February 2015 - U-Boot

[U-Boot] [PATCH v2 0/8] arm: a few steps to reduce the boot time
by Przemyslaw Marczak 09 Mar '15

09 Mar '15

This patchset reduces the boot time for ARM architecture, Exynos boards, and boards with DFU enabled. For tested Trats2 and Odroid X2 devices, this was done in four steps. 1. Enable the arch memcpy and memset 2. Enable arch memset for .bss clear 3. Reduce the .bss section small as possible by removing the static dfu buffer (32MiB in .bss - Trats2), and use the malloc. 4. Skip zeroing the memory reserved for malloc at malloc init. For Trats2 it was 80MiB of memory. The .bss section will grow if we have a lot of static variables. This section is cleared before jump to the relocated U-Boot, and it was done word by word. To reduce the time for this step, we can enable arch memset, which uses multiple ARM registers. For configs with DFU enabled, we can find the dfu buffer in this section, which has at least 8MB (32MB for Trats2). This is a lot of useless data, which is not required for standard boot. So this buffer should be dynamic allocated. The next issue was about the malloc reserved memory, which was zeroed at malloc init in one of early init call. Some boards has more than one MiB of reserved malloc memory. Zeroing this, adds another boot delay. Now the memory is zeroed only on calloc call. So, actually the all was about unnecessary operations on 'big' data. Przemyslaw Marczak (8): exynos: config: enable arch memcpy and arch memset arm: relocation: clear .bss section with arch memset if defined dfu: mmc: file buffer: remove static allocation dlmalloc: add option for skip memset in malloc init README: add info about skip memset at malloc init kconfig: malloc: add option for skip memset at malloc init trats2: defconfig: enable expert and skip memset at malloc init odroid: defconfig: enable expert and skip malloc memset Kconfig | 26 +++++++++++++++++++------- README | 7 +++++++ arch/arm/lib/crt0.S | 10 +++++++++- common/dlmalloc.c | 10 +++++++--- configs/odroid_defconfig | 2 ++ configs/trats2_defconfig | 2 ++ drivers/dfu/dfu_mmc.c | 25 ++++++++++++++++++++++--- include/configs/exynos-common.h | 3 +++ 8 files changed, 71 insertions(+), 14 deletions(-) -- 1.9.1

7 84

[U-Boot] [PATCH v4 00/14] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix
by Jan Kiszka 09 Mar '15

09 Mar '15

Changes in v4: - rebased over master - fixed a nasty bug in CTNFRQ setting that broke unrelated code - fixed a bug in Tegra's psci_cpu_off that prevented powergating - factored out armv7_get_cpu_id macro - removed duplicate call to psci_arch_init - addressed review comments regarding comments - wait on initial CPU power-down using Flow Controller instead of PMC Jan CC: Ian Campbell <ijc(a)hellion.org.uk> CC: Marc Zyngier <marc.zyngier(a)arm.com> Ian Campbell (3): tegra124: Add more registers to struct mc_ctlr jetson-tk1: Add PSCI configuration options and reserve secure code tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 Jan Kiszka (11): sun7i: Remove duplicate call to psci_arch_init ARM: Factor out armv7_get_cpu_id macro ARM: Factor out reusable psci_cpu_off_common ARM: Factor out reusable psci_cpu_entry ARM: Factor out reusable psci_get_cpu_stack_top ARM: Put target PC for PSCI CPU_ON on per-CPU stack virt-dt: Allow reservation of secure region when in a RAM carveout tegra: Make tegra_powergate_power_on public tegra: Add ap_pm_init hook tegra124: Add PSCI support for Tegra124 tegra: Set CNTFRQ for secondary CPUs arch/arm/cpu/armv7/psci.S | 102 +++++++++++++++++++++++++ arch/arm/cpu/armv7/sunxi/psci.S | 112 +++++---------------------- arch/arm/cpu/armv7/virt-dt.c | 29 +++++++ arch/arm/cpu/armv7/virt-v7.c | 5 ++ arch/arm/include/asm/arch-tegra/ap.h | 5 ++ arch/arm/include/asm/arch-tegra/powergate.h | 1 + arch/arm/include/asm/arch-tegra124/flow.h | 6 ++ arch/arm/include/asm/arch-tegra124/mc.h | 35 ++++++++- arch/arm/include/asm/armv7.h | 1 + arch/arm/include/asm/macro.h | 7 ++ arch/arm/include/asm/system.h | 1 + arch/arm/lib/bootm-fdt.c | 5 ++ arch/arm/mach-tegra/Makefile | 4 + arch/arm/mach-tegra/ap.c | 15 ++++ arch/arm/mach-tegra/powergate.c | 2 +- arch/arm/mach-tegra/psci.S | 114 ++++++++++++++++++++++++++++ arch/arm/mach-tegra/tegra124/Kconfig | 2 + arch/arm/mach-tegra/tegra124/Makefile | 4 + arch/arm/mach-tegra/tegra124/ap.c | 55 ++++++++++++++ board/nvidia/common/board.c | 4 + include/configs/jetson-tk1.h | 5 ++ 21 files changed, 416 insertions(+), 98 deletions(-) create mode 100644 arch/arm/mach-tegra/psci.S create mode 100644 arch/arm/mach-tegra/tegra124/ap.c -- 2.1.4

3 23

[U-Boot] [RFC PATCH 0/7] RFC: dm: Add USB support
by Simon Glass 09 Mar '15

09 Mar '15

This series adds basic driver model support to USB. The intent is to permit the various subsystems (OHCI, EHCI, XHCI) to co-exist and allow any number of USB ports of different types. So far the absolute limit on the number of USB devices is only slightly relaxed. Only USB controllers have a real driver model device. USB devices (including the hub in the controller) are not modelled as driver model devices. This is for two reasons: - it is easier since we don't need to bind a whole lot of devices when scanning - the two main USB devices (block devices and Ethernet) don't have driver mode support yet anyway, so it would be pointless. However the recent network RFC has encouraged me to send this. The basic approach is to set up the driver model structures in parallel to what already exists rather than to replace them. This allows both driver model and legacy to be used for USB, although not with the same board. So far only XHCI is supported. As an example the Exynos XHCI driver is converted to driver model. I would appreciate comments before going further. Caveats: - sandbox code is incomplete and there are no tests - 'usb stop' does not remove existing devices (I have not yet settled on the best approach) - the usb.h changes need to be split correctly into the patches once they are final This series is available at u-boot-dm/usb-working. Simon Glass (7): dm: usb: Add a uclass for USB controllers dm: usb: Support driver model in exynos XHCI dm: usb: Adjust users of the USB stack to work with driver model dm: usb: WIP sandbox USB implementation dm: core: Add a function to get the uclass data for a device arm: Show relocated PC/LR in the register dump dm: exynos: Enable driver model for snow XHCI Makefile | 1 + arch/arm/lib/interrupts.c | 13 +- arch/sandbox/dts/sandbox.dts | 20 +++ arch/sandbox/include/asm/processor.h | 0 common/cmd_usb.c | 74 ++++++++--- common/usb.c | 28 +++-- common/usb_hub.c | 13 +- common/usb_storage.c | 148 +++++++++++++--------- drivers/core/device.c | 10 ++ drivers/usb/dev/Makefile | 10 ++ drivers/usb/dev/sandbox-flash.c | 95 +++++++++++++++ drivers/usb/dev/sandbox-hub.c | 116 ++++++++++++++++++ drivers/usb/dev/usb-emul-uclass.c | 16 +++ drivers/usb/eth/usb_ether.c | 46 +++++-- drivers/usb/host/Makefile | 5 + drivers/usb/host/usb-sandbox.c | 151 +++++++++++++++++++++++ drivers/usb/host/usb-uclass.c | 227 ++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci-exynos5.c | 115 +++++++++++++++++- drivers/usb/host/xhci.c | 229 ++++++++++++++++++++++++++++------- drivers/usb/host/xhci.h | 24 ++++ include/configs/sandbox.h | 3 + include/configs/snow.h | 1 + include/dm/device.h | 10 ++ include/dm/uclass-id.h | 2 + include/usb.h | 76 +++++++++++- include/usb_defs.h | 14 ++- 26 files changed, 1294 insertions(+), 153 deletions(-) create mode 100644 arch/sandbox/include/asm/processor.h create mode 100644 drivers/usb/dev/Makefile create mode 100644 drivers/usb/dev/sandbox-flash.c create mode 100644 drivers/usb/dev/sandbox-hub.c create mode 100644 drivers/usb/dev/usb-emul-uclass.c create mode 100644 drivers/usb/host/usb-sandbox.c create mode 100644 drivers/usb/host/usb-uclass.c -- 2.2.0.rc0.207.ga3a616c

4 20

[U-Boot] [PATCH] sun6i: Add support for the Mele I7 board
by codekipper＠gmail.com 08 Mar '15

08 Mar '15

From: Marcus Cooper <codekipper(a)gmail.com> The Mele I7 is a Allwinner based Android TV box. It features a A31 SOC, 1G RAM, 8GB NAND, HDMI out, A/V out, SPDIF, IrDA, 3 USB A, 1 USB micro OTG and Wireless LAN. Signed-off-by: Marcus Cooper <codekipper(a)gmail.com> --- board/sunxi/MAINTAINERS | 5 +++++ configs/Mele_I7_defconfig | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+) create mode 100644 configs/Mele_I7_defconfig diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ead09c9..4c167f7 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -100,6 +100,11 @@ M: Aleksei Mamlin <mamlinav(a)gmail.com> S: Maintained F: configs/Marsboard_A10_defconfig +MELE I7 BOARD +M: Marcus Cooper <codekipper(a)gmail.com> +S: Maintained +F: configs/Mele_I7_defconfig + MELE M5 BOARD M: Ian Campbell <ijc(a)hellion.org.uk> S: Maintained diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig new file mode 100644 index 0000000..1046694 --- /dev/null +++ b/configs/Mele_I7_defconfig @@ -0,0 +1,20 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_FDTFILE="sun6i-a31-i7.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=120 +# The Mele I7 uses 3.3V for general IO ++S:CONFIG_AXP221_DCDC1_VOLT=3300 +# Ethernet phy power ++S:CONFIG_AXP221_DLDO1_VOLT=3300 +# USB hub power ++S:CONFIG_AXP221_DLDO4_VOLT=3300 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PC27" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN="" -- 2.3.1

3 2

[U-Boot] [PATCH 3/3] m68k: add generic-board support
by Angelo Dureghello 07 Mar '15

07 Mar '15

Add generic-board support for the m68k architecture. Signed-off-by: Angelo Dureghello <angelo(a)sysam.it> --- arch/m68k/config.mk | 3 +++ arch/m68k/include/asm/config.h | 3 +++ arch/m68k/include/asm/u-boot.h | 8 ++++++++ arch/m68k/lib/Makefile | 4 +++- common/board_f.c | 22 ++++++++++++++++------ common/board_r.c | 22 +++++++--------------- include/asm-generic/u-boot.h | 2 +- 7 files changed, 41 insertions(+), 23 deletions(-) diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index 3b3a7e8..a629b68 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -11,6 +11,9 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 +# Support generic board on m68k +__HAVE_ARCH_GENERIC_BOARD := y + PLATFORM_CPPFLAGS += -D__M68K__ PLATFORM_LDFLAGS += -n PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index 9c4d3fb..7590842 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -7,6 +7,9 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_GENERIC_GLOBAL_DATA + #define CONFIG_NEEDS_MANUAL_RELOC #define CONFIG_LMB diff --git a/arch/m68k/include/asm/u-boot.h b/arch/m68k/include/asm/u-boot.h index 983cb2d..911c0d3 100644 --- a/arch/m68k/include/asm/u-boot.h +++ b/arch/m68k/include/asm/u-boot.h @@ -20,6 +20,11 @@ * include/asm-ppc/u-boot.h */ +#ifdef CONFIG_SYS_GENERIC_BOARD +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> +#else + #ifndef __ASSEMBLY__ typedef struct bd_info { @@ -48,6 +53,9 @@ typedef struct bd_info { #endif /* __ASSEMBLY__ */ +#endif /* !CONFIG_SYS_GENERIC_BOARD */ + + /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_M68K diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index 65867d6..d0e1a84 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -5,7 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += board.o +ifndef CONFIG_SYS_GENERIC_BOARD +obj-y += board.o +endif obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += interrupts.o diff --git a/common/board_f.c b/common/board_f.c index bdad36b..0de3919 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -174,7 +174,7 @@ static int announce_dram_init(void) return 0; } -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) static int init_func_ram(void) { #ifdef CONFIG_BOARD_TYPES @@ -624,7 +624,7 @@ static int display_new_sp(void) return 0; } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static int setup_board_part1(void) { bd_t *bd = gd->bd; @@ -645,7 +645,7 @@ static int setup_board_part1(void) defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) @@ -735,6 +735,13 @@ static int setup_reloc(void) { #ifdef CONFIG_SYS_TEXT_BASE gd->reloc_off = gd->relocaddr - CONFIG_SYS_TEXT_BASE; +#ifdef CONFIG_M68K + /* + * On all ColdFire arch cpu, monitor code starts always + * just after the default vector table location, so at 0x400 + */ + gd->reloc_off = gd->relocaddr - (CONFIG_SYS_TEXT_BASE + 0x400); +#endif #endif memcpy(gd->new_gd, (char *)gd, sizeof(gd_t)); @@ -860,6 +867,9 @@ static init_fnc_t init_sequence_f[] = { #ifdef CONFIG_FSL_ESDHC get_clocks, #endif +#ifdef CONFIG_M68K + get_clocks, +#endif env_init, /* initialize environment */ #if defined(CONFIG_8xx_CPUCLK_DEFAULT) /* get CPU and bus clocks according to the environment variable */ @@ -886,7 +896,7 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) checkcpu, #endif print_cpuinfo, /* display cpu info (and speed) */ @@ -912,7 +922,7 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) dram_init, /* configure available RAM banks */ #endif -#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_M68K) init_func_ram, #endif #ifdef CONFIG_POST @@ -980,7 +990,7 @@ static init_fnc_t init_sequence_f[] = { reserve_stacks, setup_dram_config, show_dram_config, -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) setup_board_part1, INIT_FUNC_WATCHDOG_RESET setup_board_part2, diff --git a/common/board_r.c b/common/board_r.c index 907b33c..b2488c0 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -164,14 +164,17 @@ static int initr_serial(void) return 0; } -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) static int initr_trap(void) { /* * Setup trap handlers */ +#if defined(CONFIG_PPC) trap_init(gd->relocaddr); - +#else + trap_init(CONFIG_SYS_SDRAM_BASE); +#endif return 0; } #endif @@ -265,14 +268,6 @@ static int initr_malloc(void) return 0; } -#ifdef CONFIG_SYS_NONCACHED_MEMORY -static int initr_noncached(void) -{ - noncached_init(); - return 0; -} -#endif - #ifdef CONFIG_DM static int initr_dm(void) { @@ -688,9 +683,6 @@ init_fnc_t init_sequence_r[] = { #endif initr_barrier, initr_malloc, -#ifdef CONFIG_SYS_NONCACHED_MEMORY - initr_noncached, -#endif bootstage_relocate, #ifdef CONFIG_DM initr_dm, @@ -714,7 +706,7 @@ init_fnc_t init_sequence_r[] = { #ifdef CONFIG_NEEDS_MANUAL_RELOC initr_manual_reloc_cmdtable, #endif -#ifdef CONFIG_PPC +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) initr_trap, #endif #ifdef CONFIG_ADDR_MAP @@ -813,7 +805,7 @@ init_fnc_t init_sequence_r[] = { #if defined(CONFIG_ARM) initr_enable_interrupts, #endif -#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) +#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE) || defined(CONFIG_M68K) timer_init, /* initialize timer */ #endif #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index aef39d7..e00db7d 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -41,7 +41,7 @@ typedef struct bd_info { || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) unsigned long bi_mbar_base; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) -- 2.1.4

3 2

[U-Boot] [PATCH] m68k: Add generic board support for MCF547X/8X and MCF5445X
by Alison Wang 06 Mar '15

06 Mar '15

This patch adds generic board support for MCF547X/8X and MCF5445X. It is based on the patch about common generic board support for M68K architecture sent by Angelo. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- common/board_f.c | 8 ++++++++ common/board_r.c | 2 +- include/asm-generic/u-boot.h | 7 ++++++- include/configs/M54451EVB.h | 2 ++ include/configs/M54455EVB.h | 2 ++ include/configs/M5475EVB.h | 4 +++- include/configs/M5485EVB.h | 4 +++- 7 files changed, 25 insertions(+), 4 deletions(-) diff --git a/common/board_f.c b/common/board_f.c index 0de3919..21ea677 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -674,6 +674,14 @@ static int setup_board_part2(void) bd->bi_ipbfreq = gd->arch.ipb_clk; bd->bi_pcifreq = gd->pci_clk; #endif /* CONFIG_MPC5xxx */ +#if defined(CONFIG_M68K) && defined(CONFIG_PCI) + bd->bi_pcifreq = gd->pci_clk; +#endif +#if defined(CONFIG_EXTRA_CLOCK) + bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ +#endif return 0; } diff --git a/common/board_r.c b/common/board_r.c index b2488c0..05870ef 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -744,7 +744,7 @@ init_fnc_t init_sequence_r[] = { initr_flash, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_PPC) +#if defined(CONFIG_PPC) || defined(CONFIG_M68K) /* initialize higher level parts of CPU like time base and timers */ cpu_init_r, #endif diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index e00db7d..5bc13cb 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -62,10 +62,15 @@ typedef struct bd_info { #if defined(CONFIG_MPC512X) unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */ #endif /* CONFIG_MPC512X */ -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif +#if defined(CONFIG_EXTRA_CLOCK) + unsigned long bi_inpfreq; /* input Freq in MHz */ + unsigned long bi_vcofreq; /* vco Freq in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ +#endif #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 0f4b726..734a77f 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -22,6 +22,8 @@ #define CONFIG_M54451 /* define processor type */ #define CONFIG_M54451EVB /* M54451EVB board */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7a55d3c..2faf581 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -22,6 +22,8 @@ #define CONFIG_M54455 /* define processor type */ #define CONFIG_M54455EVB /* M54455EVB board */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index e88a6bd..2f4549f 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -22,11 +22,13 @@ #define CONFIG_M547x /* define processor type */ #define CONFIG_M5475 /* define processor type */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_HW_WATCHDOG +#undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index e412806..9aa02f7 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -22,11 +22,13 @@ #define CONFIG_M548x /* define processor type */ #define CONFIG_M5485 /* define processor type */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_HW_WATCHDOG +#undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -- 2.1.0.27.g96db324

3 2

[U-Boot] [PATCH] README: remove description about driver model configuration options
by Masahiro Yamada 06 Mar '15

06 Mar '15

All the DM-related configuration options are described in Kconfig helps. They should not be duplicated in README. Signed-off-by: Masahiro Yamada <yamada.m(a)jp.panasonic.com> --- README | 113 ----------------------------------------------------------------- 1 file changed, 113 deletions(-) diff --git a/README b/README index ba57dc5..ea4d79c 100644 --- a/README +++ b/README @@ -621,119 +621,6 @@ The following options need to be configured: exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! -- Driver Model - Driver model is a new framework for devices in U-Boot - introduced in early 2014. U-Boot is being progressively - moved over to this. It offers a consistent device structure, - supports grouping devices into classes and has built-in - handling of platform data and device tree. - - To enable transition to driver model in a relatively - painful fashion, each subsystem can be independently - switched between the legacy/ad-hoc approach and the new - driver model using the options below. Also, many uclass - interfaces include compatibility features which may be - removed once the conversion of that subsystem is complete. - As a result, the API provided by the subsystem may in fact - not change with driver model. - - See doc/driver-model/README.txt for more information. - - CONFIG_DM - - Enable driver model. This brings in the core support, - including scanning of platform data on start-up. If - CONFIG_OF_CONTROL is enabled, the device tree will be - scanned also when available. - - CONFIG_CMD_DM - - Enable driver model test commands. These allow you to print - out the driver model tree and the uclasses. - - CONFIG_DM_DEMO - - Enable some demo devices and the 'demo' command. These are - really only useful for playing around while trying to - understand driver model in sandbox. - - CONFIG_SPL_DM - - Enable driver model in SPL. You will need to provide a - suitable malloc() implementation. If you are not using the - full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, - consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you - must provide CONFIG_SYS_MALLOC_F_LEN to set the size. - In most cases driver model will only allocate a few uclasses - and devices in SPL, so 1KB should be enable. See - CONFIG_SYS_MALLOC_F_LEN for more details on how to enable - it. - - CONFIG_DM_SERIAL - - Enable driver model for serial. This replaces - drivers/serial/serial.c with the serial uclass, which - implements serial_putc() etc. The uclass interface is - defined in include/serial.h. - - CONFIG_DM_GPIO - - Enable driver model for GPIO access. The standard GPIO - interface (gpio_get_value(), etc.) is then implemented by - the GPIO uclass. Drivers provide methods to query the - particular GPIOs that they provide. The uclass interface - is defined in include/asm-generic/gpio.h. - - CONFIG_DM_SPI - - Enable driver model for SPI. The SPI slave interface - (spi_setup_slave(), spi_xfer(), etc.) is then implemented by - the SPI uclass. Drivers provide methods to access the SPI - buses that they control. The uclass interface is defined in - include/spi.h. The existing spi_slave structure is attached - as 'parent data' to every slave on each bus. Slaves - typically use driver-private data instead of extending the - spi_slave structure. - - CONFIG_DM_SPI_FLASH - - Enable driver model for SPI flash. This SPI flash interface - (spi_flash_probe(), spi_flash_write(), etc.) is then - implemented by the SPI flash uclass. There is one standard - SPI flash driver which knows how to probe most chips - supported by U-Boot. The uclass interface is defined in - include/spi_flash.h, but is currently fully compatible - with the old interface to avoid confusion and duplication - during the transition parent. SPI and SPI flash must be - enabled together (it is not possible to use driver model - for one and not the other). - - CONFIG_DM_CROS_EC - - Enable driver model for the Chrome OS EC interface. This - allows the cros_ec SPI driver to operate with CONFIG_DM_SPI - but otherwise makes few changes. Since cros_ec also supports - I2C and LPC (which don't support driver model yet), a full - conversion is not yet possible. - - - ** Code size options: The following options are enabled by - default except in SPL. Enable them explicitly to get these - features in SPL. - - CONFIG_DM_WARN - - Enable the dm_warn() function. This can use up quite a bit - of space for its strings. - - CONFIG_DM_STDIO - - Enable registering a serial device with the stdio library. - - CONFIG_DM_DEVICE_REMOVE - - Enable removing of devices. - - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ -- 1.9.1

2 2

[U-Boot] [PATCH] lib: div64: syncronize to current kernel version
by Nishanth Menon 06 Mar '15

06 Mar '15

Synchronize with the implementation from v3.18 tag. This allows us to use a standardized 64 bit ops on architectures that do not natively support 64 bit (example: 32bit ARM) Signed-off-by: Nishanth Menon <nm(a)ti.com> --- include/linux/math64.h | 81 ++++++++++++++++++++++++++++++ lib/div64.c | 132 +++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 209 insertions(+), 4 deletions(-) diff --git a/include/linux/math64.h b/include/linux/math64.h index 6d760d7..a10ccbb 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -2,9 +2,13 @@ #define _LINUX_MATH64_H #include <linux/types.h> +#include <div64.h> #if BITS_PER_LONG == 64 +#define div64_long(x, y) div64_s64((x), (y)) +#define div64_ul(x, y) div64_u64((x), (y)) + /** * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder * @@ -27,6 +31,15 @@ static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) } /** + * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder + */ +static inline u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** * div64_u64 - unsigned 64bit divide with 64bit divisor */ static inline u64 div64_u64(u64 dividend, u64 divisor) @@ -34,8 +47,19 @@ static inline u64 div64_u64(u64 dividend, u64 divisor) return dividend / divisor; } +/** + * div64_s64 - signed 64bit divide with 64bit divisor + */ +static inline s64 div64_s64(s64 dividend, s64 divisor) +{ + return dividend / divisor; +} + #elif BITS_PER_LONG == 32 +#define div64_long(x, y) div_s64((x), (y)) +#define div64_ul(x, y) div_u64((x), (y)) + #ifndef div_u64_rem static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) { @@ -48,10 +72,18 @@ static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder); #endif +#ifndef div64_u64_rem +extern u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder); +#endif + #ifndef div64_u64 extern u64 div64_u64(u64 dividend, u64 divisor); #endif +#ifndef div64_s64 +extern s64 div64_s64(s64 dividend, s64 divisor); +#endif + #endif /* BITS_PER_LONG */ /** @@ -82,4 +114,53 @@ static inline s64 div_s64(s64 dividend, s32 divisor) u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); +static __always_inline u32 +__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} + +#if defined(CONFIG_ARCH_SUPPORTS_INT128) && defined(__SIZEOF_INT128__) + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + return (u64)(((unsigned __int128)a * mul) >> shift); +} +#endif /* mul_u64_u32_shr */ + +#else + +#ifndef mul_u64_u32_shr +static inline u64 mul_u64_u32_shr(u64 a, u32 mul, unsigned int shift) +{ + u32 ah, al; + u64 ret; + + al = a; + ah = a >> 32; + + ret = ((u64)al * mul) >> shift; + if (ah) + ret += ((u64)ah * mul) << (32 - shift); + + return ret; +} +#endif /* mul_u64_u32_shr */ + +#endif + #endif /* _LINUX_MATH64_H */ diff --git a/lib/div64.c b/lib/div64.c index 795ef0e..9b53faf 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -9,17 +9,21 @@ * Generic C version of 64bit/32bit division and modulo, with * 64bit result and 32bit remainder. * - * The fast case for (n>>32 == 0) is handled inline by do_div(). + * The fast case for (n>>32 == 0) is handled inline by do_div(). * * Code generated for this function might be very inefficient * for some CPUs. __div64_32() can be overridden by linking arch-specific - * assembly versions such as arch/powerpc/lib/div64.S and arch/sh/lib/div64.S. + * assembly versions such as arch/ppc/lib/div64.S and arch/sh/lib/div64.S. */ +#include <common.h> #include <div64.h> -#include <linux/types.h> +#include <linux/math64.h> -uint32_t __div64_32(uint64_t *n, uint32_t base) +/* Not needed on 64bit architectures */ +#if BITS_PER_LONG == 32 + +uint32_t __attribute__((weak)) __div64_32(uint64_t *n, uint32_t base) { uint64_t rem = *n; uint64_t b = base; @@ -51,3 +55,123 @@ uint32_t __div64_32(uint64_t *n, uint32_t base) *n = res; return rem; } + + +#ifndef div_s64_rem +s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) +{ + u64 quotient; + + if (dividend < 0) { + quotient = div_u64_rem(-dividend, abs(divisor), (u32 *)remainder); + *remainder = -*remainder; + if (divisor > 0) + quotient = -quotient; + } else { + quotient = div_u64_rem(dividend, abs(divisor), (u32 *)remainder); + if (divisor < 0) + quotient = -quotient; + } + return quotient; +} +#endif + +/** + * div64_u64_rem - unsigned 64bit divide with 64bit divisor and remainder + * @dividend: 64bit dividend + * @divisor: 64bit divisor + * @remainder: 64bit remainder + * + * This implementation is a comparable to algorithm used by div64_u64. + * But this operation, which includes math for calculating the remainder, + * is kept distinct to avoid slowing down the div64_u64 operation on 32bit + * systems. + */ +#ifndef div64_u64_rem +u64 div64_u64_rem(u64 dividend, u64 divisor, u64 *remainder) +{ + u32 high = divisor >> 32; + u64 quot; + + if (high == 0) { + u32 rem32; + quot = div_u64_rem(dividend, divisor, &rem32); + *remainder = rem32; + } else { + int n = 1 + fls(high); + quot = div_u64(dividend >> n, divisor >> n); + + if (quot != 0) + quot--; + + *remainder = dividend - quot * divisor; + if (*remainder >= divisor) { + quot++; + *remainder -= divisor; + } + } + + return quot; +} +#endif + +/** + * div64_u64 - unsigned 64bit divide with 64bit divisor + * @dividend: 64bit dividend + * @divisor: 64bit divisor + * + * This implementation is a modified version of the algorithm proposed + * by the book 'Hacker's Delight'. The original source and full proof + * can be found here and is available for use without restriction. + * + * 'http://www.hackersdelight.org/HDcode/newCode/divDouble.c.txt' + */ +#ifndef div64_u64 +u64 div64_u64(u64 dividend, u64 divisor) +{ + u32 high = divisor >> 32; + u64 quot; + + if (high == 0) { + quot = div_u64(dividend, divisor); + } else { + int n = 1 + fls(high); + quot = div_u64(dividend >> n, divisor >> n); + + if (quot != 0) + quot--; + if ((dividend - quot * divisor) >= divisor) + quot++; + } + + return quot; +} +#endif + +/** + * div64_s64 - signed 64bit divide with 64bit divisor + * @dividend: 64bit dividend + * @divisor: 64bit divisor + */ +#ifndef div64_s64 +s64 div64_s64(s64 dividend, s64 divisor) +{ + s64 quot, t; + + quot = div64_u64(abs64(dividend), abs64(divisor)); + t = (dividend ^ divisor) >> 63; + + return (quot ^ t) - t; +} +#endif + +#endif /* BITS_PER_LONG == 32 */ + +/* + * Iterative div/mod for use when dividend is not expected to be much + * bigger than divisor. + */ +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + return __iter_div_u64_rem(dividend, divisor, remainder); +} -- 1.9.1

2 2

[U-Boot] [PATCH] fixdep: remove multiple .config support code
by Masahiro Yamada 06 Mar '15

06 Mar '15

Since commit e02ee2548afe (kconfig: switch to single .config configuration), the ".*.cmd" files are not correctly created for SPL/TPL. The U-Boot extension code in fixdep, which was introduced to support the multiple .config, must be removed. Signed-off-by: Masahiro Yamada <yamada.m(a)jp.panasonic.com> --- Tom, Sorry, this is an urgent bug fix. scripts/basic/fixdep.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 1a41723..b304068 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -221,11 +221,7 @@ static void use_config(const char *m, int slen) define_config(m, slen, hash); - /* printf(" $(wildcard include/config/"); */ - /* modified for U-Boot */ - printf(" $(wildcard %sinclude/config/", - strncmp(depfile, "spl/", 4) ? - (strncmp(depfile, "tpl/", 4) ? "" : "tpl/") : "spl/"); + printf(" $(wildcard include/config/"); for (i = 0; i < slen; i++) { c = m[i]; if (c == '_') -- 1.9.1

3 2

[U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text
by Fabio Estevam 06 Mar '15

06 Mar '15

Currently the usage text for the 'ums' command looks like this: Usage: ums ums <USB_controller> [<devtype>] <devnum> e.g. ums 0 mmc 0 ,so remove the extra 'ums' in the text. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- common/cmd_usb_mass_storage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c index 2c879ea..51c3fff 100644 --- a/common/cmd_usb_mass_storage.c +++ b/common/cmd_usb_mass_storage.c @@ -159,6 +159,6 @@ exit: U_BOOT_CMD(ums, 4, 1, do_usb_mass_storage, "Use the UMS [User Mass Storage]", - "ums <USB_controller> [<devtype>] <devnum> e.g. ums 0 mmc 0\n" + "<USB_controller> [<devtype>] <devnum> e.g. ums 0 mmc 0\n" " devtype defaults to mmc" ); -- 1.9.1

6 7