April 2014 - U-Boot

[U-Boot] [PATCH] MIPS: drop incaip board
by Daniel Schwierzeck 17 Apr '14

17 Apr '14

This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck(a)gmail.com> Cc: Wolfgang Denk <wd(a)denx.de> --- MAKEALL | 4 - arch/mips/cpu/mips32/incaip/Makefile | 9 - arch/mips/cpu/mips32/incaip/asc_serial.c | 300 ---- arch/mips/cpu/mips32/incaip/asc_serial.h | 177 -- arch/mips/cpu/mips32/incaip/config.mk | 8 - arch/mips/cpu/mips32/incaip/incaip_clock.c | 100 -- arch/mips/cpu/mips32/incaip/incaip_wdt.S | 55 - arch/mips/include/asm/inca-ip.h | 2430 ---------------------------- arch/mips/include/asm/u-boot-mips.h | 2 - arch/mips/lib/board.c | 3 - board/incaip/Makefile | 9 - board/incaip/README | 57 - board/incaip/config.mk | 16 - board/incaip/flash.c | 655 -------- board/incaip/incaip.c | 110 -- board/incaip/lowlevel_init.S | 287 ---- boards.cfg | 4 - doc/README.scrapyard | 1 + drivers/net/Makefile | 1 - drivers/net/inca-ip_sw.c | 793 --------- include/common.h | 3 - include/configs/incaip.h | 177 -- include/netdev.h | 1 - 23 files changed, 1 insertion(+), 5201 deletions(-) delete mode 100644 arch/mips/cpu/mips32/incaip/Makefile delete mode 100644 arch/mips/cpu/mips32/incaip/asc_serial.c delete mode 100644 arch/mips/cpu/mips32/incaip/asc_serial.h delete mode 100644 arch/mips/cpu/mips32/incaip/config.mk delete mode 100644 arch/mips/cpu/mips32/incaip/incaip_clock.c delete mode 100644 arch/mips/cpu/mips32/incaip/incaip_wdt.S delete mode 100644 arch/mips/include/asm/inca-ip.h delete mode 100644 board/incaip/Makefile delete mode 100644 board/incaip/README delete mode 100644 board/incaip/config.mk delete mode 100644 board/incaip/flash.c delete mode 100644 board/incaip/incaip.c delete mode 100644 board/incaip/lowlevel_init.S delete mode 100644 drivers/net/inca-ip_sw.c delete mode 100644 include/configs/incaip.h diff --git a/MAKEALL b/MAKEALL index 705a0bb..c54240c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -419,10 +419,6 @@ LIST_arm="$(targets_by_arch arm | \ ######################################################################### LIST_mips4kc=" \ - incaip \ - incaip_100MHz \ - incaip_133MHz \ - incaip_150MHz \ qemu_mips \ vct_platinum \ vct_platinum_small \ diff --git a/arch/mips/cpu/mips32/incaip/Makefile b/arch/mips/cpu/mips32/incaip/Makefile deleted file mode 100644 index 7341a4a..0000000 --- a/arch/mips/cpu/mips32/incaip/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = incaip_wdt.o -obj-y += incaip_clock.o asc_serial.o diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c deleted file mode 100644 index 6f0e4f2..0000000 --- a/arch/mips/cpu/mips32/incaip/asc_serial.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * (INCA) ASC UART support - */ - -#include <config.h> -#include <common.h> -#include <asm/inca-ip.h> -#include <serial.h> -#include <linux/compiler.h> -#include "asc_serial.h" - - -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -extern uint incaip_get_fpiclk(void); - -static int serial_setopt (void); - -/* pointer to ASC register base address */ -static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC; - -/****************************************************************************** -* -* serial_init - initialize a INCAASC channel -* -* This routine initializes the number of data bits, parity -* and set the selected baud rate. Interrupts are disabled. -* Set the modem control signals if the option is selected. -* -* RETURNS: N/A -*/ - -static int asc_serial_init(void) -{ - /* we have to set PMU.EN13 bit to enable an ASC device*/ - INCAASC_PMU_ENABLE(13); - - /* and we have to set CLC register*/ - CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS); - SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001); - - /* initialy we are in async mode */ - pAsc->asc_con = ASCCON_M_8ASYNC; - - /* select input port */ - pAsc->asc_pisel = (CONSOLE_TTY & 0x1); - - /* TXFIFO's filling level */ - SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK, - ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL); - /* enable TXFIFO */ - SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN); - - /* RXFIFO's filling level */ - SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK, - ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL); - /* enable RXFIFO */ - SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN); - - /* enable error signals */ - SET_BIT(pAsc->asc_con, ASCCON_FEN); - SET_BIT(pAsc->asc_con, ASCCON_OEN); - - /* acknowledge ASC interrupts */ - ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL); - - /* disable ASC interrupts */ - ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL); - - /* set FIFOs into the transparent mode */ - SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN); - SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN); - - /* set baud rate */ - serial_setbrg(); - - /* set the options */ - serial_setopt(); - - return 0; -} - -static void asc_serial_setbrg(void) -{ - ulong uiReloadValue, fdv; - ulong f_ASC; - - f_ASC = incaip_get_fpiclk(); - -#ifndef INCAASC_USE_FDV - fdv = 2; - uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1; -#else - fdv = INCAASC_FDV_HIGH_BAUDRATE; - uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1; -#endif /* INCAASC_USE_FDV */ - - if ( (uiReloadValue < 0) || (uiReloadValue > 8191) ) - { -#ifndef INCAASC_USE_FDV - fdv = 3; - uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1; -#else - fdv = INCAASC_FDV_LOW_BAUDRATE; - uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1; -#endif /* INCAASC_USE_FDV */ - - if ( (uiReloadValue < 0) || (uiReloadValue > 8191) ) - { - return; /* can't impossibly generate that baud rate */ - } - } - - /* Disable Baud Rate Generator; BG should only be written when R=0 */ - CLEAR_BIT(pAsc->asc_con, ASCCON_R); - -#ifndef INCAASC_USE_FDV - /* - * Disable Fractional Divider (FDE) - * Divide clock by reload-value + constant (BRS) - */ - /* FDE = 0 */ - CLEAR_BIT(pAsc->asc_con, ASCCON_FDE); - - if ( fdv == 2 ) - CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */ - else - SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */ - -#else /* INCAASC_USE_FDV */ - - /* Enable Fractional Divider */ - SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */ - - /* Set fractional divider value */ - pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK; - -#endif /* INCAASC_USE_FDV */ - - /* Set reload value in BG */ - pAsc->asc_bg = uiReloadValue; - - /* Enable Baud Rate Generator */ - SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */ -} - -/******************************************************************************* -* -* serial_setopt - set the serial options -* -* Set the channel operating mode to that specified. Following options -* are supported: CREAD, CSIZE, PARENB, and PARODD. -* -* Note, this routine disables the transmitter. The calling routine -* may have to re-enable it. -* -* RETURNS: -* Returns 0 to indicate success, otherwise -1 is returned -*/ - -static int serial_setopt (void) -{ - ulong con; - - switch ( ASC_OPTIONS & ASCOPT_CSIZE ) - { - /* 7-bit-data */ - case ASCOPT_CS7: - con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */ - break; - - /* 8-bit-data */ - case ASCOPT_CS8: - if ( ASC_OPTIONS & ASCOPT_PARENB ) - con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */ - else - con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */ - break; - - /* - * only 7 and 8-bit frames are supported - * if we don't use IOCTL extensions - */ - default: - return -1; - } - - if ( ASC_OPTIONS & ASCOPT_STOPB ) - SET_BIT(con, ASCCON_STP); /* 2 stop bits */ - else - CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */ - - if ( ASC_OPTIONS & ASCOPT_PARENB ) - SET_BIT(con, ASCCON_PEN); /* enable parity checking */ - else - CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */ - - if ( ASC_OPTIONS & ASCOPT_PARODD ) - SET_BIT(con, ASCCON_ODD); /* odd parity */ - else - CLEAR_BIT(con, ASCCON_ODD); /* even parity */ - - if ( ASC_OPTIONS & ASCOPT_CREAD ) - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */ - - pAsc->asc_con |= con; - - return 0; -} - -static void asc_serial_putc(const char c) -{ - uint txFl = 0; - - if (c == '\n') serial_putc ('\r'); - - /* check do we have a free space in the TX FIFO */ - /* get current filling level */ - do - { - txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF; - } - while ( txFl == INCAASC_TXFIFO_FULL ); - - pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */ - - /* check for errors */ - if ( pAsc->asc_con & ASCCON_OE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE); - return; - } -} - -static int asc_serial_getc(void) -{ - ulong symbol_mask; - char c; - - while (!serial_tstc()); - - symbol_mask = - ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff); - - c = (char)(pAsc->asc_rbuf & symbol_mask); - - return c; -} - -static int asc_serial_tstc(void) -{ - int res = 1; - - if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 ) - { - res = 0; - } - else if ( pAsc->asc_con & ASCCON_FE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE); - res = 0; - } - else if ( pAsc->asc_con & ASCCON_PE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE); - res = 0; - } - else if ( pAsc->asc_con & ASCCON_OE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE); - res = 0; - } - - return res; -} - -static struct serial_device asc_serial_drv = { - .name = "asc_serial", - .start = asc_serial_init, - .stop = NULL, - .setbrg = asc_serial_setbrg, - .putc = asc_serial_putc, - .puts = default_serial_puts, - .getc = asc_serial_getc, - .tstc = asc_serial_tstc, -}; - -void asc_serial_initialize(void) -{ - serial_register(&asc_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &asc_serial_drv; -} diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h deleted file mode 100644 index 7ffdcfa..0000000 --- a/arch/mips/cpu/mips32/incaip/asc_serial.h +++ /dev/null @@ -1,177 +0,0 @@ -/* incaAscSio.h - (INCA) ASC UART tty driver header */ - -#ifndef __INCincaAscSioh -#define __INCincaAscSioh - -#include <asm/inca-ip.h> - -/* channel operating modes */ -#define ASCOPT_CSIZE 0x00000003 -#define ASCOPT_CS7 0x00000001 -#define ASCOPT_CS8 0x00000002 -#define ASCOPT_PARENB 0x00000004 -#define ASCOPT_STOPB 0x00000008 -#define ASCOPT_PARODD 0x00000010 -#define ASCOPT_CREAD 0x00000020 - -#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) - -/* ASC input select (0 or 1) */ -#define CONSOLE_TTY 0 - -/* use fractional divider for baudrate settings */ -#define INCAASC_USE_FDV - -#ifdef INCAASC_USE_FDV - #define INCAASC_FDV_LOW_BAUDRATE 71 - #define INCAASC_FDV_HIGH_BAUDRATE 453 -#endif /*INCAASC_USE_FDV*/ - - -#define INCAASC_TXFIFO_FL 1 -#define INCAASC_RXFIFO_FL 1 -#define INCAASC_TXFIFO_FULL 16 - -/* interrupt lines masks for the ASC device interrupts*/ -/* change these macroses if it's necessary */ -#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */ - -#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */ -#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */ -#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */ -#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/ - -/* interrupt controller access macros */ -#define ASC_INTERRUPTS_ENABLE(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X; -#define ASC_INTERRUPTS_DISABLE(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X; -#define ASC_INTERRUPTS_CLEAR(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X; - -/* CLC register's bits and bitfields */ -#define ASCCLC_DISR 0x00000001 -#define ASCCLC_DISS 0x00000002 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 - -/* CON register's bits and bitfields */ -#define ASCCON_MODEMASK 0x0007 - #define ASCCON_M_8SYNC 0x0 - #define ASCCON_M_8ASYNC 0x1 - #define ASCCON_M_8IRDAASYNC 0x2 - #define ASCCON_M_7ASYNCPAR 0x3 - #define ASCCON_M_9ASYNC 0x4 - #define ASCCON_M_8WAKEUPASYNC 0x5 - #define ASCCON_M_8ASYNCPAR 0x7 -#define ASCCON_STP 0x0008 -#define ASCCON_REN 0x0010 -#define ASCCON_PEN 0x0020 -#define ASCCON_FEN 0x0040 -#define ASCCON_OEN 0x0080 -#define ASCCON_PE 0x0100 -#define ASCCON_FE 0x0200 -#define ASCCON_OE 0x0400 -#define ASCCON_FDE 0x0800 -#define ASCCON_ODD 0x1000 -#define ASCCON_BRS 0x2000 -#define ASCCON_LB 0x4000 -#define ASCCON_R 0x8000 - -/* WHBCON register's bits and bitfields */ -#define ASCWHBCON_CLRREN 0x0010 -#define ASCWHBCON_SETREN 0x0020 -#define ASCWHBCON_CLRPE 0x0100 -#define ASCWHBCON_CLRFE 0x0200 -#define ASCWHBCON_CLROE 0x0400 -#define ASCWHBCON_SETPE 0x0800 -#define ASCWHBCON_SETFE 0x1000 -#define ASCWHBCON_SETOE 0x2000 - -/* ABCON register's bits and bitfields */ -#define ASCABCON_ABEN 0x0001 -#define ASCABCON_AUREN 0x0002 -#define ASCABCON_ABSTEN 0x0004 -#define ASCABCON_ABDETEN 0x0008 -#define ASCABCON_FCDETEN 0x0010 -#define ASCABCON_EMMASK 0x0300 - #define ASCABCON_EMOFF 8 - #define ASCABCON_EM_DISAB 0x0 - #define ASCABCON_EM_DURAB 0x1 - #define ASCABCON_EM_ALWAYS 0x2 -#define ASCABCON_TXINV 0x0400 -#define ASCABCON_RXINV 0x0800 - -/* FDV register mask, offset and bitfields*/ -#define ASCFDV_VALUE_MASK 0x000001FF - -/* WHBABCON register's bits and bitfields */ -#define ASCWHBABCON_SETABEN 0x0001 -#define ASCWHBABCON_CLRABEN 0x0002 - -/* ABSTAT register's bits and bitfields */ -#define ASCABSTAT_FCSDET 0x0001 -#define ASCABSTAT_FCCDET 0x0002 -#define ASCABSTAT_SCSDET 0x0004 -#define ASCABSTAT_SCCDET 0x0008 -#define ASCABSTAT_DETWAIT 0x0010 - -/* WHBABSTAT register's bits and bitfields */ -#define ASCWHBABSTAT_CLRFCSDET 0x0001 -#define ASCWHBABSTAT_SETFCSDET 0x0002 -#define ASCWHBABSTAT_CLRFCCDET 0x0004 -#define ASCWHBABSTAT_SETFCCDET 0x0008 -#define ASCWHBABSTAT_CLRSCSDET 0x0010 -#define ASCWHBABSTAT_SETSCSDET 0x0020 -#define ASCWHBABSTAT_SETSCCDET 0x0040 -#define ASCWHBABSTAT_CLRSCCDET 0x0080 -#define ASCWHBABSTAT_CLRDETWAIT 0x0100 -#define ASCWHBABSTAT_SETDETWAIT 0x0200 - -/* TXFCON register's bits and bitfields */ -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXTMEN 0x0004 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 - -/* RXFCON register's bits and bitfields */ -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXTMEN 0x0004 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 - -/* FSTAT register's bits and bitfields */ -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT); - -typedef struct /* incaAsc_t */ -{ - volatile unsigned long asc_clc; /*0x0000*/ - volatile unsigned long asc_pisel; /*0x0004*/ - volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/ - volatile unsigned long asc_con; /*0x0010*/ - volatile unsigned long asc_bg; /*0x0014*/ - volatile unsigned long asc_fdv; /*0x0018*/ - volatile unsigned long asc_pmw; /* not used */ /*0x001C*/ - volatile unsigned long asc_tbuf; /*0x0020*/ - volatile unsigned long asc_rbuf; /*0x0024*/ - volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/ - volatile unsigned long asc_abcon; /*0x0030*/ - volatile unsigned long asc_abstat; /* not used */ /*0x0034*/ - volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/ - volatile unsigned long asc_rxfcon; /*0x0040*/ - volatile unsigned long asc_txfcon; /*0x0044*/ - volatile unsigned long asc_fstat; /*0x0048*/ - volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/ - volatile unsigned long asc_whbcon; /*0x0050*/ - volatile unsigned long asc_whbabcon; /*0x0054*/ - volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/ - -} incaAsc_t; - -#endif /* __INCincaAscSioh */ diff --git a/arch/mips/cpu/mips32/incaip/config.mk b/arch/mips/cpu/mips32/incaip/config.mk deleted file mode 100644 index 5c89129..0000000 --- a/arch/mips/cpu/mips32/incaip/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2011 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mtune=4kc diff --git a/arch/mips/cpu/mips32/incaip/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c deleted file mode 100644 index efada9f..0000000 --- a/arch/mips/cpu/mips32/incaip/incaip_clock.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/inca-ip.h> - - -/******************************************************************************* -* -* get_cpuclk - returns the frequency of the CPU. -* -* Gets the value directly from the INCA-IP hardware. -* -* RETURNS: -* 150.000.000 for 150 MHz -* 133.333.333 for 133 MHz (= 400MHz/3) -* 100.000.000 for 100 MHz (= 400MHz/4) -* NOTE: -* This functions should be used by the hardware driver to get the correct -* frequency of the CPU. Don't use the macros, which are set to init the CPU -* frequency in the ROM code. -*/ -uint incaip_get_cpuclk (void) -{ - /*-------------------------------------------------------------------------*/ - /* CPU Clock Input Multiplexer (MUX I) */ - /* Multiplexer MUX I selects the maximum input clock to the CPU. */ - /*-------------------------------------------------------------------------*/ - if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) & - INCA_IP_CGU_CGU_MUXCR_MUXI) { - /* MUX I set to 150 MHz clock */ - return 150000000; - } else { - /* MUX I set to 100/133 MHz clock */ - if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) { - /* Division value is 1/3, maximum CPU operating */ - /* frequency is 133.3 MHz */ - return 133333333; - } else { - /* Division value is 1/4, maximum CPU operating */ - /* frequency is 100 MHz */ - return 100000000; - } - } -} - -/******************************************************************************* -* -* get_fpiclk - returns the frequency of the FPI bus. -* -* Gets the value directly from the INCA-IP hardware. -* -* RETURNS: Frquency in Hz -* -* NOTE: -* This functions should be used by the hardware driver to get the correct -* frequency of the CPU. Don't use the macros, which are set to init the CPU -* frequency in the ROM code. -* The calculation for the -*/ -uint incaip_get_fpiclk (void) -{ - uint clkCPU; - - clkCPU = incaip_get_cpuclk (); - - switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) { - case 0x4: - return clkCPU >> 1; /* devided by 2 */ - break; - case 0x8: - return clkCPU >> 2; /* devided by 4 */ - break; - default: - return clkCPU; - break; - } -} - -int incaip_set_cpuclk (void) -{ - extern void ebu_init(long); - extern void cgu_init(long); - extern void sdram_init(long); - char tmp[64]; - ulong cpuclk; - - if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) { - cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; - cgu_init (cpuclk); - ebu_init (cpuclk); - sdram_init (cpuclk); - } - - return 0; -} diff --git a/arch/mips/cpu/mips32/incaip/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S deleted file mode 100644 index b15320a..0000000 --- a/arch/mips/cpu/mips32/incaip/incaip_wdt.S +++ /dev/null @@ -1,55 +0,0 @@ -/* - * INCA-IP Watchdog timer management code. - * - * Copyright (c) 2003 Wolfgang Denk <wd(a)denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <config.h> -#include <asm/regdef.h> - - -#define WD_BASE 0xb8000000 -#define WD_CON0(value) 0x0020(value) -#define WD_CON1(value) 0x0024(value) -#define WD_DISABLE 0x00000008 -#define WD_ENABLE 0x00000000 -#define WD_WRITE_PW 0xFFFC00F8 -#define WD_WRITE_ENDINIT 0xFFFC00F3 -#define WD_WRITE_INIT 0xFFFC00F2 - - - .globl disable_incaip_wdt -disable_incaip_wdt: - li t0, WD_BASE - - /* Calculate password. - */ - lw t2, WD_CON1(t0) - and t2, 0xC - - lw t3, WD_CON0(t0) - and t3, 0xFFFFFF01 - - or t3, t2 - or t3, 0xF0 - - sw t3, WD_CON0(t0) /* write password */ - - /* Clear ENDINIT. - */ - li t1, WD_WRITE_INIT - sw t1, WD_CON0(t0) - - - li t1, WD_DISABLE - sw t1, WD_CON1(t0) /* disable watchdog */ - li t1, WD_WRITE_PW - sw t1, WD_CON0(t0) /* write password */ - li t1, WD_WRITE_ENDINIT - sw t1, WD_CON0(t0) /* end command */ - - jr ra - nop diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h deleted file mode 100644 index 5f03e2a..0000000 --- a/arch/mips/include/asm/inca-ip.h +++ /dev/null @@ -1,2430 +0,0 @@ -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - - -/***********************************************************************/ -/* Module : WDT register address and bits */ -/***********************************************************************/ - -#define INCA_IP_WDT (0xB8000000) -/***********************************************************************/ - - -/***Reset Status Register Power On***/ -#define INCA_IP_WDT_RST_SR ((volatile u32*)(INCA_IP_WDT+ 0x0014)) - -/***Reset Request Register***/ -#define INCA_IP_WDT_RST_REQ ((volatile u32*)(INCA_IP_WDT+ 0x0010)) -#define INCA_IP_WDT_RST_REQ_SWBOOT (1 << 24) -#define INCA_IP_WDT_RST_REQ_SWCFG (1 << 16) -#define INCA_IP_WDT_RST_REQ_RRPHY (1 << 5) -#define INCA_IP_WDT_RST_REQ_RRHSP (1 << 4) -#define INCA_IP_WDT_RST_REQ_RRFPI (1 << 3) -#define INCA_IP_WDT_RST_REQ_RREXT (1 << 2) -#define INCA_IP_WDT_RST_REQ_RRDSP (1 << 1) -#define INCA_IP_WDT_RST_REQ_RRCPU (1 << 0) - -/***NMI Status Register***/ -#define INCA_IP_WDT_NMISR ((volatile u32*)(INCA_IP_WDT+ 0x002C)) -#define INCA_IP_WDT_NMISR_NMIWDT (1 << 2) -#define INCA_IP_WDT_NMISR_NMIPLL (1 << 1) -#define INCA_IP_WDT_NMISR_NMIEXT (1 << 0) - -/***Manufacturer Identification Register***/ -#define INCA_IP_WDT_MANID ((volatile u32*)(INCA_IP_WDT+ 0x0070)) -#define INCA_IP_WDT_MANID_MANUF (value) (((( 1 << 11) - 1) & (value)) << 5) - -/***Chip Identification Register***/ -#define INCA_IP_WDT_CHIPID ((volatile u32*)(INCA_IP_WDT+ 0x0074)) -#define INCA_IP_WDT_CHIPID_VERSION (value) (((( 1 << 4) - 1) & (value)) << 28) -#define INCA_IP_WDT_CHIPID_PART_NUMBER (value) (((( 1 << 16) - 1) & (value)) << 12) -#define INCA_IP_WDT_CHIPID_MANID (value) (((( 1 << 11) - 1) & (value)) << 1) - -/***Redesign Tracing Identification Register***/ -#define INCA_IP_WDT_RTID ((volatile u32*)(INCA_IP_WDT+ 0x0078)) -#define INCA_IP_WDT_RTID_LC (1 << 15) -#define INCA_IP_WDT_RTID_RIX (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Watchdog Timer Control Register 0***/ -#define INCA_IP_WDT_WDT_CON0 ((volatile u32*)(INCA_IP_WDT+ 0x0020)) - -/***Watchdog Timer Control Register 1***/ -#define INCA_IP_WDT_WDT_CON1 ((volatile u32*)(INCA_IP_WDT+ 0x0024)) -#define INCA_IP_WDT_WDT_CON1_WDTDR (1 << 3) -#define INCA_IP_WDT_WDT_CON1_WDTIR (1 << 2) - -/***Watchdog Timer Status Register***/ -#define INCA_IP_WDT_WDT_SR ((volatile u32*)(INCA_IP_WDT+ 0x0028)) -#define INCA_IP_WDT_WDT_SR_WDTTIM (value) (((( 1 << 16) - 1) & (value)) << 16) -#define INCA_IP_WDT_WDT_SR_WDTPR (1 << 5) -#define INCA_IP_WDT_WDT_SR_WDTTO (1 << 4) -#define INCA_IP_WDT_WDT_SR_WDTDS (1 << 3) -#define INCA_IP_WDT_WDT_SR_WDTIS (1 << 2) -#define INCA_IP_WDT_WDT_SR_WDTOE (1 << 1) -#define INCA_IP_WDT_WDT_SR_WDTAE (1 << 0) - -/***********************************************************************/ -/* Module : CGU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_CGU (0xBF107000) -/***********************************************************************/ - - -/***CGU PLL1 Control Register***/ -#define INCA_IP_CGU_CGU_PLL1CR ((volatile u32*)(INCA_IP_CGU+ 0x0008)) -#define INCA_IP_CGU_CGU_PLL1CR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_PLL1CR_EN (1 << 30) -#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***CGU PLL0 Control Register***/ -#define INCA_IP_CGU_CGU_PLL0CR ((volatile u32*)(INCA_IP_CGU+ 0x0000)) -#define INCA_IP_CGU_CGU_PLL0CR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_PLL0CR_EN (1 << 30) -#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***CGU PLL0 Status Register***/ -#define INCA_IP_CGU_CGU_PLL0SR ((volatile u32*)(INCA_IP_CGU+ 0x0004)) -#define INCA_IP_CGU_CGU_PLL0SR_LOCK (1 << 31) -#define INCA_IP_CGU_CGU_PLL0SR_RCF (1 << 29) -#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP (1 << 15) - -/***CGU PLL1 Status Register***/ -#define INCA_IP_CGU_CGU_PLL1SR ((volatile u32*)(INCA_IP_CGU+ 0x000C)) -#define INCA_IP_CGU_CGU_PLL1SR_LOCK (1 << 31) -#define INCA_IP_CGU_CGU_PLL1SR_RCF (1 << 29) -#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP (1 << 15) - -/***CGU Divider Control Register***/ -#define INCA_IP_CGU_CGU_DIVCR ((volatile u32*)(INCA_IP_CGU+ 0x0010)) - -/***CGU Multiplexer Control Register***/ -#define INCA_IP_CGU_CGU_MUXCR ((volatile u32*)(INCA_IP_CGU+ 0x0014)) -#define INCA_IP_CGU_CGU_MUXCR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_MUXCR_MUXII (1 << 1) -#define INCA_IP_CGU_CGU_MUXCR_MUXI (1 << 0) - -/***CGU Fractional Divider Control Register***/ -#define INCA_IP_CGU_CGU_FDCR ((volatile u32*)(INCA_IP_CGU+ 0x0018)) -#define INCA_IP_CGU_CGU_FDCR_FDEN (1 << 31) -#define INCA_IP_CGU_CGU_FDCR_INTEGER (value) (((( 1 << 12) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_FDCR_FRACTION (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : PMU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_PMU (0xBF102000) -/***********************************************************************/ - - -/***PM Global Enable Register***/ -#define INCA_IP_PMU_PM_GEN ((volatile u32*)(INCA_IP_PMU+ 0x0000)) -#define INCA_IP_PMU_PM_GEN_EN16 (1 << 16) -#define INCA_IP_PMU_PM_GEN_EN15 (1 << 15) -#define INCA_IP_PMU_PM_GEN_EN14 (1 << 14) -#define INCA_IP_PMU_PM_GEN_EN13 (1 << 13) -#define INCA_IP_PMU_PM_GEN_EN12 (1 << 12) -#define INCA_IP_PMU_PM_GEN_EN11 (1 << 11) -#define INCA_IP_PMU_PM_GEN_EN10 (1 << 10) -#define INCA_IP_PMU_PM_GEN_EN9 (1 << 9) -#define INCA_IP_PMU_PM_GEN_EN8 (1 << 8) -#define INCA_IP_PMU_PM_GEN_EN7 (1 << 7) -#define INCA_IP_PMU_PM_GEN_EN6 (1 << 6) -#define INCA_IP_PMU_PM_GEN_EN5 (1 << 5) -#define INCA_IP_PMU_PM_GEN_EN4 (1 << 4) -#define INCA_IP_PMU_PM_GEN_EN3 (1 << 3) -#define INCA_IP_PMU_PM_GEN_EN2 (1 << 2) -#define INCA_IP_PMU_PM_GEN_EN0 (1 << 0) - -/***PM Power Down Enable Register***/ -#define INCA_IP_PMU_PM_PDEN ((volatile u32*)(INCA_IP_PMU+ 0x0008)) -#define INCA_IP_PMU_PM_PDEN_EN16 (1 << 16) -#define INCA_IP_PMU_PM_PDEN_EN15 (1 << 15) -#define INCA_IP_PMU_PM_PDEN_EN14 (1 << 14) -#define INCA_IP_PMU_PM_PDEN_EN13 (1 << 13) -#define INCA_IP_PMU_PM_PDEN_EN12 (1 << 12) -#define INCA_IP_PMU_PM_PDEN_EN11 (1 << 11) -#define INCA_IP_PMU_PM_PDEN_EN10 (1 << 10) -#define INCA_IP_PMU_PM_PDEN_EN9 (1 << 9) -#define INCA_IP_PMU_PM_PDEN_EN8 (1 << 8) -#define INCA_IP_PMU_PM_PDEN_EN7 (1 << 7) -#define INCA_IP_PMU_PM_PDEN_EN5 (1 << 5) -#define INCA_IP_PMU_PM_PDEN_EN4 (1 << 4) -#define INCA_IP_PMU_PM_PDEN_EN3 (1 << 3) -#define INCA_IP_PMU_PM_PDEN_EN2 (1 << 2) -#define INCA_IP_PMU_PM_PDEN_EN0 (1 << 0) - -/***PM Wake-Up from Power Down Register***/ -#define INCA_IP_PMU_PM_WUP ((volatile u32*)(INCA_IP_PMU+ 0x0010)) -#define INCA_IP_PMU_PM_WUP_WUP16 (1 << 16) -#define INCA_IP_PMU_PM_WUP_WUP15 (1 << 15) -#define INCA_IP_PMU_PM_WUP_WUP14 (1 << 14) -#define INCA_IP_PMU_PM_WUP_WUP13 (1 << 13) -#define INCA_IP_PMU_PM_WUP_WUP12 (1 << 12) -#define INCA_IP_PMU_PM_WUP_WUP11 (1 << 11) -#define INCA_IP_PMU_PM_WUP_WUP10 (1 << 10) -#define INCA_IP_PMU_PM_WUP_WUP9 (1 << 9) -#define INCA_IP_PMU_PM_WUP_WUP8 (1 << 8) -#define INCA_IP_PMU_PM_WUP_WUP7 (1 << 7) -#define INCA_IP_PMU_PM_WUP_WUP5 (1 << 5) -#define INCA_IP_PMU_PM_WUP_WUP4 (1 << 4) -#define INCA_IP_PMU_PM_WUP_WUP3 (1 << 3) -#define INCA_IP_PMU_PM_WUP_WUP2 (1 << 2) -#define INCA_IP_PMU_PM_WUP_WUP0 (1 << 0) - -/***PM Control Register***/ -#define INCA_IP_PMU_PM_CR ((volatile u32*)(INCA_IP_PMU+ 0x0014)) -#define INCA_IP_PMU_PM_CR_AWEN (1 << 31) -#define INCA_IP_PMU_PM_CR_SWRST (1 << 30) -#define INCA_IP_PMU_PM_CR_SWCR (1 << 2) -#define INCA_IP_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : BCU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_BCU (0xB8000100) -/***********************************************************************/ - - -/***BCU Control Register (0010H)***/ -#define INCA_IP_BCU_BCU_CON ((volatile u32*)(INCA_IP_BCU+ 0x0010)) -#define INCA_IP_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_BCU_BCU_CON_SPE (1 << 19) -#define INCA_IP_BCU_BCU_CON_PSE (1 << 18) -#define INCA_IP_BCU_BCU_CON_DBG (1 << 16) -#define INCA_IP_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***BCU Error Control Capture Register (0020H)***/ -#define INCA_IP_BCU_BCU_ECON ((volatile u32*)(INCA_IP_BCU+ 0x0020)) -#define INCA_IP_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24) -#define INCA_IP_BCU_BCU_ECON_RDN (1 << 23) -#define INCA_IP_BCU_BCU_ECON_WRN (1 << 22) -#define INCA_IP_BCU_BCU_ECON_SVM (1 << 21) -#define INCA_IP_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19) -#define INCA_IP_BCU_BCU_ECON_ABT (1 << 18) -#define INCA_IP_BCU_BCU_ECON_RDY (1 << 17) -#define INCA_IP_BCU_BCU_ECON_TOUT (1 << 16) -#define INCA_IP_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0) -#define INCA_IP_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28) - -/***BCU Error Address Capture Register (0024 H)***/ -#define INCA_IP_BCU_BCU_EADD ((volatile u32*)(INCA_IP_BCU+ 0x0024)) -#define INCA_IP_BCU_BCU_EADD_FPIADR - -/***BCU Error Data Capture Register (0028H)***/ -#define INCA_IP_BCU_BCU_EDAT ((volatile u32*)(INCA_IP_BCU+ 0x0028)) -#define INCA_IP_BCU_BCU_EDAT_FPIDAT - -/***********************************************************************/ -/* Module : MBC register address and bits */ -/***********************************************************************/ - -#define INCA_IP_MBC (0xBF103000) -/***********************************************************************/ - - -/***Mailbox CPU Configuration Register***/ -#define INCA_IP_MBC_MBC_CFG ((volatile u32*)(INCA_IP_MBC+ 0x0080)) -#define INCA_IP_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_MBC_MBC_CFG_RES (1 << 5) -#define INCA_IP_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1) -#define INCA_IP_MBC_MBC_CFG_SIZE (1 << 0) - -/***Mailbox CPU Interrupt Status Register***/ -#define INCA_IP_MBC_MBC_ISR ((volatile u32*)(INCA_IP_MBC+ 0x0084)) -#define INCA_IP_MBC_MBC_ISR_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_ISR_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_ISR_B1E (1 << 29) -#define INCA_IP_MBC_MBC_ISR_B0E (1 << 28) -#define INCA_IP_MBC_MBC_ISR_WDT (1 << 27) -#define INCA_IP_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask Register***/ -#define INCA_IP_MBC_MBC_MSK ((volatile u32*)(INCA_IP_MBC+ 0x0088)) -#define INCA_IP_MBC_MBC_MSK_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 01 Register***/ -#define INCA_IP_MBC_MBC_MSK01 ((volatile u32*)(INCA_IP_MBC+ 0x008C)) -#define INCA_IP_MBC_MBC_MSK01_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK01_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK01_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK01_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK01_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 10 Register***/ -#define INCA_IP_MBC_MBC_MSK10 ((volatile u32*)(INCA_IP_MBC+ 0x0090)) -#define INCA_IP_MBC_MBC_MSK10_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK10_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK10_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK10_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK10_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Short Command Register***/ -#define INCA_IP_MBC_MBC_CMD ((volatile u32*)(INCA_IP_MBC+ 0x0094)) -#define INCA_IP_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***Mailbox CPU Input Data of Buffer 0***/ -#define INCA_IP_MBC_MBC_ID0 ((volatile u32*)(INCA_IP_MBC+ 0x0000)) -#define INCA_IP_MBC_MBC_ID0_INDATA - -/***Mailbox CPU Input Data of Buffer 1***/ -#define INCA_IP_MBC_MBC_ID1 ((volatile u32*)(INCA_IP_MBC+ 0x0020)) -#define INCA_IP_MBC_MBC_ID1_INDATA - -/***Mailbox CPU Output Data of Buffer 2***/ -#define INCA_IP_MBC_MBC_OD2 ((volatile u32*)(INCA_IP_MBC+ 0x0040)) -#define INCA_IP_MBC_MBC_OD2_OUTDATA - -/***Mailbox CPU Output Data of Buffer 3***/ -#define INCA_IP_MBC_MBC_OD3 ((volatile u32*)(INCA_IP_MBC+ 0x0060)) -#define INCA_IP_MBC_MBC_OD3_OUTDATA - -/***Mailbox CPU Control Register of Buffer 0***/ -#define INCA_IP_MBC_MBC_CR0 ((volatile u32*)(INCA_IP_MBC+ 0x0004)) -#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 1***/ -#define INCA_IP_MBC_MBC_CR1 ((volatile u32*)(INCA_IP_MBC+ 0x0024)) -#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 2***/ -#define INCA_IP_MBC_MBC_CR2 ((volatile u32*)(INCA_IP_MBC+ 0x0044)) -#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 3***/ -#define INCA_IP_MBC_MBC_CR3 ((volatile u32*)(INCA_IP_MBC+ 0x0064)) -#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Free Space of Buffer 0***/ -#define INCA_IP_MBC_MBC_FS0 ((volatile u32*)(INCA_IP_MBC+ 0x0008)) -#define INCA_IP_MBC_MBC_FS0_FS - -/***Mailbox CPU Free Space of Buffer 1***/ -#define INCA_IP_MBC_MBC_FS1 ((volatile u32*)(INCA_IP_MBC+ 0x0028)) -#define INCA_IP_MBC_MBC_FS1_FS - -/***Mailbox CPU Free Space of Buffer 2***/ -#define INCA_IP_MBC_MBC_FS2 ((volatile u32*)(INCA_IP_MBC+ 0x0048)) -#define INCA_IP_MBC_MBC_FS2_FS - -/***Mailbox CPU Free Space of Buffer 3***/ -#define INCA_IP_MBC_MBC_FS3 ((volatile u32*)(INCA_IP_MBC+ 0x0068)) -#define INCA_IP_MBC_MBC_FS3_FS - -/***Mailbox CPU Data Available in Buffer 0***/ -#define INCA_IP_MBC_MBC_DA0 ((volatile u32*)(INCA_IP_MBC+ 0x000C)) -#define INCA_IP_MBC_MBC_DA0_DA - -/***Mailbox CPU Data Available in Buffer 1***/ -#define INCA_IP_MBC_MBC_DA1 ((volatile u32*)(INCA_IP_MBC+ 0x002C)) -#define INCA_IP_MBC_MBC_DA1_DA - -/***Mailbox CPU Data Available in Buffer 2***/ -#define INCA_IP_MBC_MBC_DA2 ((volatile u32*)(INCA_IP_MBC+ 0x004C)) -#define INCA_IP_MBC_MBC_DA2_DA - -/***Mailbox CPU Data Available in Buffer 3***/ -#define INCA_IP_MBC_MBC_DA3 ((volatile u32*)(INCA_IP_MBC+ 0x006C)) -#define INCA_IP_MBC_MBC_DA3_DA - -/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_IABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0010)) -#define INCA_IP_MBC_MBC_IABS0_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_IABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0030)) -#define INCA_IP_MBC_MBC_IABS1_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_IABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0050)) -#define INCA_IP_MBC_MBC_IABS2_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_IABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0070)) -#define INCA_IP_MBC_MBC_IABS3_IABS - -/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_ITMP0 ((volatile u32*)(INCA_IP_MBC+ 0x0014)) -#define INCA_IP_MBC_MBC_ITMP0_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_ITMP1 ((volatile u32*)(INCA_IP_MBC+ 0x0034)) -#define INCA_IP_MBC_MBC_ITMP1_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_ITMP2 ((volatile u32*)(INCA_IP_MBC+ 0x0054)) -#define INCA_IP_MBC_MBC_ITMP2_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_ITMP3 ((volatile u32*)(INCA_IP_MBC+ 0x0074)) -#define INCA_IP_MBC_MBC_ITMP3_ITMP - -/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_OABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0018)) -#define INCA_IP_MBC_MBC_OABS0_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_OABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0038)) -#define INCA_IP_MBC_MBC_OABS1_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_OABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0058)) -#define INCA_IP_MBC_MBC_OABS2_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_OABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0078)) -#define INCA_IP_MBC_MBC_OABS3_OABS - -/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_OTMP0 ((volatile u32*)(INCA_IP_MBC+ 0x001C)) -#define INCA_IP_MBC_MBC_OTMP0_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_OTMP1 ((volatile u32*)(INCA_IP_MBC+ 0x003C)) -#define INCA_IP_MBC_MBC_OTMP1_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_OTMP2 ((volatile u32*)(INCA_IP_MBC+ 0x005C)) -#define INCA_IP_MBC_MBC_OTMP2_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_OTMP3 ((volatile u32*)(INCA_IP_MBC+ 0x007C)) -#define INCA_IP_MBC_MBC_OTMP3_OTMP - -/***DSP Control Register***/ -#define INCA_IP_MBC_DCTRL ((volatile u32*)(INCA_IP_MBC+ 0x00A0)) -#define INCA_IP_MBC_DCTRL_BA (1 << 0) -#define INCA_IP_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1) -#define INCA_IP_MBC_DCTRL_IDL (1 << 4) -#define INCA_IP_MBC_DCTRL_RES (1 << 15) - -/***DSP Status Register***/ -#define INCA_IP_MBC_DSTA ((volatile u32*)(INCA_IP_MBC+ 0x00A4)) -#define INCA_IP_MBC_DSTA_IDLE (1 << 0) -#define INCA_IP_MBC_DSTA_PD (1 << 1) - -/***DSP Test 1 Register***/ -#define INCA_IP_MBC_DTST1 ((volatile u32*)(INCA_IP_MBC+ 0x00A8)) -#define INCA_IP_MBC_DTST1_ABORT (1 << 0) -#define INCA_IP_MBC_DTST1_HWF32 (1 << 1) -#define INCA_IP_MBC_DTST1_HWF4M (1 << 2) -#define INCA_IP_MBC_DTST1_HWFOP (1 << 3) - -/***********************************************************************/ -/* Module : Switch register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Switch (0xBF104000) -/***********************************************************************/ - - -/***Unknown Destination Register***/ -#define INCA_IP_Switch_UN_DEST ((volatile u32*)(INCA_IP_Switch+ 0x0000)) -#define INCA_IP_Switch_UN_DEST_CB (1 << 8) -#define INCA_IP_Switch_UN_DEST_LB (1 << 7) -#define INCA_IP_Switch_UN_DEST_PB (1 << 6) -#define INCA_IP_Switch_UN_DEST_CM (1 << 5) -#define INCA_IP_Switch_UN_DEST_LM (1 << 4) -#define INCA_IP_Switch_UN_DEST_PM (1 << 3) -#define INCA_IP_Switch_UN_DEST_CU (1 << 2) -#define INCA_IP_Switch_UN_DEST_LU (1 << 1) -#define INCA_IP_Switch_UN_DEST_PU (1 << 0) - -/***VLAN Control Register***/ -#define INCA_IP_Switch_VLAN_CTRL ((volatile u32*)(INCA_IP_Switch+ 0x0004)) -#define INCA_IP_Switch_VLAN_CTRL_SC (1 << 6) -#define INCA_IP_Switch_VLAN_CTRL_SL (1 << 5) -#define INCA_IP_Switch_VLAN_CTRL_SP (1 << 4) -#define INCA_IP_Switch_VLAN_CTRL_TC (1 << 3) -#define INCA_IP_Switch_VLAN_CTRL_TL (1 << 2) -#define INCA_IP_Switch_VLAN_CTRL_TP (1 << 1) -#define INCA_IP_Switch_VLAN_CTRL_VA (1 << 0) - -/***PC VLAN Configuration Register***/ -#define INCA_IP_Switch_PC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0008)) -#define INCA_IP_Switch_PC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***LAN VLAN Configuration Register***/ -#define INCA_IP_Switch_LAN_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x000C)) -#define INCA_IP_Switch_LAN_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***CPU VLAN Configuration Register***/ -#define INCA_IP_Switch_CPU_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0010)) -#define INCA_IP_Switch_CPU_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***Priority CoS Mapping Register***/ -#define INCA_IP_Switch_PRI_CoS ((volatile u32*)(INCA_IP_Switch+ 0x0014)) -#define INCA_IP_Switch_PRI_CoS_P7 (1 << 7) -#define INCA_IP_Switch_PRI_CoS_P6 (1 << 6) -#define INCA_IP_Switch_PRI_CoS_P5 (1 << 5) -#define INCA_IP_Switch_PRI_CoS_P4 (1 << 4) -#define INCA_IP_Switch_PRI_CoS_P3 (1 << 3) -#define INCA_IP_Switch_PRI_CoS_P2 (1 << 2) -#define INCA_IP_Switch_PRI_CoS_P1 (1 << 1) -#define INCA_IP_Switch_PRI_CoS_P0 (1 << 0) - -/***Spanning Tree Port Status Register***/ -#define INCA_IP_Switch_ST_PT ((volatile u32*)(INCA_IP_Switch+ 0x0018)) -#define INCA_IP_Switch_ST_PT_CPS (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_Switch_ST_PT_LPS (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_Switch_ST_PT_PPS (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***ARL Control Register***/ -#define INCA_IP_Switch_ARL_CTL ((volatile u32*)(INCA_IP_Switch+ 0x001C)) -#define INCA_IP_Switch_ARL_CTL_CHCC (1 << 15) -#define INCA_IP_Switch_ARL_CTL_CHCL (1 << 14) -#define INCA_IP_Switch_ARL_CTL_CHCP (1 << 13) -#define INCA_IP_Switch_ARL_CTL_CC (1 << 12) -#define INCA_IP_Switch_ARL_CTL_CL (1 << 11) -#define INCA_IP_Switch_ARL_CTL_CP (1 << 10) -#define INCA_IP_Switch_ARL_CTL_CG (1 << 9) -#define INCA_IP_Switch_ARL_CTL_PS (1 << 8) -#define INCA_IP_Switch_ARL_CTL_MRO (1 << 7) -#define INCA_IP_Switch_ARL_CTL_SRC (1 << 6) -#define INCA_IP_Switch_ARL_CTL_ATS (1 << 5) -#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_ARL_CTL_MAF (1 << 1) -#define INCA_IP_Switch_ARL_CTL_ENL (1 << 0) -#define INCA_IP_Switch_ARL_CTL_Res (value) (((( 1 << 19) - 1) & (value)) << 13) - -/***CPU Access Control Register***/ -#define INCA_IP_Switch_CPU_ACTL ((volatile u32*)(INCA_IP_Switch+ 0x0020)) -#define INCA_IP_Switch_CPU_ACTL_RA (1 << 31) -#define INCA_IP_Switch_CPU_ACTL_RW (1 << 30) -#define INCA_IP_Switch_CPU_ACTL_Res (value) (((( 1 << 21) - 1) & (value)) << 9) -#define INCA_IP_Switch_CPU_ACTL_AVA (1 << 8) -#define INCA_IP_Switch_CPU_ACTL_IDX (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***CPU Access Data Register 1***/ -#define INCA_IP_Switch_DATA1 ((volatile u32*)(INCA_IP_Switch+ 0x0024)) -#define INCA_IP_Switch_DATA1_Data (value) (((( 1 << 24) - 1) & (value)) << 0) - -/***CPU Access Data Register 2***/ -#define INCA_IP_Switch_DATA2 ((volatile u32*)(INCA_IP_Switch+ 0x0028)) -#define INCA_IP_Switch_DATA2_Data - -/***CPU Port Control Register***/ -#define INCA_IP_Switch_CPU_PCTL ((volatile u32*)(INCA_IP_Switch+ 0x002C)) -#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value) (((( 1 << 3) - 1) & (value)) << 11) -#define INCA_IP_Switch_CPU_PCTL_DAC (1 << 10) -#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value) (((( 1 << 3) - 1) & (value)) << 7) -#define INCA_IP_Switch_CPU_PCTL_MAM (1 << 6) -#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_Switch_CPU_PCTL_MAC (1 << 2) -#define INCA_IP_Switch_CPU_PCTL_EML (1 << 1) -#define INCA_IP_Switch_CPU_PCTL_EDL (1 << 0) -#define INCA_IP_Switch_CPU_PCTL_Res (value) (((( 1 << 18) - 1) & (value)) << 14) - -/***DSCP CoS Mapping Register 1***/ -#define INCA_IP_Switch_DSCP_COS1 ((volatile u32*)(INCA_IP_Switch+ 0x0030)) -#define INCA_IP_Switch_DSCP_COS1_DSCP - -/***DSCP CoS Mapping Register 1***/ -#define INCA_IP_Switch_DSCP_COS2 ((volatile u32*)(INCA_IP_Switch+ 0x0034)) -#define INCA_IP_Switch_DSCP_COS2_DSCP - -/***PC WFQ Control Register***/ -#define INCA_IP_Switch_PC_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0080)) -#define INCA_IP_Switch_PC_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_PC_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***PC TX Control Register***/ -#define INCA_IP_Switch_PC_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0084)) -#define INCA_IP_Switch_PC_TX_CTL_ELR (1 << 1) -#define INCA_IP_Switch_PC_TX_CTL_EER (1 << 0) - -/***LAN WFQ Control Register***/ -#define INCA_IP_Switch_LAN_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0100)) -#define INCA_IP_Switch_LAN_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_LAN_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***LAN TX Control Register***/ -#define INCA_IP_Switch_LAN_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0104)) -#define INCA_IP_Switch_LAN_TX_CTL_ELR (1 << 1) -#define INCA_IP_Switch_LAN_TX_CTL_EER (1 << 0) - -/***CPU WFQ Control Register***/ -#define INCA_IP_Switch_CPU_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0180)) -#define INCA_IP_Switch_CPU_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_CPU_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***PM PC RX Watermark Register***/ -#define INCA_IP_Switch_PC_WM ((volatile u32*)(INCA_IP_Switch+ 0x0200)) -#define INCA_IP_Switch_PC_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_PC_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_PC_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_PC_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM LAN RX Watermark Register***/ -#define INCA_IP_Switch_LAN_WM ((volatile u32*)(INCA_IP_Switch+ 0x0204)) -#define INCA_IP_Switch_LAN_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_LAN_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_LAN_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_LAN_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM CPU RX Watermark Register***/ -#define INCA_IP_Switch_CPU_WM ((volatile u32*)(INCA_IP_Switch+ 0x0208)) -#define INCA_IP_Switch_CPU_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_CPU_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_CPU_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_CPU_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM CPU RX Watermark Register***/ -#define INCA_IP_Switch_GBL_WM ((volatile u32*)(INCA_IP_Switch+ 0x020C)) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM Control Register***/ -#define INCA_IP_Switch_PM_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0210)) -#define INCA_IP_Switch_PM_CTL_GDN (1 << 3) -#define INCA_IP_Switch_PM_CTL_CDN (1 << 2) -#define INCA_IP_Switch_PM_CTL_LDN (1 << 1) -#define INCA_IP_Switch_PM_CTL_PDN (1 << 0) - -/***PM Header Control Register***/ -#define INCA_IP_Switch_PMAC_HD_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0280)) -#define INCA_IP_Switch_PMAC_HD_CTL_RL2 (1 << 21) -#define INCA_IP_Switch_PMAC_HD_CTL_RC (1 << 20) -#define INCA_IP_Switch_PMAC_HD_CTL_CM (1 << 19) -#define INCA_IP_Switch_PMAC_HD_CTL_CV (1 << 18) -#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value) (((( 1 << 16) - 1) & (value)) << 2) -#define INCA_IP_Switch_PMAC_HD_CTL_TAG (1 << 1) -#define INCA_IP_Switch_PMAC_HD_CTL_ADD (1 << 0) - -/***PM Source Address Register 1***/ -#define INCA_IP_Switch_PMAC_SA1 ((volatile u32*)(INCA_IP_Switch+ 0x0284)) -#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***PM Source Address Register 2***/ -#define INCA_IP_Switch_PMAC_SA2 ((volatile u32*)(INCA_IP_Switch+ 0x0288)) -#define INCA_IP_Switch_PMAC_SA2_SA_31_0 - -/***PM Dest Address Register 1***/ -#define INCA_IP_Switch_PMAC_DA1 ((volatile u32*)(INCA_IP_Switch+ 0x028C)) -#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***PM Dest Address Register 2***/ -#define INCA_IP_Switch_PMAC_DA2 ((volatile u32*)(INCA_IP_Switch+ 0x0290)) -#define INCA_IP_Switch_PMAC_DA2_DA_31_0 - -/***PM VLAN Register***/ -#define INCA_IP_Switch_PMAC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0294)) -#define INCA_IP_Switch_PMAC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 13) -#define INCA_IP_Switch_PMAC_VLAN_CFI (1 << 12) -#define INCA_IP_Switch_PMAC_VLAN_VLANID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***PM TX IPG Counter Register***/ -#define INCA_IP_Switch_PMAC_TX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x0298)) -#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM RX IPG Counter Register***/ -#define INCA_IP_Switch_PMAC_RX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x029C)) -#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Mirror Register***/ -#define INCA_IP_Switch_MRR ((volatile u32*)(INCA_IP_Switch+ 0x0300)) -#define INCA_IP_Switch_MRR_MRR (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_Switch_MRR_EC (1 << 5) -#define INCA_IP_Switch_MRR_EL (1 << 4) -#define INCA_IP_Switch_MRR_EP (1 << 3) -#define INCA_IP_Switch_MRR_IC (1 << 2) -#define INCA_IP_Switch_MRR_IL (1 << 1) -#define INCA_IP_Switch_MRR_IP (1 << 0) - -/***Packet Length Register***/ -#define INCA_IP_Switch_PKT_LEN ((volatile u32*)(INCA_IP_Switch+ 0x0304)) -#define INCA_IP_Switch_PKT_LEN_ADD (1 << 11) -#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value) (((( 1 << 11) - 1) & (value)) << 0) - -/***MDIO Access Register***/ -#define INCA_IP_Switch_MDIO_ACC ((volatile u32*)(INCA_IP_Switch+ 0x0480)) -#define INCA_IP_Switch_MDIO_ACC_RA (1 << 31) -#define INCA_IP_Switch_MDIO_ACC_RW (1 << 30) -#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value) (((( 1 << 5) - 1) & (value)) << 21) -#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value) (((( 1 << 5) - 1) & (value)) << 16) -#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Ethernet PHY Register***/ -#define INCA_IP_Switch_EPHY ((volatile u32*)(INCA_IP_Switch+ 0x0484)) -#define INCA_IP_Switch_EPHY_SL (1 << 7) -#define INCA_IP_Switch_EPHY_SP (1 << 6) -#define INCA_IP_Switch_EPHY_LL (1 << 5) -#define INCA_IP_Switch_EPHY_LP (1 << 4) -#define INCA_IP_Switch_EPHY_DL (1 << 3) -#define INCA_IP_Switch_EPHY_DP (1 << 2) -#define INCA_IP_Switch_EPHY_PL (1 << 1) -#define INCA_IP_Switch_EPHY_PP (1 << 0) - -/***Pause Write Enable Register***/ -#define INCA_IP_Switch_PWR_EN ((volatile u32*)(INCA_IP_Switch+ 0x0488)) -#define INCA_IP_Switch_PWR_EN_PL (1 << 1) -#define INCA_IP_Switch_PWR_EN_PP (1 << 0) - -/***MDIO Configuration Register***/ -#define INCA_IP_Switch_MDIO_CFG ((volatile u32*)(INCA_IP_Switch+ 0x048C)) -#define INCA_IP_Switch_MDIO_CFG_MDS (value) (((( 1 << 2) - 1) & (value)) << 14) -#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value) (((( 1 << 5) - 1) & (value)) << 9) -#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value) (((( 1 << 5) - 1) & (value)) << 4) -#define INCA_IP_Switch_MDIO_CFG_UEP (1 << 3) -#define INCA_IP_Switch_MDIO_CFG_PS (1 << 2) -#define INCA_IP_Switch_MDIO_CFG_PT (1 << 1) -#define INCA_IP_Switch_MDIO_CFG_UMM (1 << 0) - -/***Clock Configuration Register***/ -#define INCA_IP_Switch_CLK_CFG ((volatile u32*)(INCA_IP_Switch+ 0x0500)) -#define INCA_IP_Switch_CLK_CFG_ARL_ID (1 << 9) -#define INCA_IP_Switch_CLK_CFG_CPU_ID (1 << 8) -#define INCA_IP_Switch_CLK_CFG_LAN_ID (1 << 7) -#define INCA_IP_Switch_CLK_CFG_PC_ID (1 << 6) -#define INCA_IP_Switch_CLK_CFG_SE_ID (1 << 5) - -/***********************************************************************/ -/* Module : SSC1 register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SSC1 (0xB8000500) -/***********************************************************************/ - - -/***Control Register (Programming Mode)***/ -#define INCA_IP_SSC1_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) -#define INCA_IP_SSC1_SCC_CON_PRG_EN (1 << 15) -#define INCA_IP_SSC1_SCC_CON_PRG_MS (1 << 14) -#define INCA_IP_SSC1_SCC_CON_PRG_AREN (1 << 12) -#define INCA_IP_SSC1_SCC_CON_PRG_BEN (1 << 11) -#define INCA_IP_SSC1_SCC_CON_PRG_PEN (1 << 10) -#define INCA_IP_SSC1_SCC_CON_PRG_REN (1 << 9) -#define INCA_IP_SSC1_SCC_CON_PRG_TEN (1 << 8) -#define INCA_IP_SSC1_SCC_CON_PRG_LB (1 << 7) -#define INCA_IP_SSC1_SCC_CON_PRG_PO (1 << 6) -#define INCA_IP_SSC1_SCC_CON_PRG_PH (1 << 5) -#define INCA_IP_SSC1_SCC_CON_PRG_HB (1 << 4) -#define INCA_IP_SSC1_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SCC Control Register (Operating Mode)***/ -#define INCA_IP_SSC1_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) -#define INCA_IP_SSC1_SCC_CON_OPR_EN (1 << 15) -#define INCA_IP_SSC1_SCC_CON_OPR_MS (1 << 14) -#define INCA_IP_SSC1_SCC_CON_OPR_BSY (1 << 12) -#define INCA_IP_SSC1_SCC_CON_OPR_BE (1 << 11) -#define INCA_IP_SSC1_SCC_CON_OPR_PE (1 << 10) -#define INCA_IP_SSC1_SCC_CON_OPR_RE (1 << 9) -#define INCA_IP_SSC1_SCC_CON_OPR_TE (1 << 8) -#define INCA_IP_SSC1_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SSC Write Hardware Modified Control Register***/ -#define INCA_IP_SSC1_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC1+ 0x0040)) -#define INCA_IP_SSC1_SSC_WHBCON_SETBE (1 << 15) -#define INCA_IP_SSC1_SSC_WHBCON_SETPE (1 << 14) -#define INCA_IP_SSC1_SSC_WHBCON_SETRE (1 << 13) -#define INCA_IP_SSC1_SSC_WHBCON_SETTE (1 << 12) -#define INCA_IP_SSC1_SSC_WHBCON_CLRBE (1 << 11) -#define INCA_IP_SSC1_SSC_WHBCON_CLRPE (1 << 10) -#define INCA_IP_SSC1_SSC_WHBCON_CLRRE (1 << 9) -#define INCA_IP_SSC1_SSC_WHBCON_CLRTE (1 << 8) - -/***SSC Baudrate Timer Reload Register***/ -#define INCA_IP_SSC1_SSC_BR ((volatile u32*)(INCA_IP_SSC1+ 0x0014)) -#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Transmitter Buffer Register***/ -#define INCA_IP_SSC1_SSC_TB ((volatile u32*)(INCA_IP_SSC1+ 0x0020)) -#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receiver Buffer Register***/ -#define INCA_IP_SSC1_SSC_RB ((volatile u32*)(INCA_IP_SSC1+ 0x0024)) -#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receive FIFO Control Register***/ -#define INCA_IP_SSC1_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0030)) -#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_SSC1_SSC_RXFCON_RXFLU (1 << 1) -#define INCA_IP_SSC1_SSC_RXFCON_RXFEN (1 << 0) - -/***SSC Transmit FIFO Control Register***/ -#define INCA_IP_SSC1_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0034)) -#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_SSC1_SSC_TXFCON_TXFLU (1 << 1) -#define INCA_IP_SSC1_SSC_TXFCON_TXFEN (1 << 0) - -/***SSC FIFO Status Register***/ -#define INCA_IP_SSC1_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC1+ 0x0038)) -#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***SSC Clock Control Register***/ -#define INCA_IP_SSC1_SSC_CLC ((volatile u32*)(INCA_IP_SSC1+ 0x0000)) -#define INCA_IP_SSC1_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_CLC_DISS (1 << 1) -#define INCA_IP_SSC1_SSC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : SSC2 register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SSC2 (0xB8000600) -/***********************************************************************/ - - -/***Control Register (Programming Mode)***/ -#define INCA_IP_SSC2_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) -#define INCA_IP_SSC2_SCC_CON_PRG_EN (1 << 15) -#define INCA_IP_SSC2_SCC_CON_PRG_MS (1 << 14) -#define INCA_IP_SSC2_SCC_CON_PRG_AREN (1 << 12) -#define INCA_IP_SSC2_SCC_CON_PRG_BEN (1 << 11) -#define INCA_IP_SSC2_SCC_CON_PRG_PEN (1 << 10) -#define INCA_IP_SSC2_SCC_CON_PRG_REN (1 << 9) -#define INCA_IP_SSC2_SCC_CON_PRG_TEN (1 << 8) -#define INCA_IP_SSC2_SCC_CON_PRG_LB (1 << 7) -#define INCA_IP_SSC2_SCC_CON_PRG_PO (1 << 6) -#define INCA_IP_SSC2_SCC_CON_PRG_PH (1 << 5) -#define INCA_IP_SSC2_SCC_CON_PRG_HB (1 << 4) -#define INCA_IP_SSC2_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SCC Control Register (Operating Mode)***/ -#define INCA_IP_SSC2_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) -#define INCA_IP_SSC2_SCC_CON_OPR_EN (1 << 15) -#define INCA_IP_SSC2_SCC_CON_OPR_MS (1 << 14) -#define INCA_IP_SSC2_SCC_CON_OPR_BSY (1 << 12) -#define INCA_IP_SSC2_SCC_CON_OPR_BE (1 << 11) -#define INCA_IP_SSC2_SCC_CON_OPR_PE (1 << 10) -#define INCA_IP_SSC2_SCC_CON_OPR_RE (1 << 9) -#define INCA_IP_SSC2_SCC_CON_OPR_TE (1 << 8) -#define INCA_IP_SSC2_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SSC Write Hardware Modified Control Register***/ -#define INCA_IP_SSC2_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC2+ 0x0040)) -#define INCA_IP_SSC2_SSC_WHBCON_SETBE (1 << 15) -#define INCA_IP_SSC2_SSC_WHBCON_SETPE (1 << 14) -#define INCA_IP_SSC2_SSC_WHBCON_SETRE (1 << 13) -#define INCA_IP_SSC2_SSC_WHBCON_SETTE (1 << 12) -#define INCA_IP_SSC2_SSC_WHBCON_CLRBE (1 << 11) -#define INCA_IP_SSC2_SSC_WHBCON_CLRPE (1 << 10) -#define INCA_IP_SSC2_SSC_WHBCON_CLRRE (1 << 9) -#define INCA_IP_SSC2_SSC_WHBCON_CLRTE (1 << 8) - -/***SSC Baudrate Timer Reload Register***/ -#define INCA_IP_SSC2_SSC_BR ((volatile u32*)(INCA_IP_SSC2+ 0x0014)) -#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Transmitter Buffer Register***/ -#define INCA_IP_SSC2_SSC_TB ((volatile u32*)(INCA_IP_SSC2+ 0x0020)) -#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receiver Buffer Register***/ -#define INCA_IP_SSC2_SSC_RB ((volatile u32*)(INCA_IP_SSC2+ 0x0024)) -#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receive FIFO Control Register***/ -#define INCA_IP_SSC2_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0030)) -#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_SSC2_SSC_RXFCON_RXFLU (1 << 1) -#define INCA_IP_SSC2_SSC_RXFCON_RXFEN (1 << 0) - -/***SSC Transmit FIFO Control Register***/ -#define INCA_IP_SSC2_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0034)) -#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_SSC2_SSC_TXFCON_TXFLU (1 << 1) -#define INCA_IP_SSC2_SSC_TXFCON_TXFEN (1 << 0) - -/***SSC FIFO Status Register***/ -#define INCA_IP_SSC2_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC2+ 0x0038)) -#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***SSC Clock Control Register***/ -#define INCA_IP_SSC2_SSC_CLC ((volatile u32*)(INCA_IP_SSC2+ 0x0000)) -#define INCA_IP_SSC2_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_CLC_DISS (1 << 1) -#define INCA_IP_SSC2_SSC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : EBU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_EBU (0xB8000200) -/***********************************************************************/ - - -/***EBU Clock Control Register***/ -#define INCA_IP_EBU_EBU_CLC ((volatile u32*)(INCA_IP_EBU+ 0x0000)) -#define INCA_IP_EBU_EBU_CLC_DISS (1 << 1) -#define INCA_IP_EBU_EBU_CLC_DISR (1 << 0) - -/***EBU Global Control Register***/ -#define INCA_IP_EBU_EBU_CON ((volatile u32*)(INCA_IP_EBU+ 0x0010)) -#define INCA_IP_EBU_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_EBU_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_CON_ARBSYNC (1 << 5) -#define INCA_IP_EBU_EBU_CON_1 (1 << 3) - -/***EBU Address Select Register 0***/ -#define INCA_IP_EBU_EBU_ADDSEL0 ((volatile u32*)(INCA_IP_EBU+ 0x0020)) -#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL0_REGEN (1 << 0) - -/***EBU Address Select Register 1***/ -#define INCA_IP_EBU_EBU_ADDSEL1 ((volatile u32*)(INCA_IP_EBU+ 0x0024)) -#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL1_REGEN (1 << 0) - -/***EBU Address Select Register 2***/ -#define INCA_IP_EBU_EBU_ADDSEL2 ((volatile u32*)(INCA_IP_EBU+ 0x0028)) -#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL2_REGEN (1 << 0) - -/***EBU Bus Configuration Register 0***/ -#define INCA_IP_EBU_EBU_BUSCON0 ((volatile u32*)(INCA_IP_EBU+ 0x0060)) -#define INCA_IP_EBU_EBU_BUSCON0_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON0_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON0_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 1***/ -#define INCA_IP_EBU_EBU_BUSCON1 ((volatile u32*)(INCA_IP_EBU+ 0x0064)) -#define INCA_IP_EBU_EBU_BUSCON1_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON1_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON1_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 2***/ -#define INCA_IP_EBU_EBU_BUSCON2 ((volatile u32*)(INCA_IP_EBU+ 0x0068)) -#define INCA_IP_EBU_EBU_BUSCON2_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON2_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON2_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : SDRAM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SDRAM (0xBF800000) -/***********************************************************************/ - - -/***MC Access Error Cause Register***/ -#define INCA_IP_SDRAM_MC_ERRCAUSE ((volatile u32*)(INCA_IP_SDRAM+ 0x0100)) -#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***MC Access Error Address Register***/ -#define INCA_IP_SDRAM_MC_ERRADDR ((volatile u32*)(INCA_IP_SDRAM+ 0x0108)) -#define INCA_IP_SDRAM_MC_ERRADDR_ADDR - -/***MC I/O General Purpose Register***/ -#define INCA_IP_SDRAM_MC_IOGP ((volatile u32*)(INCA_IP_SDRAM+ 0x0800)) -#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28) -#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24) -#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20) -#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_IOGP_CPS (1 << 11) -#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***MC Self Refresh Register***/ -#define INCA_IP_SDRAM_MC_SELFRFSH ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00)) -#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS (1 << 1) -#define INCA_IP_SDRAM_MC_SELFRFSH_PWD (1 << 0) -#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2) - -/***MC Enable Register***/ -#define INCA_IP_SDRAM_MC_CTRLENA ((volatile u32*)(INCA_IP_SDRAM+ 0x1000)) -#define INCA_IP_SDRAM_MC_CTRLENA_ENA (1 << 0) -#define INCA_IP_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1) - -/***MC Mode Register Setup Code***/ -#define INCA_IP_SDRAM_MC_MRSCODE ((volatile u32*)(INCA_IP_SDRAM+ 0x1008)) -#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7) -#define INCA_IP_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_MRSCODE_WT (1 << 3) -#define INCA_IP_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***MC Configuration Data-word Width Register***/ -#define INCA_IP_SDRAM_MC_CFGDW ((volatile u32*)(INCA_IP_SDRAM+ 0x1010)) -#define INCA_IP_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4) - -/***MC Configuration Physical Bank 0 Register***/ -#define INCA_IP_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP_SDRAM+ 0x1018)) -#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16) - -/***MC Latency Register***/ -#define INCA_IP_SDRAM_MC_LATENCY ((volatile u32*)(INCA_IP_SDRAM+ 0x1038)) -#define INCA_IP_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20) - -/***MC Refresh Cycle Time Register***/ -#define INCA_IP_SDRAM_MC_TREFRESH ((volatile u32*)(INCA_IP_SDRAM+ 0x1040)) -#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13) - -/***********************************************************************/ -/* Module : GPTU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_GPTU (0xB8000300) -/***********************************************************************/ - - -/***GPT Clock Control Register***/ -#define INCA_IP_GPTU_GPT_CLC ((volatile u32*)(INCA_IP_GPTU+ 0x0000)) -#define INCA_IP_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_GPTU_GPT_CLC_DISS (1 << 1) -#define INCA_IP_GPTU_GPT_CLC_DISR (1 << 0) - -/***GPT Timer 3 Control Register***/ -#define INCA_IP_GPTU_GPT_T3CON ((volatile u32*)(INCA_IP_GPTU+ 0x0014)) -#define INCA_IP_GPTU_GPT_T3CON_T3RDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T3CON_T3EDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define INCA_IP_GPTU_GPT_T3CON_T3OTL (1 << 10) -#define INCA_IP_GPTU_GPT_T3CON_T3UD (1 << 7) -#define INCA_IP_GPTU_GPT_T3CON_T3R (1 << 6) -#define INCA_IP_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write Hardware Modified Timer 3 Control Register -If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT3CON ((volatile u32*)(INCA_IP_GPTU+ 0x004C)) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10) - -/***GPT Timer 2 Control Register***/ -#define INCA_IP_GPTU_GPT_T2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0010)) -#define INCA_IP_GPTU_GPT_T2CON_TxRDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T2CON_TxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS (1 << 12) -#define INCA_IP_GPTU_GPT_T2CON_TxRC (1 << 9) -#define INCA_IP_GPTU_GPT_T2CON_TxUD (1 << 7) -#define INCA_IP_GPTU_GPT_T2CON_TxR (1 << 6) -#define INCA_IP_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Timer 4 Control Register***/ -#define INCA_IP_GPTU_GPT_T4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0018)) -#define INCA_IP_GPTU_GPT_T4CON_TxRDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T4CON_TxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS (1 << 12) -#define INCA_IP_GPTU_GPT_T4CON_TxRC (1 << 9) -#define INCA_IP_GPTU_GPT_T4CON_TxUD (1 << 7) -#define INCA_IP_GPTU_GPT_T4CON_TxR (1 << 6) -#define INCA_IP_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 2 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0048)) -#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12) - -/***GPT Write HW Modified Timer 4 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0050)) -#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12) - -/***GPT Capture Reload Register***/ -#define INCA_IP_GPTU_GPT_CAPREL ((volatile u32*)(INCA_IP_GPTU+ 0x0030)) -#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 2 Register***/ -#define INCA_IP_GPTU_GPT_T2 ((volatile u32*)(INCA_IP_GPTU+ 0x0034)) -#define INCA_IP_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 3 Register***/ -#define INCA_IP_GPTU_GPT_T3 ((volatile u32*)(INCA_IP_GPTU+ 0x0038)) -#define INCA_IP_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 4 Register***/ -#define INCA_IP_GPTU_GPT_T4 ((volatile u32*)(INCA_IP_GPTU+ 0x003C)) -#define INCA_IP_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 5 Register***/ -#define INCA_IP_GPTU_GPT_T5 ((volatile u32*)(INCA_IP_GPTU+ 0x0040)) -#define INCA_IP_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Register***/ -#define INCA_IP_GPTU_GPT_T6 ((volatile u32*)(INCA_IP_GPTU+ 0x0044)) -#define INCA_IP_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Control Register***/ -#define INCA_IP_GPTU_GPT_T6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0020)) -#define INCA_IP_GPTU_GPT_T6CON_T6SR (1 << 15) -#define INCA_IP_GPTU_GPT_T6CON_T6CLR (1 << 14) -#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define INCA_IP_GPTU_GPT_T6CON_T6OTL (1 << 10) -#define INCA_IP_GPTU_GPT_T6CON_T6UD (1 << 7) -#define INCA_IP_GPTU_GPT_T6CON_T6R (1 << 6) -#define INCA_IP_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 6 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0054)) -#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11) -#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10) - -/***GPT Timer 5 Control Register***/ -#define INCA_IP_GPTU_GPT_T5CON ((volatile u32*)(INCA_IP_GPTU+ 0x001C)) -#define INCA_IP_GPTU_GPT_T5CON_T5SC (1 << 15) -#define INCA_IP_GPTU_GPT_T5CON_T5CLR (1 << 14) -#define INCA_IP_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12) -#define INCA_IP_GPTU_GPT_T5CON_T5CC (1 << 11) -#define INCA_IP_GPTU_GPT_T5CON_CT3 (1 << 10) -#define INCA_IP_GPTU_GPT_T5CON_T5RC (1 << 9) -#define INCA_IP_GPTU_GPT_T5CON_T5UDE (1 << 8) -#define INCA_IP_GPTU_GPT_T5CON_T5UD (1 << 7) -#define INCA_IP_GPTU_GPT_T5CON_T5R (1 << 6) -#define INCA_IP_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : IOM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_IOM (0xBF105000) -/***********************************************************************/ - - -/***Receive FIFO***/ -#define INCA_IP_IOM_RFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) -#define INCA_IP_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Transmit FIFO***/ -#define INCA_IP_IOM_XFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) -#define INCA_IP_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Interrupt Status Register HDLC***/ -#define INCA_IP_IOM_ISTAH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) -#define INCA_IP_IOM_ISTAH_RME (1 << 7) -#define INCA_IP_IOM_ISTAH_RPF (1 << 6) -#define INCA_IP_IOM_ISTAH_RFO (1 << 5) -#define INCA_IP_IOM_ISTAH_XPR (1 << 4) -#define INCA_IP_IOM_ISTAH_XMR (1 << 3) -#define INCA_IP_IOM_ISTAH_XDU (1 << 2) - -/***Interrupt Mask Register HDLC***/ -#define INCA_IP_IOM_MASKH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) -#define INCA_IP_IOM_MASKH_RME (1 << 7) -#define INCA_IP_IOM_MASKH_RPF (1 << 6) -#define INCA_IP_IOM_MASKH_RFO (1 << 5) -#define INCA_IP_IOM_MASKH_XPR (1 << 4) -#define INCA_IP_IOM_MASKH_XMR (1 << 3) -#define INCA_IP_IOM_MASKH_XDU (1 << 2) - -/***Status Register***/ -#define INCA_IP_IOM_STAR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) -#define INCA_IP_IOM_STAR_XDOV (1 << 7) -#define INCA_IP_IOM_STAR_XFW (1 << 6) -#define INCA_IP_IOM_STAR_RACI (1 << 3) -#define INCA_IP_IOM_STAR_XACI (1 << 1) - -/***Command Register***/ -#define INCA_IP_IOM_CMDR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) -#define INCA_IP_IOM_CMDR_RMC (1 << 7) -#define INCA_IP_IOM_CMDR_RRES (1 << 6) -#define INCA_IP_IOM_CMDR_XTF (1 << 3) -#define INCA_IP_IOM_CMDR_XME (1 << 1) -#define INCA_IP_IOM_CMDR_XRES (1 << 0) - -/***Mode Register***/ -#define INCA_IP_IOM_MODEH ((volatile u32*)(INCA_IP_IOM+ 0x0088)) -#define INCA_IP_IOM_MODEH_MDS2 (1 << 7) -#define INCA_IP_IOM_MODEH_MDS1 (1 << 6) -#define INCA_IP_IOM_MODEH_MDS0 (1 << 5) -#define INCA_IP_IOM_MODEH_RAC (1 << 3) -#define INCA_IP_IOM_MODEH_DIM2 (1 << 2) -#define INCA_IP_IOM_MODEH_DIM1 (1 << 1) -#define INCA_IP_IOM_MODEH_DIM0 (1 << 0) - -/***Extended Mode Register***/ -#define INCA_IP_IOM_EXMR ((volatile u32*)(INCA_IP_IOM+ 0x008C)) -#define INCA_IP_IOM_EXMR_XFBS (1 << 7) -#define INCA_IP_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5) -#define INCA_IP_IOM_EXMR_SRA (1 << 4) -#define INCA_IP_IOM_EXMR_XCRC (1 << 3) -#define INCA_IP_IOM_EXMR_RCRC (1 << 2) -#define INCA_IP_IOM_EXMR_ITF (1 << 0) - -/***SAPI1 Register***/ -#define INCA_IP_IOM_SAP1 ((volatile u32*)(INCA_IP_IOM+ 0x0094)) -#define INCA_IP_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_SAP1_MHA (1 << 0) - -/***Receive Frame Byte Count Low***/ -#define INCA_IP_IOM_RBCL ((volatile u32*)(INCA_IP_IOM+ 0x0098)) -#define INCA_IP_IOM_RBCL_RBC(value) (1 << value) - - -/***SAPI2 Register***/ -#define INCA_IP_IOM_SAP2 ((volatile u32*)(INCA_IP_IOM+ 0x0098)) -#define INCA_IP_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_SAP2_MLA (1 << 0) - -/***Receive Frame Byte Count High***/ -#define INCA_IP_IOM_RBCH ((volatile u32*)(INCA_IP_IOM+ 0x009C)) -#define INCA_IP_IOM_RBCH_OV (1 << 4) -#define INCA_IP_IOM_RBCH_RBC11 (1 << 3) -#define INCA_IP_IOM_RBCH_RBC10 (1 << 2) -#define INCA_IP_IOM_RBCH_RBC9 (1 << 1) -#define INCA_IP_IOM_RBCH_RBC8 (1 << 0) - -/***TEI1 Register 1***/ -#define INCA_IP_IOM_TEI1 ((volatile u32*)(INCA_IP_IOM+ 0x009C)) -#define INCA_IP_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define INCA_IP_IOM_TEI1_EA (1 << 0) - -/***Receive Status Register***/ -#define INCA_IP_IOM_RSTA ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) -#define INCA_IP_IOM_RSTA_VFR (1 << 7) -#define INCA_IP_IOM_RSTA_RDO (1 << 6) -#define INCA_IP_IOM_RSTA_CRC (1 << 5) -#define INCA_IP_IOM_RSTA_RAB (1 << 4) -#define INCA_IP_IOM_RSTA_SA1 (1 << 3) -#define INCA_IP_IOM_RSTA_SA0 (1 << 2) -#define INCA_IP_IOM_RSTA_TA (1 << 0) -#define INCA_IP_IOM_RSTA_CR (1 << 1) - -/***TEI2 Register***/ -#define INCA_IP_IOM_TEI2 ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) -#define INCA_IP_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define INCA_IP_IOM_TEI2_EA (1 << 0) - -/***Test Mode Register HDLC***/ -#define INCA_IP_IOM_TMH ((volatile u32*)(INCA_IP_IOM+ 0x00A4)) -#define INCA_IP_IOM_TMH_TLP (1 << 0) - -/***Command/Indication Receive 0***/ -#define INCA_IP_IOM_CIR0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) -#define INCA_IP_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_IOM_CIR0_CIC0 (1 << 3) -#define INCA_IP_IOM_CIR0_CIC1 (1 << 2) -#define INCA_IP_IOM_CIR0_SG (1 << 1) -#define INCA_IP_IOM_CIR0_BAS (1 << 0) - -/***Command/Indication Transmit 0***/ -#define INCA_IP_IOM_CIX0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) -#define INCA_IP_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_IOM_CIX0_TBA2 (1 << 3) -#define INCA_IP_IOM_CIX0_TBA1 (1 << 2) -#define INCA_IP_IOM_CIX0_TBA0 (1 << 1) -#define INCA_IP_IOM_CIX0_BAC (1 << 0) - -/***Command/Indication Receive 1***/ -#define INCA_IP_IOM_CIR1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) -#define INCA_IP_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2) - -/***Command/Indication Transmit 1***/ -#define INCA_IP_IOM_CIX1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) -#define INCA_IP_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_CIX1_CICW (1 << 1) -#define INCA_IP_IOM_CIX1_CI1E (1 << 0) - -/***Controller Data Access Reg. (CH10)***/ -#define INCA_IP_IOM_CDA10 ((volatile u32*)(INCA_IP_IOM+ 0x0100)) -#define INCA_IP_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH11)***/ -#define INCA_IP_IOM_CDA11 ((volatile u32*)(INCA_IP_IOM+ 0x0104)) -#define INCA_IP_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH20)***/ -#define INCA_IP_IOM_CDA20 ((volatile u32*)(INCA_IP_IOM+ 0x0108)) -#define INCA_IP_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH21)***/ -#define INCA_IP_IOM_CDA21 ((volatile u32*)(INCA_IP_IOM+ 0x010C)) -#define INCA_IP_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define INCA_IP_IOM_CDA_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0110)) -#define INCA_IP_IOM_CDA_TSDP10_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define INCA_IP_IOM_CDA_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0114)) -#define INCA_IP_IOM_CDA_TSDP11_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define INCA_IP_IOM_CDA_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0118)) -#define INCA_IP_IOM_CDA_TSDP20_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define INCA_IP_IOM_CDA_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x011C)) -#define INCA_IP_IOM_CDA_TSDP21_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define INCA_IP_IOM_CO_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0120)) -#define INCA_IP_IOM_CO_TSDP10_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define INCA_IP_IOM_CO_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0124)) -#define INCA_IP_IOM_CO_TSDP11_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define INCA_IP_IOM_CO_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0128)) -#define INCA_IP_IOM_CO_TSDP20_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define INCA_IP_IOM_CO_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x012C)) -#define INCA_IP_IOM_CO_TSDP21_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define INCA_IP_IOM_CDA1_CR ((volatile u32*)(INCA_IP_IOM+ 0x0138)) -#define INCA_IP_IOM_CDA1_CR_EN_TBM (1 << 5) -#define INCA_IP_IOM_CDA1_CR_EN_I1 (1 << 4) -#define INCA_IP_IOM_CDA1_CR_EN_I0 (1 << 3) -#define INCA_IP_IOM_CDA1_CR_EN_O1 (1 << 2) -#define INCA_IP_IOM_CDA1_CR_EN_O0 (1 << 1) -#define INCA_IP_IOM_CDA1_CR_SWAP (1 << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define INCA_IP_IOM_CDA2_CR ((volatile u32*)(INCA_IP_IOM+ 0x013C)) -#define INCA_IP_IOM_CDA2_CR_EN_TBM (1 << 5) -#define INCA_IP_IOM_CDA2_CR_EN_I1 (1 << 4) -#define INCA_IP_IOM_CDA2_CR_EN_I0 (1 << 3) -#define INCA_IP_IOM_CDA2_CR_EN_O1 (1 << 2) -#define INCA_IP_IOM_CDA2_CR_EN_O0 (1 << 1) -#define INCA_IP_IOM_CDA2_CR_SWAP (1 << 0) - -/***Control Register B-Channel Data***/ -#define INCA_IP_IOM_BCHA_CR ((volatile u32*)(INCA_IP_IOM+ 0x0144)) -#define INCA_IP_IOM_BCHA_CR_EN_BC2 (1 << 4) -#define INCA_IP_IOM_BCHA_CR_EN_BC1 (1 << 3) - -/***Control Register B-Channel Data***/ -#define INCA_IP_IOM_BCHB_CR ((volatile u32*)(INCA_IP_IOM+ 0x0148)) -#define INCA_IP_IOM_BCHB_CR_EN_BC2 (1 << 4) -#define INCA_IP_IOM_BCHB_CR_EN_BC1 (1 << 3) - -/***Control Reg. for HDLC and CI1 Data***/ -#define INCA_IP_IOM_DCI_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) -#define INCA_IP_IOM_DCI_CR_DPS_CI1 (1 << 7) -#define INCA_IP_IOM_DCI_CR_EN_CI1 (1 << 6) -#define INCA_IP_IOM_DCI_CR_EN_D (1 << 5) - -/***Control Reg. for HDLC and CI1 Data***/ -#define INCA_IP_IOM_DCIC_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) -#define INCA_IP_IOM_DCIC_CR_DPS_CI0 (1 << 7) -#define INCA_IP_IOM_DCIC_CR_EN_CI0 (1 << 6) -#define INCA_IP_IOM_DCIC_CR_DPS_D (1 << 5) - -/***Control Reg. Serial Data Strobe x***/ -#define INCA_IP_IOM_SDS_CR ((volatile u32*)(INCA_IP_IOM+ 0x0154)) -#define INCA_IP_IOM_SDS_CR_ENS_TSS (1 << 7) -#define INCA_IP_IOM_SDS_CR_ENS_TSS_1 (1 << 6) -#define INCA_IP_IOM_SDS_CR_ENS_TSS_3 (1 << 5) -#define INCA_IP_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Control Register IOM Data***/ -#define INCA_IP_IOM_IOM_CR ((volatile u32*)(INCA_IP_IOM+ 0x015C)) -#define INCA_IP_IOM_IOM_CR_SPU (1 << 7) -#define INCA_IP_IOM_IOM_CR_CI_CS (1 << 5) -#define INCA_IP_IOM_IOM_CR_TIC_DIS (1 << 4) -#define INCA_IP_IOM_IOM_CR_EN_BCL (1 << 3) -#define INCA_IP_IOM_IOM_CR_CLKM (1 << 2) -#define INCA_IP_IOM_IOM_CR_Res (1 << 1) -#define INCA_IP_IOM_IOM_CR_DIS_IOM (1 << 0) - -/***Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_STI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) -#define INCA_IP_IOM_STI_STOV21 (1 << 7) -#define INCA_IP_IOM_STI_STOV20 (1 << 6) -#define INCA_IP_IOM_STI_STOV11 (1 << 5) -#define INCA_IP_IOM_STI_STOV10 (1 << 4) -#define INCA_IP_IOM_STI_STI21 (1 << 3) -#define INCA_IP_IOM_STI_STI20 (1 << 2) -#define INCA_IP_IOM_STI_STI11 (1 << 1) -#define INCA_IP_IOM_STI_STI10 (1 << 0) - -/***Acknowledge Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_ASTI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) -#define INCA_IP_IOM_ASTI_ACK21 (1 << 3) -#define INCA_IP_IOM_ASTI_ACK20 (1 << 2) -#define INCA_IP_IOM_ASTI_ACK11 (1 << 1) -#define INCA_IP_IOM_ASTI_ACK10 (1 << 0) - -/***Mask Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_MSTI ((volatile u32*)(INCA_IP_IOM+ 0x0164)) -#define INCA_IP_IOM_MSTI_STOV21 (1 << 7) -#define INCA_IP_IOM_MSTI_STOV20 (1 << 6) -#define INCA_IP_IOM_MSTI_STOV11 (1 << 5) -#define INCA_IP_IOM_MSTI_STOV10 (1 << 4) -#define INCA_IP_IOM_MSTI_STI21 (1 << 3) -#define INCA_IP_IOM_MSTI_STI20 (1 << 2) -#define INCA_IP_IOM_MSTI_STI11 (1 << 1) -#define INCA_IP_IOM_MSTI_STI10 (1 << 0) - -/***Configuration Register for Serial Data Strobes***/ -#define INCA_IP_IOM_SDS_CONF ((volatile u32*)(INCA_IP_IOM+ 0x0168)) -#define INCA_IP_IOM_SDS_CONF_SDS_BCL (1 << 0) - -/***Monitoring CDA Bits***/ -#define INCA_IP_IOM_MCDA ((volatile u32*)(INCA_IP_IOM+ 0x016C)) -#define INCA_IP_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : ASC register address and bits */ -/***********************************************************************/ - -#define INCA_IP_ASC (0xB8000400) -/***********************************************************************/ - - -/***ASC Port Input Select Register***/ -#define INCA_IP_ASC_ASC_PISEL ((volatile u32*)(INCA_IP_ASC+ 0x0004)) -#define INCA_IP_ASC_ASC_PISEL_RIS (1 << 0) - -/***ASC Control Register***/ -#define INCA_IP_ASC_ASC_CON ((volatile u32*)(INCA_IP_ASC+ 0x0010)) -#define INCA_IP_ASC_ASC_CON_R (1 << 15) -#define INCA_IP_ASC_ASC_CON_LB (1 << 14) -#define INCA_IP_ASC_ASC_CON_BRS (1 << 13) -#define INCA_IP_ASC_ASC_CON_ODD (1 << 12) -#define INCA_IP_ASC_ASC_CON_FDE (1 << 11) -#define INCA_IP_ASC_ASC_CON_OE (1 << 10) -#define INCA_IP_ASC_ASC_CON_FE (1 << 9) -#define INCA_IP_ASC_ASC_CON_PE (1 << 8) -#define INCA_IP_ASC_ASC_CON_OEN (1 << 7) -#define INCA_IP_ASC_ASC_CON_FEN (1 << 6) -#define INCA_IP_ASC_ASC_CON_PENRXDI (1 << 5) -#define INCA_IP_ASC_ASC_CON_REN (1 << 4) -#define INCA_IP_ASC_ASC_CON_STP (1 << 3) -#define INCA_IP_ASC_ASC_CON_M (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***ASC Write Hardware Modified Control Register***/ -#define INCA_IP_ASC_ASC_WHBCON ((volatile u32*)(INCA_IP_ASC+ 0x0050)) -#define INCA_IP_ASC_ASC_WHBCON_SETOE (1 << 13) -#define INCA_IP_ASC_ASC_WHBCON_SETFE (1 << 12) -#define INCA_IP_ASC_ASC_WHBCON_SETPE (1 << 11) -#define INCA_IP_ASC_ASC_WHBCON_CLROE (1 << 10) -#define INCA_IP_ASC_ASC_WHBCON_CLRFE (1 << 9) -#define INCA_IP_ASC_ASC_WHBCON_CLRPE (1 << 8) -#define INCA_IP_ASC_ASC_WHBCON_SETREN (1 << 5) -#define INCA_IP_ASC_ASC_WHBCON_CLRREN (1 << 4) - -/***ASC Baudrate Timer/Reload Register***/ -#define INCA_IP_ASC_ASC_BTR ((volatile u32*)(INCA_IP_ASC+ 0x0014)) -#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value) (((( 1 << 13) - 1) & (value)) << 0) - -/***ASC Fractional Divider Register***/ -#define INCA_IP_ASC_ASC_FDV ((volatile u32*)(INCA_IP_ASC+ 0x0018)) -#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC IrDA Pulse Mode/Width Register***/ -#define INCA_IP_ASC_ASC_PMW ((volatile u32*)(INCA_IP_ASC+ 0x001C)) -#define INCA_IP_ASC_ASC_PMW_IRPW (1 << 8) -#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***ASC Transmit Buffer Register***/ -#define INCA_IP_ASC_ASC_TBUF ((volatile u32*)(INCA_IP_ASC+ 0x0020)) -#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Receive Buffer Register***/ -#define INCA_IP_ASC_ASC_RBUF ((volatile u32*)(INCA_IP_ASC+ 0x0024)) -#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Autobaud Control Register***/ -#define INCA_IP_ASC_ASC_ABCON ((volatile u32*)(INCA_IP_ASC+ 0x0030)) -#define INCA_IP_ASC_ASC_ABCON_RXINV (1 << 11) -#define INCA_IP_ASC_ASC_ABCON_TXINV (1 << 10) -#define INCA_IP_ASC_ASC_ABCON_ABEM (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_ASC_ASC_ABCON_FCDETEN (1 << 4) -#define INCA_IP_ASC_ASC_ABCON_ABDETEN (1 << 3) -#define INCA_IP_ASC_ASC_ABCON_ABSTEN (1 << 2) -#define INCA_IP_ASC_ASC_ABCON_AUREN (1 << 1) -#define INCA_IP_ASC_ASC_ABCON_ABEN (1 << 0) - -/***Receive FIFO Control Register***/ -#define INCA_IP_ASC_RXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0040)) -#define INCA_IP_ASC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_ASC_RXFCON_RXFFLU (1 << 1) -#define INCA_IP_ASC_RXFCON_RXFEN (1 << 0) - -/***Transmit FIFO Control Register***/ -#define INCA_IP_ASC_TXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0044)) -#define INCA_IP_ASC_TXFCON_TXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_ASC_TXFCON_TXFFLU (1 << 1) -#define INCA_IP_ASC_TXFCON_TXFEN (1 << 0) - -/***FIFO Status Register***/ -#define INCA_IP_ASC_FSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0048)) -#define INCA_IP_ASC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***ASC Write HW Modified Autobaud Control Register***/ -#define INCA_IP_ASC_ASC_WHBABCON ((volatile u32*)(INCA_IP_ASC+ 0x0054)) -#define INCA_IP_ASC_ASC_WHBABCON_SETABEN (1 << 1) -#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN (1 << 0) - -/***ASC Autobaud Status Register***/ -#define INCA_IP_ASC_ASC_ABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0034)) -#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT (1 << 4) -#define INCA_IP_ASC_ASC_ABSTAT_SCCDET (1 << 3) -#define INCA_IP_ASC_ASC_ABSTAT_SCSDET (1 << 2) -#define INCA_IP_ASC_ASC_ABSTAT_FCCDET (1 << 1) -#define INCA_IP_ASC_ASC_ABSTAT_FCSDET (1 << 0) - -/***ASC Write HW Modified Autobaud Status Register***/ -#define INCA_IP_ASC_ASC_WHBABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0058)) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT (1 << 9) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET (1 << 7) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET (1 << 6) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET (1 << 5) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET (1 << 4) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET (1 << 3) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET (1 << 2) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET (1 << 1) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET (1 << 0) - -/***ASC Clock Control Register***/ -#define INCA_IP_ASC_ASC_CLC ((volatile u32*)(INCA_IP_ASC+ 0x0000)) -#define INCA_IP_ASC_ASC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_ASC_ASC_CLC_DISS (1 << 1) -#define INCA_IP_ASC_ASC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : DMA register address and bits */ -/***********************************************************************/ - -#define INCA_IP_DMA (0xBF108000) -/***********************************************************************/ - - -/***DMA RX Channel 0 Command Register***/ -#define INCA_IP_DMA_DMA_RXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0800)) -#define INCA_IP_DMA_DMA_RXCCR0_LBE (1 << 31) -#define INCA_IP_DMA_DMA_RXCCR0_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_RXCCR0_INIT (1 << 2) -#define INCA_IP_DMA_DMA_RXCCR0_OFF (1 << 1) -#define INCA_IP_DMA_DMA_RXCCR0_HR (1 << 0) - -/***DMA RX Channel 1 Command Register***/ -#define INCA_IP_DMA_DMA_RXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0804)) -#define INCA_IP_DMA_DMA_RXCCR1_LBE (1 << 31) -#define INCA_IP_DMA_DMA_RXCCR1_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_RXCCR1_INIT (1 << 2) -#define INCA_IP_DMA_DMA_RXCCR1_OFF (1 << 1) -#define INCA_IP_DMA_DMA_RXCCR1_HR (1 << 0) - -/***DMA Receive Interrupt Status Register***/ -#define INCA_IP_DMA_DMA_RXISR ((volatile u32*)(INCA_IP_DMA+ 0x0808)) -#define INCA_IP_DMA_DMA_RXISR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_RXISR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_RXISR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_RXISR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA Receive Interrupt Mask Register***/ -#define INCA_IP_DMA_DMA_RXIMR ((volatile u32*)(INCA_IP_DMA+ 0x080C)) -#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_RXIMR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_RXIMR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_RXIMR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Rx Channel 0 -***/ -#define INCA_IP_DMA_DMA_RXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x0810)) -#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Rx Channel 1 -***/ -#define INCA_IP_DMA_DMA_RXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x0814)) -#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA Receive Channel Polling Time***/ -#define INCA_IP_DMA_DMA_RXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x0818)) -#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 30) -#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 28) -#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***DMA TX Channel 0 Command Register (Voice Port)***/ -#define INCA_IP_DMA_DMA_TXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0880)) -#define INCA_IP_DMA_DMA_TXCCR0_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR0_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR0_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR0_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR0_INIT (1 << 0) - -/***DMA TX Channel 1 Command Register (Mangmt Port)***/ -#define INCA_IP_DMA_DMA_TXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0884)) -#define INCA_IP_DMA_DMA_TXCCR1_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR1_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR1_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR1_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR1_INIT (1 << 0) - -/***DMA TX Channel 2 Command Register (SSC Port)***/ -#define INCA_IP_DMA_DMA_TXCCR2 ((volatile u32*)(INCA_IP_DMA+ 0x0888)) -#define INCA_IP_DMA_DMA_TXCCR2_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR2_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR2_HBF (1 << 29) -#define INCA_IP_DMA_DMA_TXCCR2_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR2_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR2_INIT (1 << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 0 -***/ -#define INCA_IP_DMA_DMA_TXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x08A0)) -#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 1 -***/ -#define INCA_IP_DMA_DMA_TXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x08A4)) -#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 2 -***/ -#define INCA_IP_DMA_DMA_TXFRDA2 ((volatile u32*)(INCA_IP_DMA+ 0x08A8)) -#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA Transmit Channel Arbitration Register***/ -#define INCA_IP_DMA_DMA_TXWGT ((volatile u32*)(INCA_IP_DMA+ 0x08C0)) -#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA Transmit Channel Polling Time***/ -#define INCA_IP_DMA_DMA_TXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x08C4)) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value) (((( 1 << 2) - 1) & (value)) << 30) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 28) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***DMA Transmit Interrupt Status Register***/ -#define INCA_IP_DMA_DMA_TXISR ((volatile u32*)(INCA_IP_DMA+ 0x08C8)) -#define INCA_IP_DMA_DMA_TXISR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_DMA_DMA_TXISR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) -#define INCA_IP_DMA_DMA_TXISR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_TXISR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***DMA Transmit Interrupt Mask Register***/ -#define INCA_IP_DMA_DMA_TXIMR ((volatile u32*)(INCA_IP_DMA+ 0x08CC)) -#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_DMA_DMA_TXIMR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) -#define INCA_IP_DMA_DMA_TXIMR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_TXIMR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : Debug register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Debug (0xBF106000) -/***********************************************************************/ - - -/***MCD Break Bus Switch Register***/ -#define INCA_IP_Debug_MCD_BBS ((volatile u32*)(INCA_IP_Debug+ 0x0000)) -#define INCA_IP_Debug_MCD_BBS_BTP1 (1 << 19) -#define INCA_IP_Debug_MCD_BBS_BTP0 (1 << 18) -#define INCA_IP_Debug_MCD_BBS_BSP1 (1 << 17) -#define INCA_IP_Debug_MCD_BBS_BSP0 (1 << 16) -#define INCA_IP_Debug_MCD_BBS_BT5EN (1 << 15) -#define INCA_IP_Debug_MCD_BBS_BT4EN (1 << 14) -#define INCA_IP_Debug_MCD_BBS_BT5 (1 << 13) -#define INCA_IP_Debug_MCD_BBS_BT4 (1 << 12) -#define INCA_IP_Debug_MCD_BBS_BS5EN (1 << 7) -#define INCA_IP_Debug_MCD_BBS_BS4EN (1 << 6) -#define INCA_IP_Debug_MCD_BBS_BS5 (1 << 5) -#define INCA_IP_Debug_MCD_BBS_BS4 (1 << 4) - -/***MCD Multiplexer Control Register***/ -#define INCA_IP_Debug_MCD_MCR ((volatile u32*)(INCA_IP_Debug+ 0x0008)) -#define INCA_IP_Debug_MCD_MCR_MUX5 (1 << 4) -#define INCA_IP_Debug_MCD_MCR_MUX4 (1 << 3) -#define INCA_IP_Debug_MCD_MCR_MUX1 (1 << 0) - -/***********************************************************************/ -/* Module : TSF register address and bits */ -/***********************************************************************/ - -#define INCA_IP_TSF (0xB8000900) -/***********************************************************************/ - - -/***TSF Configuration Register (0000H)***/ -#define INCA_IP_TSF_TSF_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0000)) -#define INCA_IP_TSF_TSF_CONF_PWMEN (1 << 2) -#define INCA_IP_TSF_TSF_CONF_LEDEN (1 << 1) -#define INCA_IP_TSF_TSF_CONF_KEYEN (1 << 0) - -/***Key scan Configuration Register (0004H)***/ -#define INCA_IP_TSF_KEY_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0004)) -#define INCA_IP_TSF_KEY_CONF_SL (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Scan Register Line 0 and 1 (0008H)***/ -#define INCA_IP_TSF_SREG01 ((volatile u32*)(INCA_IP_TSF+ 0x0008)) -#define INCA_IP_TSF_SREG01_RES1x (value) (((( 1 << 12) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG01_RES0x (value) (((( 1 << 13) - 1) & (value)) << 0) - -/***Scan Register Line 2 and 3 (000CH)***/ -#define INCA_IP_TSF_SREG23 ((volatile u32*)(INCA_IP_TSF+ 0x000C)) -#define INCA_IP_TSF_SREG23_RES3x (value) (((( 1 << 10) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG23_RES2x (value) (((( 1 << 11) - 1) & (value)) << 0) - -/***Scan Register Line 4, 5 and 6 (0010H)***/ -#define INCA_IP_TSF_SREG456 ((volatile u32*)(INCA_IP_TSF+ 0x0010)) -#define INCA_IP_TSF_SREG456_RES6x (value) (((( 1 << 7) - 1) & (value)) << 24) -#define INCA_IP_TSF_SREG456_RES5x (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG456_RES4x (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***Scan Register Line 7 to 12 (0014H)***/ -#define INCA_IP_TSF_SREG7to12 ((volatile u32*)(INCA_IP_TSF+ 0x0014)) -#define INCA_IP_TSF_SREG7to12_RES12x (1 << 28) -#define INCA_IP_TSF_SREG7to12_RES11x (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_TSF_SREG7to12_RES10x (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_TSF_SREG7to12_RES9x (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG7to12_RES8x (value) (((( 1 << 5) - 1) & (value)) << 8) -#define INCA_IP_TSF_SREG7to12_RES7x (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***LEDMUX Configuration Register (0018H)***/ -#define INCA_IP_TSF_LEDMUX_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0018)) -#define INCA_IP_TSF_LEDMUX_CONF_ETL1 (1 << 25) -#define INCA_IP_TSF_LEDMUX_CONF_ESTA1 (1 << 24) -#define INCA_IP_TSF_LEDMUX_CONF_EDPX1 (1 << 23) -#define INCA_IP_TSF_LEDMUX_CONF_EACT1 (1 << 22) -#define INCA_IP_TSF_LEDMUX_CONF_ESPD1 (1 << 21) -#define INCA_IP_TSF_LEDMUX_CONF_ETL0 (1 << 20) -#define INCA_IP_TSF_LEDMUX_CONF_ESTA0 (1 << 19) -#define INCA_IP_TSF_LEDMUX_CONF_EDPX0 (1 << 18) -#define INCA_IP_TSF_LEDMUX_CONF_EACT0 (1 << 17) -#define INCA_IP_TSF_LEDMUX_CONF_ESPD0 (1 << 16) -#define INCA_IP_TSF_LEDMUX_CONF_INV (1 << 1) -#define INCA_IP_TSF_LEDMUX_CONF_NCOL (1 << 0) - -/***LED Register (001CH)***/ -#define INCA_IP_TSF_LED_REG ((volatile u32*)(INCA_IP_TSF+ 0x001C)) -#define INCA_IP_TSF_LED_REG_Lxy (value) (((( 1 << 24) - 1) & (value)) << 0) - -/***Pulse Width Modulator 1 and 2 Register (0020H)***/ -#define INCA_IP_TSF_PWM12 ((volatile u32*)(INCA_IP_TSF+ 0x0020)) -#define INCA_IP_TSF_PWM12_PW2PW1 (value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***********************************************************************/ -/* Module : Ports register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Ports (0xB8000A00) -/***********************************************************************/ - - -/***Port 1 Data Output Register (0020H)***/ -#define INCA_IP_Ports_P1_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0020)) -#define INCA_IP_Ports_P1_OUT_P(value) (1 << value) - - -/***Port 2 Data Output Register (0040H)***/ -#define INCA_IP_Ports_P2_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0040)) -#define INCA_IP_Ports_P2_OUT_P(value) (1 << value) - - -/***Port 1 Data Input Register (0024H)***/ -#define INCA_IP_Ports_P1_IN ((volatile u32*)(INCA_IP_Ports+ 0x0024)) -#define INCA_IP_Ports_P1_IN_P(value) (1 << value) - - -/***Port 2 Data Input Register (0044H)***/ -#define INCA_IP_Ports_P2_IN ((volatile u32*)(INCA_IP_Ports+ 0x0044)) -#define INCA_IP_Ports_P2_IN_P(value) (1 << value) - - -/***Port 1 Direction Register (0028H)***/ -#define INCA_IP_Ports_P1_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0028)) -#define INCA_IP_Ports_P1_DIR_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Port 2 Direction Register (0048H)***/ -#define INCA_IP_Ports_P2_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0048)) -#define INCA_IP_Ports_P2_DIR_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Port 0 Alternate Function Select Register 0 (000C H) -***/ -#define INCA_IP_Ports_P0_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x000C)) -#define INCA_IP_Ports_P0_ALTSEL_Port0P(value) (1 << value) - - -/***Port 1 Alternate Function Select Register 0 (002C H) -***/ -#define INCA_IP_Ports_P1_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x002C)) -#define INCA_IP_Ports_P1_ALTSEL_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_ALTSEL_Port2P(value) (1 << value) - - -/***Port 2 Alternate Function Select Register 0 (004C H) -***/ -#define INCA_IP_Ports_P2_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x004C)) -#define INCA_IP_Ports_P2_ALTSEL_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_ALTSEL_Port2P(value) (1 << value) - - -/***Port 0 Input Schmitt-Trigger Off Register (0010 H) -***/ -#define INCA_IP_Ports_P0_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0010)) -#define INCA_IP_Ports_P0_STOFF_Port0P(value) (1 << value) - - -/***Port 1 Input Schmitt-Trigger Off Register (0030 H) -***/ -#define INCA_IP_Ports_P1_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0030)) -#define INCA_IP_Ports_P1_STOFF_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_STOFF_Port2P(value) (1 << value) - - -/***Port 2 Input Schmitt-Trigger Off Register (0050 H) -***/ -#define INCA_IP_Ports_P2_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0050)) -#define INCA_IP_Ports_P2_STOFF_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_STOFF_Port2P(value) (1 << value) - - -/***Port 2 Open Drain Control Register (0054H)***/ -#define INCA_IP_Ports_P2_OD ((volatile u32*)(INCA_IP_Ports+ 0x0054)) -#define INCA_IP_Ports_P2_OD_Port2P(value) (1 << value) - - -/***Port 0 Pull Up Device Enable Register (0018 H)***/ -#define INCA_IP_Ports_P0_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0018)) -#define INCA_IP_Ports_P0_PUDEN_Port0P(value) (1 << value) - - -/***Port 2 Pull Up Device Enable Register (0058 H)***/ -#define INCA_IP_Ports_P2_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0058)) -#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) - -#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) - - -/***Port 0 Pull Up/Pull Down Select Register (001C H)***/ -#define INCA_IP_Ports_P0_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x001C)) -#define INCA_IP_Ports_P0_PUDSEL_Port0P(value) (1 << value) - - -/***Port 2 Pull Up/Pull Down Select Register (005C H)***/ -#define INCA_IP_Ports_P2_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x005C)) -#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) - -#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) - - -/***********************************************************************/ -/* Module : DES/3DES register address and bits */ -/***********************************************************************/ - -#define INCA_IP_DES_3DES (0xB8000800) -/***********************************************************************/ - - -/***DES Input Data High Register***/ -#define INCA_IP_DES_3DES_DES_IHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000)) -#define INCA_IP_DES_3DES_DES_IHR_IH(value) (1 << value) - - -/***DES Input Data Low Register***/ -#define INCA_IP_DES_3DES_DES_ILR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004)) -#define INCA_IP_DES_3DES_DES_ILR_IL(value) (1 << value) - - -/***DES Key #1 High Register***/ -#define INCA_IP_DES_3DES_DES_K1HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008)) -#define INCA_IP_DES_3DES_DES_K1HR_K1H(value) (1 << value) - - -/***DES Key #1 Low Register***/ -#define INCA_IP_DES_3DES_DES_K1LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C)) -#define INCA_IP_DES_3DES_DES_K1LR_K1L(value) (1 << value) - - -/***DES Key #2 High Register***/ -#define INCA_IP_DES_3DES_DES_K2HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010)) -#define INCA_IP_DES_3DES_DES_K2HR_K2H(value) (1 << value) - - -/***DES Key #2 Low Register***/ -#define INCA_IP_DES_3DES_DES_K2LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014)) -#define INCA_IP_DES_3DES_DES_K2LR_K2L(value) (1 << value) - - -/***DES Key #3 High Register***/ -#define INCA_IP_DES_3DES_DES_K3HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018)) -#define INCA_IP_DES_3DES_DES_K3HR_K3H(value) (1 << value) - - -/***DES Key #3 Low Register***/ -#define INCA_IP_DES_3DES_DES_K3LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C)) -#define INCA_IP_DES_3DES_DES_K3LR_K3L(value) (1 << value) - - -/***DES Initialization Vector High Register***/ -#define INCA_IP_DES_3DES_DES_IVHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020)) -#define INCA_IP_DES_3DES_DES_IVHR_IVH(value) (1 << value) - - -/***DES Initialization Vector Low Register***/ -#define INCA_IP_DES_3DES_DES_IVLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024)) -#define INCA_IP_DES_3DES_DES_IVLR_IVL(value) (1 << value) - - -/***DES Control Register***/ -#define INCA_IP_DES_3DES_DES_CONTROLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028)) -#define INCA_IP_DES_3DES_DES_CONTROLR_KRE (1 << 31) -#define INCA_IP_DES_3DES_DES_CONTROLR_DAU (1 << 16) -#define INCA_IP_DES_3DES_DES_CONTROLR_F(value) (1 << value) - -#define INCA_IP_DES_3DES_DES_CONTROLR_O(value) (1 << value) - -#define INCA_IP_DES_3DES_DES_CONTROLR_GO (1 << 8) -#define INCA_IP_DES_3DES_DES_CONTROLR_STP (1 << 7) -#define INCA_IP_DES_3DES_DES_CONTROLR_IEN (1 << 6) -#define INCA_IP_DES_3DES_DES_CONTROLR_BUS (1 << 5) -#define INCA_IP_DES_3DES_DES_CONTROLR_SM (1 << 4) -#define INCA_IP_DES_3DES_DES_CONTROLR_E_D (1 << 3) -#define INCA_IP_DES_3DES_DES_CONTROLR_M(value) (1 << value) - - -/***DES Output Data High Register***/ -#define INCA_IP_DES_3DES_DES_OHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C)) -#define INCA_IP_DES_3DES_DES_OHR_OH(value) (1 << value) - - -/***DES Output Data Low Register***/ -#define INCA_IP_DES_3DES_DES_OLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030)) -#define INCA_IP_DES_3DES_DES_OLR_OL(value) (1 << value) - - -/***********************************************************************/ -/* Module : AES register address and bits */ -/***********************************************************************/ - -#define INCA_IP_AES (0xB8000880) -/***********************************************************************/ - - -/***AES Input Data 3 Register***/ -#define INCA_IP_AES_AES_ID3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID3R_I(value) (1 << value) - - -/***AES Input Data 2 Register***/ -#define INCA_IP_AES_AES_ID2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID2R_I(value) (1 << value) - - -/***AES Input Data 1 Register***/ -#define INCA_IP_AES_AES_ID1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID1R_I(value) (1 << value) - - -/***AES Input Data 0 Register***/ -#define INCA_IP_AES_AES_ID0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID0R_I(value) (1 << value) - - -/***AES Output Data 3 Register***/ -#define INCA_IP_AES_AES_OD3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD3R_O(value) (1 << value) - - -/***AES Output Data 2 Register***/ -#define INCA_IP_AES_AES_OD2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD2R_O(value) (1 << value) - - -/***AES Output Data 1 Register***/ -#define INCA_IP_AES_AES_OD1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD1R_O(value) (1 << value) - - -/***AES Output Data 0 Register***/ -#define INCA_IP_AES_AES_OD0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD0R_O(value) (1 << value) - - -/***AES Key 7 Register***/ -#define INCA_IP_AES_AES_K7R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K7R_K(value) (1 << value) - - -/***AES Key 6 Register***/ -#define INCA_IP_AES_AES_K6R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K6R_K(value) (1 << value) - - -/***AES Key 5 Register***/ -#define INCA_IP_AES_AES_K5R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K5R_K(value) (1 << value) - - -/***AES Key 4 Register***/ -#define INCA_IP_AES_AES_K4R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K4R_K(value) (1 << value) - - -/***AES Key 3 Register***/ -#define INCA_IP_AES_AES_K3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K3R_K(value) (1 << value) - - -/***AES Key 2 Register***/ -#define INCA_IP_AES_AES_K2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K2R_K(value) (1 << value) - - -/***AES Key 1 Register***/ -#define INCA_IP_AES_AES_K1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K1R_K(value) (1 << value) - - -/***AES Key 0 Register***/ -#define INCA_IP_AES_AES_K0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K0R_K(value) (1 << value) - - -/***AES Initialization Vector 3 Register***/ -#define INCA_IP_AES_AES_IV3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV3R_IV(value) (1 << value) - - -/***AES Initialization Vector 2 Register***/ -#define INCA_IP_AES_AES_IV2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV2R_IV(value) (1 << value) - - -/***AES Initialization Vector 1 Register***/ -#define INCA_IP_AES_AES_IV1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV1R_IV(value) (1 << value) - - -/***AES Initialization Vector 0 Register***/ -#define INCA_IP_AES_AES_IV0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV0R_IV (value) (((( 1 << 32) - 1) &(value)) << 0) - -/***AES Control Register***/ -#define INCA_IP_AES_AES_CONTROLR ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_CONTROLR_KRE (1 << 31) -#define INCA_IP_AES_AES_CONTROLR_DAU (1 << 16) -#define INCA_IP_AES_AES_CONTROLR_PNK (1 << 15) -#define INCA_IP_AES_AES_CONTROLR_F(value) (1 << value) - -#define INCA_IP_AES_AES_CONTROLR_O(value) (1 << value) - -#define INCA_IP_AES_AES_CONTROLR_GO (1 << 8) -#define INCA_IP_AES_AES_CONTROLR_STP (1 << 7) -#define INCA_IP_AES_AES_CONTROLR_IEN (1 << 6) -#define INCA_IP_AES_AES_CONTROLR_BUS (1 << 5) -#define INCA_IP_AES_AES_CONTROLR_SM (1 << 4) -#define INCA_IP_AES_AES_CONTROLR_E_D (1 << 3) -#define INCA_IP_AES_AES_CONTROLR_KV (1 << 2) -#define INCA_IP_AES_AES_CONTROLR_K(value) (1 << value) - - -/***********************************************************************/ -/* Module : I�C register address and bits */ -/***********************************************************************/ - -#define INCA_IP_IIC (0xB8000700) -/***********************************************************************/ - - -/***I�C Port Input Select Register***/ -#define INCA_IP_IIC_IIC_PISEL ((volatile u32*)(INCA_IP_IIC+ 0x0004)) -#define INCA_IP_IIC_IIC_PISEL_SDAIS(value) (1 << value) - -#define INCA_IP_IIC_IIC_PISEL_SCLIS(value) (1 << value) - - -/***I�C Clock Control Register***/ -#define INCA_IP_IIC_IIC_CLC ((volatile u32*)(INCA_IP_IIC+ 0x0000)) -#define INCA_IP_IIC_IIC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_CLC_DISS (1 << 1) -#define INCA_IP_IIC_IIC_CLC_DISR (1 << 0) - -/***I�C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_0_WMEN (1 << 31) -#define INCA_IP_IIC_IIC_SYSCON_0_CI (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_IIC_IIC_SYSCON_0_STP (1 << 25) -#define INCA_IP_IIC_IIC_SYSCON_0_IGE (1 << 24) -#define INCA_IP_IIC_IIC_SYSCON_0_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_0_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_0_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_0_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_0_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_0_RMEN (1 << 15) -#define INCA_IP_IIC_IIC_SYSCON_0_CO (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_0_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_0_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_0_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_0_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_0_ADR (1 << 0) - -/***I�C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_1_RM (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_IIC_IIC_SYSCON_1_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_1_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_1_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_1_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_1_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_1_RMEN (1 << 15) -#define INCA_IP_IIC_IIC_SYSCON_1_CO (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_1_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_1_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_1_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_1_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_1_ADR (1 << 0) - -/***I�C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_2 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_2_WMEN (1 << 31) -#define INCA_IP_IIC_IIC_SYSCON_2_CI (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_IIC_IIC_SYSCON_2_STP (1 << 25) -#define INCA_IP_IIC_IIC_SYSCON_2_IGE (1 << 24) -#define INCA_IP_IIC_IIC_SYSCON_2_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_2_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_2_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_2_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_2_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_2_WM (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_2_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_2_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_2_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_2_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_2_ADR (1 << 0) - -/***I�C Write Hardware Modified System Control Register -***/ -#define INCA_IP_IIC_IIC_WHBSYSCON ((volatile u32*)(INCA_IP_IIC+ 0x0020)) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN (1 << 31) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN (1 << 30) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP (1 << 26) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP (1 << 25) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX (1 << 24) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX (1 << 23) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS (1 << 22) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM (1 << 20) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM (1 << 19) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC (1 << 17) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC (1 << 16) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN (1 << 15) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN (1 << 14) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE (1 << 10) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP (1 << 9) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD (1 << 8) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE (1 << 7) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP (1 << 6) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD (1 << 5) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL (1 << 2) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL (1 << 1) - -/***I�C Bus Control Register***/ -#define INCA_IP_IIC_IIC_BUSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) -#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD (1 << 31) -#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value) (((( 1 << 10) - 1) & (value)) << 16) -#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value) (1 << value) - -#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value) (1 << value) - - -/***I�C Bus Control Register***/ -#define INCA_IP_IIC_IIC_BUSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) -#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD (1 << 31) -#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value) (((( 1 << 7) - 1) & (value)) << 17) -#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value) (1 << value) - -#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value) (1 << value) - - -/***I�C Receive Transmit Buffer***/ -#define INCA_IP_IIC_IIC_RTB ((volatile u32*)(INCA_IP_IIC+ 0x0018)) -#define INCA_IP_IIC_IIC_RTB_RTB(value) (1 << value) - - -/***********************************************************************/ -/* Module : FB register address and bits */ -/***********************************************************************/ - -#define INCA_IP_FB (0xBF880000) -/***********************************************************************/ - - -/***FB Access Error Cause Register***/ -#define INCA_IP_FB_FB_ERRCAUSE ((volatile u32*)(INCA_IP_FB+ 0x0100)) -#define INCA_IP_FB_FB_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_FB_FB_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***FB Access Error Address Register***/ -#define INCA_IP_FB_FB_ERRADDR ((volatile u32*)(INCA_IP_FB+ 0x0108)) -#define INCA_IP_FB_FB_ERRADDR_ADDR - -/***FB Configuration Register***/ -#define INCA_IP_FB_FB_CFG ((volatile u32*)(INCA_IP_FB+ 0x0800)) -#define INCA_IP_FB_FB_CFG_SVM (1 << 0) - -/***********************************************************************/ -/* Module : SRAM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SRAM (0xBF980000) -/***********************************************************************/ - - -/***SRAM Size Register***/ -#define INCA_IP_SRAM_SRAM_SIZE ((volatile u32*)(INCA_IP_SRAM+ 0x0800)) -#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : BIU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_BIU (0xBFA80000) -/***********************************************************************/ - - -/***BIU Identification Register***/ -#define INCA_IP_BIU_BIU_ID ((volatile u32*)(INCA_IP_BIU+ 0x0000)) -#define INCA_IP_BIU_BIU_ID_ARCH (1 << 16) -#define INCA_IP_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***BIU Access Error Cause Register***/ -#define INCA_IP_BIU_BIU_ERRCAUSE ((volatile u32*)(INCA_IP_BIU+ 0x0100)) -#define INCA_IP_BIU_BIU_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***BIU Access Error Address Register***/ -#define INCA_IP_BIU_BIU_ERRADDR ((volatile u32*)(INCA_IP_BIU+ 0x0108)) -#define INCA_IP_BIU_BIU_ERRADDR_ADDR - -/***********************************************************************/ -/* Module : ICU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_ICU (0xBF101000) -/***********************************************************************/ - - -/***IM0 Interrupt Status Register***/ -#define INCA_IP_ICU_IM0_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0000)) -#define INCA_IP_ICU_IM0_ISR_IR(value) (1 << value) - - -/***IM1 Interrupt Status Register***/ -#define INCA_IP_ICU_IM1_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0200)) -#define INCA_IP_ICU_IM1_ISR_IR(value) (1 << value) - - -/***IM2 Interrupt Status Register***/ -#define INCA_IP_ICU_IM2_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0400)) -#define INCA_IP_ICU_IM2_ISR_IR(value) (1 << value) - - -/***IM0 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM0_IER ((volatile u32*)(INCA_IP_ICU+ 0x0008)) -#define INCA_IP_ICU_IM0_IER_IR(value) (1 << value) - - -/***IM1 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM1_IER ((volatile u32*)(INCA_IP_ICU+ 0x0208)) -#define INCA_IP_ICU_IM1_IER_IR(value) (1 << value) - - -/***IM2 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM2_IER ((volatile u32*)(INCA_IP_ICU+ 0x0408)) -#define INCA_IP_ICU_IM2_IER_IR(value) (1 << value) - - -/***IM0 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM0_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0010)) -#define INCA_IP_ICU_IM0_IOSR_IR(value) (1 << value) - - -/***IM1 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM1_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0210)) -#define INCA_IP_ICU_IM1_IOSR_IR(value) (1 << value) - - -/***IM2 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM2_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0410)) -#define INCA_IP_ICU_IM2_IOSR_IR(value) (1 << value) - - -/***IM0 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM0_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0018)) -#define INCA_IP_ICU_IM0_IRSR_IR(value) (1 << value) - - -/***IM1 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM1_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0218)) -#define INCA_IP_ICU_IM1_IRSR_IR(value) (1 << value) - - -/***IM2 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM2_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0418)) -#define INCA_IP_ICU_IM2_IRSR_IR(value) (1 << value) - - -/***External Interrupt Control Register***/ -#define INCA_IP_ICU_ICU_EICR ((volatile u32*)(INCA_IP_ICU+ 0x0B00)) -#define INCA_IP_ICU_ICU_EICR_EII5 (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_ICU_ICU_EICR_EII4 (value) (((( 1 << 3) - 1) & (value)) << 16) -#define INCA_IP_ICU_ICU_EICR_EII3 (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_ICU_ICU_EICR_EII2 (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_ICU_ICU_EICR_EII1 (value) (((( 1 << 3) - 1) & (value)) << 4) -#define INCA_IP_ICU_ICU_EICR_EII0 (value) (((( 1 << 3) - 1) & (value)) << 0) diff --git a/arch/mips/include/asm/u-boot-mips.h b/arch/mips/include/asm/u-boot-mips.h index 9f3cce9..a5b2fc0 100644 --- a/arch/mips/include/asm/u-boot-mips.h +++ b/arch/mips/include/asm/u-boot-mips.h @@ -21,5 +21,3 @@ static inline unsigned long image_copy_end(void) extern char __image_copy_end[]; return (unsigned long) &__image_copy_end; } - -extern int incaip_set_cpuclk(void); diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 317c825..3200d87 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -103,9 +103,6 @@ init_fnc_t *init_sequence[] = { board_early_init_f, timer_init, env_init, /* initialize environment */ -#ifdef CONFIG_INCA_IP - incaip_set_cpuclk, /* set cpu clock according to env. variable */ -#endif init_baudrate, /* initialize baudrate settings */ serial_init, /* serial communications setup */ console_init_f, diff --git a/board/incaip/Makefile b/board/incaip/Makefile deleted file mode 100644 index 602d30e..0000000 --- a/board/incaip/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = incaip.o flash.o -obj-y += lowlevel_init.o diff --git a/board/incaip/README b/board/incaip/README deleted file mode 100644 index 1329152..0000000 --- a/board/incaip/README +++ /dev/null @@ -1,57 +0,0 @@ - -Flash programming on the INCA-IP board is complicated because of the -EBU swapping unit. A BDI2000 can be used for flash programming only -if the EBU swapping unit is enabled; otherwise it will not detect the -flash memory. But the EBU swapping unit is disadbled after reset, so -if you program some code to flash with the swapping unit on, it will -not be runnable with the swapping unit off. - -The consequence is that you have to write a pre-swapped image to -flash using the BDI2000. A simple host-side tool "inca-swap-bytes" is -provided in the "tools/" directory. Use it as follows: - - bash$ ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp - -Note that the current BDI config file _disables_ the EBU swapping -unit for the flash bank 0. To enable it, (this is required for the -BDI flash commands to work) uncomment the following line in the -config file: - - ;WM32 0xb8000260 0x404161ff ; Swapping unit enabled - -and comment out - - WM32 0xb8000260 0x004161ff ; Swapping unit disabled - -Alternatively, you can use "mm 0xb8000260 <value>" commands to -enable/disable the swapping unit manually. - -Just for reference, here is the complete sequence of actions we took -to install a U-Boot image into flash. - - 1. ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp - - 2. From BDI: - - mm 0xb8000260 0x404161ff - erase 0xb0000000 - erase 0xb0010000 - prog 0xb0000000 /tftpboot/INCA/u-boot.bin.swp bin - mm 0xb8000260 0x004161ff - go 0xb0000000 - - -Ethernet autonegotiation needs some time to complete. Instead of -delaying the boot process in all cases, we just start the -autonegotiation process when U-Boot comes up and that is all. Most -likely, it will complete by the time the network transfer is -attempted for the first time. In the worst case, if a transfer is -attempted before the autonegotiation is complete, just a single -packet would be lost resulting in a single timeout error, and then -the transfer would proceed normally. So the time that we would have -lost unconditionally waiting for the autonegotiation to complete, we -have to wait only if the file transfer is started immediately after -reset. We've verified that this works for all the clock -configurations. - -(C) 2003 Wolfgang Denk diff --git a/board/incaip/config.mk b/board/incaip/config.mk deleted file mode 100644 index e854f8e..0000000 --- a/board/incaip/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# INCA-IP board with MIPS 4Kc CPU core -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xB0000000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80100000 diff --git a/board/incaip/flash.c b/board/incaip/flash.c deleted file mode 100644 index a786ac9..0000000 --- a/board/incaip/flash.c +++ /dev/null @@ -1,655 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/inca-ip.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it - * has nothing to do with the flash chip being 8-bit or 16-bit. - */ -#ifdef CONFIG_FLASH_16BIT -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFFFF -#else -typedef unsigned long FLASH_PORT_WIDTH; -typedef volatile unsigned long FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFFFFFFFF -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define ORMASK(size) ((-size) & OR_AM_MSK) - -#if 0 -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02aa -#else -#define FLASH_CYCLE1 0x0554 -#define FLASH_CYCLE2 0x02ab -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(FPWV *addr, flash_info_t *info); -static void flash_reset(flash_info_t *info); -static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data); -static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data); -static void flash_get_offsets(ulong base, flash_info_t *info); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - int i; - - /* Init: no FLASHes known */ - for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2; - ulong * buscon = (ulong *) - ((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2); - - /* Disable write protection */ - *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS; - -#if 1 - memset(&flash_info[i], 0, sizeof(flash_info_t)); -#endif - - flash_info[i].size = - flash_get_size((FPW *)flashbase, &flash_info[i]); - - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n", - i, flash_info[i].size); - } - - size += flash_info[i].size; - } - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t *info) -{ - FPWV *base = (FPWV *)(info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW)0x00FF00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW)0x00F000F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL - && (info->flash_id & FLASH_BTYPE)) { - int bootsect_size; /* number of bytes/boot sector */ - int sect_size; /* number of bytes/regular sector */ - - bootsect_size = 0x00002000 * (sizeof(FPW)/2); - sect_size = 0x00010000 * (sizeof(FPW)/2); - - /* set sector offsets for bottom boot block type */ - for (i = 0; i < 8; ++i) { - info->start[i] = base + (i * bootsect_size); - } - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i - 7) * sect_size); - } - } - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD - && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) { - - int sect_size; /* number of bytes/sector */ - - sect_size = 0x00010000 * (sizeof(FPW)/2); - - /* set up sector start address table (uniform sector type) */ - for( i = 0; i < info->sector_count; i++ ) - info->start[i] = base + (i * sect_size); - } -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->start[0] <= base && base < info->start[0] + info->size) - break; - } - - return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - uchar *boottype; - uchar *bootletter; - char *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } - else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM640U: - fmt = "29LV641D (64 Mbit, uniform sectors)\n"; - break; - case FLASH_28F800C3B: - case FLASH_28F800C3T: - fmt = "28F800C3%s (8 Mbit, %s)\n"; - break; - case FLASH_INTEL800B: - case FLASH_INTEL800T: - fmt = "28F800B3%s (8 Mbit, %s)\n"; - break; - case FLASH_28F160C3B: - case FLASH_28F160C3T: - fmt = "28F160C3%s (16 Mbit, %s)\n"; - break; - case FLASH_INTEL160B: - case FLASH_INTEL160T: - fmt = "28F160B3%s (16 Mbit, %s)\n"; - break; - case FLASH_28F320C3B: - case FLASH_28F320C3T: - fmt = "28F320C3%s (32 Mbit, %s)\n"; - break; - case FLASH_INTEL320B: - case FLASH_INTEL320T: - fmt = "28F320B3%s (32 Mbit, %s)\n"; - break; - case FLASH_28F640C3B: - case FLASH_28F640C3T: - fmt = "28F640C3%s (64 Mbit, %s)\n"; - break; - case FLASH_INTEL640B: - case FLASH_INTEL640T: - fmt = "28F640B3%s (64 Mbit, %s)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf (fmt, bootletter, boottype); - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (FPWV *addr, flash_info_t *info) -{ - /* Write auto select command: read Manufacturer ID */ - - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. - * This works for any bus width and any FLASH device width. - */ - switch (addr[1] & 0xff) { - - case (uchar)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case (uchar)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) { - - case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */ - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - case (FPW)INTEL_ID_28F800C3B: - info->flash_id += FLASH_28F800C3B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof(FPW)/2); - break; /* => 1 or 2 MB */ - - case (FPW)INTEL_ID_28F800B3B: - info->flash_id += FLASH_INTEL800B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof(FPW)/2); - break; /* => 1 or 2 MB */ - - case (FPW)INTEL_ID_28F160C3B: - info->flash_id += FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof(FPW)/2); - break; /* => 2 or 4 MB */ - - case (FPW)INTEL_ID_28F160B3B: - info->flash_id += FLASH_INTEL160B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof(FPW)/2); - break; /* => 2 or 4 MB */ - - case (FPW)INTEL_ID_28F320C3B: - info->flash_id += FLASH_28F320C3B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof(FPW)/2); - break; /* => 4 or 8 MB */ - - case (FPW)INTEL_ID_28F320B3B: - info->flash_id += FLASH_INTEL320B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof(FPW)/2); - break; /* => 4 or 8 MB */ - - case (FPW)INTEL_ID_28F640C3B: - info->flash_id += FLASH_28F640C3B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - case (FPW)INTEL_ID_28F640B3B: - info->flash_id += FLASH_INTEL640B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - flash_get_offsets((ulong)addr, info); - - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_INTEL800B: - case FLASH_INTEL160B: - case FLASH_INTEL320B: - case FLASH_INTEL640B: - case FLASH_28F800C3B: - case FLASH_28F160C3B: - case FLASH_28F320C3B: - case FLASH_28F640C3B: - case FLASH_AM640U: - break; - case FLASH_UNKNOWN: - default: - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - last = get_timer(0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && rcode == 0; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *)(info->start[sect]); - if (intel) { - *addr = (FPW)0x00500050; /* clear status register */ - *addr = (FPW)0x00200020; /* erase setup */ - *addr = (FPW)0x00D000D0; /* erase confirm */ - } - else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *)(info->start[0]); - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - *addr = (FPW)0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* wait at least 50us for AMD, 80us for Intel. - * Let's wait 1 ms. - */ - udelay (1000); - - while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - - if (intel) { - /* suspend erase */ - *addr = (FPW)0x00B000B0; - } - - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */ - putc ('.'); - last = get_timer(0); - } - } - - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */ - putc ('.'); - last = get_timer(0); - } - - flash_reset(info); /* reset to read mode */ - } - - printf (" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left ) - data += *((uchar *)addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *)addr, data); - break; - case FLASH_MAN_INTEL: - res = write_word_intel(info, (FPWV *)addr, data); - break; - default: - /* unknown flash type, error! */ - printf ("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - - base = (FPWV *)(info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - /* data polling for D7 */ - while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00F000F0; /* reset bank */ - res = 1; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for Intel FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - *dest = (FPW)0x00400040; /* program setup */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00B000B0; /* Suspend program */ - res = 1; - } - } - - if (res == 0 && (*dest & (FPW)0x00100010)) - res = 1; /* write failed, time out error is close enough */ - - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - - return (res); -} diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c deleted file mode 100644 index 217b8af..0000000 --- a/board/incaip/incaip.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <asm/addrspace.h> -#include <asm/inca-ip.h> -#include <asm/io.h> -#include <asm/reboot.h> - -extern uint incaip_get_cpuclk(void); - -void _machine_restart(void) -{ - *INCA_IP_WDT_RST_REQ = 0x3f; -} - -static ulong max_sdram_size(void) -{ - /* The only supported SDRAM data width is 16bit. - */ -#define CONFIG_SYS_DW 2 - - /* The only supported number of SDRAM banks is 4. - */ -#define CONFIG_SYS_NB 4 - - ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0; - int cols = cfgpb0 & 0xF; - int rows = (cfgpb0 & 0xF0) >> 4; - ulong size = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB; - - return size; -} - -phys_size_t initdram(int board_type) -{ - int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0; - ulong size, max_size = 0; - ulong our_address; - - asm volatile ("move %0, $25" : "=r" (our_address) :); - - /* Can't probe for RAM size unless we are running from Flash. - */ - if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) - { - return max_sdram_size(); - } - - for (cols = 0x8; cols <= 0xC; cols++) - { - for (rows = 0xB; rows <= 0xD; rows++) - { - *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | - (rows << 4) | cols; - size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - max_sdram_size()); - - if (size > max_size) - { - best_val = *INCA_IP_SDRAM_MC_CFGPB0; - max_size = size; - } - } - } - - *INCA_IP_SDRAM_MC_CFGPB0 = best_val; - return max_size; -} - -int checkboard (void) -{ - unsigned long chipid = *INCA_IP_WDT_CHIPID; - int part_num; - - puts ("Board: INCA-IP "); - part_num = (chipid >> 12) & 0xffff; - switch (part_num) { - case 0xc0: - printf ("Standard Version, "); - break; - case 0xc1: - printf ("Basic Version, "); - break; - default: - printf ("Unknown Part Number 0x%x ", part_num); - break; - } - - printf ("Chip V1.%ld, ", (chipid >> 28)); - - printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000); - - set_io_port_base(0); - - return 0; -} - -#if defined(CONFIG_INCA_IP_SWITCH) -int board_eth_init(bd_t *bis) -{ - return inca_switch_initialize(bis); -} -#endif diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S deleted file mode 100644 index b6cf6a9..0000000 --- a/board/incaip/lowlevel_init.S +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Memory sub-system initialization code for INCA-IP development board. - * - * Copyright (c) 2003 Wolfgang Denk <wd(a)denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <asm/regdef.h> - - -#define EBU_MODUL_BASE 0xB8000200 -#define EBU_CLC(value) 0x0000(value) -#define EBU_CON(value) 0x0010(value) -#define EBU_ADDSEL0(value) 0x0020(value) -#define EBU_ADDSEL1(value) 0x0024(value) -#define EBU_ADDSEL2(value) 0x0028(value) -#define EBU_BUSCON0(value) 0x0060(value) -#define EBU_BUSCON1(value) 0x0064(value) -#define EBU_BUSCON2(value) 0x0068(value) - -#define MC_MODUL_BASE 0xBF800000 -#define MC_ERRCAUSE(value) 0x0100(value) -#define MC_ERRADDR(value) 0x0108(value) -#define MC_IOGP(value) 0x0800(value) -#define MC_SELFRFSH(value) 0x0A00(value) -#define MC_CTRLENA(value) 0x1000(value) -#define MC_MRSCODE(value) 0x1008(value) -#define MC_CFGDW(value) 0x1010(value) -#define MC_CFGPB0(value) 0x1018(value) -#define MC_LATENCY(value) 0x1038(value) -#define MC_TREFRESH(value) 0x1040(value) - -#define CGU_MODUL_BASE 0xBF107000 -#define CGU_PLL1CR(value) 0x0008(value) -#define CGU_DIVCR(value) 0x0010(value) -#define CGU_MUXCR(value) 0x0014(value) -#define CGU_PLL1SR(value) 0x000C(value) - - .set noreorder - - -/* - * void ebu_init(long) - * - * a0 has the clock value we are going to run at - */ - .globl ebu_init - .ent ebu_init -ebu_init: -__ebu_init: - - li t1, EBU_MODUL_BASE - li t2, 0xA0000041 - sw t2, EBU_ADDSEL0(t1) - li t2, 0xA0800041 - sw t2, EBU_ADDSEL2(t1) - li t2, 0xBE0000F1 - sw t2, EBU_ADDSEL1(t1) - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 2f - nop - b 3f - nop - - /* 100 MHz */ -1: - li t2, 0x8841417D - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684142BD - b 3f - sw t2, EBU_BUSCON1(t1) /* delay slot */ - - /* 133 or 150 MHz */ -2: - li t2, 0x8841417E - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684143FD - sw t2, EBU_BUSCON1(t1) -3: - jr ra - nop - - .end ebu_init - - -/* - * void cgu_init(long) - * - * a0 has the clock value - */ - .globl cgu_init - .ent cgu_init -cgu_init: -__cgu_init: - - li t1, CGU_MODUL_BASE - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - li t2, 0x80000014 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 133 MHz clock */ -2: - li t2, 0x80000054 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 150 MHz clock */ -3: - li t2, 0x80000017 - sw t2, CGU_DIVCR(t1) - li t2, 0xC00B0001 - sw t2, CGU_PLL1CR(t1) - li t3, 0x80000000 -4: - lw t2, CGU_PLL1SR(t1) - and t2, t2, t3 - beq t2, zero, 4b - nop - li t2, 0x80000001 - sw t2, CGU_MUXCR(t1) -5: - jr ra - nop - - .end cgu_init - - -/* - * void sdram_init(long) - * - * a0 has the clock value - */ - .globl sdram_init - .ent sdram_init -sdram_init: -__sdram_init: - - li t1, MC_MODUL_BASE - -#if 0 - /* Disable memory controller before changing any of its registers */ - sw zero, MC_CTRLENA(t1) -#endif - - li t2, 100000000 - beq a0, t2, 1f - nop - li t2, 133000000 - beq a0, t2, 2f - nop - li t2, 150000000 - beq a0, t2, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 100MHz) */ - li t2, 0x0000061A - b 4f - sw t2, MC_TREFRESH(t1) - - /* 133 MHz clock */ -2: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 133MHz) */ - li t2, 0x00000822 - b 4f - sw t2, MC_TREFRESH(t1) - - /* 150 MHz clock */ -3: - /* Set clock ratio (clkrat=3:2, rddel=4) */ - li t2, 0x00000014 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 150MHz) */ - li t2, 0x00000927 - sw t2, MC_TREFRESH(t1) - -4: - /* Clear Error log registers */ - sw zero, MC_ERRCAUSE(t1) - sw zero, MC_ERRADDR(t1) - - /* Clear Power-down registers */ - sw zero, MC_SELFRFSH(t1) - - /* Set CAS Latency */ - li t2, 0x00000020 /* CL = 2 */ - sw t2, MC_MRSCODE(t1) - - /* Set word width to 16 bit */ - li t2, 0x2 - sw t2, MC_CFGDW(t1) - - /* Set CS0 to SDRAM parameters */ - li t2, 0x000014C9 - sw t2, MC_CFGPB0(t1) - - /* Set SDRAM latency parameters */ - li t2, 0x00026325 /* BC PC100 */ - sw t2, MC_LATENCY(t1) - -5: - /* Finally enable the controller */ - li t2, 0x00000001 - sw t2, MC_CTRLENA(t1) - - jr ra - nop - - .end sdram_init - - - .globl lowlevel_init - .ent lowlevel_init -lowlevel_init: - - /* Disable Watchdog. - */ - la t9, disable_incaip_wdt - jalr t9 - nop - - /* EBU, CGU and SDRAM Initialization. - */ - li a0, CONFIG_CPU_CLOCK_RATE - move t0, ra - - /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init() - * modify t0 and a0. - */ - bal __cgu_init - nop - bal __ebu_init - nop - bal __sdram_init - nop - move ra, t0 - - jr ra - nop - - .end lowlevel_init diff --git a/boards.cfg b/boards.cfg index b4203f1..78ff526 100644 --- a/boards.cfg +++ b/boards.cfg @@ -519,10 +519,6 @@ Active mips mips32 au1x00 - dbau1x00 Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas(a)corelatus.se> Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas(a)corelatus.se> Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 - -Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd(a)denx.de> -Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd(a)denx.de> -Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd(a)denx.de> -Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd(a)denx.de> Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN - Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN - Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot(a)andestech.com> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 7d67033..32c85ad 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -114,3 +114,4 @@ PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Den PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd(a)denx.de> omap2420h4 arm omap24xx - 2013-06-04 Richard Woodruff <r-woodruff2(a)ti.com> eNET x86 x86 7e8c53d 2013-02-14 Graeme Russ <graeme.russ(a)gmail.com> +incaip mips mips32 - 2014-04-17 Wolfgang Denk <wd(a)denx.de> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7f9ce90..c25b3c9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o -obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c deleted file mode 100644 index cdfbfa6..0000000 --- a/drivers/net/inca-ip_sw.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * INCA-IP internal switch ethernet driver. - * - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <common.h> - -#include <malloc.h> -#include <net.h> -#include <netdev.h> -#include <asm/inca-ip.h> -#include <asm/addrspace.h> - - -#define NUM_RX_DESC PKTBUFSRX -#define NUM_TX_DESC 3 -#define TOUT_LOOP 1000000 - - -#define DELAY udelay(10000) - /* Sometimes the store word instruction hangs while writing to one - * of the Switch registers. Moving the instruction into a separate - * function somehow makes the problem go away. - */ -static void SWORD(volatile u32 * reg, u32 value) -{ - *reg = value; -} - -#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value; -#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg) -#define SW_WRITE_REG(reg, value) \ - SWORD(reg, value);\ - DELAY;\ - SWORD(reg, value); - -#define SW_READ_REG(reg, value) \ - value = (u32)*((volatile u32*)reg);\ - DELAY;\ - value = (u32)*((volatile u32*)reg); - -#define INCA_DMA_TX_POLLING_TIME 0x07 -#define INCA_DMA_RX_POLLING_TIME 0x07 - -#define INCA_DMA_TX_HOLD 0x80000000 -#define INCA_DMA_TX_EOP 0x40000000 -#define INCA_DMA_TX_SOP 0x20000000 -#define INCA_DMA_TX_ICPT 0x10000000 -#define INCA_DMA_TX_IEOP 0x08000000 - -#define INCA_DMA_RX_C 0x80000000 -#define INCA_DMA_RX_SOP 0x40000000 -#define INCA_DMA_RX_EOP 0x20000000 - -#define INCA_SWITCH_PHY_SPEED_10H 0x1 -#define INCA_SWITCH_PHY_SPEED_10F 0x5 -#define INCA_SWITCH_PHY_SPEED_100H 0x2 -#define INCA_SWITCH_PHY_SPEED_100F 0x6 - -/************************ Auto MDIX settings ************************/ -#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR -#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL -#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT -#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16 - -#define WAIT_SIGNAL_RETRIES 100 -#define WAIT_LINK_RETRIES 100 -#define LINK_RETRY_DELAY 2000 /* ms */ -/********************************************************************/ - -typedef struct -{ - union { - struct { - volatile u32 HOLD :1; - volatile u32 ICpt :1; - volatile u32 IEop :1; - volatile u32 offset :3; - volatile u32 reserved0 :4; - volatile u32 NFB :22; - }field; - - volatile u32 word; - }params; - - volatile u32 nextRxDescPtr; - - volatile u32 RxDataPtr; - - union { - struct { - volatile u32 C :1; - volatile u32 Sop :1; - volatile u32 Eop :1; - volatile u32 reserved3 :12; - volatile u32 NBT :17; - }field; - - volatile u32 word; - }status; - -} inca_rx_descriptor_t; - - -typedef struct -{ - union { - struct { - volatile u32 HOLD :1; - volatile u32 Eop :1; - volatile u32 Sop :1; - volatile u32 ICpt :1; - volatile u32 IEop :1; - volatile u32 reserved0 :5; - volatile u32 NBA :22; - }field; - - volatile u32 word; - }params; - - volatile u32 nextTxDescPtr; - - volatile u32 TxDataPtr; - - volatile u32 C :1; - volatile u32 reserved3 :31; - -} inca_tx_descriptor_t; - - -static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16))); -static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16))); - -static int tx_new, rx_new, tx_hold, rx_hold; -static int tx_old_hold = -1; -static int initialized = 0; - - -static int inca_switch_init(struct eth_device *dev, bd_t * bis); -static int inca_switch_send(struct eth_device *dev, void *packet, int length); -static int inca_switch_recv(struct eth_device *dev); -static void inca_switch_halt(struct eth_device *dev); -static void inca_init_switch_chip(void); -static void inca_dma_init(void); -static int inca_amdix(void); - - -int inca_switch_initialize(bd_t * bis) -{ - struct eth_device *dev; - -#if 0 - printf("Entered inca_switch_initialize()\n"); -#endif - - if (!(dev = (struct eth_device *) malloc (sizeof *dev))) { - printf("Failed to allocate memory\n"); - return 0; - } - memset(dev, 0, sizeof(*dev)); - - inca_dma_init(); - - inca_init_switch_chip(); - -#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) - inca_amdix(); -#endif - - sprintf(dev->name, "INCA-IP Switch"); - dev->init = inca_switch_init; - dev->halt = inca_switch_halt; - dev->send = inca_switch_send; - dev->recv = inca_switch_recv; - - eth_register(dev); - -#if 0 - printf("Leaving inca_switch_initialize()\n"); -#endif - - return 0; -} - - -static int inca_switch_init(struct eth_device *dev, bd_t * bis) -{ - int i; - u32 v, regValue; - u16 wTmp; - -#if 0 - printf("Entering inca_switch_init()\n"); -#endif - - /* Set MAC address. - */ - wTmp = (u16)dev->enetaddr[0]; - regValue = (wTmp << 8) | dev->enetaddr[1]; - - SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue); - - wTmp = (u16)dev->enetaddr[2]; - regValue = (wTmp << 8) | dev->enetaddr[3]; - regValue = regValue << 16; - wTmp = (u16)dev->enetaddr[4]; - regValue |= (wTmp<<8) | dev->enetaddr[5]; - - SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue); - - /* Initialize the descriptor rings. - */ - for (i = 0; i < NUM_RX_DESC; i++) { - inca_rx_descriptor_t * rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[i]); - memset(rx_desc, 0, sizeof(rx_ring[i])); - - /* Set maximum size of receive buffer. - */ - rx_desc->params.field.NFB = PKTSIZE_ALIGN; - - /* Set the offset of the receive buffer. Zero means - * that the offset mechanism is not used. - */ - rx_desc->params.field.offset = 0; - - /* Check if it is the last descriptor. - */ - if (i == (NUM_RX_DESC - 1)) { - /* Let the last descriptor point to the first - * one. - */ - rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(rx_ring); - } else { - /* Set the address of the next descriptor. - */ - rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(&rx_ring[i+1]); - } - - rx_desc->RxDataPtr = (u32)CKSEG1ADDR(NetRxPackets[i]); - } - -#if 0 - printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]); - printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]); -#endif - - for (i = 0; i < NUM_TX_DESC; i++) { - inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[i]); - - memset(tx_desc, 0, sizeof(tx_ring[i])); - - tx_desc->params.word = 0; - tx_desc->params.field.HOLD = 1; - tx_desc->C = 1; - - /* Check if it is the last descriptor. - */ - if (i == (NUM_TX_DESC - 1)) { - /* Let the last descriptor point to the - * first one. - */ - tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(tx_ring); - } else { - /* Set the address of the next descriptor. - */ - tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(&tx_ring[i+1]); - } - } - - /* Initialize RxDMA. - */ - DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v); - debug("RX status = 0x%08X\n", v); - - /* Writing to the FRDA of CHANNEL. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring); - - /* Writing to the COMMAND REG. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT); - - /* Initialize TxDMA. - */ - DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v); - debug("TX status = 0x%08X\n", v); - - /* Writing to the FRDA of CHANNEL. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring); - - tx_new = rx_new = 0; - - tx_hold = NUM_TX_DESC - 1; - rx_hold = NUM_RX_DESC - 1; - -#if 0 - rx_ring[rx_hold].params.field.HOLD = 1; -#endif - /* enable spanning tree forwarding, enable the CPU port */ - /* ST_PT: - * CPS (CPU port status) 0x3 (forwarding) - * LPS (LAN port status) 0x3 (forwarding) - * PPS (PC port status) 0x3 (forwarding) - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f); - -#if 0 - printf("Leaving inca_switch_init()\n"); -#endif - - return 0; -} - - -static int inca_switch_send(struct eth_device *dev, void *packet, int length) -{ - int i; - int res = -1; - u32 command; - u32 regValue; - inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_new]); - -#if 0 - printf("Entered inca_switch_send()\n"); -#endif - - if (length <= 0) { - printf ("%s: bad packet size: %d\n", dev->name, length); - goto Done; - } - - for(i = 0; tx_desc->C == 0; i++) { - if (i >= TOUT_LOOP) { - printf("%s: tx error buffer not ready\n", dev->name); - goto Done; - } - } - - if (tx_old_hold >= 0) { - ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_old_hold]))->params.field.HOLD = 1; - } - tx_old_hold = tx_hold; - - tx_desc->params.word = - (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD); - - tx_desc->C = 0; - tx_desc->TxDataPtr = (u32)packet; - tx_desc->params.field.NBA = length; - - ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->params.field.HOLD = 0; - - tx_hold = tx_new; - tx_new = (tx_new + 1) % NUM_TX_DESC; - - - if (! initialized) { - command = INCA_IP_DMA_DMA_TXCCR0_INIT; - initialized = 1; - } else { - command = INCA_IP_DMA_DMA_TXCCR0_HR; - } - - DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); - regValue |= command; -#if 0 - printf("regValue = 0x%x\n", regValue); -#endif - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); - -#if 1 - for(i = 0; ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->C == 0; i++) { - if (i >= TOUT_LOOP) { - printf("%s: tx buffer not ready\n", dev->name); - goto Done; - } - } -#endif - res = length; -Done: -#if 0 - printf("Leaving inca_switch_send()\n"); -#endif - return res; -} - - -static int inca_switch_recv(struct eth_device *dev) -{ - int length = 0; - inca_rx_descriptor_t * rx_desc; - -#if 0 - printf("Entered inca_switch_recv()\n"); -#endif - - for (;;) { - rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_new]); - - if (rx_desc->status.field.C == 0) { - break; - } - -#if 0 - rx_ring[rx_new].params.field.HOLD = 1; -#endif - - if (! rx_desc->status.field.Eop) { - printf("Partly received packet!!!\n"); - break; - } - - length = rx_desc->status.field.NBT; - rx_desc->status.word &= - ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C); -#if 0 -{ - int i; - for (i=0;i<length - 4;i++) { - if (i % 16 == 0) printf("\n%04x: ", i); - printf("%02X ", NetRxPackets[rx_new][i]); - } - printf("\n"); -} -#endif - - if (length) { -#if 0 - printf("Received %d bytes\n", length); -#endif - NetReceive((void*)CKSEG1ADDR(NetRxPackets[rx_new]), length - 4); - } else { -#if 1 - printf("Zero length!!!\n"); -#endif - } - - - ((inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_hold]))->params.field.HOLD = 0; - - rx_hold = rx_new; - - rx_new = (rx_new + 1) % NUM_RX_DESC; - } - -#if 0 - printf("Leaving inca_switch_recv()\n"); -#endif - - return length; -} - - -static void inca_switch_halt(struct eth_device *dev) -{ -#if 0 - printf("Entered inca_switch_halt()\n"); -#endif - -#if 1 - initialized = 0; -#endif -#if 1 - /* Disable forwarding to the CPU port. - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); - - /* Close RxDMA channel. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - - /* Close TxDMA channel. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF); - - -#endif -#if 0 - printf("Leaving inca_switch_halt()\n"); -#endif -} - - -static void inca_init_switch_chip(void) -{ - u32 regValue; - - /* To workaround a problem with collision counter - * (see Errata sheet). - */ - SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001); - SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001); - -#if 1 - /* init MDIO configuration: - * MDS (Poll speed): 0x01 (4ms) - * PHY_LAN_ADDR: 0x06 - * PHY_PC_ADDR: 0x05 - * UEP (Use External PHY): 0x00 (Internal PHY is used) - * PS (Port Select): 0x00 (PT/UMM for LAN) - * PT (PHY Test): 0x00 (no test mode) - * UMM (Use MDIO Mode): 0x00 (state machine is disabled) - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50); - - /* init PHY: - * SL (Auto Neg. Speed for LAN) - * SP (Auto Neg. Speed for PC) - * LL (Link Status for LAN) - * LP (Link Status for PC) - * DL (Duplex Status for LAN) - * DP (Duplex Status for PC) - * PL (Auto Neg. Pause Status for LAN) - * PP (Auto Neg. Pause Status for PC) - */ - SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff); - - /* MDIO_ACC: - * RA (Request/Ack) 0x01 (Request) - * RW (Read/Write) 0x01 (Write) - * PHY_ADDR 0x05 (PC) - * REG_ADDR 0x00 (PHY_BCR: basic control register) - * PHY_DATA 0x8000 - * Reset - software reset - * LB (loop back) - normal - * SS (speed select) - 10 Mbit/s - * ANE (auto neg. enable) - enable - * PD (power down) - normal - * ISO (isolate) - normal - * RAN (restart auto neg.) - normal - * DM (duplex mode) - half duplex - * CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000); - - /* MDIO_ACC: - * RA (Request/Ack) 0x01 (Request) - * RW (Read/Write) 0x01 (Write) - * PHY_ADDR 0x06 (LAN) - * REG_ADDR 0x00 (PHY_BCR: basic control register) - * PHY_DATA 0x8000 - * Reset - software reset - * LB (loop back) - normal - * SS (speed select) - 10 Mbit/s - * ANE (auto neg. enable) - enable - * PD (power down) - normal - * ISO (isolate) - normal - * RAN (restart auto neg.) - normal - * DM (duplex mode) - half duplex - * CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000); - -#endif - - /* Make sure the CPU port is disabled for now. We - * don't want packets to get stacked for us until - * we enable DMA and are prepared to receive them. - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); - - SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue); - - /* CRC GEN is enabled. - */ - regValue |= 0x00000200; - SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue); - - /* ADD TAG is disabled. - */ - SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); - regValue &= ~0x00000002; - SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); -} - - -static void inca_dma_init(void) -{ - /* Switch off all DMA channels. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF); - - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF); - - /* Setup TX channel polling time. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME); - - /* Setup RX channel polling time. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME); - - /* ERRATA: write reset value into the DMA RX IMR register. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF); - - /* Just in case: disable all transmit interrupts also. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF); - - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF); -} - -#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) -static int inca_amdix(void) -{ - u32 phyReg1 = 0; - u32 phyReg4 = 0; - u32 phyReg5 = 0; - u32 phyReg6 = 0; - u32 phyReg31 = 0; - u32 regEphy = 0; - int mdi_flag; - int retries; - - /* Setup GPIO pins. - */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - -#if 0 - /* Wait for signal. - */ - retries = WAIT_SIGNAL_RETRIES; - while (--retries) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (17 << 16)); /* PHY_MCSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - if (phyReg1 & (1 << 1)) { - /* Signal detected */ - break; - } - } - - if (!retries) - goto Fail; -#endif - - /* Set MDI mode. - */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 1; - - /* Wait for link. - */ - retries = WAIT_LINK_RETRIES; - while (--retries) { - udelay(LINK_RETRY_DELAY * 1000); - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (1 << 16)); /* PHY_BSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - if (phyReg1 & (1 << 2)) { - /* Link is up */ - break; - } else if (mdi_flag) { - /* Set MDIX mode */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 0; - } else { - /* Set MDI mode */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 1; - } - } - - if (!retries) { - goto Fail; - } else { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (1 << 16)); /* PHY_BSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - /* Auto-negotiation / Parallel detection complete - */ - if (phyReg1 & (1 << 5)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (31 << 16)); /* PHY_SCSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31); - } while (phyReg31 & (1 << 31)); - - switch ((phyReg31 >> 2) & 0x7) { - case INCA_SWITCH_PHY_SPEED_10H: - /* 10Base-T Half-duplex */ - regEphy = 0; - break; - case INCA_SWITCH_PHY_SPEED_10F: - /* 10Base-T Full-duplex */ - regEphy = INCA_IP_Switch_EPHY_DL; - break; - case INCA_SWITCH_PHY_SPEED_100H: - /* 100Base-TX Half-duplex */ - regEphy = INCA_IP_Switch_EPHY_SL; - break; - case INCA_SWITCH_PHY_SPEED_100F: - /* 100Base-TX Full-duplex */ - regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL; - break; - } - - /* In case of Auto-negotiation, - * update the negotiated PAUSE support status - */ - if (phyReg1 & (1 << 3)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (6 << 16)); /* MII_EXPANSION */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6); - } while (phyReg6 & (1 << 31)); - - /* We are Autoneg-able. - * Is Link partner also able to autoneg? - */ - if (phyReg6 & (1 << 0)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (4 << 16)); /* MII_ADVERTISE */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4); - } while (phyReg4 & (1 << 31)); - - /* We advertise PAUSE capab. - * Does link partner also advertise it? - */ - if (phyReg4 & (1 << 10)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (5 << 16)); /* MII_LPA */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5); - } while (phyReg5 & (1 << 31)); - - /* Link partner is PAUSE capab. - */ - if (phyReg5 & (1 << 10)) { - regEphy |= INCA_IP_Switch_EPHY_PL; - } - } - } - - } - - /* Link is up */ - regEphy |= INCA_IP_Switch_EPHY_LL; - - SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy); - } - } - - return 0; - -Fail: - printf("No Link on LAN port\n"); - return -1; -} -#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */ diff --git a/include/common.h b/include/common.h index cbd3c9e..f77273e 100644 --- a/include/common.h +++ b/include/common.h @@ -692,9 +692,6 @@ ulong get_UCLK (void); #if defined(CONFIG_LH7A40X) ulong get_PLLCLK (void); #endif -#if defined CONFIG_INCA_IP -uint incaip_get_cpuclk (void); -#endif #if defined(CONFIG_IMX) ulong get_systemPLLCLK(void); ulong get_FCLK(void); diff --git a/include/configs/incaip.h b/include/configs/incaip.h deleted file mode 100644 index e11d184..0000000 --- a/include/configs/incaip.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file contains the configuration parameters for the INCA-IP board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */ - -#define CONFIG_XWAY_SWAP_BYTES - -/* - * Clock for the MIPS core (MHz) - * allowed values: 100000000, 133000000, and 150000000 (default) - */ -#ifndef CONFIG_CPU_CLOCK_RATE -#define CONFIG_CPU_CLOCK_RATE 150000000 -#endif - -#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "ethaddr=${ethaddr} " \ - "panic=1\0" \ - "flash_nfs=run nfsargs addip addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 80500000 ${bootfile};" \ - "run nfsargs addip addmisc;bootm\0" \ - "rootpath=/opt/eldk/mips_4KC\0" \ - "bootfile=/tftpboot/INCA/uImage\0" \ - "kernel_addr=B0040000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=/tftpboot/INCA/u-boot.bin\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "update=protect off 1:0-2;era 1:0-2;" \ - "cp.b 80500000 B0000000 ${filesize}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "INCA-IP # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0030000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_INCA_IP_SWITCH -#define CONFIG_INCA_IP_SWITCH_AMDIX - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, use all space on the device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0" -#define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \ - "64k(env)," \ - "768k(linux)," \ - "1m@3m(rootfs)," \ - "768k(linux2)," \ - "3m@5m(rootfs2)" -*/ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 4096 -#define CONFIG_SYS_ICACHE_SIZE 4096 -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#endif /* __CONFIG_H */ diff --git a/include/netdev.h b/include/netdev.h index 32b5073..e211f18 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -54,7 +54,6 @@ int ftmac100_initialize(bd_t *bits); int ftmac110_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); -int inca_switch_initialize(bd_t *bis); int ks8695_eth_initialize(void); int ks8851_mll_initialize(u8 dev_num, int base_addr); int lan91c96_initialize(u8 dev_num, int base_addr); -- 1.8.3.2

1 0

[U-Boot] Updating master with next
by Tom Rini 17 Apr '14

17 Apr '14

I've now merged next into master and pushed, along with re-applying the change that makes non-COFNIG_SYS_GENERIC_BOARD boards complain at run-time. I'm going to be grabbing some other patches shortly, of the type that easily conflict and I don't want to have to have them be rebased again. -- Tom

1 0

[U-Boot] [PATCH] mmc: Handle switch error status bit in MMC card status
by Andrew Gabbasov 17 Apr '14

17 Apr '14

MMC switch command for unsupported feature (e.g. bus width) sets a switch error bit in card status. This bit should be checked, and, if it's set, no access with new controller settings should be performed. Signed-off-by: Andrew Gabbasov <andrew_gabbasov(a)mentor.com> --- drivers/mmc/mmc.c | 4 +++- include/mmc.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 8ab0bc9..16105bc 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -155,6 +155,8 @@ int mmc_send_status(struct mmc *mmc, int timeout) #endif return TIMEOUT; } + if (cmd.response[0] & MMC_STATUS_SWITCH_ERROR) + return SWITCH_ERR; return 0; } @@ -505,7 +507,7 @@ static int mmc_change_freq(struct mmc *mmc) err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); if (err) - return err; + return ((err == SWITCH_ERR) ? 0 : err); /* Now check to see that it worked */ err = mmc_send_ext_csd(mmc, ext_csd); diff --git a/include/mmc.h b/include/mmc.h index e95a237..d5833f8 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -53,6 +53,7 @@ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 #define IN_PROGRESS -20 /* operation is in progress */ +#define SWITCH_ERR -21 /* Card reports failure to switch mode */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -108,6 +109,7 @@ #define SECURE_ERASE 0x80000000 #define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_SWITCH_ERROR (1 << 7) #define MMC_STATUS_RDY_FOR_DATA (1 << 8) #define MMC_STATUS_CURR_STATE (0xf << 9) #define MMC_STATUS_ERROR (1 << 19) -- 1.7.10.4

3 3

[U-Boot] [PATCH v6 0/4] Exynos5: Add GPIO numbering feature
by Akshay Saraswat 17 Apr '14

17 Apr '14

From: Akshay Saraswat <akshay.s(a)samsung.com> Changes in V2: - Enabled CMD_GPIO as suggested by Simon Glass and supported same for EXYNOS5. Changes in V3: - New patch added to rename S5P GPIO definitions to S5P_GPIO. - GPIO Table added to calculate the base address of input gpio bank. Changes in V4: - To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. - Function and table to support gpio command moved to s5p-gpio driver. - Rebased on latest u-boot-samsung tree. Changes in V5: - Rebased on latest u-boot-samsung tree. - Removed Exynos5 specific code in gpio driver api to get bank. - Added #define HAVE_GENERIC_GPIO in config file to remove conditinal CPU check in gpio driver. Changes in V6: - Isolated config changes in a new patch. - Updated patches with corresponding changes for Exynos 5420. Rajeshwari Shinde (4): S5P: Rename GPIO definitions EXYNOS5: Add gpio pin numbering feature EXYNOS5: GPIO: Support GPIO Command for EXYNOS5 Config: Exynos5: Enable Generic GPIO and CMD configs arch/arm/cpu/armv7/exynos/pinmux.c | 355 ++++++-------- arch/arm/include/asm/arch-exynos/cpu.h | 17 +- arch/arm/include/asm/arch-exynos/gpio.h | 796 ++++++++++++++++++++++++++++++- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 26 +- board/samsung/goni/goni.c | 4 +- board/samsung/smdk5250/exynos5-dt.c | 20 +- board/samsung/smdk5250/smdk5250.c | 19 +- board/samsung/smdk5420/smdk5420.c | 15 +- board/samsung/smdkc100/smdkc100.c | 2 +- board/samsung/smdkv310/smdkv310.c | 10 +- board/samsung/trats/trats.c | 6 +- board/samsung/universal_c210/universal.c | 34 +- drivers/gpio/s5p_gpio.c | 169 ++++++- include/configs/exynos5-dt.h | 3 + 14 files changed, 1157 insertions(+), 319 deletions(-) -- 1.8.3.2

5 18

[U-Boot] FSL eSPI driver is a mess, hack attached.
by Joakim Tjernlund 17 Apr '14

17 Apr '14

The fsl_espi.c is wreck w.r.t large TX data. Below is what I had to hack to load a FPGA over SPI and what is the malloc hack good for? This does not work well for TXing several MB data. The driver needs to be rewritten and I do not have the time so I post what I got in the hope it can help someone else or trigger a rewrite. --- drivers/spi/fsl_espi.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index 7c84582..2843a8e 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -28,8 +28,9 @@ struct fsl_spi_slave { #define ESPI_MAX_CS_NUM 4 -#define ESPI_EV_RNE (1 << 9) -#define ESPI_EV_TNF (1 << 8) +#define ESPI_EV_DON (1 << (31 - 17)) +#define ESPI_EV_RNE (1 << (31 - 22)) +#define ESPI_EV_TNF (1 << (31 - 23)) #define ESPI_MODE_EN (1 << 31) /* Enable interface */ #define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ @@ -37,6 +38,8 @@ struct fsl_spi_slave { #define ESPI_COM_CS(x) ((x) << 30) #define ESPI_COM_TRANLEN(x) ((x) << 0) +#define ESPI_COM_TO (1 << (31 - 4)) + #define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31) #define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30) @@ -146,8 +149,9 @@ int spi_claim_bus(struct spi_slave *slave) | ESPI_CSMODE_CI_INACTIVEHIGH); /* Character bit order: msb first */ - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) - | ESPI_CSMODE_REV_MSB_FIRST); + if (!(mode & SPI_LSB_FIRST)) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_REV_MSB_FIRST); /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) @@ -172,7 +176,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, int len = 0; int num_blks, num_chunks, max_tran_len, tran_len; int num_bytes; - unsigned char *ch; + //unsigned char *ch; unsigned char *buffer = NULL; size_t buf_len; u8 *cmd_buf = fsl->cmd_buf; @@ -216,20 +220,21 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, cmd_len = 0; break; } - + dout = data_out; debug("spi_xfer: slave %u:%u dout %08X(%p) din %08X(%p) len %u\n", slave->bus, slave->cs, *(uint *) dout, dout, *(uint *) din, din, len); num_chunks = DIV_ROUND_UP(data_len, max_tran_len); + dout = buffer; while (num_chunks--) { if (data_in) din = buffer + rx_offset; - dout = buffer; tran_len = min(data_len , max_tran_len); num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); num_bytes = (tran_len + cmd_len) % 4; fsl->data_len = tran_len + cmd_len; + data_len -= tran_len; spi_cs_activate(slave); /* Clear all eSPI events */ @@ -253,11 +258,12 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, } /* Wait for eSPI transmit to get out */ - udelay(80); + udelay(5); event = in_be32(&espi->event); if (event & ESPI_EV_RNE) { tmpdin = in_be32(&espi->rx); +#if 0 if (num_blks == 0 && num_bytes != 0) { ch = (unsigned char *)&tmpdin; while (num_bytes--) @@ -266,7 +272,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, *(u32 *) din = tmpdin; din += 4; } - +#endif out_be32(&espi->event, in_be32(&espi->event) | ESPI_EV_RNE); debug("***spi_xfer:...%08x readed\n", tmpdin); @@ -301,6 +307,7 @@ void spi_cs_activate(struct spi_slave *slave) com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); com |= ESPI_COM_CS(slave->cs); + com |= ESPI_COM_TO; com |= ESPI_COM_TRANLEN(data_len - 1); out_be32(&espi->com, com); } -- 1.8.3.2

5 5

[U-Boot] ocotp
by Nogradi Peter 16 Apr '14

16 Apr '14

Hi, we have a m28evk custom board from Fa. Denx, (ELDK 5.4) it worked properly, until I wrote a word with u-boot fuse prog. fuse prog 0 4 1 (it was my mistake, i wanted to test the fuse prog to the customer area (for example: fuse prog 0 2 1) Until fuse prog I can't boot. (Neither SDcard nor NAND flash) I get only the message 0x50801006 What can I do now, and theoretically where can I write data (I know only once) for example serial number, etc Thanks in advance and best regards Peter Nogradi

1 0

Re: [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions
by Akshay Saraswat 16 Apr '14

16 Apr '14

Dear Jaehoon Chung, >Hi, Akshay. > >Did you test exynos4 board? >I have tested your patch-set with the exynos4 board(TRATS2). >It didn't work. > No, I didn't test it over Exynos4 boards. I don't have any working. Thanks for testing. :-) > >Occurred DATA_ABORT. >gpio_set_pull(EXYNOS4x12_GPIO_X15,...); > >Add the comment at below. > >On 04/16/2014 02:32 PM, Akshay Saraswat wrote: >> This patch includes following changes : >> * Adds gpio pin numbering support for EXYNOS SOCs. >> To have consistent 0..n-1 GPIO numbering the banks are divided >> into different parts where ever they have holes in them. >> >> * Rename GPIO definitions from GPIO_... to S5P_GPIO_... >> These changes were done to enable cmd_gpio for EXYNOS and >> cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence >> getting a error during compilation. >> >> * Adds support for name to gpio conversion in s5p_gpio to enable >> gpio command EXYNOS SoCs. Function has been added to asm/gpio.h >> to decode the input gpio name to gpio number. >> Example: SMDK5420 # gpio set gpa00 >> >> Signed-off-by: Leela Krishna Amudala <l.krishna(a)samsung.com> >> Signed-off-by: Rajeshwari Shinde <rajeshwari.s(a)samsung.com> >> Signed-off-by: Akshay Saraswat <akshay.s(a)samsung.com> >> --- >> arch/arm/cpu/armv7/exynos/pinmux.c | 403 +++---- >> arch/arm/include/asm/arch-exynos/cpu.h | 17 +- >> arch/arm/include/asm/arch-exynos/gpio.h | 1778 +++++++++++++++++++++++++----- >> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 941 +++++++++++++--- >> board/samsung/arndale/arndale.c | 11 +- >> board/samsung/goni/goni.c | 26 +- >> board/samsung/smdk5250/exynos5-dt.c | 20 +- >> board/samsung/smdk5250/smdk5250.c | 19 +- >> board/samsung/smdk5420/smdk5420.c | 15 +- >> board/samsung/smdkc100/smdkc100.c | 5 +- >> board/samsung/smdkv310/smdkv310.c | 17 +- >> board/samsung/trats/trats.c | 39 +- >> board/samsung/trats2/trats2.c | 74 +- >> board/samsung/universal_c210/universal.c | 51 +- >> drivers/gpio/s5p_gpio.c | 194 +++- >> 15 files changed, 2779 insertions(+), 831 deletions(-) >> >> diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c >> index 9edb475..e26eb51 100644 >> --- a/arch/arm/cpu/armv7/exynos/pinmux.c >> +++ b/arch/arm/cpu/armv7/exynos/pinmux.c >> @@ -13,30 +13,23 @@ > >[..snip..] > >> - >> +#if 0 >> /* functions */ >> void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); >> void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); >> @@ -244,6 +29,7 @@ unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio); >> void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); >> void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); >> void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); >> +#endif > >Why did you use the "#if 0 ~ #endif". >If it didn't need to use, it can be removed, isn't? > Apologies, missed it while cleanup. Will remove it. > >Best Regards, >Jaehoon Chung > Regards, Akshay Saraswat

3 3

Re: [U-Boot] [PATCH v8 1/2] S5P: Exynos: Add GPIO pin numbering and rename definitions
by Akshay Saraswat 16 Apr '14

16 Apr '14

Thanks for testing. Please read inline replies. >Hello Akshay, > 04/16/2014 07:32 AM, Akshay Saraswat wrote: >> This patch includes following changes : >> * Adds gpio pin numbering support for EXYNOS SOCs. >> To have consistent 0..n-1 GPIO numbering the banks are divided >> into different parts where ever they have holes in them. >> >> * Rename GPIO definitions from GPIO_... to S5P_GPIO_... >> These changes were done to enable cmd_gpio for EXYNOS and >> cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence >> getting a error during compilation. >> >> * Adds support for name to gpio conversion in s5p_gpio to enable >> gpio command EXYNOS SoCs. Function has been added to asm/gpio.h >> to decode the input gpio name to gpio number. >> Example: SMDK5420 # gpio set gpa00 >> >> Signed-off-by: Leela Krishna Amudala <l.krishna(a)samsung.com> >> Signed-off-by: Rajeshwari Shinde <rajeshwari.s(a)samsung.com> >> Signed-off-by: Akshay Saraswat <akshay.s(a)samsung.com> >> --- >> arch/arm/cpu/armv7/exynos/pinmux.c | 403 +++---- >> arch/arm/include/asm/arch-exynos/cpu.h | 17 +- >> arch/arm/include/asm/arch-exynos/gpio.h | 1778 +++++++++++++++++++++++++----- >> arch/arm/include/asm/arch-s5pc1xx/gpio.h | 941 +++++++++++++--- >> board/samsung/arndale/arndale.c | 11 +- >> board/samsung/goni/goni.c | 26 +- >> board/samsung/smdk5250/exynos5-dt.c | 20 +- >> board/samsung/smdk5250/smdk5250.c | 19 +- >> board/samsung/smdk5420/smdk5420.c | 15 +- >> board/samsung/smdkc100/smdkc100.c | 5 +- >> board/samsung/smdkv310/smdkv310.c | 17 +- >> board/samsung/trats/trats.c | 39 +- >> board/samsung/trats2/trats2.c | 74 +- >> board/samsung/universal_c210/universal.c | 51 +- >> drivers/gpio/s5p_gpio.c | 194 +++- >> 15 files changed, 2779 insertions(+), 831 deletions(-) >> >> > >You introduced new method for gpio numbering and I don't know why are >you using macro like this: >"exynos_gpio_get(2, EXYNOS4X12_GPIO_X33)" >and also new style like only "EXYNOS4X12_GPIO_X33". > Even I was wondering why such a macro lies in config file. But i2c driver is looking for it, so had to modify and keep it. > >Those are two different numbers and can't be given to s5p_gpio driver >which interprets only new gpio numbering method. >This code can't work properly. > Since, sequential pin number to bank+pin generation is same everywhere, I thought it's ok to just replace it. Probably the enum mapping has faults. Need to recalculate. > >Please remove old macros and use only proper gpio enum in boards config >files. >We don't need any "get" macro if all gpio numbers are defined explicitly. > >You should also modify proper dts files in arch/arm/dts/* . > > >I tested your changes with enums only and after change proper dts file >for trats2 there is still data abort. >So this means that probably enums are not mapped correctly to proper >gpio bank addresses. > >Do you have an documentation for Exynos4 socs? > >I think that this should be checked again with documentation and >compiled next to the current code which is simple and just works. > >There are also some warnings when checking by checkpatch script. > Sure, will fix it. :-) > >Thanks >-- >Przemyslaw Marczak >Samsung R&D Institute Poland >Samsung Electronics >p.marczak(a)samsung.com > Regards, Akshay Saraswat

2 1

[U-Boot] [PATCH v8 0/2] Exynos5: Add GPIO numbering feature
by Akshay Saraswat 16 Apr '14

16 Apr '14

Did ./MAKEALL -a arm and found all Exynos/S5P related boards compiled successfully. Couldn't test booting over all of them. Tested U-Boot bootup over SMDK5420, SMDK5250, Snow. Requesting maintaners to test once over affected SoCs/boards. Changes in V2: - Enabled CMD_GPIO as suggested by Simon Glass and supported same for EXYNOS5. Changes in V3: - New patch added to rename S5P GPIO definitions to S5P_GPIO. - GPIO Table added to calculate the base address of input gpio bank. Changes in V4: - To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. - Function and table to support gpio command moved to s5p-gpio driver. - Rebased on latest u-boot-samsung tree. Changes in V5: - Rebased on latest u-boot-samsung tree. - Removed Exynos5 specific code in gpio driver api to get bank. - Added #define HAVE_GENERIC_GPIO in config file to remove conditinal CPU check in gpio driver. Changes in V6: - Isolated config changes in a new patch. - Updated patches with corresponding changes for Exynos 5420. Changes in V7: - Added changes for other SoCs like Exynos 4412, 4210 etc. Changes in V8: - Changed Subject of patch 2/2 to reflect affected SoCs/boards. - Fixed arndale board compile time errors introduced due to patch-set v7. Akshay Saraswat (2): S5P: Exynos: Add GPIO pin numbering and rename definitions S5P: Exynos: Config: Enable Generic GPIO and CMD configs arch/arm/cpu/armv7/exynos/pinmux.c | 403 +++---- arch/arm/include/asm/arch-exynos/cpu.h | 17 +- arch/arm/include/asm/arch-exynos/gpio.h | 1778 +++++++++++++++++++++++++----- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 941 +++++++++++++--- board/samsung/arndale/arndale.c | 11 +- board/samsung/goni/goni.c | 26 +- board/samsung/smdk5250/exynos5-dt.c | 20 +- board/samsung/smdk5250/smdk5250.c | 19 +- board/samsung/smdk5420/smdk5420.c | 15 +- board/samsung/smdkc100/smdkc100.c | 5 +- board/samsung/smdkv310/smdkv310.c | 17 +- board/samsung/trats/trats.c | 39 +- board/samsung/trats2/trats2.c | 74 +- board/samsung/universal_c210/universal.c | 51 +- drivers/gpio/s5p_gpio.c | 194 +++- include/configs/arndale.h | 1 + include/configs/exynos5-dt.h | 3 + include/configs/origen.h | 1 + include/configs/s5p_goni.h | 5 +- include/configs/s5pc210_universal.h | 17 +- include/configs/smdkc100.h | 1 + include/configs/smdkv310.h | 2 + include/configs/trats.h | 9 +- include/configs/trats2.h | 5 +- 24 files changed, 2807 insertions(+), 847 deletions(-) -- 1.8.3.2

3 4

[U-Boot] Interrupt autoboot by GPIO
by Florian Meier 16 Apr '14

16 Apr '14

Hi, is there a possibility to interrupt autoboot when a GPIO pin has a certain value? I know there is CONFIG_AUTOBOOT_DELAY_STR and that should suffice in most cases when there is another peripheral connected to the UART, but think about the following setup I have: A processor (in my case a AR9331) has a single UART that is used as U-Boot console. The same UART is connected to a radio transceiver. Therefore, an attacker MIGHT send the CONFIG_AUTOBOOT_DELAY_STR to the radio transceiver at the right time to insert malicious code. I know, there are other possibilities to handle this (e.g. by ensuring that the radio transceiver is only activated when the processor is booted), but I think having a dedicated "interrupt autoboot"-button would be an elegant solution. What do you think? Greetings, Florian

2 2