February 2015 - U-Boot

[U-Boot] [PATCH] configs: LS1012XA: Modify CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS for LS102XA
by Nikhil Badola 24 Feb '15

24 Feb '15

Change CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS value to 2 for LS102XAQDS and LS102XATWR. The XHCI controller has 2 ports; one for 2.0 and the other for 3.0 USB transactions Signed-off-by: Nikhil Badola <nikhil.badola(a)freescale.com> --- Depends on patch https://patchwork.ozlabs.org/patch/401448/ and https://patchwork.ozlabs.org/patch/401449/ include/configs/ls1021aqds.h | 2 +- include/configs/ls1021atwr.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 1389b00..3cd4a9f 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -298,7 +298,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 2b23cc9..4098214 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -46,7 +46,7 @@ #define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) -- 1.7.11.7

2 1

[U-Boot] [PATCH v2 0/16] ARM: UniPhier: bug fixes, refactorings and new features
by Masahiro Yamada 24 Feb '15

24 Feb '15

This series contains: - bug fixes and refactoring of SBC init code - add missing reset controls - support 1CS support card for all the SoCs - add xHCI driver Masahiro Yamada (16): ARM: UniPhier: fix comments in PH1-Pro4 SBC code ARM: UniPhier: fix SBC init code ARM: UniPhier: split clkrst_init() into two functions ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode ARM: UniPhier: enable STDMAC for EHCI ARM: UniPhier: remove EHCI platform devices ARM: UniPhier: move uniphier_ehci_reset() function ARM: UniPhier: replace "usb-ehci" with "generic-ehci" ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4 ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4 ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree usb: UniPhier: add UniPhier on-chip xHCI host driver support ARM: UniPhier: switch to xHCI for PH1-Pro4 ARM: UniPhier: support 1CS support card for all the UniPhier SoCs ARM: UniPhier: switch to 1CS support card ARM: UniPhier: consolidate MEMCONF setting code arch/arm/cpu/armv7/uniphier/Makefile | 1 + arch/arm/cpu/armv7/uniphier/board_early_init_f.c | 5 + arch/arm/cpu/armv7/uniphier/memconf.c | 104 ++++++++++++++++++ arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c | 25 +++-- .../cpu/armv7/uniphier/ph1-ld4/early_clkrst_init.c | 1 + arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 14 +-- arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 52 +-------- arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init_3cs.c | 50 +++++++++ arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 40 +++++-- .../armv7/uniphier/ph1-pro4/early_clkrst_init.c | 31 ++++++ arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 7 ++ arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 38 +------ .../arm/cpu/armv7/uniphier/ph1-pro4/sbc_init_3cs.c | 43 ++++++++ arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c | 30 +----- .../armv7/uniphier/ph1-sld8/early_clkrst_init.c | 1 + arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 14 +-- arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 59 +--------- .../arm/cpu/armv7/uniphier/ph1-sld8/sbc_init_3cs.c | 58 ++++++++++ arch/arm/cpu/armv7/uniphier/spl.c | 13 ++- arch/arm/dts/uniphier-ph1-ld4.dtsi | 8 +- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 4 - arch/arm/dts/uniphier-ph1-pro4.dtsi | 22 +++- arch/arm/dts/uniphier-ph1-sld3.dtsi | 10 +- arch/arm/dts/uniphier-ph1-sld8.dtsi | 8 +- arch/arm/include/asm/arch-uniphier/ehci-uniphier.h | 33 ------ arch/arm/include/asm/arch-uniphier/platdevice.h | 2 - arch/arm/include/asm/arch-uniphier/sc-regs.h | 13 ++- arch/arm/include/asm/arch-uniphier/sg-regs.h | 119 +-------------------- configs/ph1_ld4_defconfig | 2 +- configs/ph1_pro4_defconfig | 4 +- configs/ph1_sld8_defconfig | 2 +- doc/README.uniphier | 3 +- drivers/usb/host/Kconfig | 10 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-uniphier.c | 25 ++--- drivers/usb/host/xhci-uniphier.c | 90 ++++++++++++++++ include/configs/uniphier.h | 3 + 43 files changed, 551 insertions(+), 445 deletions(-) create mode 100644 arch/arm/cpu/armv7/uniphier/memconf.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init_3cs.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init_3cs.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init_3cs.c delete mode 100644 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h create mode 100644 drivers/usb/host/xhci-uniphier.c -- 1.9.1

2 18

[U-Boot] [PATCH v2] tegra20: tamonten: Fix the early gpio init
by Alban Bedel 24 Feb '15

24 Feb '15

As the GPIO driver isn't ready when gpio_early_init() is called the normal GPIO API can't be used. Fix this like on seaboard by using the lower level function tegra_spl_gpio_direction_output(). Signed-off-by: Alban Bedel <alban.bedel(a)avionic-design.de> --- v2: Updated the log message to better describe the problem --- board/avionic-design/common/tamonten.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index 9c86779..ea2425a 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -23,8 +23,10 @@ #ifdef CONFIG_BOARD_EARLY_INIT_F void gpio_early_init(void) { +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI4, NULL); - gpio_direction_output(GPIO_PI4, 1); +#endif + tegra_spl_gpio_direction_output(GPIO_PI4, 1); } #endif -- 2.3.0

3 2

[U-Boot] [PATCH v1] fastboot: add support for reboot-bootloader command
by Alexey Firago 24 Feb '15

24 Feb '15

The "fastboot reboot-bootloader" command is defined to re-enter into fastboot mode after rebooting into bootloader. This command is usually used after updating bootloader via fastboot. This commit implements only a generic side of the command - setting of the reset flag and then resetting. Setting of the reset flag is implemented using __weak fb_set_reboot_flag() function. The actual setting and checking of the reset flag should be implemented by a boot script and/or board/SoC specific code. Signed-off-by: Alexey Firago <alexey_firago(a)mentor.com> --- drivers/usb/gadget/f_fastboot.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 310175a..9d898cc 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -122,6 +122,7 @@ static struct usb_gadget_strings *fastboot_strings[] = { }; static void rx_handler_command(struct usb_ep *ep, struct usb_request *req); +static int strcmp_l1(const char *s1, const char *s2); static void fastboot_complete(struct usb_ep *ep, struct usb_request *req) { @@ -317,8 +318,20 @@ static void compl_do_reset(struct usb_ep *ep, struct usb_request *req) do_reset(NULL, 0, 0, NULL); } +int __weak fb_set_reboot_flag(void) +{ + return 0; +} + static void cb_reboot(struct usb_ep *ep, struct usb_request *req) { + char *cmd = req->buf; + if (!strcmp_l1("reboot-bootloader", cmd)) { + if (fb_set_reboot_flag()) { + fastboot_tx_write_str("FAILCannot set reboot flag"); + return; + } + } fastboot_func->in_req->complete = compl_do_reset; fastboot_tx_write_str("OKAY"); } -- 1.9.1

2 2

[U-Boot] [PATCHv1 00/22] Add SPL support for SoCFGPA
by dinguyen＠opensource.altera.com 24 Feb '15

24 Feb '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Hello, This patchset adds all the SPL code that is necessary to support the SoCFPGA platform. With this patch series, one should be able to configure the SDRAM controller and run u-boot. I have pushed a branch to git://git.rocketboards.org/u-boot-socfpga-next.git socfpga_for_next_spl_v1 for testing and reviewing. Thanks, Dinh Dinh Nguyen (22): arm: socfpga: spl: Add main sdram code arm: socfpga: enable saveenv to mmc partition arm: socfpga: Add sdram initialization code arm: socfpga: spl: Add SRAM section arm: socfpga: spl: put SPL in sram arm: socfpga: add functions to bring sdram, timer, and uart out of reset arm: socfpga: spl: enable sdram, timer and uart arm: socfpga: spl: Add call to timer_init arm: socfpga: spl: allow bootrom to enable IOs after warm reset arm: socfpga: spl: add sdram init and calibration arm: socfpga: spl: printout sdram size arm: socfpga: spl: Use common lowlevel_init arm: socfpga: spl: Add s_init arm: socfpga: spl: update lowlevel_init arm: socfpga: spl: add relocate_stack_to_sdram to lowlevel_init.S arm: socfpga: spl: add the stack in OCRAM arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.h arm: socfpga: add sdram stack to SPL arm: socfpga: spl: set SPL_MALLOC_SIZE arm: socfpga: spl: add a malloc section in sram arm: socfpga: spl: Add SDRAM check arm: socfpga: spl: update pll_config for dev kit arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/socfpga/Makefile | 4 +- arch/arm/cpu/armv7/socfpga/config.mk | 3 +- arch/arm/cpu/armv7/socfpga/lowlevel_init.S | 89 +- arch/arm/cpu/armv7/socfpga/reset_manager.c | 24 + arch/arm/cpu/armv7/socfpga/s_init.c | 49 + arch/arm/cpu/armv7/socfpga/sdram.c | 1311 ++++ arch/arm/cpu/armv7/socfpga/spl.c | 33 + arch/arm/cpu/armv7/socfpga/system_manager.c | 9 + arch/arm/cpu/armv7/socfpga/u-boot-spl.lds | 29 +- arch/arm/include/asm/arch-socfpga/reset_manager.h | 37 + arch/arm/include/asm/arch-socfpga/sdram.h | 434 ++ arch/arm/include/asm/arch-socfpga/system_manager.h | 20 +- board/altera/socfpga/Makefile | 1 + board/altera/socfpga/pll_config.h | 8 +- board/altera/socfpga/sdram/Makefile | 12 + board/altera/socfpga/sdram/sdram_config.h | 100 + board/altera/socfpga/sdram/sdram_io.h | 44 + board/altera/socfpga/sdram/sequencer.c | 7993 ++++++++++++++++++++ board/altera/socfpga/sdram/sequencer.h | 504 ++ board/altera/socfpga/sdram/sequencer_auto.h | 216 + .../altera/socfpga/sdram/sequencer_auto_ac_init.c | 88 + .../socfpga/sdram/sequencer_auto_inst_init.c | 273 + board/altera/socfpga/sdram/sequencer_defines.h | 154 + board/altera/socfpga/sdram/system.h | 15 + include/configs/socfpga_common.h | 16 +- include/configs/socfpga_cyclone5.h | 1 + 27 files changed, 11422 insertions(+), 47 deletions(-) create mode 100644 arch/arm/cpu/armv7/socfpga/s_init.c create mode 100644 arch/arm/cpu/armv7/socfpga/sdram.c create mode 100644 arch/arm/include/asm/arch-socfpga/sdram.h create mode 100644 board/altera/socfpga/sdram/Makefile create mode 100644 board/altera/socfpga/sdram/sdram_config.h create mode 100644 board/altera/socfpga/sdram/sdram_io.h create mode 100644 board/altera/socfpga/sdram/sequencer.c create mode 100644 board/altera/socfpga/sdram/sequencer.h create mode 100644 board/altera/socfpga/sdram/sequencer_auto.h create mode 100644 board/altera/socfpga/sdram/sequencer_auto_ac_init.c create mode 100644 board/altera/socfpga/sdram/sequencer_auto_inst_init.c create mode 100644 board/altera/socfpga/sdram/sequencer_defines.h create mode 100644 board/altera/socfpga/sdram/system.h -- 2.2.1

7 82

[U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init
by Alban Bedel 24 Feb '15

24 Feb '15

To set gpio during the early init we now need to use tegra_spl_gpio_direction_output(), copied from seaboard. Signed-off-by: Alban Bedel <alban.bedel(a)avionic-design.de> --- board/avionic-design/common/tamonten.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index 9c86779..ea2425a 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -23,8 +23,10 @@ #ifdef CONFIG_BOARD_EARLY_INIT_F void gpio_early_init(void) { +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI4, NULL); - gpio_direction_output(GPIO_PI4, 1); +#endif + tegra_spl_gpio_direction_output(GPIO_PI4, 1); } #endif -- 2.3.0

2 4

[U-Boot] [PATCH 0/4] arm: rmobile: silk: minor fixes and SDHI support
by Vladimir Barinov 24 Feb '15

24 Feb '15

This patch series adds minor Silk board fixes and SDHI support To apply this commit, the following must be applied in advance: https://patchwork.ozlabs.org/patch/439059/ - dm: sh: serial: Add support driver model https://patchwork.ozlabs.org/patch/438202/ - arm: rmobile: silk: Migrate serial driver to drivers model https://patchwork.ozlabs.org/patch/439093/ - arm: rmobile: alt: Add support SDHI Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas(a)cogentembedded.com> Signed-off-by: Valentine Barshak <valentine.barshak+renesas(a)cogentembedded.com> --- board/renesas/silk/silk.c | 47 ++++++++++++++++++++++++++++++++++++++++++++--- configs/silk_defconfig | 1 + include/configs/silk.h | 3 +++ 3 files changed, 48 insertions(+), 3 deletions(-) -- 1.9.1

1 4

[U-Boot] [PATCH 0/14] ARM: UniPhier: bug fixes, refactorings and new features
by Masahiro Yamada 24 Feb '15

24 Feb '15

This series contains: - bug fixes and refactoring of SBC init code - add missing reset controls - support 1CS support card for all the SoCs - add xHCI driver Masahiro Yamada (14): ARM: UniPhier: fix comments in PH1-Pro4 SBC code ARM: UniPhier: fix SBC init code ARM: UniPhier: split clkrst_init() into two functions ARM: UniPhier: enable STDMAC for EHCI ARM: UniPhier: remove EHCI platform devices ARM: UniPhier: move uniphier_ehci_reset() function ARM: UniPhier: replace "usb-ehci" with "generic-ehci" ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4 ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4 ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree usb: UniPhier: add UniPhier on-chip xHCI host driver support ARM: UniPhier: switch to xHCI for PH1-Pro4 ARM: UniPhier: support 1CS support card for all the UniPhier SoCs ARM: UniPhier: consolidate MEMCONF setting code arch/arm/cpu/armv7/uniphier/Makefile | 1 + arch/arm/cpu/armv7/uniphier/board_early_init_f.c | 5 + arch/arm/cpu/armv7/uniphier/memconf.c | 104 ++++++++++++++++++ arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-ld4/clkrst_init.c | 25 +++-- .../cpu/armv7/uniphier/ph1-ld4/early_clkrst_init.c | 1 + arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 14 +-- arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init.c | 52 +-------- arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init_3cs.c | 50 +++++++++ arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/clkrst_init.c | 40 +++++-- .../armv7/uniphier/ph1-pro4/early_clkrst_init.c | 26 +++++ arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c | 7 ++ arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 38 +------ .../arm/cpu/armv7/uniphier/ph1-pro4/sbc_init_3cs.c | 43 ++++++++ arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c | 11 +- arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 6 +- arch/arm/cpu/armv7/uniphier/ph1-sld8/clkrst_init.c | 30 +----- .../armv7/uniphier/ph1-sld8/early_clkrst_init.c | 1 + arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 14 +-- arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init.c | 59 +--------- .../arm/cpu/armv7/uniphier/ph1-sld8/sbc_init_3cs.c | 58 ++++++++++ arch/arm/cpu/armv7/uniphier/spl.c | 13 ++- arch/arm/dts/uniphier-ph1-ld4.dtsi | 8 +- arch/arm/dts/uniphier-ph1-pro4-ref.dts | 4 - arch/arm/dts/uniphier-ph1-pro4.dtsi | 22 +++- arch/arm/dts/uniphier-ph1-sld3.dtsi | 10 +- arch/arm/dts/uniphier-ph1-sld8.dtsi | 8 +- arch/arm/include/asm/arch-uniphier/ehci-uniphier.h | 33 ------ arch/arm/include/asm/arch-uniphier/platdevice.h | 2 - arch/arm/include/asm/arch-uniphier/sc-regs.h | 13 ++- arch/arm/include/asm/arch-uniphier/sg-regs.h | 119 +-------------------- configs/ph1_pro4_defconfig | 2 +- doc/README.uniphier | 3 +- drivers/usb/host/Kconfig | 10 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-uniphier.c | 25 ++--- drivers/usb/host/xhci-uniphier.c | 85 +++++++++++++++ include/configs/uniphier.h | 3 + 41 files changed, 538 insertions(+), 442 deletions(-) create mode 100644 arch/arm/cpu/armv7/uniphier/memconf.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/sbc_init_3cs.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init_3cs.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/early_clkrst_init.c create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/sbc_init_3cs.c delete mode 100644 arch/arm/include/asm/arch-uniphier/ehci-uniphier.h create mode 100644 drivers/usb/host/xhci-uniphier.c -- 1.9.1

3 22

[U-Boot] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i
by Adam Sampson 24 Feb '15

24 Feb '15

The tpr3 (timing skew) parameter is used in all supported versions of the sunxi DRAM controller, but it was only enabled for sun4i in 47e3501a76894f4ba08bc61f33774bd5d39ff464. Signed-off-by: Adam Sampson <ats(a)offog.org> --- board/sunxi/dram_sun5i_auto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c index e52d54c..660b18e 100644 --- a/board/sunxi/dram_sun5i_auto.c +++ b/board/sunxi/dram_sun5i_auto.c @@ -24,7 +24,7 @@ static struct dram_para dram_para = { # include "dram_timings_sun4i.h" .active_windowing = 1, #endif - .tpr3 = 0, + .tpr3 = CONFIG_DRAM_TPR3, .tpr4 = 0, .tpr5 = 0, .emr1 = CONFIG_DRAM_EMR1, -- 1.7.10.4

3 2

[U-Boot] [PATCH 1/2] dreamplug: switch to GENERIC_BOARD
by Ian Campbell 24 Feb '15

24 Feb '15

From: Ian Campbell <ijc(a)hellion.org.uk> Built and booted to a Linux prompt with no issues discovered. network and usb access to the external mmc are ok. (my internal mmc is knackered at the h/w level). Signed-off-by: Ian Campbell <ijc(a)hellion.org.uk> Cc: Jason Cooper <u-boot(a)lakedaemon.net> Cc: Masahiro Yamada <yamada.m(a)jp.panasonic.com> --- I wouldn't be terribly surprised if this could be done in mv-common.h but I only have a dreamplug to test with. --- include/configs/dreamplug.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 981233a..37ae686 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -37,6 +37,7 @@ #define CONFIG_KW88F6281 1 /* SOC Name */ #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_SYS_GENERIC_BOARD /* * Commands configuration -- 2.1.4

3 2