July 2014 - U-Boot

[U-Boot] [PATCH v2 0/9] Introduce driver model serial uclass
by Simon Glass 29 Jul '14

29 Jul '14

This series adds support for a serial uclass, enabling serial drivers to be converted to use driver model. Unfortunately this is quite a complicated process for a number of reasons: - serial is used before relocation, but driver model does not support this - stdio member functions are not passed a device pointer, but driver model requires this (so does serial, but it uses an ugly work-around) - driver model requires malloc() but this is not available before relocation - for sandbox, if something goes wrong with the console, we still need to get an error message out through the fallback console So this series relies on quite a few patches to address the above, as well as the serial uclass and an implementation for sandbox. If you have limited time, please take a look at least at the uclass patch which is 'dm: Add a uclass for serial devices' (see include/serial.h). Note: this series breaks 4 exynos boards. I will figure out how to get them to build as part of the exynos5-dt common board work. To see the current state of driver model, look at u-boot-dm.git branch 'working'. Changes in v2: - Add exynos serial support - Remove RFC status - Rename struct device to struct udevice - Split out core driver model patches into a separate set Simon Glass (9): serial: Set up the 'priv' pointer when creating a serial device dm: Add a uclass for serial devices Set up stdio earlier when using driver model sandbox: Convert serial driver to use driver model sandbox: serial: Support a coloured console sandbox: dts: Add a serial console node dm: exynos: Mark exynos5 console as pre-reloc dm: exynos: Move serial to driver model dm: Make driver model available before board_init() arch/arm/dts/exynos5.dtsi | 1 + arch/sandbox/dts/sandbox.dts | 10 ++ common/board_r.c | 19 +-- common/stdio.c | 18 ++- drivers/serial/Makefile | 4 + drivers/serial/sandbox.c | 140 +++++++++++++++---- drivers/serial/serial-uclass.c | 197 +++++++++++++++++++++++++++ drivers/serial/serial.c | 1 + drivers/serial/serial_s5p.c | 295 +++++++++++++---------------------------- include/configs/exynos5-dt.h | 1 + include/configs/sandbox.h | 3 + include/dm/uclass-id.h | 1 + include/serial.h | 92 +++++++++++++ include/stdio_dev.h | 24 +++- 14 files changed, 566 insertions(+), 240 deletions(-) create mode 100644 drivers/serial/serial-uclass.c -- 2.0.0.526.g5318336

2 14

[U-Boot] Please pull u-boot-ppc4xx/master
by Stefan Roese 28 Jul '14

28 Jul '14

Hi Tom! Please pull the following 2 patches from Dirk: The following changes since commit fbe79a17fddb7f0b11aa15b9c93e9a4a26165ed8: m68k: define __kernel_size_t as unsinged int again (2014-07-22 09:46:50 -0400) are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git for you to fetch changes up to d9f923ffcb60be6817cff37c76e21faede8d2819: board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards (2014-07-25 10:55:49 +0200) ---------------------------------------------------------------- Dirk Eibach (2): ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards arch/powerpc/cpu/ppc4xx/cpu_init.c | 4 ++-- include/configs/controlcenterd.h | 2 ++ include/configs/dlvision-10g.h | 1 + include/configs/dlvision.h | 1 + include/configs/gdppc440etx.h | 1 + include/configs/intip.h | 1 + include/configs/io.h | 1 + include/configs/io64.h | 1 + include/configs/iocon.h | 1 + include/configs/neo.h | 1 + 10 files changed, 12 insertions(+), 2 deletions(-)

2 1

[U-Boot] Please pull u-boot-mpc85xx master
by York Sun 28 Jul '14

28 Jul '14

Tom, The following changes since commit fbe79a17fddb7f0b11aa15b9c93e9a4a26165ed8: m68k: define __kernel_size_t as unsinged int again (2014-07-22 09:46:50 -0400) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master for you to fetch changes up to fb5368789a45ca5ee4396cbbf563a8f16ab24f9c: board/freescale: use generic board architecture for t2080qds and t2080rdb (2014-07-23 12:40:30 -0700) ---------------------------------------------------------------- Lijun Pan (1): powerpc/mpc85xx: Remove P1023 RDS support Prabhakar Kushwaha (3): driver/nand:Define MAX_BANKS same as SoC defined for IFC driver/nand: Update SRAM initialize logic for IFC. driver/nand: Add support of 16K SRAM for IFC 2.0 Rotariu Marian-Cristian (1): net/fm: call fm_port_to_index() with proper checks Sandeep Singh (1): powerpc/mpc85xx: Removed support for G4060 Shaohui Xie (2): powerpc/ifc: fix invalid CSn FTIM2.TCH setting powerpc/t4240qds: fix offset of serdes when checking reference clock Shaveta Leekha (1): powerpc/chassis2: Configure and enable L2 cache for PPC clusters only Shengzhou Liu (4): powerpc/85xx: add fdt_fixup_dma3 board/t2080qds: enable sst and eon spi flash for nor boot powerpc/t1040: update i2c for t1040qds and t104xrdb board/freescale: use generic board architecture for t2080qds and t2080rdb Tang Yuantian (1): mpc85xx/t104x: Enable L2 and CPC cache when resume York Sun (3): driver/ddr: Fix DDR4 driver for ARM powerpc/mpc85xx: Check return value of find_tlb_idx driver/ddr: Fix DDR register timing_cfg_8 Zang Roy-R61911 (1): fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint Zhao Qiang (1): qe: move immap_qe.h from arch directory into common directory vijay rai (1): powerpc/t1040qds: Initialize EPHY2 clock to RGMII only arch/arm/include/asm/arch-fsl-lsch3/config.h | 4 + arch/arm/include/asm/io.h | 1 + arch/powerpc/cpu/mpc83xx/cpu.c | 2 +- arch/powerpc/cpu/mpc83xx/fdt.c | 2 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 166 +++---- arch/powerpc/cpu/mpc85xx/fdt.c | 47 ++ arch/powerpc/cpu/mpc8xxx/cpu.c | 1 - arch/powerpc/include/asm/cache.h | 6 + arch/powerpc/include/asm/immap_85xx.h | 6 + arch/powerpc/include/asm/io.h | 3 + arch/powerpc/include/asm/processor.h | 1 - arch/powerpc/lib/board.c | 5 + board/exmeritus/hww1u1a/hww1u1a.c | 12 +- board/freescale/b4860qds/b4860qds.c | 12 +- board/freescale/bsc9132qds/bsc9132qds.c | 12 +- board/freescale/c29xpcie/c29xpcie.c | 12 +- board/freescale/corenet_ds/corenet_ds.c | 12 +- board/freescale/mpc8536ds/mpc8536ds.c | 12 +- board/freescale/mpc8572ds/mpc8572ds.c | 12 +- board/freescale/p1010rdb/p1010rdb.c | 12 +- board/freescale/p1022ds/p1022ds.c | 12 +- board/freescale/p1023rdb/p1023rdb.c | 12 +- board/freescale/p1023rds/Makefile | 9 - board/freescale/p1023rds/README | 101 ----- board/freescale/p1023rds/bcsr.h | 49 -- board/freescale/p1023rds/law.c | 19 - board/freescale/p1023rds/p1023rds.c | 191 -------- board/freescale/p1023rds/tlb.c | 100 ---- board/freescale/p1_p2_rdb/p1_p2_rdb.c | 12 +- board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 12 +- board/freescale/p1_twr/p1_twr.c | 12 +- board/freescale/p2020ds/p2020ds.c | 12 +- board/freescale/p2041rdb/p2041rdb.c | 12 +- board/freescale/t1040qds/eth.c | 4 +- board/freescale/t1040qds/t1040qds.c | 12 +- board/freescale/t1040qds/t1040qds_qixis.h | 4 + board/freescale/t104xrdb/t104xrdb.c | 12 +- board/freescale/t208xqds/t208xqds.c | 12 +- board/freescale/t208xrdb/t208xrdb.c | 13 +- board/freescale/t4qds/t4240emu.c | 12 +- board/freescale/t4qds/t4240qds.c | 22 +- board/freescale/t4rdb/t4240rdb.c | 12 +- boards.cfg | 1 - drivers/bootcount/bootcount.c | 2 +- drivers/ddr/fsl/ctrl_regs.c | 3 + drivers/ddr/fsl/fsl_ddr_gen4.c | 7 +- drivers/mtd/nand/fsl_ifc_nand.c | 45 +- drivers/mtd/nand/fsl_ifc_spl.c | 6 +- drivers/net/fm/fm.h | 3 +- drivers/net/fm/init.c | 6 + drivers/pci/fsl_pci_init.c | 10 +- drivers/qe/qe.c | 2 +- drivers/qe/uccf.c | 2 +- drivers/qe/uccf.h | 2 +- drivers/qe/uec.c | 2 +- drivers/qe/uec_phy.c | 2 +- include/configs/B4860QDS.h | 2 +- include/configs/BSC9132QDS.h | 2 +- include/configs/C29XPCIE.h | 2 +- include/configs/P1010RDB.h | 2 +- include/configs/P1023RDS.h | 479 -------------------- include/configs/T1040QDS.h | 10 +- include/configs/T104xRDB.h | 12 +- include/configs/T208xQDS.h | 4 +- include/configs/T208xRDB.h | 4 +- include/configs/T4240QDS.h | 2 +- include/fsl_ifc.h | 4 + .../include/asm => include/linux}/immap_qe.h | 0 include/post.h | 2 +- 69 files changed, 481 insertions(+), 1133 deletions(-) delete mode 100644 board/freescale/p1023rds/Makefile delete mode 100644 board/freescale/p1023rds/README delete mode 100644 board/freescale/p1023rds/bcsr.h delete mode 100644 board/freescale/p1023rds/law.c delete mode 100644 board/freescale/p1023rds/p1023rds.c delete mode 100644 board/freescale/p1023rds/tlb.c delete mode 100644 include/configs/P1023RDS.h rename {arch/powerpc/include/asm => include/linux}/immap_qe.h (100%) Thanks, York

2 1

[U-Boot] [PATCH] ARM: DRA: Enable VTT regulator
by Lokesh Vutla 28 Jul '14

28 Jul '14

DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. The pad A22(offset 0x3b4) is used by gpio7_11 on REV G and later boards, and left unused on previous boards, so enabling this gpio for all the boards, as it is unaffected. Signed-off-by: Lokesh Vutla <lokeshvutla(a)ti.com> --- arch/arm/cpu/armv7/omap-common/emif-common.c | 6 ++++++ arch/arm/include/asm/arch-omap5/gpio.h | 12 ++++++++++++ arch/arm/include/asm/arch-omap5/sys_proto.h | 1 + board/ti/dra7xx/evm.c | 21 +++++++++++++++++++++ board/ti/dra7xx/mux_data.h | 1 + 5 files changed, 41 insertions(+) diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 71c0cc8..74ebf41 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1307,6 +1307,10 @@ static void do_bug0039_workaround(u32 base) __raw_writel(clkctrl, (*prcm)->cm_memif_clkstctrl); } +void __weak ddr_regulator_enable(void) +{ +} + /* * SDRAM initialization: * SDRAM initialization has two parts: @@ -1342,6 +1346,8 @@ void sdram_init(void) bypass_dpll((*prcm)->cm_clkmode_dpll_core); else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); + + ddr_regulator_enable(); } if (!in_sdram) diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h index 9dd03c9..bd6c835 100644 --- a/arch/arm/include/asm/arch-omap5/gpio.h +++ b/arch/arm/include/asm/arch-omap5/gpio.h @@ -34,4 +34,16 @@ #define OMAP54XX_GPIO7_BASE 0x48051000 #define OMAP54XX_GPIO8_BASE 0x48053000 +/* GPIO CTRL register */ +#define GPIO_CTRL_DISABLEMODULE_SHIFT 0 +#define GPIO_CTRL_DISABLEMODULE_MASK (1 << 0) +#define GPIO_CTRL_ENABLEMODULE GPIO_CTRL_DISABLEMODULE_MASK + +/* GPIO OUTPUT ENABLE register */ +#define GPIO_OE_ENABLE(x) (1 << x) + +/* GPIO SETDATAOUT register */ +#define GPIO_SETDATAOUT(x) (1 << x) +#define GPIO_DATAOUT(x) (1 << x) + #endif /* _GPIO_OMAP5_H */ diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 1038303..4aceb6e 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -56,6 +56,7 @@ void force_emif_self_refresh(void); void get_ioregs(const struct ctrl_ioregs **regs); void srcomp_enable(void); void setup_warmreset_time(void); +void ddr_regulator_enable(void); static inline u32 div_round_up(u32 num, u32 den) { diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 7f19655..ededa1f 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -16,6 +16,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sata.h> +#include <asm/arch/gpio.h> #include <environment.h> #include "mux_data.h" @@ -267,3 +268,23 @@ int board_eth_init(bd_t *bis) return ret; } #endif + +/* VTT regulator enable */ +void ddr_regulator_enable(void) +{ + u32 temp; + + /* Do not enable VTT for DRA722 */ + if (omap_revision() == DRA722_ES1_0) + return; + + /* enable module */ + writel(GPIO_CTRL_ENABLEMODULE, OMAP54XX_GPIO7_BASE + OMAP_GPIO_CTRL); + + /*enable output for GPIO7_11*/ + writel(GPIO_SETDATAOUT(11), OMAP54XX_GPIO7_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(OMAP54XX_GPIO7_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(11)); + writel(temp, OMAP54XX_GPIO7_BASE + OMAP_GPIO_OE); + writel(GPIO_DATAOUT(11), OMAP54XX_GPIO7_BASE + OMAP_GPIO_DATAOUT); +} diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index c9e202a..bc17936 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -67,5 +67,6 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */ {GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/ {USB2_DRVVBUS, (M0 | IEN | FSC) }, + {SPI1_CS1, (PEN | IDIS | M14) }, }; #endif /* _MUX_DATA_DRA7XX_H_ */ -- 1.9.1

3 2

[U-Boot] Refactoring of U-Boot directory structure
by Masahiro Yamada 28 Jul '14

28 Jul '14

Hi. In U-Boot, the directory structure under arch/ is like this arch/${ARCH}/cpu/${CPU}/${SOC} Exception: - ${CPU} is missing for some architectures such as blackfin, sandbox, etc. - There are many boards without ${SOC} My question is, ${SOC} should always depend on ${CPU} ? I think it is reasonable to migrate to the structure like this: arch/${ARCH}/cpu/${CPU} /mach-${foo} /mach-${bar} I think arch/${ARCH}/cpu/${CPU}/${SOC} structure have given us a lot of pain. The problems I want to solve are: [1] Do not split the similar SoC family to various directories at91 SoC directory exists under arm920t, arm926ejs, armv7 directory. ./arch/arm/cpu/arm920t/at91 ./arch/arm/cpu/arm926ejs/at91 ./arch/arm/cpu/armv7/at91 It looks reasonable to collect at91 sources into a single place, arch/arm/mach-at91 [2] Collect C/ASM sources and headers into a single place Now SoC-specific sources are under ./arch/${ARCH}/cpu/${CPU}/${SOC}/ But headers are ./arch/${ARCH}/include/asm/arch-${SOC}/ In the new structure, ./arch/arm/mach-${SOC}/ : C/ASM files ./arch/arm/mach-${SOC}/include/ : Header files [3] Do not create a symbolic link to header dicrectory mkconfig creates a symbolic link to arch/asm/include/asm/arch-${SOC} I dislike creating a symbolic link by configuration and remove it by mrproper. Linux Kernel did that long time ago, but they did away with it. [4] Stop Tegra Tegra uses different CPU for SPL and Normal U-boot. That's why Tegra directories are sprinkled under arch/arm/: arch/arm/cpu/arm720t/tegra-common/ arch/arm/cpu/arm720t/tegra20/ arch/arm/cpu/arm720t/tegra30/ arch/arm/cpu/arm720t/tegra114/ arch/arm/cpu/arm720t/tegra124/ arch/arm/cpu/armv7/tegra-common/ arch/arm/cpu/armv7/tegra20/ arch/arm/cpu/armv7/tegra30/ arch/arm/cpu/armv7/tegra114/ arch/arm/cpu/armv7/tegra124/ arch/arm/include/asm/arch-tegra/ arch/asm/include/asm/arch-tegra20/ arch/asm/include/asm/arch-tegra30/ arch/asm/include/asm/arch-tegra114/ arch/asm/include/asm/arch-tegra124/ They can be refactored arch/arm/mach-tegra/ : tegra common part arch/arm/mach-tegra/tegra20/ : tegra20-specific arch/arm/mach-tegra/tegra30/ : tegra30-specific arch/arm/mach-tegra/tegra114/ : tegra114-specific arch/arm/mach-tegra/tegra124/ : tegra124-specific or maybe arch/arm/plat-tegra/ : tegra common part arch/arm/mach-tegra20/ : tegra20-specific arch/arm/mach-tegra30/ : tegra30-specific arch/arm/mach-tegra114/ : tegra114-specific arch/arm/mach-tegra124/ : tegra124-specific Your comments are welcome! Best Regards Masahiro Yamada

5 8

[U-Boot] Please pull u-boot-x86.git branch patman
by Simon Glass 28 Jul '14

28 Jul '14

Hi Tom, I think a few of these are ready to go in. The following changes since commit 772e173802627a1917a3f5878ad4b9b920089a33: Merge branch 'master' of git://git.denx.de/u-boot-sh (2014-07-25 15:05:09 -0400) are available in the git repository at: http://git.denx.de/u-boot-x86.git for you to fetch changes up to ee860c60d2c5283c009f7ea740c6ee706da87cb7: patman: make "No recipient" checking more tolerant (2014-07-28 04:57:24 +0100) ---------------------------------------------------------------- Masahiro Yamada (1): patman: make "No recipient" checking more tolerant Simon Glass (2): buildman: Add -C option to force a reconfigure for each commit buildman: Support in-tree builds tools/buildman/builder.py | 24 +++++++++++++++++++++--- tools/buildman/buildman.py | 6 ++++++ tools/buildman/control.py | 2 ++ tools/patman/gitutil.py | 11 ++++++++--- 4 files changed, 37 insertions(+), 6 deletions(-) Regards, Simon

2 1

[U-Boot] [PATCH] usb: ehci: rmobile: Remove xHCI address
by Nobuhiro Iwamatsu 28 Jul '14

28 Jul '14

echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj(a)renesas.com> --- drivers/usb/host/ehci-rmobile.c | 3 --- include/configs/koelsch.h | 2 +- include/configs/lager.h | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c index 29b4a93..0d1a726 100644 --- a/drivers/usb/host/ehci-rmobile.c +++ b/drivers/usb/host/ehci-rmobile.c @@ -21,19 +21,16 @@ static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0A0000, /* USB1 */ 0xEE0C0000, /* USB2 */ - 0xEE000000 /* USB3 (USB3.0 Host)*/ }; #elif defined(CONFIG_R8A7791) static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0C0000, /* USB1 */ - 0xEE000000 /* USB3 (USB3.0 Host)*/ }; #elif defined(CONFIG_R8A7794) static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0C0000, /* USB1 */ - /* R8A7794 does not have USB 3.0. */ }; #else #error rmobile EHCI USB driver not supported on this platform diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 6795f28..3c2b613 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -171,7 +171,7 @@ /* USB */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE #endif /* __KOELSCH_H */ diff --git a/include/configs/lager.h b/include/configs/lager.h index f39a788..74c998f 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -175,7 +175,7 @@ /* USB */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 4 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE #endif /* __LAGER_H */ -- 2.0.0

2 1

[U-Boot] Pull request: u-boot-sh/rmobile into u-boot-arm/master
by Nobuhiro Iwamatsu 28 Jul '14

28 Jul '14

Dear Albert Aribaud, Please pull u-boot-sh/rmobile into u-boot-arm/master. The following changes since commit 23f23f23d509e8e873797884456070c8a47d72b2: socfpga: Relocate arch common functions away from board (2014-07-05 10:14:46 +0200) are available in the git repository at: git://git.denx.de/u-boot-sh.git rmobile for you to fetch changes up to cff2f5f09ee8ab45b86eed7228bacbce6eca9f01: arm: rmobile: Add support Alt board (2014-07-24 14:03:46 +0900) ---------------------------------------------------------------- Nobuhiro Iwamatsu (4): net: sh-eth: Add support R8A7794 serial: sh: Add support R8A7794 arm: rmobile: Add support R8A7794 arm: rmobile: Add support Alt board arch/arm/cpu/armv7/rmobile/Makefile | 1 + arch/arm/cpu/armv7/rmobile/cpu_info.c | 1 + arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c | 1513 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-rmobile/gpio.h | 3 + arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h | 176 ++++++++++++++++ arch/arm/include/asm/arch-rmobile/r8a7794.h | 14 ++ arch/arm/include/asm/arch-rmobile/rcar-base.h | 4 +- arch/arm/include/asm/arch-rmobile/rmobile.h | 2 + board/renesas/alt/Makefile | 9 + board/renesas/alt/alt.c | 173 +++++++++++++++ board/renesas/alt/qos.c | 944 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ board/renesas/alt/qos.h | 12 ++ boards.cfg | 1 + drivers/net/sh_eth.c | 5 +- drivers/net/sh_eth.h | 6 +- drivers/serial/serial_sh.h | 3 +- include/configs/alt.h | 166 +++++++++++++++ 17 files changed, 3026 insertions(+), 7 deletions(-) create mode 100644 arch/arm/cpu/armv7/rmobile/pfc-r8a7794.c create mode 100644 arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h create mode 100644 arch/arm/include/asm/arch-rmobile/r8a7794.h create mode 100644 board/renesas/alt/Makefile create mode 100644 board/renesas/alt/alt.c create mode 100644 board/renesas/alt/qos.c create mode 100644 board/renesas/alt/qos.h create mode 100644 include/configs/alt.h -- Nobuhiro Iwamatsu iwamatsu at {nigauri.org / debian.org} GPG ID: 40AD1FA6

2 1

[U-Boot] Please pull u-boot-sunxi.git/master
by Ian Campbell 28 Jul '14

28 Jul '14

Hi Albert, Welcome back! The following changes since commit 23f23f23d509e8e873797884456070c8a47d72b2: socfpga: Relocate arch common functions away from board (2014-07-05 10:14:46 +0200) are available in the git repository at: git://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to 7c48b015100eeff0e1bbb766394f7beca23afb48: sunxi: use setbits_le32 to enable the DMA clock (2014-07-18 19:42:25 +0100) ---------------------------------------------------------------- Chen-Yu Tsai (1): sunxi: Add support for using MII phy-s with the GMAC nic Hans de Goede (12): sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple of 4 sunxi: Fix u-boot-spl.lds to refer to .vectors sunxi: Remove mmc DMA support sunxi: Implement reset_cpu sunxi: Add sun4i support sunxi: Add sun5i support sunxi: Add emac glue, enable emac on the cubieboard sunxi: Add Ian Campbell and Hans de Goede as cubietruck board-maintainers mvtwsi: convert to CONFIG_SYS_I2C framework sunxi: Add i2c support sunxi: Add axp152 pmic support sunxi: Fix reset hang on sun5i Henrik Nordstrom (1): sunxi: Add axp209 pmic support Ian Campbell (4): sunxi: Avoid unused variable warning. sunxi: add Cubieboard2 support sunxi: add gpio driver sunxi: use setbits_le32 to enable the DMA clock Jonathan Liu (1): sunxi: use random parts of SID to set ethaddr Stefan Roese (1): net: Rename and cleanup sunxi (Allwinner) emac driver arch/arm/cpu/armv7/sunxi/Makefile | 4 + arch/arm/cpu/armv7/sunxi/board.c | 41 ++++++- arch/arm/cpu/armv7/sunxi/clock_sun4i.c | 3 +- arch/arm/cpu/armv7/sunxi/cpu_info.c | 15 +++ arch/arm/cpu/armv7/sunxi/dram.c | 102 ++++++++++++++++- arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds | 5 + arch/arm/cpu/armv7/sunxi/u-boot-spl.lds | 6 + arch/arm/include/asm/arch-kirkwood/config.h | 3 +- arch/arm/include/asm/arch-sunxi/gpio.h | 2 + arch/arm/include/asm/arch-sunxi/i2c.h | 15 +++ arch/arm/include/asm/arch-sunxi/timer.h | 5 + board/sunxi/Makefile | 4 + board/sunxi/board.c | 67 +++++++++++ board/sunxi/dram_a13_oli_micro.c | 32 ++++++ board/sunxi/dram_cubieboard.c | 31 ++++++ board/sunxi/dram_cubieboard2.c | 31 ++++++ board/sunxi/dram_r7dongle.c | 31 ++++++ board/sunxi/gmac.c | 11 ++ boards.cfg | 9 +- drivers/gpio/Makefile | 1 + drivers/gpio/sunxi_gpio.c | 102 +++++++++++++++++ drivers/i2c/Makefile | 2 +- drivers/i2c/mvtwsi.c | 88 ++++++++------- drivers/mmc/sunxi_mmc.c | 141 ++--------------------- drivers/net/Makefile | 2 +- drivers/net/{sunxi_wemac.c => sunxi_emac.c} | 140 +++++++++++------------ drivers/power/Makefile | 2 + drivers/power/axp152.c | 97 ++++++++++++++++ drivers/power/axp209.c | 167 ++++++++++++++++++++++++++++ include/axp152.h | 10 ++ include/axp209.h | 14 +++ include/configs/edminiv2.h | 3 +- include/configs/sun4i.h | 24 ++++ include/configs/sun5i.h | 24 ++++ include/configs/sun7i.h | 1 + include/configs/sunxi-common.h | 27 ++++- include/netdev.h | 2 +- tools/mksunxiboot.c | 10 +- 38 files changed, 1010 insertions(+), 264 deletions(-) create mode 100644 arch/arm/include/asm/arch-sunxi/i2c.h create mode 100644 board/sunxi/dram_a13_oli_micro.c create mode 100644 board/sunxi/dram_cubieboard.c create mode 100644 board/sunxi/dram_cubieboard2.c create mode 100644 board/sunxi/dram_r7dongle.c create mode 100644 drivers/gpio/sunxi_gpio.c rename drivers/net/{sunxi_wemac.c => sunxi_emac.c} (78%) create mode 100644 drivers/power/axp152.c create mode 100644 drivers/power/axp209.c create mode 100644 include/axp152.h create mode 100644 include/axp209.h create mode 100644 include/configs/sun4i.h create mode 100644 include/configs/sun5i.h

3 3

[U-Boot] [PATCH] powerpc/85xx: enable mtdparts for nor flash
by Yangbo Lu 28 Jul '14

28 Jul '14

Enable mtdparts for nor flash of some P1/P2 boards that include p1020rdb-pd, p1021rdb-pc, p1022ds, p1025twr, and p2020rdb-pc. Signed-off-by: Xie Xiaobo <X.Xie(a)freescale.com> Signed-off-by: Yangbo Lu <yangbo.lu(a)freescale.com> Cc: Scott Wood <scottwood(a)freescale.com> --- include/configs/P1022DS.h | 11 +++++++++++ include/configs/p1_p2_rdb_pc.h | 30 ++++++++++++++++++++++++++++++ include/configs/p1_twr.h | 11 +++++++++++ 3 files changed, 52 insertions(+) diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 139d4fe..6f5c19c 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -620,6 +620,17 @@ #endif /* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=e8000000.nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" + +/* * Environment */ #ifdef CONFIG_SPIFLASH diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 07b6179..ec7d105 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -77,6 +77,16 @@ #define __SW_BOOT_NAND 0x44 #define __SW_BOOT_PCIE 0x74 #define CONFIG_SYS_L2_SIZE (256 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ec000000.nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=ec000000.nor:128k(dtb),6016k(kernel),57088k(fs),1m(vsc7385-firmware),1280k(u-boot)" #endif #if defined(CONFIG_P1021RDB) @@ -95,6 +105,16 @@ #define __SW_BOOT_NAND 0xec #define __SW_BOOT_PCIE 0x6c #define CONFIG_SYS_L2_SIZE (256 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ef000000.nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=ef000000.nor:256k(vsc7385-firmware),256k(dtb),4608k(kernel),9728k(fs),256k(qe-ucode-firmware),1280k(u-boot)" #endif #if defined(CONFIG_P1024RDB) @@ -142,6 +162,16 @@ #define __SW_BOOT_NAND 0xe8 #define __SW_BOOT_PCIE 0xa8 #define CONFIG_SYS_L2_SIZE (512 << 10) +/* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ef000000.nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=ef000000.nor:256k(vsc7385-firmware),256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)" #endif #ifdef CONFIG_SDCARD diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index c296a07..f34ea33 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -389,6 +389,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_TWR-P1025 */ /* + * Dynamic MTD Partition support with mtdparts + */ +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=ec000000.nor" +#define MTDPARTS_DEFAULT \ + "mtdparts=ec000000.nor:256k(vsc7385-firmware),256k(dtb),5632k(kernel),57856k(fs),256k(qe-ucode-firmware),1280k(u-boot)" + +/* * Environment */ #ifdef CONFIG_SYS_RAMBOOT -- 1.8.5

2 1