December 2014 - U-Boot

[U-Boot] [PATCH 0/10] x86: Add generic VESA video driver
by Simon Glass 01 Aug '19

01 Aug '19

This series introduces a generic VESA video driver and adjusts the generic PCI ROM support to support it. It also fixes up some problems which prevent this from working on PowerPC at present. It is now possible to use VESA graphics: - On PowerPC, using the x86 emulator - On x86, using either the x86 emulator or native code execution As it turns out, on the only platform I have tested (link), the x86 emulator is only slightly slower that native code execution (200ms difference). Still, we may as well leave this feature in there. VGA ROMs are a very old technology but they are still used by modern platforms, including at least link and some Atom designs. Simon Glass (10): bios_emulator: Fix an #ifdef typo in the header file x86: Correct endianness isues in pci_rom x86: Support ROMs on other archs bios_emulator: Don't display error when emulator terminates bios_emulator: Add some VESA interface debugging x86: pci: Don't stop when we get a vendor/device mismatch x86: Add a VESA video driver x86: Drop the x86_fb driver x86: Access the VGA ROM when needed RFC: Test code for glacier PCI video support arch/x86/include/asm/u-boot-x86.h | 2 + drivers/bios_emulator/atibios.c | 161 +++++++++++++++++++++++---- drivers/bios_emulator/include/x86emu/debug.h | 2 +- drivers/bios_emulator/x86emu/ops.c | 2 +- drivers/pci/pci_auto.c | 28 ++++- drivers/pci/pci_rom.c | 40 ++++--- drivers/video/Makefile | 2 +- drivers/video/vesa_fb.c | 64 +++++++++++ drivers/video/x86_fb.c | 38 ------- include/configs/canyonlands.h | 31 ++++++ include/configs/chromebook_link.h | 2 +- include/pci.h | 9 ++ include/pci_rom.h | 1 - include/vbe.h | 9 +- 14 files changed, 312 insertions(+), 79 deletions(-) create mode 100644 drivers/video/vesa_fb.c delete mode 100644 drivers/video/x86_fb.c -- 2.2.0.rc0.207.ga3a616c

3 42

[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
by Michael Heimpold 25 Jul '17

25 Jul '17

Closing a file descriptor does not guarantee that the data has been successfully saved to disk, as the kernel might defer the write. Signed-off-by: Michael Heimpold <mhei(a)heimpold.de> --- tools/env/fw_env.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 428e374..0420495 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -1033,7 +1033,19 @@ static int flash_io (int mode) rc = flash_write (fd_current, fd_target, dev_target); + if (fsync (fd_current)) { + fprintf (stderr, + "fsync failed on %s: %s\n", + DEVNAME (dev_current), strerror (errno)); + } + if (HaveRedundEnv) { + if (fsync (fd_target)) { + fprintf (stderr, + "fsync failed on %s: %s\n", + DEVNAME (dev_current), strerror (errno)); + } + if (close (fd_target)) { fprintf (stderr, "I/O error on %s: %s\n", -- 1.7.10.4

5 6

[U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support
by Marek Vasut 22 Feb '16

22 Feb '16

Add basic framebuffer driver for the S3C24xx family of CPUs. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Anatolij Gustschin <agust(a)denx.de> Cc: Kyungmin Park <kyungmin.park(a)samsung.com> Cc: Lukasz Majewski <l.majewski(a)samsung.com> Cc: Minkyu Kang <mk7.kang(a)samsung.com> Cc: Vladimir Zapolskiy <vz(a)mleia.com> V2: Keep the Makefile sorted. --- drivers/video/Makefile | 1 + drivers/video/cfb_console.c | 2 +- drivers/video/s3c-fb.c | 172 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+), 1 deletion(-) create mode 100644 drivers/video/s3c-fb.c diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 14a6781..0e407d0 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o +obj-$(CONFIG_VIDEO_S3C) += s3c-fb.o videomodes.o obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o obj-$(CONFIG_VIDEO_SED13806) += sed13806.o obj-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9231927..98d10e3 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -135,7 +135,7 @@ #endif #endif -#ifdef CONFIG_VIDEO_MXS +#if defined(CONFIG_VIDEO_MXS) || defined(CONFIG_VIDEO_S3C) #define VIDEO_FB_16BPP_WORD_SWAP #endif diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c new file mode 100644 index 0000000..521eb75 --- /dev/null +++ b/drivers/video/s3c-fb.c @@ -0,0 +1,172 @@ +/* + * S3C24x0 LCD driver + * + * NOTE: Only 16/24 bpp operation with TFT LCD is supported. + * + * Copyright (C) 2014 Marek Vasut <marex(a)denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <malloc.h> +#include <video_fb.h> + +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/s3c24x0_cpu.h> + +#include "videomodes.h" + +static GraphicDevice panel; + +/* S3C requires the FB to be 4MiB aligned. */ +#define S3CFB_ALIGN (4 << 20) + +#define S3CFB_LCDCON1_CLKVAL(x) ((x) << 8) +#define S3CFB_LCDCON1_PNRMODE_TFT (0x3 << 5) +#define S3CFB_LCDCON1_BPPMODE_TFT_16BPP (0xc << 1) +#define S3CFB_LCDCON1_BPPMODE_TFT_24BPP (0xd << 1) + +#define S3CFB_LCDCON2_VBPD(x) ((x) << 24) +#define S3CFB_LCDCON2_LINEVAL(x) ((x) << 14) +#define S3CFB_LCDCON2_VFPD(x) ((x) << 6) +#define S3CFB_LCDCON2_VSPW(x) ((x) << 0) + +#define S3CFB_LCDCON3_HBPD(x) ((x) << 19) +#define S3CFB_LCDCON3_HOZVAL(x) ((x) << 8) +#define S3CFB_LCDCON3_HFPD(x) ((x) << 0) + +#define S3CFB_LCDCON4_HSPW(x) ((x) << 0) + +#define S3CFB_LCDCON5_BPP24BL (1 << 12) +#define S3CFB_LCDCON5_FRM565 (1 << 11) +#define S3CFB_LCDCON5_HWSWP (1 << 0) + +#define PS2KHZ(ps) (1000000000UL / (ps)) + +/* + * Example: + * setenv videomode video=ctfb:x:800,y:480,depth:16,mode:0,\ + * pclk:30066,le:41,ri:89,up:45,lo:12, + * hs:1,vs:1,sync:100663296,vmode:0 + */ +static void s3c_lcd_init(GraphicDevice *panel, + struct ctfb_res_modes *mode, int bpp) +{ + uint32_t clk_divider; + struct s3c24x0_lcd *regs = s3c24x0_get_base_lcd(); + + /* Stop the controller. */ + clrbits_le32(&regs->lcdcon1, 1); + + /* Calculate clock divider. */ + clk_divider = (get_HCLK() / PS2KHZ(mode->pixclock)) / 1000; + clk_divider = DIV_ROUND_UP(clk_divider, 2); + if (clk_divider) + clk_divider -= 1; + + /* Program LCD configuration. */ + switch (bpp) { + case 16: + writel(S3CFB_LCDCON1_BPPMODE_TFT_16BPP | + S3CFB_LCDCON1_PNRMODE_TFT | + S3CFB_LCDCON1_CLKVAL(clk_divider), + &regs->lcdcon1); + writel(S3CFB_LCDCON5_HWSWP | S3CFB_LCDCON5_FRM565, + &regs->lcdcon5); + break; + case 24: + writel(S3CFB_LCDCON1_BPPMODE_TFT_24BPP | + S3CFB_LCDCON1_PNRMODE_TFT | + S3CFB_LCDCON1_CLKVAL(clk_divider), + &regs->lcdcon1); + writel(S3CFB_LCDCON5_BPP24BL, &regs->lcdcon5); + break; + } + + writel(S3CFB_LCDCON2_LINEVAL(mode->yres - 1) | + S3CFB_LCDCON2_VBPD(mode->upper_margin - 1) | + S3CFB_LCDCON2_VFPD(mode->lower_margin - 1) | + S3CFB_LCDCON2_VSPW(mode->vsync_len - 1), + &regs->lcdcon2); + + writel(S3CFB_LCDCON3_HBPD(mode->right_margin - 1) | + S3CFB_LCDCON3_HFPD(mode->left_margin - 1) | + S3CFB_LCDCON3_HOZVAL(mode->xres - 1), + &regs->lcdcon3); + + writel(S3CFB_LCDCON4_HSPW(mode->hsync_len - 1), + &regs->lcdcon4); + + /* Write FB address. */ + writel(panel->frameAdrs >> 1, &regs->lcdsaddr1); + writel((panel->frameAdrs + + (mode->xres * mode->yres * panel->gdfBytesPP)) >> 1, + &regs->lcdsaddr2); + writel(mode->xres * bpp / 16, &regs->lcdsaddr3); + + /* Start the controller. */ + setbits_le32(&regs->lcdcon1, 1); +} + +void *video_hw_init(void) +{ + int bpp = -1; + char *penv; + void *fb; + struct ctfb_res_modes mode; + + puts("Video: "); + + /* Suck display configuration from "videomode" variable */ + penv = getenv("videomode"); + if (!penv) { + puts("S3CFB: 'videomode' variable not set!\n"); + return NULL; + } + + bpp = video_get_params(&mode, penv); + + /* fill in Graphic device struct */ + sprintf(panel.modeIdent, "%dx%dx%d", mode.xres, mode.yres, bpp); + + panel.winSizeX = mode.xres; + panel.winSizeY = mode.yres; + panel.plnSizeX = mode.xres; + panel.plnSizeY = mode.yres; + + switch (bpp) { + case 24: + panel.gdfBytesPP = 4; + panel.gdfIndex = GDF_32BIT_X888RGB; + break; + case 16: + panel.gdfBytesPP = 2; + panel.gdfIndex = GDF_16BIT_565RGB; + break; + default: + printf("S3CFB: Invalid BPP specified! (bpp = %i)\n", bpp); + return NULL; + } + + panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; + + /* Allocate framebuffer */ + fb = memalign(S3CFB_ALIGN, roundup(panel.memSize, S3CFB_ALIGN)); + if (!fb) { + printf("S3CFB: Error allocating framebuffer!\n"); + return NULL; + } + + /* Wipe framebuffer */ + memset(fb, 0, panel.memSize); + + panel.frameAdrs = (u32)fb; + + printf("%s\n", panel.modeIdent); + + /* Start framebuffer */ + s3c_lcd_init(&panel, &mode, bpp); + + return (void *)&panel; +} -- 2.1.1

6 33

[U-Boot] [PATCH 0/4 v4] arm: socfpga: Add Cadence QSPI support
by Stefan Roese 14 Jan '16

14 Jan '16

Hi! So this is my 4th posting regarding the Candence SPI driver on SoCFPGA. Again, SPI NOR flash is working. At least on SoCrates and on another custom SoCFPGA based board. The main change in this version is, that the Cadence driver now is a driver model (DM) based driver. And this needs the DT support which I posted just before. One of the reasons to enable DT support in SoCFPGA is, that I need to support multiple different SPI controllers for this platform. This is the QSPI Cadence controller and the Designware SPI master controller. Both are implemented in the SoCFPGA. And enabling both controllers is only possible by using the new driver model (DM). The DM SPI code only supports DT based probing. So it was easier to move SoCFPGA to DT than to add the (deprecated) platform-data based probing to the DM SPI suport. Note that I have patches to support the Designware SPI master controller also via DM in the queue. I'll post them shortly. Thanks, Stefan Cc: Chin Liang See <clsee(a)altera.com> Cc: Dinh Nguyen <dinguyen(a)altera.com> Cc: Vince Bridgers <vbridger(a)altera.com> Cc: Marek Vasut <marex(a)denx.de> Cc: Pavel Machek <pavel(a)denx.de> Cc: Simon Glass <sjg(a)chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki(a)gmail.com>

5 18

[U-Boot] [RFC PATCH 1/2] common: Add new clk command
by Michal Simek 05 Jan '16

05 Jan '16

Command provides just dump subcommand for showing clock frequencies in a soc. Signed-off-by: Michal Simek <michal.simek(a)xilinx.com> --- README | 1 + common/Makefile | 1 + common/cmd_clk.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++ include/clk.h | 6 ++++++ include/config_cmd_all.h | 1 + 5 files changed, 60 insertions(+) create mode 100644 common/cmd_clk.c create mode 100644 include/clk.h diff --git a/README b/README index aea82be..0087649 100644 --- a/README +++ b/README @@ -887,6 +887,7 @@ The following options need to be configured: CONFIG_CMD_BSP * Board specific commands CONFIG_CMD_BOOTD bootd CONFIG_CMD_CACHE * icache, dcache + CONFIG_CMD_CLK * clock command support CONFIG_CMD_CONSOLE coninfo CONFIG_CMD_CRC32 * crc32 CONFIG_CMD_DATE * support for RTC, date/time... diff --git a/common/Makefile b/common/Makefile index d12cba5..a000e7d 100644 --- a/common/Makefile +++ b/common/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o obj-$(CONFIG_CMD_CACHE) += cmd_cache.o obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o +obj-$(CONFIG_CMD_CLK) += cmd_clk.o obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o diff --git a/common/cmd_clk.c b/common/cmd_clk.c new file mode 100644 index 0000000..6d3d46a --- /dev/null +++ b/common/cmd_clk.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2013 Xilinx, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <command.h> +#include <clk.h> + +int __weak soc_clk_dump(void) +{ + puts("Not implemented\n"); + return 1; +} + +static int do_clk_dump(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + return soc_clk_dump(); +} + +static cmd_tbl_t cmd_clk_sub[] = { + U_BOOT_CMD_MKENT(dump, 1, 1, do_clk_dump, "", ""), +}; + +static int do_clk(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + cmd_tbl_t *c; + + if (argc < 2) + return CMD_RET_USAGE; + + /* Strip off leading 'clk' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_clk_sub[0], ARRAY_SIZE(cmd_clk_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +#ifdef CONFIG_SYS_LONGHELP +static char clk_help_text[] = + "dump - Print clock frequencies"; +#endif + +U_BOOT_CMD(clk, 2, 1, do_clk, "CLK sub-system", clk_help_text); diff --git a/include/clk.h b/include/clk.h new file mode 100644 index 0000000..df4570c --- /dev/null +++ b/include/clk.h @@ -0,0 +1,6 @@ +#ifndef _CLK_H_ +#define _CLK_H_ + +int soc_clk_dump(void); + +#endif /* _CLK_H_ */ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index d847069..3e8983f 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -23,6 +23,7 @@ #define CONFIG_CMD_BSP /* Board Specific functions */ #define CONFIG_CMD_CACHE /* icache, dcache */ #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ +#define CONFIG_CMD_CLK /* Clock support */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ #define CONFIG_CMD_DHCP /* DHCP Support */ -- 1.8.2.3

6 12

[U-Boot] [PATCH v2 0/7] mtd/st_smi: Add fixes for smi driver
by Vipin Kumar 14 Dec '15

14 Dec '15

Modifications in v2 (Review comments incorporation) - Use setbits_le32 and clrbits_le32 whereever applicable in patch-set - Define smi_mtd_init() routine irrespective of CONFIG_MTD_DEVICE Modifications in v1 - Add MTD support for smi driver - Write to flash in a tight loop - Alphabetically sort the list of devices - Avoid issuing multiple write enable commands Armando Visconti (1): mtd/st_smi: Add support for Micron N25Q128 Flash Vipin Kumar (6): mtd/st_smi: Clear error flags while initiating a fresh write mtd/st_smi: Rearrange the supported devices in alphabetical order mtd/st_smi: Avoid issuing multiple WE commands mtd/st_smi: Write to flash in a tight loop mtd/st_smi: Use page sizes respective to flash mtd/st_smi: Add mtd support for smi drivers/mtd/st_smi.c | 260 ++++++++++++++++++++++++++++++++++++++------- include/linux/mtd/st_smi.h | 1 - 2 files changed, 223 insertions(+), 38 deletions(-) -- 1.8.0

3 14

[U-Boot] [PATCH] FSL SPI read fix.
by Dale Smith 14 Dec '15

14 Dec '15

The fsl spi engine is non functional when reading from a device. This patch fixes it. Note that none of the other spi interfaces parse through the datastream looking for 0x0b bytes. -Dale diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index a1ebd33..737719b 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -291,17 +291,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, debug("***spi_xfer:...%08x readed\n", tmpdin); } } - if (data_in) { - memcpy(data_in, buffer + 2 * cmd_len, tran_len); - if (*buffer == 0x0b) { - data_in += tran_len; - data_len -= tran_len; - *(int *)buffer += tran_len; - } - } spi_cs_deactivate(slave); } - + if (data_in) + memcpy(data_in, buffer + rx_offset, len); free(buffer); return 0; }

6 8

[U-Boot] [RFC][PATCH 00/25] eeprom: Cleanup and support for multiple i2c busses
by Marek Vasut 10 Nov '15

10 Nov '15

This patch series first zaps a couple of ancient boards and ugly code which was in the way of proper cleanup for the eeprom command. Once that is done, the eeprom command undergoes proper cleaning. Finally, there is one patch which adds support for selecting on which bus the I2C EEPROM is. This functionality seems to be in high demand, which is exactly the reason why some boards decided to implement this themselves :-( This series makes U-Boot also less IoT, since it removes all the nice PHP, CSS and SQL stuff from it ;-) Marek Vasut (25): ppc: Zap ICU862 board ppc: Zap MHPC board ppc: Zap Hymod board ppc: Zap HWW1U1A board ppc: Zap IDS8247 board ppc: Zap TQM8260 board ppc: Zap TQM8272 board arm: Zap tricorder-eeprom eeprom: Shuffle code around eeprom: Zap CONFIG_SYS_I2C_MULTI_EEPROMS eeprom: Zap CONFIG_SYS_EEPROM_X40430 eeprom: Zap eeprom_probe() eeprom: Zap CONFIG_SPI_X eeprom: Pull out the I/O code eeprom: Pull out address computation eeprom: Make eeprom_write_enable() weak eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS eeprom: Suck the ifdef into eeprom_init() eeprom: Pull out CONFIG_SYS_EEPROM_PAGE_WRITE_BITS eeprom: Pull out transfer length computation eeprom: Pull out the RW loop eeprom: Cultivate the ifdef mess eeprom: Add bus argument to eeprom_init() eeprom: Add support for selecting i2c bus eeprom: Clean up checkpatch issues README | 5 - arch/powerpc/cpu/mpc8260/Kconfig | 16 - arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +- arch/powerpc/cpu/mpc8260/interrupts.c | 10 +- arch/powerpc/cpu/mpc8260/pci.c | 2 - arch/powerpc/cpu/mpc8260/start.S | 14 - arch/powerpc/cpu/mpc83xx/start.S | 11 - arch/powerpc/cpu/mpc85xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/Kconfig | 8 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 2 - arch/powerpc/cpu/mpc8xx/fec.c | 40 +- arch/powerpc/include/asm/u-boot.h | 3 - board/corscience/tricorder/Makefile | 2 +- board/corscience/tricorder/tricorder-eeprom.c | 251 ------- board/corscience/tricorder/tricorder-eeprom.h | 41 -- board/eltec/mhpc/Kconfig | 12 - board/eltec/mhpc/MAINTAINERS | 6 - board/eltec/mhpc/Makefile | 8 - board/eltec/mhpc/flash.c | 414 ----------- board/eltec/mhpc/mhpc.c | 465 ------------- board/eltec/mhpc/u-boot.lds.debug | 121 ---- board/exmeritus/hww1u1a/Kconfig | 12 - board/exmeritus/hww1u1a/MAINTAINERS | 6 - board/exmeritus/hww1u1a/Makefile | 12 - board/exmeritus/hww1u1a/ddr.c | 34 - board/exmeritus/hww1u1a/gpios.h | 56 -- board/exmeritus/hww1u1a/hww1u1a.c | 268 -------- board/exmeritus/hww1u1a/law.c | 18 - board/exmeritus/hww1u1a/tlb.c | 90 --- board/hymod/Kconfig | 9 - board/hymod/MAINTAINERS | 6 - board/hymod/Makefile | 8 - board/hymod/bsp.c | 387 ----------- board/hymod/config.mk | 14 - board/hymod/eeprom.c | 678 ------------------ board/hymod/env.c | 221 ------ board/hymod/fetch.c | 91 --- board/hymod/flash.c | 490 ------------- board/hymod/flash.h | 140 ---- board/hymod/global_env | 145 ---- board/hymod/hymod.c | 521 -------------- board/hymod/hymod.h | 305 --------- board/hymod/input.c | 91 --- board/hymod/u-boot.lds | 132 ---- board/hymod/u-boot.lds.debug | 121 ---- board/icu862/Kconfig | 9 - board/icu862/MAINTAINERS | 7 - board/icu862/Makefile | 8 - board/icu862/flash.c | 575 ---------------- board/icu862/icu862.c | 199 ------ board/icu862/pcmcia.c | 262 ------- board/icu862/u-boot.lds | 82 --- board/icu862/u-boot.lds.debug | 122 ---- board/ids/ids8247/Kconfig | 12 - board/ids/ids8247/MAINTAINERS | 6 - board/ids/ids8247/Makefile | 11 - board/ids/ids8247/ids8247.c | 390 ----------- board/tqc/tqm8260/Kconfig | 12 - board/tqc/tqm8260/MAINTAINERS | 16 - board/tqc/tqm8260/Makefile | 8 - board/tqc/tqm8260/README | 415 ----------- board/tqc/tqm8260/tqm8260.c | 352 ---------- board/tqc/tqm8272/Kconfig | 12 - board/tqc/tqm8272/MAINTAINERS | 6 - board/tqc/tqm8272/Makefile | 8 - board/tqc/tqm8272/nand.c | 264 ------- board/tqc/tqm8272/tqm8272.c | 944 -------------------------- board/tqc/tqm8272/tqm8272.h | 37 - common/cmd_eeprom.c | 501 +++++--------- common/env_eeprom.c | 4 +- configs/HWW1U1A_defconfig | 3 - configs/ICU862_100MHz_defconfig | 4 - configs/ICU862_defconfig | 3 - configs/IDS8247_defconfig | 3 - configs/MHPC_defconfig | 3 - configs/TQM8255_AA_defconfig | 4 - configs/TQM8260_AA_defconfig | 4 - configs/TQM8260_AB_defconfig | 4 - configs/TQM8260_AC_defconfig | 4 - configs/TQM8260_AD_defconfig | 4 - configs/TQM8260_AE_defconfig | 4 - configs/TQM8260_AF_defconfig | 4 - configs/TQM8260_AG_defconfig | 4 - configs/TQM8260_AH_defconfig | 4 - configs/TQM8260_AI_defconfig | 4 - configs/TQM8265_AA_defconfig | 4 - configs/TQM8272_defconfig | 3 - configs/hymod_defconfig | 3 - include/asm-generic/u-boot.h | 3 - include/common.h | 8 +- include/commproc.h | 32 - include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 1 - include/configs/CPCI405AB.h | 1 - include/configs/CPCI750.h | 1 - include/configs/DB64360.h | 1 - include/configs/DB64460.h | 1 - include/configs/DU440.h | 1 - include/configs/HWW1U1A.h | 460 ------------- include/configs/ICU862.h | 443 ------------ include/configs/IDS8247.h | 462 ------------- include/configs/MHPC.h | 369 ---------- include/configs/P1010RDB.h | 1 - include/configs/PMC440.h | 1 - include/configs/TQM8260.h | 620 ----------------- include/configs/TQM8272.h | 735 -------------------- include/configs/TQM834x.h | 1 - include/configs/W7OLMC.h | 1 - include/configs/W7OLMG.h | 1 - include/configs/acadia.h | 1 - include/configs/am335x_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/axs101.h | 1 - include/configs/bamboo.h | 1 - include/configs/canyonlands.h | 1 - include/configs/cpci5200.h | 1 - include/configs/ebony.h | 1 - include/configs/hymod.h | 728 -------------------- include/configs/icon.h | 1 - include/configs/intip.h | 1 - include/configs/katmai.h | 1 - include/configs/km/km-powerpc.h | 1 - include/configs/km/km_arm.h | 1 - include/configs/korat.h | 1 - include/configs/ks2_evm.h | 1 - include/configs/luan.h | 1 - include/configs/m28evk.h | 1 - include/configs/mecp5200.h | 1 - include/configs/motionpro.h | 1 - include/configs/ocotea.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/p1_twr.h | 1 - include/configs/pcm051.h | 1 - include/configs/pengwyn.h | 1 - include/configs/pf5200.h | 1 - include/configs/sequoia.h | 1 - include/configs/t3corp.h | 1 - include/configs/taishan.h | 1 - include/configs/tricorder.h | 1 - include/configs/walnut.h | 1 - include/configs/yosemite.h | 1 - include/pcmcia.h | 2 - include/status_led.h | 19 - tools/bddb/README | 116 ---- tools/bddb/badsubmit.php | 23 - tools/bddb/bddb.css | 207 ------ tools/bddb/brlog.php | 109 --- tools/bddb/browse.php | 147 ---- tools/bddb/config.php | 16 - tools/bddb/create_tables.sql | 90 --- tools/bddb/defs.php | 710 ------------------- tools/bddb/dodelete.php | 65 -- tools/bddb/dodellog.php | 57 -- tools/bddb/doedit.php | 186 ----- tools/bddb/doedlog.php | 76 --- tools/bddb/donew.php | 230 ------- tools/bddb/donewlog.php | 86 --- tools/bddb/edit.php | 131 ---- tools/bddb/edlog.php | 86 --- tools/bddb/execute.php | 33 - tools/bddb/index.php | 38 -- tools/bddb/new.php | 120 ---- tools/bddb/newlog.php | 54 -- 164 files changed, 174 insertions(+), 15976 deletions(-) delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h delete mode 100644 board/eltec/mhpc/Kconfig delete mode 100644 board/eltec/mhpc/MAINTAINERS delete mode 100644 board/eltec/mhpc/Makefile delete mode 100644 board/eltec/mhpc/flash.c delete mode 100644 board/eltec/mhpc/mhpc.c delete mode 100644 board/eltec/mhpc/u-boot.lds.debug delete mode 100644 board/exmeritus/hww1u1a/Kconfig delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS delete mode 100644 board/exmeritus/hww1u1a/Makefile delete mode 100644 board/exmeritus/hww1u1a/ddr.c delete mode 100644 board/exmeritus/hww1u1a/gpios.h delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c delete mode 100644 board/exmeritus/hww1u1a/law.c delete mode 100644 board/exmeritus/hww1u1a/tlb.c delete mode 100644 board/hymod/Kconfig delete mode 100644 board/hymod/MAINTAINERS delete mode 100644 board/hymod/Makefile delete mode 100644 board/hymod/bsp.c delete mode 100644 board/hymod/config.mk delete mode 100644 board/hymod/eeprom.c delete mode 100644 board/hymod/env.c delete mode 100644 board/hymod/fetch.c delete mode 100644 board/hymod/flash.c delete mode 100644 board/hymod/flash.h delete mode 100644 board/hymod/global_env delete mode 100644 board/hymod/hymod.c delete mode 100644 board/hymod/hymod.h delete mode 100644 board/hymod/input.c delete mode 100644 board/hymod/u-boot.lds delete mode 100644 board/hymod/u-boot.lds.debug delete mode 100644 board/icu862/Kconfig delete mode 100644 board/icu862/MAINTAINERS delete mode 100644 board/icu862/Makefile delete mode 100644 board/icu862/flash.c delete mode 100644 board/icu862/icu862.c delete mode 100644 board/icu862/pcmcia.c delete mode 100644 board/icu862/u-boot.lds delete mode 100644 board/icu862/u-boot.lds.debug delete mode 100644 board/ids/ids8247/Kconfig delete mode 100644 board/ids/ids8247/MAINTAINERS delete mode 100644 board/ids/ids8247/Makefile delete mode 100644 board/ids/ids8247/ids8247.c delete mode 100644 board/tqc/tqm8260/Kconfig delete mode 100644 board/tqc/tqm8260/MAINTAINERS delete mode 100644 board/tqc/tqm8260/Makefile delete mode 100644 board/tqc/tqm8260/README delete mode 100644 board/tqc/tqm8260/tqm8260.c delete mode 100644 board/tqc/tqm8272/Kconfig delete mode 100644 board/tqc/tqm8272/MAINTAINERS delete mode 100644 board/tqc/tqm8272/Makefile delete mode 100644 board/tqc/tqm8272/nand.c delete mode 100644 board/tqc/tqm8272/tqm8272.c delete mode 100644 board/tqc/tqm8272/tqm8272.h delete mode 100644 configs/HWW1U1A_defconfig delete mode 100644 configs/ICU862_100MHz_defconfig delete mode 100644 configs/ICU862_defconfig delete mode 100644 configs/IDS8247_defconfig delete mode 100644 configs/MHPC_defconfig delete mode 100644 configs/TQM8255_AA_defconfig delete mode 100644 configs/TQM8260_AA_defconfig delete mode 100644 configs/TQM8260_AB_defconfig delete mode 100644 configs/TQM8260_AC_defconfig delete mode 100644 configs/TQM8260_AD_defconfig delete mode 100644 configs/TQM8260_AE_defconfig delete mode 100644 configs/TQM8260_AF_defconfig delete mode 100644 configs/TQM8260_AG_defconfig delete mode 100644 configs/TQM8260_AH_defconfig delete mode 100644 configs/TQM8260_AI_defconfig delete mode 100644 configs/TQM8265_AA_defconfig delete mode 100644 configs/TQM8272_defconfig delete mode 100644 configs/hymod_defconfig delete mode 100644 include/configs/HWW1U1A.h delete mode 100644 include/configs/ICU862.h delete mode 100644 include/configs/IDS8247.h delete mode 100644 include/configs/MHPC.h delete mode 100644 include/configs/TQM8260.h delete mode 100644 include/configs/TQM8272.h delete mode 100644 include/configs/hymod.h delete mode 100644 tools/bddb/README delete mode 100644 tools/bddb/badsubmit.php delete mode 100644 tools/bddb/bddb.css delete mode 100644 tools/bddb/brlog.php delete mode 100644 tools/bddb/browse.php delete mode 100644 tools/bddb/config.php delete mode 100644 tools/bddb/create_tables.sql delete mode 100644 tools/bddb/defs.php delete mode 100644 tools/bddb/dodelete.php delete mode 100644 tools/bddb/dodellog.php delete mode 100644 tools/bddb/doedit.php delete mode 100644 tools/bddb/doedlog.php delete mode 100644 tools/bddb/donew.php delete mode 100644 tools/bddb/donewlog.php delete mode 100644 tools/bddb/edit.php delete mode 100644 tools/bddb/edlog.php delete mode 100644 tools/bddb/execute.php delete mode 100644 tools/bddb/index.php delete mode 100644 tools/bddb/new.php delete mode 100644 tools/bddb/newlog.php Cc: Tom Rini <trini(a)ti.com> -- 2.1.1

4 36

[U-Boot] Relocation issue - need help!
by Wolfgang Denk 21 Oct '15

21 Oct '15

Hi, I'm trying to track down a "syntax error" issue that gets triggered when erasing the U-Boot image in NOR flash. Symptoms look like this: => print update update=protect off 0xfc000000 +${filesize};erase 0xfc000000 +${filesize};cp.b 200000 0xfc000000 ${filesize};protect on 0xfc000000 +${filesize} => run update Un-Protected 2 sectors .. done Erased 2 sectors syntax error Protected 2 sectors => run update syntax error git bisect found commit 199adb6 "common/misc: sparse fixes" as culprit; breaking this down further showed a single line in common/cli_hush.c to trigger the problem. This patch fixes it: --- common/cli_hush.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cli_hush.c b/common/cli_hush.c index 38da5a0..5bbcfe6 100644 --- a/common/cli_hush.c +++ b/common/cli_hush.c @@ -3127,7 +3127,7 @@ static void mapset(const unsigned char *set, int code) for (s=set; *s; s++) map[*s] = code; } -static void update_ifs_map(void) +void update_ifs_map(void) { /* char *ifs and char map[256] are both globals. */ ifs = (uchar *)getenv("IFS"); -- 1.8.3.1 But I still have bad feelings - symptoms indicate that this is actually a relocation issue, as it only gets triggered when erasing the U-Boot image in NOR flash, so probably there are still pointers to data in NOR being used. This patch here is not suited to fix the original cause of this issue. But then, I do not see where there might be a relocation problem. To be sure I even verified that "ifs" and "map[]" are really in RAM all the time. Has anybody an idea how to further track this down? Or is the patch above actually a real fix? If so, why? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Old programmers never die, they just branch to a new address.

10 31

[U-Boot] usb start crashing on arndale
by armdev 19 Oct '15

19 Oct '15

Hi, We have recently started working on arndale and running u-boot head on it. Seems like it is crashing on our setup with a data abort on usb start. Can anyone please confirm and suggest a fix / solution U-Boot 2014.04-rc1-00486-geeb72e6 (Mar 11 2014 - 11:44:32) for ARNDALE CPU: Exynos5250@1000MHz Board: Arndale I2C: i2c_init: failed to init bus 0 for speed = 100000 ready DRAM: 2 GiB trace: copying 00084f98 bytes of early data from 50000000 to beff0000 trace: enabled WARNING: Caches not enabled MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 i2c_init: failed to init bus 0 for speed = 100000 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 ARNDALE # usb start (Re)start USB... USB0: data abort pc : [<bef8524c>] lr : [<bef85298>] sp : beb5f9c0 ip : 00000003 fp : 00000000 r10: 00000000 r9 : beb62ecc r8 : befbcc80 r7 : befbcc84 r6 : 0000ffff r5 : 000000ff r4 : 00000001 r3 : 00000000 r2 : 00000001 r1 : 000000ff r0 : 0000ffff Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... Thanks and Regards Armdev@FTM Team

3 5