January 2014 - U-Boot

[U-Boot] [PATCH v4 08/29] zynq: Add GEM0, GEM1 configs support
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Zynq ethernet controller support two GEM's like CONFIG_ZYNQ_GEM0 and CONFIG_ZYNQ_GEM1 enabled both so-that the respective board will define these macros based on their usage. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index f104558..ea25159 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -57,10 +57,16 @@ #endif /* Ethernet driver */ -#define CONFIG_NET_MULTI -#define CONFIG_ZYNQ_GEM #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 +#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) +# define CONFIG_NET_MULTI +# define CONFIG_ZYNQ_GEM +# define CONFIG_MII +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_PHYLIB +# define CONFIG_PHY_MARVELL +#endif #define CONFIG_ZYNQ_SPI /* SPI */ @@ -103,12 +109,6 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_MAY_FAIL -/* MII and Phylib */ -#define CONFIG_MII -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_PHYLIB -#define CONFIG_PHY_MARVELL - /* Environment */ #define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ #define CONFIG_ENV_IS_NOWHERE -- 1.8.3

1 0

[U-Boot] [PATCH v4 07/29] zynq: Add UART0, UART1 configs support
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Zynq uart controller support two serial ports like CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1 enabled both so-that the respective board will define these macros based on their usage. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 6e545e5..f104558 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -33,10 +33,22 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Zynq Serial driver */ -#define CONFIG_ZYNQ_SERIAL -#define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000 -#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE -#define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 +#define CONFIG_ZYNQ_SERIAL_UART1 +#ifdef CONFIG_ZYNQ_SERIAL_UART0 +# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 +# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE +# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 +#endif + +#ifdef CONFIG_ZYNQ_SERIAL_UART1 +# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000 +# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE +# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000 +#endif + +#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) +# define CONFIG_ZYNQ_SERIAL +#endif /* DCC driver */ #if defined(CONFIG_ZYNQ_DCC) -- 1.8.3

1 0

[U-Boot] [PATCH v4 06/29] zynq: Enable cache options
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

- Enable cache command - Turn-off L2 cache - Turn-on D-cache Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index c8ab06f..6e545e5 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -16,6 +16,16 @@ # define CONFIG_CPU_FREQ_HZ 800000000 #endif +/* Cache options */ +#define CONFIG_CMD_CACHE +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#define CONFIG_SYS_L2CACHE_OFF +#ifndef CONFIG_SYS_L2CACHE_OFF +# define CONFIG_SYS_L2_PL310 +# define CONFIG_SYS_PL310_BASE 0xf8f02000 +#endif + /* Serial drivers */ #define CONFIG_BAUDRATE 115200 /* The following table includes the supported baudrates */ -- 1.8.3

1 0

[U-Boot] [PATCH v4 05/29] zynq: Minor config cleanup
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Cleanups mostly on: - Add comments - Re-order configs - Remove #define CONFIG_ZYNQ_SDHCI Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 76 ++++++++++++++++++++++++++------------------------ 1 file changed, 39 insertions(+), 37 deletions(-) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 8be52df..c8ab06f 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -7,33 +7,51 @@ #ifndef __CONFIG_ZYNQ_H #define __CONFIG_ZYNQ_H -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ +/* High Level configuration Options */ +#define CONFIG_ARMV7 #define CONFIG_ZYNQ /* CPU clock */ -#define CONFIG_CPU_FREQ_HZ 800000000 +#ifndef CONFIG_CPU_FREQ_HZ +# define CONFIG_CPU_FREQ_HZ 800000000 +#endif +/* Serial drivers */ +#define CONFIG_BAUDRATE 115200 /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CONFIG_BAUDRATE 115200 - -/* XPSS Serial driver */ +/* Zynq Serial driver */ #define CONFIG_ZYNQ_SERIAL #define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000 #define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE #define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 +/* DCC driver */ +#if defined(CONFIG_ZYNQ_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#endif + /* Ethernet driver */ #define CONFIG_NET_MULTI #define CONFIG_ZYNQ_GEM #define CONFIG_ZYNQ_GEM0 #define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 -#define CONFIG_ZYNQ_SDHCI -#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_SPI +/* SPI */ +#ifdef CONFIG_ZYNQ_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_SST +# define CONFIG_CMD_SF +#endif + +/* NOR */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ZYNQ_SDHCI0 /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC @@ -48,7 +66,6 @@ #endif #define CONFIG_ZYNQ_I2C0 - /* I2C */ #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) # define CONFIG_CMD_I2C @@ -58,26 +75,6 @@ # define CONFIG_SYS_I2C_ZYNQ_SLAVE 1 #endif -#if defined(CONFIG_ZYNQ_DCC) -# define CONFIG_ARM_DCC -# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ -#endif - -#define CONFIG_ZYNQ_SPI - -/* SPI */ -#ifdef CONFIG_ZYNQ_SPI -# define CONFIG_SPI_FLASH -# define CONFIG_SPI_FLASH_SST -# define CONFIG_CMD_SF -#endif - -/* Enable the PL to be downloaded */ -#define CONFIG_FPGA -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_ZYNQPL -#define CONFIG_CMD_FPGA - #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY @@ -91,12 +88,9 @@ #define CONFIG_PHY_MARVELL /* Environment */ +#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_SYS_MALLOC_LEN 0x400000 +#define CONFIG_SYS_LOAD_ADDR 0 /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "zynq-uboot> " @@ -110,8 +104,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LOAD_ADDR 0 - /* Physical Memory map */ #define CONFIG_SYS_TEXT_BASE 0 @@ -122,15 +114,25 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) +#define CONFIG_SYS_MALLOC_LEN 0x400000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -/* OF */ + +/* Enable the PL to be downloaded */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_ZYNQPL +#define CONFIG_CMD_FPGA + +/* Open Firmware flat tree */ +#define CONFIG_OF_LIBFDT + +/* FIT support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ -#define CONFIG_OF_LIBFDT /* Boot FreeBSD/vxWorks from an ELF image */ #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) -- 1.8.3

1 0

[U-Boot] [PATCH v4 04/29] zynq: Cleanup on memory configs
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Cleanup on memory configuration options: - Add comment - Re-order configs Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index e34024d..8be52df 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -13,14 +13,6 @@ /* CPU clock */ #define CONFIG_CPU_FREQ_HZ 800000000 -/* Ram */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_TEXT_BASE 0 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} @@ -105,11 +97,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_MALLOC_LEN 0x400000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* Miscellaneous configurable options */ #define CONFIG_SYS_PROMPT "zynq-uboot> " @@ -125,7 +112,21 @@ #define CONFIG_SYS_LOAD_ADDR 0 +/* Physical Memory map */ +#define CONFIG_SYS_TEXT_BASE 0 +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) + +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* OF */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ -- 1.8.3

1 0

[U-Boot] [PATCH v4 03/29] zynq: Cleanup on miscellaneous configs
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Cleanup on miscellaneous configurable options: - Rename SYS_PROMPT as "zynq-uboot" - Add comment - Re-order configs Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 0492818..e34024d 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -111,19 +111,20 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "zynq-uboot> " +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LOAD_ADDR 0 -#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* OF */ #define CONFIG_FIT -- 1.8.3

1 0

[U-Boot] [PATCH v4 02/29] zynq: Enable Boot FreeBSD/vxWorks
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

This enabled Boot FreeBSD/vxWorks from an ELF image support Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 6019c4a..0492818 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -130,6 +130,13 @@ #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ #define CONFIG_OF_LIBFDT +/* Boot FreeBSD/vxWorks from an ELF image */ +#if defined(CONFIG_ZYNQ_BOOT_FREEBSD) +# define CONFIG_API +# define CONFIG_CMD_ELF +# define CONFIG_SYS_MMC_MAX_DEVICE 1 +#endif + /* Commands */ #include <config_cmd_default.h> -- 1.8.3

1 0

[U-Boot] [PATCH v4 01/29] zynq: Enable CONFIG_FIT_VERBOSE
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

Enabled fit_format_{error,warning}() Signed-off-by: Jagannadha Sutradharudu Teki <jaganna(a)xilinx.com> --- include/configs/zynq.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 82ec826..6019c4a 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -127,6 +127,7 @@ /* OF */ #define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ #define CONFIG_OF_LIBFDT /* Commands */ -- 1.8.3

1 0

[U-Boot] [PATCH v3 00/29] zynq: More boards support
by Jagannadha Sutradharudu Teki 08 Jan '14

08 Jan '14

These changes are from u-boot-xlnx.git repo from git.xilinx.com This repo is well tested on xilinx zynq platform, hence pushing the same on upstream. Excluded qspi and nand changes from previous series. -- Thanks, Jagan. Jagannadha Sutradharudu Teki (29): zynq: Enable CONFIG_FIT_VERBOSE zynq: Enable Boot FreeBSD/vxWorks zynq: Cleanup on miscellaneous configs zynq: Cleanup on memory configs zynq: Minor config cleanup zynq: Enable cache options zynq: Add UART0, UART1 configs support zynq: Add GEM0, GEM1 configs support zynq-common: Rename zynq with zynq-common doc: zynq: Add information on zynq u-boot zynq: Add zynq zc70x board support zynq: Add zynq zed board support zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs zynq-common: Define exact TEXT_BASE zynq: zc70x: Add Catalyst 24WC08 EEPROM config support zynq: Add zynq microzed board support zynq: Add zynq_zc770 xm010 board support zynq: Add zynq_zc770 xm013 board support zynq: Add zynq_zc770 xm012 board support zynq: Add support to find bootmode zynq-common: Define default environment zynq-common: Change Env. Sector size to 128Kb zynq-common: Define flash env. partition zynq-common: Define CONFIG_ENV_OVERWRITE dts: zynq: Add basic fdt support gpio: zynq: Add dummy gpio routines zynq-common: Enable verified boot(RSA) dts: zynq: Add more zynq dts files doc: Update the zynq u-boot status arch/arm/cpu/armv7/zynq/slcr.c | 6 + arch/arm/dts/zynq-7000.dtsi | 13 ++ arch/arm/include/asm/arch-zynq/gpio.h | 25 +++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/dts/zynq-microzed.dts | 14 ++ board/xilinx/dts/zynq-zc702.dts | 14 ++ board/xilinx/dts/zynq-zc706.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm010.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm012.dts | 14 ++ board/xilinx/dts/zynq-zc770-xm013.dts | 14 ++ board/xilinx/dts/zynq-zed.dts | 14 ++ board/xilinx/zynq/board.c | 25 +++ boards.cfg | 8 +- doc/README.zynq | 91 +++++++++++ include/configs/zynq-common.h | 241 +++++++++++++++++++++++++++++ include/configs/zynq.h | 139 ----------------- include/configs/zynq_microzed.h | 25 +++ include/configs/zynq_zc70x.h | 28 ++++ include/configs/zynq_zc770.h | 39 +++++ include/configs/zynq_zed.h | 26 ++++ 20 files changed, 624 insertions(+), 141 deletions(-) create mode 100644 arch/arm/dts/zynq-7000.dtsi create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h create mode 100644 board/xilinx/dts/zynq-microzed.dts create mode 100644 board/xilinx/dts/zynq-zc702.dts create mode 100644 board/xilinx/dts/zynq-zc706.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts create mode 100644 board/xilinx/dts/zynq-zed.dts create mode 100644 doc/README.zynq create mode 100644 include/configs/zynq-common.h delete mode 100644 include/configs/zynq.h create mode 100644 include/configs/zynq_microzed.h create mode 100644 include/configs/zynq_zc70x.h create mode 100644 include/configs/zynq_zc770.h create mode 100644 include/configs/zynq_zed.h -- 1.8.3

3 3

[U-Boot] [PATCH] net/fm: fix ft_fixup_xgec with checking enablement
by Shengzhou Liu 08 Jan '14

08 Jan '14

We should check if the 10G port is enabled when we update dynamically the corresponding dual-role MAC node in device tree. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- drivers/net/fm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index a759892..35a1ac7 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -276,7 +276,8 @@ static int ft_fixup_xgec(void *blob, struct fm_eth_info *info) #define FM1_10GEC3_TX_PORT_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4a8000) #define FM1_10GEC3_MAC_ADDR (CONFIG_SYS_CCSRBAR_PHYS + 0x4e0000) - if ((info->port == FM1_10GEC3) || (info->port == FM1_10GEC4)) { + if (((info->port == FM1_10GEC3) || (info->port == FM1_10GEC4)) && + info->enabled) { ci = (info->port == FM1_10GEC3) ? 2 : 3; i = (info->port == FM1_10GEC3) ? 0 : 1; -- 1.8.0

1 0