July 2012 - U-Boot

[U-Boot] [PATCH 8/8] video: support exynos pwm backlight driver
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/include/asm/arch-exynos/pwm_backlight.h | 34 +++++++++++++ drivers/video/Makefile | 1 + drivers/video/exynos_pwm_bl.c | 57 ++++++++++++++++++++++ 3 files changed, 92 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/pwm_backlight.h create mode 100644 drivers/video/exynos_pwm_bl.c diff --git a/arch/arm/include/asm/arch-exynos/pwm_backlight.h b/arch/arm/include/asm/arch-exynos/pwm_backlight.h new file mode 100644 index 0000000..368ffc5 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pwm_backlight.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PWM_BACKLIGHT_H_ +#define _PWM_BACKLIGHT_H_ + +struct pwm_backlight_data { + int pwm_id; + int period; + int max_brightness; + int brightness; +}; + +extern int exynos_pwm_backlight_init(struct pwm_backlight_data *pd); + +#endif /* _PWM_BACKLIGHT_H_ */ diff --git a/drivers/video/Makefile b/drivers/video/Makefile index a7530a4..4a0a5b4 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_EXYNOS_DP) += exynos_dp.o exynos_dp_lowlevel.o COBJS-$(CONFIG_EXYNOS_FB) += exynos_fb.o exynos_fimd.o COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o +COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o diff --git a/drivers/video/exynos_pwm_bl.c b/drivers/video/exynos_pwm_bl.c new file mode 100644 index 0000000..27fb0b5 --- /dev/null +++ b/drivers/video/exynos_pwm_bl.c @@ -0,0 +1,57 @@ +/* + * PWM BACKLIGHT driver for Board based on EXYNOS. + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * Derived from linux/drivers/video/backlight/pwm_backlight.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <common.h> +#include <pwm.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pwm.h> +#include <asm/arch/pwm_backlight.h> + +static struct pwm_backlight_data *pwm; + +static int exynos_pwm_backlight_update_status(void) +{ + int brightness = pwm->brightness; + int max = pwm->max_brightness; + + if (brightness == 0) { + pwm_config(pwm->pwm_id, 0, pwm->period); + pwm_disable(pwm->pwm_id); + } else { + pwm_config(pwm->pwm_id, + brightness * pwm->period / max, pwm->period); + pwm_enable(pwm->pwm_id); + } + return 0; +} + +int exynos_pwm_backlight_init(struct pwm_backlight_data *pd) +{ + pwm = pd; + + exynos_pwm_backlight_update_status(); + + return 0; +} -- 1.7.4.1

1 0

[U-Boot] [PATCH 7/8] video: exynos fb driver supports display port feature
by Donghwa Lee 02 Jul '12

02 Jul '12

If dp_enabled was set, exynos fb driver support display port feature. This patch depends on [PATCH] video: support exynos fimd driver for various exynos series. http://marc.info/?l=u-boot&m=134119605104467&w=2 Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/include/asm/arch-exynos/fb.h | 1 + drivers/video/exynos_fb.c | 5 ++++- drivers/video/exynos_fimd.c | 15 +++++++++++++++ 3 files changed, 20 insertions(+), 1 deletions(-) diff --git a/arch/arm/include/asm/arch-exynos/fb.h b/arch/arm/include/asm/arch-exynos/fb.h index bc0a4cb..a3790e2 100644 --- a/arch/arm/include/asm/arch-exynos/fb.h +++ b/arch/arm/include/asm/arch-exynos/fb.h @@ -152,6 +152,7 @@ struct exynos_fb { unsigned char res15[156]; unsigned int dualrgb; unsigned char res16[16]; + unsigned int dp_mie_clkcon; }; #endif diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index 49fdfec..e31a0fd 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -28,6 +28,7 @@ #include <asm/arch/clock.h> #include <asm/arch/clk.h> #include <asm/arch/mipi_dsim.h> +#include <asm/arch/dp_info.h> #include <asm/arch/system.h> #include "exynos_fb.h" @@ -91,6 +92,9 @@ static void lcd_panel_on(vidinfo_t *vid) udelay(vid->power_on_delay); + if (vid->dp_enabled) + exynos_init_dp(); + if (vid->reset_lcd) { vid->reset_lcd(); udelay(vid->reset_delay); @@ -130,7 +134,6 @@ void lcd_enable(void) if (panel_info.logo_on) { memset(lcd_base, 0, panel_width * panel_height * (NBITS(panel_info.vl_bpix) >> 3)); - draw_logo(); } diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c index 989063d..6539902 100644 --- a/drivers/video/exynos_fimd.c +++ b/drivers/video/exynos_fimd.c @@ -57,6 +57,19 @@ static void exynos_fimd_set_dualrgb(unsigned int enabled) writel(cfg, &fimd_ctrl->dualrgb); } +static void exynos_fimd_set_dp_clkcon(unsigned int enabled) +{ + + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); + unsigned int cfg = 0; + + if (enabled) + cfg = EXYNOS_DP_CLK_ENABLE; + + writel(cfg, &fimd_ctrl->dp_mie_clkcon); +} + static void exynos_fimd_set_par(unsigned int win_id) { unsigned int cfg = 0; @@ -363,6 +376,8 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) /* window on */ exynos_fimd_window_on(pvid->win_id); + + exynos_fimd_set_dp_clkcon(pvid->dp_enabled); } unsigned long exynos_fimd_calc_fbsize(void) -- 1.7.4.1

1 0

[U-Boot] [PATCH 6/8] video: add dp_enabled variable in vidinfo structure
by Donghwa Lee 02 Jul '12

02 Jul '12

To support display port in exynos fb driver, added dp_enabled variable in vidinfo structure that set in board file. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- include/lcd.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/lcd.h b/include/lcd.h index 6e0a2a3..42070d7 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -240,6 +240,7 @@ typedef struct vidinfo { unsigned int reset_delay; unsigned int interface_mode; unsigned int mipi_enabled; + unsigned int dp_enabled; unsigned int cs_setup; unsigned int wr_setup; unsigned int wr_act; -- 1.7.4.1

1 0

[U-Boot] [PATCH 5/8] video: support exynos display port drivers
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch set supports exynos display port drivers. DisplayPort is an industry standard device to accommodate the increasing board adoption of digital display technology within the PC and consumer electronics. The interface supports internal chip-to-chip and external box-to-box digital display connections. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/include/asm/arch-exynos/dp.h | 751 ++++++++++++++++ arch/arm/include/asm/arch-exynos/dp_info.h | 214 +++++ drivers/video/Makefile | 1 + drivers/video/exynos_dp.c | 925 ++++++++++++++++++++ drivers/video/exynos_dp_lowlevel.c | 1291 ++++++++++++++++++++++++++++ drivers/video/exynos_dp_lowlevel.h | 80 ++ 6 files changed, 3262 insertions(+), 0 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/dp.h create mode 100644 arch/arm/include/asm/arch-exynos/dp_info.h create mode 100644 drivers/video/exynos_dp.c create mode 100644 drivers/video/exynos_dp_lowlevel.c create mode 100644 drivers/video/exynos_dp_lowlevel.h diff --git a/arch/arm/include/asm/arch-exynos/dp.h b/arch/arm/include/asm/arch-exynos/dp.h new file mode 100644 index 0000000..69c65f7 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp.h @@ -0,0 +1,751 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DP_H_ +#define __ASM_ARM_ARCH_DP_H_ + +#ifndef __ASSEMBLY__ + +struct exynos_dp { + unsigned char res1[0x10]; + unsigned int tx_version; + unsigned int tx_sw_reset; + unsigned int func_en1; + unsigned int func_en2; + unsigned int video_ctl1; + unsigned int video_ctl2; + unsigned int video_ctl3; + unsigned int video_ctl4; + unsigned int color_blue_cb; + unsigned int color_green_y; + unsigned int color_red_cr; + unsigned int video_ctl8; + unsigned char res2[0x4]; + unsigned int video_ctl10; + unsigned int total_ln_cfg_l; + unsigned int total_ln_cfg_h; + unsigned int active_ln_cfg_l; + unsigned int active_ln_cfg_h; + unsigned int vfp_cfg; + unsigned int vsw_cfg; + unsigned int vbp_cfg; + unsigned int total_pix_cfg_l; + unsigned int total_pix_cfg_h; + unsigned int active_pix_cfg_l; + unsigned int active_pix_cfg_h; + unsigned int hfp_cfg_l; + unsigned int hfp_cfg_h; + unsigned int hsw_cfg_l; + unsigned int hsw_cfg_h; + unsigned int hbp_cfg_l; + unsigned int hbp_cfg_h; + unsigned int video_status; + unsigned int total_ln_sta_l; + unsigned int total_ln_sta_h; + unsigned int active_ln_sta_l; + unsigned int active_ln_sta_h; + + unsigned int vfp_sta; + unsigned int vsw_sta; + unsigned int vbp_sta; + + unsigned int total_pix_sta_l; + unsigned int total_pix_sta_h; + unsigned int active_pix_sta_l; + unsigned int active_pix_sta_h; + + unsigned int hfp_sta_l; + unsigned int hfp_sta_h; + unsigned int hsw_sta_l; + unsigned int hsw_sta_h; + unsigned int hbp_sta_l; + unsigned int hbp_sta_h; + + unsigned char res3[0x288]; + + unsigned int lane_map; + unsigned char res4[0x10]; + unsigned int analog_ctl1; + unsigned int analog_ctl2; + unsigned int analog_ctl3; + + unsigned int pll_filter_ctl1; + unsigned int amp_tuning_ctl; + unsigned char res5[0xc]; + + unsigned int aux_hw_retry_ctl; + unsigned char res6[0x2c]; + unsigned int int_state; + unsigned int common_int_sta1; + unsigned int common_int_sta2; + unsigned int common_int_sta3; + unsigned int common_int_sta4; + unsigned char res7[0x8]; + + unsigned int int_sta; + unsigned char res8[0x1c]; + unsigned int int_ctl; + unsigned char res9[0x200]; + unsigned int sys_ctl1; + unsigned int sys_ctl2; + unsigned int sys_ctl3; + unsigned int sys_ctl4; + unsigned int vid_ctl; + unsigned char res10[0x2c]; + unsigned int pkt_send_ctl; + unsigned char res[0x4]; + unsigned int hdcp_ctl; + unsigned char res11[0x34]; + unsigned int link_bw_set; + + unsigned int lane_count_set; + unsigned int training_ptn_set; + unsigned int ln0_link_training_ctl; + unsigned int ln1_link_training_ctl; + unsigned int ln2_link_training_ctl; + unsigned int ln3_link_training_ctl; + unsigned int dn_spread_ctl; + unsigned int hw_link_training_ctl; + unsigned char res12[0x1c]; + + unsigned int debug_ctl; + unsigned int hpd_deglitch_l; + unsigned int hpd_deglitch_h; + + unsigned char res13[0x14]; + unsigned int link_debug_ctl; + + unsigned char res14[0x1c]; + + unsigned int m_vid0; + unsigned int m_vid1; + unsigned int m_vid2; + unsigned int n_vid0; + unsigned int n_vid1; + unsigned int n_vid2; + unsigned int m_vid_mon; + unsigned int pll_ctl; + unsigned int phy_pd; + unsigned int phy_test; + unsigned char res15[0x8]; + + unsigned int video_fifo_thrd; + unsigned char res16[0x8]; + unsigned int audio_margin; + + unsigned int dn_spread_ctl1; + unsigned int dn_spread_ctl2; + unsigned char res17[0x18]; + unsigned int m_cal_ctl; + unsigned int m_vid_gen_filter_th; + unsigned char res18[0x10]; + unsigned int m_aud_gen_filter_th; + unsigned char res50[0x4]; + + unsigned int aux_ch_sta; + unsigned int aux_err_num; + unsigned int aux_ch_defer_ctl; + unsigned int aux_rx_comm; + unsigned int buffer_data_ctl; + + unsigned int aux_ch_ctl1; + unsigned int aux_addr_7_0; + unsigned int aux_addr_15_8; + unsigned int aux_addr_19_16; + unsigned int aux_ch_ctl2; + unsigned char res19[0x18]; + unsigned int buf_data0; + unsigned char res20[0x3c]; + + unsigned int soc_general_ctl; + unsigned char res21[0x8c]; + unsigned int crc_con; + unsigned int crc_result; + unsigned char res22[0x8]; + + unsigned int common_int_mask1; + unsigned int common_int_mask2; + unsigned int common_int_mask3; + unsigned int common_int_mask4; + unsigned int int_sta_mask1; + unsigned int int_sta_mask2; + unsigned int int_sta_mask3; + unsigned int int_sta_mask4; + unsigned int int_sta_mask; + unsigned int crc_result2; + unsigned int scrambler_reset_cnt; + + unsigned int pn_inv; + unsigned int psr_config; + unsigned int psr_command0; + unsigned int psr_command1; + unsigned int psr_crc_mon0; + unsigned int psr_crc_mon1; + + unsigned char res24[0x30]; + unsigned int phy_bist_ctrl; + unsigned char res25[0xc]; + unsigned int phy_ctrl; + unsigned char res26[0x1c]; + unsigned int test_pattern_gen_en; + unsigned int test_pattern_gen_ctrl; +}; + +#endif /* __ASSEMBLY__ */ + +/* For DP VIDEO CTL 1 */ +#define VIDEO_EN_MASK (0x01 << 7) +#define VIDEO_MUTE_MASK (0x01 << 6) + +/* For DP VIDEO CTL 4 */ +#define VIDEO_BIST_MASK (0x1 << 3) + +/* EXYNOS_DP_ANALOG_CTL_1 */ +#define SEL_BG_NEW_BANDGAP (0x0 << 6) +#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6) +#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4) +#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4) +#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4) +#define SWING_A_30PER_G_INCREASE (0x1 << 3) +#define SWING_A_30PER_G_NORMAL (0x0 << 3) + +/* EXYNOS_DP_ANALOG_CTL_2 */ +#define CPREG_BLEED (0x1 << 4) +#define SEL_24M (0x1 << 3) +#define TX_DVDD_BIT_1_0000V (0x3 << 0) +#define TX_DVDD_BIT_1_0625V (0x4 << 0) +#define TX_DVDD_BIT_1_1250V (0x5 << 0) + +/* EXYNOS_DP_ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5) +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5) +#define SEL_CURRENT_DEFAULT (0x0 << 3) +#define VCO_BIT_000_MICRO (0x0 << 0) +#define VCO_BIT_200_MICRO (0x1 << 0) +#define VCO_BIT_300_MICRO (0x2 << 0) +#define VCO_BIT_400_MICRO (0x3 << 0) +#define VCO_BIT_500_MICRO (0x4 << 0) +#define VCO_BIT_600_MICRO (0x5 << 0) +#define VCO_BIT_700_MICRO (0x6 << 0) +#define VCO_BIT_900_MICRO (0x7 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4) +#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4) +#define TX_CUR1_1X (0x0 << 2) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR1_3X (0x2 << 2) +#define TX_CUR_1_MA (0x0 << 0) +#define TX_CUR_2_MA (0x1 << 0) +#define TX_CUR_3_MA (0x2 << 0) +#define TX_CUR_4_MA (0x3 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_2 */ +#define CH3_AMP_0_MV (0x3 << 12) +#define CH2_AMP_0_MV (0x3 << 8) +#define CH1_AMP_0_MV (0x3 << 4) +#define CH0_AMP_0_MV (0x3 << 0) + +/* EXYNOS_DP_PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) + +/* EXYNOS_DP_INT_CTL */ +#define SOFT_INT_CTRL (0x1 << 2) +#define INT_POL (0x1 << 0) + +/* DP TX SW RESET */ +#define RESET_DP_TX (0x01 << 0) + +/* DP FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (0x1 << 7) +#define SLAVE_VID_FUNC_EN_N (0x1 << 5) +#define AUD_FIFO_FUNC_EN_N (0x1 << 4) +#define AUD_FUNC_EN_N (0x1 << 3) +#define HDCP_FUNC_EN_N (0x1 << 2) +#define CRC_FUNC_EN_N (0x1 << 1) +#define SW_FUNC_EN_N (0x1 << 0) + +/* DP FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_PHY_PD */ +#define PHY_PD (0x1 << 5) +#define AUX_PD (0x1 << 4) +#define CH3_PD (0x1 << 3) +#define CH2_PD (0x1 << 2) +#define CH1_PD (0x1 << 1) +#define CH0_PD (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (0x1 << 7) +#define PLL_LOCK_CHG (0x1 << 6) +#define SPDIF_ERR (0x1 << 5) +#define SPDIF_UNSTBL (0x1 << 4) +#define VID_FORMAT_CHG (0x1 << 3) +#define AUD_CLK_CHG (0x1 << 2) +#define VID_CLK_CHG (0x1 << 1) +#define SW_INT (0x1 << 0) + +/* EXYNOS_DP_DEBUG_CTL */ +#define PLL_LOCK (0x1 << 4) +#define F_PLL_LOCK (0x1 << 3) +#define PLL_LOCK_CTRL (0x1 << 2) + +/* EXYNOS_DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (0x1 << 7) +#define PSR_INACTIVE (0x1 << 6) +#define SPDIF_BI_PHASE_ERR (0x1 << 5) +#define HOTPLUG_CHG (0x1 << 2) +#define HPD_LOST (0x1 << 1) +#define PLUG (0x1 << 0) + +/* EXYNOS_DP_INT_STA */ +#define INT_HPD (0x1 << 6) +#define HW_TRAINING_FINISH (0x1 << 5) +#define RPLY_RECEIV (0x1 << 1) +#define AUX_ERR (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) + +/* EXYNOS_DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) + +#define COMMON_INT_MASK_1 (0) +#define COMMON_INT_MASK_2 (0) +#define COMMON_INT_MASK_3 (0) +#define COMMON_INT_MASK_4 (0) +#define INT_STA_MASK (0) + +/* EXYNOS_DP_BUFFER_DATA_CTL */ +#define BUF_CLR (0x1 << 7) +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0) + +/* EXYNOS_DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) + +/* EXYNOS_DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (0x1 << 1) +#define AUX_EN (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_STA */ +#define AUX_BUSY (0x1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* EXYNOS_DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) + +/* EXYNOS_DP_PHY_TEST */ +#define MACRO_RST (0x1 << 5) +#define CH1_TEST (0x1 << 1) +#define CH0_TEST (0x1 << 0) + +/* EXYNOS_DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (0x1 << 9) +#define HW_LINK_TRAINING_PATTERN (0x1 << 8) +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0) + +/* EXYNOS_DP_TOTAL_LINE_CFG */ +#define TOTAL_LINE_CFG_L(x) ((x) & 0xff) +#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff) +#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff) +#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff) +#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff) +#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) + +#define H_F_PORCH_CFG_L(x) ((x) & 0xff) +#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff) +#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_B_PORCH_CFG_L(x) ((x) & 0xff) +#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) + +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5) +#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_0_SHIFT (3) +#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2) +#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5) +#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_1_SHIFT (3) +#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2) +#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5) +#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_2_SHIFT (3) +#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2) +#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5) +#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_3_SHIFT (3) +#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2) +#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define INTERACE_SCAN_CFG_SHIFT (2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define V_S_POLARITY_CFG_SHIFT (1) +#define HSYNC_POLARITY_CFG (0x1 << 0) +#define H_S_POLARITY_CFG_SHIFT (0) + +/* EXYNOS_DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8) +#define AUDIO_MODE_MASTER_MODE (0x0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4) +#define VIDEO_MASTER_CLK_SEL (0x1 << 2) +#define VIDEO_MASTER_MODE_EN (0x1 << 1) +#define VIDEO_MODE_MASK (0x1 << 0) +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0) +#define VIDEO_MODE_MASTER_MODE (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_1 */ +#define VIDEO_EN (0x1 << 7) +#define HDCP_VIDEO_MUTE (0x1 << 6) + +/* EXYNOS_DP_VIDEO_CTL_2 */ +#define IN_D_RANGE_MASK (0x1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (0x1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4) + +/* EXYNOS_DP_TEST_PATTERN_GEN_EN */ +#define TEST_PATTERN_GEN_EN (0x1 << 0) +#define TEST_PATTERN_GEN_DIS (0x0 << 0) + +/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */ +#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0) +#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0) +#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0) + +/* EXYNOS_DP_VIDEO_CTL_4 */ +#define BIST_EN (0x1 << 3) +#define BIST_WIDTH_MASK (0x1 << 2) +#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2) +#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2) +#define BIST_TYPE_MASK (0x3 << 0) +#define BIST_TYPE_COLOR_BAR (0x0 << 0) +#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0) + +/* EXYNOS_DP_SYS_CTL_1 */ +#define DET_STA (0x1 << 2) +#define FORCE_DET (0x1 << 1) +#define DET_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_2 */ +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA (0x1 << 2) +#define FORCE_CHA (0x1 << 1) +#define CHA_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_4 */ +#define FIX_M_AUD (0x1 << 4) +#define ENHANCED (0x1 << 3) +#define FIX_M_VID (0x1 << 2) +#define M_VID_UPDATE_CTRL (0x3 << 0) + +/* EXYNOS_M_VID_X */ +#define M_VID0_CFG(x) ((x) & 0xff) +#define M_VID1_CFG(x) (((x) >> 8) & 0xff) +#define M_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* EXYNOS_M_VID_X */ +#define N_VID0_CFG(x) ((x) & 0xff) +#define N_VID1_CFG(x) (((x) >> 8) & 0xff) +#define N_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* DPCD_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0) + +/* Definition for DPCD Register */ +#define DPCD_DPCD_REV (0x0000) +#define DPCD_MAX_LINK_RATE (0x0001) +#define DPCD_MAX_LANE_COUNT (0x0002) +#define DPCD_LINK_BW_SET (0x0100) +#define DPCD_LANE_COUNT_SET (0x0101) +#define DPCD_TRAINING_PATTERN_SET (0x0102) +#define DPCD_TRAINING_LANE0_SET (0x0103) +#define DPCD_LANE0_1_STATUS (0x0202) +#define DPCD_LN_ALIGN_UPDATED (0x0204) +#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206) +#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207) +#define DPCD_TEST_REQUEST (0x0218) +#define DPCD_TEST_RESPONSE (0x0260) +#define DPCD_TEST_EDID_CHECKSUM (0x0261) +#define DPCD_SINK_POWER_STATE (0x0600) + +/* DPCD_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) + +/* DPCD_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) + +/* DPCD_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR (0x50) +#define I2C_E_EDID_DEVICE_ADDR (0x30) +#define EDID_BLOCK_LENGTH (0x80) +#define EDID_HEADER_PATTERN (0x00) +#define EDID_EXTENSION_FLAG (0x7e) +#define EDID_CHECKSUM (0x7f) + +/* DPCD_LANE0_1_STATUS */ +#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6) +#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5) +#define DPCD_LANE1_CR_DONE (0x1 << 4) +#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE0_CR_DONE (0x1 << 0) + +/* DPCD_ADJUST_REQUEST_LANE0_1 */ +#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0) + +/* DPCD_ADJUST_REQUEST_LANE2_3 */ +#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0) + +/* DPCD_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f) + +/* DPCD_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0) + +#define DPCD_REQ_ADJ_SWING (0x00) +#define DPCD_REQ_ADJ_EMPHASIS (0x01) + +#define DP_LANE_STAT_CR_DONE (0x01 << 0) +#define DP_LANE_STAT_CE_DONE (0x01 << 1) +#define DP_LANE_STAT_SYM_LOCK (0x01 << 2) + +#endif diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h new file mode 100644 index 0000000..3569498 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DP_INFO_H +#define _DP_INFO_H + +#define msleep(a) udelay(a * 1000) + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +#define EXYNOS_DP_SUCCESS 0 + +enum { + DP_DISABLE, + DP_ENABLE, +}; + +struct edp_disp_info { + char *name; + unsigned int h_total; + unsigned int h_res; + unsigned int h_sync_width; + unsigned int h_back_porch; + unsigned int h_front_porch; + unsigned int v_total; + unsigned int v_res; + unsigned int v_sync_width; + unsigned int v_back_porch; + unsigned int v_front_porch; + + unsigned int v_sync_rate; +}; + +struct edp_link_train_info { + unsigned int lt_status; + + unsigned int ep_loop; + unsigned int cr_loop[4]; + +}; + +struct edp_video_info { + unsigned int master_mode; + unsigned int bist_mode; + unsigned int bist_pattern; + + unsigned int h_sync_polarity; + unsigned int v_sync_polarity; + unsigned int interlaced; + + unsigned int color_space; + unsigned int dynamic_range; + unsigned int ycbcr_coeff; + unsigned int color_depth; +}; + +struct edp_device_info { + struct edp_disp_info disp_info; + struct edp_link_train_info lt_info; + struct edp_video_info video_info; + + /*below info get from panel during training*/ + unsigned char lane_bw; + unsigned char lane_cnt; + unsigned char dpcd_rev; + /*support enhanced frame cap */ + unsigned char dpcd_efc; +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +enum pll_status { + PLL_UNLOCKED = 0, + PLL_LOCKED +}; + +enum { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum { + VESA, + CEA +}; + +enum { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum { + DP_LANE_BW_1_62 = 0x06, + DP_LANE_BW_2_70 = 0x0a, +}; + +enum { + DP_LANE_CNT_1 = 1, + DP_LANE_CNT_2 = 2, + DP_LANE_CNT_4 = 4, +}; + +enum { + DP_DPCD_REV_10 = 0x10, + DP_DPCD_REV_11 = 0x11, +}; + +enum { + DP_LT_NONE, + DP_LT_START, + DP_LT_CR, + DP_LT_ET, + DP_LT_FINISHED, + DP_LT_FAIL, +}; + +enum { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pattern_type { + NO_PATTERN, + COLOR_RAMP, + BALCK_WHITE_V_LINES, + COLOR_SQUARE, + INVALID_PATTERN, + COLORBAR_32, + COLORBAR_64, + WHITE_GRAY_BALCKBAR_32, + WHITE_GRAY_BALCKBAR_64, + MOBILE_WHITEBAR_32, + MOBILE_WHITEBAR_64 +}; + +enum { + CALCULATED_M, + REGISTER_M +}; + +enum { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + + +struct exynos_dp_platform_data { + struct edp_device_info *edp_dev_info; + void (*phy_enable)(unsigned int); +}; + +#ifdef CONFIG_EXYNOS_DP +unsigned int exynos_init_dp(void); +#else +unsigned int exynos_init_dp(void) +{ + return 0; +} +#endif + +#endif /* _DP_INFO_H */ diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 44b7feb..a7530a4 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -29,6 +29,7 @@ COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o COBJS-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o +COBJS-$(CONFIG_EXYNOS_DP) += exynos_dp.o exynos_dp_lowlevel.o COBJS-$(CONFIG_EXYNOS_FB) += exynos_fb.o exynos_fimd.o COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c new file mode 100644 index 0000000..53e4101 --- /dev/null +++ b/drivers/video/exynos_dp.c @@ -0,0 +1,925 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <linux/err.h> +#include <asm/arch/clk.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dp_info.h> +#include <asm/arch/dp.h> + +#include "exynos_dp_lowlevel.h" + +static struct exynos_dp_platform_data *dp_pd; + +static void exynos_dp_disp_info(struct edp_disp_info *disp_info) +{ + disp_info->h_total = disp_info->h_res + disp_info->h_sync_width + + disp_info->h_back_porch + disp_info->h_front_porch; + disp_info->v_total = disp_info->v_res + disp_info->v_sync_width + + disp_info->v_back_porch + disp_info->v_front_porch; + + return; +} + +static int exynos_dp_init_dp(void) +{ + int ret; + exynos_dp_reset(); + + /* SW defined function Normal operation */ + exynos_dp_enable_sw_func(DP_ENABLE); + + ret = exynos_dp_init_analog_func(); + if (ret != EXYNOS_DP_SUCCESS) + return ret; + + exynos_dp_init_hpd(); + exynos_dp_init_aux(); + + return ret; +} + +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static unsigned int exynos_dp_read_edid(void) +{ + unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, + &extend_block); + + if (extend_block > 0) { + printf("DP EDID data includes a single extension!\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + /* Read additional EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } else { + debug("DP EDID data does not include any extensions.\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } + + debug("DP EDID Read success!\n"); + + return 0; +} + +static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) +{ + unsigned char buf[12]; + unsigned int ret; + unsigned char temp; + unsigned char retry_cnt; + unsigned char dpcd_rev[16]; + unsigned char lane_bw[16]; + unsigned char lane_cnt[16]; + + memset(dpcd_rev, 0, 16); + memset(lane_bw, 0, 16); + memset(lane_cnt, 0, 16); + memset(buf, 0, 12); + + retry_cnt = 5; + while (retry_cnt) { + /* Read DPCD 0x0000-0x000b */ + ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP read_byte_from_dpcd() failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + /* */ + temp = buf[DPCD_DPCD_REV]; + if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) + edp_info->dpcd_rev = temp; + else { + printf("DP Wrong DPCD Rev : %x\n", temp); + return -ENODEV; + } + + temp = buf[DPCD_MAX_LINK_RATE]; + if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) + edp_info->lane_bw = temp; + else { + printf("DP Wrong MAX LINK RATE : %x\n", temp); + return -EINVAL; + } + + /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ + if (edp_info->dpcd_rev == DP_DPCD_REV_11) { + temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; + if (buf[DPCD_MAX_LANE_COUNT] & 0x80) + edp_info->dpcd_efc = 1; + else + edp_info->dpcd_efc = 0; + } else { + temp = buf[DPCD_MAX_LANE_COUNT]; + edp_info->dpcd_efc = 0; + } + + if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || + temp == DP_LANE_CNT_4) { + edp_info->lane_cnt = temp; + } else { + printf("DP Wrong MAX LANE COUNT : %x\n", temp); + return -EINVAL; + } + + ret = exynos_dp_read_edid(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP exynos_dp_read_edid() failed\n"); + return -EINVAL; + } + + return ret; +} + +static void exynos_dp_init_training(void) +{ + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + exynos_dp_reset_macro(); + + /* All DP analog module power up */ + exynos_dp_set_analog_power_down(POWER_ALL, 0); +} + +static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) +{ + unsigned char buf[5]; + unsigned int ret = 0; + + debug("DP: %s was called\n", __func__); + + edp_info->lt_info.lt_status = DP_LT_CR; + edp_info->lt_info.ep_loop = 0; + edp_info->lt_info.cr_loop[0] = 0; + edp_info->lt_info.cr_loop[1] = 0; + edp_info->lt_info.cr_loop[2] = 0; + edp_info->lt_info.cr_loop[3] = 0; + + /* Set sink to D0 (Sink Not Ready) mode. */ + ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, + DPCD_SET_POWER_STATE_D0); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + /* Set link rate and count as you want to establish*/ + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + /* Setup RX configuration */ + buf[0] = edp_info->lane_bw; + buf[1] = edp_info->lane_cnt; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, + edp_info->lane_cnt); + + /* Set training pattern 1 */ + exynos_dp_set_training_pattern(TRAINING_PTN1); + + /* Set RX training pattern */ + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; + + buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, + 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + return ret; +} + +static unsigned int exynos_dp_training_pattern_dis(void) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + + exynos_dp_set_training_pattern(DP_NONE); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + DPCD_TRAINING_PATTERN_DISABLED); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP requst_link_traninig_req failed\n"); + return -EAGAIN; + } + + return ret; +} + +static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) +{ + unsigned char data; + unsigned int ret = EXYNOS_DP_SUCCESS; + + ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, + &data); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read_from_dpcd failed\n"); + return -EAGAIN; + } + + if (enable) + data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); + else + data = DPCD_LN_COUNT_SET(data); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, + data); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_to_dpcd failed\n"); + return -EAGAIN; + + } + + return ret; +} + +static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + + ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP rx_enhance_mode failed\n"); + return -EAGAIN; + } + + exynos_dp_enable_enhanced_mode(enhance_mode); + + return ret; +} + +static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, + unsigned char *status) +{ + unsigned int ret, i; + unsigned char buf[2]; + unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; + unsigned char shift_val[DP_LANE_CNT_4] = {0,}; + + shift_val[0] = 0; + shift_val[1] = 4; + shift_val[2] = 0; + shift_val[3] = 4; + + ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + return ret; + } + + for (i = 0; i < edp_info->lane_cnt; i++) { + lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; + if (lane_stat[0] != lane_stat[i]) { + printf("Wrong lane status\n"); + return -EINVAL; + } + } + + *status = lane_stat[0]; + + return ret; +} + +static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, + unsigned char *sw, unsigned char *em) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char buf; + unsigned int dpcd_addr; + unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4}; + + /*lane_num value is used as arry index, so this range 0 ~ 3 */ + dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); + + ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adjust request failed\n"); + return -EAGAIN; + } + + *sw = ((buf >> shift_val[lane_num]) & 0x03); + *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; + + return ret; +} + +static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) +{ + int ret; + + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP training_patter_disable() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP set_enhanced_mode() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) +{ + int ret; + + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + edp_info->lane_bw = DP_LANE_BW_1_62; + printf("DP Change lane bw to 1.62Gbps\n"); + edp_info->lt_info.lt_status = DP_LT_START; + ret = EXYNOS_DP_SUCCESS; + } else { + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP training_patter_disable() failed\n"); + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP set_enhanced_mode() failed\n"); + + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info + *edp_info) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char lane_stat; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; + unsigned int i; + unsigned char adj_req_sw; + unsigned char adj_req_em; + unsigned char buf[5]; + + debug("DP: %s was called\n", __func__); + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + debug("DP clock Recovery training succeed\n"); + exynos_dp_set_training_pattern(TRAINING_PTN2); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, + &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) + || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; + buf[1] = lt_ctl_val[0]; + buf[2] = lt_ctl_val[1]; + buf[3] = lt_ctl_val[2]; + buf[4] = lt_ctl_val[3]; + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_PATTERN_SET, 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write traning pattern1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } else + edp_info->lt_info.lt_status = DP_LT_ET; + } else { + for (i = 0; i < edp_info->lane_cnt; i++) { + lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adj req failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) + ret = exynos_dp_reduce_link_rate(edp_info); + + if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == + adj_req_sw) && + (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == + adj_req_em)) { + edp_info->lt_info.cr_loop[i]++; + if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) + ret = exynos_dp_reduce_link_rate( + edp_info); + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write traning pattern2 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + } + + return ret; +} + +static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info + *edp_info) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char lane_stat, adj_req_sw, adj_req_em, i; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; + unsigned char interlane_aligned = 0; + unsigned char f_bw; + unsigned char f_lane_cnt; + unsigned char sink_stat; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + debug("DP lane stat : %x\n", lane_stat); + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, + &sink_stat); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adj req 1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; + lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; + } + } + + if (((lane_stat&DP_LANE_STAT_CE_DONE) && + (lane_stat&DP_LANE_STAT_SYM_LOCK)) + && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { + debug("DP Equalizer training succeed\n"); + + f_bw = exynos_dp_get_link_bandwidth(); + f_lane_cnt = exynos_dp_get_lane_count(); + + debug("DP final BandWidth : %x\n", f_bw); + debug("DP final Lane Count : %x\n", f_lane_cnt); + + edp_info->lt_info.lt_status = DP_LT_FINISHED; + + exynos_dp_equalizer_err_link(edp_info); + + } else { + edp_info->lt_info.ep_loop++; + + if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate( + edp_info); + } else { + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } else { + for (i = 0; i < edp_info->lane_cnt; i++) + exynos_dp_set_lanex_pre_emphasis( + lt_ctl_val[i], i); + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, + 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP set lt pattern failed\n"); + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } + } + } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate(edp_info); + } else { + edp_info->lt_info.lt_status = DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + + return ret; +} + +static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + int training_finished; + + /* Turn off unnecessary lane */ + if (edp_info->lane_cnt == 1) + exynos_dp_set_analog_power_down(CH1_BLOCK, 1); + + training_finished = 0; + + edp_info->lt_info.lt_status = DP_LT_START; + + /* Process here */ + while (!training_finished) { + switch (edp_info->lt_info.lt_status) { + case DP_LT_START: + ret = exynos_dp_link_start(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:link start failed\n"); + return ret; + } + break; + case DP_LT_CR: + ret = exynos_dp_process_clock_recovery(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:clock recovery failed\n"); + return ret; + } + break; + case DP_LT_ET: + ret = exynos_dp_process_equalizer_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:equalizer training failed\n"); + return ret; + } + break; + case DP_LT_FINISHED: + training_finished = 1; + break; + case DP_LT_FAIL: + return -1; + } + } + + return ret; +} + +static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) +{ + unsigned int ret; + + exynos_dp_init_training(); + + ret = exynos_dp_sw_link_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP dp_sw_link_traning() failed\n"); + + return ret; +} + +static void exynos_dp_enable_scramble(unsigned int enable) +{ + unsigned char data; + + if (enable) { + exynos_dp_enable_scrambling(DP_ENABLE); + + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); + } else { + exynos_dp_enable_scrambling(DP_DISABLE); + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data | DPCD_SCRAMBLING_DISABLED)); + } +} + +static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + unsigned int retry_cnt; + + mdelay(1); + + if (edp_info->video_info.master_mode) { + printf("DP does not support master mode\n"); + return -ENODEV; + } else { + /* debug slave */ + exynos_dp_config_video_slave_mode(&edp_info->video_info); + } + + exynos_dp_set_video_color_format(&edp_info->video_info); + + if (edp_info->video_info.bist_mode) { + if (exynos_dp_config_video_bist(edp_info) != 0) + return -1; + } + + ret = exynos_dp_get_pll_lock_status(); + if (ret != PLL_LOCKED) { + printf("DP PLL is not locked yet\n"); + return -EIO; + } + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 10; + while (retry_cnt) { + ret = exynos_dp_is_slave_video_stream_clock_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP stream_clock_on failed\n"); + return ret; + } + retry_cnt--; + mdelay(1); + } else + break; + } + } + + /* Set to use the register calculated M/N video */ + exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register */ + exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); + + /* Enable video bist */ + if (edp_info->video_info.bist_pattern != COLOR_RAMP && + edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES && + edp_info->video_info.bist_pattern != COLOR_SQUARE) + exynos_dp_enable_video_bist(edp_info->video_info.bist_mode); + else + exynos_dp_enable_video_bist(DP_DISABLE); + + /* Disable video mute */ + exynos_dp_enable_video_mute(DP_DISABLE); + + /* Configure video Master or Slave mode */ + exynos_dp_enable_video_master(edp_info->video_info.master_mode); + + /* Enable video */ + exynos_dp_start_video(); + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 100; + while (retry_cnt) { + ret = exynos_dp_is_video_stream_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Timeout of video stream\n"); + return ret; + } + retry_cnt--; + mdelay(5); + } else + break; + } + } + + return ret; +} + +unsigned int exynos_init_dp(void) +{ + unsigned int ret; + struct edp_device_info *edp_info; + struct edp_disp_info disp_info; + + edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL); + if (!edp_info) { + debug("failed to allocate edp device object.\n"); + return -EFAULT; + } + + edp_info = dp_pd->edp_dev_info; + if (edp_info == NULL) { + debug("failed to get edp_info data.\n"); + return -EFAULT; + } + disp_info = edp_info->disp_info; + + exynos_dp_disp_info(&edp_info->disp_info); + + if (dp_pd->phy_enable) + dp_pd->phy_enable(1); + + ret = exynos_dp_init_dp(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP exynos_dp_init_dp() failed\n"); + return ret; + } + + ret = exynos_dp_handle_edid(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("EDP handle_edid fail\n"); + return ret; + } + + ret = exynos_dp_set_link_train(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP link training fail\n"); + return ret; + } + + exynos_dp_enable_scramble(DP_ENABLE); + exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); + exynos_dp_enable_enhanced_mode(DP_ENABLE); + + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + exynos_dp_init_video(); + ret = exynos_dp_config_video(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("Exynos DP init failed\n"); + return ret; + } + + printf("Exynos DP init done\n"); + + return ret; +} + +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd) +{ + if (pd == NULL) { + debug("pd is NULL\n"); + return; + } + + dp_pd = pd; +} diff --git a/drivers/video/exynos_dp_lowlevel.c b/drivers/video/exynos_dp_lowlevel.c new file mode 100644 index 0000000..7b54c80 --- /dev/null +++ b/drivers/video/exynos_dp_lowlevel.c @@ -0,0 +1,1291 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <linux/err.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dp_info.h> +#include <asm/arch/dp.h> + +static void exynos_dp_enable_video_input(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl1); + reg &= ~VIDEO_EN_MASK; + + /* enable video input*/ + if (enable) + reg |= VIDEO_EN_MASK; + + writel(reg, &dp_regs->video_ctl1); + + return; +} + +void exynos_dp_enable_video_bist(unsigned int enable) +{ + /*enable video bist*/ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl4); + reg &= ~VIDEO_BIST_MASK; + + /*enable video bist*/ + if (enable) + reg |= VIDEO_BIST_MASK; + + writel(reg, &dp_regs->video_ctl4); + + return; +} + +void exynos_dp_enable_video_mute(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl1); + reg &= ~(VIDEO_MUTE_MASK); + if (enable) + reg |= VIDEO_MUTE_MASK; + + writel(reg, &dp_regs->video_ctl1); + + return; +} + + +static void exynos_dp_init_analog_param(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* + * Set termination + * Normal bandgap, Normal swing, Tx terminal registor 61 ohm + * 24M Phy clock, TX digital logic power is 100:1.0625V + */ + reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM | + SWING_A_30PER_G_NORMAL; + writel(reg, &dp_regs->analog_ctl1); + + reg = SEL_24M | TX_DVDD_BIT_1_0625V; + writel(reg, &dp_regs->analog_ctl2); + + /* + * Set power source for internal clk driver to 1.0625v. + * Select current reference of TX driver current to 00:Ipp/2+Ic/2. + * Set VCO range of PLL +- 0uA + */ + reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO; + writel(reg, &dp_regs->analog_ctl3); + + /* + * Set AUX TX terminal resistor to 102 ohm + * Set AUX channel amplitude control + */ + reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA; + writel(reg, &dp_regs->pll_filter_ctl1); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.2500V + */ + reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV; + + writel(reg, &dp_regs->amp_tuning_ctl); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.1250V + */ + reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V; + writel(reg, &dp_regs->pll_ctl); +} + +static void exynos_dp_init_interrupt(void) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + /* Set interrupt registers to initial states */ + + /* + * Disable interrupt + * INT pin assertion polarity. It must be configured + * correctly according to ICU setting. + * 1 = assert high, 0 = assert low + */ + writel(INT_POL, &dp_regs->int_ctl); + + /* Clear pending regisers */ + writel(0xff, &dp_regs->common_int_sta1); + writel(0xff, &dp_regs->common_int_sta2); + writel(0xff, &dp_regs->common_int_sta3); + writel(0xff, &dp_regs->common_int_sta4); + writel(0xff, &dp_regs->int_sta); + + /* 0:mask,1: unmask */ + writel(0x00, &dp_regs->int_sta_mask1); + writel(0x00, &dp_regs->int_sta_mask2); + writel(0x00, &dp_regs->int_sta_mask3); + writel(0x00, &dp_regs->int_sta_mask4); + writel(0x00, &dp_regs->int_sta_mask); +} + +void exynos_dp_reset(void) +{ + unsigned int reg_func_1; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /*dp tx sw reset*/ + writel(RESET_DP_TX, &dp_regs->tx_sw_reset); + + exynos_dp_enable_video_input(DP_DISABLE); + exynos_dp_enable_video_bist(DP_DISABLE); + exynos_dp_enable_video_mute(DP_DISABLE); + + /* software reset */ + reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | + HDCP_FUNC_EN_N | SW_FUNC_EN_N; + + writel(reg_func_1, &dp_regs->func_en1); + writel(reg_func_1, &dp_regs->func_en2); + + mdelay(1); + + exynos_dp_init_analog_param(); + exynos_dp_init_interrupt(); + + return; +} + +void exynos_dp_enable_sw_func(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->func_en1); + reg &= ~(SW_FUNC_EN_N); + + if (!enable) + reg |= SW_FUNC_EN_N; + + writel(reg, &dp_regs->func_en1); + + return; +} + +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->phy_pd); + switch (block) { + case AUX_BLOCK: + reg &= ~(AUX_PD); + if (enable) + reg |= AUX_PD; + break; + case CH0_BLOCK: + reg &= ~(CH0_PD); + if (enable) + reg |= CH0_PD; + break; + case CH1_BLOCK: + reg &= ~(CH1_PD); + if (enable) + reg |= CH1_PD; + break; + case CH2_BLOCK: + reg &= ~(CH2_PD); + if (enable) + reg |= CH2_PD; + break; + case CH3_BLOCK: + reg &= ~(CH3_PD); + if (enable) + reg |= CH3_PD; + break; + case ANALOG_TOTAL: + reg &= ~PHY_PD; + if (enable) + reg |= PHY_PD; + break; + case POWER_ALL: + reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD | + CH3_PD); + if (enable) + reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD | + CH2_PD | CH3_PD); + break; + default: + printf("DP undefined block number : %d\n", block); + return -1; + } + + writel(reg, &dp_regs->phy_pd); + + return 0; +} + +unsigned int exynos_dp_get_pll_lock_status(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->debug_ctl); + + if (reg & PLL_LOCK) + return PLL_LOCKED; + else + return PLL_UNLOCKED; +} + +static void exynos_dp_set_pll_power(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_PD); + + if (!enable) + reg |= DP_PLL_PD; + + writel(reg, &dp_regs->pll_ctl); +} + +int exynos_dp_init_analog_func(void) +{ + int ret = EXYNOS_DP_SUCCESS; + unsigned int retry_cnt = 10; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /*Power On All Analog block */ + exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE); + + reg = PLL_LOCK_CHG; + writel(reg, &dp_regs->common_int_sta1); + + reg = readl(&dp_regs->debug_ctl); + reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); + writel(reg, &dp_regs->debug_ctl); + + /*Assert DP PLL Reset*/ + reg = readl(&dp_regs->pll_ctl); + reg |= DP_PLL_RESET; + writel(reg, &dp_regs->pll_ctl); + + mdelay(1); + + /*Deassert DP PLL Reset*/ + reg = readl(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_RESET); + writel(reg, &dp_regs->pll_ctl); + + exynos_dp_set_pll_power(DP_ENABLE); + + while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) { + mdelay(1); + retry_cnt--; + if (retry_cnt == 0) { + printf("DP dp's pll lock failed : retry : %d\n", + retry_cnt); + return -EINVAL; + } + } + + debug("dp's pll lock success(%d)\n", retry_cnt); + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + reg = readl(&dp_regs->func_en2); + reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N + | AUX_FUNC_EN_N); + writel(reg, &dp_regs->func_en2); + + return ret; +} + +void exynos_dp_init_hpd(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear interrupts releated to Hot Plug Dectect */ + reg = HOTPLUG_CHG | HPD_LOST | PLUG; + writel(reg, &dp_regs->common_int_sta4); + + reg = INT_HPD; + writel(reg, &dp_regs->int_sta); + + reg = readl(&dp_regs->sys_ctl3); + reg &= ~(F_HPD | HPD_CTRL); + writel(reg, &dp_regs->sys_ctl3); + + return; +} + +static inline void exynos_dp_reset_aux(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Disable AUX channel module */ + reg = readl(&dp_regs->func_en2); + reg |= AUX_FUNC_EN_N; + writel(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_init_aux(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear inerrupts related to AUX channel */ + reg = RPLY_RECEIV | AUX_ERR; + writel(reg, &dp_regs->int_sta); + + exynos_dp_reset_aux(); + + /* Disable AUX transaction H/W retry */ + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)| + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + writel(reg, &dp_regs->aux_hw_retry_ctl); + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + reg = DEFER_CTRL_EN | DEFER_COUNT(1); + writel(reg, &dp_regs->aux_ch_defer_ctl); + + /* Enable AUX channel module */ + reg = readl(&dp_regs->func_en2); + reg &= ~AUX_FUNC_EN_N; + writel(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_config_interrupt(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* 0: mask, 1: unmask */ + reg = COMMON_INT_MASK_1; + writel(reg, &dp_regs->common_int_mask1); + + reg = COMMON_INT_MASK_2; + writel(reg, &dp_regs->common_int_mask2); + + reg = COMMON_INT_MASK_3; + writel(reg, &dp_regs->common_int_mask3); + + reg = COMMON_INT_MASK_4; + writel(reg, &dp_regs->common_int_mask4); + + reg = INT_STA_MASK; + writel(reg, &dp_regs->int_sta_mask); + + return; +} + +unsigned int exynos_dp_get_plug_in_status(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->sys_ctl3); + if (reg & HPD_STATUS) + return 0; + + return -1; +} + +unsigned int exynos_dp_detect_hpd(void) +{ + int timeout_loop = DP_TIMEOUT_LOOP_COUNT; + + mdelay(2); + + while (exynos_dp_get_plug_in_status() != 0) { + if (timeout_loop == 0) + return -EINVAL; + mdelay(10); + timeout_loop--; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_start_aux_transaction(void) +{ + unsigned int reg; + unsigned int ret = 0; + unsigned int retry_cnt; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Enable AUX CH operation */ + reg = readl(&dp_regs->aux_ch_ctl2); + reg |= AUX_EN; + writel(reg, &dp_regs->aux_ch_ctl2); + + retry_cnt = 10; + while (retry_cnt) { + reg = readl(&dp_regs->int_sta); + if (!(reg & RPLY_RECEIV)) { + if (retry_cnt == 0) { + printf("DP Reply Timeout!!\n"); + ret = -EAGAIN; + return ret; + } + mdelay(1); + retry_cnt--; + } else + break; + } + + /* Clear interrupt source for AUX CH command reply */ + writel(reg, &dp_regs->int_sta); + + /* Clear interrupt source for AUX CH access error */ + reg = readl(&dp_regs->int_sta); + if (reg & AUX_ERR) { + printf("DP Aux Access Error\n"); + writel(AUX_ERR, &dp_regs->int_sta); + ret = -EAGAIN; + return ret; + } + + /* Check AUX CH error access status */ + reg = readl(&dp_regs->aux_ch_sta); + if ((reg & AUX_STATUS_MASK) != 0) { + debug("DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK); + ret = -EAGAIN; + return ret; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr, + unsigned char data) +{ + unsigned int reg, ret; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + writel(reg, &dp_regs->aux_addr_19_16); + + /* Write data buffer */ + reg = (unsigned int)data; + writel(reg, &dp_regs->buf_data0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP Aux transaction failed\n"); + return ret; + } + + return ret; +} + +unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr, + unsigned char *data) +{ + unsigned int reg; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + writel(reg, &dp_regs->aux_addr_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (!retval) + debug("DP Aux Transaction fail!\n"); + + /* Read data buffer */ + reg = readl(&dp_regs->buf_data0); + *data = (unsigned char)(reg & 0xff); + + return retval; +} + +unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]) +{ + unsigned int reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_19_16); + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = data[start_offset + cur_data_idx]; + writel(reg, (unsigned int)&dp_regs->buf_data0 + + (4 * cur_data_idx)); + } + /* + * Set DisplayPort transaction and write + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + start_offset += cur_data_count; + } + + return ret; +} + +unsigned int exynos_dp_read_bytes_from_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]) +{ + unsigned int reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_19_16); + /* + * Set DisplayPort transaction and read + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = readl((unsigned int)&dp_regs->buf_data0 + + 4 * cur_data_idx); + data[start_offset + cur_data_idx] = (unsigned char)reg; + } + + start_offset += cur_data_count; + } + + return ret; +} + +int exynos_dp_select_i2c_device(unsigned int device_addr, + unsigned int reg_addr) +{ + unsigned int reg; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Set EDID device address */ + reg = device_addr; + writel(reg, &dp_regs->aux_addr_7_0); + writel(0x0, &dp_regs->aux_addr_15_8); + writel(0x0, &dp_regs->aux_addr_19_16); + + /* Set offset from base address of EDID device */ + writel(reg_addr, &dp_regs->buf_data0); + + /* + * Set I2C transaction and write address + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | + AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != 0) + printf("%s: DP Aux Transaction fail!\n", __func__); + + return retval; +} + +int exynos_dp_read_byte_from_i2c(unsigned int device_addr, + unsigned int reg_addr, + unsigned int *data) +{ + unsigned int reg; + int i; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select EDID device */ + retval = exynos_dp_select_i2c_device(device_addr, reg_addr); + if (retval != 0) { + printf("DP Select EDID device fail. retry !\n"); + continue; + } + + /* + * Set I2C transaction and read data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printf("%s: DP Aux Transaction fail!\n", __func__); + } + + /* Read data */ + if (retval == 0) + *data = readl(&dp_regs->buf_data0); + + return retval; +} + +int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int count, unsigned char edid[]) +{ + unsigned int reg; + unsigned int i, j; + unsigned int cur_data_idx; + unsigned int defer = 0; + int retval = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + for (i = 0; i < count; i += 16) { /* use 16 burst */ + for (j = 0; j < 100; j++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Set normal AUX CH command */ + reg = readl(&dp_regs->aux_ch_ctl2); + reg &= ~ADDR_ONLY; + writel(reg, &dp_regs->aux_ch_ctl2); + + /* + * If Rx sends defer, Tx sends only reads + * request without sending addres + */ + if (!defer) + retval = + exynos_dp_select_i2c_device(device_addr, + reg_addr + i); + else + defer = 0; + + if (retval == EXYNOS_DP_SUCCESS) { + /* + * Set I2C transaction and write data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(16) | + AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval == 0) + break; + else + printf("DP Aux Transaction fail!\n"); + } + /* Check if Rx sends defer */ + reg = readl(&dp_regs->aux_rx_comm); + if (reg == AUX_RX_COMM_AUX_DEFER || + reg == AUX_RX_COMM_I2C_DEFER) { + printf("DP Defer: %d\n\n", reg); + defer = 1; + } + } + + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { + reg = readl((unsigned int)&dp_regs->buf_data0 + + 4 * cur_data_idx); + edid[i + cur_data_idx] = (unsigned char)reg; + } + } + + return retval; +} + +void exynos_dp_reset_macro(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->phy_test); + reg |= MACRO_RST; + writel(reg, &dp_regs->phy_test); + + /* 10 us is the minimum Macro reset time. */ + mdelay(1); + + reg &= ~MACRO_RST; + writel(reg, &dp_regs->phy_test); +} + +void exynos_dp_set_link_bandwidth(unsigned char bwtype) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = (unsigned int)bwtype; + + /* Set bandwidth to 2.7G or 1.62G */ + if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70)) + writel(reg, &dp_regs->link_bw_set); +} + +unsigned char exynos_dp_get_link_bandwidth(void) +{ + unsigned char ret; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->link_bw_set); + ret = (unsigned char)reg; + + return ret; +} + +void exynos_dp_set_lane_count(unsigned char count) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = (unsigned int)count; + + if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) || + (count == DP_LANE_CNT_4)) + writel(reg, &dp_regs->lane_count_set); +} + +unsigned int exynos_dp_get_lane_count(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->lane_count_set); + + return reg; +} + +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + + return readl(reg_list[lanecnt]); +} + +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + + writel(request_val, reg_list[lanecnt]); +} + +void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) +{ + unsigned char i; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + unsigned int reg_shift[DP_LANE_CNT_4] = { + PRE_EMPHASIS_SET_0_SHIFT, + PRE_EMPHASIS_SET_1_SHIFT, + PRE_EMPHASIS_SET_2_SHIFT, + PRE_EMPHASIS_SET_3_SHIFT + }; + + for (i = 0; i < lanecnt; i++) { + reg = level << reg_shift[i]; + writel(reg, reg_list[i]); + } +} + +void exynos_dp_set_training_pattern(unsigned int pattern) +{ + unsigned int reg = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + switch (pattern) { + case PRBS7: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; + break; + case D10_2: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; + break; + case TRAINING_PTN1: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; + break; + case TRAINING_PTN2: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; + break; + case DP_NONE: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE | + SW_TRAINING_PATTERN_SET_NORMAL; + break; + default: + break; + } + + writel(reg, &dp_regs->training_ptn_set); +} + +void exynos_dp_enable_enhanced_mode(unsigned char enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->sys_ctl4); + reg &= ~ENHANCED; + + if (enable) + reg |= ENHANCED; + + writel(reg, &dp_regs->sys_ctl4); +} + +void exynos_dp_enable_scrambling(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->training_ptn_set); + reg &= ~(SCRAMBLING_DISABLE); + + if (!enable) + reg |= SCRAMBLING_DISABLE; + + writel(reg, &dp_regs->training_ptn_set); +} + +int exynos_dp_init_video(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + writel(reg, &dp_regs->common_int_sta1); + + /* I_STRM__CLK detect : DE_CTL : Auto detect */ + reg &= ~DET_CTRL; + writel(reg, &dp_regs->sys_ctl1); + + return 0; +} + +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Video Slave mode setting */ + reg = readl(&dp_regs->func_en1); + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); + reg |= MASTER_VID_FUNC_EN_N; + writel(reg, &dp_regs->func_en1); + + /* Configure Interlaced for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~INTERACE_SCAN_CFG; + reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /* Configure V sync polarity for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~VSYNC_POLARITY_CFG; + reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /* Configure H sync polarity for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~HSYNC_POLARITY_CFG; + reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /*Set video mode to slave mode */ + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; + writel(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_set_video_color_format(struct edp_video_info *video_info) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Configure the input color depth, color space, dynamic range */ + reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | + (video_info->color_depth << IN_BPC_SHIFT) | + (video_info->color_space << IN_COLOR_F_SHIFT); + writel(reg, &dp_regs->video_ctl2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + reg = readl(&dp_regs->video_ctl3); + reg &= ~IN_YC_COEFFI_MASK; + if (video_info->ycbcr_coeff) + reg |= IN_YC_COEFFI_ITU709; + else + reg |= IN_YC_COEFFI_ITU601; + writel(reg, &dp_regs->video_ctl3); +} + +int exynos_dp_config_video_bist(struct edp_device_info *edp_info) +{ + unsigned int reg; + unsigned int bist_type = 0; + struct edp_video_info video_info = edp_info->video_info; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* For master mode, you don't need to set the video format */ + if (video_info.master_mode == 0) { + writel(TOTAL_LINE_CFG_L(edp_info->disp_info.v_total), + &dp_regs->total_ln_cfg_l); + writel(TOTAL_LINE_CFG_H(edp_info->disp_info.v_total), + &dp_regs->total_ln_cfg_h); + writel(ACTIVE_LINE_CFG_L(edp_info->disp_info.v_res), + &dp_regs->active_ln_cfg_l); + writel(ACTIVE_LINE_CFG_H(edp_info->disp_info.v_res), + &dp_regs->active_ln_cfg_h); + writel(edp_info->disp_info.v_sync_width, + &dp_regs->vsw_cfg); + writel(edp_info->disp_info.v_back_porch, + &dp_regs->vbp_cfg); + writel(edp_info->disp_info.v_front_porch, + &dp_regs->vfp_cfg); + + writel(TOTAL_PIXEL_CFG_L(edp_info->disp_info.h_total), + &dp_regs->total_pix_cfg_l); + writel(TOTAL_PIXEL_CFG_H(edp_info->disp_info.h_total), + &dp_regs->total_pix_cfg_h); + writel(ACTIVE_PIXEL_CFG_L(edp_info->disp_info.h_res), + &dp_regs->active_pix_cfg_l); + writel(ACTIVE_PIXEL_CFG_H(edp_info->disp_info.h_res), + &dp_regs->active_pix_cfg_h); + writel(H_F_PORCH_CFG_L(edp_info->disp_info.h_front_porch), + &dp_regs->hfp_cfg_l); + writel(H_F_PORCH_CFG_H(edp_info->disp_info.h_front_porch), + &dp_regs->hfp_cfg_h); + writel(H_SYNC_PORCH_CFG_L(edp_info->disp_info.h_sync_width), + &dp_regs->hsw_cfg_l); + writel(H_SYNC_PORCH_CFG_H(edp_info->disp_info.h_sync_width), + &dp_regs->hsw_cfg_h); + writel(H_B_PORCH_CFG_L(edp_info->disp_info.h_back_porch), + &dp_regs->hbp_cfg_l); + writel(H_B_PORCH_CFG_H(edp_info->disp_info.h_back_porch), + &dp_regs->hbp_cfg_h); + + /* + * Set SLAVE_I_SCAN_CFG[2], VSYNC_P_CFG[1], + * HSYNC_P_CFG[0] properly + */ + reg = (video_info.interlaced << INTERACE_SCAN_CFG_SHIFT | + video_info.v_sync_polarity << V_S_POLARITY_CFG_SHIFT | + video_info.h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + } + + /* BIST color bar width set--set to each bar is 32 pixel width */ + switch (video_info.bist_pattern) { + case COLORBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_COLOR_BAR; + break; + case COLORBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_COLOR_BAR; + break; + case WHITE_GRAY_BALCKBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_WHITE_GRAY_BLACK_BAR; + break; + case WHITE_GRAY_BALCKBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_WHITE_GRAY_BLACK_BAR; + break; + case MOBILE_WHITEBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_MOBILE_WHITE_BAR; + break; + case MOBILE_WHITEBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_MOBILE_WHITE_BAR; + break; + default: + return -1; + } + + reg = bist_type; + writel(reg, &dp_regs->video_ctl4); + + return 0; +} + +unsigned int exynos_dp_is_slave_video_stream_clock_on(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Update Video stream clk detect status */ + reg = readl(&dp_regs->sys_ctl1); + writel(reg, &dp_regs->sys_ctl1); + + reg = readl(&dp_regs->sys_ctl1); + + if (!(reg & DET_STA)) { + debug("DP Input stream clock not detected.\n"); + return -EIO; + } + + return EXYNOS_DP_SUCCESS; +} + +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + if (type == REGISTER_M) { + reg = readl(&dp_regs->sys_ctl4); + reg |= FIX_M_VID; + writel(reg, &dp_regs->sys_ctl4); + reg = M_VID0_CFG(m_value); + writel(reg, &dp_regs->m_vid0); + reg = M_VID1_CFG(m_value); + writel(reg, &dp_regs->m_vid1); + reg = M_VID2_CFG(m_value); + writel(reg, &dp_regs->m_vid2); + + reg = N_VID0_CFG(n_value); + writel(reg, &dp_regs->n_vid0); + reg = N_VID1_CFG(n_value); + writel(reg, &dp_regs->n_vid1); + reg = N_VID2_CFG(n_value); + writel(reg, &dp_regs->n_vid2); + } else { + reg = readl(&dp_regs->sys_ctl4); + reg &= ~FIX_M_VID; + writel(reg, &dp_regs->sys_ctl4); + } +} + +void exynos_dp_set_video_timing_mode(unsigned int type) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl10); + reg &= ~FORMAT_SEL; + + if (type != VIDEO_TIMING_FROM_CAPTURE) + reg |= FORMAT_SEL; + + writel(reg, &dp_regs->video_ctl10); +} + +void exynos_dp_enable_video_master(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->soc_general_ctl); + if (enable) { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; + } else { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MODE_SLAVE_MODE; + } + + writel(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_start_video(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Enable Video input and disable Mute */ + reg = readl(&dp_regs->video_ctl1); + reg |= VIDEO_EN; + writel(reg, &dp_regs->video_ctl1); +} + +unsigned int exynos_dp_is_video_stream_on(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Update STRM_VALID */ + reg = readl(&dp_regs->sys_ctl3); + writel(reg, &dp_regs->sys_ctl3); + + reg = readl(&dp_regs->sys_ctl3); + if (!(reg & STRM_VALID)) + return -EIO; + + return EXYNOS_DP_SUCCESS; +} diff --git a/drivers/video/exynos_dp_lowlevel.h b/drivers/video/exynos_dp_lowlevel.h new file mode 100644 index 0000000..a041a7a --- /dev/null +++ b/drivers/video/exynos_dp_lowlevel.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee(a)samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EXYNOS_EDP_LOWLEVEL_H +#define _EXYNOS_EDP_LOWLEVEL_H + +void exynos_dp_enable_video_bist(unsigned int enable); +void exynos_dp_enable_video_mute(unsigned int enable); +void exynos_dp_reset(void); +void exynos_dp_enable_sw_func(unsigned int enable); +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable); +unsigned int exynos_dp_get_pll_lock_status(void); +int exynos_dp_init_analog_func(void); +void exynos_dp_init_hpd(void); +void exynos_dp_init_aux(void); +void exynos_dp_config_interrupt(void); +unsigned int exynos_dp_get_plug_in_status(void); +unsigned int exynos_dp_detect_hpd(void); +unsigned int exynos_dp_start_aux_transaction(void); +unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr, + unsigned char data); +unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr, + unsigned char *data); +unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +unsigned int exynos_dp_read_bytes_from_dpcd( unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +int exynos_dp_select_i2c_device( unsigned int device_addr, + unsigned int reg_addr); +int exynos_dp_read_byte_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int *data); +int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int count, + unsigned char edid[]); +void exynos_dp_reset_macro(void); +void exynos_dp_set_link_bandwidth(unsigned char bwtype); +unsigned char exynos_dp_get_link_bandwidth(void); +void exynos_dp_set_lane_count(unsigned char count); +unsigned int exynos_dp_get_lane_count(void); +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt); +void exynos_dp_set_lane_pre_emphasis(unsigned int level, + unsigned char lanecnt); +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt); +void exynos_dp_set_training_pattern(unsigned int pattern); +void exynos_dp_enable_enhanced_mode(unsigned char enable); +void exynos_dp_enable_scrambling(unsigned int enable); +int exynos_dp_init_video(void); +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info); +void exynos_dp_set_video_color_format(struct edp_video_info *video_info); +int exynos_dp_config_video_bist(struct edp_device_info *edp_info); +unsigned int exynos_dp_is_slave_video_stream_clock_on(void); +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value); +void exynos_dp_set_video_timing_mode(unsigned int type); +void exynos_dp_enable_video_master(unsigned int enable); +void exynos_dp_start_video(void); +unsigned int exynos_dp_is_video_stream_on(void); + +#endif /* _EXYNOS_DP_LOWLEVEL_H */ -- 1.7.4.1

1 0

[U-Boot] [PATCH 4/8] EXYNOS5: add display port base address
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch add display port base address for EXYNOS5. In case of EXYNOS4, use DEVICE_NOT_AVAILABLE macro because DP is not supported. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/include/asm/arch-exynos/cpu.h | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 76ef776..0068bb5 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -57,6 +57,7 @@ #define EXYNOS4_USBPHY_CONTROL 0x10020704 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ #define EXYNOS5_GPIO_PART4_BASE 0x03860000 @@ -83,6 +84,7 @@ #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 +#define EXYNOS5_DP_BASE 0x145B0000 #define EXYNOS5_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5_MODEM_BASE DEVICE_NOT_AVAILABLE @@ -150,6 +152,7 @@ static inline unsigned int samsung_get_base_##device(void) \ SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) -- 1.7.4.1

1 0

[U-Boot] [PATCH 3/8] EXYNOS5: support display port phy control function
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch support display port phy control function. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/cpu/armv7/exynos/power.c | 21 +++++++++++++++++++++ arch/arm/include/asm/arch-exynos/power.h | 5 +++++ 2 files changed, 26 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 4116781..d4bce6d 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -74,3 +74,24 @@ void set_usbhost_phy_ctrl(unsigned int enable) if (cpu_is_exynos5()) exynos5_set_usbhost_phy_ctrl(enable); } + +static void exynos5_dp_phy_control(unsigned int enable) +{ + unsigned int cfg; + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + cfg = readl(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + + writel(cfg, &power->dptx_phy_control); +} + +void set_dp_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_dp_phy_control(enable); +} diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e5467e2..d2fdb59 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -859,4 +859,9 @@ void set_usbhost_phy_ctrl(unsigned int enable); #define POWER_USB_HOST_PHY_CTRL_EN (1 << 0) #define POWER_USB_HOST_PHY_CTRL_DISABLE (0 << 0) + +void set_dp_phy_ctrl(unsigned int enable); + +#define EXYNOS_DP_PHY_ENABLE (1 << 0) + #endif -- 1.7.4.1

1 0

[U-Boot] [PATCH 2/8] EXYNOS5: support display system register control
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch supports display block system regisger control. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/cpu/armv7/exynos/system.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/armv7/exynos/system.c b/arch/arm/cpu/armv7/exynos/system.c index cc6ee03..5a6747a 100644 --- a/arch/arm/cpu/armv7/exynos/system.c +++ b/arch/arm/cpu/armv7/exynos/system.c @@ -63,8 +63,26 @@ static void exynos4_set_system_display(void) writel(cfg, &sysreg->display_ctrl); } +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = + (struct exynos5_sysreg *)samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = readl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + writel(cfg, &sysreg->disp1blk_cfg); +} + void set_system_display_ctrl(void) { if (cpu_is_exynos4()) exynos4_set_system_display(); + else + exynos5_set_system_display(); } -- 1.7.4.1

1 0

[U-Boot] [PATCH 1/8] EXYNOS5: support exynos5 lcd clock control
by Donghwa Lee 02 Jul '12

02 Jul '12

This patch support exynos5 lcd clock control. Signed-off-by: Donghwa Lee <dh09.lee(a)samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com> --- arch/arm/cpu/armv7/exynos/clock.c | 108 ++++++++++++++++++++++++++++++++++++- 1 files changed, 107 insertions(+), 1 deletions(-) diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 7326655..3143f7e 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -480,6 +480,48 @@ static unsigned long exynos4_get_lcd_clk(void) return pclk; } +/* get_lcd_clk: return lcd clock frequency */ +static unsigned long exynos5_get_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + */ + sel = readl(&clk->src_disp1_0); + sel = sel & 0xf; + + /* + * 0x6: SCLK_MPLL + * 0x7: SCLK_EPLL + * 0x8: SCLK_VPLL + */ + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + */ + ratio = readl(&clk->div_disp1_0); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + void exynos4_set_lcd_clk(void) { struct exynos4_clock *clk = @@ -542,6 +584,68 @@ void exynos4_set_lcd_clk(void) writel(cfg, &clk->div_lcd0); } +void exynos5_set_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_GATE_BLOCK + * CLK_CAM [0] + * CLK_TV [1] + * CLK_MFC [2] + * CLK_G3D [3] + * CLK_LCD0 [4] + * CLK_LCD1 [5] + * CLK_GPS [7] + */ + cfg = readl(&clk->gate_block); + cfg |= 1 << 4; + writel(cfg, &clk->gate_block); + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set lcd0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_disp1_0); + cfg &= ~(0xf); + cfg |= 0x8; + writel(cfg, &clk->src_disp1_0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for FIMD0 + */ + cfg = readl(&clk->gate_ip_disp1); + cfg |= 1 << 0; + writel(cfg, &clk->gate_ip_disp1); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set fimd ratio + */ + cfg &= ~(0xf); + cfg |= 0x0; + writel(cfg, &clk->div_disp1_0); +} + void exynos4_set_mipi_clk(void) { struct exynos4_clock *clk = @@ -680,13 +784,15 @@ unsigned long get_lcd_clk(void) if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); else - return 0; + return exynos5_get_lcd_clk(); } void set_lcd_clk(void) { if (cpu_is_exynos4()) exynos4_set_lcd_clk(); + else + exynos5_set_lcd_clk(); } void set_mipi_clk(void) -- 1.7.4.1

1 0

[U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
by Bo Shen 02 Jul '12

02 Jul '12

Add at91sam9x5ek board support, this board support the following SoCs AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35 Using at91sam9x5ek_nandflash to configure for the board Now only supports NAND with software ECC boot up This patch is based on git://git.denx.de/u-boot-atmel.git Signed-off-by: Bo Shen <voice.shen(a)atmel.com> --- Changed since v1 Modify the code according to Andreas's suggestion --- MAINTAINERS | 3 + arch/arm/cpu/arm926ejs/at91/Makefile | 1 + arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 237 +++++++++++++++ arch/arm/cpu/arm926ejs/at91/clock.c | 7 +- arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 + arch/arm/include/asm/arch-at91/at91sam9x5.h | 172 +++++++++++ arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 91 ++++++ arch/arm/include/asm/arch-at91/hardware.h | 2 + board/atmel/at91sam9x5ek/Makefile | 48 +++ board/atmel/at91sam9x5ek/at91sam9x5ek.c | 306 ++++++++++++++++++++ board/atmel/at91sam9x5ek/config.mk | 1 + boards.cfg | 1 + drivers/net/macb.c | 4 +- drivers/serial/atmel_usart.h | 7 +- include/configs/at91sam9x5ek.h | 201 +++++++++++++ 15 files changed, 1077 insertions(+), 6 deletions(-) create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5.h create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h create mode 100644 board/atmel/at91sam9x5ek/Makefile create mode 100644 board/atmel/at91sam9x5ek/at91sam9x5ek.c create mode 100644 board/atmel/at91sam9x5ek/config.mk create mode 100644 include/configs/at91sam9x5ek.h diff --git a/MAINTAINERS b/MAINTAINERS index 6438e1c..a2fccbf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -660,6 +660,9 @@ Sedji Gaouaou<sedji.gaouaou(a)atmel.com> at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) +Bo Shen <voice.shen(a)atmel.com> + at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC) + Simon Guinot <simon.guinot(a)sequanux.org> inetspace_v2 ARM926EJS (Kirkwood SoC) diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index f333753..346e58f 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o COBJS-y += clock.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c new file mode 100644 index 0000000..2c99a4e --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> +#include <../drivers/serial/atmel_usart.h> + +unsigned int get_chip_id(void) +{ + atmel_usart3_t *dbgu = (atmel_usart3_t *)ATMEL_BASE_DBGU; + + /* cidr is the same location with fidi */ + return readl(&dbgu->fidi) & ~AT91_CIDR_VERSION; +} + +unsigned int get_extension_chip_id(void) +{ + atmel_usart3_t *dbgu = (struct atmel_usart3_t *)ATMEL_BASE_DBGU; + + /* ner is the same location with fidi */ + return readl(&dbgu->ner); +} + +unsigned int has_emac1() +{ + return cpu_is_at91sam9x25(); +} + +unsigned int has_emac0() +{ + return !(cpu_is_at91sam9g15()); +} + +unsigned int has_lcdc() +{ + return cpu_is_at91sam9g15() || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_at91sam9x5()) { + switch (extension_id) { + case ARCH_EXID_AT91SAM9G15: + return CONFIG_SYS_AT91_G15_CPU_NAME; + case ARCH_EXID_AT91SAM9G25: + return CONFIG_SYS_AT91_G25_CPU_NAME; + case ARCH_EXID_AT91SAM9G35: + return CONFIG_SYS_AT91_G35_CPU_NAME; + case ARCH_EXID_AT91SAM9X25: + return CONFIG_SYS_AT91_X25_CPU_NAME; + case ARCH_EXID_AT91SAM9X35: + return CONFIG_SYS_AT91_X35_CPU_NAME; + default: + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } + } else { + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTB, 3, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 0); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (has_emac0()) { + /* Enable EMAC0 clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + /* EMAC0 pins setup */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ + } + + if (has_emac1()) { + /* Enable EMAC1 clock */ + writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); + /* EMAC1 pins setup */ + at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ + at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ + at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ + at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ + } + +#ifndef CONFIG_RMII + /* Only emac0 support MII */ + if (has_emac0()) { + at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + } +#endif +} +#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index a7085de..4d09542 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -154,7 +154,8 @@ int at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = readl(&pmc->mckr); -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) /* plla divisor by 2 */ gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif @@ -168,7 +169,9 @@ int at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) + /* mck divisor by 2 */ +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) ? freq / 3 diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index 6d97189..b9a93b0 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -23,6 +23,8 @@ #include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> +#elif defined(CONFIG_AT91SAM9X5) +#include <asm/arch/at91sam9x5_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h new file mode 100644 index 0000000..30bad24 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -0,0 +1,172 @@ +/* + * Chip-specific header file for the AT91SAM9x5 family + * + * Copyright (C) 2012 Atmel Corporation. + * + * Definitions for the SoC: + * AT91SAM9x5 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9X5_H +#define AT91SAM9X5_H + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ + +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ +#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define ATMEL_ID_USART0 5 /* USART 0 */ +#define ATMEL_ID_USART1 6 /* USART 1 */ +#define ATMEL_ID_USART2 7 /* USART 2 */ +#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */ +#define ATMEL_ID_HSMCI0 12 /* High Speed Multimedia Card Interface 0 */ +#define ATMEL_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_UART0 15 /* UART 0 */ +#define ATMEL_ID_UART1 16 /* UART 1 */ +#define ATMEL_ID_TC01 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define ATMEL_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define ATMEL_ID_ADC 19 /* ADC Controller */ +#define ATMEL_ID_DMAC0 20 /* DMA Controller 0 */ +#define ATMEL_ID_DMAC1 21 /* DMA Controller 1 */ +#define ATMEL_ID_UHPHS 22 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 23 /* USB Device High Speed */ +#define ATMEL_ID_EMAC0 24 /* Ethernet MAC0 */ +#define ATMEL_ID_LCDC 25 /* LCD Controller */ +#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */ +#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */ +#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */ +#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define ATMEL_BASE_SPI0 0xf0000000 +#define ATMEL_BASE_SPI1 0xf0004000 +#define ATMEL_BASE_HSMCI0 0xf0008000 +#define ATMEL_BASE_HSMCI1 0xf000c000 +#define ATMEL_BASE_SSC 0xf0010000 +#define ATMEL_BASE_CAN0 0xf8000000 +#define ATMEL_BASE_CAN1 0xf8004000 +#define ATMEL_BASE_TC0 0xf8008000 +#define ATMEL_BASE_TC1 0xf8008040 +#define ATMEL_BASE_TC2 0xf8008080 +#define ATMEL_BASE_TC3 0xf800c000 +#define ATMEL_BASE_TC4 0xf800c040 +#define ATMEL_BASE_TC5 0xf800c080 +#define ATMEL_BASE_TWI0 0xf8010000 +#define ATMEL_BASE_TWI1 0xf8014000 +#define ATMEL_BASE_TWI2 0xf8018000 +#define ATMEL_BASE_USART0 0xf801c000 +#define ATMEL_BASE_USART1 0xf8020000 +#define ATMEL_BASE_USART2 0xf8024000 +#define ATMEL_BASE_USART3 0xf8028000 +#define ATMEL_BASE_EMAC0 0xf802c000 +#define ATMEL_BASE_EMAC1 0xf8030000 +#define ATMEL_BASE_PWM 0xf8034000 +#define ATMEL_BASE_LCDC 0xf8038000 +#define ATMEL_BASE_UDPHS 0xf803c000 +#define ATMEL_BASE_UART0 0xf8040000 +#define ATMEL_BASE_UART1 0xf8044000 +#define ATMEL_BASE_ISI 0xf8048000 +#define ATMEL_BASE_ADC 0xf804c000 +#define ATMEL_BASE_SYS 0xffffc000 + +/* + * System Peripherals (offset from ATMEL_BASE_SYS) + */ +#define ATMEL_BASE_MATRIX 0xffffde00 +#define ATMEL_BASE_PMECC 0xffffe000 +#define ATMEL_BASE_PMERRLOC 0xffffe600 +#define ATMEL_BASE_DDRSDRC 0xffffe800 +#define ATMEL_BASE_SMC 0xffffea00 +#define ATMEL_BASE_DMAC0 0xffffec00 +#define ATMEL_BASE_DMAC1 0xffffee00 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_DBGU 0xfffff200 +#define ATMEL_BASE_PIOA 0xfffff400 +#define ATMEL_BASE_PIOB 0xfffff600 +#define ATMEL_BASE_PIOC 0xfffff800 +#define ATMEL_BASE_PIOD 0xfffffa00 +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffe00 +#define ATMEL_BASE_SHDWC 0xfffffe10 +#define ATMEL_BASE_PIT 0xfffffe30 +#define ATMEL_BASE_WDT 0xfffffe40 +#define ATMEL_BASE_GPBR 0xfffffe60 +#define ATMEL_BASE_RTC 0xfffffeb0 + +/* + * Internal Memory. + */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */ +#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */ +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ + +/* 9x5 series chip id definitions */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + +#define cpu_is_at91sam9x5() (get_chip_id() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X35)) + +/* + * Cpu Name + */ +#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15" +#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25" +#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35" +#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25" +#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35" +#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type" +#define ATMEL_CPU_NAME get_cpu_name() + +/* + * Other misc defines + */ +#define ATMEL_PIO_PORTS 5 +#define CPU_HAS_PIO3 +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ + +/* + * at91sam9x5 specific prototypes + */ +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_emac1(void); +unsigned int has_emac0(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h new file mode 100644 index 0000000..cbc350c --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h @@ -0,0 +1,91 @@ +/* + * Matrix-centric header file for the AT91SAM9M1x family + * + * Copyright (C) 2008 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_MATRIX_H +#define AT91SAM9G45_MATRIX_H + +#ifndef __ASSEMBLY__ + +struct at91_matrix { + u32 mcfg[16]; + u32 scfg[16]; + u32 pras[16][2]; + u32 mrcr; /* 0x100 Master Remap Control */ + u32 filler[7]; + u32 ebicsa; + u32 filler4[47]; + u32 wpmr; + u32 wpsr; +}; + +#endif /* __ASSEMBLY__ */ + +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18 + +#define AT91_MATRIX_M0PR_SHIFT 0 +#define AT91_MATRIX_M1PR_SHIFT 4 +#define AT91_MATRIX_M2PR_SHIFT 8 +#define AT91_MATRIX_M3PR_SHIFT 12 +#define AT91_MATRIX_M4PR_SHIFT 16 +#define AT91_MATRIX_M5PR_SHIFT 20 +#define AT91_MATRIX_M6PR_SHIFT 24 +#define AT91_MATRIX_M7PR_SHIFT 28 + +#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */ +#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */ +#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */ +#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */ + +#define AT91_MATRIX_RCB0 (1 << 0) +#define AT91_MATRIX_RCB1 (1 << 1) +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) + +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_DBPD_ON (0 << 9) +#define AT91_MATRIX_EBI_DBPD_OFF (1 << 9) +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#endif diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 85c2889..4c4ee70 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -37,6 +37,8 @@ # include <asm/arch/at91sam9rl.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) # include <asm/arch/at91sam9g45.h> +#elif defined(CONFIG_AT91SAM9X5) +# include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> #elif defined(CONFIG_AT91X40) diff --git a/board/atmel/at91sam9x5ek/Makefile b/board/atmel/at91sam9x5ek/Makefile new file mode 100644 index 0000000..1c9a4b6 --- /dev/null +++ b/board/atmel/at91sam9x5ek/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian(a)popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += at91sam9x5ek.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c new file mode 100644 index 0000000..ff8c518 --- /dev/null +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -0,0 +1,306 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9x5_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_hlcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif +#include <netdev.h> +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> +#endif +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ +#ifdef CONFIG_CMD_NAND +static void at91sam9x5ek_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + unsigned long csa; + + /* Enable CS3 */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); + + writel(1 << ATMEL_ID_PIOCD, &pmc->pcer); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 1); + at91_set_a_periph(AT91_PIO_PORTD, 7, 1); + at91_set_a_periph(AT91_PIO_PORTD, 8, 1); + at91_set_a_periph(AT91_PIO_PORTD, 9, 1); + at91_set_a_periph(AT91_PIO_PORTD, 10, 1); + at91_set_a_periph(AT91_PIO_PORTD, 11, 1); + at91_set_a_periph(AT91_PIO_PORTD, 12, 1); + at91_set_a_periph(AT91_PIO_PORTD, 13, 1); +} +#endif + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + if (has_emac0()) + rc = macb_eth_initialize(0, + (void *)ATMEL_BASE_EMAC0, 0x00); + if (has_emac1()) + rc = macb_eth_initialize(1, + (void *)ATMEL_BASE_EMAC1, 0x00); +#endif + return rc; +} + +#ifdef CONFIG_MACB +static void at91sam9x5ek_macb_hw_init(void) +{ + at91_macb_hw_init(); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 800, + .vl_row = 480, + .vl_clk = 24000000, + .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL, + .vl_bpix = LCD_BPP, + .vl_tft = 1, + .vl_clk_pol = 1, + .vl_hsync_len = 128, + .vl_left_margin = 64, + .vl_right_margin = 64, + .vl_vsync_len = 2, + .vl_upper_margin = 22, + .vl_lower_margin = 21, + .mmio = ATMEL_BASE_LCDC, +}; + +void lcd_enable(void) +{ + if (has_lcdc()) + at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */ +} + +void lcd_disable(void) +{ + if (has_lcdc()) + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */ +} + +static void at91sam9x5ek_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (has_lcdc()) { + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */ + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + } +} + +#ifdef CONFIG_LCD_INFO +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + if (has_lcdc()) { + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("(C) 2012 ATMEL Corp\n"); + lcd_printf("at91support(a)atmel.com\n"); + lcd_printf("%s CPU at %s MHz\n", + get_cpu_name(), + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20); + } +} +#endif /* CONFIG_LCD_INFO */ +#endif /* CONFIG_LCD */ + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PA7, 0); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PA14, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_gpio_output(AT91_PIN_PA7, 1); + break; + case 0: + default: + at91_set_gpio_output(AT91_PIN_PA14, 1); + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ + +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* arch number of ATMELEK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_CMD_NAND + at91sam9x5ek_nand_hw_init(); +#endif + +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 0); + at91_spi0_hw_init(1 << 4); +#endif + +#ifdef CONFIG_MACB + at91sam9x5ek_macb_hw_init(); +#endif + +#ifdef CONFIG_LCD + at91sam9x5ek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk new file mode 100644 index 0000000..6589a12 --- /dev/null +++ b/board/atmel/at91sam9x5ek/config.mk @@ -0,0 +1 @@ +CONFIG_SYS_TEXT_BASE = 0x26f00000 diff --git a/boards.cfg b/boards.cfg index 9205070..c9bd1b3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -89,6 +89,7 @@ at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH +at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 4578467..8f55cdc 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -471,7 +471,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9XE) + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); @@ -480,7 +480,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9XE) + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/serial/atmel_usart.h b/drivers/serial/atmel_usart.h index 7e4b2c9..ad1d9f0 100644 --- a/drivers/serial/atmel_usart.h +++ b/drivers/serial/atmel_usart.h @@ -37,8 +37,8 @@ typedef struct atmel_usart3 { u32 rtor; u32 ttgr; u32 reserved0[5]; - u32 fidi; - u32 ner; + u32 fidi; /* cidr for dbgu */ + u32 ner; /* exid for dbgu */ u32 reserved1; u32 ifr; u32 man; @@ -289,6 +289,9 @@ typedef struct atmel_usart3 { /* Constants for FI_DI_RATIO */ #define USART3_FI_DI_RATIO_DISABLE 0 +/* chip revision mask */ +#define AT91_CIDR_VERSION 0x1f + /* Bit manipulation macros */ #define USART3_BIT(name) \ (1 << USART3_##name##_OFFSET) diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h new file mode 100644 index 0000000..9aba52c --- /dev/null +++ b/include/configs/at91sam9x5ek.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * Configuation settings for the AT91SAM9X5EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#include <asm/hardware.h> + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91SAM9X5EK +#define CONFIG_AT91FAMILY + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#ifdef CONFIG_ATMEL_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SYS_MAX_DATAFLASH_BANKS +#endif + +/* no NOR flash */ +#define CONFIG_SYS_NO_FLASH + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 + +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R +#define CONFIG_MACB_SEARCH_PHY + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x26e00000 + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_MONITOR_BASE (0x10000000 + 0x8400) +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_ADDR (0x10000000 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x42000 0x300000; " \ + "bootm 0x22000000" +#else /* CONFIG_SYS_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read.jffs2 " \ + "0x22000000 0x200000 0x300000; " \ + "bootm 0x22000000" +#endif + +#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \ + "mtdparts=atmel_nand:" \ + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock1 rw " \ + "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs" + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ + + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif -- 1.7.9.5

4 7

[U-Boot] [PATCH 00/10 V4] EXYNOS5: Support for Exynos5250 Rev 1.0
by Rajeshwari Shinde 02 Jul '12

02 Jul '12

This patch set adds support for Exynos5250 Rev 1.0. Exynos5250 Rev 1.0 supports DDR3 Memory configuration and support for LPDDR2 is removed. Exynos5250 Rev 1.0 supports DWMMC controller and does not support SDHCI controller. After DWMMC driver is added to Mainline support for generic S5P MMC driver will be removed. Due to Support of SDHCI controller currently still there for EXYNOS5 you can see the following error on boot. mmc_reset: timeout error mmc_change_clock: timeout error mmc_send_cmd: waiting for status update MMC init failed Changes in V2: - Included Paramateric structure with in #ifndef __ASSEMBLY__. Chnages in V3: - Incorporated the review comments. - Added support for BPLL. - Corrected the gpio pinmux settings. Changes in V4: - Corrected a warning message Rajeshwari Shinde (10): ARCH: SPL: Add parametric board initializer SMDK5250: SPL: Define parametric board initializer SMDK5250: Add smdk5250-uboot-spl.lds EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Add BPLL support EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0 arch/arm/cpu/armv7/exynos/clock.c | 28 +- arch/arm/cpu/armv7/exynos/pinmux.c | 22 +- arch/arm/include/asm/arch-exynos/clk.h | 1 + arch/arm/include/asm/arch-exynos/clock.h | 237 +++++---- arch/arm/include/asm/arch-exynos/dmc.h | 65 +++ arch/arm/include/asm/arch-exynos/gpio.h | 7 +- arch/arm/include/asm/arch-exynos/spl.h | 97 ++++ board/samsung/smdk5250/Makefile | 3 +- board/samsung/smdk5250/clock_init.c | 714 +++++++++++++++++++---- board/samsung/smdk5250/clock_init.h | 149 +++++ board/samsung/smdk5250/dmc_common.c | 199 +++++++ board/samsung/smdk5250/dmc_init.c | 462 --------------- board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++++++ board/samsung/smdk5250/setup.h | 762 +++++++++++++++---------- board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +++ board/samsung/smdk5250/smdk5250.c | 6 +- board/samsung/smdk5250/smdk5250_spl.c | 68 +++ include/configs/smdk5250.h | 7 +- 18 files changed, 2099 insertions(+), 1022 deletions(-) create mode 100644 arch/arm/include/asm/arch-exynos/spl.h create mode 100644 board/samsung/smdk5250/clock_init.h create mode 100644 board/samsung/smdk5250/dmc_common.c delete mode 100644 board/samsung/smdk5250/dmc_init.c create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds create mode 100644 board/samsung/smdk5250/smdk5250_spl.c -- 1.7.4.4

3 15