September 2012 - U-Boot

[U-Boot] [PATCH] mmc: Remove unused item flags in struct mmc_cmd
by Kaspter Ju 02 Sep '12

02 Sep '12

Signed-off-by: Kaspter Ju <nigh0st3018(a)gmail.com> --- drivers/mmc/mmc.c | 28 ---------------------------- include/mmc.h | 1 - 2 files changed, 29 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index aebe578..fdfa920 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -151,7 +151,6 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) printf("CMD_SEND:%d\n", cmd->cmdidx); printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); - printf("\t\tFLAG\t\t\t %d\n", cmd->flags); ret = mmc->send_cmd(mmc, cmd, data); switch (cmd->resp_type) { case MMC_RSP_NONE: @@ -213,7 +212,6 @@ int mmc_send_status(struct mmc *mmc, int timeout) cmd.resp_type = MMC_RSP_R1; if (!mmc_host_is_spi(mmc)) cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; do { err = mmc_send_cmd(mmc, &cmd, NULL); @@ -253,7 +251,6 @@ int mmc_set_blocklen(struct mmc *mmc, int len) cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = len; - cmd.flags = 0; return mmc_send_cmd(mmc, &cmd, NULL); } @@ -299,7 +296,6 @@ static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) cmd.cmdidx = start_cmd; cmd.cmdarg = start; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -381,7 +377,6 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) cmd.cmdarg = start * mmc->write_bl_len; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; data.src = src; data.blocks = blkcnt; @@ -400,7 +395,6 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; - cmd.flags = 0; if (mmc_send_cmd(mmc, &cmd, NULL)) { printf("mmc fail to send stop cmd\n"); return 0; @@ -454,7 +448,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) cmd.cmdarg = start * mmc->read_bl_len; cmd.resp_type = MMC_RSP_R1; - cmd.flags = 0; data.dest = dst; data.blocks = blkcnt; @@ -468,7 +461,6 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; - cmd.flags = 0; if (mmc_send_cmd(mmc, &cmd, NULL)) { printf("mmc fail to send stop cmd\n"); return 0; @@ -520,7 +512,6 @@ int mmc_go_idle(struct mmc* mmc) cmd.cmdidx = MMC_CMD_GO_IDLE_STATE; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_NONE; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -543,7 +534,6 @@ sd_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -584,7 +574,6 @@ sd_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_READ_OCR; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -613,7 +602,6 @@ int mmc_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SEND_OP_COND; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -633,8 +621,6 @@ int mmc_send_op_cond(struct mmc *mmc) if (mmc->host_caps & MMC_MODE_HC) cmd.cmdarg |= OCR_HCS; - cmd.flags = 0; - err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -650,7 +636,6 @@ int mmc_send_op_cond(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_READ_OCR; cmd.resp_type = MMC_RSP_R3; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -678,7 +663,6 @@ int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) cmd.cmdidx = MMC_CMD_SEND_EXT_CSD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; data.dest = ext_csd; data.blocks = 1; @@ -702,7 +686,6 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | (index << 16) | (value << 8); - cmd.flags = 0; ret = mmc_send_cmd(mmc, &cmd, NULL); @@ -795,7 +778,6 @@ int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) cmd.cmdarg = (mode << 31) | 0xffffff; cmd.cmdarg &= ~(0xf << (group * 4)); cmd.cmdarg |= value << (group * 4); - cmd.flags = 0; data.dest = (char *)resp; data.blocksize = 64; @@ -824,7 +806,6 @@ int sd_change_freq(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -834,7 +815,6 @@ int sd_change_freq(struct mmc *mmc) cmd.cmdidx = SD_CMD_APP_SEND_SCR; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - cmd.flags = 0; timeout = 3; @@ -987,7 +967,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 1; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1000,7 +979,6 @@ int mmc_startup(struct mmc *mmc) MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ cmd.resp_type = MMC_RSP_R2; cmd.cmdarg = 0; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1018,7 +996,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; cmd.cmdarg = mmc->rca << 16; cmd.resp_type = MMC_RSP_R6; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1033,7 +1010,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SEND_CSD; cmd.resp_type = MMC_RSP_R2; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -1110,7 +1086,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_SELECT_CARD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1177,7 +1152,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) @@ -1186,7 +1160,6 @@ int mmc_startup(struct mmc *mmc) cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 2; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); if (err) return err; @@ -1267,7 +1240,6 @@ int mmc_send_if_cond(struct mmc *mmc) /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa; cmd.resp_type = MMC_RSP_R7; - cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); diff --git a/include/mmc.h b/include/mmc.h index 2305986..23e40a5 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -213,7 +213,6 @@ struct mmc_cmd { uint resp_type; uint cmdarg; uint response[4]; - uint flags; }; struct mmc_data { -- 1.7.9.5

2 1

[U-Boot] [PULL] u-boot-usb/master
by Marek Vasut 02 Sep '12

02 Sep '12

Dear Wolfgang Denk, This is a patch collection I accumulated in u-boot-usb/master, please apply to u-boot/master . btw. nice to have you back ;-) The following changes since commit 27e301e5b7df6254c768d27130d3a36c31d55c96: CREDITS: Add credits for MCF5249 initialization code (2012-09-01 14:50:09 +0200) are available in the git repository at: git://git.denx.de/u-boot-usb.git master for you to fetch changes up to 8c8650181904cee37721fa303622cd37255d51d6: MUSB driver: Timeout is never detected as the while loop does not end (2012-09-01 16:21:53 +0200) ---------------------------------------------------------------- Benoît Thébaudeau (8): ehci: cosmetic: Define the number of qt_buffers ehci: Fail for multi-transaction interrupt transfers ehci: cosmetic: Define used constants ehci-hcd: Boost transfer speed usb_storage: Restore non-EHCI support usb_storage: Remove EHCI constraints usb_stor_BBB_transport: Do not delay when not required ehci: Optimize qTD allocations Jim Shimer (1): usb: Optimize USB storage read/write Lucas Stach (1): usb: fix ulpi_set_vbus prototype Lukasz Majewski (7): dfu:usb: Support for g_dnl composite download gadget. dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget dfu: DFU backend implementation dfu: MMC specific routines for DFU operation dfu:cmd: Support for DFU u-boot command arm:trats: Support for USB UDC driver at TRATS board. arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS Matej Frančeškin (1): MUSB driver: Timeout is never detected as the while loop does not end Troy Kisky (1): USB: Fix strict aliasing in ohci-hcd Łukasz Dałek (1): pxa25x: Add UDC registers definitions Makefile | 1 + arch/arm/include/asm/arch-pxa/regs-usb.h | 159 +++++++++++++++++ board/samsung/trats/trats.c | 8 + common/Makefile | 1 + common/cmd_dfu.c | 81 +++++++++ common/usb_storage.c | 58 +++---- drivers/dfu/Makefile | 44 +++++ drivers/dfu/dfu.c | 238 +++++++++++++++++++++++++ drivers/dfu/dfu_mmc.c | 162 +++++++++++++++++ drivers/usb/gadget/Makefile | 2 + drivers/usb/gadget/f_dfu.c | 749 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/gadget/f_dfu.h | 100 +++++++++++ drivers/usb/gadget/g_dnl.c | 202 ++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 305 ++++++++++++++++++++++---------- drivers/usb/host/ehci.h | 60 ++++++- drivers/usb/host/ohci-hcd.c | 70 ++++---- drivers/usb/musb/musb_hcd.c | 2 +- include/configs/trats.h | 24 ++- include/dfu.h | 103 +++++++++++ include/g_dnl.h | 33 ++++ include/usb/ulpi.h | 2 +- 21 files changed, 2236 insertions(+), 168 deletions(-) create mode 100644 arch/arm/include/asm/arch-pxa/regs-usb.h create mode 100644 common/cmd_dfu.c create mode 100644 drivers/dfu/Makefile create mode 100644 drivers/dfu/dfu.c create mode 100644 drivers/dfu/dfu_mmc.c create mode 100644 drivers/usb/gadget/f_dfu.c create mode 100644 drivers/usb/gadget/f_dfu.h create mode 100644 drivers/usb/gadget/g_dnl.c create mode 100644 include/dfu.h create mode 100644 include/g_dnl.h

2 1

[U-Boot] [PATCH v3] patman: Do not Cc addresses included in To list
by Otavio Salvador 02 Sep '12

02 Sep '12

In case an address is listed in the To list, those will be skipped on Cc list or user might end with a duplicated message. This fixes the case when a tag points to same address used as series destination thus avoiding duplicated sending. Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- Changes in v2: - use if 'to' in self: to remove the try block Changes in v3: - readd try / except block to handle the valid error tools/patman/series.py | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/tools/patman/series.py b/tools/patman/series.py index eda1e9b..7829dc7 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -114,6 +114,13 @@ class Series(dict): cc_list += gitutil.BuildEmailList(commit.tags) cc_list += gitutil.BuildEmailList(commit.cc_list) + # Skip items in To list + if 'to' in self: + try: + map(cc_list.remove, gitutil.BuildEmailList(self.to)) + except ValueError: + pass + for email in cc_list: if email == None: email = col.Color(col.YELLOW, "<alias '%s' not found>" -- 1.7.10.4

2 1

[U-Boot] [PATCH] patman: Allow for changelog use in first version of a series
by Otavio Salvador 02 Sep '12

02 Sep '12

When a patchset had a RFC series, a v1 might have a changelog of changes done since the RFC. The patch changes the range checked for changelog and allow it to start for version 1. Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- tools/patman/series.py | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/tools/patman/series.py b/tools/patman/series.py index 05d9e73..eda1e9b 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -174,12 +174,13 @@ class Series(dict): col = terminal.Color() if self.get('version'): changes_copy = dict(self.changes) - for version in range(2, int(self.version) + 1): + for version in range(1, int(self.version) + 1): if self.changes.get(version): del changes_copy[version] else: - str = 'Change log missing for v%d' % version - print col.Color(col.RED, str) + if version > 1: + str = 'Change log missing for v%d' % version + print col.Color(col.RED, str) for version in changes_copy: str = 'Change log for unknown version v%d' % version print col.Color(col.RED, str) -- 1.7.10.4

3 2

[U-Boot] Redundant Env
by Sridhar Addagada 02 Sep '12

02 Sep '12

When enabling HAVE_REDUND in uboot-tools, will it work if i have the redundant partition in the same sector #define DEVICE1_NAME "/dev/mtd1" #define DEVICE2_NAME "/dev/mtd1" #define DEVICE1_OFFSET 0x00000 #define ENV1_SIZE 0x10000 #define DEVICE1_ESIZE 0x20000 #define DEVICE1_ENVSECTORS 1 #define DEVICE2_OFFSET 0x00000 #define ENV2_SIZE 0x10000 #define DEVICE2_ESIZE 0x20000 // erase size is 128K #define DEVICE2_ENVSECTORS 1 Thanks Sridhar

2 2

[U-Boot] [PATCH 0/6] stdio: Clean up
by Marek Vasut 02 Sep '12

02 Sep '12

Clean up a few things in STDIO. Mostly, don't export structures directly, but introduce some kind of accessors if needed and remove dead code. NOTE: I'm still working on the "compile tested on 2 different architectures" part. I'll keep you posted about that. I'd be glad for a review though. I'd hate to pull in logic errors, especially into such critical code. NOTE2: Cross-posting cover to DM list, so I get feedback from those guys. Marek Vasut (6): stdio: dm: Murder dead code in console.c stdio: dm: Add accessors to stdio_devices[] stdio: dm: Make stdio_devices[] local stdio: dm: Add stdio_fd_to_name() call stdio: dm: Use stdio_fd_to_name() call to localize stdio_names stdio: dm: Optimize stdio_print_current_devices() common/cmd_console.c | 8 ++--- common/cmd_terminal.c | 9 ++++-- common/console.c | 84 ++++++++++++++++++++++++++----------------------- common/fdt_support.c | 8 ++++- common/stdio.c | 46 +++++++++++++++++++++++++-- include/stdio_dev.h | 9 ++---- 6 files changed, 110 insertions(+), 54 deletions(-) Cc: Wolfgang Denk <wd(a)denx.de> Cc: u-boot-dm(a)lists.denx.de -- 1.7.10.4

3 16

[U-Boot] Commit 94e8652a664f01cffb1f0abb0b114261c03a234d breaks tnetv107x_evm?
by Albert ARIBAUD 02 Sep '12

02 Sep '12

Tom, Stephen, I am surprised because I keep copy-pastes of my builds, and this one does not appear in recent copy-pastes, so even though I double-checked on my local u-boot-arm repository, I need confirmation from someone else. In u-boot-arm, commit 94e8652a664f01cffb1f0abb0b114261c03a234d breaks tnetv107x_evm: Configuring for tnetv107x_evm board... arm-linux-gnueabi-size: './build/tnetv107x_evm/u-boot': No such file arch/arm/cpu/arm1176/tnetv107x/libtnetv107x.o: In function `arch_cpu_init': /home/albert/src/u-boot-arm/arch/arm/cpu/arm1176/tnetv107x/init.c:32: multiple definition of `arch_cpu_init' arch/arm/cpu/arm1176/libarm1176.o:/home/albert/src/u-boot-arm/arch/arm/cpu/arm1176/cpu.c:70: first defined here make: *** [/home/albert/src/u-boot-arm/build/tnetv107x_evm/u-boot] Error 1 Parent 94d9bfe70d5b93af8005c52314a9388306053faf builds tnetv107x_evm fine. Tom (as the commit originates from staging/trini(a)ti.com) or Stephen (as the author of the commit), can you please confirm the issue? If the issue is confirmed: Stephen, can you look into a fix and submit a patch for this? Apologies for not noticing this earlier. Amicalement, -- Albert.

2 1

[U-Boot] Pull request: u-boot-staging
by Anatolij Gustschin 02 Sep '12

02 Sep '12

Hello Wolfgang, The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127: zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200) are available in the git repository at: git://git.denx.de/u-boot-staging.git agust(a)denx.de Khem Raj (1): config: Always use GNU ld Luka Perkov (1): tools: add kwboot binary to .gitignore file Michal Simek (2): serial: CONSOLE macro is not used fdt: Include arch specific gpio.h instead of asm-generic/gpio.h Vikram Narayanan (1): tx25: Use generic gpio_* calls board/karo/tx25/tx25.c | 25 +++++++++---------------- config.mk | 6 +++++- drivers/serial/serial.c | 3 --- lib/fdtdec.c | 3 +-- tools/.gitignore | 1 + 5 files changed, 16 insertions(+), 22 deletions(-) Please pull. Thanks! Anatolij

2 1

[U-Boot] Pull request: u-boot-arm/master
by Albert ARIBAUD 02 Sep '12

02 Sep '12

Hi Wolfgang, The following changes since commit 27e301e5b7df6254c768d27130d3a36c31d55c96: CREDITS: Add credits for MCF5249 initialization code (2012-09-01 14:50:09 +0200) are available in the git repository at: git://git.denx.de/u-boot-arm master for you to fetch changes up to df95321ca1b06a6271c3959b371848c10019e165: at91: 9x5: Enable PMECC for 5series ek board. (2012-09-01 17:06:15 +0200) ---------------------------------------------------------------- Albert ARIBAUD (1): Revert "arm: armv7: add compile option -mno-unaligned-access if available" Allen Martin (16): tegra20: rename tegra2 -> tegra20 tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common tegra20: rename CONFIG_MACH_TEGRA_GENERIC tegra20: tec: add tegra20-common-post.h tegra20: make board mkdir commands unconditional mkconfig: remove bashisms and cleanup config.mk generation MAKEALL: update to work with new boards.cfg syntax ARM: Fix arm720t SPL build tegra20: remove timer_init from SPL build ARM: add tegra20 support to arm720t tegra20: add u-boot-*-tegra.bin targets tegra20: move SDRAM param save to later in boot tegra20: enable SPL for tegra20 boards arm: enable libgcc build for SPL spl: fix SPL build of private libgcc tegra20: Remove armv4t build flags Andreas Bießmann (6): doc/git-mailrc: update at91 and avr32 MAINTAINERS: fix entry of Ilko Iliev MAINTAINERS: fix Andreas Bießmann AVR32 entry at91sam9263ek: fix 'update' script at91sam9263ek: remove unnecessary console_init_f arm:at91-boards: remove console_init_f where unnecessary Ashok Kumar Reddy (2): mx6qarm2:Use IMX_GPIO_NR macro mx5:Use IMX_GPIO_NR macro Benoît Thébaudeau (20): rtc: imxdi: Initial support mxc_spi: Round up clock divider mx25: Enable dcache mx5: Enable dcache mx35: Fix typo on EDIO mx3: Fix typo on IPU_CONF_CSI_EN mx5/6 timer: Round up tick_to_time() value mx5: cosmetic: Clean up lowlevel_init mx35: Remove duplicate GPIO3_BASE_ADDR mx5/6: Fix cpu_mmc_init() return value mx35: Add cpu_mmc_init() mx5: Undeclare imx_decode_pll() mx35 iomux: Remove unused macro mx35: Fix broken pin definitions mx35: Remove declaration of non-existing function mx35: Move clock enums to clock.h mx35: Remove declaration of non-existing function mxc: Make gpio_get_value() use PSR mxc: Define architecture identifier fsl_esdhc: Remove cache snooping for i.MX Bo Shen (8): arm : Atmel : add at91sam9x5ek board support ARM : at91sam9x5 : Remove CONFIG_ARCH_CPU_INIT arm : at91sam9x5 : fix a small bug for NAND Take over the maintainer for sam9g10 and sam9m10g45 atmel: at91sam9x5: fix name error for spi spi: atmel: add WDRBT bit to avoid receive overrun arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT atmel: at91sam9x5: add spi flash boot support Chandan Nath (3): am33xx: CPSW init and definitions am33xx: pin mux defintions for CPSW switch am335x_evm: CPSW support Cyril Chemparathy (1): cpsw: add driver for cpsw ethernet device Donghwa Lee (9): video: support exynos fimd driver for various exynos series EXYNOS5: support exynos5 lcd clock control EXYNOS5: support display system register control EXYNOS5: support display port phy control function EXYNOS5: add display port base address video: support exynos display port drivers video: add dp_enabled variable in vidinfo structure video: exynos fb driver supports display port feature video: support exynos pwm backlight driver Enric Balletbò i Serra (1): OMAP3: fix DRAM size for IGEP-based boards. Fabio Estevam (10): mx28evk: Turn on caches mx51evk: do not overwrite the console vision2: do not overwrite the console m28evk: Turn on caches apx4devkit: Turn on caches mx28evk: Remove unneeded 'undef' mxs: Use correct function name to initialize dram mx53loco: Use IMX_GPIO_NR macro mx51evk: Use IMX_GPIO_NR macro mx53ard: Use IMX_GPIO_NR macro Heiko Schocher (1): davinci: enbw_cmc: change switch init behaviour Igor Grinberg (1): arm: omap3: cm-t35: minor comment and printf change Ilya Yanok (3): omap24xx_i2c: add 2-byte address support am335x_evm: read the on-board EEPROM am335x_evm: enable SMSC PHY driver Jaehoon Chung (1): ARM: EXYNOS: fixed compiler warning message Javier Martinez Canillas (5): igep00x0: default to OMAP-specific serial driver igep00x0: default mmcrootfstype to EXT4 OMAP3: igep00x0: Add config option to choose flash storage memory OMAP3: mem: Add Numonyx OneNAND 200MHz timing information OMAP3: igep00x0: add SPL support for IGEP-based boards Jeroen Hofstee (1): arm: omap: Fix switching back to nandecc sw. John Rigby (1): u8500: Separating mmc config parameters from driver Lad, Prabhakar (7): da850/omap-l138: Add MMC support for DA850/OMAP-L138 arm, davinci: perform check for initializing global data and serial init da850/omap-l138: Define SPI specific configs for SPL only when SPI is used da850/omap-l138: Add support to read u-boot image from MMC/SD da850/omap-l138: Fix NAND flash timings da850/omap-l138: Add support for NAND SPL da850/omap-l138: add support for direct NOR boot mode Laurence Withers (4): DaVinci DA8xx: tidy up clock ID definition DaVinci DA850: UART2 clock ID comes from ASYNC3 DaVinci DA8xx: replace magic number for DDR speed DaVinci DA8xx: fix set_cpu_clk_info() Marek Vasut (18): dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP dm: Move OMAP GPIO driver to drivers/gpio/ MX28: SPI: Refactor spi_xfer a bit MX28: SPI: Pull out the PIO transfer function MX28: SPI: Add DMA transfer support MX28: Fix up the MMC driver DMA mode MX28: Split out the PIO and DMA transfer functions MX28: Transfer small blocks via PIO in MXS MMC MX28: Fix MXS MMC DMA issues MX28: Move the u-boot.bd info CPUDIR/SOCDIR MX28: Add SchulerControl SC_SPS_1 platform MX28: Drop the cp15 reconfiguration from SPL MX28: Shuffle around the power management code MX28: DMA: Align the struct mxs_dma_desc MX28: DMA: Prolong the DMA timeout MX28: SPI: Supercharge the SPI driver MX28: m28evk: Align SSP clock speed MX28: m28evk: Enable SPI DMA Markus Hubig (2): Enable the EMAC clock in at91_macb_hw_init(). at91: Add support for taskit AT91SAM9G20 boards. Mathieu J. Poirier (10): snowball: Add support for ux500 based snowball board u8500: Moving prcmu to cpu directory snowball: Adding architecture dependent initialisation snowball: Adding CPU clock initialisation snowball: Moving to ux500.v2 addess scheme for PRCMU access snowball: applying power to LAN and GBF controllers u8500: Moving processor-specific functions to cpu area. u8500: Enabling power to MMC device on AB8500 V2 armv7: Adding cpu specific cache managmenent snowball: Adding board specific cache cleanup routine Matt Sealey (9): spi: fix mxc_spi_slave structure allocation to clear memory spi: fix mxs_spi_slave structure allocation to clear memory mx5: add iomux-mx51.h include efikamx: move and rename Efika MX directories and config files to prepare for new boards efikamx: remove drive strength function and roll its functionality into the DCD efikamx: configure Smarttop PCBID and LED pads in DCD for convenience efikamx: update MAINTAINERS for Genesi Efika MX systems efikamx: update to Efika MX Smarttop and Smartbook boards efikamx: sync Smartbook DDR settings in DCD with those found in Genesi's production U-Boot Mikhail Kshevetskiy (3): arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138 arm/davinci/da850: add uart0 pinmux serial/ns16550: ns16550 has a different register layout on SOC_DA8XX Otavio Salvador (19): imx: Use a clear identification of an unidentified CPU type MX28: extend print_cpuinfo() to use chip information MX28: use a clear name for DDR2 initialization mxs: reorganize source directory for easy sharing of code in i.MXS SoCs mxs: prefix register acessor macros with 'mxs' prefix mxs: prefix register structs with 'mxs' prefix mxs: Reowork SPL to use 'mxs' prefix for methods mxs: Clarify why we poweroff in case of brownout in 5v conflict mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs sc_sps_1: Adjust board config to use 'mxs' SoC code mxs: Remove not required explicit iomux-mx28.h include mxs: Remove not required include of iomux-mx28.h mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h mxs: Convert sys_proto.h prefixes to 'mxs' MX28: config: Allow different target generation in elftosb call MX28: Move "regs-base.h" include after SoC type configuration mxs: Replace i.MX233 by i.MX23 on copyright header mxs: Only build internal Ethernet controller for i.MX28 mxs: Rename 'mx28_dram_init' to 'mxs_dram_init' Peter Meerwald (4): beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static beagle: fix termination of buddy env setting beagle: removed unused pr_debug #define beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3 Rajashekhara, Sudhakar (2): da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM da850/omap-l138: Make MMC and NOR support mutually exclusive Rajeshwari Shinde (10): ARCH: SPL: Add parametric board initializer SMDK5250: SPL: Define parametric board initializer SMDK5250: Add smdk5250-uboot-spl.lds EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Add BPLL support EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 Rob Herring (1): ARM: Remove unused stack and irq config defines Satyanarayana, Sandhya (1): am33xx evm: Update secure_emif_sdram_config during ddr init Stathis Voukelatos (1): i.MX28: bug fixes in PMU configuration code Stefano Babic (7): mcx: increased buffer for command line OMAP3: mcx: set pinmux for uart4 OMAP3: mcx: updated default environment OMAP3: mcx: read hot-water-button after reset MX5: mx53loco: do not overwrite the console MX: Set a common gpio.h for all i.MX MX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR Stephen Warren (4): README: fix references to config_cmd_default.h ARM: arm1176: enable instruction cache in arch_cpu_init() ARM: add basic support for the Broadcom BCM2835 SoC ARM: add Raspberry Pi model B board, using BCM2835 SoC Steve Sakoman (3): omap: am335x_evm: remove unused definitions omap: am33xx: enable gpio support omap: am335x_evm: enable i2c1 channel Sughosh Ganu (2): hawkboard/omapl-138: Add support for generating ais image for hawkboard da8xx/hawkboard: Add support for ohci host controller Tetsuyuki Kobayashi (1): arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 Tom Rini (33): am33xx: Enable gpio0 clock am335x_evm: Update config for common usage am33xx: Remove DMM_BASE define am33xx: Convert to using <asm/emif.h> to describe the EMIF am33xx: Remove extra check in enable_ddr_clocks am33xx: Bugfix to config_sdram() am33xx: Rework DDR2 EMIF initalization slightly am33xx: Make config_cmd_ctrl / config_ddr_data take const structs am33xx: Pass to config_ddr the type of memory that is connected am33xx: Move the call to ddr_pll_config, make it take the frequency am33xx: Clean up unused DDR defines, prefix more with 'DDR2' am33xx: Document what we're doing with ddrctrl->ddrckectrl am33xx: Turn a number of 'int' functions to 'void' am33xx: Use emif_regs struct for storing initialization values am33xx: Rework config_io_ctrl slightly am33xx: Do not touch 'ratio1' fields am33xx: Correct and clean up ddr_regs struct am33xx: Move some variables in emif4.c, mark them static. am33xx: Rework config_ddr to make DDR3 support easier. am33xx: Add DDR3 (Micron MT41J128M16JT-125) timings and support am33xx: Remove board/ti/am335x/evm.c am33xx: Add support for TI AM335x StarterKit EVM am33xx evm: Add CONFIG_CMD_EEPROM and related am33xx: Rework pinmux functions doc/git-mailrc: Update 'ti' alias am335x evm: Initial support for AM335x GP EVM Profiles am33xx: Correct MMC1, remove MMC2 support am335x evm: Enable MMC1 pinmux am33xx: Add support, update omap3 McSPI driver am335x evm: Enable support for spi0 omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack davinci, c6x: Always use C version of reset code Troy Kisky (4): iomux: move IOMUX_GPR13_xxx defines imx-common/cmd_bmode.c: add imx bmode (bootmode) command mx6qsabrelite: add boot_mode support mx53evk: add boot_mode support Vaibhav Bedia (1): am335x: ddr_defs: Update EMIF parameters Veli-Pekka Peltola (1): Add support for Bluegiga APX4 Development Kit Vikram Narayanan (1): tx25: Use generic gpio_* calls Wu, Josh (5): at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param(). at91: atmel_nand: remove unused variables. at91: atmel_nand: Update driver to support Programmable Multibit ECC controller at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC. at91: 9x5: Enable PMECC for 5series ek board. Xu, Hong (1): AT91: Small fix on AT91 USART initialization code Zhong Hongbo (1): arm/s5pxx: Fix get_timer_masked to get the time. fabio.estevam(a)freescale.com (1): mxs: Convert timeout parameter to 'unsigned int' trem (3): rtc: add support of mx27 rtc gpio: add gpio api support to mx27 (v4) imx27lite: update with gpio api change (v4) Łukasz Majewski (3): arm:trats: loaduimage environment variable defied for TRATS target arm:exynos: Enable data cache at exynos based processors. arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung board .gitignore | 3 + MAINTAINERS | 63 +- MAKEALL | 9 +- Makefile | 36 +- README | 4 +- arch/arm/cpu/arm1136/mx35/generic.c | 19 +- arch/arm/cpu/arm1136/mx35/iomux.c | 2 - arch/arm/cpu/arm1176/bcm2835/Makefile | 37 + arch/arm/cpu/arm1176/bcm2835/config.mk | 19 + arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S | 19 + arch/arm/cpu/arm1176/bcm2835/reset.c | 35 + arch/arm/cpu/arm1176/bcm2835/timer.c | 55 + arch/arm/cpu/arm1176/cpu.c | 7 + arch/arm/cpu/arm720t/cpu.c | 2 + arch/arm/cpu/arm720t/interrupts.c | 5 + arch/arm/cpu/arm720t/start.S | 25 +- arch/arm/cpu/arm720t/tegra20/Makefile | 48 + arch/arm/cpu/arm720t/tegra20/board.h | 25 + .../arm/cpu/arm720t/tegra20}/config.mk | 17 +- .../{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} | 148 +-- arch/arm/cpu/arm720t/tegra20/cpu.h | 100 ++ arch/arm/cpu/arm720t/tegra20/spl.c | 133 ++ arch/arm/cpu/arm926ejs/at91/Makefile | 1 + arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 4 + arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232 ++++ arch/arm/cpu/arm926ejs/at91/clock.c | 12 +- arch/arm/cpu/arm926ejs/davinci/Makefile | 4 +- arch/arm/cpu/arm926ejs/davinci/cpu.c | 22 +- arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 26 +- arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 16 + arch/arm/cpu/arm926ejs/davinci/psc.c | 5 + arch/arm/cpu/arm926ejs/davinci/reset.S | 81 -- arch/arm/cpu/arm926ejs/davinci/reset.c | 33 + arch/arm/cpu/arm926ejs/davinci/spl.c | 20 +- arch/arm/cpu/arm926ejs/mx25/generic.c | 8 + arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +- arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +- arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +- arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +- arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 108 +- .../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +- arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 27 +- .../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +- .../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 65 +- .../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 279 ++--- arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 42 - arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 10 +- .../arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 0 .../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +- arch/arm/cpu/armv7/Makefile | 6 +- arch/arm/cpu/armv7/am33xx/board.c | 212 +++- arch/arm/cpu/armv7/am33xx/clock.c | 47 +- arch/arm/cpu/armv7/am33xx/ddr.c | 90 +- arch/arm/cpu/armv7/am33xx/emif4.c | 240 ++-- arch/arm/cpu/armv7/config.mk | 2 - arch/arm/cpu/armv7/cpu.c | 13 +- arch/arm/cpu/armv7/exynos/clock.c | 139 ++- arch/arm/cpu/armv7/exynos/pinmux.c | 22 +- arch/arm/cpu/armv7/exynos/power.c | 21 + arch/arm/cpu/armv7/exynos/soc.c | 8 + arch/arm/cpu/armv7/exynos/system.c | 18 + arch/arm/cpu/armv7/imx-common/Makefile | 1 + arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 ++ arch/arm/cpu/armv7/imx-common/cpu.c | 10 +- arch/arm/cpu/armv7/imx-common/timer.c | 2 +- arch/arm/cpu/armv7/lowlevel_init.S | 51 + arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +- arch/arm/cpu/armv7/mx5/soc.c | 39 + arch/arm/cpu/armv7/mx6/soc.c | 36 + arch/arm/cpu/armv7/omap-common/Makefile | 3 - arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 18 - arch/arm/cpu/armv7/s5p-common/pwm.c | 2 +- arch/arm/cpu/armv7/s5p-common/timer.c | 20 +- arch/arm/cpu/armv7/start.S | 20 +- arch/arm/cpu/armv7/{tegra2 => tegra20}/Makefile | 15 +- .../cpu/armv7/{tegra2 => tegra20}/cmd_enterrcm.c | 4 +- arch/arm/cpu/armv7/{tegra2 => tegra20}/config.mk | 12 - arch/arm/cpu/armv7/{tegra2 => tegra20}/usb.c | 2 +- arch/arm/cpu/armv7/u8500/Makefile | 2 +- arch/arm/cpu/armv7/u8500/clock.c | 34 + arch/arm/cpu/armv7/u8500/cpu.c | 192 +++ .../arm/cpu/armv7}/u8500/prcmu.c | 128 +- arch/arm/cpu/tegra20-common/Makefile | 55 + arch/arm/cpu/tegra20-common/ap20.c | 131 ++ .../cpu/{armv7/tegra2 => tegra20-common}/board.c | 39 +- .../cpu/{armv7/tegra2 => tegra20-common}/clock.c | 10 +- .../cpu/{armv7/tegra2 => tegra20-common}/crypto.c | 0 .../cpu/{armv7/tegra2 => tegra20-common}/crypto.h | 0 .../arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c | 2 +- .../cpu/{armv7/tegra2 => tegra20-common}/funcmux.c | 2 +- .../tegra2 => tegra20-common}/lowlevel_init.S | 0 .../cpu/{armv7/tegra2 => tegra20-common}/pinmux.c | 4 +- .../arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c | 2 +- .../{armv7/tegra2 => tegra20-common}/sys_info.c | 2 +- .../cpu/{armv7/tegra2 => tegra20-common}/timer.c | 2 +- .../{armv7/tegra2 => tegra20-common}/warmboot.c | 18 +- .../tegra2 => tegra20-common}/warmboot_avp.c | 4 +- .../tegra2 => tegra20-common}/warmboot_avp.h | 0 arch/arm/include/asm/arch-am33xx/common_def.h | 23 - arch/arm/include/asm/arch-am33xx/cpu.h | 33 + arch/arm/include/asm/arch-am33xx/ddr_defs.h | 184 +-- arch/arm/include/asm/arch-am33xx/gpio.h | 29 + arch/arm/include/asm/arch-am33xx/hardware.h | 9 +- arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 +- arch/arm/include/asm/arch-am33xx/omap.h | 1 - arch/arm/include/asm/arch-am33xx/sys_proto.h | 30 + arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 + arch/arm/include/asm/arch-at91/at91sam9x5.h | 170 +++ arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 91 ++ arch/arm/include/asm/arch-at91/hardware.h | 2 + arch/arm/include/asm/arch-bcm2835/gpio.h | 66 + arch/arm/include/asm/arch-bcm2835/timer.h | 37 + arch/arm/include/asm/arch-bcm2835/wdog.h | 36 + .../arm/include/asm/arch-davinci/da8xx-usb.h | 7 +- arch/arm/include/asm/arch-davinci/hardware.h | 60 +- arch/arm/include/asm/arch-davinci/pinmux_defs.h | 4 + arch/arm/include/asm/arch-exynos/clk.h | 1 + arch/arm/include/asm/arch-exynos/clock.h | 237 ++-- arch/arm/include/asm/arch-exynos/cpu.h | 3 + arch/arm/include/asm/arch-exynos/dmc.h | 65 + arch/arm/include/asm/arch-exynos/dp.h | 751 ++++++++++++ arch/arm/include/asm/arch-exynos/dp_info.h | 214 ++++ arch/arm/include/asm/arch-exynos/fb.h | 27 +- arch/arm/include/asm/arch-exynos/gpio.h | 7 +- arch/arm/include/asm/arch-exynos/power.h | 5 + arch/arm/include/asm/arch-exynos/pwm_backlight.h | 34 + arch/arm/include/asm/arch-exynos/spl.h | 97 ++ arch/arm/include/asm/arch-imx/imx-regs.h | 3 + arch/arm/include/asm/arch-mx25/gpio.h | 17 +- arch/arm/include/asm/arch-mx25/imx-regs.h | 2 + arch/arm/include/asm/arch-mx27/gpio.h | 55 + arch/arm/include/asm/arch-mx27/imx-regs.h | 35 +- arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 + arch/arm/include/asm/arch-mx31/gpio.h | 7 +- arch/arm/include/asm/arch-mx31/imx-regs.h | 4 +- arch/arm/include/asm/arch-mx35/clock.h | 28 +- arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +- arch/arm/include/asm/arch-mx35/gpio.h | 12 +- arch/arm/include/asm/arch-mx35/imx-regs.h | 31 +- arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 - arch/arm/include/asm/arch-mx35/sys_proto.h | 1 - arch/arm/include/asm/arch-mx5/clock.h | 2 - arch/arm/include/asm/arch-mx5/gpio.h | 7 +- arch/arm/include/asm/arch-mx5/imx-regs.h | 20 + arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164 +++ arch/arm/include/asm/arch-mx6/gpio.h | 7 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 25 +- arch/arm/include/asm/arch-mx6/iomux.h | 129 ++ .../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0 arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 3 +- .../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0 .../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 2 +- .../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0 .../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0 .../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256 ++-- .../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0 .../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 +- .../regs-clkctrl-mx28.h} | 60 +- .../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +- .../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 +- .../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +- .../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +- .../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 +- .../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 +- .../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +- .../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170 +-- .../asm/{arch-mx28 => arch-mxs}/regs-power.h | 30 +- .../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +- .../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +- .../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +- .../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +- .../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +- .../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 28 +- arch/arm/include/asm/arch-omap3/mem.h | 29 + arch/arm/include/asm/arch-omap4/omap.h | 1 - arch/arm/include/asm/arch-omap5/omap.h | 2 - .../asm/{arch-tegra2 => arch-tegra20}/ap20.h | 4 +- .../asm/{arch-tegra2 => arch-tegra20}/apb_misc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/board.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/clk_rst.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/clock.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/emc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/flow.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/funcmux.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/fuse.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/gpio.h | 2 +- arch/arm/include/asm/arch-tegra20/hardware.h | 29 + .../asm/{arch-tegra2 => arch-tegra20}/mmc.h | 8 +- .../asm/{arch-tegra2 => arch-tegra20}/pinmux.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/pmc.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/pmu.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/scu.h | 0 .../{arch-tegra2 => arch-tegra20}/sdram_param.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/sys_proto.h | 4 +- .../tegra2.h => arch-tegra20/tegra20.h} | 18 +- .../asm/{arch-tegra2 => arch-tegra20}/tegra_i2c.h | 2 +- .../asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h | 4 +- .../asm/{arch-tegra2 => arch-tegra20}/timer.h | 6 +- .../uart-spi-switch.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/uart.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/usb.h | 0 .../asm/{arch-tegra2 => arch-tegra20}/warmboot.h | 0 arch/arm/include/asm/arch-u8500/clock.h | 5 +- arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 + arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 170 +++ arch/arm/include/asm/arch-u8500/hardware.h | 33 +- .../arm/include/asm/arch-u8500/prcmu.h | 35 +- arch/arm/include/asm/arch-u8500/sys_proto.h | 1 + arch/arm/include/asm/emif.h | 8 +- arch/arm/include/asm/imx-common/boot_mode.h | 36 + arch/arm/include/asm/imx-common/gpio.h | 39 + arch/arm/include/asm/imx-common/iomux-v3.h | 111 -- arch/arm/include/asm/omap_common.h | 2 +- arch/arm/lib/Makefile | 2 +- board/BuS/eb_cpux9k2/cpux9k2.c | 2 - board/BuS/vl_ma2sc/vl_ma2sc.c | 3 - board/CarMediaLab/flea3/flea3.c | 6 +- board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 - board/atmel/at91sam9263ek/at91sam9263ek.c | 3 - board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 - board/atmel/at91sam9rlek/at91sam9rlek.c | 3 - board/atmel/at91sam9x5ek/Makefile | 52 + board/atmel/at91sam9x5ek/at91sam9x5ek.c | 295 +++++ board/atmel/at91sam9x5ek/config.mk | 1 + board/avionic-design/common/tamonten.c | 4 +- .../dts/{tegra2-medcom.dts => tegra20-medcom.dts} | 0 .../dts/{tegra2-plutux.dts => tegra20-plutux.dts} | 0 .../dts/{tegra2-tec.dts => tegra20-tec.dts} | 0 board/avionic-design/medcom/Makefile | 2 - board/avionic-design/plutux/Makefile | 2 - board/avionic-design/tec/Makefile | 2 - board/bluegiga/apx4devkit/Makefile | 47 + board/bluegiga/apx4devkit/apx4devkit.c | 150 +++ board/bluegiga/apx4devkit/spl_boot.c | 164 +++ board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 - board/calao/tny_a9260/tny_a9260.c | 3 - board/cm_t35/cm_t35.c | 4 +- .../dts/{tegra2-paz00.dts => tegra20-paz00.dts} | 0 board/compal/paz00/Makefile | 2 - board/compal/paz00/paz00.c | 6 +- ...{tegra2-trimslice.dts => tegra20-trimslice.dts} | 0 board/compulab/trimslice/Makefile | 2 - board/compulab/trimslice/trimslice.c | 6 +- board/davinci/da8xxevm/da850evm.c | 54 +- board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 + board/davinci/da8xxevm/hawkboard.c | 41 + board/denx/m28evk/m28evk.c | 10 +- board/denx/m28evk/spl_boot.c | 2 +- board/efikamx/efikamx.c | 735 ----------- board/enbw/enbw_cmc/enbw_cmc.c | 102 +- board/esg/ima3-mx53/ima3-mx53.c | 2 +- board/eukrea/cpuat91/cpuat91.c | 2 - board/freescale/mx28evk/iomux.c | 2 +- board/freescale/mx28evk/mx28evk.c | 6 +- board/freescale/mx28evk/u-boot.bd | 14 - board/freescale/mx35pdk/mx35pdk.c | 2 +- board/freescale/mx51evk/mx51evk.c | 32 +- board/freescale/mx53ard/mx53ard.c | 14 +- board/freescale/mx53evk/mx53evk.c | 25 +- board/freescale/mx53loco/mx53loco.c | 26 +- board/freescale/mx53smd/mx53smd.c | 6 +- board/freescale/mx6qarm2/mx6qarm2.c | 8 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 47 +- board/{efikamx => genesi/mx51_efikamx}/Makefile | 0 .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +- board/genesi/mx51_efikamx/efikamx.c | 512 ++++++++ .../mx51_efikamx}/imximage_mx.cfg | 50 +- .../mx51_efikamx}/imximage_sb.cfg | 44 +- board/htkw/mcx/mcx.c | 23 + board/htkw/mcx/mcx.h | 11 +- board/isee/igep0020/igep0020.c | 42 +- board/isee/igep0020/igep0020.h | 4 + board/isee/igep0030/igep0030.c | 42 +- board/isee/igep0030/igep0030.h | 4 + board/karo/tx25/tx25.c | 25 +- board/logicpd/imx27lite/imx27lite.c | 5 +- board/nvidia/common/board.c | 17 +- board/nvidia/common/emc.c | 2 +- board/nvidia/common/uart-spi-switch.c | 2 +- .../{tegra2-harmony.dts => tegra20-harmony.dts} | 2 +- .../{tegra2-seaboard.dts => tegra20-seaboard.dts} | 0 .../{tegra2-ventana.dts => tegra20-ventana.dts} | 2 +- .../{tegra2-whistler.dts => tegra20-whistler.dts} | 2 +- board/nvidia/harmony/harmony.c | 6 +- board/nvidia/seaboard/seaboard.c | 6 +- board/nvidia/whistler/whistler.c | 6 +- board/raspberrypi/rpi_b/Makefile | 34 + board/raspberrypi/rpi_b/rpi_b.c | 34 + board/samsung/smdk5250/Makefile | 3 +- board/samsung/smdk5250/clock_init.c | 714 +++++++++-- board/samsung/smdk5250/clock_init.h | 149 +++ board/samsung/smdk5250/dmc_common.c | 199 +++ board/samsung/smdk5250/dmc_init.c | 462 ------- board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++ board/samsung/smdk5250/setup.h | 763 +++++++----- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 + board/samsung/smdk5250/smdk5250.c | 6 +- board/samsung/smdk5250/smdk5250_spl.c | 68 ++ .../config.mk => schulercontrol/sc_sps_1/Makefile} | 40 +- board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++ board/schulercontrol/sc_sps_1/spl_boot.c | 165 +++ board/st-ericsson/snowball/Makefile | 49 + board/st-ericsson/snowball/db8500_pins.h | 745 +++++++++++ board/st-ericsson/snowball/snowball.c | 348 ++++++ board/st-ericsson/u8500/Makefile | 2 +- board/st-ericsson/u8500/u8500_href.c | 100 +- board/syteco/zmx25/zmx25.c | 26 +- board/taskit/stamp9g20/Makefile | 53 + board/taskit/stamp9g20/led.c | 138 +++ board/taskit/stamp9g20/stamp9g20.c | 191 +++ board/ti/am335x/Makefile | 4 +- board/ti/am335x/evm.c | 44 - board/ti/am335x/mux.c | 163 ++- board/ti/beagle/beagle.c | 12 +- board/ttcontrol/vision2/vision2.c | 13 +- boards.cfg | 41 +- doc/README.atmel_pmecc | 44 + doc/README.m28 | 4 +- doc/README.mx28evk | 4 +- doc/git-mailrc | 7 +- drivers/dma/apbh_dma.c | 38 +- drivers/gpio/Makefile | 3 + drivers/gpio/bcm2835_gpio.c | 89 ++ drivers/gpio/db8500_gpio.c | 221 ++++ drivers/gpio/mxc_gpio.c | 10 +- drivers/gpio/mxs_gpio.c | 16 +- .../omap-common/gpio.c => drivers/gpio/omap_gpio.c | 0 drivers/gpio/tegra_gpio.c | 12 +- drivers/i2c/mxs_i2c.c | 14 +- drivers/i2c/omap24xx_i2c.c | 58 +- drivers/i2c/tegra_i2c.c | 12 +- drivers/input/Makefile | 2 +- drivers/mmc/Makefile | 4 + drivers/mmc/arm_pl180_mmci.c | 131 +- drivers/mmc/arm_pl180_mmci.h | 27 +- drivers/mmc/fsl_esdhc.c | 5 +- drivers/mmc/mxsmmc.c | 204 ++-- drivers/mmc/spl_mmc_load.c | 62 + drivers/mmc/tegra_mmc.c | 32 +- drivers/mmc/tegra_mmc.h | 12 +- drivers/mtd/nand/atmel_nand.c | 827 ++++++++++++- drivers/mtd/nand/atmel_nand_ecc.h | 113 ++ drivers/mtd/nand/mxs_nand.c | 18 +- drivers/mtd/nand/omap_gpmc.c | 1 + drivers/net/Makefile | 1 + drivers/net/cpsw.c | 991 +++++++++++++++ drivers/net/macb.c | 4 +- drivers/rtc/Makefile | 2 + drivers/rtc/imxdi.c | 244 ++++ drivers/rtc/mx27rtc.c | 83 ++ drivers/rtc/mxsrtc.c | 10 +- drivers/serial/atmel_usart.c | 11 +- drivers/serial/ns16550.c | 2 +- drivers/serial/serial_pl01x.c | 2 + drivers/spi/atmel_spi.c | 3 + drivers/spi/atmel_spi.h | 1 + drivers/spi/mxc_spi.c | 6 +- drivers/spi/mxs_spi.c | 244 +++- drivers/spi/omap3_spi.c | 16 + drivers/spi/omap3_spi.h | 5 + drivers/spi/tegra_spi.c | 10 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mxs.c | 26 +- drivers/usb/host/ohci-da8xx.c | 48 + drivers/usb/musb/da8xx.c | 3 +- drivers/video/Makefile | 2 + drivers/video/exynos_dp.c | 925 ++++++++++++++ drivers/video/exynos_dp_lowlevel.c | 1291 ++++++++++++++++++++ drivers/video/exynos_dp_lowlevel.h | 80 ++ drivers/video/exynos_fb.c | 5 +- drivers/video/exynos_fimd.c | 91 +- drivers/video/exynos_pwm_bl.c | 57 + include/configs/SX1.h | 13 - include/configs/VCMA9.h | 12 - include/configs/a320evb.h | 13 - include/configs/actux1.h | 6 - include/configs/actux2.h | 6 - include/configs/actux3.h | 7 - include/configs/actux4.h | 6 - include/configs/adp-ag101.h | 7 - include/configs/adp-ag101p.h | 7 - include/configs/adp-ag102.h | 7 - include/configs/afeb9260.h | 5 - include/configs/am335x_evm.h | 114 +- include/configs/am3517_crane.h | 8 - include/configs/am3517_evm.h | 8 - include/configs/apollon.h | 8 - include/configs/apx4devkit.h | 236 ++++ include/configs/at91rm9200ek.h | 3 - include/configs/at91sam9260ek.h | 7 - include/configs/at91sam9261ek.h | 9 - include/configs/at91sam9263ek.h | 7 +- include/configs/at91sam9m10g45ek.h | 8 - include/configs/at91sam9rlek.h | 5 - include/configs/at91sam9x5ek.h | 200 +++ include/configs/balloon3.h | 9 - include/configs/ca9x4_ct_vxp.h | 7 - include/configs/calimain.h | 1 - include/configs/cam_enc_4xx.h | 2 - include/configs/cm4008.h | 13 - include/configs/cm41xx.h | 13 - include/configs/cm_t35.h | 9 +- include/configs/colibri_pxa270.h | 11 - include/configs/cpu9260.h | 7 - include/configs/cpuat91.h | 10 - include/configs/da830evm.h | 2 - include/configs/da850evm.h | 94 +- include/configs/davinci_dm355evm.h | 2 - include/configs/davinci_dm355leopard.h | 2 - include/configs/davinci_dm365evm.h | 2 - include/configs/davinci_dm6467evm.h | 2 - include/configs/davinci_dvevm.h | 2 - include/configs/davinci_schmoogie.h | 2 - include/configs/davinci_sffsdr.h | 2 - include/configs/davinci_sonata.h | 2 - include/configs/devkit3250.h | 1 - include/configs/devkit8000.h | 7 +- include/configs/dig297.h | 13 +- include/configs/dvlhost.h | 7 - include/configs/ea20.h | 1 - include/configs/eb_cpux9k2.h | 2 - include/configs/edminiv2.h | 1 - include/configs/enbw_cmc.h | 1 - include/configs/ethernut5.h | 5 +- include/configs/flea3.h | 8 - include/configs/harmony.h | 14 +- include/configs/hawkboard.h | 16 +- include/configs/highbank.h | 11 - include/configs/igep00x0.h | 96 +- include/configs/ima3-mx53.h | 3 - include/configs/imx27lite-common.h | 6 +- include/configs/imx31_litekit.h | 7 - include/configs/imx31_phycore.h | 7 - include/configs/integratorap.h | 11 - include/configs/integratorcp.h | 11 - include/configs/jadecpu.h | 7 - include/configs/jornada.h | 7 - include/configs/km/km_arm.h | 1 - include/configs/lubbock.h | 12 - include/configs/m28evk.h | 16 +- include/configs/mcx.h | 140 ++- include/configs/medcom.h | 12 +- include/configs/meesc.h | 7 - include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 12 - include/configs/mx25pdk.h | 3 - include/configs/mx28evk.h | 13 +- include/configs/mx31ads.h | 7 - include/configs/mx31pdk.h | 7 - include/configs/mx35pdk.h | 8 - include/configs/{efikamx.h => mx51_efikamx.h} | 7 - include/configs/mx51evk.h | 9 +- include/configs/mx53ard.h | 3 - include/configs/mx53evk.h | 6 +- include/configs/mx53loco.h | 5 +- include/configs/mx53smd.h | 3 - include/configs/mx6qarm2.h | 1 - include/configs/mx6qsabrelite.h | 7 +- include/configs/nhk8815.h | 6 - include/configs/ns9750dev.h | 4 - include/configs/omap1510inn.h | 13 - include/configs/omap2420h4.h | 12 - include/configs/omap3_beagle.h | 12 +- include/configs/omap3_evm_common.h | 9 +- include/configs/omap3_logic.h | 10 +- include/configs/omap3_mvblx.h | 9 +- include/configs/omap3_overo.h | 10 +- include/configs/omap3_pandora.h | 9 +- include/configs/omap3_sdp3430.h | 8 - include/configs/omap3_zoom1.h | 8 - include/configs/omap3_zoom2.h | 9 +- include/configs/omap4_common.h | 21 +- include/configs/omap5912osk.h | 13 - include/configs/omap5_evm.h | 20 +- include/configs/omap730p2.h | 14 - include/configs/origen.h | 8 - include/configs/otc570.h | 7 - include/configs/palmld.h | 9 - include/configs/palmtc.h | 9 - include/configs/paz00.h | 12 +- include/configs/pdnb3.h | 11 - include/configs/plutux.h | 12 +- include/configs/pm9261.h | 7 - include/configs/pm9263.h | 7 - include/configs/pm9g45.h | 6 - include/configs/pxa255_idp.h | 13 - include/configs/qong.h | 6 - include/configs/rpi_b.h | 104 ++ include/configs/s5p_goni.h | 3 - include/configs/s5pc210_universal.h | 3 - include/configs/sbc35_a9g20.h | 6 - include/configs/sc_sps_1.h | 208 ++++ include/configs/scb9328.h | 8 - include/configs/seaboard.h | 20 +- include/configs/smdk2410.h | 13 - include/configs/smdk5250.h | 10 +- include/configs/smdk6400.h | 7 - include/configs/smdkc100.h | 7 - include/configs/smdkv310.h | 8 - include/configs/snapper9260.h | 2 - include/configs/snowball.h | 266 ++++ include/configs/spear-common.h | 8 - include/configs/stamp9g20.h | 266 ++++ include/configs/tam3517-common.h | 9 +- include/configs/tec.h | 12 +- ...{tegra2-common-post.h => tegra20-common-post.h} | 73 +- .../configs/{tegra2-common.h => tegra20-common.h} | 50 +- include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 7 - include/configs/top9000.h | 5 - include/configs/trats.h | 10 +- include/configs/tricorder.h | 4 - include/configs/trimslice.h | 14 +- include/configs/trizepsiv.h | 13 - include/configs/tt01.h | 3 - include/configs/tx25.h | 1 - include/configs/u8500_href.h | 10 - include/configs/vct.h | 1 - include/configs/ventana.h | 12 +- include/configs/versatile.h | 11 - include/configs/vision2.h | 7 +- include/configs/vl_ma2sc.h | 9 - include/configs/vpac270.h | 8 - include/configs/whistler.h | 14 +- include/configs/xaeniax.h | 15 - include/configs/zipitz2.h | 10 - include/configs/zmx25.h | 1 - include/cpsw.h | 51 + include/fdtdec.h | 12 +- include/fsl_esdhc.h | 1 - include/lcd.h | 1 + include/mmc.h | 2 + include/nand.h | 2 +- include/ns16550.h | 9 + include/serial.h | 2 +- mkconfig | 38 +- spl/Makefile | 10 + 539 files changed, 19426 insertions(+), 5730 deletions(-) create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644 arch/arm/cpu/arm720t/tegra20/Makefile create mode 100644 arch/arm/cpu/arm720t/tegra20/board.h rename {board/isee/igep0030 => arch/arm/cpu/arm720t/tegra20}/config.mk (66%) rename arch/arm/cpu/{armv7/tegra2/ap20.c => arm720t/tegra20/cpu.c} (63%) create mode 100644 arch/arm/cpu/arm720t/tegra20/cpu.h create mode 100644 arch/arm/cpu/arm720t/tegra20/spl.c create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c delete mode 100644 arch/arm/cpu/arm926ejs/davinci/reset.S create mode 100644 arch/arm/cpu/arm926ejs/davinci/reset.c rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%) rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (69%) rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (85%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (82%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (93%) rename board/denx/m28evk/u-boot.bd => arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd (100%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c create mode 100644 arch/arm/cpu/armv7/lowlevel_init.S rename arch/arm/cpu/armv7/{tegra2 => tegra20}/Makefile (69%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/cmd_enterrcm.c (94%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/config.mk (74%) rename arch/arm/cpu/armv7/{tegra2 => tegra20}/usb.c (99%) create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644 arch/arm/cpu/tegra20-common/Makefile create mode 100644 arch/arm/cpu/tegra20-common/ap20.c rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/board.c (79%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/clock.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.c (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/crypto.h (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/emc.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/funcmux.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/lowlevel_init.S (100%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pinmux.c (99%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/pmu.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/sys_info.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/timer.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot.c (95%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot_avp.c (98%) rename arch/arm/cpu/{armv7/tegra2 => tegra20-common}/warmboot_avp.h (100%) delete mode 100644 arch/arm/include/asm/arch-am33xx/common_def.h create mode 100644 arch/arm/include/asm/arch-am33xx/gpio.h create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h rename drivers/usb/musb/da8xx.h => arch/arm/include/asm/arch-davinci/da8xx-usb.h (96%) create mode 100644 arch/arm/include/asm/arch-exynos/dp.h create mode 100644 arch/arm/include/asm/arch-exynos/dp_info.h create mode 100644 arch/arm/include/asm/arch-exynos/pwm_backlight.h create mode 100644 arch/arm/include/asm/arch-exynos/spl.h create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (98%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (97%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%) rename arch/arm/include/asm/{arch-mx28/regs-clkctrl.h => arch-mxs/regs-clkctrl-mx28.h} (88%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h (77%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h (95%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h (94%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h (84%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h (96%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h (93%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-power.h (97%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h (91%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h (95%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-timrot.h (90%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (78%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/ap20.h (98%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/apb_misc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/board.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/clk_rst.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/clock.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/emc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/flow.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/funcmux.h (97%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/fuse.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gp_padctrl.h (98%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/gpio.h (99%) create mode 100644 arch/arm/include/asm/arch-tegra20/hardware.h rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/mmc.h (84%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pinmux.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmc.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/pmu.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/scu.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/sdram_param.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/sys_proto.h (93%) rename arch/arm/include/asm/{arch-tegra2/tegra2.h => arch-tegra20/tegra20.h} (87%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/tegra_i2c.h (99%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/tegra_spi.h (96%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/timer.h (92%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/uart-spi-switch.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/uart.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/usb.h (100%) rename arch/arm/include/asm/{arch-tegra2 => arch-tegra20}/warmboot.h (100%) create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h create mode 100644 arch/arm/include/asm/imx-common/gpio.h create mode 100644 board/atmel/at91sam9x5ek/Makefile create mode 100644 board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644 board/atmel/at91sam9x5ek/config.mk rename board/avionic-design/dts/{tegra2-medcom.dts => tegra20-medcom.dts} (100%) rename board/avionic-design/dts/{tegra2-plutux.dts => tegra20-plutux.dts} (100%) rename board/avionic-design/dts/{tegra2-tec.dts => tegra20-tec.dts} (100%) create mode 100644 board/bluegiga/apx4devkit/Makefile create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c create mode 100644 board/bluegiga/apx4devkit/spl_boot.c rename board/compal/dts/{tegra2-paz00.dts => tegra20-paz00.dts} (100%) rename board/compulab/dts/{tegra2-trimslice.dts => tegra20-trimslice.dts} (100%) create mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg delete mode 100644 board/efikamx/efikamx.c delete mode 100644 board/freescale/mx28evk/u-boot.bd rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%) rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%) create mode 100644 board/genesi/mx51_efikamx/efikamx.c rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%) rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (80%) rename board/nvidia/dts/{tegra2-harmony.dts => tegra20-harmony.dts} (92%) rename board/nvidia/dts/{tegra2-seaboard.dts => tegra20-seaboard.dts} (100%) rename board/nvidia/dts/{tegra2-ventana.dts => tegra20-ventana.dts} (92%) rename board/nvidia/dts/{tegra2-whistler.dts => tegra20-whistler.dts} (94%) create mode 100644 board/raspberrypi/rpi_b/Makefile create mode 100644 board/raspberrypi/rpi_b/rpi_b.c create mode 100644 board/samsung/smdk5250/clock_init.h create mode 100644 board/samsung/smdk5250/dmc_common.c delete mode 100644 board/samsung/smdk5250/dmc_init.c create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds create mode 100644 board/samsung/smdk5250/smdk5250_spl.c rename board/{isee/igep0020/config.mk => schulercontrol/sc_sps_1/Makefile} (57%) create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c create mode 100644 board/st-ericsson/snowball/Makefile create mode 100644 board/st-ericsson/snowball/db8500_pins.h create mode 100644 board/st-ericsson/snowball/snowball.c create mode 100644 board/taskit/stamp9g20/Makefile create mode 100644 board/taskit/stamp9g20/led.c create mode 100644 board/taskit/stamp9g20/stamp9g20.c delete mode 100644 board/ti/am335x/evm.c create mode 100644 doc/README.atmel_pmecc create mode 100644 drivers/gpio/bcm2835_gpio.c create mode 100644 drivers/gpio/db8500_gpio.c rename arch/arm/cpu/armv7/omap-common/gpio.c => drivers/gpio/omap_gpio.c (100%) create mode 100644 drivers/mmc/spl_mmc_load.c create mode 100644 drivers/net/cpsw.c create mode 100644 drivers/rtc/imxdi.c create mode 100644 drivers/rtc/mx27rtc.c create mode 100644 drivers/usb/host/ohci-da8xx.c create mode 100644 drivers/video/exynos_dp.c create mode 100644 drivers/video/exynos_dp_lowlevel.c create mode 100644 drivers/video/exynos_dp_lowlevel.h create mode 100644 drivers/video/exynos_pwm_bl.c create mode 100644 include/configs/apx4devkit.h create mode 100644 include/configs/at91sam9x5ek.h rename include/configs/{efikamx.h => mx51_efikamx.h} (96%) create mode 100644 include/configs/rpi_b.h create mode 100644 include/configs/sc_sps_1.h create mode 100644 include/configs/snowball.h create mode 100644 include/configs/stamp9g20.h rename include/configs/{tegra2-common-post.h => tegra20-common-post.h} (74%) rename include/configs/{tegra2-common.h => tegra20-common.h} (83%) create mode 100644 include/cpsw.h Amicalement, -- Albert.

2 1

[U-Boot] Add a new protocol
by EVS Hardware Dpt 01 Sep '12

01 Sep '12

Hi, I want to add a new network protocol to u-boot. However it seems that the most straightforward way to add a new protocol is to add it to NetLoop's supported protocols. Of course, I would create a .c/.h pair of files to manage the protocol and use CONFIG_XXX to ensure it doesn't add unnecessary code. My problem is that the protocol is used for internal testing procedures to make u-boot act as a command server allowing a host pc to read/write memory, use i2c, program various data into flash (Mac Address, ID's, ...) and so on. The protocol could be gpl'ed and documented, yet it still have limited use outside our test procedure. So what could be the best way to achieve that goal? Should I replicate the whole NetLoop functionalities adapted to my protocol and put it on a .c/.h pair of files (and still using CONFIG_XXX) and keep these files available on request, or must I add that protocol to the "official" list of supported protocols? The second option is not very valuable for the community I think, but the first solution seems to be a very nasty hack. What's your opinion ? Regards, Fred.

3 5