December 2014 - U-Boot

[U-Boot] [PATCH] drivers: usb: fsl: Check USB Erratum A007792 applicability
by Nikhil Badola 11 Dec '14

11 Dec '14

Check USB Erratum A007792 applicability. If applicable, add corresponding property in the device tree via device tree fixup Signed-off-by: Nikhil Badola <nikhil.badola(a)freescale.com> --- Depends on http://patchwork.ozlabs.org/patch/400407/ drivers/usb/host/ehci-fsl.c | 9 +++++++++ include/fsl_usb.h | 23 +++++++++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 61cd168..5d4288d 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -262,6 +262,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) static const char * const phys[] = { "ulpi", "utmi" }; int usb_erratum_a006261_off = -1; int usb_erratum_a007075_off = -1; + int usb_erratum_a007792_off = -1; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; @@ -332,6 +333,14 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) if (usb_erratum_a007075_off < 0) return; } + if (has_erratum_a007792()) { + usb_erratum_a007792_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a007792", + usb_erratum_a007792_off); + if (usb_erratum_a007792_off < 0) + return; + } } } #endif diff --git a/include/fsl_usb.h b/include/fsl_usb.h index e4902aa..d251f5d 100644 --- a/include/fsl_usb.h +++ b/include/fsl_usb.h @@ -145,6 +145,25 @@ static inline bool has_erratum_a007798(void) return SVR_SOC_VER(get_svr()) == SVR_T4240 && IS_SVR_REV(get_svr(), 2, 0); } + +static inline bool has_erratum_a007792(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { + case SVR_T4240: + case SVR_T4160: + return IS_SVR_REV(svr, 2, 0); + case SVR_T1040: + return IS_SVR_REV(svr, 1, 0); + case SVR_T2080: + case SVR_T2081: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); + } + return false; +} + #else static inline bool has_erratum_a006261(void) { @@ -161,5 +180,9 @@ static inline bool has_erratum_a007798(void) return false; } +static inline bool has_erratum_a007792(void) +{ + return false; +} #endif #endif /*_ASM_FSL_USB_H_ */ -- 1.7.11.7

2 1

[U-Boot] [PATCH 3/3] drivers: usb: fsl: Add USB device-tree errata framework
by Nikhil Badola 11 Dec '14

11 Dec '14

Add a new framework for fsl usb erratum handling to standardize erratum checking only inside Uboot. Information to kernel is passed via a boolean property corresponding to erratum, hence eliminating need for code duplication inside kernel Signed-off-by: Ramneek Mehresh <ramneek.mehresh(a)freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola(a)freescale.com> --- drivers/usb/host/ehci-fsl.c | 64 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 295250a..c125e2c 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -208,10 +208,57 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, return node_offset; } +static const char *fdt_usb_get_node_type(void *blob, int start_offset, + int *node_offset) +{ + const char *compat_dr = "fsl-usb2-dr"; + const char *compat_mph = "fsl-usb2-mph"; + const char *node_type = NULL; + + *node_offset = fdt_node_offset_by_compatible(blob, start_offset, + compat_mph); + if (*node_offset < 0) { + *node_offset = fdt_node_offset_by_compatible(blob, + start_offset, + compat_dr); + if (*node_offset < 0) { + printf("ERROR: could not find compatible node: %s\n", + fdt_strerror(*node_offset)); + } else { + node_type = compat_dr; + } + } else { + node_type = compat_mph; + } + + return node_type; +} + +static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum, + int start_offset) +{ + int node_offset, err; + const char *node_type = NULL; + + node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset); + if (!node_type) + return -1; + + err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0); + if (err < 0) { + printf("ERROR: could not set %s for %s: %s.\n", + prop_erratum, node_type, fdt_strerror(err)); + } + + return node_offset; +} + void fdt_fixup_dr_usb(void *blob, bd_t *bd) { static const char * const modes[] = { "host", "peripheral", "otg" }; static const char * const phys[] = { "ulpi", "utmi" }; + int usb_erratum_a006261_off = -1; + int usb_erratum_a007075_off = -1; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; @@ -265,6 +312,23 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) if (usb_phy_off < 0) return; + + if (has_erratum_a006261()) { + usb_erratum_a006261_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a006261", + usb_erratum_a006261_off); + if (usb_erratum_a006261_off < 0) + return; + } + if (has_erratum_a007075()) { + usb_erratum_a007075_off = fdt_fixup_usb_erratum + (blob, + "fsl,usb-erratum-a007075", + usb_erratum_a007075_off); + if (usb_erratum_a007075_off < 0) + return; + } } } #endif -- 1.7.11.7

2 1

[U-Boot] [PATCH 2/3][v2] drivers: usb: Make usb device-tree fixup code architecture independent
by Nikhil Badola 11 Dec '14

11 Dec '14

move usb device tree fixup code from "arch/powerpc/" to "drivers/usb/" so that it works independent of architecture it is running on Signed-off-by: Ramneek Mehresh <ramneek.mehresh(a)freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola(a)freescale.com> --- Changes for v2 : - Fixed compilation error for Platforms with CONFIG_USB_MAX_CONTROLLER_COUNT not defined - Depends on https://patchwork.ozlabs.org/patch/401063/ arch/powerpc/cpu/mpc8xxx/fdt.c | 104 ------------------------------------- drivers/usb/host/ehci-fsl.c | 113 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+), 104 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 4cec5e1..65fde3f 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -73,110 +73,6 @@ void ft_fixup_num_cores(void *blob) { } #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, - const char *phy_type, int start_offset) -{ - const char *compat_dr = "fsl-usb2-dr"; - const char *compat_mph = "fsl-usb2-mph"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - const char *node_type = NULL; - int node_offset; - int err; - - node_offset = fdt_node_offset_by_compatible(blob, - start_offset, compat_mph); - if (node_offset < 0) { - node_offset = fdt_node_offset_by_compatible(blob, - start_offset, compat_dr); - if (node_offset < 0) { - printf("WARNING: could not find compatible" - " node %s or %s: %s.\n", compat_mph, - compat_dr, fdt_strerror(node_offset)); - return -1; - } else - node_type = compat_dr; - } else - node_type = compat_mph; - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, node_type, fdt_strerror(err)); - } - - if (phy_type) { - err = fdt_setprop(blob, node_offset, prop_type, phy_type, - strlen(phy_type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, node_type, fdt_strerror(err)); - } - - return node_offset; -} - -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - const char *modes[] = { "host", "peripheral", "otg" }; - const char *phys[] = { "ulpi", "utmi" }; - int usb_mode_off = -1; - int usb_phy_off = -1; - char str[5]; - int i, j; - - for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { - const char *dr_mode_type = NULL; - const char *dr_phy_type = NULL; - int mode_idx = -1, phy_idx = -1; - snprintf(str, 5, "%s%d", "usb", i); - if (hwconfig(str)) { - for (j = 0; j < ARRAY_SIZE(modes); j++) { - if (hwconfig_subarg_cmp(str, "dr_mode", - modes[j])) { - mode_idx = j; - break; - } - } - - for (j = 0; j < ARRAY_SIZE(phys); j++) { - if (hwconfig_subarg_cmp(str, "phy_type", - phys[j])) { - phy_idx = j; - break; - } - } - - if (mode_idx < 0 && phy_idx < 0) { - printf("WARNING: invalid phy or mode\n"); - return; - } - - if (mode_idx > -1) - dr_mode_type = modes[mode_idx]; - - if (phy_idx > -1) - dr_phy_type = phys[phy_idx]; - } - - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - dr_mode_type, NULL, usb_mode_off); - - if (usb_mode_off < 0) - return; - - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, dr_phy_type, usb_phy_off); - - if (usb_phy_off < 0) - return; - } -} -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ - /* * update crypto node properties to a specified revision of the SEC * called with sec_rev == 0 if not on an E processor diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d5361d7..906c67f 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -15,9 +15,14 @@ #include <usb/ehci-fsl.h> #include <hwconfig.h> #include <fsl_usb.h> +#include <fdt_support.h> #include "ehci.h" +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#endif + static void set_txfifothresh(struct usb_ehci *, u32); /* Check USB PHY clock valid */ @@ -159,3 +164,111 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh) cmd |= TXFIFO_THRESH(txfifo_thresh); ehci_writel(&ehci->txfilltuning, cmd); } + +#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) +static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode, + const char *phy_type, int start_offset) +{ + const char *compat_dr = "fsl-usb2-dr"; + const char *compat_mph = "fsl-usb2-mph"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + const char *node_type = NULL; + int node_offset; + int err; + + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, compat_mph); + if (node_offset < 0) { + node_offset = fdt_node_offset_by_compatible(blob, + start_offset, + compat_dr); + if (node_offset < 0) { + printf("WARNING: could not find compatible node: %s", + fdt_strerror(node_offset)); + return -1; + } + node_type = compat_dr; + } else { + node_type = compat_mph; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, node_type, fdt_strerror(err)); + } + + if (phy_type) { + err = fdt_setprop(blob, node_offset, prop_type, phy_type, + strlen(phy_type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, node_type, fdt_strerror(err)); + } + + return node_offset; +} + +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + static const char * const modes[] = { "host", "peripheral", "otg" }; + static const char * const phys[] = { "ulpi", "utmi" }; + int usb_mode_off = -1; + int usb_phy_off = -1; + char str[5]; + int i, j; + + for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; + int mode_idx = -1, phy_idx = -1; + + snprintf(str, 5, "%s%d", "usb", i); + if (hwconfig(str)) { + for (j = 0; j < ARRAY_SIZE(modes); j++) { + if (hwconfig_subarg_cmp(str, "dr_mode", + modes[j])) { + mode_idx = j; + break; + } + } + + for (j = 0; j < ARRAY_SIZE(phys); j++) { + if (hwconfig_subarg_cmp(str, "phy_type", + phys[j])) { + phy_idx = j; + break; + } + } + + if (mode_idx < 0 && phy_idx < 0) { + printf("WARNING: invalid phy or mode\n"); + return; + } + + if (mode_idx > -1) + dr_mode_type = modes[mode_idx]; + + if (phy_idx > -1) + dr_phy_type = phys[phy_idx]; + } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, + usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, + usb_phy_off); + + if (usb_phy_off < 0) + return; + } +} +#endif -- 1.7.11.7

3 4

[U-Boot] [PATCH v3] ls1021aqds: add hwconfig setting to do pin mux
by Yuan Yao 11 Dec '14

11 Dec '14

The Freescale LS1021AQDS share some pins, so Add the hwconfig option that allows the user to choose which the function he wants. The main pin mux IP is: eSDHC, SAI, IIC2, RGMII, CAN, SAI. Signed-off-by: Yuan Yao <yao.yuan(a)freescale.com> --- Changed in v3: - Add the change log in comment section. - Use #define instead of magic numbers and computation. Changed in v2: - Rebase to latest u-boot. board/freescale/ls1021aqds/ls1021aqds.c | 73 +++++++++++++++++++++++++++++++-- include/configs/ls1021aqds.h | 1 + 2 files changed, 71 insertions(+), 3 deletions(-) diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 5fafc85..fe293b6 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -10,6 +10,7 @@ #include <asm/arch/immap_ls102xa.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> +#include <hwconfig.h> #include <mmc.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> @@ -18,9 +19,22 @@ #include "../common/qixis.h" #include "ls1021aqds_qixis.h" +#define PIN_MUX_SEL_CAN 0x03 +#define PIN_MUX_SEL_IIC2 0xa0 +#define PIN_MUX_SEL_RGMII 0x00 +#define PIN_MUX_SEL_SAI 0x0c +#define PIN_MUX_SEL_SDHC 0x00 + +#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value) +#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value) DECLARE_GLOBAL_DATA_PTR; enum { + MUX_TYPE_CAN, + MUX_TYPE_IIC2, + MUX_TYPE_RGMII, + MUX_TYPE_SAI, + MUX_TYPE_SDHC, MUX_TYPE_SD_PCI4, MUX_TYPE_SD_PC_SA_SG_SG, MUX_TYPE_SD_PC_SA_PC_SG, @@ -158,11 +172,27 @@ int board_early_init_f(void) int config_board_mux(int ctrl_type) { - u8 reg12; + u8 reg12, reg14; reg12 = QIXIS_READ(brdcfg[12]); + reg14 = QIXIS_READ(brdcfg[14]); switch (ctrl_type) { + case MUX_TYPE_CAN: + reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN); + break; + case MUX_TYPE_IIC2: + reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2); + break; + case MUX_TYPE_RGMII: + reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII); + break; + case MUX_TYPE_SAI: + reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI); + break; + case MUX_TYPE_SDHC: + reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC); + break; case MUX_TYPE_SD_PCI4: reg12 = 0x38; break; @@ -181,6 +211,7 @@ int config_board_mux(int ctrl_type) } QIXIS_WRITE(brdcfg[12], reg12); + QIXIS_WRITE(brdcfg[14], reg14); return 0; } @@ -214,14 +245,50 @@ int config_serdes_mux(void) return 0; } -#if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { + int conflict_flag; + + /* some signals can not enable simultaneous*/ + conflict_flag = 0; + if (hwconfig("sdhc")) + conflict_flag++; + if (hwconfig("iic2")) + conflict_flag++; + if (conflict_flag > 1) { + printf("WARNING: pin conflict !\n"); + return 0; + } + + conflict_flag = 0; + if (hwconfig("rgmii")) + conflict_flag++; + if (hwconfig("can")) + conflict_flag++; + if (hwconfig("sai")) + conflict_flag++; + if (conflict_flag > 1) { + printf("WARNING: pin conflict !\n"); + return 0; + } + + if (hwconfig("can")) + config_board_mux(MUX_TYPE_CAN); + else if (hwconfig("rgmii")) + config_board_mux(MUX_TYPE_RGMII); + else if (hwconfig("sai")) + config_board_mux(MUX_TYPE_SAI); + + if (hwconfig("iic2")) + config_board_mux(MUX_TYPE_IIC2); + else if (hwconfig("sdhc")) + config_board_mux(MUX_TYPE_SDHC); + #ifdef CONFIG_FSL_CAAM return sec_init(); #endif + return 0; } -#endif int board_init(void) { diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b19a60f..0f5f988 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -327,6 +327,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING #define CONFIG_CMD_IMLS +#define CONFIG_MISC_INIT_R #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v5] arm: ls102xa: Add NAND boot support for LS1021AQDS board
by Alison Wang 11 Dec '14

11 Dec '14

This patch adds NAND boot support for LS1021AQDS board. SPL framework is used. PBL initialize the internal RAM and copy SPL to it, then SPL initialize DDR using SPD and copy u-boot from NAND flash to DDR, finally SPL transfer control to u-boot. Signed-off-by: Prabhakar Kushwaha <prabhakar(a)freescale.com> Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- Change log: v2: Rebase the patch. Add CONFIG_SYS_DCSR_DCFG_ADDR instead of CONFIG_SYS_DCSRBAR. arch/arm/include/asm/arch-ls102xa/config.h | 3 + arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 ++ board/freescale/ls1021aqds/MAINTAINERS | 1 + board/freescale/ls1021aqds/ls1021aqds.c | 16 +++++ board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +++ configs/ls1021aqds_nand_defconfig | 4 ++ drivers/mtd/nand/fsl_ifc_spl.c | 10 ++++ include/configs/ls1021aqds.h | 72 +++++++++++++++++++++++ 8 files changed, 118 insertions(+) create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg create mode 100644 configs/ls1021aqds_nand_defconfig diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 4d484f5..b79d190 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -17,6 +17,9 @@ #define CONFIG_SYS_IMMR 0x01000000 #define CONFIG_SYS_DCSRBAR 0x20000000 +#define CONFIG_SYS_DCSR_DCFG_ADDR \ + (CONFIG_SYS_DCSRBAR + 0x00220000) + #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) #define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000) #define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index d965426..697d4ca 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -32,6 +32,11 @@ #define ARCH_TIMER_CTRL_ENABLE (1 << 0) #define SYS_COUNTER_CTRL_ENABLE (1 << 24) +#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000 +#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000 + +#define DCFG_DCSR_PORCR1 0 + struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; unsigned long freq_systembus; diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index 7a704cf..638833d 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -8,3 +8,4 @@ F: configs/ls1021aqds_ddr4_nor_defconfig F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig F: configs/ls1021aqds_sdcard_defconfig F: configs/ls1021aqds_qspi_defconfig +F: configs/ls1021aqds_nand_defconfig diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 56635f9..f08e54f 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -203,6 +203,22 @@ void board_init_f(ulong dummy) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; +#ifdef CONFIG_NAND_BOOT + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 porsr1, pinctl; + + /* + * There is LS1 SoC issue where NOR, FPGA are inaccessible during + * NAND boot because IFC signals > IFC_AD7 are not enabled. + * This workaround changes RCW source to make all signals enabled. + */ + porsr1 = in_be32(&gur->porsr1); + pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) | + DCFG_CCSR_PORSR1_RCW_SRC_I2C); + out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), + pinctl); +#endif + /* Set global data pointer */ gd = &gdata; diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg new file mode 100644 index 0000000..222c71d --- /dev/null +++ b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# serdes protocol +0608000a 00000000 00000000 00000000 +60000000 00407900 e0106a00 21046000 +00000000 00000000 00000000 00038000 +00000000 001b7200 00000000 00000000 diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig new file mode 100644 index 0000000..dad5274 --- /dev/null +++ b/configs/ls1021aqds_nand_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_LS1021AQDS=y diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index e336cb1..fb827c5 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -254,3 +254,13 @@ void nand_boot(void) uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); } + +#ifndef CONFIG_SPL_NAND_INIT +void nand_init(void) +{ +} + +void nand_deselect(void) +{ +} +#endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 653dbef..8dc04f2 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -84,6 +84,39 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NO_FLASH #endif +#ifdef CONFIG_NAND_BOOT +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x10000000 +#define CONFIG_SPL_MAX_SIZE 0x1a000 +#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SPL_PAD_TO 0x1c000 +#define CONFIG_SYS_TEXT_BASE 0x82000000 + +#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x67f80000 #endif @@ -261,6 +294,40 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FPGA_FTIM3 0x0 #endif +#if defined(CONFIG_NAND_BOOT) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT +#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR +#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR +#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 +#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 +#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 +#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK @@ -293,6 +360,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#endif /* * Serial Port @@ -502,6 +570,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_NAND_BOOT) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v2] arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
by Alison Wang 11 Dec '14

11 Dec '14

This patch adds QSPI boot support for LS1021AQDS/TWR board. The QSPI boot image need to be programmed into the QSPI flash first. Then the booting will start from QSPI memory space. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- Change log: v2: Rebase the patch. arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 1 + board/freescale/ls1021aqds/MAINTAINERS | 1 + board/freescale/ls1021aqds/ls1021aqds.c | 8 ++++++ board/freescale/ls1021atwr/MAINTAINERS | 1 + board/freescale/ls1021atwr/ls1021atwr.c | 14 ++++++++++ configs/ls1021aqds_qspi_defconfig | 3 ++ configs/ls1021atwr_qspi_defconfig | 3 ++ include/configs/ls1021aqds.h | 34 +++++++++++++++++++++++ include/configs/ls1021atwr.h | 28 +++++++++++++++++++ 9 files changed, 93 insertions(+) create mode 100644 configs/ls1021aqds_qspi_defconfig create mode 100644 configs/ls1021atwr_qspi_defconfig diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 44a2c86..d965426 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -101,6 +101,7 @@ struct ccsr_gur { #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 +#define SCFG_QSPI_CLKSEL 0xc0100000 /* Supplemental Configuration Unit */ struct ccsr_scfg { diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index 962176b..7a704cf 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -7,3 +7,4 @@ F: configs/ls1021aqds_nor_defconfig F: configs/ls1021aqds_ddr4_nor_defconfig F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig F: configs/ls1021aqds_sdcard_defconfig +F: configs/ls1021aqds_qspi_defconfig diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 3d6292e..56635f9 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -50,7 +50,9 @@ enum { int checkboard(void) { +#ifndef CONFIG_QSPI_BOOT char buf[64]; +#endif #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) u8 sw; #endif @@ -77,12 +79,14 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); #endif +#ifndef CONFIG_QSPI_BOOT printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n", QIXIS_READ(id), QIXIS_READ(arch)); printf("FPGA: v%d (%s), build %d\n", (int)QIXIS_READ(scver), qixis_read_tag(buf), (int)qixis_read_minor()); +#endif return 0; } @@ -180,6 +184,10 @@ int board_early_init_f(void) init_early_memctl_regs(); #endif +#ifdef CONFIG_FSL_QSPI + out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); +#endif + /* Workaround for the issue that DDR could not respond to * barrier transaction which is generated by executing DSB/ISB * instruction. Set CCI-400 control override register to diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS index 2312e00..9176706 100644 --- a/board/freescale/ls1021atwr/MAINTAINERS +++ b/board/freescale/ls1021atwr/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/ls1021atwr.h F: configs/ls1021atwr_nor_defconfig F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig F: configs/ls1021atwr_sdcard_defconfig +F: configs/ls1021atwr_qspi_defconfig diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 6f6196b..8ab229d 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -74,6 +74,7 @@ struct cpld_data { u8 rev2; /* Reserved */ }; +#ifndef CONFIG_QSPI_BOOT static void convert_serdes_mux(int type, int need_reset); void cpld_show(void) @@ -109,11 +110,14 @@ void cpld_show(void) in_8(&cpld_data->serdes_mux)); #endif } +#endif int checkboard(void) { puts("Board: LS1021ATWR\n"); +#ifndef CONFIG_QSPI_BOOT cpld_show(); +#endif return 0; } @@ -222,6 +226,7 @@ int board_eth_init(bd_t *bis) } #endif +#ifndef CONFIG_QSPI_BOOT int config_serdes_mux(void) { struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); @@ -253,6 +258,7 @@ int config_serdes_mux(void) return 0; } +#endif int board_early_init_f(void) { @@ -271,6 +277,10 @@ int board_early_init_f(void) out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); #endif +#ifdef CONFIG_FSL_QSPI + out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); +#endif + return 0; } @@ -410,8 +420,10 @@ int board_init(void) #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); +#ifndef CONFIG_QSPI_BOOT config_serdes_mux(); #endif +#endif ls102xa_config_smmu_stream_id(dev_stream_id, ARRAY_SIZE(dev_stream_id)); @@ -466,6 +478,7 @@ u16 flash_read16(void *addr) return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); } +#ifndef CONFIG_QSPI_BOOT static void convert_flash_bank(char bank) { struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); @@ -648,3 +661,4 @@ U_BOOT_CMD( " -change lane C & lane D to PCIeX2\n" "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n" ); +#endif diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig new file mode 100644 index 0000000..05ec8e6 --- /dev/null +++ b/configs/ls1021aqds_qspi_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_LS1021AQDS=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig new file mode 100644 index 0000000..611f6e8 --- /dev/null +++ b/configs/ls1021atwr_qspi_defconfig @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_LS1021ATWR=y diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 6a6f620..653dbef 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -37,8 +37,14 @@ unsigned long get_board_sys_clk(void); unsigned long get_board_ddr_clk(void); #endif +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define CONFIG_QIXIS_I2C_ACCESS +#else #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() +#endif #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg @@ -73,6 +79,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_NO_FLASH +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x67f80000 #endif @@ -112,6 +123,7 @@ unsigned long get_board_ddr_clk(void); /* * IFC Definitions */ +#ifndef CONFIG_QSPI_BOOT #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -204,6 +216,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#endif /* * QIXIS Definitions @@ -316,6 +329,18 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* QSPI */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_FSL_QSPI +#define QSPI0_AMBA_BASE 0x40000000 +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#endif + /* * USB */ @@ -394,7 +419,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#ifdef CONFIG_QSPI_BOOT +#undef CONFIG_CMD_IMLS +#else #define CONFIG_CMD_IMLS +#endif #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT @@ -468,6 +497,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 9a497a6..2713ae4 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -95,6 +95,11 @@ #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_NO_FLASH +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x67f80000 #endif @@ -118,6 +123,7 @@ /* * IFC Definitions */ +#ifndef CONFIG_QSPI_BOOT #define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -161,6 +167,7 @@ #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_WRITE_SWAPPED_DATA +#endif /* CPLD */ @@ -244,6 +251,18 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* QSPI */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_FSL_QSPI +#define QSPI0_AMBA_BASE 0x40000000 +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#endif + /* * Video */ @@ -315,7 +334,11 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING +#ifdef CONFIG_QSPI_BOOT +#undef CONFIG_CMD_IMLS +#else #define CONFIG_CMD_IMLS +#endif #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT @@ -388,6 +411,11 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x20000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -- 2.1.0.27.g96db324

3 4

[U-Boot] [PATCH v1] arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
by Alison Wang 11 Dec '14

11 Dec '14

The SD/NAND/QSPI boot definations are wrong for QE support, this patch is to fix this error. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- include/configs/ls1021aqds.h | 3 ++- include/configs/ls1021atwr.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index f906215..6a6f620 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -104,7 +104,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_CAAM /* Enable CAAM */ -#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index db93201..9a497a6 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -110,7 +110,8 @@ #define CONFIG_FSL_CAAM /* Enable CAAM */ -#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v2] arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
by Alison Wang 11 Dec '14

11 Dec '14

This patch will fix the bug that the partitions on the SD card could not be accessed and add the support for the FAT fs. Signed-off-by: Alison Wang <alison.wang(a)freescale.com> --- Change log: v2: Rebase the patch. include/configs/ls1021aqds.h | 3 +++ include/configs/ls1021atwr.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index e49abe5..f906215 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -312,6 +312,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + /* * USB */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index e84a1b5..db93201 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -240,6 +240,9 @@ #define CONFIG_FSL_ESDHC #define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + /* * Video */ -- 2.1.0.27.g96db324

2 1

[U-Boot] [PATCH v4 0/9] Add SD/NAND boot support for LS1021AQDS/TWR board
by Alison Wang 11 Dec '14

11 Dec '14

This series contain SD boot support for LS1021AQDS/TWR board and NAND boot support for LS1021AQDS board.SPL framework is used. PBL initialize the internal RAM and copy SPL to it, then SPL initialize DDR using SPD and copy u-boot from SD card or NAND flash to DDR, finally SPL transfer control to u-boot. Change log: v4: Add SUPPORT_SPL support for LS1021A. Enable IFC in SD boot. Use some defines instead of the magic numbers. v3: Change the Copyright year. Gave more explaination in the commit. Update MAINTAINERS files. Update PBI and RCW for SD boot. v2: Remove the definition of CONFIG_SPL_MAX_SIZE. Pad the variable u-boot size to 64 byte boundary in pblimage tool. Use pblimage_check_params() insteady of basing on the file name. Use generic u-boot-spl.lds. ---------------------------------------------------------------- Alison Wang (9): ls102xa: pblimage: Add pblimage tool support for LS102xA spl: Use u-boot.img instead of u-boot.bin arm: spl: Add I2C linker list in generic .lds common: spl: Add interactive DDR debugger support for SPL image kconfig: ls1021a: add SUPPORT_SPL ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro arm: ls102xa: Add SD boot support for LS1021AQDS board arm: ls102xa: Add SD boot support for LS1021ATWR board arm: ls102xa: Add NAND boot support for LS1021AQDS board Makefile | 11 ++++++-- arch/arm/Kconfig | 2 ++ arch/arm/cpu/armv7/ls102xa/Makefile | 1 + arch/arm/cpu/armv7/ls102xa/spl.c | 33 ++++++++++++++++++++++++ arch/arm/cpu/u-boot-spl.lds | 3 +++ arch/arm/include/asm/arch-ls102xa/config.h | 1 + arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 ++++ arch/arm/include/asm/arch-ls102xa/spl.h | 20 +++++++++++++++ board/freescale/common/qixis.h | 7 ++++++ board/freescale/ls1021aqds/MAINTAINERS | 2 ++ board/freescale/ls1021aqds/ddr.c | 5 +++- board/freescale/ls1021aqds/ls1021aqds.c | 55 ++++++++++++++++++++++++++++++++++++++++ board/freescale/ls1021aqds/ls102xa_pbi.cfg | 12 +++++++++ board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 ++++++ board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg | 14 +++++++++++ board/freescale/ls1021atwr/MAINTAINERS | 1 + board/freescale/ls1021atwr/ls1021atwr.c | 20 +++++++++++++++ board/freescale/ls1021atwr/ls102xa_pbi.cfg | 12 +++++++++ board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 +++++++++++ common/Makefile | 20 +++++++-------- configs/ls1021aqds_nand_defconfig | 4 +++ configs/ls1021aqds_sdcard_defconfig | 4 +++ configs/ls1021atwr_sdcard_defconfig | 4 +++ drivers/mtd/nand/fsl_ifc_spl.c | 10 ++++++++ include/configs/ls1021aqds.h | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/configs/ls1021atwr.h | 44 ++++++++++++++++++++++++++++++++ tools/pblimage.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------- 27 files changed, 490 insertions(+), 48 deletions(-) create mode 100644 arch/arm/cpu/armv7/ls102xa/spl.c create mode 100644 arch/arm/include/asm/arch-ls102xa/spl.h create mode 100644 board/freescale/ls1021aqds/ls102xa_pbi.cfg create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg create mode 100644 board/freescale/ls1021atwr/ls102xa_pbi.cfg create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg create mode 100644 configs/ls1021aqds_nand_defconfig create mode 100644 configs/ls1021aqds_sdcard_defconfig create mode 100644 configs/ls1021atwr_sdcard_defconfig

4 20

[U-Boot] [PATCH] ls1021aqds: set the default I2C channel before DDR init
by Alison Wang 11 Dec '14

11 Dec '14

From: Chenhui Zhao <chenhui.zhao(a)freescale.com> When resuming from deep sleep, the I2C channel may not be in the default channel. So, switch to the default channel before accessing DDR SPD. Signed-off-by: Chenhui Zhao <chenhui.zhao(a)freescale.com> --- board/freescale/ls1021aqds/ls1021aqds.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 485f412..7edc828 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -137,8 +137,27 @@ unsigned long get_board_ddr_clk(void) return 66666666; } +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + int dram_init(void) { + /* + * When resuming from deep sleep, the I2C channel may not be + * in the default channel. So, switch to the default channel + * before accessing DDR SPD. + */ + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); gd->ram_size = initdram(0); return 0; @@ -157,19 +176,6 @@ int board_mmc_init(bd_t *bis) } #endif -int select_i2c_ch_pca9547(u8 ch) -{ - int ret; - - ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); - if (ret) { - puts("PCA: failed to select proper channel\n"); - return ret; - } - - return 0; -} - int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; -- 2.1.0.27.g96db324

2 1