September 2012 - U-Boot

[U-Boot] fw_printenv is not working
by mateer 22 Oct '12

22 Oct '12

Hi, when i run fw_printenv , its not working..It shows:- fw_printenv: line 1: syntax error: "(" unexpected error... Let me tell you what i did... 1) i copy the u-boot source code from my colleague and copy in my hard disk. 2) After then i set the environment through commnads. the commands which i run are # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3_evm_config # make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm 3) After then i go to /tools/env, where i configure the fw_env.config and then run make command. 4) After ruuning the command i got crc32.c and fw_printenv. 5)i copied the fw_printenv into the SD-Card and insert the card into the OMAP3EVM board. 6) after then when i use the command ./fw_printenv it throws the error fw_printenv: line 1: syntax error: "(" unexpected error.. Can u please help me what i have to do... I think i am doing something wrong... -- View this message in context: http://old.nabble.com/fw_printenv-is-not-working-tp29297562p29297562.html Sent from the Uboot - Users mailing list archive at Nabble.com.

4 3

[U-Boot] [PATCH 0/6] am335x_evm: Enable UART{1,2,4,5}
by Andrew Bradford 21 Oct '12

21 Oct '12

To support serial ports other than UART0 on am335x based systems like the Beaglebone with the RS232 cape. Patch 4 is not the proper way to do what I want to accomplish but should give the idea I was going after. If someone could give me some pointers on the best way to do this, I'd welcome it. Thanks Andrew Bradford (6): am33xx: Enable UART{1,2,4,5} clocks am33xx: Enable UART{1,2,4,5} pin-mux serial: Enable up to 6 eserial devices console & omap-common/spl: Enable use of eserial am33xx: Enable eserial device usage for ns16550 am335x_evm: Enable use of UART{1,2,4,5} arch/arm/cpu/armv7/am33xx/board.c | 14 +++++++++ arch/arm/cpu/armv7/am33xx/clock.c | 28 +++++++++++++++++ arch/arm/cpu/armv7/omap-common/spl.c | 7 ++++- arch/arm/include/asm/arch-am33xx/sys_proto.h | 6 +++- board/ti/am335x/mux.c | 43 ++++++++++++++++++++++++++ boards.cfg | 4 +++ common/console.c | 24 +++++++++++--- common/serial.c | 6 ++++ drivers/serial/serial.c | 39 ++++++++++++++++++++--- include/common.h | 5 +++ include/configs/am335x_evm.h | 28 ++++++++++++++++- include/serial.h | 4 ++- 12 files changed, 196 insertions(+), 12 deletions(-) -- 1.7.10

4 22

[U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard
by Simon Glass 20 Oct '12

20 Oct '12

This series adds support for the Tegra2x's display peripheral. This supports the LCD display on Seaboard and we use this to enable console output in U-Boot on the LCD. Configuration is via the device tree. Proposed bindings are included in this series, taken from pwm bindings that should be in linux-next, a Tegra video binding that might be accepted in devicetree-discuss and a proposed video mode binding posted to dri-devel. While I agree EDID is convenient for machines I would prefer to provide a user-friendly way of selecting LCD settings as well, with EDID more as a fallback and auto-detection when available. To improve performance two optimisations are offered: 1. The LCD frame buffer is cached, with the cache being flushed after each newline sent to putc(), and in a few other situations. This dramatically increases performance (around 10x). This requires a few additions to the ARM cache support. 2. The console supports scrolling in steps of more than 1 line. This speeds up scrolling output considerably, particularly commands like 'printenv' which display a lot of output, and particular when the dcache is off. This requires a new CONFIG and a change to the console_scrollup() function. Changes in v2: - Add new patch to use const in pinmux_config_pingroup/table() - Add nvidia prefix to device tree properties - Align tegra display using new CONFIG_LCD_ALIGNMENT feature - Put the LCD cache flush logic into lcd_putc() instead of lcd_puts() - Update LCD driver to deal with new fdt bindings - Update seaboard LCD definitions for new fdt binding - Use a more generic config CONFIG_LCD_ALIGNMENT for lcd alignment - Use const where possible in funcmux Changes in v3: - Add new commit for pwm binding and node - Add new panel binding to fit with tegra display controller binding - Add probe function to read in fdt parameters in display driver - Add separate call to pwm_init() in board_init() - Adjust LCD driver to use new SOC display driver structures - Bring in proposed tegra display controller binding - Decode fdt node within the pwm driver - Fix tiny bug in mult-line lcd scrolling - Handle a cached frame buffer out of normal U-Boot memory - Introduce concept of a pwm channel, rather than separate peripherals - Move some fdt decode code from LCD driver to SOC display driver - Put the LCD cache flush logic back into lcd_puts() - Remove LPW1 pin which is not needed by display - Remove spurious newline from fdtdec_get_addr() debug output - Rename fdt config structures - Rename pwfm driver to pwm - Separate display driver and LCD driver more in fdt - Tidy up fdtdec_decode_gpios() debug output - Use displaymode binding for fdt - Use new proposed upstream pwm binding - Use new pwm binding from pre-linux-next - Use new upstream proposed LCD definitions Mayuresh Kulkarni (1): tegra: Enable display/lcd support on Seaboard Simon Glass (16): fdt: Tidy debugging, add to fdtdec_get_int/addr() fdt: Add header guard to fdtdec.h tegra: Use const for pinmux_config_pingroup/table() tegra: Add display support to funcmux tegra: fdt: Add pwm binding and node tegra: fdt: Add LCD definitions for Tegra tegra: Add support for PWM tegra: Add LCD driver tegra: Add LCD support to Nvidia boards arm: Add control over cachability of memory regions lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment lcd: Add support for flushing LCD fb from dcache after update tegra: Align LCD frame buffer to section boundary tegra: Support control of cache settings for LCD tegra: fdt: Add LCD definitions for Seaboard lcd: Add CONSOLE_SCROLL_LINES option to speed console Wei Ni (1): tegra: Add SOC support for display/lcd README | 16 + arch/arm/cpu/armv7/cache_v7.c | 11 + arch/arm/cpu/armv7/tegra2/Makefile | 1 + arch/arm/cpu/armv7/tegra2/display.c | 389 +++++++++++++++++ arch/arm/cpu/armv7/tegra2/funcmux.c | 38 ++ arch/arm/cpu/armv7/tegra2/pinmux.c | 4 +- arch/arm/cpu/armv7/tegra2/pwm.c | 99 +++++ arch/arm/dts/tegra20.dtsi | 96 +++++ arch/arm/include/asm/arch-tegra2/dc.h | 544 ++++++++++++++++++++++++ arch/arm/include/asm/arch-tegra2/display.h | 152 +++++++ arch/arm/include/asm/arch-tegra2/pinmux.h | 4 +- arch/arm/include/asm/arch-tegra2/pwm.h | 75 ++++ arch/arm/include/asm/system.h | 30 ++ arch/arm/lib/cache-cp15.c | 62 +++- board/nvidia/common/board.c | 24 +- board/nvidia/dts/tegra2-seaboard.dts | 32 ++ common/lcd.c | 86 +++- doc/device-tree-bindings/pwm/tegra20-pwm.txt | 18 + doc/device-tree-bindings/video/displaymode.txt | 42 ++ doc/device-tree-bindings/video/tegra20-dc.txt | 89 ++++ drivers/video/Makefile | 1 + drivers/video/tegra.c | 368 ++++++++++++++++ include/configs/seaboard.h | 11 +- include/configs/tegra2-common.h | 3 + include/fdtdec.h | 5 + include/lcd.h | 11 + lib/fdtdec.c | 29 +- 27 files changed, 2199 insertions(+), 41 deletions(-) create mode 100644 arch/arm/cpu/armv7/tegra2/display.c create mode 100644 arch/arm/cpu/armv7/tegra2/pwm.c create mode 100644 arch/arm/include/asm/arch-tegra2/dc.h create mode 100644 arch/arm/include/asm/arch-tegra2/display.h create mode 100644 arch/arm/include/asm/arch-tegra2/pwm.h create mode 100644 doc/device-tree-bindings/pwm/tegra20-pwm.txt create mode 100644 doc/device-tree-bindings/video/displaymode.txt create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt create mode 100644 drivers/video/tegra.c -- 1.7.7.3

9 64

[U-Boot] [PATCH] arm: fdt: Relocate fdt along with other data
by Simon Glass 19 Oct '12

19 Oct '12

Rather than leave the fdt down next to the code/data, we really should relocate it along with everything else. For CONFIG_OF_EMBED this happens automatically, but for CONFIG_OF_SEPARATE it does not. Add code to copy the fdt and point to the new copy after relocation. Signed-off-by: Simon Glass <sjg(a)chromium.org> --- arch/arm/lib/board.c | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 109a1ac..6dca891 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -274,6 +274,8 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_PRAM ulong reg; #endif + void *new_fdt = NULL; + size_t fdt_size = 0; bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); @@ -409,6 +411,22 @@ void board_init_f(ulong bootflag) debug("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); +#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) + /* + * If the device tree is sitting immediate above our image then we + * must relocate it. If it is embedded in the data section, then it + * will be relocated with other data. + */ + if (gd->fdt_blob) { + fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); + + addr_sp -= fdt_size; + new_fdt = (void *)addr_sp; + debug("Reserving %zu Bytes for FDT at: %08lx\n", + fdt_size, addr_sp); + } +#endif + /* setup stackpointer for exeptions */ gd->irq_sp = addr_sp; #ifdef CONFIG_USE_IRQ @@ -442,6 +460,10 @@ void board_init_f(ulong bootflag) gd->start_addr_sp = addr_sp; gd->reloc_off = addr - _TEXT_BASE; debug("relocation Offset is: %08lx\n", gd->reloc_off); + if (new_fdt) { + memcpy(new_fdt, gd->fdt_blob, fdt_size); + gd->fdt_blob = new_fdt; + } memcpy(id, (void *)gd, sizeof(gd_t)); relocate_code(addr_sp, id, addr); -- 1.7.7.3

3 2

[U-Boot] [PATCH 0/9 V2] EXYNOS5: Add Audio support
by Rajeshwari Shinde 19 Oct '12

19 Oct '12

This patchset adds the audio support for EXYNOS5. This patchset plays a predefined beep sound. This patchset is based on the following patches: "[U-Boot] [PATCH 1/7 V4] EXYNOS5: Add pinmux support for SPI" "[U-Boot] [PATCH 4/7 V3] EXYNOS5: Add base address for SPI" "[U-Boot] [PATCH 3/7 V3] EXYNOS: Add clock for SPI" Changes in V2: - renamed i2s.c to samsung-i2s.c. - made exynos_i2s_config pinmux function static. - corrected the commit message for "Enable sound" patch. Rajeshwari Shinde (9): SOUND: Add I2S driver SOUND: Add WM8994 codec Sound: Add command for audio playback EXYNOS: Add I2S registers EXYNOS: Add parameters required by I2S EXYNOS: Add pinmux for I2S EXYNOS: Add I2S base address EXYNOS: Add clock for I2S SMDK5250: Enable Sound Makefile | 1 + arch/arm/cpu/armv7/exynos/clock.c | 119 ++++ arch/arm/cpu/armv7/exynos/pinmux.c | 12 + arch/arm/include/asm/arch-exynos/clk.h | 3 + arch/arm/include/asm/arch-exynos/clock.h | 29 + arch/arm/include/asm/arch-exynos/cpu.h | 3 + arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 +++ arch/arm/include/asm/arch-exynos/periph.h | 1 + arch/arm/include/asm/arch-exynos/sound.h | 44 ++ common/Makefile | 1 + common/cmd_sound.c | 90 +++ drivers/sound/Makefile | 48 ++ drivers/sound/samsung-i2s.c | 358 ++++++++++++ drivers/sound/sound.c | 220 ++++++++ drivers/sound/wm8994.c | 781 +++++++++++++++++++++++++++ drivers/sound/wm8994.h | 87 +++ drivers/sound/wm8994_registers.h | 299 ++++++++++ include/configs/smdk5250.h | 8 + include/i2s.h | 127 +++++ include/sound.h | 62 +++ 20 files changed, 2359 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h create mode 100644 arch/arm/include/asm/arch-exynos/sound.h create mode 100644 common/cmd_sound.c create mode 100644 drivers/sound/Makefile create mode 100644 drivers/sound/samsung-i2s.c create mode 100644 drivers/sound/sound.c create mode 100644 drivers/sound/wm8994.c create mode 100644 drivers/sound/wm8994.h create mode 100644 drivers/sound/wm8994_registers.h create mode 100644 include/i2s.h create mode 100644 include/sound.h -- 1.7.4.4

5 23

[U-Boot] [PATCH 0/2] Support for msm7x27a board
by srikanth.reddy＠lntinfotech.com 19 Oct '12

19 Oct '12

From: Srikanth Reddy Vintha <srikanth.reddy(a)lntinfotech.com> This patch series contains the following support for msm7x27a * support for msm7x27a soc * support for msm7x27a surf board. Srikanth Reddy Vintha (2): MSM7x27a: Add support for qualcomm msm7x27a SOC. MSM7x27a: Add support for msm7x27a surf board arch/arm/cpu/armv7/msm7x27a/Makefile | 53 ++++ arch/arm/cpu/armv7/msm7x27a/acpuclock.c | 249 +++++++++++++++ arch/arm/cpu/armv7/msm7x27a/board.c | 66 ++++ arch/arm/cpu/armv7/msm7x27a/config.mk | 21 ++ arch/arm/cpu/armv7/msm7x27a/gpio.c | 284 +++++++++++++++++ arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S | 118 +++++++ arch/arm/cpu/armv7/msm7x27a/timer.c | 127 ++++++++ arch/arm/include/asm/arch-msm7x27a/gpio.h | 47 +++ arch/arm/include/asm/arch-msm7x27a/iomap.h | 105 +++++++ arch/arm/include/asm/arch-msm7x27a/mmc.h | 399 ++++++++++++++++++++++++ arch/arm/include/asm/arch-msm7x27a/proc_comm.h | 42 +++ arch/arm/include/asm/arch-msm7x27a/sys_proto.h | 27 ++ board/qcom/msm7x27a_surf/Makefile | 56 ++++ board/qcom/msm7x27a_surf/msm7x27a_surf.c | 126 ++++++++ board/qcom/msm7x27a_surf/msm7x27a_surf.h | 27 ++ boards.cfg | 1 + include/configs/msm7x27a_surf.h | 128 ++++++++ 17 files changed, 1876 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/msm7x27a/Makefile create mode 100644 arch/arm/cpu/armv7/msm7x27a/acpuclock.c create mode 100644 arch/arm/cpu/armv7/msm7x27a/board.c create mode 100644 arch/arm/cpu/armv7/msm7x27a/config.mk create mode 100644 arch/arm/cpu/armv7/msm7x27a/gpio.c create mode 100644 arch/arm/cpu/armv7/msm7x27a/lowlevel_init.S create mode 100644 arch/arm/cpu/armv7/msm7x27a/timer.c create mode 100644 arch/arm/include/asm/arch-msm7x27a/gpio.h create mode 100644 arch/arm/include/asm/arch-msm7x27a/iomap.h create mode 100644 arch/arm/include/asm/arch-msm7x27a/mmc.h create mode 100644 arch/arm/include/asm/arch-msm7x27a/proc_comm.h create mode 100644 arch/arm/include/asm/arch-msm7x27a/sys_proto.h create mode 100644 board/qcom/msm7x27a_surf/Makefile create mode 100644 board/qcom/msm7x27a_surf/msm7x27a_surf.c create mode 100644 board/qcom/msm7x27a_surf/msm7x27a_surf.h create mode 100644 include/configs/msm7x27a_surf.h

2 4

[U-Boot] [PATCH 0/1] versatile/vexpress: board configs: Use buffered writes on Flash
by Jagannadha Sutradharudu Teki 18 Oct '12

18 Oct '12

Current writes on nor flash uses normal flash write calls due to this writing to NOR is very slow, so I was enabled buffered writes and tested on QEMU. Regards, Jagan. Jagannadha Sutradharudu Teki (2): image/FIT: Add ramdisk load, entry address and OS tag inclusion versatile: board configs: Use buffered writes on flash common/image.c | 7 ++++--- include/configs/ca9x4_ct_vxp.h | 2 ++ include/configs/versatile.h | 1 + 3 files changed, 7 insertions(+), 3 deletions(-)

2 2

[U-Boot] [PATCH] powerpc/usb: fix bug of CPU halt when missing USB PHY clock
by Shengzhou Liu 18 Oct '12

18 Oct '12

when missing USB PHY clock and issuing "usb start" at u-boot prompt, writing to or_portsc register will cause CPU halt. We should check USBGP[PHY_CLK_VALID] bit at the first time in ehci_hcd_init() to avoid CPU hang in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu(a)freescale.com> --- drivers/usb/host/ehci-fsl.c | 22 +++++++++++++++++++--- 1 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b2d294e..cc29375 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -31,6 +31,18 @@ #include "ehci.h" #include "ehci-core.h" +/* Check USB PHY clock valid */ +static int usb_phy_clk_valid(struct usb_ehci *ehci) +{ + if ((!(in_be32(&ehci->control) & PHY_CLK_VALID)) && + (!in_be32(&ehci->prictrl))) { + printf("WARNING: USB PHY clock invalid\n"); + return 0; + } else { + return 1; + } +} + /* * Create the appropriate control structures to manage * a new EHCI host controller. @@ -59,6 +71,9 @@ int ehci_hcd_init(void) out_be32(&ehci->snoop1, SNOOP_SIZE_2GB); out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); + /* Enable interface. */ + setbits_be32(&ehci->control, USB_EN); + /* Init phy */ if (hwconfig_sub("usb1", "phy_type")) phy_type = hwconfig_subarg("usb1", "phy_type", &len); @@ -82,6 +97,8 @@ int ehci_hcd_init(void) setbits_be32(&ehci->control, UTMI_PHY_EN); udelay(1000); /* delay required for PHY Clk to appear */ #endif + if (!usb_phy_clk_valid(ehci)) + return -1; out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI); } else { #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) @@ -89,12 +106,11 @@ int ehci_hcd_init(void) setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); udelay(1000); /* delay required for PHY Clk to appear */ #endif + if (!usb_phy_clk_valid(ehci)) + return -1; out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI); } - /* Enable interface. */ - setbits_be32(&ehci->control, USB_EN); - out_be32(&ehci->prictrl, 0x0000000c); out_be32(&ehci->age_cnt_limit, 0x00000040); out_be32(&ehci->sictrl, 0x00000001); -- 1.6.4

4 8

[U-Boot] [PATCH 0/1] Delete sbc8650 / sbc8540 support.
by Paul Gortmaker 17 Oct '12

17 Oct '12

This old board has already been deleted from the linux kernel. Sending this 0/1 so that I can include a pull request. The following patch has been formatted with "--irreversible-delete" so that it does not contain all the meaningless deleted lines in the mailout to the list. However "git-am" does not (yet) know how to apply such a patch[1]. So I also have a pull req. below. Thanks, Paul. [1] http://marc.info/?l=git&m=134394003916648&w=2 -- The following changes since commit ee1f4caaa2a3f79d692155eec8a4c7289d60e106: Prepare v2012.10-rc1 (2012-09-21 17:18:28 -0700) are available in the git repository at: git://openlinux.windriver.com/people/paulg/u-boot.git delete-sbc8560 for you to fetch changes up to 48d1357355588946a1b2bda337dc0fd7b3b48256: powerpc: delete Wind River SBC8560/8540 support (2012-09-24 13:30:53 -0400) ---------------------------------------------------------------- Paul Gortmaker (1): powerpc: delete Wind River SBC8560/8540 support MAINTAINERS | 2 - board/sbc8560/Makefile | 50 ----- board/sbc8560/README | 57 ------ board/sbc8560/ddr.c | 43 ----- board/sbc8560/law.c | 60 ------ board/sbc8560/sbc8560.c | 369 ------------------------------------- board/sbc8560/tlb.c | 65 ------- boards.cfg | 6 - include/configs/SBC8540.h | 428 ------------------------------------------ include/configs/sbc8560.h | 459 ---------------------------------------------- 10 files changed, 1539 deletions(-) delete mode 100644 board/sbc8560/Makefile delete mode 100644 board/sbc8560/README delete mode 100644 board/sbc8560/ddr.c delete mode 100644 board/sbc8560/law.c delete mode 100644 board/sbc8560/sbc8560.c delete mode 100644 board/sbc8560/tlb.c delete mode 100644 include/configs/SBC8540.h delete mode 100644 include/configs/sbc8560.h -- 1.7.12.1

2 2

[U-Boot] [PATCH] mx5: Add workaround for ARM erratum ID 468414
by Fabio Estevam 17 Oct '12

17 Oct '12

From: Fabio Estevam <fabio.estevam(a)freescale.com> Add the software workaround for ARM erratum ID 468414. According to mx53/mx51 errata document: "ENGcm11133 - ARM: NEON load data can be incorrectly forwarded to a subsequent request Description: Under very specific set of conditions, data from a Neon load request can be incorrectly forwarded to a subsequent, unrelated memory request. The conditions are as follows: • Neon loads and stores must be in use • Neon L1 caching must be disabled • Trustzone must be configured and in use • The secure memory address space and the non-secure memory address space both use the same physical addresses, either as an alias or the same memory location or for separate memory locations The issue is reported by ARM, erratum ID 468414, Category 2" Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 683a7b5..c1a04db 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -24,6 +24,13 @@ #include <generated/asm-offsets.h> #include <linux/linkage.h> +.macro init_arm_erratum + /* ARM erratum ID #468414 */ + mrc 15, 0, r1, c1, c0, 1 + orr r1, r1, #(1 << 5) /* enable L1NEON bit */ + mcr 15, 0, r1, c1, c0, 1 +.endm + /* * L2CC Cache setup/invalidation/disable */ @@ -338,6 +345,8 @@ ENTRY(lowlevel_init) str r1, [r0, #0x4] #endif + init_arm_erratum + init_l2cc init_aips -- 1.7.1

2 2