September 2012 - U-Boot

[U-Boot] [PATCH] eb_cpux9k2: add ram target configuration
by Jens Scharsig 04 Sep '12

04 Sep '12

* add ram target for EB+CPUx9k2 board (eb_cpux9k2_ram_config) Signed-off-by: Jens Scharsig <js_at_ng(a)scharsoft.de> --- boards.cfg | 3 ++- include/configs/eb_cpux9k2.h | 5 +++++ 2 files changed, 7 insertions(+), 1 deletions(-) diff --git a/boards.cfg b/boards.cfg index 3cf75c3..efca4fc 100644 --- a/boards.cfg +++ b/boards.cfg @@ -54,7 +54,8 @@ integratorcp_cm920t arm arm920t integrator armltd a320evb arm arm920t - faraday a320 at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT -eb_cpux9k2 arm arm920t - BuS at91 +eb_cpux9k2 arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2 +eb_cpux9k2_ram arm arm920t eb_cpux9k2 BuS at91 eb_cpux9k2:RAMBOOT cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT mx1ads arm arm920t - - imx diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index eb05e2a..d7b6b57 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -44,7 +44,12 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ +#ifndef CONFIG_RAMBOOT #define CONFIG_SYS_TEXT_BASE 0x00000000 +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x21f00000 +#endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -- 1.7.7

4 5

[U-Boot] Please pull u-boot-staging/trini@ti.com
by Tom Rini 04 Sep '12

04 Sep '12

Hello, The following changes since commit a9f1a4893364ddbb8b7942cded91d4c17c4f5948: lsxl: support power switch (2012-09-03 17:48:51 +0530) are available in the git repository at: git://git.denx.de/u-boot-staging trini(a)ti.com for you to fetch changes up to e62b008fe341030f4a80a09b66952bba65027b70: integrator: break out common config (2012-09-04 08:51:13 -0700) ---------------------------------------------------------------- Linus Walleij (1): integrator: break out common config include/configs/integrator-common.h | 103 +++++++++++++++++++++++++++++++ include/configs/integratorap.h | 49 +-------------- include/configs/integratorcp.h | 115 ++--------------------------------- 3 files changed, 111 insertions(+), 156 deletions(-) create mode 100644 include/configs/integrator-common.h A build of all of the integrator boards is fine still. -- Tom

2 1

[U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
by York Sun 04 Sep '12

04 Sep '12

Before proper environment is setup, we extract hwconfig and put it into a buffer with size HWCONFIG_BUFFER_SIZE. We need to enlarge the buffer to accommodate longer string. Since this macro is used in multiple files, we move it into hwconfig.h. Signed-off-by: York Sun <yorksun(a)freescale.com> --- arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 -- arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 2 -- arch/powerpc/cpu/mpc8xxx/ddr/options.c | 1 - include/hwconfig.h | 2 ++ 4 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index c13c45f..2397547 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -56,8 +56,6 @@ #include "../../../../drivers/block/fsl_sata.h" -#define HWCONFIG_BUFFER_SIZE 128 - DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SECURE_BOOT diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 9300e7f..69399aa 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -46,8 +46,6 @@ static u32 serdes_prtcl_map; -#define HWCONFIG_BUFFER_SIZE 128 - #ifdef DEBUG static const char *serdes_prtcl_str[] = { [NONE] = "NA", diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 00ec57b..24c8a51 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -19,7 +19,6 @@ * This is pretty fragile on both the use of stack and if the buffer is big * enough. However we will get a warning from getenv_f for the later. */ -#define HWCONFIG_BUFFER_SIZE 128 /* Board-specific functions defined in each board's ddr.c */ extern void fsl_ddr_board_options(memctl_options_t *popts, diff --git a/include/hwconfig.h b/include/hwconfig.h index a037ed8..64861c4 100644 --- a/include/hwconfig.h +++ b/include/hwconfig.h @@ -18,6 +18,8 @@ #include <linux/types.h> #include <asm/errno.h> +#define HWCONFIG_BUFFER_SIZE 256 + #ifdef CONFIG_HWCONFIG extern int hwconfig_f(const char *opt, char *buf); -- 1.7.0.4

3 4

[U-Boot] ARM Workflow: rebase on ARM repositories
by Stefano Babic 04 Sep '12

04 Sep '12

Hi all ARM Custodians, I was thinking about the way we are usual to manage our trees. This comes because I know about issues from users who set their development on ARM-repositories. One of them uses u-boot-imx for his development, and of course after I rebased my tree he got into trouble, due to using a commit that does not exist anymore. Nevertheless there are boards, where the official documentation explain how to set patches on bases of u-boot-arm. For example, http://www.ti.com/tool/tmdsevm3530 Detlev discovers that the official documentation refers directly to commit cf6ec699a6dc21a538b039a0392cd38132072090 in u-boot-arm. After a rebase this commit does not exist anymore. Of course, we can really say that setting a development on a ARM repository instead of main repository is not the best ;-). But we know that sometimes setting on a partial repository is the best because some patches that are strictly required are already merged. And I do not know if we can say that our trees are "private" or "development" only: they are published, and available for everybody. Albert has described the way we are currently using in http://www.denx.de/wiki/view/U-Boot/CustodianGitTrees. I think you konow very well and it is the way we follow, and we usually rebase our tree after u-boot-arm is merged by Wolgang in mainline. I want to discuss here if we really need it and if this is the correct way to do. In Linux, every maintainer makes a "git pull" from Linus' tree. Nobody rebases, and I had never had the problem that my tree diverges when I update my kernel's trees from a mainatiner tree. However, this happens continuosly for the users of u-boot-imx. The way we are following can be seen in the linux-next trees, not in the main trees. The worst thing I think is that we lose the history of our tree, and the behavior can be different. Rebased patches can be different, and testing done until the rebase can be worthless and should be (theoretically) done again. Testers can say they have successfully test a patch, but it was on a pre-rebased tree. A tested-by in a rebased tree can be worthless. My big question is if we should not to come back using "git pull" to downstream mainline from Wolfgang's tree, instead of continuos rebase. I know that we switched to rebase to avoid a lot of "git merge commits", but maybe this is not so bad as rebasing. What is your opinion ? Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic(a)denx.de =====================================================================

5 10

[U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
by Zhong Hongbo 04 Sep '12

04 Sep '12

From: Zhong Hongbo <bocui107(a)gmail.com> all the patitions should depend CONFIG_PARTITIONS, no the CONFIG_CMD_$(device). The device symbol may be SATA, SCSI, USB, MMC, SYSTEMACE. Or else when the filesystem command be enabled, But board's configure file can not include any CONFIG_CMD_$(device), The u-boot will fail build. For example: CONFIG_CMD_EXT2 is defined in smdk6400.h, but the boards can not define any disk device. The error information of build as following: common/cmd_ext2.c:191: undefined reference to `get_partition_info' fs/ext2/libext2fs.o: In function `ext2fs_set_blk_dev': fs/ext2/dev.c:44: undefined reference to `get_partition_info' Signed-off-by: Zhong Hongbo <bocui107(a)gmail.com> --- Change for V2: - Add Signed-off-by. --- disk/part.c | 21 +++------------------ disk/part_amiga.c | 6 +----- disk/part_dos.c | 7 +------ disk/part_efi.c | 7 +------ disk/part_iso.c | 7 +------ disk/part_mac.c | 7 +------ 6 files changed, 8 insertions(+), 47 deletions(-) diff --git a/disk/part.c b/disk/part.c index 76f3939..d296a55 100644 --- a/disk/part.c +++ b/disk/part.c @@ -34,12 +34,7 @@ #define PRINTF(fmt,args...) #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) +#ifdef CONFIG_PARTITIONS struct block_drvr { char *name; @@ -103,12 +98,7 @@ block_dev_desc_t *get_dev(char* ifname, int dev) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) +#ifdef CONFIG_PARTITIONS /* ------------------------------------------------------------------------- */ /* @@ -238,12 +228,7 @@ void dev_print (block_dev_desc_t *dev_desc) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) +#ifdef CONFIG_PARTITIONS #if defined(CONFIG_MAC_PARTITION) || \ defined(CONFIG_DOS_PARTITION) || \ diff --git a/disk/part_amiga.c b/disk/part_amiga.c index dc7d462..5df55c8 100644 --- a/disk/part_amiga.c +++ b/disk/part_amiga.c @@ -26,11 +26,7 @@ #include <ide.h> #include "part_amiga.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef CONFIG_PARTITIONS #undef AMIGA_DEBUG diff --git a/disk/part_dos.c b/disk/part_dos.c index a43dd9c..b49ebe2 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -35,12 +35,7 @@ #include <ide.h> #include "part_dos.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef CONFIG_PARTITIONS /* Convert char[4] in little endian format to the host format integer */ diff --git a/disk/part_efi.c b/disk/part_efi.c index 02927a0..22dc0ea 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -37,12 +37,7 @@ #include "part_efi.h" #include <linux/ctype.h> -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef CONFIG_PARTITIONS /* Convert char[2] in little endian format to the host format integer */ diff --git a/disk/part_iso.c b/disk/part_iso.c index 4401790..f929563 100644 --- a/disk/part_iso.c +++ b/disk/part_iso.c @@ -25,12 +25,7 @@ #include <command.h> #include "part_iso.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef CONFIG_PARTITIONS /* #define ISO_PART_DEBUG */ diff --git a/disk/part_mac.c b/disk/part_mac.c index c1afc8c..c3b2aa3 100644 --- a/disk/part_mac.c +++ b/disk/part_mac.c @@ -34,12 +34,7 @@ #include <ide.h> #include "part_mac.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef CONFIG_PARTITIONS /* stdlib.h causes some compatibility problems; should fixe these! -- wd */ #ifndef __ldiv_t_defined -- 1.7.5.4

2 4

[U-Boot] [PATCH] mmc: Add a quirk to add delay during completion of sdhci_send_cmd
by Tushar Behera 04 Sep '12

04 Sep '12

MMC host controller requires a delay between every sdhci_send_cmd() execution. In s5p_mmc driver (s5p_sdhci replaces this driver), a delay of 1000us was provided after every mmc_send_cmd() call. Adding a quirk in current sdhci driver to replicate the behaviour. Without this delay, MMC initialization on Origen board fails with following error messages. Timeout for status update! mmc fail to send stop cmd CC: Jaehoon Chung <jh80.chung(a)samsung.com> CC: Andy Fleming <afleming(a)freescale.com> Signed-off-by: Tushar Behera <tushar.behera(a)linaro.org> --- This patch is applied on v2012.07 and Jaehoon Chung's following patchset. [PATCH v2 0/4] mmc: sdhci: fixed some problems for Exynos drivers/mmc/s5p_sdhci.c | 3 ++- drivers/mmc/sdhci.c | 4 ++++ include/sdhci.h | 1 + 3 files changed, 7 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index b978236..dc49d37 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -83,7 +83,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | - SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR; + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_WAIT_SEND_CMD; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->version = sdhci_readw(host, SDHCI_HOST_VERSION); diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index d0b8d24..823b1af 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -233,12 +233,16 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, if (!ret && data) ret = sdhci_transfer_data(host, data, start_addr); + if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD) + udelay(1000); + stat = sdhci_readl(host, SDHCI_INT_STATUS); sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS); if (!ret) { if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !is_aligned && (data->flags == MMC_DATA_READ)) memcpy(data->dest, aligned_buffer, trans_bytes); + return 0; } diff --git a/include/sdhci.h b/include/sdhci.h index 4351a62..d38cfd4 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -219,6 +219,7 @@ #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) +#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 5) /* to make gcc happy */ struct sdhci_host; -- 1.7.4.1

1 1

[U-Boot] [PATCH 1/2] efikamx: refine USB support
by Matt Sealey 04 Sep '12

04 Sep '12

Because of the way USB pad settings are handled it doesn't make sense to be able to build the Efika MX board support without CONFIG_CMD_USB turned on. So, we change the build to always compile in USB support. We do not need to check for CONFIG_CMD_USB like we do with CONFIG_MXC_SPI since the USB subsystem will error out of the compile for us. Additionally, the following behaviors have changed; * Smartbook "preboot" should not set input and output to USB keyboard as there is no display support * board_eth_init is implemented such that it does not cause U-Boot to report an explicit failure ("CPU Net Initialization Failed"). Since Ethernet is implemented via USB (fixed on Smarttop, pluggable on Smartbook, and handled by "usb start") - the warning that is left ("No ethernet found") is perfectly reasonable at the point it is printed since the USB system hasn't been started and nothing has been probed yet. Signed-off-by: Matt Sealey <matt(a)genesi-usa.com> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Marek Vasut <marex(a)denx.de> --- board/genesi/mx51_efikamx/Makefile | 6 +----- board/genesi/mx51_efikamx/efikamx-usb.c | 12 ++++++++++++ board/genesi/mx51_efikamx/efikamx.c | 3 --- 3 files changed, 13 insertions(+), 8 deletions(-) diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile index bd2174f..f95356f 100644 --- a/board/genesi/mx51_efikamx/Makefile +++ b/board/genesi/mx51_efikamx/Makefile @@ -27,11 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := efikamx.o - -ifdef CONFIG_CMD_USB -COBJS += efikamx-usb.o -endif +COBJS := efikamx.o efikamx-usb.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c index abd358a..ae6d1be 100644 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ b/board/genesi/mx51_efikamx/efikamx-usb.c @@ -201,3 +201,15 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) IMX_GPIO_NR(2, 20)); } } + +/* + * Ethernet on the Smarttop is on the USB bus. Rather than give an error about + * "CPU Net Initialization Failed", just pass this test since no other settings + * are required. Smartbook doesn't have built-in Ethernet but we will let it + * pass anyway considering someone may have plugged in a USB stick and all + * they need to do is run "usb start". + */ +int board_eth_init(bd_t *bis) +{ + return 0; +} diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index b9064fb..d9c499d 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -484,9 +484,6 @@ int board_late_init(void) imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads, ARRAY_SIZE(efikamx_pata_pads)); efikamx_usb_setup_pads(); - if (machine_is_efikasb()) - setenv("preboot", "usb reset ; setenv stdin usbkbd\0"); - return 0; } -- 1.7.9.5

2 3

[U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
by Fabio Estevam 04 Sep '12

04 Sep '12

Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params missed to update mx28evk, which caused the board not to boot. Apply the conversion so that the board can boot again. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- board/freescale/mx28evk/iomux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ ADDR_PINS << 8 | APREBIT) -void mx28_adjust_memory_params(uint32_t *dram_vals) +void mxs_adjust_memory_params(uint32_t *dram_vals) { dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; } -- 1.7.9.5

5 6

[U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
by Otavio Salvador 04 Sep '12

04 Sep '12

Align the SSP clock speed with oscilator to achieve higher transfer stability. Signed-off-by: Otavio Salvador <otavio(a)ossystems.com.br> --- Changes in v2: - reword commit log to match the change description done on m28evk. board/freescale/mx28evk/mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -49,8 +49,8 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); - /* SSP2 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + /* SSP2 clock at 160MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); -- 1.7.10.4

4 6

[U-Boot] [PATCH] SCSPS1: Enable caches
by Marek Vasut 04 Sep '12

04 Sep '12

Enable caches, make it faster! Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Stefano Babic <sbabic(a)denx.de> Cc: Detlev Zundel <dzu(a)denx.de> --- include/configs/sc_sps_1.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index 0ebdfb8..f5dc393 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -39,8 +39,6 @@ #include <asm/arch/regs-base.h> #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_CPU_INIT #define CONFIG_ARCH_MISC_INIT -- 1.7.10.4

2 1