September 2012 - U-Boot

[U-Boot] [PATCH 0/2] net: Netconsole port configuration and filtering
by Joe Hershberger 18 Sep '12

18 Sep '12

This series depends on this patch: http://patchwork.ozlabs.org/patch/174282/ Joe Hershberger (2): net: Allow netconsole settings to change after nc_start net: Filter incoming netconsole packets by IP drivers/net/netconsole.c | 104 ++++++++++++++++++++++++++++++++--------------- include/net.h | 3 +- net/net.c | 1 + 3 files changed, 74 insertions(+), 34 deletions(-) -- 1.7.11.5

3 7

[U-Boot] [PATCH] P4080/esdhc: make the P4080 ESDHC13 errata workaround conditional
by Roy Zang 18 Sep '12

18 Sep '12

P4080 Rev3.0 fixes ESDHC13 errata, so update the code to make the workaround conditional. In formal release document, the errata number should be ESDHC13 instead of ESDHC136. Signed-off-by: Roy Zang <tie-fei.zang(a)freescale.com> --- for sdk1.3. fix defect ENGR180745 arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 +++-- arch/powerpc/cpu/mpc85xx/cpu_init.c | 10 ++++++---- arch/powerpc/include/asm/config_mpc85xx.h | 2 +- 3 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 38e23c8..acc3b83 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -79,8 +79,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) puts("Work-around for Erratum ESDHC135 enabled\n"); #endif -#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) - puts("Work-around for Erratum ESDHC136 enabled\n"); +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13) + if (SVR_MAJ(svr) < 3) + puts("Work-around for Erratum ESDHC13 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) puts("Work-around for Erratum ESDHC-A001 enabled\n"); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 2397547..fe4b39e 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -495,11 +495,13 @@ skip_l2: setup_mp(); #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 { - void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; - setbits_be32(p, 1 << (31 - 14)); + if (SVR_MAJ(svr) < 3) { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } } #endif diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index fab01d5..ddd6557 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -387,7 +387,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC13 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 -- 1.7.8.1

1 0

[U-Boot] [PATCH 1/3] dm: sparc: net: Fixup greth compile warnings
by Marek Vasut 18 Sep '12

18 Sep '12

greth.c: In function ‘greth_recv’: greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat] greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat] greth.c:541:6: warning: pointer targets in assignment differ in signedness [-Wpointer-sign] greth.c: In function ‘greth_initialize’: greth.c:623:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat] greth.c:655:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat] greth.c:684:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat] Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Joe Hershberger <joe.hershberger(a)gmail.com> Cc: Daniel Hellstrom <daniel(a)gaisler.com> Cc: u-boot-dm(a)lists.denx.de --- drivers/net/greth.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 08206c8..3103a74 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -483,7 +483,7 @@ int greth_recv(struct eth_device *dev) greth_regs *regs = greth->regs; greth_bd *rxbd; unsigned int status, len = 0, bad; - unsigned char *d; + char *d; int enable = 0; int i; @@ -504,7 +504,7 @@ int greth_recv(struct eth_device *dev) goto done; } - debug("greth_recv: packet 0x%lx, 0x%lx, len: %d\n", + debug("greth_recv: packet 0x%x, 0x%x, len: %d\n", (unsigned int)rxbd, status, status & GRETH_BD_LEN); /* Check status for errors. @@ -620,7 +620,7 @@ int greth_initialize(bd_t * bis) greth->regs = (greth_regs *) apbdev.address; greth->irq = apbdev.irq; - debug("Found GRETH at 0x%lx, irq %d\n", greth->regs, greth->irq); + debug("Found GRETH at %p, irq %d\n", greth->regs, greth->irq); dev->priv = (void *)greth; dev->iobase = (unsigned int)greth->regs; dev->init = greth_init; @@ -652,7 +652,7 @@ int greth_initialize(bd_t * bis) /* initiate PHY, select speed/duplex depending on connected PHY */ if (greth_init_phy(greth, bis)) { /* Failed to init PHY (timedout) */ - debug("GRETH[0x%08x]: Failed to init PHY\n", greth->regs); + debug("GRETH[%p]: Failed to init PHY\n", greth->regs); return -1; } @@ -681,6 +681,6 @@ int greth_initialize(bd_t * bis) /* set and remember MAC address */ greth_set_hwaddr(greth, addr); - debug("GRETH[0x%08x]: Initialized successfully\n", greth->regs); + debug("GRETH[%p]: Initialized successfully\n", greth->regs); return 0; } -- 1.7.10.4

2 7

[U-Boot] [PATCH 1/3] nand: Add support for unlock.invert
by Joe Hershberger 18 Sep '12

18 Sep '12

NAND unlock command allows an invert bit to be set to unlock all but the selected page range. Signed-off-by: Joe Hershberger <joe.hershberger(a)ni.com> --- common/cmd_nand.c | 13 ++++++++++--- drivers/mtd/nand/nand_util.c | 9 ++++++--- include/nand.h | 4 ++-- 3 files changed, 18 insertions(+), 8 deletions(-) diff --git a/common/cmd_nand.c b/common/cmd_nand.c index a91ccf4..9acac9f 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -749,11 +749,18 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } - if (strcmp(cmd, "unlock") == 0) { + if (strncmp(cmd, "unlock", 5) == 0) { + int invert = 0; + + s = strchr(cmd, '.'); + + if (s && !strcmp(s, ".invert")) + invert = 1; + if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0) return 1; - if (!nand_unlock(&nand_info[dev], off, size)) { + if (!nand_unlock(&nand_info[dev], off, size, invert)) { puts("NAND flash successfully unlocked\n"); } else { puts("Error unlocking NAND flash, " @@ -807,7 +814,7 @@ U_BOOT_CMD( "\n" "nand lock [tight] [status]\n" " bring nand to lock state or display locked pages\n" - "nand unlock [offset] [size] - unlock section" + "nand unlock[.invert] [offset] [size] - unlock section" #endif #ifdef CONFIG_ENV_OFFSET_OOB "\n" diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 7ed8b18..87caa62 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -317,18 +317,19 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) * @param start start byte address * @param length number of bytes to unlock (must be a multiple of * page size nand->writesize) + * @param invert if set, unlock everything not selected * * @return 0 on success, -1 in case of error */ -int nand_unlock(struct mtd_info *mtd, ulong start, ulong length) +int nand_unlock(struct mtd_info *mtd, ulong start, ulong length, int invert) { int ret = 0; int chipnr; int status; int page; struct nand_chip *chip = mtd->priv; - printf ("nand_unlock: start: %08x, length: %d!\n", - (int)start, (int)length); + printf("nand_unlock%s: start: %08x, length: %d!\n", + invert ? " (invert)" : "", (int)start, (int)length); /* select the NAND device */ chipnr = (int)(start >> chip->chip_shift); @@ -368,6 +369,8 @@ int nand_unlock(struct mtd_info *mtd, ulong start, ulong length) /* submit ADDRESS of LAST page to unlock */ page += (int)(length >> chip->page_shift); + if (invert) + page |= 1; chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask); /* call wait ready function */ diff --git a/include/nand.h b/include/nand.h index a48b1b8..2c2f588 100644 --- a/include/nand.h +++ b/include/nand.h @@ -144,8 +144,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); #define NAND_LOCK_STATUS_LOCK 0x02 #define NAND_LOCK_STATUS_UNLOCK 0x04 -int nand_lock( nand_info_t *meminfo, int tight ); -int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); +int nand_lock(nand_info_t *meminfo, int tight); +int nand_unlock(nand_info_t *meminfo, ulong start, ulong length, int invert); int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst); -- 1.7.11.5

3 16

[U-Boot] [PATCH 1/2] ARM: Remove apollon board
by Marek Vasut 18 Sep '12

18 Sep '12

This board is the only board that still sticks to OneNAND IPL. Remove this board, since we have SPL around for a while and OneNAND is well supported in the SPL framework. The board can be revived if necessary. Signed-off-by: Marek Vasut <marex(a)denx.de> Cc: Albert Aribaud <albert.u.boot(a)aribaud.net> Cc: Minkyu Kang <promsoft(a)gmail.com> Cc: Tom Rini <trini(a)ti.com> --- MAINTAINERS | 4 - arch/arm/include/asm/arch-omap24xx/omap2420.h | 10 - board/apollon/Makefile | 43 --- board/apollon/apollon.c | 470 ------------------------- board/apollon/config.mk | 25 -- board/apollon/lowlevel_init.S | 337 ------------------ board/apollon/mem.c | 237 ------------- board/apollon/mem.h | 170 --------- board/apollon/sys_info.c | 396 --------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/apollon.h | 261 -------------- onenand_ipl/board/apollon/Makefile | 87 ----- onenand_ipl/board/apollon/apollon.c | 70 ---- onenand_ipl/board/apollon/config.mk | 14 - onenand_ipl/board/apollon/low_levelinit.S | 205 ----------- onenand_ipl/board/apollon/u-boot.onenand.lds | 53 --- 17 files changed, 1 insertion(+), 2383 deletions(-) delete mode 100644 board/apollon/Makefile delete mode 100644 board/apollon/apollon.c delete mode 100644 board/apollon/config.mk delete mode 100644 board/apollon/lowlevel_init.S delete mode 100644 board/apollon/mem.c delete mode 100644 board/apollon/mem.h delete mode 100644 board/apollon/sys_info.c delete mode 100644 include/configs/apollon.h delete mode 100644 onenand_ipl/board/apollon/Makefile delete mode 100644 onenand_ipl/board/apollon/apollon.c delete mode 100644 onenand_ipl/board/apollon/config.mk delete mode 100644 onenand_ipl/board/apollon/low_levelinit.S delete mode 100644 onenand_ipl/board/apollon/u-boot.onenand.lds diff --git a/MAINTAINERS b/MAINTAINERS index 4aabcff..f1087bf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -777,10 +777,6 @@ Nagendra T S <nagendra(a)mistralsolutions.com> am3517_crane ARM ARMV7 (AM35x SoC) -Kyungmin Park <kyungmin.park(a)samsung.com> - - apollon ARM1136EJS - Sandeep Paulraj <s-paulraj(a)ti.com> davinci_dm355evm ARM926EJS diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h index 6032419..d8d5647 100644 --- a/arch/arm/include/asm/arch-omap24xx/omap2420.h +++ b/arch/arm/include/asm/arch-omap24xx/omap2420.h @@ -228,16 +228,6 @@ #define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) #endif /* endif CONFIG_2420H4 */ -#if defined(CONFIG_APOLLON) -#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ -#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ -#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ -#define APOLLON_CS3_BASE 0x18000000 /* NOR */ - -#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) -#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) -#endif /* endif CONFIG_APOLLON */ - /* Common */ #define LOW_LEVEL_SRAM_STACK 0x4020FFFC diff --git a/board/apollon/Makefile b/board/apollon/Makefile deleted file mode 100644 index 1bf1a32..0000000 --- a/board/apollon/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y := apollon.o mem.o sys_info.o -SOBJS := lowlevel_init.o - -COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c deleted file mode 100644 index 76626f0..0000000 --- a/board/apollon/apollon.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics. - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Derived from omap2420 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <netdev.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> -#include <asm/arch/mem.h> -#include <asm/mach-types.h> - -void wait_for_command_complete(unsigned int wd_base); - -DECLARE_GLOBAL_DATA_PTR; - -#define write_config_reg(reg, value) \ -do { \ - writeb(value, reg); \ -} while (0) - -#define mask_config_reg(reg, mask) \ -do { \ - char value = readb(reg) & ~(mask); \ - writeb(value, reg); \ -} while (0) - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRM, finish GPMC */ - - gd->bd->bi_arch_number = 919; - /* adress of boot parameters */ - gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100); - - return 0; -} - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called path is with sram stack. - **********************************************************/ -void s_init(void) -{ - watchdog_init(); - set_muxconf_regs(); - delay(100); - - peripheral_enable(); - icache_enable(); -} - -/******************************************************* - * Routine: misc_init_r - * Description: Init ethernet (done here so udelay works) - ********************************************************/ -int misc_init_r(void) -{ - return (0); -} - -/**************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************/ -void watchdog_init(void) -{ - /* There are 4 watch dogs. 1 secure, and 3 general purpose. - * The ROM takes care of the secure one. Of the 3 GP ones, - * 1 can reset us directly, the other 2 only generate MPU interrupts. - */ - __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); - wait_for_command_complete(WD2_BASE); - __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); - -#define MPU_WD_CLOCKED 1 -#if MPU_WD_CLOCKED - /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */ - __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR); - wait_for_command_complete(WD3_BASE); - __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR); - - __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR); - wait_for_command_complete(WD4_BASE); - __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR); -#endif -} - -/****************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - ******************************************************/ -void wait_for_command_complete(unsigned int wd_base) -{ - int pending = 1; - do { - pending = __raw_readl(wd_base + WWPS); - } while (pending); -} - -/******************************************************************* - * Routine:board_eth_init - * Description: take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - ******************************************************************/ -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - int cnt = 20; - - __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */ - - __raw_writew(0x0, LAN_RESET_REGISTER); - do { - __raw_writew(0x1, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto eth_reset_err_out; - --cnt; - } while (__raw_readw(LAN_RESET_REGISTER) != 0x1); - - cnt = 20; - - do { - __raw_writew(0x0, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto eth_reset_err_out; - --cnt; - } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000); - udelay(1000); - - mask_config_reg(ETH_CONTROL_REG, 0x01); - udelay(1000); - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -eth_reset_err_out: -#endif - return rc; -} - -/********************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - **********************************************/ -int dram_init(void) -{ - unsigned int size; - u32 mtype, btype; -#define NOT_EARLY 0 - - btype = get_board_type(); - mtype = get_mem_type(); - - display_board_info(btype); - - if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) { - /* init other chip select */ - do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); - } - - size = get_sdr_cs_size(SDRC_CS0_OSET); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size; -#if CONFIG_NR_DRAM_BANKS > 1 - size = get_sdr_cs_size(SDRC_CS1_OSET); - - gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start + - gd->bd->bi_dram[0].size; - gd->bd->bi_dram[1].size = size; -#endif - - return 0; -} - -/********************************************************** - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers - * specific to the hardware - *********************************************************/ -void set_muxconf_regs(void) -{ - muxSetupSDRC(); - muxSetupGPMC(); - muxSetupUsb0(); /* USB Device */ - muxSetupUsbHost(); /* USB Host */ - muxSetupUART1(); - muxSetupLCD(); - muxSetupMMCSD(); - muxSetupTouchScreen(); -} - -/***************************************************************** - * Routine: peripheral_enable - * Description: Enable the clks & power for perifs (GPT2, UART1,...) - ******************************************************************/ -void peripheral_enable(void) -{ - unsigned int v, if_clks = 0, func_clks = 0; - - /* Enable GP2 timer. */ - if_clks |= BIT4 | BIT3; - func_clks |= BIT4 | BIT3; - /* Sys_clk input OMAP2420_GPT2 */ - v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2; - __raw_writel(v, CM_CLKSEL2_CORE); - __raw_writel(0x1, CM_CLKSEL_WKUP); - -#ifdef CONFIG_SYS_NS16550 - /* Enable UART1 clock */ - func_clks |= BIT21; - if_clks |= BIT21; -#endif - /* Interface clocks on */ - v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; - __raw_writel(v, CM_ICLKEN1_CORE); - /* Functional Clocks on */ - v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; - __raw_writel(v, CM_FCLKEN1_CORE); - delay(1000); - -#ifndef KERNEL_UPDATED - { -#define V1 0xffffffff -#define V2 0x00000007 - - __raw_writel(V1, CM_FCLKEN1_CORE); - __raw_writel(V2, CM_FCLKEN2_CORE); - __raw_writel(V1, CM_ICLKEN1_CORE); - __raw_writel(V1, CM_ICLKEN2_CORE); - } -#endif -} - -/**************************************** - * Routine: muxSetupUsb0 (ostboot) - * Description: Setup usb muxing - *****************************************/ -void muxSetupUsb0(void) -{ - mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f); -} - -/**************************************** - * Routine: muxSetupUSBHost (ostboot) - * Description: Setup USB Host muxing - *****************************************/ -void muxSetupUsbHost(void) -{ - /* V19 */ - write_config_reg(CONTROL_PADCONF_USB1_RCV, 1); - /* W20 */ - write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1); - /* N14 */ - write_config_reg(CONTROL_PADCONF_GPIO69, 3); - /* P15 */ - write_config_reg(CONTROL_PADCONF_GPIO70, 3); - /* L18 */ - write_config_reg(CONTROL_PADCONF_GPIO102, 3); - /* L19 */ - write_config_reg(CONTROL_PADCONF_GPIO103, 3); - /* K15 */ - write_config_reg(CONTROL_PADCONF_GPIO104, 3); - /* K14 */ - write_config_reg(CONTROL_PADCONF_GPIO105, 3); -} - -/**************************************** - * Routine: muxSetupUART1 (ostboot) - * Description: Set up uart1 muxing - *****************************************/ -void muxSetupUART1(void) -{ - /* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_CTS, 0); - /* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_RTS, 0); - /* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_TX, 0); - /* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_RX, 0); -} - -/**************************************** - * Routine: muxSetupLCD (ostboot) - * Description: Setup lcd muxing - *****************************************/ -void muxSetupLCD(void) -{ - /* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D0, 0); - /* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D1, 0); - /* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D2, 0); - /* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D3, 0); - /* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D4, 0); - /* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D5, 0); - /* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D6, 0); - /* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D7, 0); - /* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D8, 0); - /* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D9, 0); - /* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D10, 0); - /* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D11, 0); - /* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D12, 0); - /* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D13, 0); - /* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D14, 0); - /* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D15, 0); - /* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D16, 0); - /* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D17, 0); - /* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0); - /* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0); - /* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0); - /* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0); -} - -/**************************************** - * Routine: muxSetupMMCSD (ostboot) - * Description: set up MMC muxing - *****************************************/ -void muxSetupMMCSD(void) -{ - /* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0); - /* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0); - /* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CMD, 0); - /* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0); - /* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0); - /* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0); - /* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0); - /* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0); - /* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0); - /* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0); - /* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0); - /* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0); -} - -/****************************************** - * Routine: muxSetupTouchScreen (ostboot) - * Description: Set up touch screen muxing - *******************************************/ -void muxSetupTouchScreen(void) -{ - /* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0); - /* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0); - /* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0); - /* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0); -#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1 - /* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_GPIO85, 3); -} - -/*************************************************************** - * Routine: muxSetupGPMC (ostboot) - * Description: Configures balls which cam up in protected mode - ***************************************************************/ -void muxSetupGPMC(void) -{ - /* gpmc_io_dir, MCR */ - volatile unsigned int *MCR = (unsigned int *) 0x4800008C; - *MCR = 0x19000000; - - /* NOR FLASH CS0 */ - /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */ - write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0); - /* MPDB(Multi Port Debug Port) CS1 */ - /* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0); - /* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0); - /* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0); - /* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0); - /* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0); - /* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0); - /* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0); -} - -/**************************************************************** - * Routine: muxSetupSDRC (ostboot) - * Description: Configures balls which come up in protected mode - ****************************************************************/ -void muxSetupSDRC(void) -{ - /* It's set by IPL */ -} diff --git a/board/apollon/config.mk b/board/apollon/config.mk deleted file mode 100644 index 66005d4..0000000 --- a/board/apollon/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2005-2007 -# Samsung Electronics -# -# Samsung December board with OMAP2420 (ARM1136) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# December has 1 bank of 128MB mDDR-SDRAM on CS0 -# December has 1 bank of 00MB mDDR-SDRAM on CS1 -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) ES2 will be configurable -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x83e80000 - -# Used with full SRAM boot. -# This is either with a GP system or a signed boot image. -# easiest, and safest way to go if you can. -#CONFIG_SYS_TEXT_BASE = 0x40270000 - -# Handy to get symbols to debug ROM version. -#CONFIG_SYS_TEXT_BASE = 0x0 -#CONFIG_SYS_TEXT_BASE = 0x08000000 diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S deleted file mode 100644 index f066fe4..0000000 --- a/board/apollon/lowlevel_init.S +++ /dev/null @@ -1,337 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/omap2420.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> -#include "mem.h" - -#define APOLLON_CS0_BASE 0x00000000 - -#ifdef PRCM_CONFIG_I -#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907 -#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013 -#define SDRC_RFR_CTRL_0_VAL 0x00044C01 -#elif defined(PRCM_CONFIG_II) -#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485 -#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C -#define SDRC_RFR_CTRL_0_VAL 0x00030001 -#endif - -#define SDRAM_BASE_ADDRESS 0x80008000 - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - -#ifdef CONFIG_SYS_NOR_BOOT - /* Check running in SDRAM */ - mov r0, pc, lsr #28 - cmp r0, #8 - beq prcm_setup - -flash_setup: - /* In Flash */ - ldr r0, =WD2_BASE - ldr r1, =WD_UNLOCK1 - str r1, [r0, #WSPR] - - ldr r1, =WD_UNLOCK2 - str r1, [r0, #WSPR] - - /* Pin muxing for SDRC */ - mov r1, #0x00 - ldr r0, =0x480000A1 /* ball C12, mode 0 */ - strb r1, [r0] - - ldr r0, =0x48000032 /* ball D11, mode 0 */ - strb r1, [r0] - - ldr r0, =0x480000A3 /* ball B13, mode 0 */ - strb r1, [r0] - - /* SDRC setting */ - ldr r0, =OMAP2420_SDRC_BASE - ldr r1, =0x00000010 - str r1, [r0, #0x10] - - ldr r1, =0x00000100 - str r1, [r0, #0x44] - - /* SDRC CS0 configuration */ - ldr r1, =0x00d04011 - str r1, [r0, #0x80] - - ldr r1, =SDRC_ACTIM_CTRLA_0_VAL - str r1, [r0, #0x9C] - - ldr r1, =SDRC_ACTIM_CTRLB_0_VAL - str r1, [r0, #0xA0] - - ldr r1, =SDRC_RFR_CTRL_0_VAL - str r1, [r0, #0xA4] - - ldr r1, =0x00000041 - str r1, [r0, #0x70] - - /* Manual command sequence */ - ldr r1, =0x00000007 - str r1, [r0, #0xA8] - - ldr r1, =0x00000000 - str r1, [r0, #0xA8] - - ldr r1, =0x00000001 - str r1, [r0, #0xA8] - - ldr r1, =0x00000002 - str r1, [r0, #0xA8] - str r1, [r0, #0xA8] - - /* - * CS0 SDRC Mode register - * Burst length = 4 - DDR memory - * Serial mode - * CAS latency = 3 - */ - ldr r1, =0x00000032 - str r1, [r0, #0x84] - - /* Note: You MUST set EMR values */ - /* EMR1 & EMR2 */ - ldr r1, =0x00000000 - str r1, [r0, #0x88] - str r1, [r0, #0x8C] - -#ifdef OLD_SDRC_DLLA_CTRL - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00007306 - str r1, [r0, #0x60] - - ldr r1, =0x00007303 - str r1, [r0, #0x60] -#else - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x60] - - ldr r1, =0x00000503 - str r1, [r0, #0x60] -#endif - -#ifdef __BROKEN_FEATURE__ - /* SDRC_DLLB_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x68] - - ldr r1, =0x00000503 - str r1, [r0, #0x68] -#endif - - /* little delay after init */ - mov r2, #0x1800 -1: - subs r2, r2, #0x1 - bne 1b - - /* Setup base address */ - ldr r0, =0x00000000 /* NOR address */ - ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */ - ldr r2, =0x20000 /* Size: 128KB */ - -copy_loop: - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - cmp r0, r2 - ble copy_loop - - ldr r1, =SDRAM_BASE_ADDRESS - mov lr, pc - mov pc, r1 -#endif - -prcm_setup: - ldr r0, =OMAP2420_CM_BASE - ldr r1, [r0, #0x544] /* CLKSEL2_PLL */ - bic r1, r1, #0x03 - orr r1, r1, #0x02 - str r1, [r0, #0x544] - - ldr r1, [r0, #0x500] - bic r1, r1, #0x03 - orr r1, r1, #0x01 - str r1, [r0, #0x500] - - ldr r1, [r0, #0x140] - bic r1, r1, #0x1f - orr r1, r1, #0x02 - str r1, [r0, #0x140] - -#ifdef PRCM_CONFIG_I - ldr r1, =0x000003C3 -#else - ldr r1, =0x00000343 -#endif - str r1, [r0, #0x840] - - ldr r1, =0x00000002 - str r1, [r0, #0x340] - - ldr r1, =CM_CLKSEL1_CORE -#ifdef PRCM_CONFIG_I - ldr r2, =0x08300C44 -#else - ldr r2, =0x04600C26 -#endif - str r2, [r1] - - ldr r0, =OMAP2420_CM_BASE - ldr r1, [r0, #0x084] - and r1, r1, #0x01 - cmp r1, #0x01 - bne clkvalid - - b . - -clkvalid: - mov r1, #0x01 - str r1, [r0, #0x080] - -waitvalid: - ldr r1, [r0, #0x084] - and r1, r1, #0x01 - cmp r1, #0x00 - bne waitvalid - - ldr r0, =CM_CLKSEL1_PLL -#ifdef PRCM_CONFIG_I - ldr r1, =0x01837100 -#else - ldr r1, =0x01832100 -#endif - str r1, [r0] - - ldr r0, =PRCM_CLKCFG_CTRL - mov r1, #0x01 - str r1, [r0] - mov r6, #0x50 -loop1: - subs r6, r6, #0x01 - cmp r6, #0x01 - bne loop1 - - ldr r0, =CM_CLKEN_PLL - mov r1, #0x0f - str r1, [r0] - - mov r6, #0x100 -loop2: - subs r6, r6, #0x01 - cmp r6, #0x01 - bne loop2 - - ldr r0, =0x48008200 - ldr r1, =0xbfffffff - str r1, [r0] - - ldr r0, =0x48008210 - ldr r1, =0xfffffff9 - str r1, [r0] - - ldr r0, =0x4806a004 - ldr r1, =0x00 - strb r1, [r0] - - ldr r0, =0x4806a020 - ldr r1, =0x07 - strb r1, [r0] - - ldr r0, =0x4806a00c - ldr r1, =0x83 - strb r1, [r0] - - ldr r0, =0x4806a000 - ldr r1, =0x1a - strb r1, [r0] - - ldr r0, =0x4806a004 - ldr r1, =0x00 - strb r1, [r0] - - ldr r0, =0x4806a00c - ldr r1, =0x03 - strb r1, [r0] - - ldr r0, =0x4806a010 - ldr r1, =0x03 - strb r1, [r0] - - ldr r0, =0x4806a008 - ldr r1, =0x04 - strb r1, [r0] - - ldr r0, =0x4806a020 - ldr r1, =0x00 - strb r1, [r0] - -#if 0 - ldr r0, =0x4806a000 - mov r1, #'u' - strb r1, [r0] -#endif - -#if 0 - /* LED0 OFF */ - ldr r3, =0x480000E5 - mov r4, #0x0b - strb r4, [r3] -#endif - - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* map interrupt controller */ - ldr r0, VAL_INTH_SETUP - mcr p15, 0, r0, c15, c2, 4 - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -VAL_INTH_SETUP: - .word PERIFERAL_PORT_BASE -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK diff --git a/board/apollon/mem.c b/board/apollon/mem.c deleted file mode 100644 index 36bf6e9..0000000 --- a/board/apollon/mem.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Derived from omap2420 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> - -#include "mem.h" - -/************************************************************ - * sdelay() - simple spin loop. Will be constant time as - * its generally used in 12MHz bypass conditions only. This - * is necessary until timers are accessible. - * - * not inline to increase chances its in cache when called - *************************************************************/ -void sdelay(unsigned long loops) -{ - __asm__("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/******************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * (config II default). - * -- called from SRAM, or Flash (using temp SRAM stack). - ********************************************************************/ -void prcm_init(void) { } - -/************************************************************************** - * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow - * command line mem=xyz use all memory with out discontigious support - * compiled in. Could do it at the ATAG, but there really is two banks... - * Called as part of 2nd phase DDR init. - **************************************************************************/ -void make_cs1_contiguous(void) -{ - u32 size, a_add_low, a_add_high; - - size = get_sdr_cs_size(SDRC_CS0_OSET); - size /= SZ_32M; /* find size to offset CS1 */ - a_add_high = (size & 3) << 8; /* set up low field */ - a_add_low = (size & 0x3C) >> 2; /* set up high field */ - __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG); - -} - -/******************************************************** - * mem_ok() - test used to see if timings are correct - * for a part. Helps in gussing which part - * we are currently using. - *******************************************************/ -u32 mem_ok(void) -{ - u32 val1, val2; - u32 pattern = 0x12345678; - - /* clear pos A */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400); - /* pattern to pos B */ - __raw_writel(pattern, OMAP2420_SDRC_CS0); - /* remove pattern off the bus */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4); - /* get pos A value */ - val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400); - val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */ - - /* see if pos A value changed */ - if ((val1 != 0) || (val2 != pattern)) - return (0); - else - return (1); -} - -/******************************************************** - * sdrc_init() - init the sdrc chip selects CS0 and CS1 - * - early init routines, called from flash or - * SRAM. - *******************************************************/ -void sdrc_init(void) -{ -#define EARLY_INIT 1 - /* only init up first bank here */ - do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); -} - -/************************************************************************* - * do_sdrc_init(): initialize the SDRAM for use. - * -called from low level code with stack only. - * -code sets up SDRAM timing and muxing for 2422 or 2420. - * -optimal settings can be placed here, or redone after i2c - * inspection of board info - * - * This is a bit ugly, but should handle all memory moduels - * used with the APOLLON. The first time though this code from s_init() - * we configure the first chip select. Later on we come back and - * will configure the 2nd chip select if it exists. - * - **************************************************************************/ -void do_sdrc_init(u32 offset, u32 early) -{ -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - u32 mux = 0, mtype, mwidth, rev, tval; - - rev = get_cpu_rev(); - if (rev == CPU_2420_2422_ES1) - tval = 1; - else - tval = 0; /* disable bit switched meaning */ - - /* global settings */ - __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ - __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ - __raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */ -#ifdef CONFIG_SYS_NAND_BOOT - /* set nWP, disable limited addr */ - __raw_writel(0x001, GPMC_CONFIG); -#else - /* set nWP, disable limited addr */ - __raw_writel(0x111, GPMC_CONFIG); -#endif - - /* discover bus connection from sysboot */ - if (is_gpmc_muxed() == GPMC_MUXED) - mux = BIT9; - mtype = get_gpmc0_type(); - mwidth = get_gpmc0_width(); - - /* setup cs0 */ - __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */ - sdelay(1000); - -#ifdef CONFIG_SYS_NOR_BOOT - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0); -#else - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, - GPMC_CONFIG1_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0); -#endif - sdelay(2000); - - /* setup cs1 */ - __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */ - sdelay(1000); - - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); - sdelay(2000); - - /* setup cs2 */ - __raw_writel(0x0, GPMC_CONFIG7_2); /* disable current map */ - sdelay(1000); - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, - GPMC_CONFIG1_2); - /* It's same as cs 0 */ - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2); -#ifdef CONFIG_SYS_NOR_BOOT - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2); -#else - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2); -#endif - -#ifndef CONFIG_SYS_NOR_BOOT - /* setup cs3 */ - __raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */ - sdelay(1000); - - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3); -#endif - -#ifndef ASYNC_NOR - __raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa)); - __raw_writew(0x55, (APOLLON_CS3_BASE + 0x554)); - __raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE)); -#endif - sdelay(2000); -} diff --git a/board/apollon/mem.h b/board/apollon/mem.h deleted file mode 100644 index 09c4ea4..0000000 --- a/board/apollon/mem.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _APOLLON_OMAP24XX_MEM_H_ -#define _APOLLON_OMAP24XX_MEM_H_ - -/* Slower full frequency range default timings for x32 operation*/ -#define APOLLON_2420_SDRC_SHARING 0x00000100 -#define APOLLON_2420_SDRC_MDCFG_0_DDR 0x00d04011 -#define APOLLON_2420_SDRC_MR_0_DDR 0x00000032 - -/* optimized timings good for current shipping parts */ -#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x4A59B485 -#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000C - -#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz 0x7BA35907 -#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz 0x00000013 - -#define APOLLON_242X_SDRC_RFR_CTRL_100MHz 0x00030001 -#define APOLLON_242X_SDRC_RFR_CTRL_166MHz 0x00044C01 - -#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz 0x00007306 -#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz 0x00000506 - -#ifdef PRCM_CONFIG_I -#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz -#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz -#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_166MHz -#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_166MHz -#elif PRCM_CONFIG_II -#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz -#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz -#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_100MHz -#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_100MHz -#endif - -/* GPMC settings */ -#ifdef PRCM_CONFIG_I /* L3 at 165MHz */ -/* CS0: OneNAND */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x000c1000 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030400 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x0b841006 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x020f0c11 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000e40|(APOLLON_CS0_BASE >> 24)) - -/* CS1: Ethernet */ -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011203 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C0b1C0a -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) - -/* CS2: OneNAND */ -/* It's same as CS0 */ -# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) - -/* CS3: NOR */ -#ifdef ASYNC_NOR -# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 -#else -# define SYNC_NOR_VALUE 0x24aaa -# define APOLLON_24XX_GPMC_CONFIG1_3 0xe5011211 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00090b01 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00020201 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x09030b03 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x010a0a0c -#endif /* ASYNC_NOR */ -# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000e40|(APOLLON_CS3_BASE >> 24)) -#endif /* endif PRCM_CONFIG_I */ - -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -/* CS0: OneNAND */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00081080 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030300 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x08041004 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x020b0910 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) - -/* CS1: ethernet */ -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00401203 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) - -/* CS2: OneNAND */ -/* It's same as CS0 */ -# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) - -/* CS3: NOR */ -#define ASYNC_NOR -#ifdef ASYNC_NOR -# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 -#else -# define SYNC_NOR_VALUE 0x24aaa -# define APOLLON_24XX_GPMC_CONFIG1_3 0xe1001202 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00151501 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00050501 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x0e070e07 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01131F1F -#endif /* ASYNC_NOR */ -# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000C40|(APOLLON_CS3_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define APOLLON_24XX_GPMC_CONFIG1_0 0x0 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x010C1414 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x3 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00151501 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00060602 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F -# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) -#endif /* endif CONFIG_SYS_PRCM_III */ - -#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */ diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c deleted file mode 100644 index 4f950ae..0000000 --- a/board/apollon/sys_info.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Derived from omap2420 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mem.h> /* get mem tables */ -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> -#include <i2c.h> - -/************************************************************************** - * get_prod_id() - get id info from chips - ***************************************************************************/ -static u32 get_prod_id(void) -{ - u32 p; - p = __raw_readl(PRODUCTION_ID); /* get production ID */ - return ((p & CPU_242X_PID_MASK) >> 16); -} - -/************************************************************************** - * get_cpu_type() - low level get cpu type - * - no C globals yet. - * - just looking to say if this is a 2422 or 2420 or ... - * - to start with we will look at switch settings.. - * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics - * (mux for 2420, non-mux for 2422). - ***************************************************************************/ -u32 get_cpu_type(void) -{ - u32 v; - - switch (get_prod_id()) { - case 1:; /* 2420 */ - case 2: - return (CPU_2420); - break; /* 2420 pop */ - case 4: - return (CPU_2422); - break; - case 8: - return (CPU_2423); - break; - default: - break; /* early 2420/2422's unmarked */ - } - - v = __raw_readl(TAP_IDCODE_REG); - v &= CPU_24XX_ID_MASK; - /* currently 2420 and 2422 have same id */ - if (v == CPU_2420_CHIPID) { - if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */ - return (CPU_2420); - else - return (CPU_2422); - } else - return (CPU_2420); /* don't know, say 2420 */ -} - -/****************************************** - * get_cpu_rev(void) - extract version info - ******************************************/ -u32 get_cpu_rev(void) -{ - u32 v; - v = __raw_readl(TAP_IDCODE_REG); - v = v >> 28; - return (v + 1); /* currently 2422 and 2420 match up */ -} - -/**************************************************** - * is_mem_sdr() - return 1 if mem type in use is SDR - ****************************************************/ -u32 is_mem_sdr(void) -{ - volatile u32 *burst = (volatile u32 *)(SDRC_MR_0 + SDRC_CS0_OSET); - if (*burst == H4_2420_SDRC_MR_0_SDR) - return (1); - return (0); -} - -/*********************************************************** - * get_mem_type() - identify type of mDDR part used. - * 2422 uses stacked DDR, 2 parts CS0/CS1. - * 2420 may have 1 or 2, no good way to know...only init 1... - * when eeprom data is up we can select 1 more. - *************************************************************/ -u32 get_mem_type(void) -{ - u32 cpu, sdr = is_mem_sdr(); - - cpu = get_cpu_type(); - if (cpu == CPU_2422 || cpu == CPU_2423) - return (DDR_STACKED); - - if (get_prod_id() == 0x2) - return (XDR_POP); - - if (get_board_type() == BOARD_H4_MENELAUS) - if (sdr) - return (SDR_DISCRETE); - else - return (DDR_COMBO); - else if (sdr) /* SDP + SDR kit */ - return (SDR_DISCRETE); - else - return (DDR_DISCRETE); /* origional SDP */ -} - -/*********************************************************************** - * get_cs0_size() - get size of chip select 0/1 - ************************************************************************/ -u32 get_sdr_cs_size(u32 offset) -{ - u32 size; - size = __raw_readl(SDRC_MCFG_0 + offset) >> 8; /* get ram size field */ - size &= 0x2FF; /* remove unwanted bits */ - size *= SZ_2M; /* find size in MB */ - return (size); -} - -/*********************************************************************** - * get_board_type() - get board type based on current production stats. - * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info. - * when they are available we can get info from there. This should - * be correct of all known boards up until today. - ************************************************************************/ -u32 get_board_type(void) -{ - return (BOARD_H4_SDP); -} - -/****************************************************************** - * get_sysboot_value() - get init word settings (dip switch on h4) - ******************************************************************/ -inline u32 get_sysboot_value(void) -{ - return (0x00000FFF & __raw_readl(CONTROL_STATUS)); -} - -/*************************************************************************** - * get_gpmc0_base() - Return current address hardware will be - * fetching from. The below effectively gives what is correct, its a bit - * mis-leading compared to the TRM. For the most general case the mask - * needs to be also taken into account this does work in practice. - * - for u-boot we currently map: - * -- 0 to nothing, - * -- 4 to flash - * -- 8 to enent - * -- c to wifi - ****************************************************************************/ -u32 get_gpmc0_base(void) -{ - u32 b; - - b = __raw_readl(GPMC_CONFIG7_0); - b &= 0x1F; /* keep base [5:0] */ - b = b << 24; /* ret 0x0b000000 */ - return (b); -} - -/***************************************************************** - * is_gpmc_muxed() - tells if address/data lines are multiplexed - *****************************************************************/ -u32 is_gpmc_muxed(void) -{ - u32 mux; - mux = get_sysboot_value(); - if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3)) - return (GPMC_MUXED); /* NAND Boot mode */ - if (mux & BIT1) /* if mux'ed */ - return (GPMC_MUXED); - else - return (GPMC_NONMUXED); -} - -/************************************************************************ - * get_gpmc0_type() - read sysboot lines to see type of memory attached - ************************************************************************/ -u32 get_gpmc0_type(void) -{ - u32 type; - type = get_sysboot_value(); - if ((type & (BIT3 | BIT2)) == (BIT3 | BIT2)) - return (TYPE_NAND); - else - return (TYPE_NOR); -} - -/******************************************************************* - * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) - *******************************************************************/ -u32 get_gpmc0_width(void) -{ - u32 width; - width = get_sysboot_value(); - if ((width & 0xF) == (BIT3 | BIT2)) - return (WIDTH_8BIT); - else - return (WIDTH_16BIT); -} - -/********************************************************************* - * wait_on_value() - common routine to allow waiting for changes in - * volatile regs. - *********************************************************************/ -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) -{ - u32 i = 0, val; - do { - ++i; - val = __raw_readl(read_addr) & read_bit_mask; - if (val == match_value) - return (1); - if (i == bound) - return (0); - } while (1); -} - -/********************************************************************* - * display_board_info() - print banner with board info. - *********************************************************************/ -void display_board_info(u32 btype) -{ - char cpu_2420[] = "2420"; /* cpu type */ - char cpu_2422[] = "2422"; - char cpu_2423[] = "2423"; - char mem_sdr[] = "mSDR"; /* memory type */ - char mem_ddr[] = "mDDR"; - char t_tst[] = "TST"; /* security level */ - char t_emu[] = "EMU"; - char t_hs[] = "HS"; - char t_gp[] = "GP"; - char unk[] = "?"; - - char *cpu_s, *mem_s, *sec_s; - u32 cpu, rev, sec; - - rev = get_cpu_rev(); - cpu = get_cpu_type(); - sec = get_device_type(); - - if (is_mem_sdr()) - mem_s = mem_sdr; - else - mem_s = mem_ddr; - - if (cpu == CPU_2423) - cpu_s = cpu_2423; - else if (cpu == CPU_2422) - cpu_s = cpu_2422; - else - cpu_s = cpu_2420; - - switch (sec) { - case TST_DEVICE: - sec_s = t_tst; - break; - case EMU_DEVICE: - sec_s = t_emu; - break; - case HS_DEVICE: - sec_s = t_hs; - break; - case GP_DEVICE: - sec_s = t_gp; - break; - default: - sec_s = unk; - } - - printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1); - printf("Samsung Apollon SDP Base Board + %s \n", mem_s); -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = 242x IP platform (first 2xx boards) - * 1 = 242x Menelaus platfrom. - *************************************************************************/ -u32 get_board_rev(void) -{ - u32 rev = 0; - u32 btype = get_board_type(); - - if (btype == BOARD_H4_MENELAUS) - rev = 1; - return (rev); -} - -/******************************************************** - * get_base(); get upper addr of current execution - *******************************************************/ -u32 get_base(void) -{ - u32 val; - __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); - val &= 0xF0000000; - val >>= 28; - return (val); -} - -/******************************************************** - * get_base2(); get 2upper addr of current execution - *******************************************************/ -u32 get_base2(void) -{ - u32 val; - __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); - val &= 0xFF000000; - val >>= 24; - return (val); -} - -/******************************************************** - * running_in_flash() - tell if currently running in - * flash. - *******************************************************/ -u32 running_in_flash(void) -{ - if (get_base() < 4) - return (1); /* in flash */ - return (0); /* running in SRAM or SDRAM */ -} - -/******************************************************** - * running_in_sram() - tell if currently running in - * sram. - *******************************************************/ -u32 running_in_sram(void) -{ - if (get_base() == 4) - return (1); /* in SRAM */ - return (0); /* running in FLASH or SDRAM */ -} - -/******************************************************** - * running_in_sdram() - tell if currently running in - * flash. - *******************************************************/ -u32 running_in_sdram(void) -{ - if (get_base() > 4) - return (1); /* in sdram */ - return (0); /* running in SRAM or FLASH */ -} - -/************************************************************* - * running_from_internal_boot() - am I a signed NOR image. - *************************************************************/ -u32 running_from_internal_boot(void) -{ - u32 v, base; - - v = get_sysboot_value() & BIT3; - base = get_base2(); - /* if running at mask rom flash address and - * sysboot3 says this was an internal boot - */ - if ((base == 0x08) && v) - return (1); - else - return (0); -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (BIT10 | BIT9 | BIT8); - return (mode >>= 8); -} diff --git a/boards.cfg b/boards.cfg index 72e7803..ec0f29c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -50,7 +50,6 @@ tt01 arm arm1136 - hale imx31_litekit arm arm1136 - logicpd mx31 flea3 arm arm1136 - CarMediaLab mx35 mx35pdk arm arm1136 - freescale mx35 -apollon arm arm1136 apollon - omap24xx omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x rpi_b arm arm1176 rpi_b raspberrypi bcm2835 diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 4b5558d..30c3451 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +apollon arm omap24xx - 2012-09-06 Minkyu Kang <promsoft(a)gmail.com> tb0229 mips mips32 - 2011-12-12 rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd(a)denx.de> OXC powerpc MPC8240 309a292 2011-12-07 diff --git a/include/configs/apollon.h b/include/configs/apollon.h deleted file mode 100644 index b8ca8a8..0000000 --- a/include/configs/apollon.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * (C) Copyright 2005-2008 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Configuration settings for the 2420 Samsung Apollon board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420_APOLLON 1 -#define CONFIG_APOLLON 1 -#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ - -#define CONFIG_ONENAND_U_BOOT y - -/* Clock config to target*/ -#define PRCM_CONFIG_I 1 -/* #define PRCM_CONFIG_II 1 */ - -/* Boot method */ -/* uncomment if you use NOR boot */ -/* #define CONFIG_SYS_NOR_BOOT 1 */ - -/* uncomment if you use NOR on CS3 */ -/* #define CONFIG_SYS_USE_NOR 1 */ - -#ifdef CONFIG_SYS_NOR_BOOT -#undef CONFIG_SYS_USE_NOR -#define CONFIG_SYS_USE_NOR 1 -#endif - -/* uncommnet if you want to use UBI */ -#define CONFIG_SYS_USE_UBI - -#include <asm/arch/omap2420.h> /* get chip and board defs */ - -#define V_SCLK 12000000 - -/* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ -#define CONFIG_SYS_CLK_FREQ V_SCLK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CONFIG_ENV_SIZE_FLEX SZ_256K -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) - -/* - * Hardware drivers - */ - -/* - * SMC91c96 Etherent - */ -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) -#define CONFIG_LAN91C96_EXT_PHY - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* UART1 on H4 */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ONENAND - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_UBI -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#endif - -#undef CONFIG_CMD_SOURCE - -#ifndef CONFIG_SYS_USE_NOR -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_IMLS -#endif - -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT - -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.116.25 -#define CONFIG_SERVERIP 192.168.116.1 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_ETHADDR 00:0E:99:00:24:20 - -#ifdef CONFIG_APOLLON_PLUS -#define CONFIG_SYS_MEM "mem=64M" -#else -#define CONFIG_SYS_MEM "mem=128" -#endif - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_SYS_UBI "ubi.mtd=4" -#else -#define CONFIG_SYS_UBI "" -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \ - " console=ttyS0,115200n8" \ - " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \ - "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \ - CONFIG_SYS_UBI - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "Image=tftp 0x80008000 Image; go 0x80008000\0" \ - "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ - "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ - "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ - "xloader=tftp 0x80180000 x-load.bin; " \ - " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ - "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ - "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ - "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \ - "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \ - "onesyncboot=run syncmode oneboot\0" \ - "updateb=tftp 0x80180000 u-boot-onenand.bin; " \ - " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \ - "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \ - "bootcmd=run uboot\0" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Apollon # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) - -/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) - * or by 32KHz clk, or from external sig. This rate is divided by a local - * divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE SZ_128M -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#ifdef CONFIG_SYS_USE_NOR -/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ -# define CONFIG_SYS_FLASH_BASE 0x18000000 -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -# define CONFIG_SYS_MAX_FLASH_SECT 1024 -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* Flash memory is CFI compliant */ -# define CONFIG_SYS_FLASH_CFI 1 -# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* Use buffered writes (~10x faster) */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ -/* Use h/w sector protection*/ -# define CONFIG_SYS_FLASH_PROTECTION 1 - -#else /* !CONFIG_SYS_USE_NOR */ -# define CONFIG_SYS_NO_FLASH 1 -#endif /* CONFIG_SYS_USE_NOR */ - -/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ -#define CONFIG_SYS_ONENAND_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */ -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_ADDR 0x00020000 -#define CONFIG_ENV_ADDR_FLEX 0x00040000 - -#ifdef CONFIG_SYS_USE_UBI -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "onenand0=onenand" -#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \ - "128k(params)," \ - "2m(kernel)," \ - "16m(rootfs)," \ - "32m(fs)," \ - "-(ubifs)" -#endif - -#define PHYS_SRAM 0x4020F800 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM - -#endif /* __CONFIG_H */ diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile deleted file mode 100644 index 3bc9920..0000000 --- a/onenand_ipl/board/apollon/Makefile +++ /dev/null @@ -1,87 +0,0 @@ - -include $(TOPDIR)/config.mk -include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk - -LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds -LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS) -AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_ONENAND_IPL -CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_ONENAND_IPL -OBJCFLAGS += --gap-fill=0x00 - -SOBJS := low_levelinit.o -SOBJS += start.o -COBJS := apollon.o -COBJS += onenand_read.o -COBJS += onenand_boot.o - -SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR) - -onenandobj := $(OBJTREE)/onenand_ipl/ - -ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin $(onenandobj)onenand-ipl-4k.bin - -all: $(obj).depend $(ALL) - -$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl - $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x800 -O binary $< $@ - -$(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl - $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x1000 -O binary $< $@ - -$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -$(onenandobj)onenand-ipl: $(OBJS) $(onenandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ - -Map $@.map -o $@ - -$(onenandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links from common files - -# from cpu directory -$(obj)start.S: - @rm -f $@ - ln -s $(SRCTREE)/$(CPUDIR)/start.S $@ - -# from onenand_ipl directory -$(obj)onenand_ipl.h: - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@ - -$(obj)onenand_boot.c: $(obj)onenand_ipl.h - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@ - -$(obj)onenand_read.c: $(obj)onenand_ipl.h - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@ - -ifneq ($(OBJTREE), $(SRCTREE)) -$(obj)apollon.c: - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/apollon.c $@ - -$(obj)low_levelinit.S: - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/low_levelinit.S $@ -endif - -######################################################################### - -$(obj)%.o: $(obj)%.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)%.o: $(obj)$.c - $(CC) $(CFLAGS) -c -o $@ $< - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/onenand_ipl/board/apollon/apollon.c b/onenand_ipl/board/apollon/apollon.c deleted file mode 100644 index 4936e00..0000000 --- a/onenand_ipl/board/apollon/apollon.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * (C) Copyright 2005-2008 Samsung Electronics - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/arch/mux.h> - -#define write_config_reg(reg, value) \ -do { \ - writeb(value, reg); \ -} while (0) - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init(void) -{ - return 0; -} - -#ifdef CONFIG_SYS_PRINTF -/* Pin Muxing registers used for UART1 */ -/**************************************** - * Routine: muxSetupUART1 (ostboot) - * Description: Set up uart1 muxing - *****************************************/ -static void muxSetupUART1(void) -{ - /* UART1_CTS pin configuration, PIN = D21 */ - write_config_reg(CONTROL_PADCONF_UART1_CTS, 0); - /* UART1_RTS pin configuration, PIN = H21 */ - write_config_reg(CONTROL_PADCONF_UART1_RTS, 0); - /* UART1_TX pin configuration, PIN = L20 */ - write_config_reg(CONTROL_PADCONF_UART1_TX, 0); - /* UART1_RX pin configuration, PIN = T21 */ - write_config_reg(CONTROL_PADCONF_UART1_RX, 0); -} -#endif - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called at time when only stack is available. - **********************************************************/ -int s_init(int skip) -{ -#ifdef CONFIG_SYS_PRINTF - muxSetupUART1(); -#endif - return 0; -} diff --git a/onenand_ipl/board/apollon/config.mk b/onenand_ipl/board/apollon/config.mk deleted file mode 100644 index 62956e8..0000000 --- a/onenand_ipl/board/apollon/config.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2005-2008 Samsung Electronics -# Kyungmin Park <kyungmin.park(a)samsung.com> -# -# Samsung Apollon board with OMAP2420 (ARM1136) cpu -# -# Apollon has 1 bank of 128MB mDDR-SDRAM on CS0 -# Physical Address: -# 8000'0000 (bank0) -# 8800'0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -CONFIG_SYS_TEXT_BASE = 0x00000000 diff --git a/onenand_ipl/board/apollon/low_levelinit.S b/onenand_ipl/board/apollon/low_levelinit.S deleted file mode 100644 index cab4227..0000000 --- a/onenand_ipl/board/apollon/low_levelinit.S +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2005-2008 Samsung Electronics - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Derived from board/omap2420h4/platform.S - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/arch/omap2420.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> - -#define APOLLON_CS0_BASE 0x00000000 - -#ifdef PRCM_CONFIG_I -#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907 -#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013 -#define SDRC_RFR_CTRL_0_VAL 0x00044C01 - -/* GPMC */ -#define APOLLON_GPMC_CONFIG1_0 0xe30d1201 -#define APOLLON_GPMC_CONFIG2_0 0x000c1000 -#define APOLLON_GPMC_CONFIG3_0 0x00030400 -#define APOLLON_GPMC_CONFIG4_0 0x0B841006 -#define APOLLON_GPMC_CONFIG5_0 0x020F0C11 -#define APOLLON_GPMC_CONFIG6_0 0x00000000 -#define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24)) - -#elif defined(PRCM_CONFIG_II) -#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485 -#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C -#define SDRC_RFR_CTRL_0_VAL 0x00030001 - -/* GPMC */ -#define APOLLON_GPMC_CONFIG1_0 0xe30d1201 -#define APOLLON_GPMC_CONFIG2_0 0x00080E81 -#define APOLLON_GPMC_CONFIG3_0 0x00030400 -#define APOLLON_GPMC_CONFIG4_0 0x08041586 -#define APOLLON_GPMC_CONFIG5_0 0x020C090E -#define APOLLON_GPMC_CONFIG6_0 0x00000000 -#define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24)) - -#else -#error "Please configure PRCM schecm" -#endif - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - mov r3, r0 /* save skip information */ - - /* Disable watchdog */ - ldr r0, =WD2_BASE - ldr r1, =WD_UNLOCK1 - str r1, [r0, #WSPR] - - ldr r1, =WD_UNLOCK2 - str r1, [r0, #WSPR] - -#ifdef DEBUG_LED - /* LED0 OFF */ - ldr r0, =0x480000E5 /* ball AA10, mode 3 */ - mov r1, #0x0b - strb r1, [r0] -#endif - - /* Pin muxing for SDRC */ - mov r1, #0x00 - ldr r0, =0x480000A1 /* ball C12, mode 0 */ - strb r1, [r0] - - ldr r0, =0x48000032 /* ball D11, mode 0 */ - strb r1, [r0] - - ldr r0, =0x480000A3 /* ball B13, mode 0 */ - strb r1, [r0] - - /* SDRC setting */ - ldr r0, =OMAP2420_SDRC_BASE - ldr r1, =0x00000010 - str r1, [r0, #0x10] - - ldr r1, =0x00000100 - str r1, [r0, #0x44] - - /* SDRC CS0 configuration */ -#ifdef CONFIG_APOLLON_PLUS - ldr r1, =0x01702011 -#else - ldr r1, =0x00d04011 -#endif - str r1, [r0, #0x80] - - ldr r1, =SDRC_ACTIM_CTRLA_0_VAL - str r1, [r0, #0x9C] - - ldr r1, =SDRC_ACTIM_CTRLB_0_VAL - str r1, [r0, #0xA0] - - ldr r1, =SDRC_RFR_CTRL_0_VAL - str r1, [r0, #0xA4] - - ldr r1, =0x00000041 - str r1, [r0, #0x70] - - /* Manual command sequence */ - ldr r1, =0x00000007 - str r1, [r0, #0xA8] - - ldr r1, =0x00000000 - str r1, [r0, #0xA8] - - ldr r1, =0x00000001 - str r1, [r0, #0xA8] - - ldr r1, =0x00000002 - str r1, [r0, #0xA8] - str r1, [r0, #0xA8] - - /* - * CS0 SDRC Mode register - * Burst length = 4 - DDR memory - * Serial mode - * CAS latency = 3 - */ - ldr r1, =0x00000032 - str r1, [r0, #0x84] - - /* Note: You MUST set EMR values */ - /* EMR1 & EMR2 */ - ldr r1, =0x00000000 - str r1, [r0, #0x88] - str r1, [r0, #0x8C] - -#ifdef OLD_SDRC_DLLA_CTRL - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00007306 - str r1, [r0, #0x60] - - ldr r1, =0x00007303 - str r1, [r0, #0x60] -#else - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x60] - - ldr r1, =0x00000503 - str r1, [r0, #0x60] -#endif - -#ifdef __BROKEN_FEATURE__ - /* SDRC_DLLB_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x68] - - ldr r1, =0x00000503 - str r1, [r0, #0x68] -#endif - - /* little delay after init */ - mov r2, #0x1800 -1: - subs r2, r2, #0x1 - bne 1b - - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - mov r0, r3 /* pass skip info to s_init */ - - bl s_init /* go setup pll,mux,memory */ - - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK diff --git a/onenand_ipl/board/apollon/u-boot.onenand.lds b/onenand_ipl/board/apollon/u-boot.onenand.lds deleted file mode 100644 index 721d2f5..0000000 --- a/onenand_ipl/board/apollon/u-boot.onenand.lds +++ /dev/null @@ -1,53 +0,0 @@ -/* - * (C) Copyright 2005-2008 Samsung Electronics - * Kyungmin Park <kyungmin.park(a)samsung.com> - * - * Derived from X-loader - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) . = ALIGN(4); } - __bss_end__ = .; -} -- 1.7.10.4

3 7

[U-Boot] [PATCH] env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
by Stephen Warren 18 Sep '12

18 Sep '12

From: Stephen Warren <swarren(a)nvidia.com> The third parameter to ALLOC_CACHE_ALIGN_BUFFER is not size (as named), but rather count (number of elements of the type to allocate). The current code ends up allocating one copy of env_t for each byte in its size, which quite possibly ends up overflowing RAM. This fixes a bug in commit 3801a15 "env_nand: align NAND buffers". Reported-by: Prabhakar Lad <prabhakar.csengg(a)gmail.com> Signed-off-by: Stephen Warren <swarren(a)nvidia.com> --- common/env_nand.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/env_nand.c b/common/env_nand.c index e635472..79e8033 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -226,7 +226,7 @@ int saveenv(void) int saveenv(void) { int ret = 0; - ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, sizeof(env_t)); + ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); ssize_t len; char *res; nand_erase_options_t nand_erase_options; -- 1.7.0.4

3 3

[U-Boot] [PATCH v1 0/5] env: handle special variables and selective env default
by Gerlando Falauto 18 Sep '12

18 Sep '12

This patchset modifies the handling of all the operations on the environment (set/import/default) so to unify handling of special variables. On top of that we implement a selective "env default". A selective "env import" would imply a user API change and should therefore be discussed separately. Changes in the syntax (user API): - "env default" -f: override write-once variables, -a means all First patch is a cosmetic prerequisite to the second patch which constifies serial_assign(). Changes from v0: - checkpatch cleanup - removed himport_ex() - removed warning for serial_assign() - env import NOT implemented here Gerlando Falauto (5): serial: cosmetic checkpatch compliance serial: constify serial_assign() env: unify logic to check and apply changes env: check and apply changes on delete/destroy env: make "env default" selective, check and apply README | 2 + common/cmd_nvedit.c | 209 +++++++++++++++++++++++++++++++--------------- common/env_common.c | 35 +++++++- common/serial.c | 51 ++++++------ include/config_cmd_all.h | 1 + include/environment.h | 12 +++ include/search.h | 23 +++++- include/serial.h | 19 ++-- lib/hashtable.c | 61 ++++++++++++-- 9 files changed, 300 insertions(+), 113 deletions(-)

8 103

[U-Boot] [PATCH 0/5] Cleanup and extend env vars
by Benoît Thébaudeau 18 Sep '12

18 Sep '12

Hi all, This series does some cleanup regarding env vars, and it adds a new env var for the board revision. Best regards, Benoît

5 33

[U-Boot] [PATCH] spl: remove forced linking of commands into SPL
by Tyler Olmstead 18 Sep '12

18 Sep '12

Remove linker command line options from the SPL makefile that force the inclusion of unreferenced command code from linked object files. As commands are not used in the SPL, these options resulted in an unnecessary increase in the image size, in addition to introducing the possibility of tricky link errors in the case where the command code contained symbols that were not resolved by linking in the limited objects compiled in the SPL build. Signed-off-by: Tyler Olmstead <tyler.j.olmstead(a)gmail.com> --- spl/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/spl/Makefile b/spl/Makefile index ea7d475..0c30a85 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -126,9 +126,7 @@ $(obj)u-boot-spl.bin: $(obj)u-boot-spl $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ GEN_UBOOT = \ - UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) | \ - sed -n -e 's/.*$$(SYM_PREFIX)__u_boot_cmd_.*$/-u\1/p'|sort|uniq`;\ - cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__START) \ + cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot-spl.map -o u-boot-spl -- 1.7.9.5

2 6

[U-Boot] [PATCH 4/7] FAT: Fix file contents listed as directory
by Benoît Thébaudeau 18 Sep '12

18 Sep '12

With: fatls mmc 0 /dir/file dir: regular directory file: regular file The previous code read the contents of file as if it were directory entries to list. This patch refuses to list file contents as if it were a folder. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau(a)advansee.com> Cc: Wolfgang Denk <wd(a)denx.de> --- .../fs/fat/fat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git u-boot-66714b1.orig/fs/fat/fat.c u-boot-66714b1/fs/fat/fat.c index fcce412..943cdb6 100644 --- u-boot-66714b1.orig/fs/fat/fat.c +++ u-boot-66714b1/fs/fat/fat.c @@ -1105,11 +1105,11 @@ rootdir_done: goto exit; } - if (idx >= 0) { - if (!(dentptr->attr & ATTR_DIR)) - goto exit; + if (isdir && !(dentptr->attr & ATTR_DIR)) + goto exit; + + if (idx >= 0) subname = nextname; - } } ret = get_contents(mydata, dentptr, buffer, maxsize);

3 4