOC 0x2
+#define CMD_PART_DEALLOC 0x3
+#define CMD_INQUIRY 0x5
+#define CMD_COMPLETE (3 << 14)
+#define PAGE_AVAILABLE 0
+#define PAGE_OWNED (3 << 6)
+#define PAGE(x) (x << 16)
+#define PARTITION(x) (x << 8)
+#define PARTITION_OWNER(x) (0x3 << (x*2))
+
+/* 4kbyte pages */
+#define SEC_MEM_PAGE0 CAAM_ARB_BASE_ADDR
+#define SEC_MEM_PAGE1 (CAAM_ARB_BASE_ADDR + 0x1000)
+#define SEC_MEM_PAGE2 (CAAM_ARB_BASE_ADDR + 0x2000)
+#define SEC_MEM_PAGE3 (CAAM_ARB_BASE_ADDR + 0x3000)
+
+#define JR_MID 2 /* Matches ROM configuration */
+#define KS_G1 (1 << JR_MID) /* CAAM only */
+#define PERM 0x0000B008 /* Clear on release, lock SMAP
+ * lock SMAG group 1 Blob */
+
+/* HAB WRAPPED KEY header */
+#define WRP_HDR_SIZE 0x08
+#define HDR_TAG 0x81
+#define HDR_PAR 0x41
+/* HAB WRAPPED KEY Data */
+#define HAB_MOD 0x66
+#define HAB_ALG 0x55
+#define HAB_FLG 0x00
+
+#define PARTITION_1 1
+#define PAGE_1 1
+
+#endif
+
int sec_init(void);
+
+int blob_dek(u8 *src, u8 *dst, u8 len);
+
#endif
#endif /* __FSL_SEC_H */
--
1.7.9.5
