April 2014 - U-Boot

[U-Boot] [PATCH v2 1/2] lsxl: use 64bit for LBA48 to support 4 TB drives
by Michael Walle 25 May '14

25 May '14

Cc: Prafulla Wadaskar <prafulla(a)marvell.com> Signed-off-by: Michael Walle <michael(a)walle.cc> --- Changes v2: - none --- include/configs/lsxl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 2ae8a27..4ad5eb8 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -160,6 +160,7 @@ #undef CONFIG_SYS_IDE_MAXDEVICE #define CONFIG_SYS_IDE_MAXDEVICE 1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_64BIT_LBA #endif #endif /* _CONFIG_LSXL_H */ -- 1.7.10.4

2 6

[U-Boot] [PATCH 1/3] tools: mxsboot: Staticize functions
by Marek Vasut 24 May '14

24 May '14

Make remaining non-static functions static and the same for vars. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Fabio Estevam <fabio.estevam(a)freescale.com> Cc: Stefano Babic <sbabic(a)denx.de> --- tools/mxsboot.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/mxsboot.c b/tools/mxsboot.c index 3d9cc10..1060cbf 100644 --- a/tools/mxsboot.c +++ b/tools/mxsboot.c @@ -28,14 +28,14 @@ * * TWEAK this if you have different kind of NAND chip. */ -uint32_t nand_writesize = 2048; -uint32_t nand_oobsize = 64; -uint32_t nand_erasesize = 128 * 1024; +static uint32_t nand_writesize = 2048; +static uint32_t nand_oobsize = 64; +static uint32_t nand_erasesize = 128 * 1024; /* * Sector on which the SigmaTel boot partition (0x53) starts. */ -uint32_t sd_sector = 2048; +static uint32_t sd_sector = 2048; /* * Each of the U-Boot bootstreams is at maximum 1MB big. @@ -434,7 +434,7 @@ static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd, return 0; } -void usage(void) +static void usage(void) { printf( "Usage: mxsboot [ops] <type> <infile> <outfile>\n" @@ -575,7 +575,7 @@ err0: return ret; } -int parse_ops(int argc, char **argv) +static int parse_ops(int argc, char **argv) { int i; int tmp; -- 1.7.10.4

4 11

[U-Boot] [PATCH] compulab: eeprom: enable any i2c driver
by Ilya Ledvich 24 May '14

24 May '14

Make the common eeprom library available for any I2C driver. Signed-off-by: Ilya Ledvich <ilya(a)compulab.co.il> --- board/compulab/common/Makefile | 2 +- board/compulab/common/eeprom.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile index 6d7d068..4044ac9 100644 --- a/board/compulab/common/Makefile +++ b/board/compulab/common/Makefile @@ -6,5 +6,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o +obj-$(CONFIG_SYS_I2C) += eeprom.o obj-$(CONFIG_LCD) += omap3_display.o diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h index e871629..85d5bf0 100644 --- a/board/compulab/common/eeprom.h +++ b/board/compulab/common/eeprom.h @@ -10,7 +10,7 @@ #ifndef _EEPROM_ #define _EEPROM_ -#ifdef CONFIG_SYS_I2C_OMAP34XX +#ifdef CONFIG_SYS_I2C int cl_eeprom_read_mac_addr(uchar *buf); u32 cl_eeprom_get_board_rev(void); #else -- 1.7.9.5

3 5

[U-Boot] [PATCH 0/8] omap3: overo: update board data
by Ash Charles 24 May '14

24 May '14

This patch series collects board-specific fixes and updates for the Gumstix Overo COMs. Ash Charles (7): omap: overo: allow the use of a plain text env file instead boot scripts OMAP3: overo: add command support for mtd and ubi OMAP3: overo: eliminate hard-coded partition offsets arm: omap3: Fix omap3_overo SPL boot hangup [omap3][overo] Add Board Revision for Wireless chip OMAP3: overo: add some Gumstix expansion boards [omap3][overo] Allow overo to boot with device tree Peter A. Bigot (1): OMAP3: overo: increase linux partition to 8 MiB board/overo/overo.c | 43 ++++++++++++++++- board/overo/overo.h | 17 +++++++ include/configs/omap3_overo.h | 109 ++++++++++++++++++++++++++++++++---------- 3 files changed, 142 insertions(+), 27 deletions(-) -- 1.8.3.2

3 34

[U-Boot] [PATCH 0/4] ARM: OMAP5: add cm-t54 board support
by Dmitry Lifshitz 24 May '14

24 May '14

Add support for CompuLab cm-t54 CoM, based on OMAP5432 CPU. http://compulab.co.il/products/computer-on-modules/cm-t54/ Basic support includes: * Boot from MMC/SD and eMMC * USB * LAN Dmitry Lifshitz (4): ARM: OMAP5: add UART4 support ARM: OMAP5: Power: add LDO2 support for Palmas driver ARM: OMAP5: add CKO buffer control mask cm-t54: add cm-t54 board support arch/arm/include/asm/arch-omap5/clock.h | 3 + arch/arm/include/asm/arch-omap5/omap.h | 1 + board/compulab/cm_t54/Makefile | 10 ++ board/compulab/cm_t54/cm_t54.c | 177 +++++++++++++++++++++++++++++++ board/compulab/cm_t54/mux.c | 94 ++++++++++++++++ board/compulab/cm_t54/spl.c | 66 ++++++++++++ boards.cfg | 1 + include/configs/cm_t54.h | 144 +++++++++++++++++++++++++ include/palmas.h | 4 + 9 files changed, 500 insertions(+), 0 deletions(-) create mode 100644 board/compulab/cm_t54/Makefile create mode 100644 board/compulab/cm_t54/cm_t54.c create mode 100644 board/compulab/cm_t54/mux.c create mode 100644 board/compulab/cm_t54/spl.c create mode 100644 include/configs/cm_t54.h -- 1.7.5.4

3 11

[U-Boot] [PATCH v3] arm: Add support for semihosting for armv8 fastmodel targets.
by Darwin Rambo 23 May '14

23 May '14

The reason for this change is to be able to use the ARM Trusted Firmware (ATF) to load the various ATF images, plus u-boot, which can then load the kernel/ramdisk/dtb with calls to an external host from a standard fastmodel armv8 board file using semihosting, and then launch the kernel without a bootwrapper. This gives us a more realistic boot sequence. There are two main ARM virtual Fixed Virtual Platform (FVP) models, Versatile Express (VE) FVP and BASE FVP (See http://www.arm.com/products/tools/models/fast-models/foundation-model.php) The initial vexpress64 u-boot board created here runs on the VE virtual platform using the license-free Foundation_v8 simulator. Fortunately, the Foundation_v8 simulator also supports the BASE_FVP model which companies can purchase licenses for and contain much more functionality. So we can, in u-boot, run either model by either using the VE FVP (default), or turning on CONFIG_BASE_FVP for the more full featured model. Rather than create a new armv8 board similar to armltd/vexpress64, add semihosting calls to the existing one, enabled with CONFIG_SEMIHOSTING and CONFIG_BASE_FVP both set. Also reuse the existing board config file vexpress_aemv8a.h but differentiate the two models by the presence or absence of CONFIG_BASE_FVP. This change is tested and works on both the Foundation and Base fastmodel simulators. Support for armv7 in fastmodel is less useful due to the wide range of available silicon and the lack of a free armv7 fastmodel, so this change contains an untested armv7 placeholder for the service trap opcode. The level of semihosting support is minimal, restricted to just what it takes to load images to memory. If more semihosting functionality is required, such as file seek, outputting strings, reading characters, etc, then it can be easily added later. Signed-off-by: Darwin Rambo <drambo(a)broadcom.com> --- Changes in v3: - minor format fixup in board file Changes in v2: - use kernel_addr_r, fdt_addr_r, initrd_addr_r convention. - Use env variables for kernel/fdt/initrd file names. - Add CONFIG_BASE_FVP to differentiate VE and BASE FVP models. - CONFIG_SEMIHOSTING only refers to bringing in semihosting code now. - Remove unnecessary CONFIG_SYS_BAUDRATE_TABLE, CONFIG_SYS_PROMPT_HUSH_PS2 - Remove vexpress_aemv8a_semi.h and replace with CONFIG_BASE_FVP - Update boards.cfg with option SEMIHOSTING and BASE_FVP - Add doc/README.semihosting Changes in v1: - Initial code - Remove empty timer_init() function. arch/arm/include/asm/semihosting.h | 21 +++ arch/arm/lib/Makefile | 1 + arch/arm/lib/semihosting.c | 235 ++++++++++++++++++++++++++++++++++ board/armltd/vexpress64/vexpress64.c | 101 ++++++++++++++- boards.cfg | 1 + doc/README.semihosting | 35 +++++ include/configs/vexpress_aemv8a.h | 59 ++++++++- 7 files changed, 441 insertions(+), 12 deletions(-) create mode 100644 arch/arm/include/asm/semihosting.h create mode 100644 arch/arm/lib/semihosting.c create mode 100644 doc/README.semihosting diff --git a/arch/arm/include/asm/semihosting.h b/arch/arm/include/asm/semihosting.h new file mode 100644 index 0000000..74111dc --- /dev/null +++ b/arch/arm/include/asm/semihosting.h @@ -0,0 +1,21 @@ +/* + * Copyright 2014 Broadcom Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SEMIHOSTING_H__ +#define __SEMIHOSTING_H__ + +/* + * ARM semihosting functions for loading images to memory. See the source + * code for more information. + */ +int smh_load(const char *fname, void *memp, int avail, int verbose); +int smh_read(int fd, void *memp, int len); +int smh_open(const char *fname, char *modestr); +int smh_close(int fd); +int smh_len_fd(int fd); +int smh_len(const char *fname); + +#endif /* __SEMIHOSTING_H__ */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 9fc81cd..0ba929d 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o else obj-$(CONFIG_SPL_FRAMEWORK) += spl.o endif +obj-$(CONFIG_SEMIHOSTING) += semihosting.o obj-y += sections.o ifdef CONFIG_ARM64 diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c new file mode 100644 index 0000000..d603789 --- /dev/null +++ b/arch/arm/lib/semihosting.c @@ -0,0 +1,235 @@ +/* + * Copyright 2014 Broadcom Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Minimal semihosting implementation for reading files into memory. If more + * features like writing files or console output are required they can be + * added later. This code has been tested on arm64/aarch64 fastmodel only. + * An untested placeholder exists for armv7 architectures, but since they + * are commonly available in silicon now, fastmodel usage makes less sense + * for them. + */ +#include <common.h> +#include <asm/semihosting.h> + +#define SYSOPEN 0x01 +#define SYSCLOSE 0x02 +#define SYSREAD 0x06 +#define SYSFLEN 0x0C + +#define MODE_READ 0x0 +#define MODE_READBIN 0x1 + +/* + * Call the handler + */ +static int smh_trap(unsigned int sysnum, void *addr) +{ + register int result asm("r0"); +#if defined(CONFIG_ARM64) + asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr)); +#else + /* Note - untested placeholder */ + asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr)); +#endif + return result; +} + +/* + * Open, load a file into memory, and close it. Check that the available space + * is sufficient to store the entire file. Return the bytes actually read from + * the file as seen by the read function. The verbose flag enables some extra + * printing of successful read status. + */ +int smh_load(const char *fname, void *memp, int avail, int verbose) +{ + int ret, fd, len; + + ret = -1; + + debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname, + avail, memp); + + /* Open the file */ + fd = smh_open(fname, "rb"); + if (fd == -1) + return ret; + + /* Get the file length */ + ret = smh_len_fd(fd); + if (ret == -1) { + smh_close(fd); + return ret; + } + + /* Check that the file will fit in the supplied buffer */ + if (ret > avail) { + printf("%s: ERROR ret %d, avail %u\n", __func__, ret, + avail); + smh_close(fd); + return ret; + } + + len = ret; + + /* Read the file into the buffer */ + ret = smh_read(fd, memp, len); + if (ret == 0) { + /* Print successful load information if requested */ + if (verbose) { + printf("\n%s\n", fname); + printf(" 0x%8p dest\n", memp); + printf(" 0x%08x size\n", len); + printf(" 0x%08x avail\n", avail); + } + } + + /* Close the file */ + smh_close(fd); + + return ret; +} + +/* + * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure + */ +int smh_read(int fd, void *memp, int len) +{ + int ret; + struct smh_read_s { + int fd; + void *memp; + int len; + } read; + + debug("%s: fd %d, memp %p, len %d\n", __func__, fd, memp, len); + + read.fd = fd; + read.memp = memp; + read.len = len; + + ret = smh_trap(SYSREAD, &read); + if (ret == 0) { + return 0; + } else { + /* + * The ARM handler allows for returning partial lengths, + * but if this ever happens, it is a bug in the fastmodel + * implementation. The Linux fastmodel doesn't show this + * issue, and any Windows fastmodel bugs need to be fixed. + * So rather than create ugly unmaintainable partial read + * loops and such, just fail with an error message. + */ + printf("%s: ERROR ret %d, fd %d, len %u memp %p\n", + __func__, ret, fd, len, memp); + } + return ret; +} + +/* + * Open a file on the host. Mode is "r" or "rb" currently. Returns a file + * descriptor or -1 on error. + */ +int smh_open(const char *fname, char *modestr) +{ + int ret, fd, mode; + struct smh_open_s { + const char *fname; + unsigned int mode; + unsigned int len; + } open; + + debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr); + + ret = -1; + + /* Check the file mode */ + if (!(strcmp(modestr, "r"))) { + mode = MODE_READ; + } else if (!(strcmp(modestr, "rb"))) { + mode = MODE_READBIN; + } else { + printf("%s: ERROR mode \'%s\' not supported\n", __func__, + modestr); + return ret; + } + + open.fname = fname; + open.len = strlen(fname); + open.mode = mode; + + /* Open the file on the host */ + fd = smh_trap(SYSOPEN, &open); + if (fd == -1) + printf("%s: ERROR fd %d for file \'%s\'\n", __func__, fd, + fname); + + return fd; +} + +/* + * Close the file using the file descriptor + */ +int smh_close(int fd) +{ + int ret; + long fdlong; + + debug("%s: fd %d\n", __func__, fd); + + fdlong = (long)fd; + ret = smh_trap(SYSCLOSE, &fdlong); + if (ret == -1) + printf("%s: ERROR fd %d\n", __func__, fd); + + return ret; +} + +/* + * Get the file length from the file descriptor + */ +int smh_len_fd(int fd) +{ + int ret; + long fdlong; + + debug("%s: fd %d\n", __func__, fd); + + fdlong = (long)fd; + ret = smh_trap(SYSFLEN, &fdlong); + if (ret == -1) + printf("%s: ERROR ret %d\n", __func__, ret); + + return ret; +} + +/* + * Get the file length from the filename + */ +int smh_len(const char *fname) +{ + int ret, fd, len; + + debug("%s: file \'%s\'\n", __func__, fname); + + /* Open the file */ + fd = smh_open(fname, "rb"); + if (fd == -1) + return fd; + + /* Get the file length */ + len = smh_len_fd(fd); + + /* Close the file */ + ret = smh_close(fd); + if (ret == -1) + return ret; + + debug("%s: returning len %d\n", __func__, len); + + /* Return the file length (or -1 error indication) */ + return len; +} diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 2ec3bc9..5897318 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -11,6 +11,7 @@ #include <netdev.h> #include <asm/io.h> #include <linux/compiler.h> +#include <asm/semihosting.h> DECLARE_GLOBAL_DATA_PTR; @@ -31,11 +32,6 @@ int dram_init(void) return 0; } -int timer_init(void) -{ - return 0; -} - /* * Board specific reset that is system reset. */ @@ -43,6 +39,101 @@ void reset_cpu(ulong addr) { } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_SEMIHOSTING + /* + * Please refer to doc/README.semihosting for a more complete + * description. + * + * We require that the board include file defines these env variables: + * - kernel_name + * - kernel_addr_r + * - initrd_name + * - initrd_addr_r + * - fdt_name + * - fdt_addr_r + * + * For the "fdt chosen" startup macro, this code will then define: + * - initrd_end (based on initrd_addr_r plus actual initrd_size) + * + * We will then load the kernel, initrd, and fdt into the specified + * locations in memory in a similar way that the ATF fastmodel code + * uses semihosting calls to load other boot stages and u-boot itself. + */ + + /* Env variable strings */ + char *kernel_name = getenv("kernel_name"); + char *kernel_addr_str = getenv("kernel_addr_r"); + char *initrd_name = getenv("initrd_name"); + char *initrd_addr_str = getenv("initrd_addr_r"); + char *fdt_name = getenv("fdt_name"); + char *fdt_addr_str = getenv("fdt_addr_r"); + char initrd_end_str[64]; + + /* Actual addresses converted from env variables */ + void *kernel_addr_r; + void *initrd_addr_r; + void *fdt_addr_r; + + /* Actual initrd base and size */ + unsigned long initrd_base; + unsigned long initrd_size; + + /* Space available */ + int avail; + + /* Make sure the environment variables needed are set */ + if (!(kernel_addr_str && initrd_addr_str && fdt_addr_str)) { + printf("%s: Define {kernel/initrd/fdt}_addr_r\n", __func__); + return -1; + } + if (!(kernel_name && initrd_name && fdt_name)) { + printf("%s: Define {kernel/initrd/fdt}_name\n", __func__); + return -1; + } + + /* Get exact initrd_size */ + initrd_size = smh_len(initrd_name); + if (initrd_size == -1) { + printf("%s: Can't get file size for \'%s\'\n", __func__, + initrd_name); + return -1; + } + + /* Set initrd_end */ + initrd_base = simple_strtoul(initrd_addr_str, NULL, 16); + initrd_addr_r = (void *)initrd_base; + sprintf(initrd_end_str, "0x%lx", initrd_base + initrd_size - 1); + setenv("initrd_end", initrd_end_str); + + /* Load kernel to memory */ + fdt_addr_r = (void *)simple_strtoul(fdt_addr_str, NULL, 16); + kernel_addr_r = (void *)simple_strtoul(kernel_addr_str, NULL, 16); + + /* + * The kernel must be lower in memory than fdt and loading the + * kernel must not trample the fdt or vice versa. + */ + avail = fdt_addr_r - kernel_addr_r; + if (avail < 0) { + printf("%s: fdt must be after kernel\n", __func__); + return -1; + } + smh_load(kernel_name, kernel_addr_r, avail, 1); + + /* Load fdt to memory */ + smh_load(fdt_name, fdt_addr_r, 0x20000, 1); + + /* Load initrd to memory */ + smh_load(initrd_name, initrd_addr_r, initrd_size, 1); + +#endif /* CONFIG_SEMIHOSTING */ + return 0; +} +#endif /* CONFIG_BOARD_LATE_INIT */ + /* * Board specific ethernet initialization routine. */ diff --git a/boards.cfg b/boards.cfg index 69c8936..d142b10 100644 --- a/boards.cfg +++ b/boards.cfg @@ -44,6 +44,7 @@ ########################################################################################################### Active aarch64 armv8 - armltd vexpress64 vexpress_aemv8a vexpress_aemv8a:ARM64 David Feng <fenghua(a)phytium.com.cn> +Active aarch64 armv8 - armltd vexpress64 vexpress_aemv8a_semi vexpress_aemv8a:ARM64,SEMIHOSTING,BASE_FVP Darwin Rambo <drambo(a)broadcom.com> Active arc arc700 - synopsys - axs101 - Alexey Brodkin <abrodkin(a)synopsys.com> Active arc arc700 - synopsys <none> arcangel4 - Alexey Brodkin <abrodkin(a)synopsys.com> Active arc arc700 - synopsys <none> arcangel4-be - Alexey Brodkin <abrodkin(a)synopsys.com> diff --git a/doc/README.semihosting b/doc/README.semihosting new file mode 100644 index 0000000..c999a27 --- /dev/null +++ b/doc/README.semihosting @@ -0,0 +1,35 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +Semihosting is ARM's way of having a real or virtual target communicate +with a host or host debugger for basic operations such as file I/O, +console I/O, etc. Please see +http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0471c/Bgbjjgij.html for more information. + +For developing on armv8 virtual fastmodel platforms, semihosting is a +valuable tool since it allows access to image/configuration files before +eMMC or other NV media are available. + +For reference, the current example is enabled by setting CONFIG_SEMIHOSTING +for the "vexpress_aemv8a" board. + +We require that the board include file define these env variables: +- kernel_name e.g. "uImage" +- kernel_addr_r e.g. "0x80000000" +- initrd_name e.g. "ramdisk.img" +- initrd_addr_r e.g. "0x88000000" +- fdt_name e.g. "devtree.dtb" +- fdt_addr_r e.g. "0x83000000" + +Optionally, "fdt_high" and "initrd_high" can be specified as per +their rules for allowing or preventing copying of these images. + +For the "fdt chosen" startup macro, this code will then define: +- initrd_end (based on retrieving initrd_addr_r plus actual initrd_size) + +We will then load the kernel, initrd, and fdt into the specified +locations in memory in a similar way that the ATF fastmodel code +uses semihosting calls to load other boot stages and u-boot itself. diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index e851702..96978f5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -10,6 +10,14 @@ #define DEBUG +#ifdef CONFIG_BASE_FVP +#ifndef CONFIG_SEMIHOSTING +#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +#endif +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ARMV8_SWITCH_TO_EL1 +#endif + #define CONFIG_REMAKE_ELF /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ @@ -28,8 +36,14 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ +#ifdef CONFIG_BASE_FVP +/* ATF loads u-boot here for BASE_FVP model */ +#define CONFIG_SYS_TEXT_BASE 0x88000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#else #define CONFIG_SYS_TEXT_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#endif /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT @@ -37,7 +51,11 @@ #define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ +#ifdef CONFIG_BASE_FVP +#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#else #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#endif /* CS register bases for the original memory map. */ #define V2M_PA_CS0 0x00000000 @@ -93,8 +111,13 @@ #define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ /* Generic Interrupt Controller Definitions */ +#ifdef CONFIG_BASE_FVP +#define GICD_BASE (0x2f000000) +#define GICC_BASE (0x2c000000) +#else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) +#endif #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) @@ -114,7 +137,6 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_SERIAL0 V2M_UART0 #define CONFIG_SYS_SERIAL1 V2M_UART1 @@ -158,17 +180,41 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Initial environment variables */ +#ifdef CONFIG_BASE_FVP +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_name=uImage\0" \ + "kernel_addr_r=0x80000000\0" \ + "initrd_name=ramdisk.img\0" \ + "initrd_addr_r=0x88000000\0" \ + "fdt_name=devtree.dtb\0" \ + "fdt_addr_r=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" + +#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\ + "0x1c090000 debug user_debug=31 "\ + "loglevel=9" + +#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \ + "fdt chosen $initrd_addr_r $initrd_end; " \ + "bootm $kernel_addr_r - $fdt_addr_r" + +#define CONFIG_BOOTDELAY 1 + +#else + #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=0x200000\0" \ - "initrd_addr=0xa00000\0" \ + "kernel_addr_r=0x200000\0" \ + "initrd_addr_r=0xa00000\0" \ "initrd_size=0x2000000\0" \ - "fdt_addr=0x100000\0" \ + "fdt_addr_r=0x100000\0" \ "fdt_high=0xa0000000\0" #define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" -#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \ - "$initrd_addr:$initrd_size $fdt_addr" +#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ + "$initrd_addr_r:$initrd_size $fdt_addr_r" #define CONFIG_BOOTDELAY -1 +#endif /* Do not preserve environment */ #define CONFIG_ENV_IS_NOWHERE 1 @@ -180,7 +226,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 -- 1.7.9.5

2 2

[U-Boot] [UBOOT][PATCH] mtd: spi: fix quad bit set path
by Sourav Poddar 23 May '14

23 May '14

Currently, flash quad bit is set in "spi_flash_validate_params" and later at the end in the same api, we write 0 to status register for few flashes, thereby overriding the quad bit set. This fix moves the quad bit setting outside this api in "spi_flash_probe_slave" Signed-off-by: Sourav Poddar <sourav.poddar(a)ti.com> --- drivers/mtd/spi/sf_probe.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 0a46fe3..8482f08 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -197,16 +197,6 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, /* Go for default supported write cmd */ flash->write_cmd = CMD_PAGE_PROGRAM; - /* Set the quad enable bit - only for quad commands */ - if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || - (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || - (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { - if (spi_flash_set_qeb(flash, idcode[0])) { - debug("SF: Fail to set QEB for %02x\n", idcode[0]); - return NULL; - } - } - /* Read dummy_byte: dummy byte is determined based on the * dummy cycles of a particular command. * Fast commands - dummy_byte = dummy_cycles/8 @@ -327,6 +317,16 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) if (!flash) goto err_read_id; + /* Set the quad enable bit - only for quad commands */ + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { + if (spi_flash_set_qeb(flash, idcode[0])) { + debug("SF: Fail to set QEB for %02x\n", idcode[0]); + return NULL; + } + } + #ifdef CONFIG_OF_CONTROL if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { debug("SF: FDT decode error\n"); -- 1.7.9.5

2 1

[U-Boot] [PATCH] sf: params: Added support for Spansion S25FL512S_512K
by Michal Simek 23 May '14

23 May '14

From: Siva Durga Prasad Paladugu <siva.durga.paladugu(a)xilinx.com> Added support for Spansion chip "S25FL512S_512K". Signed-off-by: Siva Durga Prasad Paladugu <sivadur(a)xilinx.com> Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- drivers/mtd/spi/sf_params.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index eb372b7..ac886fd 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -60,6 +60,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL, WR_QPP}, {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP}, #endif #ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, -- 1.8.2.3

3 3

[U-Boot] [PATCH v2] spi: soft_spi: Support NULL din/dout buffers
by Andrew Ruder 23 May '14

23 May '14

This mirrors the conventions used in other SPI drivers (kirkwood, davinci, atmel, et al) where the din/dout buffer can be NULL when the received/transmitted data isn't important. This reduces the need for allocating additional buffers when write-only/read-only functionality is needed. In the din == NULL case, the received data is simply not stored. In the dout == NULL case, zeroes are transmitted. Signed-off-by: Andrew Ruder <andrew.ruder(a)elecsyscorp.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj(a)jcrosoft.com> Cc: Jagan Teki <jagannadh.teki(a)gmail.com> --- Cleaned up errors/warnings from checkpatch.pl. I'm surprised they were flagged by the script since the actual ERRORs were all on lines I didn't change but were only included in the context. scripts/checkpatch.pl 0001-spi-soft_spi-Support-NULL-din-dout-buffers.patch total: 0 errors, 0 warnings, 0 checks, 31 lines checked drivers/spi/soft_spi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c index 5d22351..c969be3 100644 --- a/drivers/spi/soft_spi.c +++ b/drivers/spi/soft_spi.c @@ -136,10 +136,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, /* * Check if it is time to work on a new byte. */ - if((j % 8) == 0) { - tmpdout = *txd++; + if ((j % 8) == 0) { + if (txd) + tmpdout = *txd++; + else + tmpdout = 0; if(j != 0) { - *rxd++ = tmpdin; + if (rxd) + *rxd++ = tmpdin; } tmpdin = 0; } @@ -164,9 +168,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, * bits over to left-justify them. Then store the last byte * read in. */ - if((bitlen % 8) != 0) - tmpdin <<= 8 - (bitlen % 8); - *rxd++ = tmpdin; + if (rxd) { + if ((bitlen % 8) != 0) + tmpdin <<= 8 - (bitlen % 8); + *rxd++ = tmpdin; + } if (flags & SPI_XFER_END) spi_cs_deactivate(slave); -- 1.9.0.rc3.12.gbc97e2d

2 1

[U-Boot] [PATCH v2] mmc: Handle switch error status bit in MMC card status
by Andrew Gabbasov 23 May '14

23 May '14

MMC switch command for unsupported feature (e.g. bus width) sets a switch error bit in card status. This bit should be checked, and, if it's set, no access with new controller settings should be performed. Signed-off-by: Andrew Gabbasov <andrew_gabbasov(a)mentor.com> --- drivers/mmc/mmc.c | 4 +++- include/mmc.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 16051e5..a850085 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -150,6 +150,8 @@ int mmc_send_status(struct mmc *mmc, int timeout) #endif return TIMEOUT; } + if (cmd.response[0] & MMC_STATUS_SWITCH_ERROR) + return SWITCH_ERR; return 0; } @@ -501,7 +503,7 @@ static int mmc_change_freq(struct mmc *mmc) err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); if (err) - return err; + return err == SWITCH_ERR ? 0 : err; /* Now check to see that it worked */ err = mmc_send_ext_csd(mmc, ext_csd); diff --git a/include/mmc.h b/include/mmc.h index c0a1d9e..213c112 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -53,6 +53,7 @@ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 #define IN_PROGRESS -20 /* operation is in progress */ +#define SWITCH_ERR -21 /* Card reports failure to switch mode */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -108,6 +109,7 @@ #define SECURE_ERASE 0x80000000 #define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_SWITCH_ERROR (1 << 7) #define MMC_STATUS_RDY_FOR_DATA (1 << 8) #define MMC_STATUS_CURR_STATE (0xf << 9) #define MMC_STATUS_ERROR (1 << 19) -- 1.7.10.4

2 1