July 2014 - U-Boot

Re: [U-Boot] Hi, Problem about verify uboot
by Simon Glass 23 Jul '14

23 Jul '14

(copying the mailing list - but please do this yourself from now on - note you will need to join it first if you have not already) Hi, On 23 July 2014 03:20, Duxiaoqiang <duxiaoqiang(a)huawei.com> wrote: > Hi Simon > > > > When I verified secure UBOOT with FIT image, I found a problem about > it, and maybe need your help. Details about the problem please see below. > > > > Ø Use mkimage tool to generate a fit.img file which contains a Linux image > and a fdt file. > > Ø Boot fit.img with bootm command: bootm 0xxxxxxxxx > > Ø Verify hash value about the image and fdt was success. But after verify > step, there was a synchronous abort exception(data alignment problem) > > Ø I trace the source code, and found that the error occurred in function > boot_fdt_add_mem_rsv_regions->fdt_num_mem_rsv->(_fdt_mem_rsv)->size; > > _fdt_mem_rsv function will return a pointer point to the reserve memory > space about fdt section in image, and in my environment the value is > 0x985a051c, but the type of size is unsigned long long. > > This is the reason why the synchronous abort exception happened. > > And I I trace the address value of fdt_blob, it is 0x985a04f4, also > un-alignment to 8 bytes. > > I guess the layout space of fdt was decided by mkimage tool. > > > > My question is: > > 1) I think it is a common problem, is there any precedent, and what is > the solution. I'm not quite sure of the problem. > > 2) Is there any solutions to force the start address of fdt_blob be > align with 8 bytes? Yes this is set by setup_fdt() in board_f.c, assuming you are using CONFIG_SYS_GENERIC_BOARD. For the CONFIG_OF_SEPARATE case you probably need to make sure that u-boot.bin is a multiple of 8 bytes long. You can do this by adding alignment into the .lds file for your board before the _end or _image_end symbol. Regards, Simon

1 0

[U-Boot] [PATCH] board/freescale: use generic board architecture for t2080qds and t2080rdb
by Shengzhou Liu 23 Jul '14

23 Jul '14

Tested with NOR boot and NAND boot on T2080QDS and T2080RDB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- based on 'next' branch. include/configs/T208xQDS.h | 2 ++ include/configs/T208xRDB.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 9b81ff7..784310a 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -11,6 +11,8 @@ #ifndef __T208xQDS_H #define __T208xQDS_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC #define CONFIG_SPI_FLASH diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 5d10ad2..deeabae 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -11,6 +11,8 @@ #ifndef __T2080RDB_H #define __T2080RDB_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_T2080RDB #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC -- 1.8.0

1 0

[U-Boot] [PATCH] ARM: zynq: Enable generic board for Xilinx Zynq
by Michal Simek 23 Jul '14

23 Jul '14

Enable CONFIG_SYS_GENERIC_BOARD for all Zynq boards. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- include/configs/zynq-common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 8e0f93599fc4..153f3fe73d70 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -334,4 +334,6 @@ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_GENERIC_BOARD + #endif /* __CONFIG_ZYNQ_COMMON_H */ -- 1.8.2.3

2 1

[U-Boot] Please update doc/git-mailrc
by Masahiro Yamada 23 Jul '14

23 Jul '14

Hello Andy Freming, All the emails sent to your email address <afleming(a)freescale.com> have been bouncing. If Andy Fleming <afleming(a)freescale.com> is no longer valid address, could you update the following line in doc/git-mailrc, please? alias afleming Andy Fleming <afleming(a)freescale.com> Best Regards Masahiro Yamada

1 0

[U-Boot] [RFC PATCH] Fix bug in T4240QDS code. Don't access nonexistent registers
by Vasili Galka 23 Jul '14

23 Jul '14

The code in misc_init_r() verifies actual SERDES clocks versus expected. It supposes that the number of clocks is MAX_SERDES. However, the number of pllcr0 registers is only SRDS_MAX_BANK. This clearly results in access to wrong memory. I don't have the datasheet to design a correct solution, but at least let's change it to access only the existing registers. Signed-off-by: Vasili Galka <vvv444(a)gmail.com> Cc: York Sun <yorksun(a)freescale.com> --- board/freescale/t4qds/t4240qds.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index fe1bc7f..6646042 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -662,7 +662,7 @@ int misc_init_r(void) } } - for (i = 0; i < MAX_SERDES; i++) { + for (i = 0; i < SRDS_MAX_BANK; i++) { u32 pllcr0 = srds_regs->bank[i].pllcr0; u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; if (expected != actual[i]) { -- 1.7.9

3 4

[U-Boot] [PATCH] powerpc/t104xrdb: Add T1042RDB board support
by Vijay Rai 23 Jul '14

23 Jul '14

T1042RDB is Freescale Reference Design Board supporting the T1042 QorIQ Power Architecture processor. T1042 is a reduced personality of T1040 SoC without Integrated 8-port Gigabit. The board is designed with low power features targeted for Printing Image Market. T1042RDB board Overview ----------------------- - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration - RegEx Pattern Matching Acceleration - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Two on-board RGMII 10/100/1G ethernet ports. - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and Interleaving - IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, ?DDRCLK?) - SERDES clocks - Video - DIU supports video at up to 1280x1024x32bpp - HDMI connector - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V(a)1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Device connected: EEPROM, thermal monitor, VID controller, RTC - Other IO - Two Serial ports - ProfiBus port T1042RDB is configured as serdes protocol 0x86 which can support following interfaces 2 RGMIIS on DTSEC4, DTSEC5 1 SGMII on DTSEC3 Comments updated for 0x06 protocol in place of 0x66 protocol for T1042RDB_PI This patch also does minor clean ups for fdt defines for T1042RDB_PI board Signed-off-by: Vijay Rai <vijay.rai(a)freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain(a)freescale.com> --- board/freescale/t104xrdb/t1042_rcw.cfg | 2 +- boards.cfg | 1 + include/configs/T104xRDB.h | 15 +++++++++------ 3 files changed, 11 insertions(+), 7 deletions(-) diff --git a/board/freescale/t104xrdb/t1042_rcw.cfg b/board/freescale/t104xrdb/t1042_rcw.cfg index a3ea8ad..57de89a 100644 --- a/board/freescale/t104xrdb/t1042_rcw.cfg +++ b/board/freescale/t104xrdb/t1042_rcw.cfg @@ -1,6 +1,6 @@ #PBL preamble and RCW header aa55aa55 010e0100 -# serdes protocol 0x66 +# serdes protocol 0x06 0c18000e 0e000000 00000000 00000000 06000002 00400002 e8106000 01000000 00000000 00000000 00000000 00030810 diff --git a/boards.cfg b/boards.cfg index b8cfead..a989ea2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -961,6 +961,7 @@ Active powerpc mpc85xx - freescale t104xrdb Active powerpc mpc85xx - freescale t104xrdb T1040RDB_SDCARD T104xRDB:PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD - Active powerpc mpc85xx - freescale t104xrdb T1040RDB_SECURE_BOOT T104xRDB:PPC_T1040,SECURE_BOOT,T1040RDB Aneesh Bansal <aneesh.bansal(a)freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1040RDB_SPIFLASH T104xRDB:PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH Priyanka Jain <Priyanka.Jain(a)freescale.com> +Active powerpc mpc85xx - freescale t104xrdb T1042RDB T104xRDB:PPC_T1042,T1042RDB Priyanka Jain <Priyanka.Jain(a)freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T104xRDB:PPC_T1042,T1042RDB_PI Priyanka Jain <Priyanka.Jain(a)freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI_NAND T104xRDB:PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND Priyanka Jain <Priyanka.Jain(a)freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI_SDCARD T104xRDB:PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD - diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 8d6c51b..0e6b2e8 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -451,7 +451,7 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#ifdef CONFIG_T1040RDB +#if defined (CONFIG_T1040RDB) || defined (CONFIG_T1042RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif @@ -603,7 +603,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#ifdef CONFIG_T1040RDB +#if defined (CONFIG_T1040RDB) || defined (CONFIG_T1042RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -632,7 +632,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#ifdef CONFIG_T1040RDB +#if defined (CONFIG_T1040RDB) || defined (CONFIG_T1042RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -656,7 +656,7 @@ #endif #ifdef CONFIG_FMAN_ENET -#ifdef CONFIG_T1040RDB +#if defined (CONFIG_T1040RDB) || defined (CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 #endif #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 @@ -763,8 +763,11 @@ #define FDTFILE "t1040rdb/t1040rdb.dtb" #define RAMDISKFILE "t1040rdb/ramdisk.uboot" #elif CONFIG_T1042RDB_PI -#define FDTFILE "t1040rdb_pi/t1040rdb_pi.dtb" -#define RAMDISKFILE "t1040rdb_pi/ramdisk.uboot" +#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" +#define RAMDISKFILE "t1042rdb_pi/ramdisk.uboot" +#elif CONFIG_T1042RDB +#define FDTFILE "t1042rdb/t1042rdb.dtb" +#define RAMDISKFILE "t1042rdb/ramdisk.uboot" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ -- 1.7.9.5

2 1

[U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2
by Shaveta Leekha 22 Jul '14

22 Jul '14

CPC1 is not being enabled by default as powerpc is supposed to use only CPC2. Signed-off-by: Shaveta Leekha <shaveta(a)freescale.com> Signed-off-by: Sandeep Singh <Sandeep(a)freescale.com> --- include/configs/B4860QDS.h | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-) diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 1af9ba6..53fdac7 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -820,8 +820,14 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE ulpi +#ifdef CONFIG_PPC_B4860 +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,en_cpc:cpc2," +#else +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=null," \ + HWCONFIG \ "bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ -- 1.7.6.GIT

2 1

[U-Boot] [PATCH 0/2] Now all the M68K boards can be cleanly built
by Masahiro Yamada 22 Jul '14

22 Jul '14

This series consists of two fixes. With this series and the crosstools distributed on www.kernel.org, M68K boards can be built without any warnings. You can download it from: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ x86_64-gcc-4.9.0-nolibc_m68k-linux.tar.xz My build log is as follows: $ m68k-linux-gcc --version m68k-linux-gcc (GCC) 4.9.0 Copyright (C) 2014 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ CROSS_COMPILE=m68k-linux- ./MAKEALL -a m68k Configuring for M52277EVB - Board: M52277EVB, Options: SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000 text data bss dec hex filename 115847 11542 4096 131485 2019d ./u-boot Configuring for M52277EVB_stmicro - Board: M52277EVB, Options: CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000 text data bss dec hex filename 115474 11542 4100 131116 2002c ./u-boot Configuring for M5235EVB - Board: M5235EVB, Options: SYS_TEXT_BASE=0xFFE00000 text data bss dec hex filename 132258 12240 21132 165630 286fe ./u-boot Configuring for M5235EVB_Flash32 - Board: M5235EVB, Options: NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000 text data bss dec hex filename 132258 12240 21132 165630 286fe ./u-boot Configuring for cobra5272 board... text data bss dec hex filename 112166 9360 19880 141406 2285e ./u-boot Configuring for eb_cpu5282 - Board: eb_cpu5282, Options: SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400 text data bss dec hex filename 117802 12608 59632 190042 2e65a ./u-boot Configuring for eb_cpu5282_internal - Board: eb_cpu5282, Options: SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418 text data bss dec hex filename 117871 12612 59632 190115 2e6a3 ./u-boot Configuring for TASREG board... text data bss dec hex filename 173998 10290 4784 189072 2e290 ./u-boot Configuring for M5208EVBE board... text data bss dec hex filename 125563 11252 22852 159667 26fb3 ./u-boot Configuring for M5249EVB board... text data bss dec hex filename 107905 8654 4224 120783 1d7cf ./u-boot Configuring for M5253DEMO board... text data bss dec hex filename 153476 11348 222476 387300 5e8e4 ./u-boot Configuring for M5272C3 board... text data bss dec hex filename 126385 10676 20588 157649 267d1 ./u-boot Configuring for M5275EVB board... text data bss dec hex filename 134047 12284 21016 167347 28db3 ./u-boot Configuring for M5282EVB board... text data bss dec hex filename 124852 10544 21100 156496 26350 ./u-boot Configuring for astro_mcf5373l board... text data bss dec hex filename 130047 12516 10304 152867 25523 ./u-boot Configuring for M53017EVB board... text data bss dec hex filename 151345 11564 22268 185177 2d359 ./u-boot Configuring for M5329AFEE - Board: M5329EVB, Options: NANDFLASH_SIZE=0 text data bss dec hex filename 176789 28016 22896 227701 37975 ./u-boot Configuring for M5329BFEE - Board: M5329EVB, Options: NANDFLASH_SIZE=16 text data bss dec hex filename 176793 28016 22896 227705 37979 ./u-boot Configuring for M5373EVB - Board: M5373EVB, Options: NANDFLASH_SIZE=16 text data bss dec hex filename 176811 28016 22896 227723 3798b ./u-boot Configuring for M54418TWR - Board: M54418TWR, Options: CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 text data bss dec hex filename 110939 10362 11620 132921 20739 ./u-boot Configuring for M54418TWR_nand_mii - Board: M54418TWR, Options: SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 text data bss dec hex filename 109786 10226 11620 131632 20230 ./u-boot Configuring for M54418TWR_nand_rmii - Board: M54418TWR, Options: SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 text data bss dec hex filename 109786 10226 11620 131632 20230 ./u-boot Configuring for M54418TWR_nand_rmii_lowfreq - Board: M54418TWR, Options: SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 text data bss dec hex filename 109830 10226 11620 131676 2025c ./u-boot Configuring for M54418TWR_serial_mii - Board: M54418TWR, Options: CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 text data bss dec hex filename 110939 10362 11620 132921 20739 ./u-boot Configuring for M54418TWR_serial_rmii - Board: M54418TWR, Options: CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 text data bss dec hex filename 110939 10362 11620 132921 20739 ./u-boot Configuring for M54451EVB - Board: M54451EVB, Options: SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000 text data bss dec hex filename 124083 11792 21220 157095 265a7 ./u-boot Configuring for M54451EVB_stmicro - Board: M54451EVB, Options: CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000 text data bss dec hex filename 123716 11784 21224 156724 26434 ./u-boot Configuring for M54455EVB - Board: M54455EVB, Options: SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333 text data bss dec hex filename 167701 13486 221212 402399 623df ./u-boot Configuring for M54455EVB_a66 - Board: M54455EVB, Options: SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666 text data bss dec hex filename 167701 13486 221212 402399 623df ./u-boot Configuring for M54455EVB_i66 - Board: M54455EVB, Options: SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666 text data bss dec hex filename 167663 13486 221212 402361 623b9 ./u-boot Configuring for M54455EVB_intel - Board: M54455EVB, Options: SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333 text data bss dec hex filename 167663 13486 221212 402361 623b9 ./u-boot Configuring for M54455EVB_stm33 - Board: M54455EVB, Options: SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333 text data bss dec hex filename 167504 13486 221212 402202 6231a ./u-boot Configuring for M5475AFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64 text data bss dec hex filename 165234 17308 151404 333946 5187a ./u-boot Configuring for M5475BFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16 text data bss dec hex filename 165802 17308 152172 335282 51db2 ./u-boot Configuring for M5475CFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL text data bss dec hex filename 165802 17308 152172 335282 51db2 ./u-boot Configuring for M5475DFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL text data bss dec hex filename 165234 17308 151404 333946 5187a ./u-boot Configuring for M5475EFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL text data bss dec hex filename 165234 17308 151404 333946 5187a ./u-boot Configuring for M5475FFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64 text data bss dec hex filename 165838 17308 152172 335318 51dd6 ./u-boot Configuring for M5475GFE - Board: M5475EVB, Options: SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64 text data bss dec hex filename 165234 17308 151404 333946 5187a ./u-boot Configuring for M5485AFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64 text data bss dec hex filename 164704 17264 151404 333372 5163c ./u-boot Configuring for M5485BFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16 text data bss dec hex filename 165272 17264 152172 334708 51b74 ./u-boot Configuring for M5485CFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL text data bss dec hex filename 165272 17264 152172 334708 51b74 ./u-boot Configuring for M5485DFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL text data bss dec hex filename 164704 17264 151404 333372 5163c ./u-boot Configuring for M5485EFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL text data bss dec hex filename 164704 17264 151404 333372 5163c ./u-boot Configuring for M5485FFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64 text data bss dec hex filename 165308 17264 152172 334744 51b98 ./u-boot Configuring for M5485GFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 text data bss dec hex filename 164704 17264 151404 333372 5163c ./u-boot Configuring for M5485HFE - Board: M5485EVB, Options: SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO text data bss dec hex filename 165272 17264 152172 334708 51b74 ./u-boot Configuring for M5253EVBE board... text data bss dec hex filename 135677 9760 200128 345565 545dd ./u-boot --------------------- SUMMARY ---------------------------- Boards compiled: 48 ---------------------------------------------------------- Masahiro Yamada (2): m68k: fix an undefined behavior warning of M5253DEMO board m68k: define __kernel_size_t as unsinged int again arch/m68k/include/asm/posix_types.h | 2 +- board/freescale/m5253demo/flash.c | 10 ++++++---- 2 files changed, 7 insertions(+), 5 deletions(-) -- 1.9.1

2 5

[U-Boot] [PATCH] .gitignore: clean-up unnecessary entries
by Masahiro Yamada 22 Jul '14

22 Jul '14

There have been /errlog and /reloc_off in the top level .gitignore since commit 1b4aaffe added it about 7 years ago. But they are no longer generated. Signed-off-by: Masahiro Yamada <yamada.m(a)jp.panasonic.com> --- .gitignore | 4 ---- 1 file changed, 4 deletions(-) diff --git a/.gitignore b/.gitignore index e0c3d48..230f9b6 100644 --- a/.gitignore +++ b/.gitignore @@ -44,11 +44,7 @@ # # Generated files # - /LOG -/errlog -/reloc_off - /spl/ /tpl/ -- 1.9.1

2 1

[U-Boot] [PATCH v2 0/3] Add .mailmap file and a tool to maintain it
by Masahiro Yamada 22 Jul '14

22 Jul '14

Changes in v2: - Fix a typo in comments. Masahiro Yamada (3): add .mailmap for proper git-shortlog output scripts: add mailmapper, a tool to create/update mailmap file Update .mailmap using scripts/mailmapper .mailmap | 27 +++++++++ scripts/mailmapper | 160 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 187 insertions(+) create mode 100644 .mailmap create mode 100755 scripts/mailmapper -- 1.9.1

2 6