December 2015 - U-Boot

[U-Boot] [PATCH 4/5][v4] armv8/ls1043ardb: SECURE BOOT target added for NOR
by Aneesh Bansal 04 Dec '15

04 Dec '15

LS1043ARDB Secure Boot Target from NOR has been added. - Configs defined to enable esbc_validate. - ESBC Address in header is made 64 bit. - SMMU is re-configured in Bypass mode. Signed-off-by: Aneesh Bansal <aneesh.bansal(a)freescale.com> --- Changes in v4: - Fixed compilation break for LS1021AQDS arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 +-- .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 6 +++- board/freescale/common/fsl_validate.c | 34 ++++++++++++++-------- board/freescale/ls1043ardb/MAINTAINERS | 5 ++++ board/freescale/ls1043ardb/ls1043ardb.c | 18 +++++++++++- common/cmd_blob.c | 6 ++-- configs/ls1043ardb_SECURE_BOOT_defconfig | 9 ++++++ include/configs/ls1043ardb.h | 10 +++++++ include/fsl_validate.h | 9 +++++- 10 files changed, 82 insertions(+), 21 deletions(-) create mode 100644 configs/ls1043ardb_SECURE_BOOT_defconfig diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index b5a2d28..6f4773a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -147,8 +147,8 @@ #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" #define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SNVS_LE -#define CONFIG_SYS_FSL_SEC_LE +#define CONFIG_SYS_FSL_SEC_MON_BE +#define CONFIG_SYS_FSL_SEC_BE #define CONFIG_SYS_FSL_SFP_BE #define CONFIG_SYS_FSL_SRK_LE #define CONFIG_KEY_REVOCATION diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 83caa91..e7def3a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -38,7 +38,7 @@ #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000) #define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000) #define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000) -#define CONFIG_SYS_SNVS_ADDR (CONFIG_SYS_IMMR + 0xe90000) +#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0xe90000) #define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0xe80200) #define CONFIG_SYS_FSL_TIMER_ADDR 0x02b00000 diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index f2d4c3c..806302b 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -11,13 +11,17 @@ #define CONFIG_CMD_ESBC_VALIDATE #define CONFIG_FSL_SEC_MON #define CONFIG_SHA_PROG_HW_ACCEL -#define CONFIG_DM #define CONFIG_RSA #define CONFIG_RSA_FREESCALE_EXP + #ifndef CONFIG_FSL_CAAM #define CONFIG_FSL_CAAM #endif +#ifndef CONFIG_DM +#define CONFIG_DM +#endif + #define CONFIG_KEY_REVOCATION #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 73b6718..b510c71 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -15,7 +15,7 @@ #include <u-boot/rsa-mod-exp.h> #include <hash.h> #include <fsl_secboot_err.h> -#ifndef CONFIG_MPC85xx +#ifdef CONFIG_LS102XA #include <asm/arch/immap_ls102xa.h> #endif @@ -99,7 +99,8 @@ int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr) struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]); - if (memcmp((u8 *)csf_hdr_addr, barker_code, ESBC_BARKER_LEN)) + if (memcmp((u8 *)(uintptr_t)csf_hdr_addr, + barker_code, ESBC_BARKER_LEN)) return -1; *csf_addr = csf_hdr_addr; @@ -117,7 +118,7 @@ static int get_ie_info_addr(u32 *ie_addr) if (get_csf_base_addr(&csf_addr, &flash_base_addr)) return -1; - hdr = (struct fsl_secboot_img_hdr *)csf_addr; + hdr = (struct fsl_secboot_img_hdr *)(uintptr_t)csf_addr; /* For SoC's with Trust Architecture v1 with corenet bus * the sg table field in CSF header has absolute address @@ -130,7 +131,7 @@ static int get_ie_info_addr(u32 *ie_addr) (((u32)hdr->psgtable & ~(CONFIG_SYS_PBI_FLASH_BASE)) + flash_base_addr); #else - sg_tbl = (struct fsl_secboot_sg_table *)(csf_addr + + sg_tbl = (struct fsl_secboot_sg_table *)(uintptr_t)(csf_addr + (u32)hdr->psgtable); #endif @@ -379,8 +380,8 @@ static int calc_img_key_hash(struct fsl_secboot_img_priv *img) #ifdef CONFIG_KEY_REVOCATION if (check_srk(img)) { ret = algo->hash_update(algo, ctx, - (u8 *)(img->ehdrloc + img->hdr.srk_tbl_off), - img->hdr.len_kr.num_srk * sizeof(struct srk_table), 1); + (u8 *)(uintptr_t)(img->ehdrloc + img->hdr.srk_tbl_off), + img->hdr.len_kr.num_srk * sizeof(struct srk_table), 1); srk = 1; } #endif @@ -438,8 +439,8 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) #ifdef CONFIG_KEY_REVOCATION if (check_srk(img)) { ret = algo->hash_update(algo, ctx, - (u8 *)(img->ehdrloc + img->hdr.srk_tbl_off), - img->hdr.len_kr.num_srk * sizeof(struct srk_table), 0); + (u8 *)(uintptr_t)(img->ehdrloc + img->hdr.srk_tbl_off), + img->hdr.len_kr.num_srk * sizeof(struct srk_table), 0); key_hash = 1; } #endif @@ -454,8 +455,13 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) return ret; /* Update hash for actual Image */ +#ifdef CONFIG_ESBC_ADDR_64BIT ret = algo->hash_update(algo, ctx, - (u8 *)img->hdr.pimg, img->hdr.img_size, 1); + (u8 *)(uintptr_t)img->hdr.pimg64, img->hdr.img_size, 1); +#else + ret = algo->hash_update(algo, ctx, + (u8 *)(uintptr_t)img->hdr.pimg, img->hdr.img_size, 1); +#endif if (ret) return ret; @@ -533,7 +539,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) { char buf[20]; struct fsl_secboot_img_hdr *hdr = &img->hdr; - void *esbc = (u8 *)img->ehdrloc; + void *esbc = (u8 *)(uintptr_t)img->ehdrloc; u8 *k, *s; #ifdef CONFIG_KEY_REVOCATION u32 ret; @@ -549,7 +555,11 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) if (memcmp(hdr->barker, barker_code, ESBC_BARKER_LEN)) return ERROR_ESBC_CLIENT_HEADER_BARKER; +#ifdef CONFIG_ESBC_ADDR_64BIT + sprintf(buf, "%llx", hdr->pimg64); +#else sprintf(buf, "%x", hdr->pimg); +#endif setenv("img_addr", buf); if (!hdr->img_size) @@ -594,7 +604,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) if (!key_found && check_ie(img)) { if (get_ie_info_addr(&img->ie_addr)) return ERROR_IE_TABLE_NOT_FOUND; - ie_info = (struct ie_key_info *)img->ie_addr; + ie_info = (struct ie_key_info *)(uintptr_t)img->ie_addr; if (ie_info->num_keys == 0 || ie_info->num_keys > 32) return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY; @@ -748,7 +758,7 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, hdr = &img->hdr; img->ehdrloc = addr; - esbc = (u8 *)img->ehdrloc; + esbc = (u8 *)(uintptr_t)img->ehdrloc; memcpy(hdr, esbc, sizeof(struct fsl_secboot_img_hdr)); diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS index efca5bf..84ffb63 100644 --- a/board/freescale/ls1043ardb/MAINTAINERS +++ b/board/freescale/ls1043ardb/MAINTAINERS @@ -7,3 +7,8 @@ F: include/configs/ls1043ardb.h F: configs/ls1043ardb_defconfig F: configs/ls1043ardb_nand_defconfig F: configs/ls1043ardb_sdcard_defconfig + +LS1043A_SECURE_BOOT BOARD +M: Aneesh Bansal <aneesh.bansal(a)freescale.com> +S: Maintained +F: configs/ls1043ardb_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index cdd50d6..9ebd12c 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -18,6 +18,8 @@ #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> +#include <environment.h> +#include <fsl_sec.h> #include "cpld.h" DECLARE_GLOBAL_DATA_PTR; @@ -123,7 +125,21 @@ int config_board_mux(void) int misc_init_r(void) { config_board_mux(); - +#ifdef CONFIG_SECURE_BOOT +#ifdef CONFIG_LS1043A + /* In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif + return sec_init(); +#endif return 0; } #endif diff --git a/common/cmd_blob.c b/common/cmd_blob.c index d3f22a1..ac8b268 100644 --- a/common/cmd_blob.c +++ b/common/cmd_blob.c @@ -73,9 +73,9 @@ static int do_blob(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) len = simple_strtoul(argv[4], NULL, 16); key_addr = simple_strtoul(argv[5], NULL, 16); - km_ptr = (uint8_t *)key_addr; - src_ptr = (uint8_t *)src_addr; - dst_ptr = (uint8_t *)dst_addr; + km_ptr = (uint8_t *)(uintptr_t)key_addr; + src_ptr = (uint8_t *)(uintptr_t)src_addr; + dst_ptr = (uint8_t *)(uintptr_t)dst_addr; if (enc) ret = blob_encap(km_ptr, src_ptr, dst_ptr, len); diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig new file mode 100644 index 0000000..d9d6c97 --- /dev/null +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -0,0 +1,9 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1043ARDB=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, SECURE_BOOT" +CONFIG_SYS_NS16550=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_DM_SPI=y \ No newline at end of file diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 7d113a0..5d82cf3 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -291,4 +291,14 @@ #define CONFIG_CMD_EXT2 #endif +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL +#define CONFIG_CMD_BLOB +/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */ +#define CONFIG_ESBC_ADDR_64BIT +#endif + +#include <asm/fsl_secure_boot.h> + #endif /* __LS1043ARDB_H__ */ diff --git a/include/fsl_validate.h b/include/fsl_validate.h index 92dd98b..a62dc74 100644 --- a/include/fsl_validate.h +++ b/include/fsl_validate.h @@ -83,7 +83,9 @@ struct fsl_secboot_img_hdr { u32 sign_len; /* length of the signature in bytes */ union { u32 psgtable; /* ptr to SG table */ +#ifndef CONFIG_ESBC_ADDR_64BIT u32 pimg; /* ptr to ESBC client image */ +#endif }; union { u32 sg_entries; /* no of entries in SG table */ @@ -97,7 +99,12 @@ struct fsl_secboot_img_hdr { u32 reserved1[2]; u32 fsl_uid_1; u32 oem_uid_1; - u32 reserved2[2]; + union { + u32 reserved2[2]; +#ifdef CONFIG_ESBC_ADDR_64BIT + u64 pimg64; /* 64 bit pointer to ESBC Image */ +#endif + }; u32 ie_flag; u32 ie_key_sel; }; -- 1.8.1.4

1 0

[U-Boot] [PATCH v6 1/6] cgtqmx6eval: Add SPI NOR flash support
by Otavio Salvador 04 Dec '15

04 Dec '15

Add SPI NOR support: => sf probe SF: Detected SST25VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- Changes in v6: - use ifdef CONFIG_MXC_SPI (Jagan) Changes in v5: None Changes in v4: None board/congatec/cgtqmx6eval/cgtqmx6eval.c | 29 +++++++++++++++++++++++++++++ include/configs/cgtqmx6eval.h | 12 ++++++++++++ 2 files changed, 41 insertions(+) diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index cf5607b..0458229 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -45,6 +45,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + #define MX6Q_QMX6_PFUZE_MUX IMX_GPIO_NR(6, 9) @@ -152,6 +156,13 @@ static iomux_v3_cfg_t enet_pads_ar8035[] = { MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; +static iomux_v3_cfg_t const ecspi1_pads[] = { + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) struct i2c_pads_info i2c_pad_info1 = { .scl = { @@ -381,6 +392,14 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); } +#ifdef CONFIG_MXC_SPI +static void setup_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); + gpio_direction_output(IMX_GPIO_NR(3, 19), 0); +} +#endif + #ifdef CONFIG_FSL_ESDHC static struct fsl_esdhc_cfg usdhc_cfg[] = { {USDHC2_BASE_ADDR}, @@ -647,6 +666,9 @@ int board_early_init_f(void) setup_iomux_uart(); setup_display(); +#ifdef CONFIG_MXC_SPI + setup_spi(); +#endif return 0; } @@ -671,6 +693,13 @@ int checkboard(void) return 0; } +#ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -EINVAL; +} +#endif + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index e0aa4b0..9aa66c7 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -29,6 +29,16 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 +/* SPI NOR */ +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) + /* Miscellaneous commands */ #define CONFIG_CMD_BMODE @@ -200,8 +210,10 @@ "else " \ "bootz; " \ "fi;\0" \ + "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\ #define CONFIG_BOOTCOMMAND \ + "run spilock;" \ "mmc dev ${mmcdev};" \ "if mmc rescan; then " \ "if run loadbootscript; then " \ -- 2.6.2

4 18

[U-Boot] am335x. u-boot.img fails to start
by Yegor Yefremov 04 Dec '15

04 Dec '15

git master fails to start u-boot.img on at least am335x_evm_defconfig some other similar boards: U-Boot SPL 2016.01-rc1-00373-gbe30dfb (Dec 04 2015 - 08:51:13) Trying to boot from MMC reading args spl_load_image_fat_os: error reading image args, err - -1 reading u-boot.img reading u-boot.img Compiler used: arm-linux-gnueabihf-gcc -v Using built-in specs. COLLECT_GCC=arm-linux-gnueabihf-gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/arm-linux-gnueabihf/4.9/lto-wrapper Target: arm-linux-gnueabihf Configured with: ../src/configure -v --with-pkgversion=' 4.9.2-10' --with-bugurl=file:///usr/share/doc/gcc-4.9/README.Bugs --enable-languages=c,c++,go,fortran,objc --prefix=/usr --program-suffix=-4.9 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.9 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libitm --disable-libquadmath --enable-plugin --with-system-zlib --enable-objc-gc --enable-multiarch --disable-sjlj-exceptions --with-arch=armv7-a --with-fpu=vfpv3-d16 --with-float=hard --with-mode=thumb --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- Thread model: posix gcc version 4.9.2 ( 4.9.2-10) Any idea? Regards, Yegor

3 4

[U-Boot] [PATCH 1/2] spi: Get spi-3wire from dts
by Jagan Teki 04 Dec '15

04 Dec '15

spi-3wire is used when SI/SO signals shared so get the same from dts node and assign to mode on slave plat->mode. Cc: Simon Glass <sjg(a)chromium.org> Signed-off-by: Jagan Teki <jteki(a)openedev.com> --- drivers/spi/spi-uclass.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index 3c7d64a..e0f6b25 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -378,6 +378,8 @@ int spi_slave_ofdata_to_platdata(const void *blob, int node, mode |= SPI_CPHA; if (fdtdec_get_bool(blob, node, "spi-cs-high")) mode |= SPI_CS_HIGH; + if (fdtdec_get_bool(blob, node, "spi-3wire")) + mode |= SPI_3WIRE; if (fdtdec_get_bool(blob, node, "spi-half-duplex")) mode |= SPI_PREAMBLE; plat->mode = mode; -- 1.9.1

2 5

[U-Boot] [PATCH] imx: mx7dsabresd: Add QSPI support
by Peng Fan 04 Dec '15

04 Dec '15

Support qspi flashes for mx7dsabresd 1. introduce pin mux settings 2. enable qspi clock 3. introduce related macro definitions Default QSPI is not enabled, since we need hardware rework to use QSPI, see SPF-28590, page 9: " QSPI signals are muxed with EPDC_D[7:0] When using QSPI: de-populate R388-R391, R396-R399 populate R392-R395, R299, R300 " After hardware rework, define CONFIG_FSL_QSPI in mx7dsabresd.h. qspi flashes can be deteced and read/erase/write. Log info: " => sf probe SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB => sf read 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Read: OK => sf erase 0 0x4000000 SF: 67108864 bytes @ 0x0 Erased: OK => sf write 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Written: OK " Signed-off-by: Peng Fan <Peng.Fan(a)freescale.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Fabio Estevam <fabio.estevam(a)freescale.com> Cc: Adrian Alonso <aalonso(a)freescale.com> --- board/freescale/mx7dsabresd/mx7dsabresd.c | 30 ++++++++++++++++++++++++++++++ include/configs/mx7dsabresd.h | 15 +++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index 6c863da..f8ae973 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -44,6 +44,9 @@ DECLARE_GLOBAL_DATA_PTR; #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ PAD_CTL_DSE_3P3V_49OHM) +#define QSPI_PAD_CTRL \ + (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ @@ -455,6 +458,29 @@ int board_phy_config(struct phy_device *phydev) } #endif +#ifdef CONFIG_FSL_QSPI +static iomux_v3_cfg_t const quadspi_pads[] = { + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL), +}; + +int board_qspi_init(void) +{ + /* Set the iomux */ + imx_iomux_v3_setup_multiple_pads(quadspi_pads, + ARRAY_SIZE(quadspi_pads)); + + /* Set the clock */ + set_clk_qspi(); + + return 0; +} +#endif + int board_early_init_f(void) { setup_iomux_uart(); @@ -481,6 +507,10 @@ int board_init(void) setup_lcd(); #endif +#ifdef CONFIG_FSL_QSPI + board_qspi_init(); +#endif + return 0; } diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index cc98547..22e515c 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -236,4 +236,19 @@ #define CONFIG_VIDEO_BMP_LOGO #endif +#ifdef CONFIG_FSL_QSPI +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_MACRONIX +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 40000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define FSL_QSPI_FLASH_NUM 1 +#define FSL_QSPI_FLASH_SIZE SZ_64M +#define QSPI0_BASE_ADDR QSPI1_IPS_BASE_ADDR +#define QSPI0_AMBA_BASE QSPI0_ARB_BASE_ADDR +#endif + #endif /* __CONFIG_H */ -- 2.6.2

4 5

[U-Boot] [PATCH v3 01/14] ARM: zynq: Remove PHYLIB from config to defconfig
by Michal Simek 04 Dec '15

04 Dec '15

Move PHYLIB from board config to defconfig Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- Changes in v3: None Changes in v2: None configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + include/configs/zynq-common.h | 1 - 11 files changed, 10 insertions(+), 1 deletion(-) diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 3bf17cfc7ab7..0608d8a733cf 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 600ca8b2f347..d6f0ce388832 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -8,3 +8,4 @@ CONFIG_SPL=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHYLIB=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index e3c1e23638ff..8318b94ecbb2 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -14,4 +14,5 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index eaf15f2d700c..533aff9a7531 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 381ace8ace6f..689d19e992da 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -17,5 +17,6 @@ CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y CONFIG_ZYNQ_SPI=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 49dd02554c88..c7125c304ab8 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM011" CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHYLIB=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index d50594371aaa..a8f28da11767 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -10,3 +10,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHYLIB=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index c2ae2ab2809d..6b2fd8ca4ebb 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -12,3 +12,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHYLIB=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index f603bb360106..4076c30707b1 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -15,4 +15,5 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y CONFIG_ZYNQ_QSPI=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 1227b7a14c32..c51049e664b1 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -11,6 +11,7 @@ CONFIG_FIT_SIGNATURE=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_PHYLIB=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xe0001000 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index fa83ac7b15d0..a9e6bf046a97 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -50,7 +50,6 @@ # define CONFIG_ZYNQ_GEM # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_PHYLIB # define CONFIG_PHY_MARVELL # define CONFIG_BOOTP_SERVERIP # define CONFIG_BOOTP_BOOTPATH -- 1.9.1

6 30

[U-Boot] [PATCHv5 1/2] arm: socfpga: arria10: add reset manager for Arria10
by dinguyen＠opensource.altera.com 04 Dec '15

04 Dec '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Add the defines for the reset manager and some basic reset functionality. Signed-off-by: Dinh Nguyen <dinguyen(a)opensource.altera.com> --- v5: rename the mod_reest on A10 to match those in gen5 v4: rename mod_reset names to be used by both gen5 and a10 v3: remove duplicate reset function use CONFIG_SOCFPGA_GEN5 v2: integrate into a5/c5 reset manager --- arch/arm/mach-socfpga/include/mach/reset_manager.h | 65 ++++++++++++++++++++++ arch/arm/mach-socfpga/reset_manager.c | 24 +++++++- 2 files changed, 88 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h index e50fbd8..6ddba18 100644 --- a/arch/arm/mach-socfpga/include/mach/reset_manager.h +++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h @@ -15,6 +15,7 @@ void socfpga_bridges_reset(int enable); void socfpga_per_reset(u32 reset, int set); void socfpga_per_reset_all(void); +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) struct socfpga_reset_manager { u32 status; u32 ctrl; @@ -28,6 +29,42 @@ struct socfpga_reset_manager { u32 padding2[12]; u32 tstscratch; }; +#else +struct socfpga_reset_manager { + u32 stat; + u32 ramstat; + u32 miscstat; + u32 ctrl; + u32 hdsken; + u32 hdskreq; + u32 hdskack; + u32 counts; + u32 mpu_mod_reset; + u32 per_mod_reset; /* stated as per0_mod_reset in A10 datasheet */ + u32 per2_mod_reset; /* stated as per1_mod_reset in A10 datasheet */ + u32 brg_mod_reset; + u32 misc_mod_reset; /* stated as sys_mod_reset in A10 datasheet */ + u32 coldmodrst; + u32 nrstmodrst; + u32 dbgmodrst; + u32 mpuwarmmask; + u32 per0warmmask; + u32 per1warmmask; + u32 brgwarmmask; + u32 syswarmmask; + u32 nrstwarmmask; + u32 l3warmmask; + u32 tststa; + u32 tstscratch; + u32 hdsktimeout; + u32 hmcintr; + u32 hmcintren; + u32 hmcintrens; + u32 hmcintrenr; + u32 hmcgpout; + u32 hmcgpin; +}; +#endif #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2 @@ -55,6 +92,7 @@ struct socfpga_reset_manager { #define RSTMGR_BANK(_reset) \ (((_reset) >> RSTMGR_BANK_OFFSET) & RSTMGR_BANK_MASK) +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) /* * SocFPGA Cyclone V/Arria V reset IDs, bank mapping is as follows: * 0 ... mpumodrst @@ -74,6 +112,33 @@ struct socfpga_reset_manager { #define RSTMGR_SDMMC RSTMGR_DEFINE(1, 22) #define RSTMGR_DMA RSTMGR_DEFINE(1, 28) #define RSTMGR_SDR RSTMGR_DEFINE(1, 29) +#else +/* + * SocFPGA Arria10 reset IDs, bank mapping is as follows: + * 0 ... mpumodrst + * 1 ... per0modrst + * 2 ... per1modrst + * 3 ... brgmodrst + * 4 ... sysmodrst + */ +#define RSTMGR_EMAC0 RSTMGR_DEFINE(1, 0) +#define RSTMGR_EMAC1 RSTMGR_DEFINE(1, 1) +#define RSTMGR_EMAC2 RSTMGR_DEFINE(1, 2) +#define RSTMGR_L4WD0 RSTMGR_DEFINE(2, 0) +#define RSTMGR_L4WD1 RSTMGR_DEFINE(2, 1) +#define RSTMGR_L4SYSTIMER0 RSTMGR_DEFINE(2, 2) +#define RSTMGR_L4SYSTIMER1 RSTMGR_DEFINE(2, 3) +#define RSTMGR_SPTIMER0 RSTMGR_DEFINE(2, 4) +#define RSTMGR_SPTIMER1 RSTMGR_DEFINE(2, 5) +#define RSTMGR_UART0 RSTMGR_DEFINE(2, 16) +#define RSTMGR_UART1 RSTMGR_DEFINE(2, 17) +#define RSTMGR_SPIM0 RSTMGR_DEFINE(1, 17) +#define RSTMGR_SPIM1 RSTMGR_DEFINE(1, 18) +#define RSTMGR_QSPI RSTMGR_DEFINE(1, 6) +#define RSTMGR_SDMMC RSTMGR_DEFINE(1, 7) +#define RSTMGR_DMA RSTMGR_DEFINE(1, 16) +#define RSTMGR_DDRSCH RSTMGR_DEFINE(3, 6) +#endif /* Create a human-readable reference to SoCFPGA reset. */ #define SOCFPGA_RESET(_name) RSTMGR_##_name diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c index b6beaa2..d0ff6c4 100644 --- a/arch/arm/mach-socfpga/reset_manager.c +++ b/arch/arm/mach-socfpga/reset_manager.c @@ -18,7 +18,9 @@ static const struct socfpga_reset_manager *reset_manager_base = static struct socfpga_system_manager *sysmgr_regs = (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; -/* Assert or de-assert SoCFPGA reset manager reset. */ +/* + * Assert or de-assert SoCFPGA reset manager reset. + */ void socfpga_per_reset(u32 reset, int set) { const void *reg; @@ -46,13 +48,29 @@ void socfpga_per_reset(u32 reset, int set) * Assert reset on every peripheral but L4WD0. * Watchdog must be kept intact to prevent glitches * and/or hangs. + * For the Arria10, we disable all the peripherals except L4 watchdog0, + * L4 Timer 0, and ECC. */ void socfpga_per_reset_all(void) { +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) const u32 l4wd0 = 1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)); writel(~l4wd0, &reset_manager_base->per_mod_reset); writel(0xffffffff, &reset_manager_base->per2_mod_reset); +#else + const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) | + (1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0)))); + + unsigned mask_ecc_ocp = 0x0000FF00; + + /* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */ + writel(~l4wd0, &reset_manager_base->per1_mod_reset); + setbits_le32(&reset_manager_base->per0_mod_reset, ~mask_ecc_ocp); + + /* Finally disable the ECC_OCP */ + setbits_le32(&reset_manager_base->per0_mod_reset, mask_ecc_ocp); +#endif } /* @@ -71,6 +89,7 @@ void reset_cpu(ulong addr) ; } +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) /* * Release peripherals from reset based on handoff */ @@ -78,6 +97,7 @@ void reset_deassert_peripherals_handoff(void) { writel(0, &reset_manager_base->per_mod_reset); } +#endif #if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) void socfpga_bridges_reset(int enable) @@ -92,6 +112,7 @@ void socfpga_bridges_reset(int enable) void socfpga_bridges_reset(int enable) { +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK | L3REGS_REMAP_HPS2FPGA_MASK | L3REGS_REMAP_OCRAM_MASK; @@ -116,5 +137,6 @@ void socfpga_bridges_reset(int enable) /* Remap the bridges into memory map */ writel(l3mask, SOCFPGA_L3REGS_ADDRESS); } +#endif } #endif -- 2.6.2

2 2

[U-Boot] [PATCH] arm: socfpga: fix trivial header preprocessor for socfpga_common.h
by dinguyen＠opensource.altera.com 04 Dec '15

04 Dec '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Replace__CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ with __CONFIG_SOCFPGA_OMMON_H__ as the file is now called socfpga_common.h Signed-off-by: Dinh Nguyen <dinguyen(a)opensource.altera.com> --- include/configs/socfpga_common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index b3f65b6..99a1c53 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -3,8 +3,8 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ -#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ +#ifndef __CONFIG_SOCFPGA_COMMON_H__ +#define __CONFIG_SOCFPGA_OMMON_H__ /* Virtual target or real hardware */ @@ -326,4 +326,4 @@ unsigned int cm_get_qspi_controller_clk_hz(void); */ #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */ +#endif /* __CONFIG_SOCFPGA_COMMON_H__ */ -- 2.6.2

2 1

[U-Boot] [PATCH] ARMv7l: fix MAX_TFTP_PATH_LEN size for nixos compatibility
by Joachim Schiele 04 Dec '15

04 Dec '15

hey, i've been using the master branch of u-boot on the odroid xu4 now! i had to write this patch in order to make it work with NIXOS. would be great if you could apply it. please review it, not 100% sure if it is correct. best wishes, joachim MAX_TFTP_PATH_LEN-increase.patch A patch to make NixOS on the Odroid XU4 booting with U-Boot/extlinux possible. If not applied U-Boot can't process the long string: FDTDIR ../nixos/ccn1vfjww519c56wy8jkc0p6acw4asf3-linux-4.2.0-5eb40d45b291ee129cbfac2073f1ca7aa32ff4c5-dtbs/exynos5422-odroidxu4.dtb --- diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index 080b376..67dd647 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -19,7 +19,7 @@ #include "menu.h" #include "cli.h" -#define MAX_TFTP_PATH_LEN 127 +#define MAX_TFTP_PATH_LEN 512 const char *pxe_default_paths[] = { #ifdef CONFIG_SYS_SOC

1 0

[U-Boot] [PATCHv4 0/9] ARM: socfpga: Add minimal support for Arria10
by dinguyen＠opensource.altera.com 03 Dec '15

03 Dec '15

From: Dinh Nguyen <dinguyen(a)opensource.altera.com> Hi, This is v4 of the patch series that adds minimal support for Altera's Arria10 platform. v4: - s/CONFIG_SOCFPGA_GEN5/CONFIG_TARGET_SOCFPGA_GEN5 - rename mod_reset(s) in the gen5 reset manager to match a10 - clean up of #if-else throughout misc.c - reorder CONFIG_TARGET_SOCFPGA_ARRIA10 - add SYSMGR_SDMMC_DRVSEL_SHIFT - s/SYSMGR_SDMMC_SMPSEL_SHIFT/SYSMGR_SDMMC_SMPLSEL_SHIFT v3: - Add CONFIG_SOCFPGA_GEN5 for building for Arria5 and Cyclone5 - Clean up socfpga_arria10_socdk - Add patch to remove the macro SYSMGR_SDMMC_CTRL_SET - Move system_manager_a10.h into system_manager.h - Rebase to u-boot-socfpga/master v2: - Removes the need for a separate /mach-socfpga/arria10 directory - Tries to re-use alot of the Arria5/Cyclone5 code - Removes the usage of unions bitfields in the SDRAM defines v1: The series builds for the Altera Arria10 SoCDK, but is not entirely functional on the hardware yet. This series really just add the defines, build and Kconfig layout for Arria10. There are few TODO after this series: - Add DTS file for the devkit - Add clock manager - The Arria10 Pin Mux requires the FPGA to get programmed before the SDRAM controller can be usable. So another patch is needed to make use of the fpga manager to program the FPGA within the limited size of the OCRAM. Thanks, Dinh Nguyen (9): arm: socfpga: introduce TARGET_SOCFPGA_GEN5 config property arm: socfpga: arria10: add system manager defines arm: socfpga: arria10: add reset manager for Arria10 arm: socfpga: arria10: add misc functions for Arria10 arm: socfpga: arria10: add socfpga_arria10_socdk config arm: socfpga: arria10: add socfpga_arria10_defconfig arm: socfpga: arria10: add config option build for arria10 arm: socfpga: remove building scan manager arm: socfpga: fix up a questionable macro for SDMMC arch/arm/Kconfig | 4 +- arch/arm/mach-socfpga/Kconfig | 15 +++ arch/arm/mach-socfpga/Makefile | 5 +- arch/arm/mach-socfpga/include/mach/reset_manager.h | 71 ++++++++++- .../arm/mach-socfpga/include/mach/system_manager.h | 132 ++++++++++++++++++++- arch/arm/mach-socfpga/misc.c | 51 ++++++++ arch/arm/mach-socfpga/reset_manager.c | 36 ++++-- configs/socfpga_arria10_defconfig | 16 +++ drivers/mmc/socfpga_dw_mmc.c | 5 +- include/configs/socfpga_arria10_socdk.h | 94 +++++++++++++++ 10 files changed, 410 insertions(+), 19 deletions(-) create mode 100644 configs/socfpga_arria10_defconfig create mode 100644 include/configs/socfpga_arria10_socdk.h -- 2.6.2

4 22